RAISECOM-POWERMONITOR-MIB
The RAISECOM-POWERMONITOR-MIB enables SNMP-based monitoring of power supply unit status, voltage levels, current draw, and temperature sensors on Raisecom network hardware. This module facilitates real-time fault detection and capacity planning by exposing critical electrical parameters required for infrastructure reliability.
Imported Objects
Objects
15 total| Object Name |
|---|
raisecomPowerMonitorThe initial revision of this MIB. MODULE-IDENTITY .1.3.6.1.4.1.8886.1.24 |
raisecomPowerMonitorNotification OBJECT IDENTIFIER .1.3.6.1.4.1.8886.1.24.1 |
raisecomPowerVoltNormalThe trap notification occur when power-card value translating from abnormal to normal. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.24.1.1 |
raisecomPowerVoltAbnormalThe trap notification occur when power-card value translating from normal to abnormal. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.24.1.2 |
raisecomPowerStatusTrapA raisecomPowerTrap trap is sent when a power alarm generate. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.24.1.3 |
raisecomDyingGaspTrapDying gasp. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.24.1.4 |
raisecomPowerMonitorMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.8886.1.24.2 |
raisecomPowerMonitorStateTablePower monitor state table. SEQUENCE OF RaisecomPowerMonitorStateEntry .1.3.6.1.4.1.8886.1.24.2.1 |
raisecomPowerMonitorStateEntryPower monitor state entry. RaisecomPowerMonitorStateEntry .1.3.6.1.4.1.8886.1.24.2.1.1 |
raisecomPowerIndexSpecify the sequence number of Power. Unsigned32 .1.3.6.1.4.1.8886.1.24.2.1.1.1 |
raisecomPowerSerialNumberspecify the identical serial number of current power card, this string number will be set when device leaving factoryro OCTET STRING .1.3.6.1.4.1.8886.1.24.2.1.1.2 |
raisecomPowerTypeSpecify the current type of the power. ac(1) means the current power AC Input. dc(2) means the current power DC Input.ro Enumeration .1.3.6.1.4.1.8886.1.24.2.1.1.3 |
raisecomPowerVoltReferenceSpecify the reference of the volt value of Power.ro INTEGER .1.3.6.1.4.1.8886.1.24.2.1.1.4 |
raisecomPowerVoltValueSpecify the volt value of Power.ro INTEGER .1.3.6.1.4.1.8886.1.24.2.1.1.5 |
raisecomPowerStatusThe status of power alarm.ro Enumeration .1.3.6.1.4.1.8886.1.24.2.1.1.6 |
More MIBs from Raisecom
Browse all RaisecomMIBs →The RAISECOM-OPTICAL-TRANSCEIVER-MIB enables SNMP-based monitoring of physical layer optical parameters, including received/transmitted optical power, laser bias current, temperature, and supply voltage, on RAISECOM network element interfaces.
The RAISECOM-SYSTEM-MIB provides standard SNMP access to monitor global hardware and software state metrics, including system uptime, CPU utilization, memory usage, and environmental sensors, across all Raisecom network platforms.
Standard SNMP MIB module defining data structures for RAISECOM-BASE-MIB.
The RAISECOM-PON-DEVICE-MIB defines managed objects for monitoring and configuring physical and logical attributes of RAISECOM Passive Optical Network (PON) access devices, including Optical Line Terminal (OLT) and Optical Network Unit (ONU) hardware status, port states, and system resources.
The RAISECOM-OPTICAL-MONITOR-MIB enables SNMP-based monitoring of optical interface parameters, including received/transmitted optical power, laser bias current, and temperature, on Raisecom network elements.
Standard SNMP MIB module defining data structures for RAISECOM-PONSERIES-BASE-MIB.