QB-SONET-MIB
The QB-SONET-MIB extends standard SONET monitoring capabilities to Quantum Bridge hardware, enabling the retrieval of vendor-specific link performance counters, error statistics, and interface status parameters not covered by the IETF standard MIB.
Imported Objects
Objects
23 total| Object Name |
|---|
qbSonetMIBThis module defines additional objects for management of SONET links in Quantum Bridge devices, above and beyond what is defined in the standard SONET mib. MODULE-IDENTITY .1.3.6.1.4.1.4323.2.6 |
qbSonetObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4323.2.6.1 |
qbSonetAlarmModeSetting this object causes enabling or disabling optical ports alarms(LOS, LF, SD or SF). At initial start up time all optical ports are enabled. The user can change the port state to 'disabled' if there are not connections configured on the port. Upon configuring the first active connection to the optical port, the system automatically enables the port alarms. This object is used in conjunction with qbSonetSlot object which defines a scope of the configuration parameter: chassis wide or slot wide. enabled(1) - enables alarms on the selected slot or chassis. disabled(2) - disables alarms on the dormant optical ports of the selected slot or chassis. When read, the value of the object is always 'unknown(3)' This parameter is applied to WAN622, S622, and Q155 cards.rw Enumeration .1.3.6.1.4.1.4323.2.6.1.1 |
qbSonetScramblingModeSetting this object defines whether ATM cell payload is enabled or disabled. At initial start up time scrambling is set to 'enabled(1)' This object is used in conjunction with qbSonetSlot object which defines a scope of the configuration parameter: chassis wide or slot wide. enabled(1) - enables alarms on the selected slot or chassis. disabled(2) - disables alarms on the dormant optical ports of the selected slot or chassis. When read, the value of the object is alwayd 'unknown(3)' This parameter is applied to WAN622, S622, and Q155 cards.rw Enumeration .1.3.6.1.4.1.4323.2.6.1.2 |
qbSonetMediumTypeSetting this object defines whether SONET, SDH, SDHDS1, or SONETM13 signal is used across the chassis/slot. At initial start up the object is set to 'sonet(1)' This object is used in conjunction with qbSonetSlot object which defines a scope of the configuration parameter: chassis wide or slot wide. sonet(1) - sets signal format to 'sonet'. sdh(2) - sets signal format to 'sdh/VC12' sdhDs1(2) - sets signal format to 'sdh/VC11' sonetM13(2) - sets signal format to 'sonet/M13 payload' When read, the value of the object is always 'unknown(3)' This parameter is applied to D155VT/VC-T.rw QbSonetType .1.3.6.1.4.1.4323.2.6.1.3 |
qbSonetSlotThis object defines a scope of the applied configuration parameter. If the object is set to non-zero value all ports of the defined slot are configured. When object is set to 0, this setting is applied to all applicable optical cards.rw INTEGER .1.3.6.1.4.1.4323.2.6.1.4 |
qbSonetTables OBJECT IDENTIFIER .1.3.6.1.4.1.4323.2.6.2 |
qbSonetMediumTableThe Quantum Bridge SONET Medium table contains extensions to the SONET Medium table. SEQUENCE OF QbSonetMediumEntry .1.3.6.1.4.1.4323.2.6.2.1 |
qbSonetMediumEntryAn entry in the Quantum Bridge SONET Medium table. QbSonetMediumEntry .1.3.6.1.4.1.4323.2.6.2.1.1 |
qbSonetPortTxClockSourceThe source of Transmit Clock. recovered indicates that the recovered receive clock is used as the transmit clock. local indicates that a local clock source is used.rwdeprecated Enumeration .1.3.6.1.4.1.4323.2.6.2.1.1.1 |
qbSonetPortScramblingModeThe scrambling mode of the sonet interface.rw Enumeration .1.3.6.1.4.1.4323.2.6.2.1.1.2 |
qbSonetPortAlarmModeThe alarm mode of the sonet interface.rw Enumeration .1.3.6.1.4.1.4323.2.6.2.1.1.3 |
qbSonetPortMediumTypeSetting this object defines whether SONET, SDH, SDHDS1, or SONETM13 signal is used across the chassis/slot. At initial start up the object is set to 'sonet(1)' This object is used in conjunction with qbSonetSlot object which defines a scope of the configuration parameter: chassis wide or slot wide. sonet(1) - sets signal format to 'sonet'. sdh(2) - sets signal format to 'sdh/VC12' sdhDs1(2) - sets signal format to 'sdh/VC11' sonetM13(2) - sets signal format to 'sonet/M13 payload' When read, the value of the object is always 'unknown(3)' This parameter is applied to D155VT/VC-T.rw QbSonetType .1.3.6.1.4.1.4323.2.6.2.1.1.4 |
qbSonetStatTableThe Quantum Bridge SONET Stat table contains SONET statistics. SEQUENCE OF QbSonetStatEntry .1.3.6.1.4.1.4323.2.6.2.2 |
qbSonetStatEntryAn entry in the Quantum Bridge SONET Stat table. QbSonetStatEntry .1.3.6.1.4.1.4323.2.6.2.2.1 |
qbSonetSectionBIPThis object gives the number of section bit interleaved parity erorrs.ro Counter32 .1.3.6.1.4.1.4323.2.6.2.2.1.1 |
qbSonetLineBIPThis object gives the number of line bit interleaved parity erorrs.ro Counter32 .1.3.6.1.4.1.4323.2.6.2.2.1.2 |
qbSonetPathBIPThis object gives the number of path bit interleaved parity erorrs.ro Counter32 .1.3.6.1.4.1.4323.2.6.2.2.1.3 |
qbSonetConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4323.2.6.3 |
qbSonetCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.4323.2.6.3.1 |
qbSonetComplianceThe compliance statement for all agents that support this MIB. A compliant agent implements all objects defined in this MIB. Unknown .1.3.6.1.4.1.4323.2.6.3.1.1 |
qbSonetGroups OBJECT IDENTIFIER .1.3.6.1.4.1.4323.2.6.3.2 |
qbSonetAllGroupThe set of all accessible objects in this MIB. Unknown .1.3.6.1.4.1.4323.2.6.3.2.1 |
More MIBs from Quantum Bridge
Browse all Quantum BridgeMIBs →SNMP MIB module
The QB-ATM-MIB extends standard ATM management capabilities to monitor and control ATM link parameters on Quantum Bridge hardware, specifically exposing vendor-specific objects and counters not defined in the IETF standard ATM-MIB. This module enables granular visibility into ATM interface states, traffic statistics, and error conditions unique to the Quantum Bridge platform.
SNMP MIB module
The QB-PVC-MIB facilitates the monitoring and configuration of Permanent Virtual Circuit (PVC) parameters, including status, traffic counters, and provisioning attributes, specifically within Quantum bridge networking devices. This module enables network administrators to track PVC session states and performance metrics essential for maintaining Layer 2 virtual circuit integrity.
The QB-VT15-MIB enables the provisioning and management of VT1.5/VC12 link parameters specifically within Quantum Bridge devices. This module facilitates the configuration of virtual tributary multiplexing attributes required for synchronous optical networking (SONET/SDH) transport.
The QB-VLAN-MGMT-MIB enables SNMP-based provisioning and monitoring of QB proprietary VLANs by exposing policing and thresholding metrics for administrator-defined traffic policies. It facilitates the retrieval of operational status and configuration parameters specific to QB's VLAN management capabilities.