QB-QOS-MGMT-MIB
The QB-QOS-MGMT-MIB provides SNMP management access to QB proprietary Quality of Service policies, specifically enabling the monitoring and configuration of interface bandwidth policing and thresholding mechanisms. This module allows administrators to define and track traffic shaping rules that enforce bandwidth allocation limits based on defined administrative policies.
Imported Objects
Objects
19 total| Object Name |
|---|
qbQosMIBThis module defines objects for the management of QB's proprietary QOS capability. This capability is based on Policing and Thresholding. The purpose of the QB Quality of Service (qos) function is to share access to an interface's bandwidth based on policies set up by the administrator. MODULE-IDENTITY .1.3.6.1.4.1.4323.2.14 |
qbQosObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4323.2.14.1 |
qbQosIfConfGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4323.2.14.1.1 |
qbQosIfConfTableLastUpdateThe value of sysUpTime at the time of the last creation, deletion or modification of an entry in the qbQosIfConfTable. If the number of entries has been unchanged since the last re-initialization of the agent, then this object contains a zero value.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.4323.2.14.1.1.1 |
qbQosIfConfTableThis table provides statistics for OAS300 Ethernet switching ports. Note that the table does not contain information about IOT ethernet ports. SEQUENCE OF QbQosIfConfEntry .1.3.6.1.4.1.4323.2.14.1.1.2 |
qbQosIfConfEntryConfiguration information about a single ethernet switching port QbQosIfConfEntry .1.3.6.1.4.1.4323.2.14.1.1.2.1 |
qbQosIfConfPolicingAdminStatusThe object is used to enable or disable policing policy on a given port.rw Enumeration .1.3.6.1.4.1.4323.2.14.1.1.2.1.1 |
qbQosIfStatTableThis table provides statistics for OAS300 Ethernet switching ports. Note that the table does not contain information about IOT ethernet ports. SEQUENCE OF QbQosIfStatEntry .1.3.6.1.4.1.4323.2.14.1.2 |
qbQosIfStatEntryStatistics about a single ethernet switching port QbQosIfStatEntry .1.3.6.1.4.1.4323.2.14.1.2.1 |
qbQosIfStatDiscPktsA count of the number of packets discarded for this interface due to policing on this interface.ro Counter32 .1.3.6.1.4.1.4323.2.14.1.2.1.1 |
qbQosIfStatUpThreshDiscPktsA count of the number of upstream packets discarded for this interface due to thresholding on this interface.ro Counter32 .1.3.6.1.4.1.4323.2.14.1.2.1.2 |
qbQosIfStatDownThreshDiscPktsA count of the number of downstream packets discarded for this interface due to thresholding on this interface.ro Counter32 .1.3.6.1.4.1.4323.2.14.1.2.1.3 |
qbQosNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.4323.2.14.2 |
qbQosNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.4323.2.14.2.0 |
qbQosConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4323.2.14.3 |
qbQosCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.4323.2.14.3.1 |
qbQosComplianceThe compliance statement for all agents that support this MIB. A compliant agent implements all objects defined in this MIB. Unknown .1.3.6.1.4.1.4323.2.14.3.1.1 |
qbQosGroups OBJECT IDENTIFIER .1.3.6.1.4.1.4323.2.14.3.2 |
qbQosGroupInfoThe set of all accessible objects in this MIB. Unknown .1.3.6.1.4.1.4323.2.14.3.2.1 |
More MIBs from Quantum Bridge
Browse all Quantum BridgeMIBs →SNMP MIB module
The QB-ATM-MIB extends standard ATM management capabilities to monitor and control ATM link parameters on Quantum Bridge hardware, specifically exposing vendor-specific objects and counters not defined in the IETF standard ATM-MIB. This module enables granular visibility into ATM interface states, traffic statistics, and error conditions unique to the Quantum Bridge platform.
SNMP MIB module
The QB-PVC-MIB facilitates the monitoring and configuration of Permanent Virtual Circuit (PVC) parameters, including status, traffic counters, and provisioning attributes, specifically within Quantum bridge networking devices. This module enables network administrators to track PVC session states and performance metrics essential for maintaining Layer 2 virtual circuit integrity.
The QB-VT15-MIB enables the provisioning and management of VT1.5/VC12 link parameters specifically within Quantum Bridge devices. This module facilitates the configuration of virtual tributary multiplexing attributes required for synchronous optical networking (SONET/SDH) transport.
The QB-VLAN-MGMT-MIB enables SNMP-based provisioning and monitoring of QB proprietary VLANs by exposing policing and thresholding metrics for administrator-defined traffic policies. It facilitates the retrieval of operational status and configuration parameters specific to QB's VLAN management capabilities.