QB-RPT-MIB
The QB-RPT-MIB enables the QBCLI interface on Quantum Bridge devices to retrieve and monitor specific report data objects for operational analysis and device management.
Imported Objects
Objects
19 total| Object Name |
|---|
qbSysRptMIBThis module defines objects for retrieving reports bi the QBCLI. in Quantum Bridge devices. MODULE-IDENTITY .1.3.6.1.4.1.4323.2.8 |
qbSysRptObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4323.2.8.1 |
qbSysRptTables OBJECT IDENTIFIER .1.3.6.1.4.1.4323.2.8.2 |
qbSysRptTableThe Quantum Bridge qbSysReport table contains a list of currently implemented reports. The table is visble only for the CLI community string SEQUENCE OF QbSysRptEntry .1.3.6.1.4.1.4323.2.8.2.1 |
qbSysRptEntryAn entry in the Quantum Bridge qbSysReportTable. Every entry contains information related to a particular report QbSysRptEntry .1.3.6.1.4.1.4323.2.8.2.1.1 |
qbSysRptIdThe requested report identifier INTEGER .1.3.6.1.4.1.4323.2.8.2.1.1.1 |
qbSysAidThe system aid Unsigned32 .1.3.6.1.4.1.4323.2.8.2.1.1.2 |
qbSysArg1Argument needed to pass to report from climgrro INTEGER .1.3.6.1.4.1.4323.2.8.2.1.1.3 |
qbSysArg2Argument needed to pass to report from climgrro INTEGER .1.3.6.1.4.1.4323.2.8.2.1.1.4 |
qbSysArg3Argument needed to pass to report from climgrro INTEGER .1.3.6.1.4.1.4323.2.8.2.1.1.5 |
qbSysArg4Argument needed to pass to report from climgrro INTEGER .1.3.6.1.4.1.4323.2.8.2.1.1.6 |
qbSysArg5Argument needed to pass to report from climgrro INTEGER .1.3.6.1.4.1.4323.2.8.2.1.1.7 |
qbSysRptSizeThe size of collected report in bytes.ro INTEGER UNITS "bytes" .1.3.6.1.4.1.4323.2.8.2.1.1.8 |
qbSysRptThe location of gathered data. This is a memory address where gathered report data is locatedro INTEGER .1.3.6.1.4.1.4323.2.8.2.1.1.9 |
qbSysRptConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4323.2.8.3 |
qbSysRptCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.4323.2.8.3.1 |
qbSysRptComplianceThe compliance statement for all agents that support this MIB. A compliant agent implements all objects defined in this MIB. Unknown .1.3.6.1.4.1.4323.2.8.3.1.1 |
qbSysRptGroups OBJECT IDENTIFIER .1.3.6.1.4.1.4323.2.8.3.2 |
qbSysRptAllGroupThe set of all accessible objects in this MIB. Unknown .1.3.6.1.4.1.4323.2.8.3.2.1 |
More MIBs from Quantum Bridge
Browse all Quantum BridgeMIBs →SNMP MIB module
The QB-ATM-MIB extends standard ATM management capabilities to monitor and control ATM link parameters on Quantum Bridge hardware, specifically exposing vendor-specific objects and counters not defined in the IETF standard ATM-MIB. This module enables granular visibility into ATM interface states, traffic statistics, and error conditions unique to the Quantum Bridge platform.
SNMP MIB module
The QB-PVC-MIB facilitates the monitoring and configuration of Permanent Virtual Circuit (PVC) parameters, including status, traffic counters, and provisioning attributes, specifically within Quantum bridge networking devices. This module enables network administrators to track PVC session states and performance metrics essential for maintaining Layer 2 virtual circuit integrity.
The QB-VT15-MIB enables the provisioning and management of VT1.5/VC12 link parameters specifically within Quantum Bridge devices. This module facilitates the configuration of virtual tributary multiplexing attributes required for synchronous optical networking (SONET/SDH) transport.
The QB-VLAN-MGMT-MIB enables SNMP-based provisioning and monitoring of QB proprietary VLANs by exposing policing and thresholding metrics for administrator-defined traffic policies. It facilitates the retrieval of operational status and configuration parameters specific to QB's VLAN management capabilities.