QB-DS1-MIB

This module defines additional objects for management of DS1 links in Quantum Bridge devices, above and beyond what is defined in the standard DS1 mib, and proposed drafts.

Main OID:

qbDs1MIB.1.3.6.1.4.1.4323.2.10

Objects

Active

Status

Dependencies

Imported Objects

Objects

12 total

Object Name	Syntax	OID
qbDs1MIBThis module defines additional objects for management of DS1 links in Quantum Bridge devices, above and beyond what is defined in the standard DS1 mib, and proposed drafts. MODULE-IDENTITY `.1.3.6.1.4.1.4323.2.10`	MODULE-IDENTITY	`.1.3.6.1.4.1.4323.2.10`
qbDs1Objects OBJECT IDENTIFIER `.1.3.6.1.4.1.4323.2.10.1`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.4323.2.10.1`
qbDs1Tables OBJECT IDENTIFIER `.1.3.6.1.4.1.4323.2.10.2`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.4323.2.10.2`
qbDsx1ConfigTableThe Quantum Bridge DS1 Config table contains extensions to the DS1 Config table. SEQUENCE OF QbDsx1ConfigEntry `.1.3.6.1.4.1.4323.2.10.2.1`	SEQUENCE OF QbDsx1ConfigEntry	`.1.3.6.1.4.1.4323.2.10.2.1`
qbDsx1ConfigEntryAn entry in the Quantum Build DS1 Config table. QbDsx1ConfigEntry `.1.3.6.1.4.1.4323.2.10.2.1.1`	QbDsx1ConfigEntry	`.1.3.6.1.4.1.4323.2.10.2.1.1`
qbdsx1ClockModeDefine if DSx/Ex service clocking mode.rw Enumeration `.1.3.6.1.4.1.4323.2.10.2.1.1.1`	Enumeration	`.1.3.6.1.4.1.4323.2.10.2.1.1.1`
qbDsx1StatTableThe Quantum Bridge DS1 Config table contains extensions to the DS1 Config table. SEQUENCE OF QbDsx1StatEntry `.1.3.6.1.4.1.4323.2.10.2.2`	SEQUENCE OF QbDsx1StatEntry	`.1.3.6.1.4.1.4323.2.10.2.2`
qbDsx1StatEnryAn entry in the Quantum Build DS1 Config table. QbDsx1StatEntry `.1.3.6.1.4.1.4323.2.10.2.2.1`	QbDsx1StatEntry	`.1.3.6.1.4.1.4323.2.10.2.2.1`
qbDsx1StatBPVsThe number of Bipolar Violations.ro Counter32 `.1.3.6.1.4.1.4323.2.10.2.2.1.1`	Counter32	`.1.3.6.1.4.1.4323.2.10.2.2.1.1`
qbDs1Conformance OBJECT IDENTIFIER `.1.3.6.1.4.1.4323.2.10.3`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.4323.2.10.3`
qbDs1Compliances OBJECT IDENTIFIER `.1.3.6.1.4.1.4323.2.10.3.1`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.4323.2.10.3.1`
qbDs1Groups OBJECT IDENTIFIER `.1.3.6.1.4.1.4323.2.10.3.2`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.4323.2.10.3.2`

More MIBs from Quantum Bridge

Browse all Quantum BridgeMIBs →

QBSYS-SYSTEM-MIB

SNMP MIB module

268 objects→

QB-ATM-MIB

The QB-ATM-MIB extends standard ATM management capabilities to monitor and control ATM link parameters on Quantum Bridge hardware, specifically exposing vendor-specific objects and counters not defined in the IETF standard ATM-MIB. This module enables granular visibility into ATM interface states, traffic statistics, and error conditions unique to the Quantum Bridge platform.

SNMP MIB module

The QB-PVC-MIB facilitates the monitoring and configuration of Permanent Virtual Circuit (PVC) parameters, including status, traffic counters, and provisioning attributes, specifically within Quantum bridge networking devices. This module enables network administrators to track PVC session states and performance metrics essential for maintaining Layer 2 virtual circuit integrity.

73 objects→

QB-VT15-MIB

The QB-VT15-MIB enables the provisioning and management of VT1.5/VC12 link parameters specifically within Quantum Bridge devices. This module facilitates the configuration of virtual tributary multiplexing attributes required for synchronous optical networking (SONET/SDH) transport.

60 objects→

QB-VLAN-MGMT-MIB

The QB-VLAN-MGMT-MIB enables SNMP-based provisioning and monitoring of QB proprietary VLANs by exposing policing and thresholding metrics for administrator-defined traffic policies. It facilitates the retrieval of operational status and configuration parameters specific to QB's VLAN management capabilities.

42 objects→