RAISECOM-FANMONITOR-MIB
The RAISECOM-FANMONITOR-MIB enables SNMP-based monitoring and configuration of cooling fan status, speed, and failure states on Raisecom network hardware. It provides critical telemetry for detecting fan degradation or complete failure to prevent thermal shutdowns in enterprise switching and routing platforms.
Imported Objects
Objects
26 total| Object Name |
|---|
raisecomFanMonitorConfiguration of fanMonitor object. MODULE-IDENTITY .1.3.6.1.4.1.8886.1.1.5 |
raisecomFanMonitorNotification OBJECT IDENTIFIER .1.3.6.1.4.1.8886.1.1.5.1 |
raisecomFanSpeedNormalThe trap notification occur when fan state translating from abnormal to normal. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.1.5.1.1 |
raisecomFanSpeedAbnormalThe trap notification occur when fan state translatingfrom normal to abnormal. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.1.5.1.2 |
raisecomFanCardUpThe trap notification occur when fan card state translating from down to up. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.1.5.1.3 |
raisecomFanCardDownThe trap notification occur when fan card state translating from up to down. NOTIFICATION-TYPE .1.3.6.1.4.1.8886.1.1.5.1.4 |
raisecomFanMonitorMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.8886.1.1.5.2 |
raisecomFanMonitorGlobalGroup OBJECT IDENTIFIER .1.3.6.1.4.1.8886.1.1.5.2.1 |
raisecomFanMonitorModeAn integer value that specify the current monitor mode.
ENFORCE(1) means that the fan speed need to set manully;
AUTO(2) means that the fan speed will ajusted autoly according
to the temperaturerw Enumeration .1.3.6.1.4.1.8886.1.1.5.2.1.1 |
raisecomFanMonitorSpdLevelSpecify the speed level of fan in enforce mode.rw Unsigned32 .1.3.6.1.4.1.8886.1.1.5.2.1.2 |
raisecomFanMonitorNumberSpecify the number of fan being monitorred.ro Unsigned32 .1.3.6.1.4.1.8886.1.1.5.2.1.3 |
raisecomFanMonitorLevlNumberSpecify the total number of fan speed levels.ro Unsigned32 .1.3.6.1.4.1.8886.1.1.5.2.1.4 |
raisecomFanCardStateSpecify the current state of fan cards.
all_down(1) means that all fan cards are down;
all_up(2) means that all fan cards are up;
card1_up(3) means that fan card 1 is up, the others are down;
card2_up(4) means that fan card 2 is up, the others are down.ro Enumeration .1.3.6.1.4.1.8886.1.1.5.2.1.5 |
raisecomFanCardSerialNumberspecify the identical serial number of current fan card,this
string number will be set when device leaving factoryro OCTET STRING .1.3.6.1.4.1.8886.1.1.5.2.1.6 |
raisecomFanMonitorTrapSendEnableSpecifies the status of sending traprw Enumeration .1.3.6.1.4.1.8886.1.1.5.2.1.7 |
raisecomFanMonitorStateTableFan monitor state table. SEQUENCE OF RaisecomFanMonitorStateEntry .1.3.6.1.4.1.8886.1.1.5.2.2 |
raisecomFanMonitorStateEntryFan monitor state entry. RaisecomFanMonitorStateEntry .1.3.6.1.4.1.8886.1.1.5.2.2.1 |
raisecomFanIndexSpecify the sequence number of fan. Unsigned32 .1.3.6.1.4.1.8886.1.1.5.2.2.1.1 |
raisecomFanSpeedValueSpecify the actural speed of the current fan.ro Unsigned32 .1.3.6.1.4.1.8886.1.1.5.2.2.1.2 |
raisecomFanWorkStateSpecify the current state of fan
normal(1) means the current fan operate normally;
abnormal(2) means the current fan operate abnormallyro Enumeration .1.3.6.1.4.1.8886.1.1.5.2.2.1.3 |
raisecomFanSpeedCurrentLevelSpecify the temperature scale border that match the speed levle,
based on this scale border,the current fan speed will ajusted autoly
according to the current temperaturero Unsigned32 .1.3.6.1.4.1.8886.1.1.5.2.2.1.4 |
raisecomFanSpeedLevelTablefan speed level information table. SEQUENCE OF RaisecomFanSpeedLevelEntry .1.3.6.1.4.1.8886.1.1.5.2.3 |
raisecomFanSpeedLevelEntryfan speed level information entry. RaisecomFanSpeedLevelEntry .1.3.6.1.4.1.8886.1.1.5.2.3.1 |
raisecomFanSpeedLevelIndexSpecify the fan speed level index. Unsigned32 .1.3.6.1.4.1.8886.1.1.5.2.3.1.1 |
raisecomFanSpeedDueValueSpecify the speed value that match the fan levle index.
this value can ben get from a new or normal fan ,not an used
fan ,because the used fan may be agedro Unsigned32 .1.3.6.1.4.1.8886.1.1.5.2.3.1.2 |
raisecomFanSpeedTemperatureScaleSpecify the temperature scale border that match the speed levle,
based on this scale border,the current fan speed will ajusted autoly
according to the current temperaturerw Unsigned32 .1.3.6.1.4.1.8886.1.1.5.2.3.1.3 |
More MIBs from Raisecom
Browse all RaisecomMIBs →The RAISECOM-OPTICAL-TRANSCEIVER-MIB enables SNMP-based monitoring of physical layer optical parameters, including received/transmitted optical power, laser bias current, temperature, and supply voltage, on RAISECOM network element interfaces.
The RAISECOM-SYSTEM-MIB provides standard SNMP access to monitor global hardware and software state metrics, including system uptime, CPU utilization, memory usage, and environmental sensors, across all Raisecom network platforms.
Standard SNMP MIB module defining data structures for RAISECOM-BASE-MIB.
The RAISECOM-PON-DEVICE-MIB defines managed objects for monitoring and configuring physical and logical attributes of RAISECOM Passive Optical Network (PON) access devices, including Optical Line Terminal (OLT) and Optical Network Unit (ONU) hardware status, port states, and system resources.
The RAISECOM-OPTICAL-MONITOR-MIB enables SNMP-based monitoring of optical interface parameters, including received/transmitted optical power, laser bias current, and temperature, on Raisecom network elements.
Standard SNMP MIB module defining data structures for RAISECOM-PONSERIES-BASE-MIB.