REDSTONE-IF-MIB
REDSTONE-IF-MIB provides vendor-specific extensions to the standard IF-MIB for Redstone Communications Inc. hardware, enabling the monitoring of interface status, traffic counters, and error statistics on Redstone network devices.
Imported Objects
Objects
16 total| Object Name |
|---|
rsIfMIBThe Generic Interfaces MIB for the Redstone Communications Inc. enterprise. MODULE-IDENTITY .1.3.6.1.4.1.2773.2.3 |
rsInterfaces OBJECT IDENTIFIER .1.3.6.1.4.1.2773.2.3.1 |
rsIf OBJECT IDENTIFIER .1.3.6.1.4.1.2773.2.3.1.1 |
rsIfObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2773.2.3.1.1.1 |
rsIfTableThis table contains a corresponding entry for each entry found in the standard Generic Interfaces MIB ifTable/ifXTable. The entries in this table contain supplementary generic interface characteristics. Entries in ifTable/ifXTable and in this table are created/deleted as a consequence of hardware detection, or of management configuration via standard or enterprise type-specific interface MIBs. SEQUENCE OF RsIfEntry .1.3.6.1.4.1.2773.2.3.1.1.1.1 |
rsIfEntryAn entry representing an interface's enterprise-defined generic interface characteristics. RsIfEntry .1.3.6.1.4.1.2773.2.3.1.1.1.1.1 |
rsIfTypeIdentifies the type of this interface.ro RsIfType .1.3.6.1.4.1.2773.2.3.1.1.1.1.1.1 |
rsIfInvStackTableA table containing information on the relationships between the multiple sub-layers of network interfaces. In particular, it contains information on which sub-layers run 'underneath' which other sub-layers, where each sub-layer corresponds to a conceptual row in the ifTable. For example, when the sub-layer with ifIndex value x runs underneath the sub-layer with ifIndex value y, then this table contains: rsIfInvStackStatus.x.y=active For each ifIndex value, I, which identifies an active interface, there are always at least two instantiated rows in this table associated with I. For one of these rows, I is the value of ifStackHigherLayer; for the other, I is the value of ifStackLowerLayer. (If I is not involved in multiplexing, then these are the only two rows associated with I.) For example, two rows exist even for an interface which has no others stacked on top or below it: ifStackStatus.x.0=active ifStackStatus.0.x=active This table contains exactly the same number of rows as the ifStackTable, but the rows appear in a different order. SEQUENCE OF RsIfInvStackEntry .1.3.6.1.4.1.2773.2.3.1.1.1.2 |
rsIfInvStackEntryInformation on a particular relationship between two sub- layers, specifying that one sub-layer runs underneath the other sub-layer. Each sub-layer corresponds to a conceptual row in the ifTable. RsIfInvStackEntry .1.3.6.1.4.1.2773.2.3.1.1.1.2.1 |
rsIfInvStackStatusThe status of the relationship between two sub-layers. An instance of this object exists for each instance of the ifStackStatus object, and vice versa. For example, if the variable ifStackStatus.H.L exists, then the variable rsIfInvStackStatus.L.H must also exist, and vice versa. In addition, the two variables always have the same value. However, unlike ifStackStatus, the rsIfInvStackStatus object is NOT write-able. A network management application wishing to change a relationship between sub-layers H and L cannot do so by modifying the value of rsIfInvStackStatus.L.H, but must instead modify the value of ifStackStatus.H.L. After the ifStackTable is modified, the change will be reflected in this table.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2773.2.3.1.1.1.2.1.1 |
rsIfConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2773.2.3.1.1.4 |
rsIfCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2773.2.3.1.1.4.1 |
rsIfComplianceThe compliance statement for entities which implement the Redstone Generic Interfaces MIB. Unknown .1.3.6.1.4.1.2773.2.3.1.1.4.1.1 |
rsIfGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2773.2.3.1.1.4.2 |
rsIfGroupA collection of objects providing management capability capability of generic interfaces in a Redstone product. Unknown .1.3.6.1.4.1.2773.2.3.1.1.4.2.1 |
rsIfInvStackGroupA collection of objects providing inverted information on the layering of MIB-II interfaces. Unknown .1.3.6.1.4.1.2773.2.3.1.1.4.2.2 |
More MIBs from Redstone
Browse all RedstoneMIBs →The REDSTONE-PPP-MIB provides vendor-specific management objects for monitoring Point-to-Point Protocol (PPP) interface states, session statistics, and error counters on Redstone Communications Inc. hardware. This module enables the tracking of link establishment failures, authentication status, and data throughput metrics specific to Redstone's PPP implementations.
The REDSTONE-FRAME-RELAY-MIB enables monitoring and management of Frame Relay interface statistics, DLCI status, and traffic counters on Redstone Communications Inc. networking hardware. This module provides standard SNMP access to Layer 2 Frame Relay protocol states and performance metrics specific to the vendor's equipment.
The REDSTONE-RADIUS-CLIENT-MIB enables monitoring and management of Redstone Communications RADIUS client instances, specifically tracking authentication session states, request/reply counters, and client connectivity status for enterprise AAA infrastructure.
SNMP MIB module
SNMP MIB module
The REDSTONE-ATM-MIB provides vendor-specific management interfaces for Redstone Communications ATM switches, enabling the monitoring of Asynchronous Transfer Mode cell traffic statistics, interface status, and virtual circuit configurations. This module facilitates the collection of standard ATM performance counters and error metrics required for troubleshooting and capacity planning within Redstone ATM network infrastructure.