QOS-DIFFSERV-PRIVATE-MIB
AI MIB Summary
The QOS-DIFFSERV-PRIVATE-MIB enables vendor-specific monitoring and configuration of Differentiated Services (DiffServ) traffic engineering parameters, including per-class queue depths, drop probabilities, and policing rates on network infrastructure. This module provides granular visibility into private QoS policy enforcement and buffer management states that are not covered by standard IETF DiffServ MIBs.
The Private MIB for DiffServ
Main OID:
qosDiffServPrivate.1.3.6.1.4.1.890.1.5.13.5.10.7
200
Objects
Active
Status
10
Dependencies
Imported Objects
Objects
200 total| Object Name |
|---|
qosDiffServPrivateThe Private MIB for DiffServ MODULE-IDENTITY .1.3.6.1.4.1.890.1.5.13.5.10.7 |
agentDiffServGenStatusGroup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.13.5.10.7.1 |
agentDiffServGenStatusAdminModeDiffServ Admin Moderw Enumeration .1.3.6.1.4.1.890.1.5.13.5.10.7.1.1 |
agentDiffServGenStatusClassTableSizeCurrent size of the Class Tablero Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.1.2 |
agentDiffServGenStatusClassTableMaxMax size of the Class Tablero Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.1.3 |
agentDiffServGenStatusClassRuleTableSizeCurrent size of Class Rule Tablero Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.1.4 |
agentDiffServGenStatusClassRuleTableMaxMax size of the Class Rule Table.ro Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.1.5 |
agentDiffServGenStatusPolicyTableSizeCurrent Size of the Policy Table.ro Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.1.6 |
agentDiffServGenStatusPolicyTableMaxMax size of the Policy Tablero Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.1.7 |
agentDiffServGenStatusPolicyInstTableSizeCurrent size of the Policy-Class Instance Tablero Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.1.8 |
agentDiffServGenStatusPolicyInstTableMaxMax size of the Policy-Class Instance Tablero Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.1.9 |
agentDiffServGenStatusPolicyAttrTableSizeCurrent size of the Policy Attribute Tablero Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.1.10 |
agentDiffServGenStatusPolicyAttrTableMaxMax size of the Policy Attribute Tablero Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.1.11 |
agentDiffServGenStatusServiceTableSizeCurrent size of the Service Tablero Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.1.12 |
agentDiffServGenStatusServiceTableMaxMax size of the Service Tablero Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.1.13 |
agentDiffServClassGroup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.13.5.10.7.2 |
agentDiffServClassIndexNextFreeThis object contains an unused value for classIndex, or a
zero to indicate that none exists.ro Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.2.1 |
agentDiffServClassTableA table of the DiffServ class entries SEQUENCE OF AgentDiffServClassEntry .1.3.6.1.4.1.890.1.5.13.5.10.7.2.2 |
agentDiffServClassEntryRepresents entry for a DiffServ traffic class AgentDiffServClassEntry .1.3.6.1.4.1.890.1.5.13.5.10.7.2.2.1 |
agentDiffServClassIndexThe identifier for DiffServ Class entry Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.2.2.1.1 |
agentDiffServClassNameName of the DiffServ traffic classrw DisplayString .1.3.6.1.4.1.890.1.5.13.5.10.7.2.2.1.2 |
agentDiffServClassTypeThe class type indicates how the individual class match
criteria are evaluated. For type all, all of the
individual match conditions must be true for a packet to
be considered a member of the class. For types any and
acl, only one of the match criteria must be true for a
packet to belong to the class; multiple matching criteria
are evaluated in a sequential order, with the highest
precedence awarded to the first criterion defined for the
class. An acl class type copies its set of match criteria
from the current rule definition of the specified
ACL number.rw Enumeration .1.3.6.1.4.1.890.1.5.13.5.10.7.2.2.1.3 |
agentDiffServClassAclNumThe access list number used to define the match conditions for the
DiffServ class.
This attribute is only valid if the value of agentDiffServClassType
is set to acl(3). Match conditions are copied from the ACL definition
at the time the class is created and do not reflect subsequent
changes to the ACL definition.
This attribute requires that the agentDiffServClassAclType object
also be set so that the ACL number can be interpreted relative to
ip(1) or mac(2) ACLs. The objects may be set in either order.
The QOS-ACL-MIB defines an aclIndex for IP ACLs and an
aclMacIndex for MAC ACLs. Setting this object to one of these
values per the agentDiffServClassAclType causes the corresponding
ACL rules to be used for creating the DiffServ class.rw Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.2.2.1.4 |
agentDiffServClassRuleIndexNextFreeThis object contains an unused value for classRuleIndex, or a
zero to indicate that none exists. This index is maintained
on a per-class basis.ro Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.2.2.1.5 |
agentDiffServClassStorageTypeStorage-type for this conceptual rowrw StorageType (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.13.5.10.7.2.2.1.6 |
agentDiffServClassRowStatusThe status of this conceptual row.
All RowStatus operations are permitted.
Other columns in this row may be modified when the status is 'active'.
Entries can not be deleted until all rows in agentDiffServClassRuleTable
with corresponding values of agentDiffServClassIndex have been deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.13.5.10.7.2.2.1.7 |
agentDiffServClassAclTypeThe access list type used to define the match conditions for the
DiffServ class. This attribute is only valid if the value of
agentDiffServClassType is set to acl(3).
When this attribute is set to ip(1), the agentDiffServClassAclNum
object is interpreted as an IP ACL number per the aclIndex definition
from the QOS-ACL-MIB. When set to mac(2), the agentDiffServClassAclNum
object is interpreted as a MAC ACL index per the aclMacIndex definition
in the QOS-ACL-MIB. When set to ipv6(3), the agentDiffServClassAclNum
object is interpreted as a IPv6 ACL index per the aclIpv6Index definition
in the QOS-ACL-MIB. All these objects and agentDiffServClassAclNum
must be set (in either order) for an agentDiffServClassType of acl(3).rw Enumeration .1.3.6.1.4.1.890.1.5.13.5.10.7.2.2.1.8 |
agentDiffServClassProtoTypeThe diffserv class protocol type used to indicate how to interpret any layer 3.
This attribute is only valid if the value of agentDiffServClassProtoType
is set to all(1) or any(2).rw Enumeration .1.3.6.1.4.1.890.1.5.13.5.10.7.2.2.1.9 |
agentDiffServClassRuleTableA table of the DiffServ Class Rule entries SEQUENCE OF AgentDiffServClassRuleEntry .1.3.6.1.4.1.890.1.5.13.5.10.7.2.3 |
agentDiffServClassRuleEntryRepresents entry for a set of class-match rules AgentDiffServClassRuleEntry .1.3.6.1.4.1.890.1.5.13.5.10.7.2.3.1 |
agentDiffServClassRuleIndexThe identifier for DiffServ Class Rule Table entry within a class Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.2.3.1.1 |
agentDiffServClassRuleMatchEntryTypeClass Rule match entry type, it determines which one of the individual
match conditions is defined for the present class rule. This object must
be created before any other match object in this row.rw Enumeration .1.3.6.1.4.1.890.1.5.13.5.10.7.2.3.1.2 |
agentDiffServClassRuleMatchCosThree-bit user priority field in the 802.1Q tag header of a tagged
Ethernet frame used as a class-match parameter - only valid if the
agentDiffServClassRuleMatchEntryType is set to cos(1). For frames
containing a double VLAN tag, this field is located in the first/outer
tag.rw Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.2.3.1.3 |
agentDiffServClassRuleMatchDstIpAddrDestination IP address match value for the class - only valid if the
agentDiffServClassRuleMatchEntryType is set to dstip(2).rw IpAddress .1.3.6.1.4.1.890.1.5.13.5.10.7.2.3.1.4 |
agentDiffServClassRuleMatchDstIpMaskDestination IP address mask match value for the class - only valid if the
agentDiffServClassRuleMatchEntryType is set to dstip(2). This mask value
identifies the portion of agentDiffServClassRuleMatchDstIpAddr that is
compared against a packet. A non-contiguous mask value is permitted.rw IpAddress .1.3.6.1.4.1.890.1.5.13.5.10.7.2.3.1.5 |
agentDiffServClassRuleMatchDstL4PortStartDestination layer 4 port range start match value for the class - only
valid if the agentDiffServClassRuleMatchEntryType is set to dstl4port(3).rw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.890.1.5.13.5.10.7.2.3.1.6 |
agentDiffServClassRuleMatchDstL4PortEndDestination layer 4 port range end match value for the class - only valid
if the agentDiffServClassRuleMatchEntryType is set to dstl4port(3).rw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.890.1.5.13.5.10.7.2.3.1.7 |
agentDiffServClassRuleMatchDstMacAddrDestination MAC address match value for the class - only valid if the
agentDiffServClassRuleMatchEntryType is set to dstmac(4).rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.13.5.10.7.2.3.1.8 |
agentDiffServClassRuleMatchDstMacMaskDestination MAC address mask match value for the class - only valid if the
agentDiffServClassRuleMatchEntryType is set to dstmac(4). This mask value
identifies the portion of agentDiffServClassRuleMatchDstMacAddr that is
compared against a packet. A non-contiguous mask value is permitted.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.13.5.10.7.2.3.1.9 |
agentDiffServClassRuleMatchEveryFlag to indicate that the class rule is defined to match on every packet,
regardless of content. - only valid if the
agentDiffServClassRuleMatchEntryType is set to every(5).ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.13.5.10.7.2.3.1.10 |
agentDiffServClassRuleMatchIpDscpIP DiffServ Code Point (DSCP) match value for the class - only valid if
the agentDiffServClassRuleMatchEntryType is set to ipdscp(6). The DSCP
is defined as the high-order six bits of the Service Type octet in the
IPv4 header.rw Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.2.3.1.11 |
agentDiffServClassRuleMatchIpPrecedenceIP Precedence match value for the class - only valid if the
agentDiffServClassRuleMatchEntryType is set to ipprecedence(7).
The Precedence bits are defined as the high-order three bits of
the Service Type octed in the IPv4 header.rw Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.2.3.1.12 |
agentDiffServClassRuleMatchIpTosBitsIP TOS bits match value for the class - only valid if the
agentDiffServClassRuleMatchEntryType is set to iptos(8).
The TOS bits are defined as all eight bits of the Service
Type octet in the IPv4 header.rw OCTET STRING .1.3.6.1.4.1.890.1.5.13.5.10.7.2.3.1.13 |
agentDiffServClassRuleMatchIpTosMaskIP TOS bits mask match value for the class - only valid if the
agentDiffServClassRuleMatchEntryType is set to iptos(8). This mask value
identifies the portion of agentDiffServClassRuleMatchIpTosBits that
is compared against a packet. A non-contiguous mask value is permitted.rw OCTET STRING .1.3.6.1.4.1.890.1.5.13.5.10.7.2.3.1.14 |
agentDiffServClassRuleMatchProtocolNumProtocol number match value for the class - only valid if the
agentDiffServClassRuleMatchEntryType is set to protocol(9).rw Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.2.3.1.15 |
agentDiffServClassRuleMatchRefClassIndexIndex of the corresponding referenced class - only valid if the
agentDiffServClassRuleMatchEntryType is set to refclass(10).
The set of match conditions defined for the reference class
are directly inherited by the current class.
Restrictions: 1) The class types of both, current class and
the reference class must be identical (i.e., any vs. any,
or all vs. all).
2) Self-referencing of class-name is not allowed.
3) Any attempt to delete the reference class while still
referenced by any class shall fail.
4) The combined match criteria of classname and reference class
name must be an allowed combination based on the class type.
Any subsequent changes to the reference class name match
criteria must maintain this validity, or the change attempt
shall fail.rw Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.2.3.1.16 |
agentDiffServClassRuleMatchSrcIpAddrSource IP address match value for the class - only valid if the
agentDiffServClassRuleMatchEntryType is set to srcip(11).rw IpAddress .1.3.6.1.4.1.890.1.5.13.5.10.7.2.3.1.17 |
agentDiffServClassRuleMatchSrcIpMaskSource IP address mask match value for the class - only valid if the
agentDiffServClassRuleMatchEntryType is set to srcip(11). This mask value
identifies the portion of agentDiffServClassRuleMatchSrcIpAddr that
is compared against a packet. A non-contiguous mask value is permitted.rw IpAddress .1.3.6.1.4.1.890.1.5.13.5.10.7.2.3.1.18 |
agentDiffServClassRuleMatchSrcL4PortStartSource layer 4 port range start match value for the class - only valid if
the agentDiffServClassRuleMatchEntryType is set to srcl4port(12).rw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.890.1.5.13.5.10.7.2.3.1.19 |
agentDiffServClassRuleMatchSrcL4PortEndSource layer 4 port range end match value for the class - only valid if
the agentDiffServClassRuleMatchEntryType is set to srcl4port(12).rw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.890.1.5.13.5.10.7.2.3.1.20 |
agentDiffServClassRuleMatchSrcMacAddrSource MAC address match value for the class - only valid if the
agentDiffServClassRuleMatchEntryType is set to srcmac(13).rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.13.5.10.7.2.3.1.21 |
agentDiffServClassRuleMatchSrcMacMaskSource MAC address mask match value for the class - only valid if the
agentDiffServClassRuleMatchEntryType is set to srcmac(13). This mask value
identifies the portion of agentDiffServClassRuleMatchSrcMacAddr that
is compared against a packet. A non-contiguous mask value is permitted.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.13.5.10.7.2.3.1.22 |
agentDiffServClassRuleMatchVlanIdVLAN ID match value for the class - only valid if the
agentDiffServClassRuleMatchEntryType is set to vlan(14).
This object is obsoleted by agentDiffServClassRuleMatchVlanIdStart
and agentDiffServClassRuleMatchVlanIdEnd.rwobsolete Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.2.3.1.23 |
agentDiffServClassRuleMatchExcludeFlagClass Rule exclude flag - when set to true(1), the match condition
identified by agentDiffServClassRuleMatchEntryType is negated. This means
that for a given field, every value is considered to be a match EXCEPT for
the value specified in the class rule. This flag must be false(2) for an
agendDiffServClassRuleMatchEntryType of refClass(10).
This object must be set after the agentDiffServClassRuleMatchEntryType
object, but before any other match object in this rowrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.13.5.10.7.2.3.1.24 |
agentDiffServClassRuleStorageTypeStorage-type for this conceptual rowrw StorageType (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.13.5.10.7.2.3.1.25 |
agentDiffServClassRuleRowStatusThe status of this conceptual row.
All RowStatus operations are permitted.
Other columns in this row may be modified when the status is 'active'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.13.5.10.7.2.3.1.26 |
agentDiffServClassRuleMatchCos2Three-bit user priority field in the second/inner 802.1Q tag header of a
double VLAN tagged Ethernet frame used as a class-match parameter
- only valid if the agentDiffServClassRuleMatchEntryType is set to
cos2(15).rw Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.2.3.1.27 |
agentDiffServClassRuleMatchEtypeKeyEthertype keyword match value for the class - only valid if the
agentDiffServClassRuleMatchEntryType is set to etype(16). A keyword
of custom(1) requires that the agentDiffServClassRuleMatchEtypeValue
object also be set.rw Enumeration .1.3.6.1.4.1.890.1.5.13.5.10.7.2.3.1.28 |
agentDiffServClassRuleMatchEtypeValueEthertype match value for the class - only valid if the
agentDiffServClassRuleMatchEntryType is set to etype(16) and
the agentDiffServClassRuleMatchEtypeKey is set to custom(1).
The allowed value for this object is 0x0600 to 0xFFFF.rw EtypeValue .1.3.6.1.4.1.890.1.5.13.5.10.7.2.3.1.29 |
agentDiffServClassRuleMatchVlanIdStartVLAN ID range start match value for the class - only valid if
the agentDiffServClassRuleMatchEntryType is set to vlanid(17).
The VLAN ID field is defined as the 12-bit VLAN identifier
in the 802.1Q tag header of a tagged Ethernet frame. This is
contained in the first/outer tag of a double VLAN tagged frame.rw Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.2.3.1.30 |
agentDiffServClassRuleMatchVlanIdEndVLAN ID range end match value for the class - only valid if
the agentDiffServClassRuleMatchEntryType is set to vlanid(17).
The VLAN ID field is defined as the 12-bit VLAN identifier
in the 802.1Q tag header of a tagged Ethernet frame. This is
contained in the first/outer tag of a double VLAN tagged frame.rw Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.2.3.1.31 |
agentDiffServClassRuleMatchVlanId2StartSecondary VLAN ID range start match value for the class - only valid if the
agentDiffServClassRuleMatchEntryType is set to vlanid2(18).
The Secondary VLAN ID field is defined as the 12-bit VLAN identifier
in the second/inner 802.1Q tag header of a double VLAN tagged Ethernet
frame.rw Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.2.3.1.32 |
agentDiffServClassRuleMatchVlanId2EndSecondary VLAN ID range end match value for the class - only valid if the
agentDiffServClassRuleMatchEntryType is set to vlanid2(18).
The Secondary VLAN ID field is defined as the 12-bit VLAN identifier
in the second/inner 802.1Q tag header of a double VLAN tagged Ethernet
frame.rw Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.2.3.1.33 |
agentDiffServClassRuleMatchFlowLabelFlow label is 20-bit number that is unique to an IPv6 packet, used by end
stations to signify quality-of-service handling in routers.rw Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.2.3.1.34 |
agentDiffServClassRuleMatchDstIpv6PrefixThe Ipv6 Prefix Address configured on the Service Port.rw Ipv6AddressPrefix (IPV6-TC) .1.3.6.1.4.1.890.1.5.13.5.10.7.2.3.1.35 |
agentDiffServClassRuleMatchSrcIpv6PrefixThe Ipv6 Prefix Address configured on the Service Port.rw Ipv6AddressPrefix (IPV6-TC) .1.3.6.1.4.1.890.1.5.13.5.10.7.2.3.1.36 |
agentDiffServClassRuleMatchDstIpv6PrefixLengthThe Prefix Length.rw Integer32 .1.3.6.1.4.1.890.1.5.13.5.10.7.2.3.1.37 |
agentDiffServClassRuleMatchSrcIpv6PrefixLengthThe Prefix Length.rw Integer32 .1.3.6.1.4.1.890.1.5.13.5.10.7.2.3.1.38 |
agentDiffServPolicyGroup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.13.5.10.7.3 |
agentDiffServPolicyIndexNextFreeThis object contains an unused value for agentDiffServPolicyIndex, or a
zero to indicate that none exists.ro Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.1 |
agentDiffServPolicyTableA table of the DiffServ policy entries. SEQUENCE OF AgentDiffServPolicyEntry .1.3.6.1.4.1.890.1.5.13.5.10.7.3.2 |
agentDiffServPolicyEntryRepresents entry for a DiffServ policy. AgentDiffServPolicyEntry .1.3.6.1.4.1.890.1.5.13.5.10.7.3.2.1 |
agentDiffServPolicyIndexThe identifier for DiffServ Policy table entry. Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.2.1.1 |
agentDiffServPolicyNameName of the policyrw DisplayString .1.3.6.1.4.1.890.1.5.13.5.10.7.3.2.1.2 |
agentDiffServPolicyTypeThe policy type dictates whether inbound or outbound policy
attribute statements are used in the policy definition.rw IntfDirection .1.3.6.1.4.1.890.1.5.13.5.10.7.3.2.1.3 |
agentDiffServPolicyInstIndexNextFreeThis object contains an unused value for agentDiffServPolicyInstIndex, or
a zero to indicate that none exists. This index is maintained on a
per-policy basis.ro Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.2.1.4 |
agentDiffServPolicyStorageTypeStorage-type for this conceptual rowrw StorageType (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.13.5.10.7.3.2.1.5 |
agentDiffServPolicyRowStatusThe status of this conceptual row.
active(1) - this Diffserv Policy is active
createAndGo(4) - set to this value to create an instance
destroy(6) - set to this value to delete an instance
All RowStatus operations are permitted.
Other columns in this row may be modified when the status is 'active'.
Entries can not be deleted until all rows in agentDiffServPolicyInstTable
with corresponding values of agentDiffServPolicyIndex have been deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.13.5.10.7.3.2.1.6 |
agentDiffServPolicyInstTableA table of the policy-class instance entries. SEQUENCE OF AgentDiffServPolicyInstEntry .1.3.6.1.4.1.890.1.5.13.5.10.7.3.3 |
agentDiffServPolicyInstEntryRepresents entry for a policy-class instance. AgentDiffServPolicyInstEntry .1.3.6.1.4.1.890.1.5.13.5.10.7.3.3.1 |
agentDiffServPolicyInstIndexThe identifier for policy-class Instance table entry within a policy. Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.3.1.1 |
agentDiffServPolicyInstClassIndexIndex of the DiffServ Class Table row, whose class definition is used
as the policy class instance. The class index identifies the classifier
definition used by the policy to establish an instance of that class
(to which policy attributes can be attached). This is what connects a
class (instance) to a policy.rw Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.3.1.2 |
agentDiffServPolicyInstAttrIndexNextFreeThis object contains an unused value for agentDiffServPolicyAttrIndex, or
a zero to indicate that none exists. This index is maintained on a
per-policy-class-instance basis.ro Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.3.1.3 |
agentDiffServPolicyInstStorageTypeStorage-type for this conceptual row.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.13.5.10.7.3.3.1.4 |
agentDiffServPolicyInstRowStatusThe status of this conceptual row.
active(1) - this Diffserv Policy Instance is active
createAndGo(4) - set to this value to create an instance
destroy(6) - set to this value to delete an instance
All RowStatus operations are permitted.
Other columns in this row may be modified when the status is 'active'.
Entries can not be deleted until all rows in agentDiffServPolicyAttrTable with
corresponding values of agentDiffServPolicyIndex and agentDiffServPolicyInstIndex
have been deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.13.5.10.7.3.3.1.5 |
agentDiffServPolicyAttrTableA table of policy attribute entries SEQUENCE OF AgentDiffServPolicyAttrEntry .1.3.6.1.4.1.890.1.5.13.5.10.7.3.4 |
agentDiffServPolicyAttrEntryRepresents entry for policy attributes AgentDiffServPolicyAttrEntry .1.3.6.1.4.1.890.1.5.13.5.10.7.3.4.1 |
agentDiffServPolicyAttrIndexThe identifier for policy-attribute entry Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.4.1.1 |
agentDiffServPolicyAttrStmtEntryTypePolicy attribute statement entry type
essential to determine which of the individual object(s)
is defined for this policy attribute statement. This object must be
created before any other policy attribute statement object in the row.
The markIpDscpVal(4), markIpPrecedenceVal(5), policeSimple(6),
policeSinglerate(7) and policeTworate(8) values are only allowed for an
agentDiffServPolicyType of in(1). The remaining values are only allowed
for an agentDiffServPolicyType of out(2).rw Enumeration .1.3.6.1.4.1.890.1.5.13.5.10.7.3.4.1.2 |
agentDiffServPolicyAttrStmtBandwidthCrateBandwidth committed rate attribute statement value
the minimum amount of bandwidth to be reserved for the specified
class instance within the policy. This attribute is only valid if
the value of agentDiffServPolicyAttrStmtEntryType is set to bandwidth(1).rwobsolete Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.4.1.3 |
agentDiffServPolicyAttrStmtBandwidthCrateUnitsBandwidth committed rate units attribute statement value
determines the interpretation of the
agentDiffServPolicyAttrStmtBandwidthCrate object as either
kilobits-per-second or as a percentage of interface link speed. This
attribute is only valid if the value of
agentDiffServPolicyAttrStmtEntryType is set to bandwidth(1).rwobsolete Enumeration .1.3.6.1.4.1.890.1.5.13.5.10.7.3.4.1.4 |
agentDiffServPolicyAttrStmtExpediteCrateExpedited (bandwidth) committed rate attribute statement value
identifies the maximum guaranteed amount of bandwidth to be reserved for
the specified class instance within the policy. This attribute is only
valid if the value of agentDiffServPolicyAttrStmtEntryType is set to
expedite(2).rwobsolete Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.4.1.5 |
agentDiffServPolicyAttrStmtExpediteCrateUnitsExpedited (bandwidth) committed rate units attribute statement value
agentDiffServPolicyAttrStmtExpediteCrate object as either
kilobits-per-second or as a percentage of interface link speed. This
attribute is only valid if the value of
agentDiffServPolicyAttrStmtEntryType is set to expedite(2).rwobsolete Enumeration .1.3.6.1.4.1.890.1.5.13.5.10.7.3.4.1.6 |
agentDiffServPolicyAttrStmtExpediteCburstExpedited (bandwidth) committed burst size attribute statement value,
specified in Kbytes. This attribute is only valid if the value of
agentDiffServPolicyAttrStmtEntryType is set to expedite(2).rwobsolete QosBurstSize .1.3.6.1.4.1.890.1.5.13.5.10.7.3.4.1.7 |
agentDiffServPolicyAttrStmtMarkCosValThree-bit user priority field value in the 802.1Q tag header of a tagged
Ethernet frame, marked as part of the inbound policy for a class instance.
For frames containing a double VLAN tag, this field is located in the
first/outer tag. This attribute is only valid if the value of
agentDiffServPolicyAttrStmtEntryType is set to markCosVal(3).rw Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.4.1.8 |
agentDiffServPolicyAttrStmtMarkIpDscpValSpecified IP DSCP value to mark in all inbound packets belonging to the
class-instance. This attribute is only valid if the value of
agentDiffServPolicyAttrStmtEntryType is set to markIpDscpVal(4).rw Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.4.1.9 |
agentDiffServPolicyAttrStmtMarkIpPrecedenceValSpecified IP Precedence value to mark in all inbound packets belonging to
the class-instance. This attribute is only valid if the value of
agentDiffServPolicyAttrStmtEntryType is set to markIpPrecedenceVal(5).rw Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.4.1.10 |
agentDiffServPolicyAttrStmtPoliceConformActPolicing conform action attribute statement value
the action taken on conforming traffic for the policing style
(simple,singlerate,tworate) currently configured for the specified
class instance within the policy. The default conform action is send(3).
This attribute is only valid if the value of
agentDiffServPolicyAttrStmtEntryType is policeSimple(6),
policeSinglerate(7), or policeTworate(8).rw Enumeration .1.3.6.1.4.1.890.1.5.13.5.10.7.3.4.1.11 |
agentDiffServPolicyAttrStmtPoliceConformValPolicing conform value attribute statement
used to mark conforming packets when the conform action
is one of the following:
markdscp(2) - mark IP DSCP field
markprec(3) - mark IP Precedence field
markcos(5) - mark 802.1p CoS field (first/only tag)
markcos2(6) - mark secondary 802.1p CoS field (inner tag)
markcosAsSecCos(7) - mark CoS as Secondary CoS value
This attribute is only valid if the value of
agentDiffServPolicyAttrStmtEntryType is policeSimple(6),
policeSinglerate(7), or policeTworate(8).rw Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.4.1.12 |
agentDiffServPolicyAttrStmtPoliceExceedActPolicing exceed action attribute statement value
the action taken on excess traffic for the policing style (singlerate,
tworate) currently configured for the specified class instance within the
policy. The default exceed action is drop(1). This attribute is only
valid if the value of agentDiffServPolicyAttrStmtEntryType is
policeSinglerate(7) or policeTworate(8).rw Enumeration .1.3.6.1.4.1.890.1.5.13.5.10.7.3.4.1.13 |
agentDiffServPolicyAttrStmtPoliceExceedValPolicing exceed value attribute statement
used to mark excess packets when the exceed action
is one of the following:
markdscp(2) - mark IP DSCP field
markprec(3) - mark IP Precedence field
markcos(5) - mark 802.1p CoS field (first/only tag)
markcos2(6) - mark secondary 802.1p CoS field (inner tag)
markcosAsSecCos(7) - mark CoS as Secondary CoS value
This is only valid if the value of agentDiffServPolicyAttrStmtEntryType is
policeSinglerate(7) or policeTworate(8).rw Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.4.1.14 |
agentDiffServPolicyAttrStmtPoliceNonconformActPolicing non-conform action attribute statement value
action taken on nonconforming traffic for the policing style (simple,
singlerate,tworate) currently configured for the specified class instance
within the policy. The default non-conform action is drop(1). This
attribute is only valid if the value of
agentDiffServPolicyAttrStmtEntryType is policeSimple(6),
policeSinglerate(7), or policeTworate(8).rw Enumeration .1.3.6.1.4.1.890.1.5.13.5.10.7.3.4.1.15 |
agentDiffServPolicyAttrStmtPoliceNonconformValPolicing non-conform value attribute statement
used to mark nonconforming packets when the nonconform action
is one of the following:
markdscp(2) - mark IP DSCP field
markprec(3) - mark IP Precedence field
markcos(5) - mark 802.1p CoS field (first/only tag)
markcos2(6) - mark secondary 802.1p CoS field (inner tag)
markcosAsSecCos(7) - mark CoS as Secondary CoS value
This attribute is only valid if the value of
agentDiffServPolicyAttrStmtEntryType is policeSimple(6),
policeSinglerate(7), or policeTworate(8).rw Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.4.1.16 |
agentDiffServPolicyAttrStmtPoliceSimpleCrateSimple policing committed rate attribute statement value, specified in
kbps. This attribute is only valid if the value of
agentDiffServPolicyAttrStmtEntryType is set to policeSimple(6).rw Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.4.1.17 |
agentDiffServPolicyAttrStmtPoliceSimpleCburstSimple policing committed burst size attribute statement value, specified
in Kbytes. This attribute is only valid if the value of
agentDiffServPolicyAttrStmtEntryType is set to policeSimple(6).rw QosBurstSize .1.3.6.1.4.1.890.1.5.13.5.10.7.3.4.1.18 |
agentDiffServPolicyAttrStmtPoliceSinglerateCrateSingle-rate policing committed rate attribute statement value, specified
in kbps. This attribute is only valid if the value of
agentDiffServPolicyAttrStmtEntryType is set to policeSinglerate(7).rw Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.4.1.19 |
agentDiffServPolicyAttrStmtPoliceSinglerateCburstSingle-rate policing committed burst size attribute statement value,
specified in Kbytes. This attribute is only valid if the value of
agentDiffServPolicyAttrStmtEntryType is set to policeSinglerate(7).rw QosBurstSize .1.3.6.1.4.1.890.1.5.13.5.10.7.3.4.1.20 |
agentDiffServPolicyAttrStmtPoliceSinglerateEburstSingle-rate policing excess burst size attribute statement value,
specified in Kbytes. This attribute is only valid if the value of
agentDiffServPolicyAttrStmtEntryType is set to policeSinglerate(7).rw QosBurstSize .1.3.6.1.4.1.890.1.5.13.5.10.7.3.4.1.21 |
agentDiffServPolicyAttrStmtPoliceTworateCrateTwo-rate policing committed rate attribute statement value, specified in
kbps. This attribute is only valid if the value of
agentDiffServPolicyAttrStmtEntryType is set to policeTworate(8).rw Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.4.1.22 |
agentDiffServPolicyAttrStmtPoliceTworateCburstTwo-rate policing committed burst size attribute statement value,
specified in Kbytes. This attribute is only valid if the value of
agentDiffServPolicyAttrStmtEntryType is set to policeTworate(8).rw QosBurstSize .1.3.6.1.4.1.890.1.5.13.5.10.7.3.4.1.23 |
agentDiffServPolicyAttrStmtPoliceTworatePrateTwo-rate policing peak rate attribute statement value, specified in kbps.
This attribute is only valid if the value of
agentDiffServPolicyAttrStmtEntryType is set to policeTworate(8).rw Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.4.1.24 |
agentDiffServPolicyAttrStmtPoliceTworatePburstTwo-rate policing peak burst size attribute statement value, specified in
Kbytes. This attribute is only valid if the value of
agentDiffServPolicyAttrStmtEntryType is set to policeTworate(8).rw QosBurstSize .1.3.6.1.4.1.890.1.5.13.5.10.7.3.4.1.25 |
agentDiffServPolicyAttrStmtRandomdropMinThreshRandom drop minimum threshold attribute statement value
queue depth minimum threshold in bytes used by the WRED algorithm. This
attribute is only valid if the value of
agentDiffServPolicyAttrStmtEntryType is set to randomdrop(9).rwobsolete Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.4.1.26 |
agentDiffServPolicyAttrStmtRandomdropMaxThreshRandom drop maximum threshold attribute statement value
queue depth maximum threshold in bytes used by the WRED algorithm. This
attribute is only valid if the value of
agentDiffServPolicyAttrStmtEntryType is set to randomdrop(9).rwobsolete Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.4.1.27 |
agentDiffServPolicyAttrStmtRandomdropMaxDropProbRandom drop maximum drop probability attribute statement value
packet drop probability when the queue depth average reaches its maximum
threshold. It is expressed as a percentage, and is an integer from 0 to
100. This attribute is only valid if the value of
agentDiffServPolicyAttrStmtEntryType is set to randomdrop(9).rwobsolete Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.4.1.28 |
agentDiffServPolicyAttrStmtRandomdropSamplingRateRandom drop sampling rate attribute statement value
the queue depth is sampled for computing an average, expressed in
microseconds. This value is an integer from 0 to 1000000, with a default
value of 0 (meaning per packet sampling). This attribute is only valid if
the value of agentDiffServPolicyAttrStmtEntryType is set to randomdrop(9).rwobsolete Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.4.1.29 |
agentDiffServPolicyAttrStmtRandomdropDecayExponentRandom drop decay exponent attribute statement value
quickly the average queue length calculation decays over time, with a
higher number causing a slower decay. This value is an integer from 0 to
16, with a default of 9. This attribute is only valid if the value of
agentDiffServPolicyAttrStmtEntryType is set to randomdrop(9).rwobsolete Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.4.1.30 |
agentDiffServPolicyAttrStmtShapeAverageCrateAverage-rate shaping committed rate attribute statement value, specified
in kbps
specified class , which limits transmissions for the class to the
committed information rate, with any excess traffic delayed via queueing.
This attribute is only valid if the value of
agentDiffServPolicyAttrStmtEntryType is set to shapeAverage(10).rwobsolete Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.4.1.31 |
agentDiffServPolicyAttrStmtShapePeakCratePeak-rate shaping committed rate attribute statement value, specified in
kbps
class , which allows transmissions for the class to exceed the committed
information rate by sending excess traffic with the understanding that it
could be dropped by a downstream network element. This attribute is only
valid if the value of agentDiffServPolicyAttrStmtEntryType is set to
shapePeak(11).rwobsolete Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.4.1.32 |
agentDiffServPolicyAttrStmtShapePeakPratePeak-rate shaping peak rate attribute statement value, specified in kbps
which allows transmissions for the class to exceed the committed
information rate by sending excess traffic with the understanding that it
could be dropped by a downstream network element. This attribute is only
valid if the value of agentDiffServPolicyAttrStmtEntryType is set to
shapePeak(11).rwobsolete Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.4.1.33 |
agentDiffServPolicyAttrStorageTypeStorage-type for this conceptual row.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.13.5.10.7.3.4.1.34 |
agentDiffServPolicyAttrRowStatusThe status of this conceptual row.
active(1) - this Diffserv Policy Attribute is active
createAndGo(4) - set to this value to create an instance
destroy(6) - set to this value to delete an instance
All RowStatus operations are permitted.
Other columns in this row may be modified when the status is 'active'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.13.5.10.7.3.4.1.35 |
agentDiffServPolicyAttrStmtAssignQueueIdQueue identifier to which all inbound packets belonging to this
class-instance are directed. This attribute is only valid if the
value of agentDiffServPolicyAttrStmtEntryType is set to assignQueue(12).rw Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.4.1.36 |
agentDiffServPolicyAttrStmtDropFlag to indicate that all inbound packets belonging to this
class-instance are dropped at ingress. This attribute is
only valid if the agentDiffServPolicyAttrStmtEntryType is
set to drop(13).ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.13.5.10.7.3.4.1.37 |
agentDiffServPolicyAttrStmtMarkCos2ValThree-bit user priority field value in the second/inner 802.1Q tag header of
a double VLAN tagged Ethernet frame, marked as part of the inbound policy
for a class instance. This attribute is only valid if the value of
agentDiffServPolicyAttrStmtEntryType is set to markCos2Val(14).rw Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.4.1.38 |
agentDiffServPolicyAttrStmtPoliceColorConformIndexIndex of the DiffServ Class Table row whose class definition is used
to specify the policing color conform mode and value. This identifies
incoming traffic categorized as 'green' packets in the
network. This attribute is only valid if the value of
agentDiffServPolicyAttrStmtEntryType is policeSimple(6),
policeSinglerate(7), or policeTworate(8).
The DiffServ class referred to by this object must comply with
the following restrictions:
1) Contains only a single, non-excluded match condition identifying
one of the following fields: COS, IP DSCP, IP Precedence, or
Secondary COS, in accordance with platform support capabilities.
This is represented by an agentDiffServClassRuleMatchEntryType value
of cos(1), ipdscp(6), ipprecedence(7), or cos2(15), respectively.
2) Must not conflict with any (non-excluded) match conditions in the
classifier used for this policy-class instance, as indicated by the
agentDiffServPolicyInstClassIndex object.
3) The color conform mode and value identified by this class index must
not be the same as an existing color-aware exceed mode and value
defined by the agentDiffServPolicyAttrStmtPoliceColorExceedIndex object.
A class index value of 0 for this object indicates conform color awareness
is not being used (e.g. color-blind mode). Setting this object to 0 causes
the agentDiffServPolicyAttrStmtPoliceColorExceedIndex object to be set
to 0 as well.rw Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.4.1.39 |
agentDiffServPolicyAttrStmtPoliceColorConformModePolicing color conform mode
mode of conforming traffic for the policing style (simple,
singlerate, or tworate) currently configured for the specified
class instance within the policy. The default value is blind(1).
Any value other than blind(1) denotes the packet field to
check for the existing conform color marking, which is compared to the
agentDiffServPolicyAttrStmtPoliceColorConformVal object value. Packets
matching this specification are considered to be colored 'green'.
This read-only object reflects the DiffServ class definition as indicated by
agentDiffServPolicyAttrStmtPoliceColorConformIndex. This attribute
is only valid for agentDiffServPolicyAttrStmtEntryType values of
policeSimple(6), policeSinglerate(7), or policeTworate(8).ro Enumeration .1.3.6.1.4.1.890.1.5.13.5.10.7.3.4.1.40 |
agentDiffServPolicyAttrStmtPoliceColorConformValPolicing color conform value
packet mark value of conforming traffic for the policing style
(simple, singlerate, or tworate) currently configured for the
specified class instance within the policy.
For the color conform field indicated by
agentDiffServPolicyAttrStmtPoliceColorConformMode, packets containing
this value are considered to be colored 'green'.
This read-only object reflects the DiffServ class definition as indicated by
agentDiffServPolicyAttrStmtPoliceColorConformIndex. This attribute
is only valid for agentDiffServPolicyAttrStmtEntryType values of
policeSimple(6), policeSinglerate(7), or policeTworate(8), and
agentDiffServPolicyAttrStmtPoliceColorConformMode values of
cos(2), cos2(3), ipdscp(4), or ipprec(5).ro Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.4.1.41 |
agentDiffServPolicyAttrStmtPoliceColorExceedIndexIndex of the DiffServ Class Table row whose class definition is used
to specify the policing color exceed mode and value. This identifies
incoming traffic categorized as 'yellow' packets in the
network. This attribute is only valid if the value of
agentDiffServPolicyAttrStmtEntryType is policeSinglerate(7) or
policeTworate(8).
The DiffServ class referred to by this object must comply with
the following restrictions:
1) Contains only a single, non-excluded match condition identifying
one of the following fields: COS, IP DSCP, IP Precedence, or
Secondary COS, in accordance with platform support capabilities.
This is represented by an agentDiffServClassRuleMatchEntryType value
of cos(1), ipdscp(6), ipprecedence(7), or cos2(15), respectively.
2) Must not conflict with any (non-excluded) match conditions in the
classifier used for this policy-class instance, as indicated by the
agentDiffServPolicyInstClassIndex object.
3) The color exceed mode and value identified by this class index must
not be the same as an existing color-aware exceed mode and value
defined by the agentDiffServPolicyAttrStmtPoliceColorConformIndex object.
A class index value of 0 for this object indicates exceed color awareness
is not being used. When the agentDiffServPolicyAttrStmtPoliceColorConformIndex
object is 0, indicating color-blind operation, this object must also be 0.
When a non-0 value is used for the agentDiffServPolicyAttrStmtPoliceColorConformIndex
object, this object may remain set to 0 if exceed color awareness is not
desired, or may be set to an appropriate class index value to activate exceed
color aware mode.rw Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.4.1.42 |
agentDiffServPolicyAttrStmtPoliceColorExceedModePolicing color exceed mode
mode of exceeding traffic for the policing style (singlerate
or tworate) currently configured for the specified
class instance within the policy. The default value is blind(1).
Any value other than blind(1) or unused(6) denotes the packet field to
check for the existing exceed color marking, which is compared to the
agentDiffServPolicyAttrStmtPoliceColorExceedVal object value. Packets
matching this specification are considered to be colored 'yellow'.
Use of exceed color awareness is optional, and this field is set to
unused(6) when color conform aware policing is used but the color exceed
value is not used. When agentDiffServPolicyAttrStmtPoliceColorConformMode
value is blind(1), this object is blind(1) as well.
This read-only object reflects the DiffServ class definition as indicated by
agentDiffServPolicyAttrStmtPoliceColorExceedIndex. This attribute
is only valid for agentDiffServPolicyAttrStmtEntryType values of
policeSinglerate(7) or policeTworate(8).ro Enumeration .1.3.6.1.4.1.890.1.5.13.5.10.7.3.4.1.43 |
agentDiffServPolicyAttrStmtPoliceColorExceedValPolicing color exceed value
packet mark value of exceeding traffic for the policing style
(singlerate or tworate) currently configured for the
specified class instance within the policy.
For the color exceed field indicated by
agentDiffServPolicyAttrStmtPoliceColorExceedMode, packets containing
this value are considered to be colored 'yellow'.
This read-only object reflects the DiffServ class definition as indicated by
agentDiffServPolicyAttrStmtPoliceColorExceedIndex. This attribute
is only valid for agentDiffServPolicyAttrStmtEntryType values of
policeSinglerate(7) or policeTworate(8), and
agentDiffServPolicyAttrStmtPoliceColorExceedMode values of
cos(2), cos2(3), ipdscp(4), or ipprec(5).ro Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.4.1.44 |
agentDiffServPolicyAttrStmtRedirectIntfExternal interface number to which all inbound packets belonging to this
class-instance are redirected. This attribute is only valid if the
value of agentDiffServPolicyAttrStmtEntryType is set to redirect(15).rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.890.1.5.13.5.10.7.3.4.1.45 |
agentDiffServPolicyAttrStmtMirrorIntfExternal interface number to which all inbound packets belonging to this
class-instance are mirrored. This attribute is only valid if the
value of agentDiffServPolicyAttrStmtEntryType is set to mirror(16).rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.890.1.5.13.5.10.7.3.4.1.46 |
agentDiffServPolicyAttrStmtMarkCosAsSecCosFlag to indicate that all inbound packets belonging to this
class-instance are marked with secondary cos at ingress. This attribute is
only valid if the agentDiffServPolicyAttrStmtEntryType is
set to markCosAsSecCos(17).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.13.5.10.7.3.4.1.47 |
agentDiffServPolicyAttrStmtRedirectIpNextHopNext hop IP address to which all inbound packets belonging to this
class-instance are redirected. This attribute is only valid if the
value of agentDiffServPolicyAttrStmtEntryType is set to redirectIpNextHop(18).rw IpAddress .1.3.6.1.4.1.890.1.5.13.5.10.7.3.4.1.48 |
agentDiffServPolicyAttrStmtRedirectIpNextHopIpv6Next hop IPv6 address to which all inbound packets belonging to this
class-instance are redirected. This attribute is only valid if the
value of agentDiffServPolicyAttrStmtEntryType is set to redirectIpNextHopIpv6(19).rw Ipv6Address (IPV6-TC) .1.3.6.1.4.1.890.1.5.13.5.10.7.3.4.1.49 |
agentDiffServPolicyAttrStmtRedirectIpNextHopIpv6IntfNext hop IPv6 interface number to which all inbound packets belonging to this
class-instance are redirected. This attribute is only valid if the
value of agentDiffServPolicyAttrStmtEntryType is set to redirectIpNextHopIpv6Intf(20).rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.890.1.5.13.5.10.7.3.4.1.50 |
agentDiffServPolicyPerfInTableA table of inbound policy-class performance entries SEQUENCE OF AgentDiffServPolicyPerfInEntry .1.3.6.1.4.1.890.1.5.13.5.10.7.3.5 |
agentDiffServPolicyPerfInEntryRepresents entry for the performance attributes of the associated inbound
policy-class instance AgentDiffServPolicyPerfInEntry .1.3.6.1.4.1.890.1.5.13.5.10.7.3.5.1 |
agentDiffServPolicyPerfInOfferedOctetsOffered octets count for the inbound policy-class instance performance
entry.ro Counter32 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.5.1.1 |
agentDiffServPolicyPerfInOfferedPacketsOffered packets count for the inbound policy-class instance performance
entry.ro Counter32 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.5.1.2 |
agentDiffServPolicyPerfInDiscardedOctetsDiscarded octets count for the inbound policy-class instance performance
entry.ro Counter32 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.5.1.3 |
agentDiffServPolicyPerfInDiscardedPacketsDiscarded packets count for the inbound policy-class instance performance
entry.ro Counter32 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.5.1.4 |
agentDiffServPolicyPerfInHCOfferedOctetsOffered octets high capacity count for the inbound policy-class instance
performance entry.ro Counter64 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.5.1.5 |
agentDiffServPolicyPerfInHCOfferedPacketsOffered packets high capacity count for the inbound policy-class instance
performance entry.ro Counter64 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.5.1.6 |
agentDiffServPolicyPerfInHCDiscardedOctetsDiscarded octets high capacity count for the inbound policy-class instance
performance entry.ro Counter64 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.5.1.7 |
agentDiffServPolicyPerfInHCDiscardedPacketsDiscarded packets high capacity count for the inbound policy-class
instance performance entry.ro Counter64 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.5.1.8 |
agentDiffServPolicyPerfInStorageTypeStorage-type for this conceptual row.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.13.5.10.7.3.5.1.9 |
agentDiffServPolicyPerfInRowStatusThe status of this conceptual row.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.13.5.10.7.3.5.1.10 |
agentDiffServPolicyPerfOutTableA table of outbound policy-class performance entries SEQUENCE OF AgentDiffServPolicyPerfOutEntry .1.3.6.1.4.1.890.1.5.13.5.10.7.3.6 |
agentDiffServPolicyPerfOutEntryRepresents entry for the performance attributes of the associated outbound
policy-class instance AgentDiffServPolicyPerfOutEntry .1.3.6.1.4.1.890.1.5.13.5.10.7.3.6.1 |
agentDiffServPolicyPerfOutTailDroppedOctetsTail-dropped octets count for the outbound policy-class instance
performance entry.roobsolete Counter32 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.6.1.1 |
agentDiffServPolicyPerfOutTailDroppedPacketsTail-dropped packets count for the outbound policy-class instance
performance entry.roobsolete Counter32 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.6.1.2 |
agentDiffServPolicyPerfOutRandomDroppedOctetsRandom-dropped octets count for the outbound policy-class instance
performance entry.roobsolete Counter32 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.6.1.3 |
agentDiffServPolicyPerfOutRandomDroppedPacketsRandom-dropped packets count for the outbound policy-class instance
performance entry.roobsolete Counter32 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.6.1.4 |
agentDiffServPolicyPerfOutShapeDelayedOctetsShape-delayed octets count for the outbound policy-class instance
performance entry.roobsolete Counter32 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.6.1.5 |
agentDiffServPolicyPerfOutShapeDelayedPacketsShape-delayed packets count for the outbound policy-class instance
performance entry.roobsolete Counter32 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.6.1.6 |
agentDiffServPolicyPerfOutSentOctetsSent octets count for the outbound policy-class instance performance
entry.roobsolete Counter32 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.6.1.7 |
agentDiffServPolicyPerfOutSentPacketsSent packets count for the outbound policy-class instance performance
entry.roobsolete Counter32 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.6.1.8 |
agentDiffServPolicyPerfOutHCTailDroppedOctetsTail-dropped octets high capacity count for the outbound policy-class
instance performance entry.roobsolete Counter64 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.6.1.9 |
agentDiffServPolicyPerfOutHCTailDroppedPacketsTail-dropped packets high capacity count for the outbound policy-class
instance performance entry.roobsolete Counter64 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.6.1.10 |
agentDiffServPolicyPerfOutHCRandomDroppedOctetsRandom-dropped octets high capacity count for the outbound policy-class
instance performance entry.roobsolete Counter64 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.6.1.11 |
agentDiffServPolicyPerfOutHCRandomDroppedPacketsRandom-dropped packets high capacity count for the outbound policy-class
instance performance entry.roobsolete Counter64 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.6.1.12 |
agentDiffServPolicyPerfOutHCShapeDelayedOctetsShape-delayed octets high capacity count for the outbound policy-class
instance performance entry.roobsolete Counter64 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.6.1.13 |
agentDiffServPolicyPerfOutHCShapeDelayedPacketsShape-delayed packets high capacity count for the outbound policy-class
instance performance entry.roobsolete Counter64 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.6.1.14 |
agentDiffServPolicyPerfOutHCSentOctetsSent octets high capacity count for the outbound policy-class instance
performance entry.roobsolete Counter64 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.6.1.15 |
agentDiffServPolicyPerfOutHCSentPacketsSent packets high capacity count for the outbound policy-class instance
performance entry.roobsolete Counter64 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.6.1.16 |
agentDiffServPolicyPerfOutOfferedOctetsOffered octets count for the outbound policy-class instance performance
entry.ro Counter32 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.6.1.17 |
agentDiffServPolicyPerfOutOfferedPacketsOffered packets count for the outbound policy-class instance performance
entry.ro Counter32 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.6.1.18 |
agentDiffServPolicyPerfOutDiscardedOctetsDiscarded octets count for the outbound policy-class instance performance
entry.ro Counter32 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.6.1.19 |
agentDiffServPolicyPerfOutDiscardedPacketsDiscarded packets count for the outbound policy-class instance performance
entry.ro Counter32 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.6.1.20 |
agentDiffServPolicyPerfOutHCOfferedOctetsOffered octets high capacity count for the outbound policy-class instance
performance entry.ro Counter64 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.6.1.21 |
agentDiffServPolicyPerfOutHCOfferedPacketsOffered packets high capacity count for the outbound policy-class instance
performance entry.ro Counter64 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.6.1.22 |
agentDiffServPolicyPerfOutHCDiscardedOctetsDiscarded octets high capacity count for the outbound policy-class instance
performance entry.ro Counter64 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.6.1.23 |
agentDiffServPolicyPerfOutHCDiscardedPacketsDiscarded packets high capacity count for the outbound policy-class
instance performance entry.ro Counter64 .1.3.6.1.4.1.890.1.5.13.5.10.7.3.6.1.24 |
agentDiffServPolicyPerfOutStorageTypeStorage-type for this conceptual row.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.13.5.10.7.3.6.1.25 |
agentDiffServPolicyPerfOutRowStatusThe status of this conceptual row.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.13.5.10.7.3.6.1.26 |
agentDiffServServiceGroup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.13.5.10.7.4 |
agentDiffServServiceTableA table of the service entries. SEQUENCE OF AgentDiffServServiceEntry .1.3.6.1.4.1.890.1.5.13.5.10.7.4.1 |
agentDiffServServiceEntryRepresents entry for policy assigned to an interface in a particular
direction. AgentDiffServServiceEntry .1.3.6.1.4.1.890.1.5.13.5.10.7.4.1.1 |
agentDiffServServiceIfIndexExternal interface number of the interface to which policy is assigned. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.890.1.5.13.5.10.7.4.1.1.1 |
agentDiffServServiceIfDirectionInterface direction to which the policy is assigned. IntfDirection .1.3.6.1.4.1.890.1.5.13.5.10.7.4.1.1.2 |
agentDiffServServicePolicyIndexIndex of the Policy Table row whose policy definition is attached to the
interface in the specified direction.rw Unsigned32 .1.3.6.1.4.1.890.1.5.13.5.10.7.4.1.1.3 |
agentDiffServServiceIfOperStatusThe current operational state of the DiffServ service
interface. If agentDiffServGenStatusAdminMode is
disable(2) then agentDiffServServiceIfOperStatus should
be down(2). If agentDiffServServiceGenStatusAdminMode
is changed to enable(1) then agentDiffServServiceIfOperStatus
should change to up(1) if the service interface is ready
to send and receive DiffServ traffic; it should remain
in the down(2) state if the underlying interface hardware
is not in a link up condition, if the policy definition
represented by agentDiffServServicePolicyIndex is incompatible
with the interface (e.g., requires more bandwidth than the
current capacity of the interface), or if the policy definition
is considered to be incomplete (e.g., one or more composite
rows is not in the active(1) state).ro Enumeration .1.3.6.1.4.1.890.1.5.13.5.10.7.4.1.1.4 |
agentDiffServServiceStorageTypeStorage-type for this conceptual rowrw StorageType (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.13.5.10.7.4.1.1.5 |
agentDiffServServiceRowStatusThe status of this conceptual row.
active(1) - Diffserv is active
createAndGo(4) - set to this value to create an instance
destroy(6) - set to this value to delete an instance
All RowStatus operations are permitted.
Other columns in this row may be modified when the status is 'active'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.13.5.10.7.4.1.1.6 |
agentDiffServServicePerfTableA table of service performance entries. SEQUENCE OF AgentDiffServServicePerfEntry .1.3.6.1.4.1.890.1.5.13.5.10.7.4.2 |
agentDiffServServicePerfEntryRepresents a service performance entry. AgentDiffServServicePerfEntry .1.3.6.1.4.1.890.1.5.13.5.10.7.4.2.1 |
agentDiffServServicePerfOfferedOctetsOffered octets count for the specified service interface and directionro Counter32 .1.3.6.1.4.1.890.1.5.13.5.10.7.4.2.1.1 |
agentDiffServServicePerfOfferedPacketsOffered packets count for specified service interface and directionro Counter32 .1.3.6.1.4.1.890.1.5.13.5.10.7.4.2.1.2 |
agentDiffServServicePerfDiscardedOctetsDiscarded octets count for the specified service interface and directionro Counter32 .1.3.6.1.4.1.890.1.5.13.5.10.7.4.2.1.3 |
agentDiffServServicePerfDiscardedPacketsDiscarded packets count for the specified service interface and directionro Counter32 .1.3.6.1.4.1.890.1.5.13.5.10.7.4.2.1.4 |
agentDiffServServicePerfSentOctetsSent octets count for the specified service interface and directionro Counter32 .1.3.6.1.4.1.890.1.5.13.5.10.7.4.2.1.5 |
agentDiffServServicePerfSentPacketsSent packets count for the specified service interface and directionro Counter32 .1.3.6.1.4.1.890.1.5.13.5.10.7.4.2.1.6 |
agentDiffServServicePerfHCOfferedOctetsOffered octets high capacity count for the specified service interface
and directionro Counter64 .1.3.6.1.4.1.890.1.5.13.5.10.7.4.2.1.7 |
agentDiffServServicePerfHCOfferedPacketsOffered packets high capacity count for the specified service interface
and directionro Counter64 .1.3.6.1.4.1.890.1.5.13.5.10.7.4.2.1.8 |
agentDiffServServicePerfHCDiscardedOctetsDiscarded octets high capacity count for the specified service interface
and directionro Counter64 .1.3.6.1.4.1.890.1.5.13.5.10.7.4.2.1.9 |
agentDiffServServicePerfHCDiscardedPacketsDiscarded packets high capacity count for the specified service interface
and directionro Counter64 .1.3.6.1.4.1.890.1.5.13.5.10.7.4.2.1.10 |
agentDiffServServicePerfHCSentOctetsSent octets high capacity count for the specified service interface and
directionro Counter64 .1.3.6.1.4.1.890.1.5.13.5.10.7.4.2.1.11 |
agentDiffServServicePerfHCSentPacketsSent packets high capacity count for the specified service interface and
directionro Counter64 .1.3.6.1.4.1.890.1.5.13.5.10.7.4.2.1.12 |