RAISECOM-OPTICAL-TRANSCEIVER-MIB
AI MIB Summary
The RAISECOM-OPTICAL-TRANSCEIVER-MIB enables SNMP-based monitoring of physical layer optical parameters, including received/transmitted optical power, laser bias current, temperature, and supply voltage, on RAISECOM network element interfaces.
This MIB module defines objects to monitor optical characteristics on the optical interfaces in a network element.
Main OID:
raisecomOpticalTransceiver.1.3.6.1.4.1.8886.1.18
184
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
184 total| Object Name |
|---|
raisecomOpticalTransceiverThis MIB module defines objects to monitor optical
characteristics on the optical interfaces in a network element. MODULE-IDENTITY .1.3.6.1.4.1.8886.1.18 |
raisecomOpticalTransceiverGlobalEnable OBJECT IDENTIFIER .1.3.6.1.4.1.8886.1.18.1 |
raisecomOpticalTransceiverNotifyEnableThis object specifies the generation of device notifications,
enable or disable.
this object belongs to xfp and sfp.rw EnableVar .1.3.6.1.4.1.8886.1.18.1.1 |
raisecomOpticalTransceiverDDMEnableEnable or disable digitaldiagnotic on the device.
this object belongs to xfp and sfp.rw EnableVar .1.3.6.1.4.1.8886.1.18.1.2 |
raisecomOpticalTransceiverCheckPwdEnableThis object specifies the status of password checking on the device,
enable or disable.
this object belongs to xfp.rw EnableVar .1.3.6.1.4.1.8886.1.18.1.3 |
raisecomOpticalTransceiverPollIntervalThis object specifies the value of poll-interval on the device.
this object belongs to xfp and sfp.rw INTEGER .1.3.6.1.4.1.8886.1.18.1.4 |
raisecomOpticalTransceiverObjects OBJECT IDENTIFIER .1.3.6.1.4.1.8886.1.18.2 |
raisecomOpticalTransceiverInfoGroup OBJECT IDENTIFIER .1.3.6.1.4.1.8886.1.18.2.1 |
raisecomOpticalTransceiverInfoTableTrancetver information Table. SEQUENCE OF RaisecomOpticalTransceiverInfoEntry .1.3.6.1.4.1.8886.1.18.2.1.1 |
raisecomOpticalTransceiverInfoEntryAn entry in the raisecomOpticalTransceiverInfoTable. RaisecomOpticalTransceiverInfoEntry .1.3.6.1.4.1.8886.1.18.2.1.1.1 |
raisecomOpticalTransceiverTypeThis object specifies the physical type of the transceiver,
such as xfp or sfp , and so on.
this object belongs to xfp and sfp.ro Enumeration .1.3.6.1.4.1.8886.1.18.2.1.1.1.1 |
raisecomOpticalTransceiverConnectorTypeThis object specifies the connector type of the transceiver,
unknown, sc, db9, hssdc, bnc-tnc, fiber-coaxial-head, fiber-outlet,
lc, mt-rj, mu, sg, fiber-pigtail, mpo-parallel-optic , hssdcII,
copper, rj45.
this object belongs to xfp and sfp.ro Enumeration .1.3.6.1.4.1.8886.1.18.2.1.1.1.2 |
raisecomOpticalTransceiverVendorNameVendor name of the interface.
this object belongs to xfp and sfp.ro OCTET STRING .1.3.6.1.4.1.8886.1.18.2.1.1.1.3 |
raisecomOpticalTransceiverVendorPNVendor part number of the interface.
this object belongs to xfp and sfp.ro OCTET STRING .1.3.6.1.4.1.8886.1.18.2.1.1.1.4 |
raisecomOpticalTransceiverVendorSNVendor serial number of the interface.
this object belongs to xfp and sfp.ro OCTET STRING .1.3.6.1.4.1.8886.1.18.2.1.1.1.5 |
raisecomOpticalTransceiverMediaTypeTypes of the fiber,
single-mode, multi-modeE50, multi-mode50,multi-mode625,copper.
single-modeKm,multi-modeOM3
this object belongs to xfp and sfp.ro Enumeration .1.3.6.1.4.1.8886.1.18.2.1.1.1.6 |
raisecomOpticalTransceiverTransmissionDistanceThe max distance which the interface could transmit,
measured in meter.
The object will be shown in unit of Km, and the precision is 0.001.
this object belongs to xfp and sfp.ro Integer32 .1.3.6.1.4.1.8886.1.18.2.1.1.1.7 |
raisecomOpticalTransceiverAbilityThis object specifies the ability of optical module digitaldiagnotic
funtion. Currently, the digitaldiagnotic objects of our optical module
inculde 16 parameters.
this object has 32 bits, each bit represents a digital diagnotic parameter.
if the bit value is 0, it means that the optical module does not provide
digital diagnotic funtion for relative parameter.if the bit value is 1,it
means that the optical module provides digital diagnotic funtion for
relative parameter.
this object belongs to xfp and sfp.
The relation between parameters and bits is following:
32......16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1:
The relation between parameters and bits is following:
32......16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1:
But when the optical module is sfp, the 6 bit will represents
the supplyVoltage of sfp.ro Unsigned32 .1.3.6.1.4.1.8886.1.18.2.1.1.1.8 |
raisecomOpticalTransceiverDDMThis object specifies if the transceiver supports on digital diagnostic function,
support or not support.To the xfp, the default value of this object is support.
this object belongs to xfp and sfp.ro Enumeration .1.3.6.1.4.1.8886.1.18.2.1.1.1.9 |
raisecomOpticalTransceiverCalibrationTypeThis object specifies the calibration type of the transceiver,
internal, external, unknown.
this object belongs to xfp and sfp.ro Enumeration .1.3.6.1.4.1.8886.1.18.2.1.1.1.10 |
raisecomOpticalTransceiverRSSIThis object specifies the calibration type of the transceiver,
support or not support.
this object belongs to xfp and sfp.ro Enumeration .1.3.6.1.4.1.8886.1.18.2.1.1.1.11 |
raisecomOpticalTransceiverVendorRevthe version number of the transceiver.
this object belongs to xfp and sfp.ro OCTET STRING .1.3.6.1.4.1.8886.1.18.2.1.1.1.12 |
raisecomOpticalTransceiverBRMaxthe min data rate of the transceiver,mesured in Mbps .
this object belongs to xfp and sfp.
The object will be shown in unit of Gbps, and the precision is 0.1.ro INTEGER .1.3.6.1.4.1.8886.1.18.2.1.1.1.13 |
raisecomOpticalTransceiverBRMinthe min data rate of the transceiver,mesured in Mbps.
this object belongs to xfp and sfp.To the sfp,
the min data rate value is equal to the max data rate value.
The object will be shown in unit of Gbps, and the precision is 0.1.ro INTEGER .1.3.6.1.4.1.8886.1.18.2.1.1.1.14 |
raisecomOpticalTransceiverWavelengthContrlif the transceiver supports on wavelength control
support,notsupport.
this object belongs to xfp.ro Enumeration .1.3.6.1.4.1.8886.1.18.2.1.1.1.15 |
raisecomOpticalTransceiverWavelengthWavelength of the interface, measured in pm(0.001nm).
this object belongs to xfp.
The object will be shown in unit of nm, and the precision is 0.01.ro Integer32 .1.3.6.1.4.1.8886.1.18.2.1.1.1.16 |
raisecomOpticalTransceiverWaveTolerancethe range of laser wavelength from nominal wavelength,mesured in pm(0.001*nm).
this object belongs to xfp.
The object will be shown in unit of nm, and the precision is 0.01.ro OCTET STRING .1.3.6.1.4.1.8886.1.18.2.1.1.1.17 |
raisecomOpticalTransceiverCompatibilitythe compatibility type that the transceiver supports,such as 10GBASE-SR.
this object belongs to xfp.ro OCTET STRING .1.3.6.1.4.1.8886.1.18.2.1.1.1.18 |
raisecomOpticalTransceiverPowerDissipationthe max power dissipation of the transceiver,
p1W5,p2W5,p3W5,exceed3W5.
this object belongs to xfp.ro Enumeration .1.3.6.1.4.1.8886.1.18.2.1.1.1.19 |
raisecomOpticalTransceiverCDRthe optical module supports on CDR fundtion.
support,notsupport.
this object belongs to xfp.ro Enumeration .1.3.6.1.4.1.8886.1.18.2.1.1.1.20 |
raisecomOpticalTransceiverRefClockif the transceiver requires outside reference clock
required,notrequired.
this object belongs to xfp.ro Enumeration .1.3.6.1.4.1.8886.1.18.2.1.1.1.21 |
raisecomOpticalTransceiverTransmitterTypeThe transmitter type of the transceiver,such as 850 nm VCSEL.
this object belongs to xfp.ro Enumeration .1.3.6.1.4.1.8886.1.18.2.1.1.1.22 |
raisecomOpticalTransceiverCooledThe transmitter cooled type of the transceiver
cooled,uncooled.
this object belongs to xfp.ro Enumeration .1.3.6.1.4.1.8886.1.18.2.1.1.1.24 |
raisecomOpticalTransceiverTunalbeThe transmitter tunable type of the transceiver
tunable,untunable.
this object belongs to xfp.ro Enumeration .1.3.6.1.4.1.8886.1.18.2.1.1.1.25 |
raisecomOpticalTransceiverDetectorTypeThe detector type of the transceiver
pin, apd.
this object belongs to xfp.ro Enumeration .1.3.6.1.4.1.8886.1.18.2.1.1.1.26 |
raisecomOpticalTransceiverLineLoopBackThe transceiver support status of sideline loop-back control
support,notsupport.
this object belongs to xfp.ro Enumeration .1.3.6.1.4.1.8886.1.18.2.1.1.1.27 |
raisecomOpticalTransceiverXFILoopBackThe transceiver support status of XFI loop-back control
support,notsupport.
this object belongs to xfp.ro Enumeration .1.3.6.1.4.1.8886.1.18.2.1.1.1.28 |
raisecomOpticalTransceiverVpsThis object specifies if the optical module supports on VPS
support,notsupport.
this object belongs to xfp.ro Enumeration .1.3.6.1.4.1.8886.1.18.2.1.1.1.29 |
raisecomOpticalTransceiverTxDisThe transceiver support status of software control the transmitter status
support,notsupport.
this object belongs to xfp.ro Enumeration .1.3.6.1.4.1.8886.1.18.2.1.1.1.30 |
raisecomOpticalTransceiverStandbyThe transceiver support status of software control the standby mode.
support,notsupport.
this object belongs to xfp.ro Enumeration .1.3.6.1.4.1.8886.1.18.2.1.1.1.31 |
raisecomOpticalTransceiverInVpsLowPowerThe VPS in low power support status of the transceiver
support,notsupport.
this object belongs to xfp.ro Enumeration .1.3.6.1.4.1.8886.1.18.2.1.1.1.32 |
raisecomOpticalTransceiverOutVpsLowPowerThe VPS out low power support status of the transceiver
support,notsupport.
this object belongs to xfp.ro Enumeration .1.3.6.1.4.1.8886.1.18.2.1.1.1.33 |
raisecomOpticalTransceiverFECThe FEC support status of transceiver
support,notsupport.
this object belongs to xfp.ro Enumeration .1.3.6.1.4.1.8886.1.18.2.1.1.1.34 |
raisecomOpticalTransceiverCMUThe CMU support status of transceiver
support,notsupport.
this object belongs to xfp.ro Enumeration .1.3.6.1.4.1.8886.1.18.2.1.1.1.35 |
raisecomOpticalTransceiverBRThis object specifies the Nominal bitrate of the transceiver,
125Mbps, 155Mbps, 622Mbps, 1.25Gbps, 2.5Gbps.
this object belongs to xfp and sfp.ro Enumeration .1.3.6.1.4.1.8886.1.18.2.1.1.1.36 |
raisecomOpticalTransceiverDDMGroup OBJECT IDENTIFIER .1.3.6.1.4.1.8886.1.18.2.2 |
raisecomOpticalTransceiverDDMTableThis table provides objects to monitor optical
parameters in a network element. SEQUENCE OF RaisecomOpticalTransceiverDDMEntry .1.3.6.1.4.1.8886.1.18.2.2.1 |
raisecomOpticalTransceiverDDMEntryAn entry in the raisecomOpticalTransceiverMonTable provides objects to
monitor an optical parameter at an optical interface. RaisecomOpticalTransceiverDDMEntry .1.3.6.1.4.1.8886.1.18.2.2.1.1 |
raisecomOpticalTransceiverParameterTypeThis object specifies the optical parameter that is being
monitored in this entry.
This object belongs to xfp/sfp. OpticalParameterType .1.3.6.1.4.1.8886.1.18.2.2.1.1.1 |
raisecomOpticalTransceiverParameterValueThis object gives the value measured for the particular
optical parameter specified by the raisecomOpticalMonParameterType
object.
This object belongs to xfp/sfp.ro OpticalParameterValue .1.3.6.1.4.1.8886.1.18.2.2.1.1.2 |
raisecomOpticalTransceiverParamHighAlarmThreshThis object gives the high alarm threshold on the
optical parameter being monitored.
An alarm condition will be raised if the value given by
raisecomOpticalParameterValue goes from below the value of
this object to above the value of this object, or if
the initial value of raisecomOpticalParameterValue exceeds the value
of this object. This alarm will be indicated in the
raisecomOpticalParamAlarmStatus object.
This object belongs to xfp/sfp.ro OpticalParameterValue .1.3.6.1.4.1.8886.1.18.2.2.1.1.3 |
raisecomOpticalTransceiverParamHighWarningThreshThis object is used to set a high warning threshold on
the optical parameter being monitored.
A threshold crossing condition will be indicated if the value
given by raisecomOpticalParameterValue goes from below the value
of this object to above the value of this
object, or if the initial value of raisecomOpticalParameterValue
exceeds the value of this object. This alarm will be indicated in the
raisecomOpticalParamAlarmStatus object.
This object belongs to xfp/sfp.ro OpticalParameterValue .1.3.6.1.4.1.8886.1.18.2.2.1.1.4 |
raisecomOpticalTransceiverParamLowAlarmThreshThis object is used to set a low alarm threshold on the
optical parameter being monitored.
An alarm condition will be raised if the value given by
raisecomOpticalParameterValue goes from above the value of
this object to below the value of this object, or if
the initial value of raisecomOpticalParameterValue is lower than the
value of this object. This alarm
will be indicated in the raisecomOpticalParamAlarmStatus object ..
This object belongs to xfp/sfp.ro OpticalParameterValue .1.3.6.1.4.1.8886.1.18.2.2.1.1.5 |
raisecomOpticalTransceiverParamLowWarningThreshThis object is used to set a low warning threshold on
the optical parameter being monitored.
A threshold crossing condition will be indicated if the value
given by raisecomOpticalParameterValue goes from above the value
of this object to below the value of this
object, or if the initial value of raisecomOpticalParameterValue
object is lower than the value of this object. For
network elements in the status
indications, this threshold violation will be indicated in the
raisecomOpticalParamAlarmStatus object .
This object belongs to xfp/sfp.ro OpticalParameterValue .1.3.6.1.4.1.8886.1.18.2.2.1.1.6 |
raisecomOpticalTransceiverParamAlarmStatusThis object is used to indicate the current status of
the thresholds for the monitored optical parameter
on the interface.
If a threshold is currently being exceeded on the
interface, the object will be set. Otherwise,
the object will be set to 1.
This object belongs to xfp/sfp.ro Enumeration .1.3.6.1.4.1.8886.1.18.2.2.1.1.7 |
raisecomOpticalTransceiverParamAlarmLastValueThis object indicates the optical parameter value at the last time
a threshold related to a particular optical parameter was
exceeded on the interface.
If no threshold value is currently being
exceeded, then the value '-1000000' is returned.
This object belongs to xfp/sfp.ro OpticalParameterValue .1.3.6.1.4.1.8886.1.18.2.2.1.1.8 |
raisecomOpticalTransceiverParamAlarmLastChangeThis object specifies the value of sysUpTime at the last time
a threshold related to a particular optical parameter was
exceeded on the interface.
This object belongs to xfp/sfp.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.8886.1.18.2.2.1.1.9 |
raisecomOpticalTransceiverDDM15MinValidIntervalsThis object gives the number of previous 15 minute
intervals for which valid performance monitoring data
has been stored on the interface.
The value of this object will be n (where n is the maximum
number of 15 minute intervals supported at this interface),
unless the measurement was (re-)started within the last
(nx15) minutes, in which case the value will be the
number of previous 15 minute intervals for which the agent
has some data.
This object belongs to xfp/sfp.ro Unsigned32 .1.3.6.1.4.1.8886.1.18.2.2.1.1.10 |
raisecomOpticalTransceiverDDM24HrValidIntervalsThis object gives the number of previous 24 hour intervals
for which valid performance monitoring data has been stored
on the interface. The max value of this object is 7, it
means that the user can look up 7days history information.
This object belongs to xfp/sfp.ro Unsigned32 .1.3.6.1.4.1.8886.1.18.2.2.1.1.11 |
raisecomOpticalTransceiverDDMValidStatusThis object indicates the parameter row is valid or invalid.
The object value is 'valide' when the module is present and
supporting digitaldiagnotic. The object value is 'invalid'
when the module is absent, or when the module is present and
not supporting digitaldiagnotic.
This object belongs to xfp/sfp.ro Enumeration .1.3.6.1.4.1.8886.1.18.2.2.1.1.12 |
raisecomOpticalTransceiverPMGroup OBJECT IDENTIFIER .1.3.6.1.4.1.8886.1.18.2.3 |
raisecomOpticalTransceiverPMCurrentTableThis table contains performance monitoring data for the
various optical parameters, collected over the current 15
minute or the current 24 hour interval. SEQUENCE OF RaisecomOpticalTransceiverPMCurrentEntry .1.3.6.1.4.1.8886.1.18.2.3.1 |
raisecomOpticalTransceiverPMCurrentEntryAn entry in the raisecomOpticalTransceiverPMCurrentTable. It contains
performance monitoring data for a monitored optical
parameter at an interface, collected over the current 15
minute or the current 24 hour interval. RaisecomOpticalTransceiverPMCurrentEntry .1.3.6.1.4.1.8886.1.18.2.3.1.1 |
raisecomOpticalTransceiverPMCurrentPeriodThis object indicates whether the optical parameter values
given in this entry are collected over the current 15 minute or
the current 24 hour interval.
This object belongs to xfp/sfp. OpticalPMPeriod .1.3.6.1.4.1.8886.1.18.2.3.1.1.1 |
raisecomOpticalTransceiverPMCurrentParamTypeThis object specifies the optical parameter that is being
monitored, in this entry.
This object belongs to xfp/sfp. OpticalParameterType .1.3.6.1.4.1.8886.1.18.2.3.1.1.2 |
raisecomOpticalTransceiverPMCurrentMaxParamThis object gives the maximum value measured for the monitored
optical parameter, in the current 15 minute or the current
24 hour interval.
This object belongs to xfp/sfp.ro OpticalParameterValue .1.3.6.1.4.1.8886.1.18.2.3.1.1.3 |
raisecomOpticalTransceiverPMCurrentMinParamThis object gives the minimum value measured for the monitored
optical parameter, in the current 15 minute or the current
24 hour interval.
This object belongs to xfp/sfp.ro OpticalParameterValue .1.3.6.1.4.1.8886.1.18.2.3.1.1.4 |
raisecomOpticalTransceiverPMCurrentMeanParamThis object gives the average value of the monitored
optical parameter, in the current 15 minute or the current
24 hour interval.
This object belongs to xfp/sfp.ro OpticalParameterValue .1.3.6.1.4.1.8886.1.18.2.3.1.1.5 |
raisecomOpticalTransceiverPMIntervalTableThis table stores performance monitoring data for the
various optical parameters, collected over previous
intervals.
This table can have entries for one complete 24 hour
interval and up to 96 complete 15 minute
intervals. A system is required to store at least
4 completed 15 minute intervals. The number of valid
15 minute intervals in this table is indicated by the
raisecomOpticalTransceiverDDM15MinValidIntervals object
and the number of valid 24 hour intervals is indicated by the
raisecomOpticalTransceiverDDM24HrValidIntervals object.
when the optical module is removed from the device, the relative
history records will be cleaned. SEQUENCE OF RaisecomOpticalTransceiverPMIntervalEntry .1.3.6.1.4.1.8886.1.18.2.3.2 |
raisecomOpticalTransceiverPMIntervalEntryAn entry in the raisecomOpticalTransceiverPMIntervalTable. It contains
performance monitoring data for an optical parameter,
collected over a previous interval. RaisecomOpticalTransceiverPMIntervalEntry .1.3.6.1.4.1.8886.1.18.2.3.2.1 |
raisecomOpticalTransceiverPMIntervalPeriodThis object indicates whether the optical parameter values,
given in this entry, are collected over a period of 15 minutes
or 24 hours.
This object belongs to xfp/sfp. OpticalPMPeriod .1.3.6.1.4.1.8886.1.18.2.3.2.1.1 |
raisecomOpticalTransceiverPMIntervalNumberA number between 1 and 96, which identifies the
interval for which the set of optical parameter values is
available. The interval identified by 1 is the most recently
completed 15 minute or 24 hour interval, and the interval
identified by N is the interval immediately preceding the one
identified by N-1.
This object belongs to xfp/sfp. Integer32 .1.3.6.1.4.1.8886.1.18.2.3.2.1.2 |
raisecomOpticalTransceiverPMIntervalParamTypeThis object specifies the optical parameter that is being
monitored, in this entry.
This object belongs to xfp/sfp. OpticalParameterType .1.3.6.1.4.1.8886.1.18.2.3.2.1.3 |
raisecomOpticalTransceiverPMIntervalMaxParamThis object gives the maximum value measured for the optical
parameter, in a particular 15 minute or 24 hour interval.
This object belongs to xfp/sfp.ro OpticalParameterValue .1.3.6.1.4.1.8886.1.18.2.3.2.1.4 |
raisecomOpticalTransceiverPMIntervalMinParamThis object gives the minimum value measured for the optical
parameter, in a particular 15 minute or 24 hour interval.
This object belongs to xfp/sfp.ro OpticalParameterValue .1.3.6.1.4.1.8886.1.18.2.3.2.1.5 |
raisecomOpticalTransceiverPMIntervalMeanParamThis object gives the average value of the measured optical
parameter, in a particular 15 minute or 24 hour interval.
This object belongs to xfp/sfp.ro OpticalParameterValue .1.3.6.1.4.1.8886.1.18.2.3.2.1.6 |
raisecomOpticalTransceiverStatusGroup OBJECT IDENTIFIER .1.3.6.1.4.1.8886.1.18.2.4 |
raisecomOpticalTransceiverCurrentStatusTableThis table stores the hard ware information and the information
set by user of the transceiver.
This object belongs to xfp/sfp. SEQUENCE OF RaisecomOpticalTransceiverCurrentStatusEntry .1.3.6.1.4.1.8886.1.18.2.4.1 |
raisecomOpticalTransceiverCurrentStatusEntryAn entry in the raisecomOpticalTransceiverCurrentStatusTable. It contains
performance monitoring data for an optical parameter,
collected over a previous interval.
This object belongs to xfp/sfp. RaisecomOpticalTransceiverCurrentStatusEntry .1.3.6.1.4.1.8886.1.18.2.4.1.1 |
raisecomOpticalTransceiverHwInfoAbsStatusThis object specifies if the optical module is absent
present,absent.
This object belongs to xfp and sfp.ro Enumeration .1.3.6.1.4.1.8886.1.18.2.4.1.1.1 |
raisecomOpticalTransceiverHwInfoNRStatusThis object specifies if the optical module is ready for operation.
ready,notready.
This object belongs to xfp.ro Enumeration .1.3.6.1.4.1.8886.1.18.2.4.1.1.2 |
raisecomOpticalTransceiverHwInfoRxLosStatusThis object specifies if the optical module operation losses the receiving signal
normal,loss.
This object belongs to xfp.ro Enumeration .1.3.6.1.4.1.8886.1.18.2.4.1.1.3 |
raisecomOpticalTransceiverHwInfoStandbyThis object specifies if the optical module works under standby mode.
normal,standby.
This object belongs to xfp.rw Enumeration .1.3.6.1.4.1.8886.1.18.2.4.1.1.4 |
raisecomOpticalTransceiverHwInfoLaserThis object specifies if the optical module laser is turned on
on,off.
This object belongs to xfp.rw Enumeration .1.3.6.1.4.1.8886.1.18.2.4.1.1.5 |
raisecomOpticalTransceiverWaveLengthErrorThis object specifies error between the actual wavelength
and the wavelength set by the user,measured in pm.
This object belongs to xfp.
The object will be shown in unit of nm, and the precision is 0.001.ro Integer32 .1.3.6.1.4.1.8886.1.18.2.4.1.1.6 |
raisecomOpticalTransceiverUserWaveLengthThis object specifies the wavelength value of the optical module set by user,measured in pm.
This object belongs to xfp.
The object will be shown in unit of nm, and the precision is 0.01.rw Integer32 .1.3.6.1.4.1.8886.1.18.2.4.1.1.7 |
raisecomOpticalTransceiverUserDataRateThis object specifies the data rate of the optical module set by user,measured in Mbps.
This object belongs to xfp.
The object will be shown in unit of Gbps, and the precision is 0.1.rw INTEGER .1.3.6.1.4.1.8886.1.18.2.4.1.1.8 |
raisecomOpticalTransceiverUserLineLoopBackThis object specifies if the sideline loop-back is tuned on ,
user can change the loop back mode through the object.
normal,lineLoopback.
This object belongs to xfp.rw Enumeration .1.3.6.1.4.1.8886.1.18.2.4.1.1.9 |
raisecomOpticalTransceiverUserXFILoopBackThis object specifies if the XFI loop-back is tuned on
user can change the loop back mode through the object.
normal,xfiLoopback.
This object belongs to xfp.rw Enumeration .1.3.6.1.4.1.8886.1.18.2.4.1.1.10 |
raisecomOpticalTransceiverPortNotifyEnableThis object specifies the generation of a port notifications,
enable or disable.
This object belongs to xfp and sfp.rw EnableVar .1.3.6.1.4.1.8886.1.18.2.4.1.1.11 |
raisecomOpticalTransceiverPortDDMEnableThis object specifies the status of digitaldiagnotic on a port,
enable or disable.
This object belongs to xfp and sfp.rw EnableVar .1.3.6.1.4.1.8886.1.18.2.4.1.1.12 |
raisecomOpticalTransceiverPortCheckPwdEnableThis object specifies the status of password checking on a port,
enable or disable.
This object belongs to xfp.rw EnableVar .1.3.6.1.4.1.8886.1.18.2.4.1.1.13 |
raisecomOpticalTransceiverTxFaultCountThis object specifies the number of tx-fault signals.ro Integer32 .1.3.6.1.4.1.8886.1.18.2.4.1.1.14 |
raisecomOpticalTransceiverTxFaultCountClearThis object specifies clear the statistcs of tx-fault signals.rw ClearVar (SWITCH-TC) .1.3.6.1.4.1.8886.1.18.2.4.1.1.15 |
raisecomOpticalTransceiverSpecificationCheckStatusThis object specifies the check status, accord(0)specifies
the optical module accord with industrial. not-accord(2)
specifies the optical module not accord with industrial.ro Enumeration .1.3.6.1.4.1.8886.1.18.2.4.1.1.16 |
raisecomOpticalTransceiverTxFaultStatusThis object specifies the tx-fault status.ro Enumeration .1.3.6.1.4.1.8886.1.18.2.4.1.1.17 |
raisecomOpticalTransceiverNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.8886.1.18.3 |
raisecomOpticalTransceiverAbsentTrapThis notification is sent when the optical module is removed from the device.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.3.1 |
raisecomOpticalTransceiverPresentTrapThis notification is sent when the optical module is plugged into the device.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.3.2 |
raisecomOpticalTransceiverNRAlarmTrapThis notification is sent when the transmitted or received data of optical module is invalid.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.3.3 |
raisecomOpticalTransceiverNRNormalTrapThis notification is sent when the transmitted or received data of optical module is valid.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.3.4 |
raisecomOpticalTransceiverRxLosAlarmTrapThis notification is sent when the optical module receiving signal is lost.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.3.5 |
raisecomOpticalTransceiverRxLosNormaTrapThis notification is sent when the optical module receiving signal is back to normal.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.3.6 |
raisecomOpticalTransceiverCheckPwdFailureTrapThis notification is sent when the optical module password checking is failed.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.3.7 |
raisecomOpticalTransceiverCheckPwdSucceedTrapThis notification is sent when the optical module password cheching is successful.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.3.8 |
raisecomOpticalTransceiverParamAlarmTrapThis notification is sent when the optical module parameter value increase to above
the high alarm threshold or dicrease to under the low alarm threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.3.9 |
raisecomOpticalTransceiverParamAlarmNormalTrapThis notification is sent when the optical module parameter value dicrease to
under the high alarm threshold or increase to above the low alarm threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.3.10 |
raisecomOpticalTransceiverParamWarningTrapThis notification is sent when the optical module parameter value increase to above
the high warning threshold or dicrease to under the low warning threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.3.11 |
raisecomOpticalTransceiverParamWarningNormalTrapThis notification is sent when the optical module parameter value dicrease to
under the high warning threshold or increase to above the low warning threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.3.12 |
raisecomOpticalTransceiverLaserBackLightAlarmTrapThis notification is sent when the optical module password cheching is successful.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.3.13 |
raisecomOpticalTransceiverLaserBackLightAlarmNormalTrapThis notification is sent when the optical module password cheching is successful.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.3.14 |
raisecomOpticalTransceiverLaserLifeAlarmTrapThis notification is sent when the optical module password cheching is successful.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.3.15 |
raisecomOpticalTransceiverLaserLifeAlarmNormalTrapThis notification is sent when the optical module password cheching is successful.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.3.16 |
raisecomOpticalTransceiverParamLowAlarmTrapThis notification is sent when the optical module parameter value increase to above
the high alarm threshold or dicrease to under the low alarm threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.3.17 |
raisecomOpticalTransceiverParamLowAlarmNormalTrapThis notification is sent when the optical module parameter value increase to above
the high alarm threshold or dicrease to under the low alarm threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.3.18 |
raisecomOpticalTransceiverParamLowWarningTrapThis notification is sent when the optical module parameter value increase to above
the high alarm threshold or dicrease to under the low alarm threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.3.19 |
raisecomOpticalTransceiverParamLowWarningNormalTrapThis notification is sent when the optical module parameter value increase to above
the high alarm threshold or dicrease to under the low alarm threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.3.20 |
raisecomOpticalTransceiverParamNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.8886.1.18.4 |
raisecomOpticalTransceiverTemperatureAlarmTrapThis notification is sent when the optical module Temperature value increase to above
the high alarm threshold or dicrease to under the low alarm threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.1 |
raisecomOpticalTransceiverTemperatureAlarmNormalTrapThis notification is sent when the optical module Temperature value dicrease to
under the high alarm threshold or increase to above the low alarm threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.2 |
raisecomOpticalTransceiverTemperatureWarningTrapThis notification is sent when the optical module Temperature value increase to above
the high warning threshold or dicrease to under the low warning threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.3 |
raisecomOpticalTransceiverTemperatureWarningNormalTrapThis notification is sent when the optical module Temperature value dicrease to
under the high warning threshold or increase to above the low warning threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.4 |
raisecomOpticalTransceiverTxbiasCurrentAlarmTrapThis notification is sent when the optical module Tx bias Current value increase to above
the high alarm threshold or dicrease to under the low alarm threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.5 |
raisecomOpticalTransceiverTxbiasCurrentAlarmNormalTrapThis notification is sent when the optical module Tx bias Current value dicrease to
under the high alarm threshold or increase to above the low alarm threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.6 |
raisecomOpticalTransceiverTxbiasCurrentWarningTrapThis notification is sent when the optical module Tx bias Current value increase to above
the high warning threshold or dicrease to under the low warning threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.7 |
raisecomOpticalTransceiverTxbiasCurrentWarningNormalTrapThis notification is sent when the optical module Tx bias Current value dicrease to
under the high warning threshold or increase to above the low warning threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.8 |
raisecomOpticalTransceiverTxPowerAlarmTrapThis notification is sent when the optical module Tx Power value increase to above
the high alarm threshold or dicrease to under the low alarm threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.9 |
raisecomOpticalTransceiverTxPowerAlarmNormalTrapThis notification is sent when the optical module Tx Power value dicrease to
under the high alarm threshold or increase to above the low alarm threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.10 |
raisecomOpticalTransceiverTxPowerWarningTrapThis notification is sent when the optical module Tx Power value increase to above
the high warning threshold or dicrease to under the low warning threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.11 |
raisecomOpticalTransceiverTxPowerWarningNormalTrapThis notification is sent when the optical module Tx Power value dicrease to
under the high warning threshold or increase to above the low warning threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.12 |
raisecomOpticalTransceiverRxPowerAlarmTrapThis notification is sent when the optical module Rx Power value increase to above
the high alarm threshold or dicrease to under the low alarm threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.13 |
raisecomOpticalTransceiverRxPowerWarningTrapThis notification is sent when the optical module Rx Power value increase to above
the high warning threshold or dicrease to under the low warning threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.14 |
raisecomOpticalTransceiverRxPowerWarningNormalTrapThis notification is sent when the optical module Rx Power value dicrease to
under the high warning threshold or increase to above the low warning threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.15 |
raisecomOpticalTransceiverRxPowerAlarmNormalTrapThis notification is sent when the optical module Rx Power value dicrease to
under the high alarm threshold or increase to above the low alarm threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.16 |
raisecomOpticalTransceiverLaserTemperatureAlarmTrapThis notification is sent when the optical module Laser Temperature value increase to above
the high alarm threshold or dicrease to under the low alarm threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.17 |
raisecomOpticalTransceiverLaserTemperatureWarningTrapThis notification is sent when the optical module Laser Temperature value increase to above
the high warning threshold or dicrease to under the low warning threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.18 |
raisecomOpticalTransceiverLaserTemperatureWarningNormalTrapThis notification is sent when the optical module Laser Temperature value dicrease to
under the high warning threshold or increase to above the low warning threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.19 |
raisecomOpticalTransceiverLaserTemperatureAlarmNormalTrapThis notification is sent when the optical module Laser Temperature value dicrease to
under the high alarm threshold or increase to above the low alarm threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.20 |
raisecomOpticalTransceiverP5V0supplyVoltageAlarmTrapThis notification is sent when the optical module +5.0V supply Voltage value increase to above
the high alarm threshold or dicrease to under the low alarm threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.21 |
raisecomOpticalTransceiverP5V0supplyVoltageWarningTrapThis notification is sent when the optical module +5.0V supply Voltage value increase to above
the high warning threshold or dicrease to under the low warning threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.22 |
raisecomOpticalTransceiverP5V0supplyVoltageWarningNormalTrapThis notification is sent when the optical module +5.0V supply Voltage value dicrease to
under the high warning threshold or increase to above the low warning threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.23 |
raisecomOpticalTransceiverP5V0supplyVoltageAlarmNormalTrapThis notification is sent when the optical module +5.0V supply Voltage value dicrease to
under the high alarm threshold or increase to above the low alarm threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.24 |
raisecomOpticalTransceiverP3V3supplyVoltageAlarmTrapThis notification is sent when the optical module +3.3V supply Voltage value increase to above
the high alarm threshold or dicrease to under the low alarm threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.25 |
raisecomOpticalTransceiverP3V3supplyVoltageWarningTrapThis notification is sent when the optical module +3.3V supply Voltage value increase to above
the high warning threshold or dicrease to under the low warning threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.26 |
raisecomOpticalTransceiverP3V3supplyVoltageWarningNormalTrapThis notification is sent when the optical module +3.3V supply Voltage value dicrease to
under the high warning threshold or increase to above the low warning threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.27 |
raisecomOpticalTransceiverP3V3supplyVoltageAlarmNormalTrapThis notification is sent when the optical module +3.3V supply Voltage value dicrease to
under the high alarm threshold or increase to above the low alarm threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.28 |
raisecomOpticalTransceiverP1V8supplyVoltageAlarmTrapThis notification is sent when the optical module +1.8v supply Voltage value increase to above
the high alarm threshold or dicrease to under the low alarm threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.29 |
raisecomOpticalTransceiverP1V8supplyVoltageWarningTrapThis notification is sent when the optical module +1.8v supply Voltage value increase to above
the high warning threshold or dicrease to under the low warning threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.30 |
raisecomOpticalTransceiverP1V8supplyVoltageWarningNormalTrapThis notification is sent when the optical module +1.8v supply Voltage value dicrease to
under the high warning threshold or increase to above the low warning threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.31 |
raisecomOpticalTransceiverP1V8supplyVoltageAlarmNormalTrapThis notification is sent when the optical module +1.8v supply Voltage value dicrease to
under the high alarm threshold or increase to above the low alarm threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.32 |
raisecomOpticalTransceiverN5V2supplyVoltageAlarmTrapThis notification is sent when the optical module -5.2v supply Voltage value increase to above
the high alarm threshold or dicrease to under the low alarm threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.33 |
raisecomOpticalTransceiverN5V2supplyVoltageWarningTrapThis notification is sent when the optical module -5.2v supply Voltage value increase to above
the high warning threshold or dicrease to under the low warning threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.34 |
raisecomOpticalTransceiverN5V2supplyVoltageWarningNormalTrapThis notification is sent when the optical module -5.2v supply Voltage value dicrease to
under the high warning threshold or increase to above the low warning threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.35 |
raisecomOpticalTransceiverN5V2supplyVoltageAlarmNormalTrapThis notification is sent when the optical module -5.2v supply Voltage value dicrease to
under the high alarm threshold or increase to above the low alarm threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.36 |
raisecomOpticalTransceiverApdBiasVoltageAlarmTrapThis notification is sent when the optical module APD Bias Voltage value increase to above
the high alarm threshold or dicrease to under the low alarm threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.37 |
raisecomOpticalTransceiverApdBiasVoltageWarningTrapThis notification is sent when the optical module APD Bias Voltage value increase to above
the high warning threshold or dicrease to under the low warning threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.38 |
raisecomOpticalTransceiverApdBiasVoltageWarningNormalTrapThis notification is sent when the optical module APD Bias Voltage value dicrease to
under the high warning threshold or increase to above the low warning threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.39 |
raisecomOpticalTransceiverApdBiasVoltageAlarmNormalTrapThis notification is sent when the optical module APD Bias Voltage value dicrease to
under the high alarm threshold or increase to above the low alarm threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.40 |
raisecomOpticalTransceiverP5V0supplyCurrentAlarmTrapThis notification is sent when the optical module +5.0V supply Current value increase to above
the high alarm threshold or dicrease to under the low alarm threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.41 |
raisecomOpticalTransceiverP5V0supplyCurrentWarningTrapThis notification is sent when the optical module +5.0V supply Current value increase to above
the high warning threshold or dicrease to under the low warning threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.42 |
raisecomOpticalTransceiverP5V0supplyCurrentWarningNormalTrapThis notification is sent when the optical module +5.0V supply Current value dicrease to
under the high warning threshold or increase to above the low warning threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.43 |
raisecomOpticalTransceiverP5V0supplyCurrentAlarmNormalTrapThis notification is sent when the optical module +5.0V supply Current value dicrease to
under the high alarm threshold or increase to above the low alarm threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.44 |
raisecomOpticalTransceiverP3V3supplyCurrentAlarmTrapThis notification is sent when the optical module +3.3V supply Current value increase to above
the high alarm threshold or dicrease to under the low alarm threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.45 |
raisecomOpticalTransceiverP3V3supplyCurrentWarningTrapThis notification is sent when the optical module +3.3V supply Current value increase to above
the high warning threshold or dicrease to under the low warning threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.46 |
raisecomOpticalTransceiverP3V3supplyCurrentWarningNormalTrapThis notification is sent when the optical module +3.3V supply Current value dicrease to
under the high warning threshold or increase to above the low warning threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.47 |
raisecomOpticalTransceiverP3V3supplyCurrentAlarmNormalTrapThis notification is sent when the optical module +3.3V supply Current value dicrease to
under the high alarm threshold or increase to above the low alarm threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.48 |
raisecomOpticalTransceiverP1V8supplyCurrentAlarmTrapThis notification is sent when the optical module +1.8V supply Current value increase to above
the high alarm threshold or dicrease to under the low alarm threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.49 |
raisecomOpticalTransceiverP1V8supplyCurrentWarningTrapThis notification is sent when the optical module +1.8V supply Current value increase to above
the high warning threshold or dicrease to under the low warning threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.50 |
raisecomOpticalTransceiverP1V8supplyCurrentWarningNormalTrapThis notification is sent when the optical module +1.8V supply Current value dicrease to
under the high warning threshold or increase to above the low warning threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.51 |
raisecomOpticalTransceiverP1V8supplyCurrentAlarmNormalTrapThis notification is sent when the optical module +1.8V supply Current value dicrease to
under the high alarm threshold or increase to above the low alarm threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.52 |
raisecomOpticalTransceiverN5V2supplyCurrentAlarmTrapThis notification is sent when the optical module -5.2V supply Current value increase to above
the high alarm threshold or dicrease to under the low alarm threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.53 |
raisecomOpticalTransceiverN5V2supplyCurrentWarningTrapThis notification is sent when the optical module -5.2V supply Current value increase to above
the high warning threshold or dicrease to under the low warning threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.54 |
raisecomOpticalTransceiverN5V2supplyCurrentWarningNormalTrapThis notification is sent when the optical module -5.2V supply Current value dicrease to
under the high warning threshold or increase to above the low warning threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.55 |
raisecomOpticalTransceiverN5V2supplyCurrentAlarmNormalTrapThis notification is sent when the optical module -5.2V supply Current value dicrease to
under the high alarm threshold or increase to above the low alarm threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.56 |
raisecomOpticalTransceiverTecCurrentAlarmTrapThis notification is sent when the optical module TecCurrent value increase to above
the high alarm threshold or dicrease to under the low alarm threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.57 |
raisecomOpticalTransceiverTecCurrentWarningTrapThis notification is sent when the optical module TecCurrent value increase to above
the high warning threshold or dicrease to under the low warning threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.58 |
raisecomOpticalTransceiverTecCurrentWarningNormalTrapThis notification is sent when the optical module TecCurrent value dicrease to
under the high warning threshold or increase to above the low warning threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.59 |
raisecomOpticalTransceiverTecCurrentAlarmNormalTrapThis notification is sent when the optical module TecCurrent value dicrease to
under the high alarm threshold or increase to above the low alarm threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.60 |
raisecomOpticalTransceiverLaserWavelengthAlarmTrapThis notification is sent when the optical module laserWavelength value increase to above
the high alarm threshold or dicrease to under the low alarm threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.61 |
raisecomOpticalTransceiverLaserWavelengthWarningTrapThis notification is sent when the optical module laserWavelength value increase to above
the high warning threshold or dicrease to under the low warning threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.62 |
raisecomOpticalTransceiverLaserWavelengthWarningNormalTrapThis notification is sent when the optical module laserWavelength value dicrease to
under the high warning threshold or increase to above the low warning threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.63 |
raisecomOpticalTransceiverLaserWavelengthAlarmNormalTrapThis notification is sent when the optical module laserWavelength value dicrease to
under the high alarm threshold or increase to above the low alarm threshold.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.64 |
raisecomOpticalTransceiverTxFaultTrapThis notification is sent when the SFP optical module occures Tx-fault signal.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.65 |
raisecomOpticalTransceiverTxNormalTrapThis notification is sent when the SFP optical module cancels the Tx-fault signal.
This notification may be suppressed under the following
conditions:
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.18.4.66 |