RAISECOM-OPTICAL-MONITOR-MIB
AI MIB Summary
The RAISECOM-OPTICAL-MONITOR-MIB enables SNMP-based monitoring of optical interface parameters, including received/transmitted optical power, laser bias current, and temperature, on Raisecom network elements.
This MIB module defines objects to monitor optical characteristics on the optical interfaces in a network element.
Main OID:
raisecomOpticalMonitorMIB.1.3.6.1.4.1.8886.1.9
56
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
56 total| Object Name |
|---|
raisecomOpticalMonitorMIBThis MIB module defines objects to monitor optical characteristics on the optical interfaces in a network element. MODULE-IDENTITY .1.3.6.1.4.1.8886.1.9 |
raisecomOpticalMonitorMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.8886.1.9.1 |
raisecomOpticalMonGroup OBJECT IDENTIFIER .1.3.6.1.4.1.8886.1.9.1.1 |
raisecomOpticalMonTableThis table provides objects to monitor optical parameters in a network element. SEQUENCE OF RaisecomOpticalMonEntry .1.3.6.1.4.1.8886.1.9.1.1.1 |
raisecomOpticalMonEntryAn entry in the raisecomOpticalMonTable provides objects to monitor an optical parameter at an optical interface. RaisecomOpticalMonEntry .1.3.6.1.4.1.8886.1.9.1.1.1.1 |
raisecomOpticalMonParameterTypeThis object specifies the optical parameter that is being monitored in this entry. OpticalParameterType .1.3.6.1.4.1.8886.1.9.1.1.1.1.1 |
raisecomOpticalParameterValueThis object gives the value measured for the particular optical parameter specified by the raisecomOpticalMonParameterType object.ro OpticalParameterValue .1.3.6.1.4.1.8886.1.9.1.1.1.1.2 |
raisecomOpticalParamHighAlarmThreshThis object gives the high alarm threshold on the optical parameter being monitored. An alarm condition will be raised if the value given by raisecomOpticalParameterValue goes from below the value of this object to above the value of this object, or if the initial value of raisecomOpticalParameterValue exceeds the value of this object. This alarm will be indicated in the raisecomOpticalParamAlarmStatus object.ro OpticalParameterValue .1.3.6.1.4.1.8886.1.9.1.1.1.1.3 |
raisecomOpticalParamHighWarningThreshThis object is used to set a high warning threshold on the optical parameter being monitored. A threshold crossing condition will be indicated if the value given by raisecomOpticalParameterValue goes from below the value of this object to above the value of this object, or if the initial value of raisecomOpticalParameterValue exceeds the value of this object. This alarm will be indicated in the raisecomOpticalParamAlarmStatus object.ro OpticalParameterValue .1.3.6.1.4.1.8886.1.9.1.1.1.1.4 |
raisecomOpticalParamLowAlarmThreshThis object is used to set a low alarm threshold on the optical parameter being monitored. An alarm condition will be raised if the value given by raisecomOpticalParameterValue goes from above the value of this object to below the value of this object, or if the initial value of raisecomOpticalParameterValue is lower than the value of this object. This alarm will be indicated in the raisecomOpticalParamAlarmStatus object ..ro OpticalParameterValue .1.3.6.1.4.1.8886.1.9.1.1.1.1.5 |
raisecomOpticalParamLowWarningThreshThis object is used to set a low warning threshold on the optical parameter being monitored. A threshold crossing condition will be indicated if the value given by raisecomOpticalParameterValue goes from above the value of this object to below the value of this object, or if the initial value of raisecomOpticalParameterValue object is lower than the value of this object. For network elements in the status indications, this threshold violation will be indicated in the raisecomOpticalParamAlarmStatus object .ro OpticalParameterValue .1.3.6.1.4.1.8886.1.9.1.1.1.1.6 |
raisecomOpticalParamAlarmStatusThis object is used to indicate the current status of the thresholds for the monitored optical parameter on the interface. If a threshold is currently being exceeded on the interface, the object will be set. Otherwise, the object will be set to 0.ro Enumeration .1.3.6.1.4.1.8886.1.9.1.1.1.1.7 |
raisecomOpticalParamAlarmLastValueThis object indicates the optical parameter value at the last time a threshold related to a particular optical parameter was exceeded on the interface. If no threshold value is currently being exceeded, then the value '-1000000' is returned.ro OpticalParameterValue .1.3.6.1.4.1.8886.1.9.1.1.1.1.8 |
raisecomOpticalParamAlarmLastChangeThis object specifies the value of sysUpTime at the last time a threshold related to a particular optical parameter was exceeded on the interface.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.8886.1.9.1.1.1.1.9 |
raisecomOpticalMon15MinValidIntervalsThis object gives the number of previous 15 minute intervals for which valid performance monitoring data has been stored on the interface. The value of this object will be n (where n is the maximum number of 15 minute intervals supported at this interface), unless the measurement was (re-)started within the last (nx15) minutes, in which case the value will be the number of previous 15 minute intervals for which the agent has some data.ro Unsigned32 .1.3.6.1.4.1.8886.1.9.1.1.1.1.10 |
raisecomOpticalMon24HrValidIntervalsThis object gives the number of previous 24 hour intervals for which valid performance monitoring data has been stored on the interface. The value of this object will be 0 if the measurement was (re-)started within the last 24 hours, or 1 otherwise.ro Unsigned32 .1.3.6.1.4.1.8886.1.9.1.1.1.1.11 |
raisecomOpticalMonValidStatusThis object indicates the parameter row is valid or not.ro Enumeration .1.3.6.1.4.1.8886.1.9.1.1.1.1.12 |
raisecomOpticalNotifyEnableThis object specifies the generation of raisecomOpticalMonParameterStatus notifications.rw EnableVar (SWITCH-TC) .1.3.6.1.4.1.8886.1.9.1.1.2 |
raisecomOpticalDigitalDiagnoticEnableEnable or disable digitaldiagnotic on the switch.rw EnableVar (SWITCH-TC) .1.3.6.1.4.1.8886.1.9.1.1.3 |
raisecomOpticalPMGroup OBJECT IDENTIFIER .1.3.6.1.4.1.8886.1.9.1.2 |
raisecomOpticalPMCurrentTableThis table contains performance monitoring data for the various optical parameters, collected over the current 15 minute or the current 24 hour interval. SEQUENCE OF RaisecomOpticalPMCurrentEntry .1.3.6.1.4.1.8886.1.9.1.2.1 |
raisecomOpticalPMCurrentEntryAn entry in the raisecomOpticalPMCurrentTable. It contains performance monitoring data for a monitored optical parameter at an interface, collected over the current 15 minute or the current 24 hour interval. RaisecomOpticalPMCurrentEntry .1.3.6.1.4.1.8886.1.9.1.2.1.1 |
raisecomOpticalPMCurrentPeriodThis object indicates whether the optical parameter values given in this entry are collected over the current 15 minute or the current 24 hour interval. OpticalPMPeriod .1.3.6.1.4.1.8886.1.9.1.2.1.1.1 |
raisecomOpticalPMCurrentParamTypeThis object specifies the optical parameter that is being monitored, in this entry. OpticalParameterType .1.3.6.1.4.1.8886.1.9.1.2.1.1.2 |
raisecomOpticalPMCurrentMaxParamThis object gives the maximum value measured for the monitored optical parameter, in the current 15 minute or the current 24 hour interval.ro OpticalParameterValue .1.3.6.1.4.1.8886.1.9.1.2.1.1.3 |
raisecomOpticalPMCurrentMinParamThis object gives the minimum value measured for the monitored optical parameter, in the current 15 minute or the current 24 hour interval.ro OpticalParameterValue .1.3.6.1.4.1.8886.1.9.1.2.1.1.4 |
raisecomOpticalPMCurrentMeanParamThis object gives the average value of the monitored optical parameter, in the current 15 minute or the current 24 hour interval.ro OpticalParameterValue .1.3.6.1.4.1.8886.1.9.1.2.1.1.5 |
raisecomOpticalPMIntervalTableThis table stores performance monitoring data for the various optical parameters, collected over previous intervals. This table can have entries for one complete 24 hour interval and up to 96 complete 15 minute intervals. A system is required to store at least 4 completed 15 minute intervals. The number of valid 15 minute intervals in this table is indicated by the cOpticalMon15MinValidIntervals object and the number of valid 24 hour intervals is indicated by the cOpticalMon24HrValidIntervals object. SEQUENCE OF RaisecomOpticalPMIntervalEntry .1.3.6.1.4.1.8886.1.9.1.2.2 |
raisecomOpticalPMIntervalEntryAn entry in the raisecomOpticalPMIntervalTable. It contains performance monitoring data for an optical parameter, collected over a previous interval. RaisecomOpticalPMIntervalEntry .1.3.6.1.4.1.8886.1.9.1.2.2.1 |
raisecomOpticalPMIntervalPeriodThis object indicates whether the optical parameter values, given in this entry, are collected over a period of 15 minutes or 24 hours. OpticalPMPeriod .1.3.6.1.4.1.8886.1.9.1.2.2.1.1 |
raisecomOpticalPMIntervalNumberA number between 1 and 96, which identifies the interval for which the set of optical parameter values is available. The interval identified by 1 is the most recently completed 15 minute or 24 hour interval, and the interval identified by N is the interval immediately preceding the one identified by N-1. Integer32 .1.3.6.1.4.1.8886.1.9.1.2.2.1.2 |
raisecomOpticalPMIntervalParamTypeThis object specifies the optical parameter that is being monitored, in this entry. OpticalParameterType .1.3.6.1.4.1.8886.1.9.1.2.2.1.3 |
raisecomOpticalPMIntervalMaxParamThis object gives the maximum value measured for the optical parameter, in a particular 15 minute or 24 hour interval.ro OpticalParameterValue .1.3.6.1.4.1.8886.1.9.1.2.2.1.4 |
raisecomOpticalPMIntervalMinParamThis object gives the minimum value measured for the optical parameter, in a particular 15 minute or 24 hour interval.ro OpticalParameterValue .1.3.6.1.4.1.8886.1.9.1.2.2.1.5 |
raisecomOpticalPMIntervalMeanParamThis object gives the average value of the measured optical parameter, in a particular 15 minute or 24 hour interval.ro OpticalParameterValue .1.3.6.1.4.1.8886.1.9.1.2.2.1.6 |
raisecomTranceiverInfoTableTrancetver information Table. SEQUENCE OF RaisecomTranceiverInfoEntry .1.3.6.1.4.1.8886.1.9.1.4 |
raisecomTranceiverInfoEntryAn entry in the raisecomSfpAccessA0Table. RaisecomTranceiverInfoEntry .1.3.6.1.4.1.8886.1.9.1.4.1 |
raisecomTranceiverTypeType of the interface, such as 1000_BASE_SX_SFPro OCTET STRING .1.3.6.1.4.1.8886.1.9.1.4.1.1 |
raisecomTranceiverConnectorTypeConnectorType of the interface, such as SC/LCro OCTET STRING .1.3.6.1.4.1.8886.1.9.1.4.1.2 |
raisecomTranceiverWavelengthWavelength of the interface, measured in nm.ro Integer32 .1.3.6.1.4.1.8886.1.9.1.4.1.3 |
raisecomTranceiverVendorNameVendor name of the interface.ro OCTET STRING .1.3.6.1.4.1.8886.1.9.1.4.1.4 |
raisecomTranceiverVendorPNVendor part number of the interface.ro OCTET STRING .1.3.6.1.4.1.8886.1.9.1.4.1.5 |
raisecomTranceiverVendorSNVendor serial number of the interface.ro OCTET STRING .1.3.6.1.4.1.8886.1.9.1.4.1.6 |
raisecomTransceiverFiberTypeTypes of the fiber, single-mode, multi-mode, none.ro Enumeration .1.3.6.1.4.1.8886.1.9.1.4.1.7 |
raisecomTransceiverTransferDistanceThe max distance which the interface could transmit, measured in meter.ro Integer32 .1.3.6.1.4.1.8886.1.9.1.4.1.8 |
raisecomOpticalMonitorMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.8886.1.9.2 |
raisecomOpticalMonParameterStatusThis notification is sent when any threshold related to an optical parameter is exceeded on an interface. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable object. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.9.2.1 |
raisecomOpticalMonitorMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.8886.1.9.3 |
raisecomOpticalMonitorMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.8886.1.9.3.1 |
raisecomOpticalMonitorMIBComplianceThe compliance statement for network elements that monitor optical characteristics and thresholds on the optical interfaces in a network element. Unknown .1.3.6.1.4.1.8886.1.9.3.1.1 |
raisecomOpticalMonitorMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.8886.1.9.3.2 |
raisecomOpticalMIBMonGroupA mandatory object that provides monitoring of optical characteristics. Unknown .1.3.6.1.4.1.8886.1.9.3.2.1 |
raisecomOpticalMIBThresholdGroupA collection of objects that support thresholds on optical parameters and provide status information when the thresholds are exceeded . Unknown .1.3.6.1.4.1.8886.1.9.3.2.2 |
raisecomOpticalMIBPMGroupA collection of objects that provide optical performance monitoring data for 15 minute and 24 hour intervals. Unknown .1.3.6.1.4.1.8886.1.9.3.2.3 |
raisecomOpticalMIBNotifyEnableGroupAn object to control the generation of notifications. Unknown .1.3.6.1.4.1.8886.1.9.3.2.4 |
raisecomOpticalMIBNotifGroupA notification generated when a threshold on an optical parameter is exceeded or cleared. Unknown .1.3.6.1.4.1.8886.1.9.3.2.5 |