PT3080-MIB
AI MIB Summary
The PT3080-MIB module enables SNMP-based monitoring and management of Protelevision Technologies PT3080 DVB-T/H modulators, specifically tracking digital broadcast transmission parameters such as signal power, modulation error ratio (MER), bit error rate (BER), and carrier status. This MIB facilitates the collection of performance counters and alarm states required to maintain the integrity of terrestrial digital television signal distribution.
This is the MIB file of PT3080 DVB-T/H Modulator. Copyright (c) 2008-2015 Protelevision Technologies A/S. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included.
Main OID:
pt3080.1.3.6.1.4.1.18086.3080
986
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
986 total| Object Name |
|---|
pt3080This is the MIB file of PT3080 DVB-T/H Modulator. Copyright (c) 2008-2015 Protelevision Technologies A/S. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. MODULE-IDENTITY .1.3.6.1.4.1.18086.3080 |
pt3080System OBJECT IDENTIFIER .1.3.6.1.4.1.18086.3080.1 |
pt3080SystemInstrumentKUThe instrument serial number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.1.1 |
pt3080SystemInstrumentTypeThe product type designation.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.1.2 |
pt3080SystemInstrumentSWRevThe instrument Software Revision currently running.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.1.3 |
pt3080SystemInstrumentBootLoaderRevThe instrument Bootloader Software Revision.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.1.4 |
pt3080SystemInstrumentKernelRevThe instrument O/S Kernel Version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.1.5 |
pt3080SystemInstrumentOptionsThe options installed on this instrument.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.1.6 |
pt3080SystemInstrumentFW1RevThe instrument FW1 revisionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.1.7 |
pt3080SystemInstrumentFW1RevBLThe instrument FW1 BL revisionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.1.8 |
pt3080SystemInstrumentFW2RevThe instrument FW2 revisionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.1.9 |
pt3080SystemInstrumentFW2RevBLThe instrument FW2 BL revisionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.1.10 |
pt3080SystemInstrumentFW3RevThe instrument FW3 revisionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.1.11 |
pt3080SystemInstrumentFW4RevThe instrument FW4 revisionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.1.12 |
pt3080SystemInstrumentPCBRevThe instrument PCB revisionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.1.13 |
pt3080SystemInstrumentCalibrationRevThe instrument Calibration revisionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.1.14 |
pt3080SystemInstrumentCalibrationDateThe instrument Calibration datero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.1.15 |
pt3080SystemRebootForce a reboot of the device on the designated image now.rw Enumeration .1.3.6.1.4.1.18086.3080.1.16 |
pt3080SystemRebootDefaultConfigRestore all parameters to factory default and reboot the device on the same image.rw Enumeration .1.3.6.1.4.1.18086.3080.1.19 |
pt3080SystemDateTimeSyncThe method used to synchronize system RTC. Mode auto means use gps if available else ntp else manual.rw Enumeration .1.3.6.1.4.1.18086.3080.1.20 |
pt3080SystemTimezoneThe Time Zone used for displaying Data and Time.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.1.21 |
pt3080SystemDateTimeThe current date/time in local timezone of the device. Format is YYYY MM DD HH MM SS.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.1.22 |
pt3080SystemCurrentImageThe flash Image the device is currently booted from.ro Integer32 .1.3.6.1.4.1.18086.3080.1.23 |
pt3080SystemImage0VersionThe image 0 version string.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.1.24 |
pt3080SystemImage0InstalledDateThe date and time image 0 was installed.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.1.25 |
pt3080SystemImage1versionThe image 1 version string.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.1.26 |
pt3080SystemImage1InstalledDateThe date and time image 0 was installed.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.1.27 |
pt3080SystemServiceLEDControl the Service LED on frontpanel.rw Enumeration .1.3.6.1.4.1.18086.3080.1.28 |
pt3080SystemTypeThe system type to start in on next reboot.rw Enumeration .1.3.6.1.4.1.18086.3080.1.30 |
pt3080SystemDateTimeSyncActualThe actual method used to synchronize system RTC.ro Enumeration .1.3.6.1.4.1.18086.3080.1.31 |
pt3080SystemModulationStandardThe Modulation Standard to start in on next reboot.rw Enumeration .1.3.6.1.4.1.18086.3080.1.32 |
pt3080SystemLanguageControls which language is used on web and facia. Change requires reboot.rw Enumeration .1.3.6.1.4.1.18086.3080.1.33 |
pt3080SystemOperationOnTimeNumber of seconds this unit has been turned on since production.ro Integer32 UNITS "1 secs" .1.3.6.1.4.1.18086.3080.1.34 |
pt3080SystemOperationOnAirTimeNumber of seconds this unit has been unmuted since production.ro Integer32 UNITS "1 secs" .1.3.6.1.4.1.18086.3080.1.35 |
pt3080SystemOperationNumberOfBootsNumber of times this unit has been booted since last factory default restore.ro Integer32 .1.3.6.1.4.1.18086.3080.1.36 |
pt3080SystemBackplaneidID of the backplane the device is plugged intoro Integer32 .1.3.6.1.4.1.18086.3080.1.40 |
pt3080SystemBackplaneIdRawRaw ID of the backplane the device is plugged intoro Integer32 .1.3.6.1.4.1.18086.3080.1.41 |
pt3080SystemBackplaneIdPcbPCB version of the backplane the device is plugged intoro Integer32 .1.3.6.1.4.1.18086.3080.1.42 |
pt3080SystemBackplaneIdCableOptionsCable options of the backplane the device is plugged intoro Integer32 .1.3.6.1.4.1.18086.3080.1.43 |
pt3080SystemBackplaneIdMAnufManufacture ID of the backplane the device is plugged intoro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.1.44 |
pt3080SystemBackplaneCalibrationDateCalibration date of the backplane the device is plugged intoro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.1.45 |
pt3080SystemBackplaneCalibrationSwCalibration SW version of the backplane the device is plugged intoro Integer32 .1.3.6.1.4.1.18086.3080.1.46 |
pt3080SystemBackplaneIdPartlistPartlist version of the backplane the device is plugged intoro Integer32 .1.3.6.1.4.1.18086.3080.1.47 |
pt3080SystemScheduledActionTableThis table contains the scheduled actions SEQUENCE OF Pt3080SystemScheduledActionEntry .1.3.6.1.4.1.18086.3080.1.50 |
pt3080SystemScheduledActionEntryAn entry for the scheduled action Pt3080SystemScheduledActionEntry .1.3.6.1.4.1.18086.3080.1.50.1 |
pt3080SystemScheduledActionIDUnique ID for this scheduled action entry Integer32 ( 1 .. 10 ) .1.3.6.1.4.1.18086.3080.1.50.1.1 |
pt3080SystemScheduledActionRecurrenceThe interval at which this scheduled action entry will be executedrw Enumeration .1.3.6.1.4.1.18086.3080.1.50.1.2 |
pt3080SystemScheduledActionHourThe recurrence hour used when pt3080SystemScheduledActionRecurrence is once, hourly, dayly, weekly and monthly.rw Integer32 ( 0 .. 23 ) .1.3.6.1.4.1.18086.3080.1.50.1.3 |
pt3080SystemScheduledActionMinuteThe recurrence minute used when pt3080SystemScheduledActionRecurrence is once, hourly, dayly, weekly and monthly.rw Integer32 ( 0 .. 59 ) .1.3.6.1.4.1.18086.3080.1.50.1.4 |
pt3080SystemScheduledActionWeekdayThe recurrence weekday used when pt3080SystemScheduledActionRecurrence is weekly.rw Enumeration .1.3.6.1.4.1.18086.3080.1.50.1.5 |
pt3080SystemScheduledActionMonthDayThe recurrence day of the monthe used when pt3080SystemScheduledActionRecurrence is monthly.rw Integer32 ( 1 .. 31 ) .1.3.6.1.4.1.18086.3080.1.50.1.6 |
pt3080SystemScheduledActionDateThe recurrence date used when pt3080SystemScheduledActionRecurrence is once. The format is dd/mm/yyyy.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.1.50.1.7 |
pt3080SystemScheduledActionRandomDelayAn extra random delay added before the action for this entry is executed. A setting of x means that a random delay between 0 and x seconds are added.rw Integer32 ( 0 .. 600 ) UNITS "secs" .1.3.6.1.4.1.18086.3080.1.50.1.8 |
pt3080SystemScheduledActionActionThe action for this entry is executedrw Enumeration .1.3.6.1.4.1.18086.3080.1.50.1.9 |
pt3080SystemScheduledActionRepeaterModeThe new repeater mode to change to when pt3080SystemScheduledActionAction of type repeatermode is executedrw Enumeration .1.3.6.1.4.1.18086.3080.1.50.1.10 |
pt3080SystemScheduledActionPresetNoThe preset to load when pt3080SystemScheduledActionAction of type preset is executedrw Enumeration .1.3.6.1.4.1.18086.3080.1.50.1.11 |
pt3080SystemScheduledActionRebootImageThe image to reboot to when pt3080SystemScheduledActionAction of type reboot is executedrw Enumeration .1.3.6.1.4.1.18086.3080.1.50.1.12 |
pt3080SystemScheduledActionRebootSystemTypeThe system type to reboot to when pt3080SystemScheduledActionAction of type reboot is executedrw Enumeration .1.3.6.1.4.1.18086.3080.1.50.1.13 |
pt3080SystemScheduledActionMuteThe mute mode to change into when pt3080SystemScheduledActionAction of type mute is executedrw Enumeration .1.3.6.1.4.1.18086.3080.1.50.1.14 |
pt3080SystemScheduledActionSWUpgradeProtocolThe protocol to use into when pt3080SystemScheduledActionAction of type swupgrade(3) is executedrw Enumeration .1.3.6.1.4.1.18086.3080.1.50.1.15 |
pt3080SystemScheduledActionSWUpgradeUsernameThe username to use into when pt3080SystemScheduledActionAction of type swupgrade(3) is executedrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.1.50.1.16 |
pt3080SystemScheduledActionSWUpgradePasswordThe password to use into when pt3080SystemScheduledActionAction of type swupgrade(3) is executedrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.1.50.1.17 |
pt3080SystemScheduledActionSWUpgradeImageServerThe server name to use into when pt3080SystemScheduledActionAction of type swupgrade(3) is executedrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.1.50.1.18 |
pt3080SystemScheduledActionSWUpgradeImagePathThe image path name to use into when pt3080SystemScheduledActionAction of type swupgrade(3) is executedrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.1.50.1.19 |
pt3080Mode OBJECT IDENTIFIER .1.3.6.1.4.1.18086.3080.2 |
pt3080ModeNetworkNetwork mode multi-frequency-network or single-frequency-networkrw Enumeration .1.3.6.1.4.1.18086.3080.2.1 |
pt3080ModeHierarchyHierarchy mode. Cannot be set if pt3080ModeMipControl is on(1).rw Enumeration .1.3.6.1.4.1.18086.3080.2.2 |
pt3080ModeifftIFFT 2k, 4k or 8k mode. Cannot be set if pt3080ModeMipControl is on(1).rw Enumeration .1.3.6.1.4.1.18086.3080.2.3 |
pt3080ModeCodeRateHighPrioHigh Priority Code Rate. Cannot be set if pt3080ModeMipControl is on(1).rw Enumeration .1.3.6.1.4.1.18086.3080.2.4 |
pt3080ModeCodeRateLowPrioLow Priority Code Rate. Cannot be set if pt3080ModeMipControl is on(1).rw Enumeration .1.3.6.1.4.1.18086.3080.2.5 |
pt3080ModeConstellationIf QPSK is selected and Hierarchical is <> NONE, then Hierarchical will be forced to NONE. Cannot be set if pt3080ModeMipControl is on(1).rw Enumeration .1.3.6.1.4.1.18086.3080.2.6 |
pt3080ModeGuardIntervalGuard Interval. Cannot be set if pt3080ModeMipControl is on(1).rw Enumeration .1.3.6.1.4.1.18086.3080.2.7 |
pt3080ModeCellIDSets the Cell ID value. Cannot be set if pt3080ModeMipControl is on(1).rw Integer32 ( 0 .. 65535 ) .1.3.6.1.4.1.18086.3080.2.8 |
pt3080ModeEnableCellIDEnables Cell ID in the TPS information. Cannot be set if pt3080ModeMipControl is on(1). Cannot be set to off(0) if pt3080ModeEnableDVBH is on(1)rw Enumeration .1.3.6.1.4.1.18086.3080.2.9 |
pt3080ModeDeepInterleaverEnables Deep Interleaver. Cannot be set if pt3080ModeMipControl is on(1).rw Enumeration .1.3.6.1.4.1.18086.3080.2.10 |
pt3080ModeEnableDVBHEnables DVB-H moderw Enumeration .1.3.6.1.4.1.18086.3080.2.11 |
pt3080ModeMpeFecLowPrioEnables MPE Fec Low Priority. Cannot be set if pt3080ModeMipControl is on(1).rw Enumeration .1.3.6.1.4.1.18086.3080.2.12 |
pt3080ModeMpeFecHighPrioEnables MPE Fec High Priority. Cannot be set if pt3080ModeMipControl is on(1).rw Enumeration .1.3.6.1.4.1.18086.3080.2.13 |
pt3080ModeTimeSlicingLowPrioEnables timeslicing High Priority. Cannot be set if pt3080ModeMipControl is on(1).rw Enumeration .1.3.6.1.4.1.18086.3080.2.14 |
pt3080ModeTimeSlicingHighPrioEnables timeslicing High Priority. Cannot be set if pt3080ModeMipControl is on(1).rw Enumeration .1.3.6.1.4.1.18086.3080.2.15 |
pt3080ModeSfnDelayOffsetSFN delay offsetrw Integer32 ( -9999999 .. 9999999 ) .1.3.6.1.4.1.18086.3080.2.16 |
pt3080ModeTxIdentThe transport stream control identifierrw Integer32 ( 0..65535 ) .1.3.6.1.4.1.18086.3080.2.17 |
pt3080ModeMipControlEnables transport stream control of modulatorrw Enumeration .1.3.6.1.4.1.18086.3080.2.18 |
pt3080ModeMfnKeepNullPacketsEnables MFN mode keep null packets optionrw Enumeration .1.3.6.1.4.1.18086.3080.2.19 |
pt3080ModeNetworkDelayHPCurrent network delay of HP TSro Integer32 UNITS "100ns" .1.3.6.1.4.1.18086.3080.2.20 |
pt3080ModeNetworkDelayMinHPMinimum network delay of HP TS seen since last resetro Integer32 UNITS "100ns" .1.3.6.1.4.1.18086.3080.2.21 |
pt3080ModeNetworkDelayMaxHPMaximum network delay of HP TS seen since last resetro Integer32 UNITS "100ns" .1.3.6.1.4.1.18086.3080.2.22 |
pt3080ModeMaxNetworkDelayHPMaximum allowed network delay, as received from MIPro Integer32 UNITS "100ns" .1.3.6.1.4.1.18086.3080.2.23 |
pt3080ModeNetworkDelayMarginHPDifference between Actual Network Delay and Max. Allowed Network Delayro Integer32 UNITS "100ns" .1.3.6.1.4.1.18086.3080.2.24 |
pt3080ModeNetworkDelayLPCurrent network delay of LP TSro Integer32 UNITS "100ns" .1.3.6.1.4.1.18086.3080.2.25 |
pt3080ModeNetworkDelayMinLPMinimum network delay of LP TS seen since last resetro Integer32 UNITS "100ns" .1.3.6.1.4.1.18086.3080.2.26 |
pt3080ModeNetworkDelayMaxLPMaximum network delay of LP TS seen since last resetro Integer32 UNITS "100ns" .1.3.6.1.4.1.18086.3080.2.27 |
pt3080ModeMaxNetworkDelayLPMaximum allowed network delay, as received from MIPro Integer32 UNITS "100ns" .1.3.6.1.4.1.18086.3080.2.28 |
pt3080ModeNetworkDelayMarginLPDifference between Actual Network Delay and Max. Allowed Network Delayro Integer32 UNITS "100ns" .1.3.6.1.4.1.18086.3080.2.29 |
pt3080ModeNetworkDelayResetReset network delay. Always reads back as noop(0)rw Enumeration .1.3.6.1.4.1.18086.3080.2.30 |
pt3080ModeDefaultMIPOutputPowerDefault MIP value for Output Power Level. Cannot be set if pt3080ModeMipControlOutputPower is on(1)rw Integer32 ( 0 .. 1000 ) UNITS "0.1 dBm" .1.3.6.1.4.1.18086.3080.2.31 |
pt3080ModeDefaultMIPOutputTimeOffsetDefault MIP value for Output SFN Time Offset. Cannot be set if pt3080ModeMipControlOutputTimeOffset is on(1)rw Integer32 ( -9999999 .. 9999999 ) UNITS "x100ns" .1.3.6.1.4.1.18086.3080.2.32 |
pt3080ModeDefaultMIPOutputCellIDDefault MIP value for Output Cell ID. Cannot be set if pt3080ModeMipControlOutputCellId is on(1)rw Integer32 ( 0 .. 65535 ) .1.3.6.1.4.1.18086.3080.2.33 |
pt3080ModeDefaultMIPOutputFreqOffsetDefault MIP value for Output frequency Offset. Cannot be set if pt3080ModeMipControlOutputFreqOffset is on(1)rw Integer32 ( -8388608 .. 8388607 ) UNITS "Hz" .1.3.6.1.4.1.18086.3080.2.34 |
pt3080ModeMIPMaxSFNDelayThe MIP value for SFN maximum delayro Integer32 UNITS "x100ns" .1.3.6.1.4.1.18086.3080.2.35 |
pt3080ModeMipControlOutputPowerEnables transport stream control of ModeDefaultMIPOutputPowerrw Enumeration .1.3.6.1.4.1.18086.3080.2.36 |
pt3080ModeMipControlOutputTimeOffsetEnables transport stream control of ModeDefaultMIPOutputTimeOffsetrw Enumeration .1.3.6.1.4.1.18086.3080.2.37 |
pt3080ModeMipControlOutputCellIdEnables transport stream control of ModeDefaultMIPOutputCellIdrw Enumeration .1.3.6.1.4.1.18086.3080.2.38 |
pt3080ModeMipControlOutputFreqOffsetEnables transport stream control of ModeDefaultMIPOutputFreqOffsetrw Enumeration .1.3.6.1.4.1.18086.3080.2.39 |
pt3080ModeListenBroadcastControl wheter to react on broadcast tx id.rw Enumeration .1.3.6.1.4.1.18086.3080.2.40 |
pt3080Input OBJECT IDENTIFIER .1.3.6.1.4.1.18086.3080.3 |
pt3080InputRefDirectionmonitors the Reference signal direction. state: - inputOutput[inputOutput_INPUT] - inputOutput[inputOutput_OUTPUT]rw Enumeration .1.3.6.1.4.1.18086.3080.3.1 |
pt3080InputRefSourceDefines the input reference synchronisation source. If the value AUTO is chosen, the source is chosen automatically between available sources. The order of choice is GPS->EXT10MHz->INT. If the value EXT is chosen, the external clock is chosen as source If the value INT is chosen, the internal clock is chosen as source. If the value GPS is chosen, the GNSS 1PPS clock is chosen as source.rw Enumeration .1.3.6.1.4.1.18086.3080.3.2 |
pt3080InputRef10MhzImpedanceDefines the external 10 MHz input reference synchronisation source impedance. The value is either 50O or high impedance.rw Enumeration .1.3.6.1.4.1.18086.3080.3.3 |
pt3080InputRef1PPSImpedanceDefines the external 1 PPS input reference synchronisation source impedance. The value is either 50ohm or high impedance.rw Enumeration .1.3.6.1.4.1.18086.3080.3.4 |
pt3080InputRef1PPSTrigSlopeDefines the trigger edge of the external 1PPS input reference clock. The value is either RISING or FALLING.rw Enumeration .1.3.6.1.4.1.18086.3080.3.5 |
pt3080InputRef1PPSTrigLevelDefines the trigger level of the external 1PPS input reference clockrw Integer32 ( 10 .. 16 ) UNITS "0.1 v" .1.3.6.1.4.1.18086.3080.3.6 |
pt3080InputRef10MhzHoldoverDelayDefines the external 10 MHz input reference synchronisation source impedance. The value is either 50O or high impedance.rw Integer32 ( 0 .. 172800 ) .1.3.6.1.4.1.18086.3080.3.7 |
pt3080InputRef10MhzHoldoverForeverThe holdover delay for input reference source 10MHz failure is foreverrw Enumeration .1.3.6.1.4.1.18086.3080.3.8 |
pt3080InputRef1PPSHoldoverDelayDefines the external 1 PPS input reference synchronisation source impedance. The value is either 50ohm or high impedance.rw Integer32 ( 0 .. 172800 ) .1.3.6.1.4.1.18086.3080.3.9 |
pt3080InputRef1PPSHoldoverForeverThe holdover delay for input reference source 1 pps failure is foreverrw Enumeration .1.3.6.1.4.1.18086.3080.3.10 |
pt3080InputRefStatusreturns the current input reference synchronisation source.ro Enumeration .1.3.6.1.4.1.18086.3080.3.11 |
pt3080InputASITSPrimarySourceThe TS-Primary input source connector selectedrw Enumeration .1.3.6.1.4.1.18086.3080.3.12 |
pt3080InputASITSSecondarySourceThe TS-Secondary input source connector selectedrw Enumeration .1.3.6.1.4.1.18086.3080.3.13 |
pt3080InputASIAutoRoutingPolicyThe policy to use for TS auto routingrw Enumeration .1.3.6.1.4.1.18086.3080.3.14 |
pt3080InputASIAutoRoutingDelayHp2LpThe delay before performing the actual substitution where TS-Primary -> TS-LP and TS-Secondary -> TS-HPrw Integer32 ( 0 .. 300 ) UNITS "1 secs" .1.3.6.1.4.1.18086.3080.3.15 |
pt3080InputASIAutoRoutingDelayLp2HpThe delay before performing the actual substitution where TS-Primary -> TS-HP and TS-Secondary -> TS-LPrw Integer32 ( 0 .. 300 ) UNITS "1 secs" .1.3.6.1.4.1.18086.3080.3.16 |
pt3080InputASIHoldoverTimeoutThe time ASI Holdover will be active, if seamless ASI switching is not possiblerw Integer32 ( 0 .. 3600 ) UNITS "1 secs" .1.3.6.1.4.1.18086.3080.3.17 |
pt3080InputTSPrimaryMaxPATDelayThe Max delay between the Program Association Table (PAT) on the incomming transport stream.rw Integer32 ( 10 .. 10000 ) UNITS "1 ms" .1.3.6.1.4.1.18086.3080.3.18 |
pt3080InputTSPrimaryMaxPATDelayEnableEnables TS switching if the Max delay between PAT table updates has been exceeded.rw Enumeration .1.3.6.1.4.1.18086.3080.3.19 |
pt3080InputTSPrimaryExpectedTSIDThe TS-ID value expected on the incoming TS stream.rw Integer32 ( 0 .. 65535 ) .1.3.6.1.4.1.18086.3080.3.20 |
pt3080InputTSPrimaryExpectedTSIDEnableEnables TS switching if the TS-ID is not the expected value.rw Enumeration .1.3.6.1.4.1.18086.3080.3.21 |
pt3080InputTSPrimaryExpectedNWIDThe NW-ID value expected on the incoming TS stream.rw Integer32 ( 0 .. 65535 ) .1.3.6.1.4.1.18086.3080.3.22 |
pt3080InputTSPrimaryExpectedNWIDEnableEnables TS switching if the NW-ID is not the expected value.rw Enumeration .1.3.6.1.4.1.18086.3080.3.23 |
pt3080InputTSPrimaryMaxStuffingrateThe expected stuffing rate on the incoming TS stream.rw Integer32 ( 0 .. 100 ) UNITS "1 %" .1.3.6.1.4.1.18086.3080.3.24 |
pt3080InputTSPrimaryMaxStuffingrateEnableEnables TS switching if the Stuffing rate is over the expected value.rw Enumeration .1.3.6.1.4.1.18086.3080.3.25 |
pt3080InputTSPrimaryMaxStsJitterThe Max STS jitter on the TS-Primaryrw Integer32 ( 0 .. 500 ) UNITS "100ns" .1.3.6.1.4.1.18086.3080.3.26 |
pt3080InputTSSecondaryMaxPATDelayThe Max delay between the Program Association Table (PAT) on the incomming transport stream.rw Integer32 ( 10 .. 10000 ) UNITS "1 ms" .1.3.6.1.4.1.18086.3080.3.27 |
pt3080InputTSSecondaryMaxPATDelayEnableEnables TS switching if the Max delay between PAT table updates has been exceeded.rw Enumeration .1.3.6.1.4.1.18086.3080.3.28 |
pt3080InputTSSecondaryExpectedTSIDThe TS-ID value expected on the incoming TS stream.rw Integer32 ( 0 .. 65535 ) .1.3.6.1.4.1.18086.3080.3.29 |
pt3080InputTSSecondaryExpectedTSIDEnableEnables TS switching if the TS-ID is not the expected value.rw Enumeration .1.3.6.1.4.1.18086.3080.3.30 |
pt3080InputTSSecondaryExpectedNWIDThe NW-ID value expected on the incoming TS stream.rw Integer32 ( 0 .. 65535 ) .1.3.6.1.4.1.18086.3080.3.31 |
pt3080InputTSSecondaryExpectedNWIDEnableEnables TS switching if the NW-ID is not the expected value.rw Enumeration .1.3.6.1.4.1.18086.3080.3.32 |
pt3080InputTSSecondaryMaxStuffingrateThe expected stuffing rate on the incoming TS stream.rw Integer32 ( 0 .. 100 ) UNITS "1 %" .1.3.6.1.4.1.18086.3080.3.33 |
pt3080InputTSSecondaryMaxStuffingrateEnableEnables TS switching if the Stuffing rate is over the expected value.rw Enumeration .1.3.6.1.4.1.18086.3080.3.34 |
pt3080InputTSSecondaryMaxStsJitterThe Max STS jitter on the TS-Secondaryrw Integer32 ( 0 .. 500 ) UNITS "100ns" .1.3.6.1.4.1.18086.3080.3.35 |
pt3080InputTSPrimaryStatusThe current state for TS-Primary. Unavailable means violation of alarms.ro Enumeration .1.3.6.1.4.1.18086.3080.3.36 |
pt3080InputTSSecondaryStatusThe current state for TS-Secondary. Unavailable means violation of alarms.ro Enumeration .1.3.6.1.4.1.18086.3080.3.37 |
pt3080InputTSHpThe input source currently On Air. (TS-HP)ro Enumeration .1.3.6.1.4.1.18086.3080.3.38 |
pt3080InputTSLpThe input source currently used as backup. (TS-LP)ro Enumeration .1.3.6.1.4.1.18086.3080.3.39 |
pt3080InputEffectiveAutoroutingPolicyReflects the effective ASI Autorouting Policyro Enumeration .1.3.6.1.4.1.18086.3080.3.40 |
pt3080InputTSHpBitrateCurrent bitrate for On Air TS. (TS-HP)ro Integer32 UNITS "Kb/s" .1.3.6.1.4.1.18086.3080.3.41 |
pt3080InputTSHpPacketsBufferedCurrent number of packets buffered for On Air TS (TS-HP)ro Integer32 UNITS "packets" .1.3.6.1.4.1.18086.3080.3.42 |
pt3080InputTSHpPacketSizeCurrent size of packets for On Air TS (TS-HP)ro Integer32 UNITS "bytes" .1.3.6.1.4.1.18086.3080.3.43 |
pt3080InputTSHpStuffingrateCurrent NULL stuffing as a percentage of the current bitrate for On Air TS (TS-HP)ro Integer32 UNITS "Kb/s" .1.3.6.1.4.1.18086.3080.3.44 |
pt3080InputTSHpTSIDCurrent Transport Stream ID for On Air TS. (TS-HP)ro Integer32 .1.3.6.1.4.1.18086.3080.3.45 |
pt3080InputTSHpNWIDCurrent Network ID for On Air TS. (TS-HP)ro Integer32 .1.3.6.1.4.1.18086.3080.3.46 |
pt3080InputTSLpBitrateCurrent bitrate for Backup TS. (TS-LP)ro Integer32 UNITS "Kb/s" .1.3.6.1.4.1.18086.3080.3.47 |
pt3080InputTSLpPacketsBufferedCurrent number of packets buffered for Backup TS. (TS-LP)ro Integer32 UNITS "packets" .1.3.6.1.4.1.18086.3080.3.48 |
pt3080InputTSLpPacketSizeCurrent size of packets for Backup TS. (TS-LP)ro Integer32 UNITS "bytes" .1.3.6.1.4.1.18086.3080.3.49 |
pt3080InputTSLpStuffingrateCurrent NULL stuffing as a percentage of the current bitrate for Backup TS. (TS-LP)ro Integer32 UNITS "Permille" .1.3.6.1.4.1.18086.3080.3.50 |
pt3080InputTSLpTSIDCurrent Transport Stream ID for Backup TS. (TS-LP)ro Integer32 .1.3.6.1.4.1.18086.3080.3.51 |
pt3080InputTSLpNWIDCurrent Network ID for Backup TS. (TS-LP)ro Integer32 .1.3.6.1.4.1.18086.3080.3.52 |
pt3080InputTSPrimaryStsJitterCurrent STS jitter on the TS-Primary.ro Integer32 UNITS "100ns" .1.3.6.1.4.1.18086.3080.3.53 |
pt3080InputTSPrimaryStsJitterMaxThe Maximum STS jitter value seen on the TS-Primaryro Integer32 UNITS "100ns" .1.3.6.1.4.1.18086.3080.3.54 |
pt3080InputTSPrimaryStsJitterMinThe minimum STS jitter value seen on the TS-Primaryro Integer32 UNITS "100ns" .1.3.6.1.4.1.18086.3080.3.55 |
pt3080InputTSPrimaryStsJitterResetReset the pt3080InputTSPrimaryStsJitterMax and pt3080InputTSPrimaryStsJitterMin valuesrw Enumeration .1.3.6.1.4.1.18086.3080.3.56 |
pt3080InputTSSecondaryStsJitterCurrent STS jitter on the TS-Secondaryro Integer32 UNITS "100ns" .1.3.6.1.4.1.18086.3080.3.57 |
pt3080InputTSSecondaryStsJitterMaxThe Maximum STS jitter value seen on the TS-Secondaryro Integer32 UNITS "100ns" .1.3.6.1.4.1.18086.3080.3.58 |
pt3080InputTSSecondaryStsJitterMinThe minimum STS jitter value seen on the TS-Secondaryro Integer32 UNITS "100ns" .1.3.6.1.4.1.18086.3080.3.59 |
pt3080InputTSSecondaryStsJitterResetReset the pt3080InputTSSecondaryStsJitterMax and pt3080InputTSSecondaryStsJitterMin valuesrw Enumeration .1.3.6.1.4.1.18086.3080.3.60 |
pt3080InputTSPrimaryMinDelaymarginThe minimum delay margin of the incoming TS stream.rw Integer32 ( 0 .. 1000 ) UNITS "1 ms" .1.3.6.1.4.1.18086.3080.3.64 |
pt3080InputTSPrimaryMinDelaymarginEnableEnables TS switching if the Minimum Delay margin is not according to the expected value.rw Enumeration .1.3.6.1.4.1.18086.3080.3.65 |
pt3080InputTSSecondaryMinDelaymarginThe minimum delay margin of the incoming TS stream.rw Integer32 ( 0 .. 1000 ) UNITS "1 ms" .1.3.6.1.4.1.18086.3080.3.66 |
pt3080InputTSSecondaryMinDelaymarginEnableEnables TS switching if the Minimum Delay margin is not according to the expected value.rw Enumeration .1.3.6.1.4.1.18086.3080.3.67 |
pt3080InputTSPrimaryMaxMissingmipThe maximum seconds of missing mip information from the incoming TS stream.rw Integer32 ( 1 .. 255 ) UNITS "1 secs" .1.3.6.1.4.1.18086.3080.3.68 |
pt3080InputTSPrimaryMaxMissingmipEnableEnables TS switching if the Maximum missing mip is not according to the expected value.rw Enumeration .1.3.6.1.4.1.18086.3080.3.69 |
pt3080InputTSSecondaryMaxMissingmipThe maximum seconds of missing mip information from the incoming TS stream.rw Integer32 ( 1 .. 255 ) UNITS "1 secs" .1.3.6.1.4.1.18086.3080.3.73 |
pt3080InputTSSecondaryMaxMissingmipEnableEnables TS switching if the Maximum missing mip is not according to the expected value.rw Enumeration .1.3.6.1.4.1.18086.3080.3.74 |
pt3080InputRefDevTypeType of TCXO/OCXOro Enumeration .1.3.6.1.4.1.18086.3080.3.90 |
pt3080InputRefCalDateCalibration Datero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.3.91 |
pt3080InputRefCalVerCalibration SW Versionro Integer32 .1.3.6.1.4.1.18086.3080.3.92 |
pt3080Output OBJECT IDENTIFIER .1.3.6.1.4.1.18086.3080.4 |
pt3080OutputModeControl RF output moderw Enumeration .1.3.6.1.4.1.18086.3080.4.1 |
pt3080OutputRfFrequencyOutput RF frequencyrw Integer32 ( 30000000 .. 860000000 ) UNITS "1 Hz" .1.3.6.1.4.1.18086.3080.4.2 |
pt3080OutputRfLevelSets the output level in 0.01dB steps, 0dB is +6dBm on IF, 0dBm on RFrw Integer32 ( -1000 .. 1000 ) UNITS "0.01 dBm" .1.3.6.1.4.1.18086.3080.4.3 |
pt3080OutputBandwidthOutput Bandwidthrw Integer32 ( 5 .. 8 ) UNITS "MHz" .1.3.6.1.4.1.18086.3080.4.4 |
pt3080OutputChannelChannel settingsrw Integer32 ( 21 .. 69 ) .1.3.6.1.4.1.18086.3080.4.5 |
pt3080OutputSynchronizedThe values of pt3080OutputRfFrequency, pt3080OutputBandwidth and pt3080OutputChannel are synchronized aaccording to freq = (bw * channel) + 306000000.ro Enumeration .1.3.6.1.4.1.18086.3080.4.6 |
pt3080OutputMuteOutput mute. When set the mute reason UserRequest is ORed into the mute reason set. When read it is the logical OR of all mute reasonsrw Enumeration .1.3.6.1.4.1.18086.3080.4.7 |
pt3080OutputPolarityControl RF output polarityrw Enumeration .1.3.6.1.4.1.18086.3080.4.8 |
pt3080OutputPowerLevelThe desired output power level.rw Integer32 ( 280 .. 490 ) UNITS "0.1 dBm" .1.3.6.1.4.1.18086.3080.4.9 |
pt3080OutputRfFrequencyOffsetOutput RF frequency offsetrw Integer32 ( -8388608 .. 8388607 ) UNITS "1 Hz" .1.3.6.1.4.1.18086.3080.4.10 |
pt3080OutputIfEnableControl IF outputrw Enumeration .1.3.6.1.4.1.18086.3080.4.13 |
pt3080OutputIfFrequencyOutput Frequency for I/Frw Integer32 ( 35150000 .. 37150000 ) UNITS "1 Hz" .1.3.6.1.4.1.18086.3080.4.14 |
pt3080OutputIfPolarityControl IF output polarityrw Enumeration .1.3.6.1.4.1.18086.3080.4.15 |
pt3080OutputIfLevelOutput Level for I/Frw Integer32 ( -1000 .. 0 ) UNITS "0.01 dBm" .1.3.6.1.4.1.18086.3080.4.16 |
pt3080OutputEffectiveLevelEffective RF Output Levelro Integer32 UNITS "0.01 dBm" .1.3.6.1.4.1.18086.3080.4.17 |
pt3080OutputActualLevelActual RF Output Levelro Integer32 UNITS "0.01 dBm" .1.3.6.1.4.1.18086.3080.4.18 |
pt3080OutputRfDetectedActualLevelDetected Output Level for RFro Integer32 UNITS "0.01 dBm" .1.3.6.1.4.1.18086.3080.4.19 |
pt3080OutputRfDetectedLowerLevelLimitLimit to how much lower the detected RF output level can be than the configured level.rw Integer32 ( 2 .. 50 ) UNITS "0.1 dB" .1.3.6.1.4.1.18086.3080.4.20 |
pt3080OutputRfDetectedLowerLevelcontrolControls whether the lower limit for RF output level is enforced.rw Enumeration .1.3.6.1.4.1.18086.3080.4.21 |
pt3080OutputRfDetectedHigherLevelLimitLimit to how much higher the detected RF output level can be than the configured level.rw Integer32 ( 2 .. 50 ) UNITS "0.1 dB" .1.3.6.1.4.1.18086.3080.4.22 |
pt3080OutputRfDetectedHigherLevelcontrolControls whether the higher limit for RF output level is enforced.rw Enumeration .1.3.6.1.4.1.18086.3080.4.23 |
pt3080OutputRfAlcControlControls whether the ALC system is enabled or disabled.rw Enumeration .1.3.6.1.4.1.18086.3080.4.30 |
pt3080OutputRfAlcSenseControls which sense port is used by the ALC system if the ALC is enabled.rw Enumeration .1.3.6.1.4.1.18086.3080.4.31 |
pt3080OutputRfAlcSetpointPort1ALC setpoint for RF Sense Port 1rw Integer32 ( -11000 .. 11000 ) UNITS "0.01 dB" .1.3.6.1.4.1.18086.3080.4.32 |
pt3080OutputRfAlcSetpointPort2ALC setpoint for RF Sense Port 2rw Integer32 ( -11000 .. 11000 ) UNITS "0.01 dB" .1.3.6.1.4.1.18086.3080.4.33 |
pt3080OutputRfAlcStatusStatus for whether the ALC system is enabled or disabled.ro Enumeration .1.3.6.1.4.1.18086.3080.4.34 |
pt3080OutputRfAlcStatusInformationInformation on the state of the ALC system.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.4.35 |
pt3080OutputRfCableModeControl whether Cable Level loss compensation should be enabledrw Enumeration .1.3.6.1.4.1.18086.3080.4.50 |
pt3080OutputRfCableConstantLevelOffsetConstant level offset to add to RF Output level. Only used if mode is Constant.rw Integer32 ( -10000 .. 10000 ) UNITS "0.001 dBm" .1.3.6.1.4.1.18086.3080.4.51 |
pt3080OutputRfCableFrequencyLevelOffset0Frequency depedent level offset to add to RF Output level. Only used if mode is Automatic.rw Integer32 ( -10000 .. 10000 ) UNITS "0.001 dBm" .1.3.6.1.4.1.18086.3080.4.52 |
pt3080OutputRfCableFrequencyLevelOffset1Frequency depedent level offset to add to RF Output level. Only used if mode is Automatic.rw Integer32 ( -10000 .. 10000 ) UNITS "0.001 dBm" .1.3.6.1.4.1.18086.3080.4.53 |
pt3080OutputRfCableFrequencyLevelOffset2Frequency depedent level offset to add to RF Output level. Only used if mode is Automatic.rw Integer32 ( -10000 .. 10000 ) UNITS "0.001 dBm" .1.3.6.1.4.1.18086.3080.4.54 |
pt3080OutputRfCableFrequencyLevelOffset3Frequency depedent level offset to add to RF Output level. Only used if mode is Automatic.rw Integer32 ( -10000 .. 10000 ) UNITS "0.001 dBm" .1.3.6.1.4.1.18086.3080.4.55 |
pt3080OutputRfCableFrequencyLevelOffset4Frequency depedent level offset to add to RF Output level. Only used if mode is Automatic.rw Integer32 ( -10000 .. 10000 ) UNITS "0.001 dBm" .1.3.6.1.4.1.18086.3080.4.56 |
pt3080OutputRfCableFrequencyLevelOffset5Frequency depedent level offset to add to RF Output level. Only used if mode is Automatic.rw Integer32 ( -10000 .. 10000 ) UNITS "0.001 dBm" .1.3.6.1.4.1.18086.3080.4.57 |
pt3080Gps OBJECT IDENTIFIER .1.3.6.1.4.1.18086.3080.7 |
pt3080Gps1PPSStatusReturns the current locking state of the GPS system. The value LOCKED indicates that the GPS system is locked to a sufficient number of satellites to perform well. UNLOCKED indicates that it is not. For the GPS system to perform well at least 4 satellites must be visible with a proper signal to noise ratio.ro Enumeration .1.3.6.1.4.1.18086.3080.7.1 |
pt3080GpsVisibleSatellitesReturns the number of currently visible satellites via the built-in GPS receiver. A satellite is visible if at all detectable by the GPS system i.e. regardless of signal to noise ratio. Note that the upper value N can change with the launch of new satellites. For some time, however, the GPS system has had a total of 24 satellites.ro Integer32 .1.3.6.1.4.1.18086.3080.7.2 |
pt3080GpsTrackedSatellitesReturns the number of currently tracked satellites via the GPS receiver.ro Integer32 .1.3.6.1.4.1.18086.3080.7.3 |
pt3080GpsBiasDefines the bias to be either on or off for the GPS antenna DC supply (5V or 3V DC). An active GPS antenna requires a power supply i.e. requires this parameter to set to ON.rw Enumeration .1.3.6.1.4.1.18086.3080.7.4 |
pt3080GpsLongtitudeReturns - as a string - the current longtitude derived from the received GPS signal(s). The string format is DDD MM SS C. according to the following: - DD denotes degrees in the intervals [0 .. 180]. MM and SS denote minutes/seconds in the interval [0 .. 59]. C denotes E, W (East, West).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.7.6 |
pt3080GpsLatitudeReturns - as a string - the current latitude derived from the received GPS signal(s). The string format is DD MM SS C. according to the following: - DD denotes degrees in the intervals [0 .. 90]. MM and SS denote minutes/seconds in the interval [0 .. 59]. C denotes N, S (North, South).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.7.7 |
pt3080GpsAltitudeReturns - as a string - the current altitude derived from the received GPS signal(s). The string format is HHHH.c;. according to the following: HHHH.c denotes the altitude in metres with one digit after the comma. The altitude can be negative.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.7.8 |
pt3080GpsVersionReturns the GPS chip firmware version as a string.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.7.9 |
pt3080GpsHoldoverTimeDefines the GPS holdover time. This value is ignored if the holdover forever (see below) is set to YES If the GPS locking is lost the system is allowed to continue operating for holdover time seconds using the internal GPS chip oscillator. If - when the holdover time interval expires - the GPS locking it still lost, the GPS operation will be maintained using external timing if present. If external timing is not present the GPS operation will be maintained using the internal motherboard oscillator.rw Integer32 ( 0 .. 172800 ) .1.3.6.1.4.1.18086.3080.7.10 |
pt3080GpsHoldoverForeverDefines whether the GPS system is allowed to operate infinitely (YES) following loss of GPS locking using the internal GPS chip oscillator or not (NO).In case NO is chosen the GPS holdover time applies.rw Enumeration .1.3.6.1.4.1.18086.3080.7.11 |
pt3080GpsCableDelayDefines the antenna cable compensation delay. If the GPS antenna is situated far away from the receiver itself the signal will be delayed and must be compensated.rw Integer32 ( -18125 .. 13750 ) UNITS "0.1 ns" .1.3.6.1.4.1.18086.3080.7.12 |
pt3080GpsStateReturns a string describing the GPS state. For informational purposes.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.7.13 |
pt3080GpsVisibleSatellitesSnrReturns the average signal to noise ratio of all visible satellites via the built-in GPS receiverro Integer32 UNITS "0.1 dBHz" .1.3.6.1.4.1.18086.3080.7.14 |
pt3080GpsbiasVoltageDefines the gps antenna bias voltage. An active GPS antenna requires a power supply of either 3V or 5V.rw Enumeration .1.3.6.1.4.1.18086.3080.7.15 |
pt3080GpsSatelliteSystemGPSControls whether GPS satellites are used to obtain position and timing information.rw Enumeration .1.3.6.1.4.1.18086.3080.7.16 |
pt3080GpsSatelliteSystemGLONASSControls whether GLONASS satellites are used to obtain position and timing information.rw Enumeration .1.3.6.1.4.1.18086.3080.7.17 |
pt3080GpsSatelliteSystemGALILEOControls whether GALILEO satellites are used to obtain position and timing information.rw Enumeration .1.3.6.1.4.1.18086.3080.7.18 |
pt3080GpsSatelliteSystemCOMPASSControls whether COMPASS satellites are used to obtain position and timing information.rw Enumeration .1.3.6.1.4.1.18086.3080.7.19 |
pt3080TSoIP OBJECT IDENTIFIER .1.3.6.1.4.1.18086.3080.10 |
pt3080TSoIPRx1SyncTimeoutSpecifies the maximum time accepted between received TS packages.rw Integer32 ( 16 .. 250 ) UNITS "1 ms" .1.3.6.1.4.1.18086.3080.10.9 |
pt3080TSoIPRx1MinumimLatencySpecifies the minimum time incoming data is buffered. The value configured might be modified by FEC row/column sized on the incoming data.rw Integer32 ( 0 .. 5000 ) UNITS "0.1 ms" .1.3.6.1.4.1.18086.3080.10.10 |
pt3080TSoIPRx1LanSelectSpecifies which virtual LAN interface to receive IP/UDP packets from.rw Enumeration .1.3.6.1.4.1.18086.3080.10.11 |
pt3080TSoIPRx1MulticastEnables the reception of Multicast IP/UDP packets with transport stream data to be forward into the modulator. If disabled, only unicast IP/UDP packets are considdered.rw Enumeration .1.3.6.1.4.1.18086.3080.10.12 |
pt3080TSoIPRx1ProtocolSelects which protocol to expect incoming packets to have.rw Enumeration .1.3.6.1.4.1.18086.3080.10.13 |
pt3080TSoIPRx1PortnumberSpecifies which UDP port number to receive IP/UDP packets from.rw Integer32 ( 1 .. 65535 ) .1.3.6.1.4.1.18086.3080.10.14 |
pt3080TSoIPRx1ReceiverEnableEnables the reception of IP/UDP packets with transport stream data to be forward into the modulator.rw Enumeration .1.3.6.1.4.1.18086.3080.10.15 |
pt3080TSoIPRx1PacketErrorRatioLimitSpecifies limit for the Packet Error Ratio. If the limit is exceeded and alarm is raised.rw Integer32 ( 0 .. 500 ) UNITS "0.1 %" .1.3.6.1.4.1.18086.3080.10.16 |
pt3080TSoIPRx1StatusThe current status of the receiver. Locked means minimum of 3 IP/UDP frames received per second.ro Enumeration .1.3.6.1.4.1.18086.3080.10.17 |
pt3080TSoIPRx1CurrentIPAddressThe current receive IP address for the TSoIP interface.ro IpAddress .1.3.6.1.4.1.18086.3080.10.18 |
pt3080TSoIPRx1SequenceErrorsThe number of sequence errors on this channel on the TSoIP interface.ro Integer32 .1.3.6.1.4.1.18086.3080.10.19 |
pt3080TSoIPRx1PacketErrorRatioShows the current error ratio of uncoming traffic for this UDP port.ro Integer32 UNITS "0.1 %" .1.3.6.1.4.1.18086.3080.10.20 |
pt3080TSoIPRx1LostIPFramesThe number of lost IP frames on the channel on the TSoIP interface. The sequence numbers of frames employed by the RTP protocol are used to determine this statistic.ro Integer32 .1.3.6.1.4.1.18086.3080.10.21 |
pt3080TSoIPRx1CorrectedIPFramesThe number of corrected IP frames (via FEC) on this cannel on the TSoIP interface.ro Integer32 .1.3.6.1.4.1.18086.3080.10.22 |
pt3080TSoIPRx1FecColumnThe curent FEC Column (L) number for this cannel on the TSoIP interface.ro Integer32 .1.3.6.1.4.1.18086.3080.10.23 |
pt3080TSoIPRx1FecRowThe curent FEC Row (D) number for this cannel on the TSoIP interface.ro Integer32 .1.3.6.1.4.1.18086.3080.10.24 |
pt3080TSoIPRx1PacketsPerFrameThe curent number of TS packets per IP frames on this cannel on the TSoIP interface.ro Integer32 .1.3.6.1.4.1.18086.3080.10.25 |
pt3080TSoIPRx1IpBitrateShows the current bitrate of uncoming traffic for this UDP port.ro Integer32 UNITS "0.001 Mbps" .1.3.6.1.4.1.18086.3080.10.26 |
pt3080TSoIPRx1QueueSizeThe curent queue size for this cannel on the TSoIP interface.ro Integer32 UNITS "1 Frames" .1.3.6.1.4.1.18086.3080.10.27 |
pt3080TSoIPRx1CurrentLatencyThe current latency incurrent by queue size on this channel on the TSoIP interface.ro Integer32 UNITS "0.1 ms" .1.3.6.1.4.1.18086.3080.10.28 |
pt3080TSoIPRx1TSPacketSizeThe curent size of TS packets on this cannel on the TSoIP interface. Usually 188 or 204.ro Integer32 .1.3.6.1.4.1.18086.3080.10.29 |
pt3080TSoIPRx1OverrunIPFramesThe number of IP frames lost on the channel on the TSoIP interface due to overrun. Overrun happens when the outgoing rate of the modulator is lower that the incoming rate of TSoIP data.ro Integer32 .1.3.6.1.4.1.18086.3080.10.30 |
pt3080TSoIPRx2SyncTimeoutSpecifies the maximum time accepted between received TS packages.rw Integer32 ( 16 .. 250 ) UNITS "1 ms" .1.3.6.1.4.1.18086.3080.10.39 |
pt3080TSoIPRx2MinumimLatencySpecifies the minimum time incoming data is buffered. The value configured might be modified by FEC row/column sized on the incoming data.rw Integer32 ( 0 .. 5000 ) UNITS "0.1 ms" .1.3.6.1.4.1.18086.3080.10.40 |
pt3080TSoIPRx2LanSelectSpecifies which virtual LAN interface to receive IP/UDP packets from.rw Enumeration .1.3.6.1.4.1.18086.3080.10.41 |
pt3080TSoIPRx2MulticastEnables the reception of Multicast IP/UDP packets with transport stream data to be forward into the modulator. If disabled, only unicast IP/UDP packets are considdered.rw Enumeration .1.3.6.1.4.1.18086.3080.10.42 |
pt3080TSoIPRx2ProtocolSelects which protocol to expect incoming packets to have.rw Enumeration .1.3.6.1.4.1.18086.3080.10.43 |
pt3080TSoIPRx2PortnumberSpecifies which UDP port number to receive IP/UDP packets from.rw Integer32 ( 1 .. 65535 ) .1.3.6.1.4.1.18086.3080.10.44 |
pt3080TSoIPRx2ReceiverEnableEnables the reception of IP/UDP packets with transport stream data to be forward into the modulator.rw Enumeration .1.3.6.1.4.1.18086.3080.10.45 |
pt3080TSoIPRx2PacketErrorRatioLimitSpecifies limit for the Packet Error Ratio. If the limit is exceeded and alarm is raised.rw Integer32 ( 0 .. 500 ) UNITS "0.1 %" .1.3.6.1.4.1.18086.3080.10.46 |
pt3080TSoIPRx2StatusThe current status of the receiver. Locked means minimum of 3 IP/UDP frames received per second.ro Enumeration .1.3.6.1.4.1.18086.3080.10.47 |
pt3080TSoIPRx2CurrentIPAddressThe current receive IP address for the TSoIP interface.ro IpAddress .1.3.6.1.4.1.18086.3080.10.48 |
pt3080TSoIPRx2SequenceErrorsThe number of sequence errors on this channel on the TSoIP interface.ro Integer32 .1.3.6.1.4.1.18086.3080.10.49 |
pt3080TSoIPRx2PacketErrorRatioShows the current error ratio of uncoming traffic for this UDP port.ro Integer32 UNITS "0.1 %" .1.3.6.1.4.1.18086.3080.10.50 |
pt3080TSoIPRx2LostIPFramesThe number of lost IP frames on the channel on the TSoIP interface. The sequence numbers of frames employed by the RTP protocol are used to determine this statistic.ro Integer32 .1.3.6.1.4.1.18086.3080.10.51 |
pt3080TSoIPRx2CorrectedIPFramesThe number of corrected IP frames (via FEC) on this cannel on the TSoIP interface.ro Integer32 .1.3.6.1.4.1.18086.3080.10.52 |
pt3080TSoIPRx2FecColumnThe curent FEC Column (L) number for this cannel on the TSoIP interface.ro Integer32 .1.3.6.1.4.1.18086.3080.10.53 |
pt3080TSoIPRx2FecRowThe curent FEC Row (D) number for this cannel on the TSoIP interface.ro Integer32 .1.3.6.1.4.1.18086.3080.10.54 |
pt3080TSoIPRx2PacketsPerFrameThe curent number of TS packets per IP frames on this cannel on the TSoIP interface.ro Integer32 .1.3.6.1.4.1.18086.3080.10.55 |
pt3080TSoIPRx2IpBitrateShows the current bitrate of uncoming traffic for this UDP port.ro Integer32 UNITS "0.001 Mbps" .1.3.6.1.4.1.18086.3080.10.56 |
pt3080TSoIPRx2QueueSizeThe curent queue size for this cannel on the TSoIP interface.ro Integer32 UNITS "1 Frames" .1.3.6.1.4.1.18086.3080.10.57 |
pt3080TSoIPRx2CurrentLatencyThe current latency incurrent by queue size on this channel on the TSoIP interface.ro Integer32 UNITS "0.1 ms" .1.3.6.1.4.1.18086.3080.10.58 |
pt3080TSoIPRx2TSPacketSizeThe curent size of TS packets on this cannel on the TSoIP interface. Usually 188 or 204.ro Integer32 .1.3.6.1.4.1.18086.3080.10.59 |
pt3080TSoIPRx2OverrunIPFramesThe number of IP frames lost on the channel on the TSoIP interface due to overrun. Overrun happens when the outgoing rate of the modulator is lower that the incoming rate of TSoIP data.ro Integer32 .1.3.6.1.4.1.18086.3080.10.60 |
pt3080Monitor OBJECT IDENTIFIER .1.3.6.1.4.1.18086.3080.12 |
pt3080MonitorSourceSelects the source to be monitored on the ASI monitor output.rw Enumeration .1.3.6.1.4.1.18086.3080.12.1 |
pt3080MonitorTSoIPEnableEnable or disable the generation of monitor data over TSoIP.rw Enumeration .1.3.6.1.4.1.18086.3080.12.10 |
pt3080MonitorTSoIPSourceSelects the source to be monitored on the TSoIP monitor output.rw Enumeration .1.3.6.1.4.1.18086.3080.12.11 |
pt3080MonitorTSoIPDestIPAddressSelects the destination IP address of the data to be monitored on the TSoIP monitor output.rw IpAddress .1.3.6.1.4.1.18086.3080.12.12 |
pt3080MonitorTSoIPDestPortSelects the destination UDP Port number of the data to be monitored on the TSoIP monitor output.rw Integer32 ( 1 .. 65535 ) .1.3.6.1.4.1.18086.3080.12.13 |
pt3080MonitorTSoIPProtocolSelects the protocol to be used on the TSoIP monitor output.rw Enumeration .1.3.6.1.4.1.18086.3080.12.14 |
pt3080MonitorTSoIPEnableFecEnable or disable FEC protocol on the output data from the TSoIP Monitor.rw Enumeration .1.3.6.1.4.1.18086.3080.12.15 |
pt3080MonitorTSoIPFecColumnSelects the FEC protocoll Column number (L) of the data to be monitored on the TSoIP monitor output.rw Integer32 ( 1 .. 20 ) .1.3.6.1.4.1.18086.3080.12.16 |
pt3080MonitorTSoIPFecRowSelects the FEC protocol Row number (D) of the data to be monitored on the TSoIP monitor output.rw Integer32 ( 4 .. 20 ) .1.3.6.1.4.1.18086.3080.12.17 |
pt3080MonitorTSoIPFecSkewSelects the FEC protocol Skew (non block alignment of FEC Frame) of the data to be monitored on the TSoIP monitor output.rw Integer32 ( 0 .. 4 ) .1.3.6.1.4.1.18086.3080.12.18 |
pt3080MonitorTSoIPKeepNullPacketsRetain or discard Null packets of the generation of monitor data over TSoIP.rw Enumeration .1.3.6.1.4.1.18086.3080.12.19 |
pt3080MonitorTSoIPPacketsPerFrameSet the number of TS packets to send per IP frame on the TSoIP monitor output.rw Integer32 ( 1 .. 7 ) .1.3.6.1.4.1.18086.3080.12.20 |
pt3080MonitorTSoIPUDPChecksumGenerate UDP checksum in the outgoing packets of the TSoIP Monitor.rw Enumeration .1.3.6.1.4.1.18086.3080.12.21 |
pt3080MonitorTSoIPDSCPSelects the value of the TOS/DSCP field in IP packets to be sent on the TSoIP monitor output.rw Integer32 ( 0 .. 255 ) .1.3.6.1.4.1.18086.3080.12.22 |
pt3080MonitorTSoIPTTLSelects the value of the TTL (Time-To-Live) field in IP packets to be sent on the TSoIP monitor output.rw Integer32 ( 1 .. 255 ) .1.3.6.1.4.1.18086.3080.12.23 |
pt3080MonitorTSoIPGenerateErrorArtificially generate an error rate as a percentage of frames lost on the TSoIP monitor output.rw Integer32 ( 0 .. 1000 ) UNITS "0.1 %" .1.3.6.1.4.1.18086.3080.12.24 |
pt3080MonitorTSoIPMulticastLanSelectSpecifies which virtual LAN interface to transmit Multicast IP/UDP packets out via.rw Enumeration .1.3.6.1.4.1.18086.3080.12.25 |
pt3080MonitorTSoIPIpBitrateThe current rate IP packets traffic to be sent on the TSoIP monitor output.ro Integer32 UNITS "0.001 Mbps" .1.3.6.1.4.1.18086.3080.12.30 |
pt3080MonitorTSoIPLostIPFramesThe number of IP packets traffic generated but lost on the TSoIP monitor output.ro Integer32 UNITS "1 Mbps" .1.3.6.1.4.1.18086.3080.12.31 |
pt3080MonitorTSoIPTSSizeThe current TS packet size (188 or 204) on the TSoIP monitor output.ro Integer32 UNITS "1 bytes" .1.3.6.1.4.1.18086.3080.12.32 |
pt3080Test OBJECT IDENTIFIER .1.3.6.1.4.1.18086.3080.13 |
pt3080TestEnablecontrols the test signal generation. This cannot be used when network mode is SFN. Only a subset is available in repeater mode. test signal output state: - testSignalsArray[testSignals_OFF] Normal operation. No test signal. - testSignalsArray[testSignals_SCAR] A single carrier output is provided. - testSignalsArray[testSignals_SWEEP2] A test signal with full spectrum bandwidth and a 3dB peak to average power ratio. (OFDM PPR-3). - testSignalsArray[testSignals_PRBSON] Forced transmission of stuffing data only (null packets) irrespective of the status of the MPEG-2 transport stream input. - testSignalsArray[testSignals_PRBSAUTO] Automatic transmission of spectrum based on stuffing data when no MPEG-2 TS input is available.rw Enumeration .1.3.6.1.4.1.18086.3080.13.1 |
pt3080TestEnableReconnectControls whether the test signal shall reconnect after reset. This value is saved in non-volatile memory and thus survives a reboot. - onOffArray[TEXT_INDEX_OFF] The selected test signal will be set to OFF after reset. - onOffArray[TEXT_INDEX_ON] The selected test signal will be output after reset.rw Enumeration .1.3.6.1.4.1.18086.3080.13.2 |
pt3080TestScarrierLevelControl level of the single carrier test signal.rw Integer32 ( 0 .. 65535 ) .1.3.6.1.4.1.18086.3080.13.3 |
pt3080TestscarrierFrequencyOffsetControl frequency offset of the single carrier test signal.rw Integer32 ( -4000000 .. 4000000 ) UNITS "1 Hz" .1.3.6.1.4.1.18086.3080.13.4 |
pt3080Alarm OBJECT IDENTIFIER .1.3.6.1.4.1.18086.3080.14 |
pt3080GroupAlarmTableThis table contains the group alarms SEQUENCE OF Pt3080GroupAlarmEntry .1.3.6.1.4.1.18086.3080.14.1 |
pt3080GroupAlarmEntryAn entry for the alarms Pt3080GroupAlarmEntry .1.3.6.1.4.1.18086.3080.14.1.1 |
pt3080GroupAlarmIDUnique ID for this alarm Integer32 ( 0 .. 255 ) .1.3.6.1.4.1.18086.3080.14.1.1.1 |
pt3080GroupAlarmDescriptionDescription for this alarmro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.14.1.1.2 |
pt3080GroupAlarmStateCurrent GroupAlarm state conditionro Enumeration .1.3.6.1.4.1.18086.3080.14.1.1.3 |
pt3080GroupAlarmActionEventlogWill the current alarm generate an event in the eventlogrw Enumeration .1.3.6.1.4.1.18086.3080.14.1.1.4 |
pt3080GroupAlarmActionRelay1Will the current alarm activate relay1rw Enumeration .1.3.6.1.4.1.18086.3080.14.1.1.5 |
pt3080GroupAlarmActionRelay2Will the current alarm activate relay2rw Enumeration .1.3.6.1.4.1.18086.3080.14.1.1.6 |
pt3080GroupAlarmActionTrapWill the current alarm generate a traprw Enumeration .1.3.6.1.4.1.18086.3080.14.1.1.7 |
pt3080GroupAlarmActionEmailWill the current alarm generate an emailrw Enumeration .1.3.6.1.4.1.18086.3080.14.1.1.8 |
pt3080GroupAlarmActionAlarmLEDWill the current alarm turn Alarm LED on frontpanel onrw Enumeration .1.3.6.1.4.1.18086.3080.14.1.1.9 |
pt3080GroupAlarmActionForceModeWill the current alarm mute outputrw Enumeration .1.3.6.1.4.1.18086.3080.14.1.1.10 |
pt3080ASITSPrimaryAlarmTableThis table contains the ASI TS-Primary alarms SEQUENCE OF Pt3080ASITSPrimaryAlarmEntry .1.3.6.1.4.1.18086.3080.14.5 |
pt3080ASITSPrimaryAlarmEntryAn entry for the alarms Pt3080ASITSPrimaryAlarmEntry .1.3.6.1.4.1.18086.3080.14.5.1 |
pt3080ASITSPrimaryAlarmIDUnique ID for this alarm Integer32 ( 0 .. 255 ) .1.3.6.1.4.1.18086.3080.14.5.1.1 |
pt3080ASITSPrimaryAlarmDescriptionDescription for this alarmro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.14.5.1.2 |
pt3080ASITSPrimaryAlarmStateCurrent ASITSPrimaryAlarm state conditionro Enumeration .1.3.6.1.4.1.18086.3080.14.5.1.3 |
pt3080ASITSPrimaryAlarmActionEventlogWill the current alarm generate an event in the eventlogrw Enumeration .1.3.6.1.4.1.18086.3080.14.5.1.4 |
pt3080ASITSPrimaryAlarmActionRelay1Will the current alarm activate relay1rw Enumeration .1.3.6.1.4.1.18086.3080.14.5.1.5 |
pt3080ASITSPrimaryAlarmActionRelay2Will the current alarm activate relay2rw Enumeration .1.3.6.1.4.1.18086.3080.14.5.1.6 |
pt3080ASITSPrimaryAlarmActionTrapWill the current alarm generate a traprw Enumeration .1.3.6.1.4.1.18086.3080.14.5.1.7 |
pt3080ASITSPrimaryAlarmActionEmailWill the current alarm generate an emailrw Enumeration .1.3.6.1.4.1.18086.3080.14.5.1.8 |
pt3080ASITSPrimaryAlarmActionAlarmLEDWill the current alarm turn Alarm LED on frontpanel onrw Enumeration .1.3.6.1.4.1.18086.3080.14.5.1.9 |
pt3080ASITSPrimaryAlarmActionForceModeWill the current alarm mute outputrw Enumeration .1.3.6.1.4.1.18086.3080.14.5.1.10 |
pt3080ASITSSecondaryAlarmTableThis table contains the ASI alarms SEQUENCE OF Pt3080ASITSSecondaryAlarmEntry .1.3.6.1.4.1.18086.3080.14.6 |
pt3080ASITSSecondaryAlarmEntryAn entry for the alarms Pt3080ASITSSecondaryAlarmEntry .1.3.6.1.4.1.18086.3080.14.6.1 |
pt3080ASITSSecondaryAlarmIDUnique ID for this alarm Integer32 ( 0 .. 255 ) .1.3.6.1.4.1.18086.3080.14.6.1.1 |
pt3080ASITSSecondaryAlarmDescriptionDescription for this alarmro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.14.6.1.2 |
pt3080ASITSSecondaryAlarmStateCurrent ASITSSecondaryAlarm state conditionro Enumeration .1.3.6.1.4.1.18086.3080.14.6.1.3 |
pt3080ASITSSecondaryAlarmActionEventlogWill the current alarm generate an event in the eventlogrw Enumeration .1.3.6.1.4.1.18086.3080.14.6.1.4 |
pt3080ASITSSecondaryAlarmActionRelay1Will the current alarm activate relay1rw Enumeration .1.3.6.1.4.1.18086.3080.14.6.1.5 |
pt3080ASITSSecondaryAlarmActionRelay2Will the current alarm activate relay2rw Enumeration .1.3.6.1.4.1.18086.3080.14.6.1.6 |
pt3080ASITSSecondaryAlarmActionTrapWill the current alarm generate a traprw Enumeration .1.3.6.1.4.1.18086.3080.14.6.1.7 |
pt3080ASITSSecondaryAlarmActionEmailWill the current alarm generate an emailrw Enumeration .1.3.6.1.4.1.18086.3080.14.6.1.8 |
pt3080ASITSSecondaryAlarmActionAlarmLEDWill the current alarm turn Alarm LED on frontpanel onrw Enumeration .1.3.6.1.4.1.18086.3080.14.6.1.9 |
pt3080ASITSSecondaryAlarmActionForceModeWill the current alarm mute outputrw Enumeration .1.3.6.1.4.1.18086.3080.14.6.1.10 |
pt3080SFNAlarmTableThis table contains the SFN alarms SEQUENCE OF Pt3080SFNAlarmEntry .1.3.6.1.4.1.18086.3080.14.7 |
pt3080SFNAlarmEntryAn entry for the alarms Pt3080SFNAlarmEntry .1.3.6.1.4.1.18086.3080.14.7.1 |
pt3080SFNAlarmIDUnique ID for this alarm Integer32 ( 0 .. 255 ) .1.3.6.1.4.1.18086.3080.14.7.1.1 |
pt3080SFNAlarmDescriptionDescription for this alarmro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.14.7.1.2 |
pt3080SFNAlarmStateCurrent SFNAlarm state conditionro Enumeration .1.3.6.1.4.1.18086.3080.14.7.1.3 |
pt3080SFNAlarmActionEventlogWill the current alarm generate an event in the eventlogrw Enumeration .1.3.6.1.4.1.18086.3080.14.7.1.4 |
pt3080SFNAlarmActionRelay1Will the current alarm activate relay1rw Enumeration .1.3.6.1.4.1.18086.3080.14.7.1.5 |
pt3080SFNAlarmActionRelay2Will the current alarm activate relay2rw Enumeration .1.3.6.1.4.1.18086.3080.14.7.1.6 |
pt3080SFNAlarmActionTrapWill the current alarm generate a traprw Enumeration .1.3.6.1.4.1.18086.3080.14.7.1.7 |
pt3080SFNAlarmActionEmailWill the current alarm generate an emailrw Enumeration .1.3.6.1.4.1.18086.3080.14.7.1.8 |
pt3080SFNAlarmActionAlarmLEDWill the current alarm turn Alarm LED on frontpanel onrw Enumeration .1.3.6.1.4.1.18086.3080.14.7.1.9 |
pt3080SFNAlarmActionForceModeWill the current alarm mute outputrw Enumeration .1.3.6.1.4.1.18086.3080.14.7.1.10 |
pt3080ReferenceAlarmTableThis table contains the Reference alarms SEQUENCE OF Pt3080ReferenceAlarmEntry .1.3.6.1.4.1.18086.3080.14.8 |
pt3080ReferenceAlarmEntryAn entry for the alarms Pt3080ReferenceAlarmEntry .1.3.6.1.4.1.18086.3080.14.8.1 |
pt3080ReferenceAlarmIDUnique ID for this alarm Integer32 ( 0 .. 255 ) .1.3.6.1.4.1.18086.3080.14.8.1.1 |
pt3080ReferenceAlarmDescriptionDescription for this alarmro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.14.8.1.2 |
pt3080ReferenceAlarmStateCurrent ReferenceAlarm state conditionro Enumeration .1.3.6.1.4.1.18086.3080.14.8.1.3 |
pt3080ReferenceAlarmActionEventlogWill the current alarm generate an event in the eventlogrw Enumeration .1.3.6.1.4.1.18086.3080.14.8.1.4 |
pt3080ReferenceAlarmActionRelay1Will the current alarm activate relay1rw Enumeration .1.3.6.1.4.1.18086.3080.14.8.1.5 |
pt3080ReferenceAlarmActionRelay2Will the current alarm activate relay2rw Enumeration .1.3.6.1.4.1.18086.3080.14.8.1.6 |
pt3080ReferenceAlarmActionTrapWill the current alarm generate a traprw Enumeration .1.3.6.1.4.1.18086.3080.14.8.1.7 |
pt3080ReferenceAlarmActionEmailWill the current alarm generate an emailrw Enumeration .1.3.6.1.4.1.18086.3080.14.8.1.8 |
pt3080ReferenceAlarmActionAlarmLEDWill the current alarm turn Alarm LED on frontpanel onrw Enumeration .1.3.6.1.4.1.18086.3080.14.8.1.9 |
pt3080ReferenceAlarmActionForceModeWill the current alarm mute outputrw Enumeration .1.3.6.1.4.1.18086.3080.14.8.1.10 |
pt3080RFAlarmTableThis table contains the RF alarms SEQUENCE OF Pt3080RFAlarmEntry .1.3.6.1.4.1.18086.3080.14.9 |
pt3080RFAlarmEntryAn entry for the alarms Pt3080RFAlarmEntry .1.3.6.1.4.1.18086.3080.14.9.1 |
pt3080RFAlarmIDUnique ID for this alarm Integer32 ( 0 .. 255 ) .1.3.6.1.4.1.18086.3080.14.9.1.1 |
pt3080RFAlarmDescriptionDescription for this alarmro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.14.9.1.2 |
pt3080RFAlarmStateCurrent RFAlarm state conditionro Enumeration .1.3.6.1.4.1.18086.3080.14.9.1.3 |
pt3080RFAlarmActionEventlogWill the current alarm generate an event in the eventlogrw Enumeration .1.3.6.1.4.1.18086.3080.14.9.1.4 |
pt3080RFAlarmActionRelay1Will the current alarm activate relay1rw Enumeration .1.3.6.1.4.1.18086.3080.14.9.1.5 |
pt3080RFAlarmActionRelay2Will the current alarm activate relay2rw Enumeration .1.3.6.1.4.1.18086.3080.14.9.1.6 |
pt3080RFAlarmActionTrapWill the current alarm generate a traprw Enumeration .1.3.6.1.4.1.18086.3080.14.9.1.7 |
pt3080RFAlarmActionEmailWill the current alarm generate an emailrw Enumeration .1.3.6.1.4.1.18086.3080.14.9.1.8 |
pt3080RFAlarmActionAlarmLEDWill the current alarm turn Alarm LED on frontpanel onrw Enumeration .1.3.6.1.4.1.18086.3080.14.9.1.9 |
pt3080RFAlarmActionForceModeWill the current alarm mute outputrw Enumeration .1.3.6.1.4.1.18086.3080.14.9.1.10 |
pt3080GPSAlarmTableThis table contains the GPS alarms SEQUENCE OF Pt3080GPSAlarmEntry .1.3.6.1.4.1.18086.3080.14.10 |
pt3080GPSAlarmEntryAn entry for the alarms Pt3080GPSAlarmEntry .1.3.6.1.4.1.18086.3080.14.10.1 |
pt3080GPSAlarmIDUnique ID for this alarm Integer32 ( 0 .. 255 ) .1.3.6.1.4.1.18086.3080.14.10.1.1 |
pt3080GPSAlarmDescriptionDescription for this alarmro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.14.10.1.2 |
pt3080GPSAlarmStateCurrent GPSAlarm state conditionro Enumeration .1.3.6.1.4.1.18086.3080.14.10.1.3 |
pt3080GPSAlarmActionEventlogWill the current alarm generate an event in the eventlogrw Enumeration .1.3.6.1.4.1.18086.3080.14.10.1.4 |
pt3080GPSAlarmActionRelay1Will the current alarm activate relay1rw Enumeration .1.3.6.1.4.1.18086.3080.14.10.1.5 |
pt3080GPSAlarmActionRelay2Will the current alarm activate relay2rw Enumeration .1.3.6.1.4.1.18086.3080.14.10.1.6 |
pt3080GPSAlarmActionTrapWill the current alarm generate a traprw Enumeration .1.3.6.1.4.1.18086.3080.14.10.1.7 |
pt3080GPSAlarmActionEmailWill the current alarm generate an emailrw Enumeration .1.3.6.1.4.1.18086.3080.14.10.1.8 |
pt3080GPSAlarmActionAlarmLEDWill the current alarm turn Alarm LED on frontpanel onrw Enumeration .1.3.6.1.4.1.18086.3080.14.10.1.9 |
pt3080GPSAlarmActionForceModeWill the current alarm mute outputrw Enumeration .1.3.6.1.4.1.18086.3080.14.10.1.10 |
pt3080TSoIPAlarmTableThis table contains the TSoIP alarms SEQUENCE OF Pt3080TSoIPAlarmEntry .1.3.6.1.4.1.18086.3080.14.12 |
pt3080TSoIPAlarmEntryAn entry for the alarms Pt3080TSoIPAlarmEntry .1.3.6.1.4.1.18086.3080.14.12.1 |
pt3080TSoIPAlarmIDUnique ID for this alarm Integer32 ( 0 .. 255 ) .1.3.6.1.4.1.18086.3080.14.12.1.1 |
pt3080TSoIPAlarmDescriptionDescription for this alarmro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.14.12.1.2 |
pt3080TSoIPAlarmStateCurrent TSoIPAlarm state conditionro Enumeration .1.3.6.1.4.1.18086.3080.14.12.1.3 |
pt3080TSoIPAlarmActionEventlogWill the current alarm generate an event in the eventlogrw Enumeration .1.3.6.1.4.1.18086.3080.14.12.1.4 |
pt3080TSoIPAlarmActionRelay1Will the current alarm activate relay1rw Enumeration .1.3.6.1.4.1.18086.3080.14.12.1.5 |
pt3080TSoIPAlarmActionRelay2Will the current alarm activate relay2rw Enumeration .1.3.6.1.4.1.18086.3080.14.12.1.6 |
pt3080TSoIPAlarmActionTrapWill the current alarm generate a traprw Enumeration .1.3.6.1.4.1.18086.3080.14.12.1.7 |
pt3080TSoIPAlarmActionEmailWill the current alarm generate an emailrw Enumeration .1.3.6.1.4.1.18086.3080.14.12.1.8 |
pt3080TSoIPAlarmActionAlarmLEDWill the current alarm turn Alarm LED on frontpanel onrw Enumeration .1.3.6.1.4.1.18086.3080.14.12.1.9 |
pt3080TSoIPAlarmActionForceModeWill the current alarm mute outputrw Enumeration .1.3.6.1.4.1.18086.3080.14.12.1.10 |
pt3080ExternalAlarmTableThis table contains the External alarms SEQUENCE OF Pt3080ExternalAlarmEntry .1.3.6.1.4.1.18086.3080.14.13 |
pt3080ExternalAlarmEntryAn entry for the alarms Pt3080ExternalAlarmEntry .1.3.6.1.4.1.18086.3080.14.13.1 |
pt3080ExternalAlarmIDUnique ID for this alarm Integer32 ( 0 .. 255 ) .1.3.6.1.4.1.18086.3080.14.13.1.1 |
pt3080ExternalAlarmDescriptionDescription for this alarmro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.14.13.1.2 |
pt3080ExternalAlarmStateCurrent ExternalAlarm state conditionro Enumeration .1.3.6.1.4.1.18086.3080.14.13.1.3 |
pt3080ExternalAlarmActionEventlogWill the current alarm generate an event in the eventlogrw Enumeration .1.3.6.1.4.1.18086.3080.14.13.1.4 |
pt3080ExternalAlarmActionRelay1Will the current alarm activate relay1rw Enumeration .1.3.6.1.4.1.18086.3080.14.13.1.5 |
pt3080ExternalAlarmActionRelay2Will the current alarm activate relay2rw Enumeration .1.3.6.1.4.1.18086.3080.14.13.1.6 |
pt3080ExternalAlarmActionTrapWill the current alarm generate a traprw Enumeration .1.3.6.1.4.1.18086.3080.14.13.1.7 |
pt3080ExternalAlarmActionEmailWill the current alarm generate an emailrw Enumeration .1.3.6.1.4.1.18086.3080.14.13.1.8 |
pt3080ExternalAlarmActionAlarmLEDWill the current alarm turn Alarm LED on frontpanel onrw Enumeration .1.3.6.1.4.1.18086.3080.14.13.1.9 |
pt3080ExternalAlarmActionForceModeWill the current alarm mute outputrw Enumeration .1.3.6.1.4.1.18086.3080.14.13.1.10 |
pt3080HWMonitorAlarmTableThis table contains the HW Monitor alarms SEQUENCE OF Pt3080HWMonitorAlarmEntry .1.3.6.1.4.1.18086.3080.14.14 |
pt3080HWMonitorAlarmEntryAn entry for the alarms Pt3080HWMonitorAlarmEntry .1.3.6.1.4.1.18086.3080.14.14.1 |
pt3080HWMonitorAlarmIDUnique ID for this alarm Integer32 ( 0 .. 255 ) .1.3.6.1.4.1.18086.3080.14.14.1.1 |
pt3080HWMonitorAlarmDescriptionDescription for this alarmro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.14.14.1.2 |
pt3080HWMonitorAlarmStateCurrent HWMonitorAlarm state conditionro Enumeration .1.3.6.1.4.1.18086.3080.14.14.1.3 |
pt3080HWMonitorAlarmActionEventlogWill the current alarm generate an event in the eventlogrw Enumeration .1.3.6.1.4.1.18086.3080.14.14.1.4 |
pt3080HWMonitorAlarmActionRelay1Will the current alarm activate relay1rw Enumeration .1.3.6.1.4.1.18086.3080.14.14.1.5 |
pt3080HWMonitorAlarmActionRelay2Will the current alarm activate relay2rw Enumeration .1.3.6.1.4.1.18086.3080.14.14.1.6 |
pt3080HWMonitorAlarmActionTrapWill the current alarm generate a traprw Enumeration .1.3.6.1.4.1.18086.3080.14.14.1.7 |
pt3080HWMonitorAlarmActionEmailWill the current alarm generate an emailrw Enumeration .1.3.6.1.4.1.18086.3080.14.14.1.8 |
pt3080HWMonitorAlarmActionAlarmLEDWill the current alarm turn Alarm LED on frontpanel onrw Enumeration .1.3.6.1.4.1.18086.3080.14.14.1.9 |
pt3080HWMonitorAlarmActionForceModeWill the current alarm mute outputrw Enumeration .1.3.6.1.4.1.18086.3080.14.14.1.10 |
pt3080CommsAlarmTableThis table contains the Communication alarms SEQUENCE OF Pt3080CommsAlarmEntry .1.3.6.1.4.1.18086.3080.14.15 |
pt3080CommsAlarmEntryAn entry for the alarms Pt3080CommsAlarmEntry .1.3.6.1.4.1.18086.3080.14.15.1 |
pt3080CommsAlarmIDUnique ID for this alarm Integer32 ( 0 .. 255 ) .1.3.6.1.4.1.18086.3080.14.15.1.1 |
pt3080CommsAlarmDescriptionDescription for this alarmro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.14.15.1.2 |
pt3080CommsAlarmStateCurrent CommsAlarm state conditionro Enumeration .1.3.6.1.4.1.18086.3080.14.15.1.3 |
pt3080CommsAlarmActionEventlogWill the current alarm generate an event in the eventlogrw Enumeration .1.3.6.1.4.1.18086.3080.14.15.1.4 |
pt3080CommsAlarmActionRelay1Will the current alarm activate relay1rw Enumeration .1.3.6.1.4.1.18086.3080.14.15.1.5 |
pt3080CommsAlarmActionRelay2Will the current alarm activate relay2rw Enumeration .1.3.6.1.4.1.18086.3080.14.15.1.6 |
pt3080CommsAlarmActionTrapWill the current alarm generate a traprw Enumeration .1.3.6.1.4.1.18086.3080.14.15.1.7 |
pt3080CommsAlarmActionEmailWill the current alarm generate an emailrw Enumeration .1.3.6.1.4.1.18086.3080.14.15.1.8 |
pt3080CommsAlarmActionAlarmLEDWill the current alarm turn Alarm LED on frontpanel onrw Enumeration .1.3.6.1.4.1.18086.3080.14.15.1.9 |
pt3080CommsAlarmActionForceModeWill the current alarm mute outputrw Enumeration .1.3.6.1.4.1.18086.3080.14.15.1.10 |
pt3080ASIAlarmTableThis table contains the ASI alarms SEQUENCE OF Pt3080ASIAlarmEntry .1.3.6.1.4.1.18086.3080.14.16 |
pt3080ASIAlarmEntryAn entry for the alarms Pt3080ASIAlarmEntry .1.3.6.1.4.1.18086.3080.14.16.1 |
pt3080ASIAlarmIDUnique ID for this alarm Integer32 ( 0 .. 255 ) .1.3.6.1.4.1.18086.3080.14.16.1.1 |
pt3080ASIAlarmDescriptionDescription for this alarmro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.14.16.1.2 |
pt3080ASIAlarmStateCurrent ASIAlarm state conditionro Enumeration .1.3.6.1.4.1.18086.3080.14.16.1.3 |
pt3080ASIAlarmActionEventlogWill the current alarm generate an event in the eventlogrw Enumeration .1.3.6.1.4.1.18086.3080.14.16.1.4 |
pt3080ASIAlarmActionRelay1Will the current alarm activate relay1rw Enumeration .1.3.6.1.4.1.18086.3080.14.16.1.5 |
pt3080ASIAlarmActionRelay2Will the current alarm activate relay2rw Enumeration .1.3.6.1.4.1.18086.3080.14.16.1.6 |
pt3080ASIAlarmActionTrapWill the current alarm generate a traprw Enumeration .1.3.6.1.4.1.18086.3080.14.16.1.7 |
pt3080ASIAlarmActionEmailWill the current alarm generate an emailrw Enumeration .1.3.6.1.4.1.18086.3080.14.16.1.8 |
pt3080ASIAlarmActionAlarmLEDWill the current alarm turn Alarm LED on frontpanel onrw Enumeration .1.3.6.1.4.1.18086.3080.14.16.1.9 |
pt3080ASIAlarmActionForceModeWill the current alarm mute outputrw Enumeration .1.3.6.1.4.1.18086.3080.14.16.1.10 |
pt3080DemodulatorAlarmTableThis table contains the Demodulator alarms SEQUENCE OF Pt3080DemodulatorAlarmEntry .1.3.6.1.4.1.18086.3080.14.17 |
pt3080DemodulatorAlarmEntryAn entry for the alarms Pt3080DemodulatorAlarmEntry .1.3.6.1.4.1.18086.3080.14.17.1 |
pt3080DemodulatorAlarmIDUnique ID for this alarm Integer32 ( 0 .. 255 ) .1.3.6.1.4.1.18086.3080.14.17.1.1 |
pt3080DemodulatorAlarmDescriptionDescription for this alarmro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.14.17.1.2 |
pt3080DemodulatorAlarmStateCurrent DemodulatorAlarm state conditionro Enumeration .1.3.6.1.4.1.18086.3080.14.17.1.3 |
pt3080DemodulatorAlarmActionEventlogWill the current alarm generate an event in the eventlogrw Enumeration .1.3.6.1.4.1.18086.3080.14.17.1.4 |
pt3080DemodulatorAlarmActionRelay1Will the current alarm activate relay1rw Enumeration .1.3.6.1.4.1.18086.3080.14.17.1.5 |
pt3080DemodulatorAlarmActionRelay2Will the current alarm activate relay2rw Enumeration .1.3.6.1.4.1.18086.3080.14.17.1.6 |
pt3080DemodulatorAlarmActionTrapWill the current alarm generate a traprw Enumeration .1.3.6.1.4.1.18086.3080.14.17.1.7 |
pt3080DemodulatorAlarmActionEmailWill the current alarm generate an emailrw Enumeration .1.3.6.1.4.1.18086.3080.14.17.1.8 |
pt3080DemodulatorAlarmActionAlarmLEDWill the current alarm turn Alarm LED on frontpanel onrw Enumeration .1.3.6.1.4.1.18086.3080.14.17.1.9 |
pt3080DemodulatorAlarmActionForceModeWill the current alarm mute outputrw Enumeration .1.3.6.1.4.1.18086.3080.14.17.1.10 |
pt3080InternalAlarmTableThis table contains the Internal alarms SEQUENCE OF Pt3080InternalAlarmEntry .1.3.6.1.4.1.18086.3080.14.18 |
pt3080InternalAlarmEntryAn entry for the alarms Pt3080InternalAlarmEntry .1.3.6.1.4.1.18086.3080.14.18.1 |
pt3080InternalAlarmIDUnique ID for this alarm Integer32 ( 0 .. 255 ) .1.3.6.1.4.1.18086.3080.14.18.1.1 |
pt3080InternalAlarmDescriptionDescription for this alarmro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.14.18.1.2 |
pt3080InternalAlarmStateCurrent InternalAlarm state conditionro Enumeration .1.3.6.1.4.1.18086.3080.14.18.1.3 |
pt3080InternalAlarmActionEventlogWill the current alarm generate an event in the eventlogrw Enumeration .1.3.6.1.4.1.18086.3080.14.18.1.4 |
pt3080InternalAlarmActionRelay1Will the current alarm activate relay1rw Enumeration .1.3.6.1.4.1.18086.3080.14.18.1.5 |
pt3080InternalAlarmActionRelay2Will the current alarm activate relay2rw Enumeration .1.3.6.1.4.1.18086.3080.14.18.1.6 |
pt3080InternalAlarmActionTrapWill the current alarm generate a traprw Enumeration .1.3.6.1.4.1.18086.3080.14.18.1.7 |
pt3080InternalAlarmActionEmailWill the current alarm generate an emailrw Enumeration .1.3.6.1.4.1.18086.3080.14.18.1.8 |
pt3080InternalAlarmActionAlarmLEDWill the current alarm turn Alarm LED on frontpanel onrw Enumeration .1.3.6.1.4.1.18086.3080.14.18.1.9 |
pt3080InternalAlarmActionForceModeWill the current alarm mute outputrw Enumeration .1.3.6.1.4.1.18086.3080.14.18.1.10 |
pt3080Preset OBJECT IDENTIFIER .1.3.6.1.4.1.18086.3080.15 |
pt3080PresetTableThis table contains the presets SEQUENCE OF Pt3080PresetEntry .1.3.6.1.4.1.18086.3080.15.1 |
pt3080PresetEntryAn entry for the presets Pt3080PresetEntry .1.3.6.1.4.1.18086.3080.15.1.1 |
pt3080PresetNoUnique number for this preset Integer32 ( 1 .. 10 ) .1.3.6.1.4.1.18086.3080.15.1.1.1 |
pt3080PresetNameName for this presetrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.15.1.1.2 |
pt3080PresetRecallInstall this preset into current running parameter set. Value will always read as 0 and setting it to 0 has no effect.rw Integer32 ( 0 .. 10 ) .1.3.6.1.4.1.18086.3080.15.2 |
pt3080PresetStoreStore the currently running parameter set into this preset Value will always read as 0 and setting it to 0 has no effect.rw Integer32 ( 0 .. 8 ) .1.3.6.1.4.1.18086.3080.15.3 |
pt3080Eventlog OBJECT IDENTIFIER .1.3.6.1.4.1.18086.3080.16 |
pt3080EventlogTableThis table contains the group alarms SEQUENCE OF Pt3080EventlogEntry .1.3.6.1.4.1.18086.3080.16.1 |
pt3080EventlogEntryAn entry for the alarms Pt3080EventlogEntry .1.3.6.1.4.1.18086.3080.16.1.1 |
pt3080EventlogNoUnique number for this event Integer32 ( 1 .. 2047 ) .1.3.6.1.4.1.18086.3080.16.1.1.1 |
pt3080EventlogIDUnique ID for this type of eventro Integer32 .1.3.6.1.4.1.18086.3080.16.1.1.2 |
pt3080EventlogTimestampTimestamp for this eventro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.16.1.1.3 |
pt3080EventlogTextText for this eventro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.16.1.1.4 |
pt3080EventlogClearClear the entire eventlog by setting the value to 1.rw Enumeration .1.3.6.1.4.1.18086.3080.16.2 |
pt3080EventlogEnableEnable eventlog by setting the value to 1.rw Enumeration .1.3.6.1.4.1.18086.3080.16.3 |
pt3080EventlogModeSet eventlog mode to FIFO for keeping the newest entries. Set eventlog mode to FULL for keeping the oldest entries.rw Enumeration .1.3.6.1.4.1.18086.3080.16.4 |
pt3080Comms OBJECT IDENTIFIER .1.3.6.1.4.1.18086.3080.17 |
pt3080CommsLocalStaticIpAddrThe static IP address for this interface. Will be used if DHCP is disabled or unavailable.rw IpAddress .1.3.6.1.4.1.18086.3080.17.1 |
pt3080CommsLocalStaticNetmaskThe static IP netmask for this interface. Will be used if DHCP is disabled or unavailable.rw IpAddress .1.3.6.1.4.1.18086.3080.17.2 |
pt3080CommsLocalDhcpModeEnable/Disable DHCP client on this interface.rw Enumeration .1.3.6.1.4.1.18086.3080.17.3 |
pt3080CommsLocalCurrentIpAddrThe current IP address for this interface.ro IpAddress .1.3.6.1.4.1.18086.3080.17.4 |
pt3080CommsLocalCurrentNetmaskThe current IP netmask for this interface.ro IpAddress .1.3.6.1.4.1.18086.3080.17.5 |
pt3080CommsRemoteStaticIpAddrThe static IP address for this interface. Will be used if DHCP is disabled or unavailable.rw IpAddress .1.3.6.1.4.1.18086.3080.17.7 |
pt3080CommsRemoteStaticNetmaskThe static IP netmask for this interface. Will be used if DHCP is disabled or unavailable.rw IpAddress .1.3.6.1.4.1.18086.3080.17.8 |
pt3080CommsRemoteCurrentIpAddrThe current IP address for this interface.ro IpAddress .1.3.6.1.4.1.18086.3080.17.10 |
pt3080CommsRemoteCurrentNetmaskThe current IP netmask for this interface.ro IpAddress .1.3.6.1.4.1.18086.3080.17.11 |
pt3080CommsGbeAdminStaticIpAddrThe static IP address for this interface. Will be used if DHCP is disabled or unavailable.rw IpAddress .1.3.6.1.4.1.18086.3080.17.13 |
pt3080CommsGbeAdminStaticNetmaskThe static IP netmask for this interface. Will be used if DHCP is disabled or unavailable.rw IpAddress .1.3.6.1.4.1.18086.3080.17.14 |
pt3080CommsGbeAdminCurrentIpAddrThe current IP address for this interface.ro IpAddress .1.3.6.1.4.1.18086.3080.17.16 |
pt3080CommsGbeAdminCurrentNetmaskThe current IP netmask for this interface.ro IpAddress .1.3.6.1.4.1.18086.3080.17.17 |
pt3080CommsStaticDNS1ServerAddressThe IP address of DNS server 1.rw IpAddress .1.3.6.1.4.1.18086.3080.17.19 |
pt3080CommsCurrentDNS1ServerAddressThe Current IP address of DNS server 1.ro IpAddress .1.3.6.1.4.1.18086.3080.17.20 |
pt3080CommsStaticDNS2ServerAddressThe IP address of DNS server 2.rw IpAddress .1.3.6.1.4.1.18086.3080.17.21 |
pt3080CommsCurrentDNS2ServerAddressThe Current IP address of DNS server 2.ro IpAddress .1.3.6.1.4.1.18086.3080.17.22 |
pt3080CommsStaticDNS3ServerAddressThe IP address of DNS server 3.rw IpAddress .1.3.6.1.4.1.18086.3080.17.23 |
pt3080CommsCurrentDNS3ServerAddressThe Current IP address of DNS server 3.ro IpAddress .1.3.6.1.4.1.18086.3080.17.24 |
pt3080CommsStaticDNSDomainThe static DNS domain name for the device. Will be used if DHCP is disabled or unavailable.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.17.25 |
pt3080CommsCurrentDNSDomainThe current DNS domain name for the device.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.17.26 |
pt3080CommsStaticHostnameThe static hostname for the device. Will be used if DHCP is disabled or unavailable.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.17.27 |
pt3080CommsCurrentHostnameThe static hostname for the device. Will be used if DHCP is disabled or unavailable.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.17.28 |
pt3080CommsStaticGatewayThe static IP address for the default router (gateway). Will be used unless DHCP is enabled and the DHCP server is configured to include a default router address.rw IpAddress .1.3.6.1.4.1.18086.3080.17.29 |
pt3080CommsCurrentGatewayThe Current IP address for the default router (gateway).ro IpAddress .1.3.6.1.4.1.18086.3080.17.30 |
pt3080CommsStaticNtpServerAddressThe DNS name or IP address of the NTP server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.17.31 |
pt3080CommsCurrentNtpServerAddressThe Current IP address of the NTP server.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.17.32 |
pt3080CommsEmailServerAddressThe IP address of the Email (SMTP) server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.17.33 |
pt3080CommsAlarmEmailReceiverThe email address of the receipiant of alarm emails.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.17.34 |
pt3080CommsWebServicePortThe TCP port number used for Web Service.rw Integer32 ( 1 .. 65535 ) .1.3.6.1.4.1.18086.3080.17.35 |
pt3080CommsSCPIServicePortThe TCP port number used for SCPI Service.rw Integer32 ( 1 .. 65535 ) .1.3.6.1.4.1.18086.3080.17.36 |
pt3080CommsSCPIServerBaudrateThe Baudrate used for SCPI Service on serial port.rw Enumeration .1.3.6.1.4.1.18086.3080.17.37 |
pt3080CommsRipPortThe UDP port number used for RIP Service.rw Integer32 ( 1 .. 65535 ) .1.3.6.1.4.1.18086.3080.17.38 |
pt3080CommsSCPIUartInterfaceThe Interface used for SCPI Service on serial port.rw Enumeration .1.3.6.1.4.1.18086.3080.17.39 |
pt3080CommsAccessAllowedCurrent access mode allowed: Remote: SNMP via Ethernet, Local: Frontpanelrw Enumeration .1.3.6.1.4.1.18086.3080.17.48 |
pt3080CommsAccessAllowedTimeoutTimeout (in minutes) before local mode reverts to remote mode.rw Integer32 ( 1 .. 1440 ) UNITS "1 min" .1.3.6.1.4.1.18086.3080.17.49 |
pt3080CommsAccessAllowedTimeLeftCurrent time left (in seconds) before local mode reverts to remote mode.ro Integer32 UNITS "1 secs" .1.3.6.1.4.1.18086.3080.17.50 |
pt3080CommsAccessPasswordObserverThe access password for Observer level access. Will always read as empty.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.17.51 |
pt3080CommsAccessPasswordOperatorThe access password for Operator level access. Will always read as empty.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.17.52 |
pt3080CommsAccessPasswordAdministratorThe access password for Administrator level access. Will always read as empty.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.17.53 |
pt3080CommsSNMPServicePortThe UDP port number used for SNMP Service.rw Integer32 ( 1 .. 65535 ) .1.3.6.1.4.1.18086.3080.17.55 |
pt3080CommsSNMPReadOnlyCommunityThe Read-only community string used to access the SNMP Service.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.17.56 |
pt3080CommsSNMPReadWriteCommunityThe Read-Write community string used to access the SNMP Service.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.17.57 |
pt3080CommsSNMPTrapCommunityThe Trap community string used when sending SNMP Traps.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.17.58 |
pt3080CommsSNMPTrapDestinationThe destination IP address for the SNMP traps.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.17.59 |
pt3080CommsSNMPTrapDestinationPortThe UDP port number used for Trap destination .rw Integer32 ( 1 .. 65535 ) .1.3.6.1.4.1.18086.3080.17.60 |
pt3080CommsRemoteDhcpModeEnable/Disable DHCP client on this interface.rw Enumeration .1.3.6.1.4.1.18086.3080.17.73 |
pt3080CommsGbeAdminDhcpModeEnable/Disable DHCP client on this interface.rw Enumeration .1.3.6.1.4.1.18086.3080.17.74 |
pt3080CommsBackupDhcpModeEnable/Disable DHCP client on this interface.rw Enumeration .1.3.6.1.4.1.18086.3080.17.75 |
pt3080CommsLocalPhysicalInterfaceThe Physical Ethernet Interface of this (virtual) interface.rw Enumeration .1.3.6.1.4.1.18086.3080.17.80 |
pt3080CommsRemotePhysicalInterfaceThe Physical Ethernet Interface of this (virtual) interface.rw Enumeration .1.3.6.1.4.1.18086.3080.17.81 |
pt3080CommsGbeAdminPhysicalInterfaceThe Physical Ethernet Interface of this (virtual) interface.rw Enumeration .1.3.6.1.4.1.18086.3080.17.82 |
pt3080CommsBroadcastStormProtectionEnable/Disable broadcast (and multicast) storm Protection. This will limit the network ingress rate on physical Ethernet port 0 and 1 to roughly 100mbit/s.rw Enumeration .1.3.6.1.4.1.18086.3080.17.94 |
pt3080CommsIGMPv2UnsolicitedReportIntervalThe time interval between unsolicited IGMPv2/v1 reports being sent. See RFC2236. The number of such report being sent is controlled by the Query Robustness Count.rw Integer32 ( 1 .. 60000 ) UNITS "1 ms" .1.3.6.1.4.1.18086.3080.17.95 |
pt3080CommsIGMPv3UnsolicitedReportIntervalThe time interval between unsolicited IGMPv3 reports being sent. See RFC3376. The number of such report being sent is controlled by the Query Robustness Count.rw Integer32 ( 1 .. 60000 ) UNITS "1 ms" .1.3.6.1.4.1.18086.3080.17.96 |
pt3080CommsIGMPQueryRobustnessCountThe Number of Query Replies sent. The higher a number, the more robust IGMP setup is. At the cost of traffic on the network. Note: Changing this parameter doesnt take effect on a network interface until it has (re-)enabled.rw Integer32 ( 2 .. 16 ) .1.3.6.1.4.1.18086.3080.17.97 |
pt3080CommsSeparatedSwitchPortsWill the ports on the switch in the backplane forward LAN traffic to each other or will they be separated and only forward traffic to/from the modulator/repeater.rw Enumeration .1.3.6.1.4.1.18086.3080.17.98 |
pt3080CommsIGMPVersionSelect which IGMP Version to use.rw Enumeration .1.3.6.1.4.1.18086.3080.17.99 |
pt3080CommsLocalIpMulticastAddrThe IP Multicast address for this interface.rw IpAddress .1.3.6.1.4.1.18086.3080.17.100 |
pt3080CommsLocalVlanEnableEnable/Disable VLAN on this interface.rw Enumeration .1.3.6.1.4.1.18086.3080.17.101 |
pt3080CommsLocalVlanIdVLAN ID to use on this interface, if VLAN is enabled. Please note that VLAN ID 4001 and 4002 are used for internal switching and thus cannot be used on any interface.rw Integer32 ( 1 .. 4095 ) .1.3.6.1.4.1.18086.3080.17.102 |
pt3080CommsLocalServiceSNMPEnable/Disable SNMP service on this interface.rw Enumeration .1.3.6.1.4.1.18086.3080.17.103 |
pt3080CommsLocalServiceSCPIEnable/Disable SCPI service on this interface.rw Enumeration .1.3.6.1.4.1.18086.3080.17.104 |
pt3080CommsLocalServiceTSoIPEnable/Disable TSoIP service on this interface.rw Enumeration .1.3.6.1.4.1.18086.3080.17.105 |
pt3080CommsLocalServiceRIPEnable/Disable RIP service on this interface.rw Enumeration .1.3.6.1.4.1.18086.3080.17.106 |
pt3080CommsRemoteIpMulticastAddrThe IP Multicast address for this interface.rw IpAddress .1.3.6.1.4.1.18086.3080.17.110 |
pt3080CommsRemoteVlanEnableEnable/Disable VLAN on this interface.rw Enumeration .1.3.6.1.4.1.18086.3080.17.111 |
pt3080CommsRemoteVlanIdVLAN ID to use on this interface, if VLAN is enabled. Please note that VLAN ID 4001 and 4002 are used for internal switching and thus cannot be used on any interface.rw Integer32 ( 1 .. 4095 ) .1.3.6.1.4.1.18086.3080.17.112 |
pt3080CommsRemoteServiceSNMPEnable/Disable SNMP service on this interface.rw Enumeration .1.3.6.1.4.1.18086.3080.17.113 |
pt3080CommsRemoteServiceSCPIEnable/Disable SCPI service on this interface.rw Enumeration .1.3.6.1.4.1.18086.3080.17.114 |
pt3080CommsRemoteServiceTSoIPEnable/Disable TSoIP service on this interface.rw Enumeration .1.3.6.1.4.1.18086.3080.17.115 |
pt3080CommsRemoteServiceWebEnable/Disable WEB (http) service on this interface.rw Enumeration .1.3.6.1.4.1.18086.3080.17.116 |
pt3080CommsRemoteEnableEnable/Disable this interface.rw Enumeration .1.3.6.1.4.1.18086.3080.17.117 |
pt3080CommsRemoteServiceRIPEnable/Disable RIP service on this interface.rw Enumeration .1.3.6.1.4.1.18086.3080.17.118 |
pt3080CommsGbeAdminIpMulticastAddrThe IP Multicast address for this interface.rw IpAddress .1.3.6.1.4.1.18086.3080.17.120 |
pt3080CommsGbeAdminVlanEnableEnable/Disable VLAN on this interface.rw Enumeration .1.3.6.1.4.1.18086.3080.17.121 |
pt3080CommsGbeAdminVlanIdVLAN ID to use on this interface, if VLAN is enabled. Please note that VLAN ID 4001 and 4002 are used for internal switching and thus cannot be used on any interface.rw Integer32 ( 1 .. 4095 ) .1.3.6.1.4.1.18086.3080.17.122 |
pt3080CommsGbeAdminServiceSNMPEnable/Disable SNMP service on this interface.rw Enumeration .1.3.6.1.4.1.18086.3080.17.123 |
pt3080CommsGbeAdminServiceSCPIEnable/Disable SCPI service on this interface.rw Enumeration .1.3.6.1.4.1.18086.3080.17.124 |
pt3080CommsGbeAdminServiceTSoIPEnable/Disable TSoIP service on this interface.rw Enumeration .1.3.6.1.4.1.18086.3080.17.125 |
pt3080CommsGbeAdminServiceWebEnable/Disable Web (http) service on this interface.rw Enumeration .1.3.6.1.4.1.18086.3080.17.126 |
pt3080CommsGbeAdminEnableEnable/Disable this interface.rw Enumeration .1.3.6.1.4.1.18086.3080.17.127 |
pt3080CommsGbeAdminServiceRIPEnable/Disable RIP service on this interface.rw Enumeration .1.3.6.1.4.1.18086.3080.17.128 |
pt3080CommsBackupEnableEnable/Disable this interface.rw Enumeration .1.3.6.1.4.1.18086.3080.17.150 |
pt3080CommsBackupPhysicalInterfaceThe Physical Ethernet Interface of this (virtual) interface.rw Enumeration .1.3.6.1.4.1.18086.3080.17.151 |
pt3080CommsBackupStaticIpAddrThe static IP address for this interface. Will be used if DHCP is disabled or unavailable.rw IpAddress .1.3.6.1.4.1.18086.3080.17.152 |
pt3080CommsBackupStaticNetmaskThe static IP netmask for this interface. Will be used if DHCP is disabled or unavailable.rw IpAddress .1.3.6.1.4.1.18086.3080.17.153 |
pt3080CommsBackupIpMulticastAddrThe IP Multicast address for this interface.rw IpAddress .1.3.6.1.4.1.18086.3080.17.154 |
pt3080CommsBackupVlanEnableEnable/Disable VLAN on this interface.rw Enumeration .1.3.6.1.4.1.18086.3080.17.155 |
pt3080CommsBackupVlanIdVLAN ID to use on this interface, if VLAN is enabled. Please note that VLAN ID 4001 and 4002 are used for internal switching and thus cannot be used on any interface.rw Integer32 ( 1 .. 4095 ) .1.3.6.1.4.1.18086.3080.17.156 |
pt3080CommsBackupServiceSNMPEnable/Disable SNMP service on this interface.rw Enumeration .1.3.6.1.4.1.18086.3080.17.157 |
pt3080CommsBackupServiceSCPIEnable/Disable SCPI service on this interface.rw Enumeration .1.3.6.1.4.1.18086.3080.17.158 |
pt3080CommsBackupServiceTSoIPEnable/Disable TSoIP service on this interface.rw Enumeration .1.3.6.1.4.1.18086.3080.17.159 |
pt3080CommsBackupServiceWebEnable/Disable Web (http) service on this interface.rw Enumeration .1.3.6.1.4.1.18086.3080.17.160 |
pt3080CommsBackupServiceRIPEnable/Disable RIP service on this interface.rw Enumeration .1.3.6.1.4.1.18086.3080.17.161 |
pt3080CommsBackupCurrentIpAddrThe current IP address for this interface.ro IpAddress .1.3.6.1.4.1.18086.3080.17.162 |
pt3080CommsBackupCurrentNetmaskThe current IP netmask for this interface.ro IpAddress .1.3.6.1.4.1.18086.3080.17.163 |
pt3080CommsBackupIpMulticastSourceFilterAddress1The IP Multicast Source Filter address no 1 for this interface.rw IpAddress .1.3.6.1.4.1.18086.3080.17.170 |
pt3080CommsBackupIpMulticastSourceFilterAddress2The IP Multicast Source Filter address no 2 for this interface.rw IpAddress .1.3.6.1.4.1.18086.3080.17.171 |
pt3080CommsBackupIpMulticastSourceFilterAddress3The IP Multicast Source Filter address no 3 for this interface.rw IpAddress .1.3.6.1.4.1.18086.3080.17.172 |
pt3080CommsBackupIpMulticastSourceFilterAddress4The IP Multicast Source Filter address no 4 for this interface.rw IpAddress .1.3.6.1.4.1.18086.3080.17.173 |
pt3080CommsBackupIpMulticastSourceFilterAddress5The IP Multicast Source Filter address no 5 for this interface.rw IpAddress .1.3.6.1.4.1.18086.3080.17.174 |
pt3080CommsBackupIpMulticastSourceFilterAddress6The IP Multicast Source Filter address no 6 for this interface.rw IpAddress .1.3.6.1.4.1.18086.3080.17.175 |
pt3080CommsLocalIpMulticastSourceFilterModeSpecifies whether the Multicast Source Filter IP Address list is: SFINCLUDE: ONLY receive multicast frames from the source addresses in the list. SFEXCLUDE: Receive all multicast frames EXCEPT from the source addresses in the list.rw Enumeration .1.3.6.1.4.1.18086.3080.17.190 |
pt3080CommsRemoteIpMulticastSourceFilterModeSpecifies whether the Multicast Source Filter IP Address list is: SFINCLUDE: ONLY receive multicast frames from the source addresses in the list. SFEXCLUDE: Receive all multicast frames EXCEPT from the source addresses in the list.rw Enumeration .1.3.6.1.4.1.18086.3080.17.191 |
pt3080CommsGbeAdminIpMulticastSourceFilterModeSpecifies whether the Multicast Source Filter IP Address list is: SFINCLUDE: ONLY receive multicast frames from the source addresses in the list. SFEXCLUDE: Receive all multicast frames EXCEPT from the source addresses in the list.rw Enumeration .1.3.6.1.4.1.18086.3080.17.192 |
pt3080CommsBackupIpMulticastSourceFilterModeSpecifies whether the Multicast Source Filter IP Address list is: SFINCLUDE: ONLY receive multicast frames from the source addresses in the list. SFEXCLUDE: Receive all multicast frames EXCEPT from the source addresses in the list.rw Enumeration .1.3.6.1.4.1.18086.3080.17.193 |
pt3080CommsLocalIpMulticastSourceFilterAddress1The IP Multicast Source Filter address no 1 for this interface.rw IpAddress .1.3.6.1.4.1.18086.3080.17.200 |
pt3080CommsLocalIpMulticastSourceFilterAddress2The IP Multicast Source Filter address no 2 for this interface.rw IpAddress .1.3.6.1.4.1.18086.3080.17.201 |
pt3080CommsLocalIpMulticastSourceFilterAddress3The IP Multicast Source Filter address no 3 for this interface.rw IpAddress .1.3.6.1.4.1.18086.3080.17.202 |
pt3080CommsLocalIpMulticastSourceFilterAddress4The IP Multicast Source Filter address no 4 for this interface.rw IpAddress .1.3.6.1.4.1.18086.3080.17.203 |
pt3080CommsLocalIpMulticastSourceFilterAddress5The IP Multicast Source Filter address no 5 for this interface.rw IpAddress .1.3.6.1.4.1.18086.3080.17.204 |
pt3080CommsLocalIpMulticastSourceFilterAddress6The IP Multicast Source Filter address no 6 for this interface.rw IpAddress .1.3.6.1.4.1.18086.3080.17.205 |
pt3080CommsRemoteIpMulticastSourceFilterAddress1The IP Multicast Source Filter address no 1 for this interface.rw IpAddress .1.3.6.1.4.1.18086.3080.17.220 |
pt3080CommsRemoteIpMulticastSourceFilterAddress2The IP Multicast Source Filter address no 2 for this interface.rw IpAddress .1.3.6.1.4.1.18086.3080.17.221 |
pt3080CommsRemoteIpMulticastSourceFilterAddress3The IP Multicast Source Filter address no 3 for this interface.rw IpAddress .1.3.6.1.4.1.18086.3080.17.222 |
pt3080CommsRemoteIpMulticastSourceFilterAddress4The IP Multicast Source Filter address no 4 for this interface.rw IpAddress .1.3.6.1.4.1.18086.3080.17.223 |
pt3080CommsRemoteIpMulticastSourceFilterAddress5The IP Multicast Source Filter address no 5 for this interface.rw IpAddress .1.3.6.1.4.1.18086.3080.17.224 |
pt3080CommsRemoteIpMulticastSourceFilterAddress6The IP Multicast Source Filter address no 6 for this interface.rw IpAddress .1.3.6.1.4.1.18086.3080.17.225 |
pt3080CommsGbeAdminIpMulticastSourceFilterAddress1The IP Multicast Source Filter address no 1 for this interface.rw IpAddress .1.3.6.1.4.1.18086.3080.17.230 |
pt3080CommsGbeAdminIpMulticastSourceFilterAddress2The IP Multicast Source Filter address no 2 for this interface.rw IpAddress .1.3.6.1.4.1.18086.3080.17.231 |
pt3080CommsGbeAdminIpMulticastSourceFilterAddress3The IP Multicast Source Filter address no 3 for this interface.rw IpAddress .1.3.6.1.4.1.18086.3080.17.232 |
pt3080CommsGbeAdminIpMulticastSourceFilterAddress4The IP Multicast Source Filter address no 4 for this interface.rw IpAddress .1.3.6.1.4.1.18086.3080.17.233 |
pt3080CommsGbeAdminIpMulticastSourceFilterAddress5The IP Multicast Source Filter address no 5 for this interface.rw IpAddress .1.3.6.1.4.1.18086.3080.17.234 |
pt3080CommsGbeAdminIpMulticastSourceFilterAddress6The IP Multicast Source Filter address no 6 for this interface.rw IpAddress .1.3.6.1.4.1.18086.3080.17.235 |
pt3080CommsStaticRouteTableThis table contains the static routing table entries SEQUENCE OF Pt3080CommsStaticRouteEntry .1.3.6.1.4.1.18086.3080.17.300 |
pt3080CommsStaticRouteEntryAn entry for the static network routing table Pt3080CommsStaticRouteEntry .1.3.6.1.4.1.18086.3080.17.300.1 |
pt3080CommsStaticRouteNOUnique ID for this static route entry Integer32 ( 1 .. 16 ) .1.3.6.1.4.1.18086.3080.17.300.1.1 |
pt3080CommsStaticRouteTypeType of a Route table entry.rw Enumeration .1.3.6.1.4.1.18086.3080.17.300.1.2 |
pt3080CommsStaticRoutePrefixThe IP address part of prefix for a route table entry. If the address is 0.0.0.0, the entry will not be used.rw IpAddress .1.3.6.1.4.1.18086.3080.17.300.1.3 |
pt3080CommsStaticRoutePrefixSizeThe number of bits in the network part of the prefix for route table entry $. If the number is 0 (zero), the entry will not be used.rw Integer32 ( 0 .. 32 ) .1.3.6.1.4.1.18086.3080.17.300.1.4 |
pt3080CommsStaticRouteTargetThe target IP address for a route table entry. Only used if pt3080CommsStaticRouteType is normal(1) or recursive(3). If the target address is 0.0.0.0, the entry will not be used.rw IpAddress .1.3.6.1.4.1.18086.3080.17.300.1.5 |
pt3080CommsStaticRoutePhysicalInterfaceThe Physical Ethernet Interface to use for a Route table entry. Only used when pt3080CommsStaticRouteType is physicalif(2).rw Enumeration .1.3.6.1.4.1.18086.3080.17.300.1.6 |
pt3080CommsSNMPTrapDestination2The destination 2 IP address for the SNMP traps.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.17.419 |
pt3080CommsSNMPTrapDestinationPort2The UDP port number used for Trap destination 2.rw Integer32 ( 1 .. 65535 ) .1.3.6.1.4.1.18086.3080.17.420 |
pt3080CommsSNMPTrapDestination3The destination 3 IP address for the SNMP traps.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.17.779 |
pt3080CommsSNMPTrapDestinationPort3The UDP port number used for Trap destination 3.rw Integer32 ( 1 .. 65535 ) .1.3.6.1.4.1.18086.3080.17.780 |
pt3080CommsSNMPTrapDestination4The destination 4 IP address for the SNMP traps.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.17.1139 |
pt3080CommsSNMPTrapDestinationPort4The UDP port number used for Trap destination 4.rw Integer32 ( 1 .. 65535 ) .1.3.6.1.4.1.18086.3080.17.1140 |
pt3080CommsSNMPTrapDestination5The destination 5 IP address for the SNMP traps.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.17.1499 |
pt3080CommsSNMPTrapDestinationPort5The UDP port number used for Trap destination 5.rw Integer32 ( 1 .. 65535 ) .1.3.6.1.4.1.18086.3080.17.1500 |
pt3080CommsPortDhcpModeEnable/Disable DHCP client on this interface.rw Enumeration .1.3.6.1.4.1.18086.3080.17.2075 |
pt3080CommsPortPhysicalInterfaceThe Physical Ethernet Interface of this (virtual) interface.rw Enumeration .1.3.6.1.4.1.18086.3080.17.2151 |
pt3080CommsPortStaticIpAddrThe static IP address for this interface. Will be used if DHCP is disabled or unavailable.rw IpAddress .1.3.6.1.4.1.18086.3080.17.2152 |
pt3080CommsPortStaticNetmaskThe static IP netmask for this interface. Will be used if DHCP is disabled or unavailable.rw IpAddress .1.3.6.1.4.1.18086.3080.17.2153 |
pt3080CommsPortIpMulticastAddrThe IP Multicast address for this interface.rw IpAddress .1.3.6.1.4.1.18086.3080.17.2154 |
pt3080CommsPortVlanEnableEnable/Disable VLAN on this interface.rw Enumeration .1.3.6.1.4.1.18086.3080.17.2155 |
pt3080CommsPortVlanIdVLAN ID to use on this interface, if VLAN is enabled. Please note that VLAN ID 4001 and 4002 are used for internal switching and thus cannot be used on any interface.rw Integer32 ( 1 .. 4095 ) .1.3.6.1.4.1.18086.3080.17.2156 |
pt3080CommsPortServiceSNMPEnable/Disable SNMP service on this interface.rw Enumeration .1.3.6.1.4.1.18086.3080.17.2157 |
pt3080CommsPortServiceSCPIEnable/Disable SCPI service on this interface.rw Enumeration .1.3.6.1.4.1.18086.3080.17.2158 |
pt3080CommsPortServiceTSoIPEnable/Disable TSoIP service on this interface.rw Enumeration .1.3.6.1.4.1.18086.3080.17.2159 |
pt3080CommsPortServiceWebEnable/Disable Web (http) service on this interface.rw Enumeration .1.3.6.1.4.1.18086.3080.17.2160 |
pt3080CommsPortServiceRIPEnable/Disable RIP service on this interface.rw Enumeration .1.3.6.1.4.1.18086.3080.17.2161 |
pt3080CommsPortCurrentIpAddrThe current IP address for this interface.ro IpAddress .1.3.6.1.4.1.18086.3080.17.2162 |
pt3080CommsPortCurrentNetmaskThe current IP netmask for this interface.ro IpAddress .1.3.6.1.4.1.18086.3080.17.2163 |
pt3080CommsPortIpMulticastSourceFilterAddress1The IP Multicast Source Filter address no 1 for this interface.rw IpAddress .1.3.6.1.4.1.18086.3080.17.2170 |
pt3080CommsPortIpMulticastSourceFilterAddress2The IP Multicast Source Filter address no 2 for this interface.rw IpAddress .1.3.6.1.4.1.18086.3080.17.2171 |
pt3080CommsPortIpMulticastSourceFilterAddress3The IP Multicast Source Filter address no 3 for this interface.rw IpAddress .1.3.6.1.4.1.18086.3080.17.2172 |
pt3080CommsPortIpMulticastSourceFilterAddress4The IP Multicast Source Filter address no 4 for this interface.rw IpAddress .1.3.6.1.4.1.18086.3080.17.2173 |
pt3080CommsPortIpMulticastSourceFilterAddress5The IP Multicast Source Filter address no 5 for this interface.rw IpAddress .1.3.6.1.4.1.18086.3080.17.2174 |
pt3080CommsPortIpMulticastSourceFilterAddress6The IP Multicast Source Filter address no 6 for this interface.rw IpAddress .1.3.6.1.4.1.18086.3080.17.2175 |
pt3080CommsPortIpMulticastSourceFilterModeSpecifies whether the Multicast Source Filter IP Address list is: SFINCLUDE: ONLY receive multicast frames from the source addresses in the list. SFEXCLUDE: Receive all multicast frames EXCEPT from the source addresses in the list.rw Enumeration .1.3.6.1.4.1.18086.3080.17.2193 |
pt3080CommsPortEnableEnable/Disable this interface.rw Enumeration .1.3.6.1.4.1.18086.3080.17.2500 |
pt3080Demodulator OBJECT IDENTIFIER .1.3.6.1.4.1.18086.3080.24 |
pt3080DemodulatorFollowModeControls the Demodulators follow mode.rw Enumeration .1.3.6.1.4.1.18086.3080.24.1 |
pt3080Demodulator1AvailableStatus on the availability of Demodulator 1ro Enumeration .1.3.6.1.4.1.18086.3080.24.2 |
pt3080Demodulator1FWVersionDemodulator 1 firmware version stringro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.24.3 |
pt3080Demodulator1OutputTSControls which TS demodulator 1 shall outputrw Enumeration .1.3.6.1.4.1.18086.3080.24.4 |
pt3080Demodulator1MerLimitLower limit for MER Levelrw Integer32 ( 10 .. 240 ) UNITS "0.1 dBm" .1.3.6.1.4.1.18086.3080.24.5 |
pt3080Demodulator1PreVirterbiErrorRateLimitUpper limit for Pre-Virterbi Bit Error Raterw Integer32 ( 1 .. 1000000 ) .1.3.6.1.4.1.18086.3080.24.6 |
pt3080Demodulator1PostVirterbiErrorRateLimitUpper limit for Post-Virterbi Bit Error Raterw Integer32 ( 1 .. 1000000 ) .1.3.6.1.4.1.18086.3080.24.7 |
pt3080Demodulator1FelStatusReceived signal locked status on Demodulator 1ro Enumeration .1.3.6.1.4.1.18086.3080.24.8 |
pt3080Demodulator1UncorrectedPacketsNumber of uncorrected packets received in Demodulator 1 since boot or since counter was last cleared.ro Integer32 .1.3.6.1.4.1.18086.3080.24.9 |
pt3080Demodulator1MerCurrent MER level for Demodulator 1ro Integer32 UNITS "0.1 dBm" .1.3.6.1.4.1.18086.3080.24.11 |
pt3080Demodulator1PreVirterbiErrorRateCurrent Pre-Virterbi Bit Error Rate for Demodulator 1ro Integer32 UNITS "0.1 x1e-7" .1.3.6.1.4.1.18086.3080.24.12 |
pt3080Demodulator1PostVirterbiErrorRateCurrent Post-Virterbi Bit Error Rate for Demodulator 1ro Integer32 UNITS "0.1 x1e-7" .1.3.6.1.4.1.18086.3080.24.13 |
pt3080Demodulator1ActualGuardIntervalGuard Interval for the received signal on Demodulator 1ro Enumeration .1.3.6.1.4.1.18086.3080.24.14 |
pt3080Demodulator1ActualifftIFFT for the received signal on Demodulator 1ro Enumeration .1.3.6.1.4.1.18086.3080.24.15 |
pt3080Demodulator1ActualConstellationConstellation for the received signal on Demodulator 1ro Enumeration .1.3.6.1.4.1.18086.3080.24.16 |
pt3080Demodulator1ActualHierarchyHierarchy for the received signal on Demodulator 1ro Enumeration .1.3.6.1.4.1.18086.3080.24.17 |
pt3080Demodulator1ActualCodeRateHighPrioHigh Priority Code Rate for the received signal on Demodulator 1ro Enumeration .1.3.6.1.4.1.18086.3080.24.18 |
pt3080Demodulator1ActualCodeRateLowPrioHigh Priority Code Rate for the received signal on Demodulator 1ro Enumeration .1.3.6.1.4.1.18086.3080.24.19 |
pt3080Demodulator1ActualDeepInterleaverDeep Interleaver for the received signal on Demodulator 1ro Enumeration .1.3.6.1.4.1.18086.3080.24.20 |
pt3080Demodulator1ActualMpeFecHighPrioHigh Priority MPE/FEC mode for the received signal on Demodulator 1ro Enumeration .1.3.6.1.4.1.18086.3080.24.21 |
pt3080Demodulator1ActualMpeFecLowPrioLow Priority MPE/FEC mode for the received signal on Demodulator 1ro Enumeration .1.3.6.1.4.1.18086.3080.24.22 |
pt3080Demodulator1ActualTimeSlicingHighPrioHigh Priority timeslicing mode for the received signal on Demodulator 1ro Enumeration .1.3.6.1.4.1.18086.3080.24.23 |
pt3080Demodulator1ActualTimeSlicingLowPrioLow Priority timeslicing mode for the received signal on Demodulator 1ro Enumeration .1.3.6.1.4.1.18086.3080.24.24 |
pt3080Demodulator1ActualCellIDCurrent Cell ID value for the received signal on Demodulator 1ro Integer32 .1.3.6.1.4.1.18086.3080.24.25 |
pt3080Demodulator1ActualDVBHModeDVB-H mode for the received signal on Demodulator 1ro Enumeration .1.3.6.1.4.1.18086.3080.24.26 |
pt3080Demodulator2AvailableStatus on the availability of Demodulator 2ro Enumeration .1.3.6.1.4.1.18086.3080.24.29 |
pt3080Demodulator2FWVersionDemodulator 2 firmware version stringro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.24.30 |
pt3080Demodulator2OutputTSControls which TS demodulator 2 shall outputrw Enumeration .1.3.6.1.4.1.18086.3080.24.31 |
pt3080Demodulator2MerLimitLower limit for MER Levelrw Integer32 ( 10 .. 240 ) UNITS "0.1 dBm" .1.3.6.1.4.1.18086.3080.24.32 |
pt3080Demodulator2PreVirterbiErrorRateLimitUpper limit for Pre-Virterbi Bit Error Raterw Integer32 ( 1 .. 1000000 ) .1.3.6.1.4.1.18086.3080.24.33 |
pt3080Demodulator2PostVirterbiErrorRateLimitUpper limit for Post-Virterbi Bit Error Raterw Integer32 ( 1 .. 1000000 ) .1.3.6.1.4.1.18086.3080.24.34 |
pt3080Demodulator2FelStatusReceived signal locked status on Demodulator 2ro Enumeration .1.3.6.1.4.1.18086.3080.24.35 |
pt3080Demodulator2UncorrectedPacketsNumber of uncorrected packets received in Demodulator 2 since boot or since counter was last cleared.ro Integer32 .1.3.6.1.4.1.18086.3080.24.36 |
pt3080Demodulator2MerCurrent MER level for Demodulator 2ro Integer32 UNITS "0.1 dBm" .1.3.6.1.4.1.18086.3080.24.38 |
pt3080Demodulator2PreVirterbiErrorRateCurrent Pre-Virterbi Bit Error Rate for Demodulator 2ro Integer32 UNITS "0.1 x1e-7" .1.3.6.1.4.1.18086.3080.24.39 |
pt3080Demodulator2PostVirterbiErrorRateCurrent Post-Virterbi Bit Error Rate for Demodulator 2ro Integer32 UNITS "0.1 x1e-7" .1.3.6.1.4.1.18086.3080.24.40 |
pt3080Demodulator2ActualGuardIntervalGuard Interval for the received signal on Demodulator 2ro Enumeration .1.3.6.1.4.1.18086.3080.24.41 |
pt3080Demodulator2ActualifftIFFT for the received signal on Demodulator 2ro Enumeration .1.3.6.1.4.1.18086.3080.24.42 |
pt3080Demodulator2ActualConstellationConstellation for the received signal on Demodulator 2ro Enumeration .1.3.6.1.4.1.18086.3080.24.43 |
pt3080Demodulator2ActualHierarchyHierarchy for the received signal on Demodulator 2ro Enumeration .1.3.6.1.4.1.18086.3080.24.44 |
pt3080Demodulator2ActualCodeRateHighPrioHigh Priority Code Rate for the received signal on Demodulator 2ro Enumeration .1.3.6.1.4.1.18086.3080.24.45 |
pt3080Demodulator2ActualCodeRateLowPrioHigh Priority Code Rate for the received signal on Demodulator 2ro Enumeration .1.3.6.1.4.1.18086.3080.24.46 |
pt3080Demodulator2ActualDeepInterleaverDeep Interleaver for the received signal on Demodulator 2ro Enumeration .1.3.6.1.4.1.18086.3080.24.47 |
pt3080Demodulator2ActualMpeFecHighPrioHigh Priority MPE/FEC mode for the received signal on Demodulator 2ro Enumeration .1.3.6.1.4.1.18086.3080.24.48 |
pt3080Demodulator2ActualMpeFecLowPrioLow Priority MPE/FEC mode for the received signal on Demodulator 2ro Enumeration .1.3.6.1.4.1.18086.3080.24.49 |
pt3080Demodulator2ActualTimeSlicingHighPrioHigh Priority timeslicing mode for the received signal on Demodulator 2ro Enumeration .1.3.6.1.4.1.18086.3080.24.50 |
pt3080Demodulator2ActualTimeSlicingLowPrioLow Priority timeslicing mode for the received signal on Demodulator 2ro Enumeration .1.3.6.1.4.1.18086.3080.24.51 |
pt3080Demodulator2ActualCellIDCurrent Cell ID value for the received signal on Demodulator 1ro Integer32 .1.3.6.1.4.1.18086.3080.24.52 |
pt3080Demodulator2ActualDVBHModeDVB-H mode for the received signal on Demodulator 2ro Enumeration .1.3.6.1.4.1.18086.3080.24.53 |
pt3080Precorrector OBJECT IDENTIFIER .1.3.6.1.4.1.18086.3080.25 |
pt3080PrecorrectorLinearAdaptiveModeselection of the operational mode for the linear adaptive precorrector <br/>(note: legacy term used for backward compatibility. IDLE Equal to the mode named MONITORING in the WEB GUI )rw Enumeration .1.3.6.1.4.1.18086.3080.25.1 |
pt3080PrecorrectorLinearModeselection of the operational mode for the linear precorrector <br/>(note: legacy term used for backward compatibility. MONITORING Equal to the mode named BYPASS in the WEB GUI )rw Enumeration .1.3.6.1.4.1.18086.3080.25.2 |
pt3080PrecorrectorNonlinearAdaptiveModeselection of the operational mode for the non-linear adaptive precorrector <br/>(note: legacy term used for backward compatibility. IDLE Equal to the mode named MONITORING in the WEB GUI )rw Enumeration .1.3.6.1.4.1.18086.3080.25.3 |
pt3080PrecorrectorNonlinearModeselection of the operational mode for the non-linear precorrector <br/>(note: legacy term used for backward compatibility. MONITORING Equal to the mode named BYPASS in the WEB GUI )rw Enumeration .1.3.6.1.4.1.18086.3080.25.4 |
pt3080PrecorrectorLastTurnAroundTimePrecorrectorLastTurnAroundTimero Integer32 .1.3.6.1.4.1.18086.3080.25.6 |
pt3080PrecorrectorSecondsSinceLastUpdatePrecorrectorSecondsSinceLastUpdatero Integer32 .1.3.6.1.4.1.18086.3080.25.7 |
pt3080PrecorrectorLinearMonitorSenseBadCountNumber of bad/invalid sense counts, made by the linear adaptive precorrector.ro Integer32 .1.3.6.1.4.1.18086.3080.25.8 |
pt3080PrecorrectorNonlinearMonitorSenseBadCountNumber of bad/invalid sense counts, made by the nonlinear adaptive precorrector.ro Integer32 .1.3.6.1.4.1.18086.3080.25.9 |
pt3080PrecorrectorLinearAdaptiveAmplitudeRippleEnableEnable amplitude ripple as a trigger for the AUTORUN and RUNTOTARGET modesrw Enumeration .1.3.6.1.4.1.18086.3080.25.10 |
pt3080PrecorrectorLinearAdaptiveGroupDelayEnableEnable group delay as a trigger for the AUTORUN and RUNTOTARGET modesrw Enumeration .1.3.6.1.4.1.18086.3080.25.11 |
pt3080PrecorrectorNonlinearAdaptiveLowerShoulderEnableEnable shoulder level (lower) as a trigger for the AUTORUN and RUNTOTARGET modesrw Enumeration .1.3.6.1.4.1.18086.3080.25.12 |
pt3080PrecorrectorNonlinearAdaptiveUpperShoulderEnableEnable shoulder level (upper) as a trigger for the AUTORUN and RUNTOTARGET modesrw Enumeration .1.3.6.1.4.1.18086.3080.25.13 |
pt3080PrecorrectorLinearAdaptiveAmplitudeRippleTargetHysteresisDefine a adaptive target level hysteresis for the amplitude ripplerw Integer32 ( 0 .. 100000 ) UNITS "0.01 dB" .1.3.6.1.4.1.18086.3080.25.14 |
pt3080PrecorrectorLinearAdaptiveGroupDelayTargetHysteresisDefine a adaptive target level hysteresis for the group delayrw Integer32 ( 0 .. 100000 ) UNITS "0.01 ns" .1.3.6.1.4.1.18086.3080.25.15 |
pt3080PrecorrectorNonlinearAdaptiveLowerShoulderTargetHysteresisDefine a adaptive target level hysteresis for the lower shoulderrw Integer32 ( 0 .. 1000 ) UNITS "0.01 dB" .1.3.6.1.4.1.18086.3080.25.16 |
pt3080PrecorrectorNonlinearAdaptiveUpperShoulderTargetHysteresisDefine a adaptive target level hysteresis for the upper shoulderrw Integer32 ( 0 .. 1000 ) UNITS "0.01 dB" .1.3.6.1.4.1.18086.3080.25.17 |
pt3080PrecorrectorLinCleanrunPrecorrectorLinCleanrunro Integer32 .1.3.6.1.4.1.18086.3080.25.18 |
pt3080PrecorrectorLinearMonitorIterationsNumber of iterations made by the linear adaptive precorrector.ro Integer32 .1.3.6.1.4.1.18086.3080.25.19 |
pt3080PrecorrectorLinearLoadNeutralPrecorrectorLinearLoadNeutralrw Enumeration .1.3.6.1.4.1.18086.3080.25.20 |
pt3080PrecorrectorLinearLoadFactoryPrecorrectorLinearLoadFactoryrw Enumeration .1.3.6.1.4.1.18086.3080.25.21 |
pt3080PrecorrectorLinearMonitorSenseLevelLevel meassured at the linear sense input with offset defined by attenuationro Integer32 UNITS "0.1 dBm" .1.3.6.1.4.1.18086.3080.25.22 |
pt3080PrecorrectorLinearMonitorSenseValidIs linear sense input information validro Integer32 .1.3.6.1.4.1.18086.3080.25.23 |
pt3080PrecorrectorLinearMonitorStatuslinear Precor statero Enumeration .1.3.6.1.4.1.18086.3080.25.24 |
pt3080PrecorrectorLinearUpdateFactoryCurvePrecorrectorLinearUpdateFactoryCurverw Enumeration .1.3.6.1.4.1.18086.3080.25.25 |
pt3080PrecorrectorLinearMonitorAmplitudeRippleAmplitude ripplero Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.18086.3080.25.26 |
pt3080PrecorrectorLinearMonitorGroupDelayGroup delayro Integer32 UNITS "0.1 ns" .1.3.6.1.4.1.18086.3080.25.27 |
pt3080PrecorrectorNonlinearMonitorLowerShoulderLevelLower shoulder levelro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.18086.3080.25.28 |
pt3080PrecorrectorNonlinearMonitorUpperShoulderLevelUpper shoulder levelro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.18086.3080.25.29 |
pt3080PrecorrectorLinearMonitorAmplitudeRippleValidIs amplitude ripple information validro Integer32 .1.3.6.1.4.1.18086.3080.25.30 |
pt3080PrecorrectorLinearMonitorGroupDelayValidIs group delay information validro Integer32 .1.3.6.1.4.1.18086.3080.25.31 |
pt3080PrecorrectorNonlinearMonitorLowerShoulderValidIs Lower shoulder information validro Integer32 .1.3.6.1.4.1.18086.3080.25.32 |
pt3080PrecorrectorNonlinearMonitorUpperShoulderValidIs Upper shoulder information validro Integer32 .1.3.6.1.4.1.18086.3080.25.33 |
pt3080PrecorrectorNlinCleanrunPrecorrectorNlinCleanrunro Enumeration .1.3.6.1.4.1.18086.3080.25.34 |
pt3080PrecorrectorNonlinearMonitorIterationsNumber of iterations made by the nonlinear adaptive precorrector.ro Integer32 .1.3.6.1.4.1.18086.3080.25.35 |
pt3080PrecorrectorNonlinearLoadNeutralPrecorrectorNonlinearLoadNeutralrw Enumeration .1.3.6.1.4.1.18086.3080.25.36 |
pt3080PrecorrectorNonlinearLoadFactoryPrecorrectorNonlinearLoadFactoryrw Enumeration .1.3.6.1.4.1.18086.3080.25.37 |
pt3080PrecorrectorNonlinearMonitorSenseLevelLevel meassured at the Nonlinear sense input with offset defined by attenuationro Integer32 UNITS "0.1 dBm" .1.3.6.1.4.1.18086.3080.25.38 |
pt3080PrecorrectorNonlinearMonitorSenseValidIs Nonlinear sense input information validro Integer32 .1.3.6.1.4.1.18086.3080.25.39 |
pt3080PrecorrectorNonlinearMonitorStatusNonlinear Precor statero Enumeration .1.3.6.1.4.1.18086.3080.25.40 |
pt3080PrecorrectorNonlinearUpdateFactoryCurvePrecorrectorNonlinearUpdateFactoryCurverw Enumeration .1.3.6.1.4.1.18086.3080.25.41 |
pt3080PrecorrectorLinearAdaptiveAmplitudeRippleTargetLevelDefine a adaptive target level for the amplitude ripplerw Integer32 ( 0 .. 10000 ) UNITS "0.1 dB" .1.3.6.1.4.1.18086.3080.25.42 |
pt3080PrecorrectorLinearAdaptiveGroupDelayTargetLevelDefine a adaptive target level for the group delayrw Integer32 ( 0 .. 10000 ) UNITS "0.1 ns" .1.3.6.1.4.1.18086.3080.25.43 |
pt3080PrecorrectorNonlinearAdaptiveLowerShoulderTargetLevelDefine a adaptive target level for the lower shoulderrw Integer32 ( -800 .. 0 ) UNITS "0.1 dB" .1.3.6.1.4.1.18086.3080.25.44 |
pt3080PrecorrectorNonlinearAdaptiveUpperShoulderTargetLevelDefine a adaptive target level for the upper shoulderrw Integer32 ( -800 .. 0 ) UNITS "0.1 dB" .1.3.6.1.4.1.18086.3080.25.45 |
pt3080PrecorrectorLinearSenseEnableBy using this, it is possible to control wether to use the linear Sense Input or not.rw Enumeration .1.3.6.1.4.1.18086.3080.25.46 |
pt3080PrecorrectorLinearMonitorDiscartedIterationsNumber of iterations discarded by the linear adaptive precorrector due to noisy signal samples.ro Integer32 .1.3.6.1.4.1.18086.3080.25.47 |
pt3080PrecorrectorNonlinearSenseEnableBy using this, it is possible to control wether to use the nonlinear Sense Input or not.rw Enumeration .1.3.6.1.4.1.18086.3080.25.48 |
pt3080PrecorrectorNonlinearMonitorDiscartedIterationsNumber of iterations discarded by the non-linear adaptive precorrector dur to noisy signal samples.ro Integer32 .1.3.6.1.4.1.18086.3080.25.49 |
pt3080PrecorrectorNonlinearMonitorMerMERro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.18086.3080.25.50 |
pt3080PrecorrectorNonlinearMonitorMerValidIs MER information validro Integer32 .1.3.6.1.4.1.18086.3080.25.51 |
pt3080PrecorrectorNonlinearMonitorPaprPAPR levelro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.18086.3080.25.52 |
pt3080PrecorrectorNonlinearMonitorPaprValidIs Papr information validro Integer32 .1.3.6.1.4.1.18086.3080.25.53 |
pt3080PrecorrectorNonlinearAdaptiveAveragingChoose wether or not to use averaging calulationsrw Enumeration .1.3.6.1.4.1.18086.3080.25.54 |
pt3080PrecorrectorNonlinearAdaptiveMaxRfPaprEnableEnable the modulator's output PAPR limiter functionrw Enumeration .1.3.6.1.4.1.18086.3080.25.55 |
pt3080PrecorrectorNonlinearAdaptiveMaxRfPaprLimitMaximum RF PAPR Limitationrw Integer32 ( 20 .. 180 ) UNITS "0.1 dB" .1.3.6.1.4.1.18086.3080.25.56 |
pt3080PrecorrectorNonlinearAdaptiveMerTargetDefine a target level for the MERrw Integer32 ( 0 .. 800 ) UNITS "0.1 dB" .1.3.6.1.4.1.18086.3080.25.57 |
pt3080PrecorrectorNonlinearAdaptiveMerTargetHysteresisDefine a target MER hysteresisrw Integer32 ( 0 .. 1000 ) UNITS "0.01 dB" .1.3.6.1.4.1.18086.3080.25.58 |
pt3080PrecorrectorNonlinearAdaptiveMerEnableEnable MER as a trigger for the AUTORUN and RUNTOTARGET modesrw Enumeration .1.3.6.1.4.1.18086.3080.25.59 |
pt3080PrecorrectorPaprClippingset the built-in peak clipper function. The value 'max' corresponds to an unclipped COFDM signal (12dB peak to average ratio). The value 'min' correspondsto COFDM signal where all peaks >2dB above average power are clipped. When feeding the output from the modulator through an amplifier the best overall performance result is normally obtained if the clipper value used by modulator clips the signal just a fraction before the amplifier would clip the signal.rw Integer32 ( 200 .. 1200 ) UNITS "0.01 dB" .1.3.6.1.4.1.18086.3080.25.60 |
pt3080PrecorrectorPaprShapingSet the output peak shaping filter hardness. The value 'min' correspond to traditional 'hard-clipping' where the clipper noise is equally distributed below, inside and above the COFDM spectrum (clipper noise clearly visible in the form of noise above and below the spectrum. The value 'max' corresponds to maximum soft clipping where the clipper noise in the sidebands (above and below the COFDM spectrum) is subjected to maximum suppression while still maintaining the exact clipper value (peak-to-average-ration). The suppression of the sideband noise is obtained as a tradeoff against the in band performance. The clip filter setting is typically selected as a compromise between spectrum shoulder performance and in-band signal performance (MER).rw Integer32 ( 0 .. 100 ) UNITS "1 %" .1.3.6.1.4.1.18086.3080.25.61 |
pt3080PrecorrectorClipperAdaptiveModeSelection of the operational mode for the adaptive clipper functionrw Enumeration .1.3.6.1.4.1.18086.3080.25.63 |
pt3080PrecorrectorClipperMonitorStatusOptiClipper statero Enumeration .1.3.6.1.4.1.18086.3080.25.64 |
pt3080PrecorrectorClipperMonitorShoulderLevelLowerLower shoulder levelro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.18086.3080.25.65 |
pt3080PrecorrectorClipperMonitorShoulderLevelLowerValidIs Lower shoulder information validro Integer32 .1.3.6.1.4.1.18086.3080.25.66 |
pt3080PrecorrectorClipperMonitorShoulderLevelUpperUpper shoulder levelro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.18086.3080.25.67 |
pt3080PrecorrectorClipperMonitorShoulderLevelUpperValidIs Upper shoulder information validro Integer32 .1.3.6.1.4.1.18086.3080.25.68 |
pt3080PrecorrectorClipperMonitorMerMER levelro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.18086.3080.25.69 |
pt3080PrecorrectorClipperMonitorMerValidIs MER information validro Integer32 .1.3.6.1.4.1.18086.3080.25.70 |
pt3080PrecorrectorClipperMonitorPaprPAPR levelro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.18086.3080.25.71 |
pt3080PrecorrectorClipperMonitorPaprValidIs Papr information validro Integer32 .1.3.6.1.4.1.18086.3080.25.72 |
pt3080PrecorrectorClipperMonitorIterationsNumber of Iterations performed by the OptiClipper algorithmro Integer32 .1.3.6.1.4.1.18086.3080.25.73 |
pt3080PrecorrectorClipperModeSelection between no, static (manual) and adaptive clipper functionrw Enumeration .1.3.6.1.4.1.18086.3080.25.74 |
pt3080PrecorrectorClipperAdaptiveClipper shaped by the OptiClipper algorithmro Integer32 .1.3.6.1.4.1.18086.3080.25.75 |
pt3080PrecorrectorClipperEnableClipper enablero Enumeration .1.3.6.1.4.1.18086.3080.25.76 |
pt3080PrecorrectorNonlinearAttenuationDefine a attenuation level for the sense inputrw Integer32 ( -1000 .. 1000 ) UNITS "0.1 dB" .1.3.6.1.4.1.18086.3080.25.77 |
pt3080PrecorrectorLinearAttenuationDefine a attenuation level for the sense inputrw Integer32 ( -1000 .. 1000 ) UNITS "0.1 dB" .1.3.6.1.4.1.18086.3080.25.78 |
pt3080PrecorrectorLinearAdaptiveLinear precorrection curve active in the systemro Integer32 .1.3.6.1.4.1.18086.3080.25.79 |
pt3080PrecorrectorNonlinearAdaptiveNon-Linear precorrection curve active in the systemro Integer32 .1.3.6.1.4.1.18086.3080.25.80 |
pt3080PrecorrectorClipperAdaptiveShapingDepricated Therefore min and max value are set to 100% Set the peak shaping filter hardness. The value 'min' correspond to traditional 'hard-clipping' where the clipper noise is equally distributed below, inside and above the COFDM spectrum (clipper noise clearly visible in the form of noise above and below the spectrum. The value 'max' corresponds to maximum soft clipping where the clipper noise in the sidebands (above and below the COFDM spectrum) is subjected to maximum suppression while still maintaining the exact clipper value (peak-to-average-ration). The suppression of the sideband noise is obtained as a tradeoff against the in band performance. The clip filter setting is typically selected as a compromise between spectrum shoulder performance and in-band signal performance (MER).rw Integer32 ( 99 .. 100 ) UNITS "1 %" .1.3.6.1.4.1.18086.3080.25.81 |
pt3080Reception OBJECT IDENTIFIER .1.3.6.1.4.1.18086.3080.26 |
pt3080ReceptionRFFrequencyDefines the reception frequency for the tuner.rw Integer32 ( 30000000 .. 954000000 ) UNITS "1 hz" .1.3.6.1.4.1.18086.3080.26.1 |
pt3080ReceptionRFFrequencyOffsetDefines the offset to be added to the reception frequency for the tuner.rw Integer32 ( -500000 .. 500000 ) UNITS "1 hz" .1.3.6.1.4.1.18086.3080.26.2 |
pt3080ReceptionIFInputPolicyControls RF/IF reception Policyrw Enumeration .1.3.6.1.4.1.18086.3080.26.3 |
pt3080ReceptionIFFrequencyDefines the reception frequency for the tuner.rw Enumeration .1.3.6.1.4.1.18086.3080.26.4 |
pt3080ReceptionIFPolarityControls IF reception Polarityrw Enumeration .1.3.6.1.4.1.18086.3080.26.5 |
pt3080ReceptionRFSquelchEnableControls the squelch function.rw Enumeration .1.3.6.1.4.1.18086.3080.26.6 |
pt3080ReceptionRFSquelchThresholdDefines the Squelch function threshold.rw Integer32 ( -800 .. -70 ) UNITS "0.1 dBm" .1.3.6.1.4.1.18086.3080.26.7 |
pt3080ReceptionRFSquelchHysteresisDefines the Squelch function Hysteresis.rw Integer32 ( 10 .. 500 ) UNITS "0.01 dB" .1.3.6.1.4.1.18086.3080.26.8 |
pt3080ReceptionGainControlControls the gain function mode.rw Enumeration .1.3.6.1.4.1.18086.3080.26.9 |
pt3080ReceptionGainManualValueDefines manual gain value.rw Integer32 ( 0 .. 700 ) UNITS "0.1 dB" .1.3.6.1.4.1.18086.3080.26.10 |
pt3080ReceptionGainLimitEnableControls the Reception RF Gain limit function.rw Enumeration .1.3.6.1.4.1.18086.3080.26.11 |
pt3080ReceptionGainLimitDefines gain limit value.rw Integer32 ( 200 .. 700 ) UNITS "0.1 db" .1.3.6.1.4.1.18086.3080.26.12 |
pt3080ReceptionGainCurrentThe current total gain.ro Integer32 UNITS "0.01 db" .1.3.6.1.4.1.18086.3080.26.13 |
pt3080ReceptionIFRFtoIFHoldoverDelayThe holdover delay for switching reception from RF to IF input.rw Integer32 ( 0 .. 300 ) UNITS "1 secs" .1.3.6.1.4.1.18086.3080.26.18 |
pt3080ReceptionIFIFtoRFHoldoverDelayThe holdover delay for switching reception from IF to RF input.rw Integer32 ( 0 .. 300 ) UNITS "1 secs" .1.3.6.1.4.1.18086.3080.26.19 |
pt3080ReceptionIFInputShows the current RF/IF input selectedro Enumeration .1.3.6.1.4.1.18086.3080.26.20 |
pt3080ReceptionRFInputLevelThe current RF input level on the tuner.ro Integer32 UNITS "0.1 dBm" .1.3.6.1.4.1.18086.3080.26.21 |
pt3080ReceptionIFInputLevelShows the current IF input levelro Integer32 UNITS "0.01 dBm" .1.3.6.1.4.1.18086.3080.26.22 |
pt3080ReceptionBandwidthControls reception bandwidthrw Enumeration .1.3.6.1.4.1.18086.3080.26.23 |
pt3080ReceptionRFPolarityControls RF reception Polarityrw Enumeration .1.3.6.1.4.1.18086.3080.26.24 |
pt3080ReceptionRFInputLevelHysteresisDefines the Input Level Hysteresis.rw Integer32 ( 10 .. 500 ) UNITS "0.01 dB" .1.3.6.1.4.1.18086.3080.26.25 |
pt3080ReceptionRFInputLevelThresholdDefines the Input level threshold.rw Integer32 ( -8000 .. -700 ) UNITS "0.01 dBm" .1.3.6.1.4.1.18086.3080.26.26 |
pt3080ReceptionAGCModeControls the AGC function mode.rw Enumeration .1.3.6.1.4.1.18086.3080.26.30 |
pt3080ReceptionAGCHysteresisDefines the AGC function Hysteresis.rw Integer32 ( 0 .. 200 ) UNITS "0.01 dB" .1.3.6.1.4.1.18086.3080.26.31 |
pt3080ReceptionRFTrackingFilterEnableControls the Reception RF Tracking Filter.rw Enumeration .1.3.6.1.4.1.18086.3080.26.35 |
pt3080ReceptionRFifLevelThe current if level from the tuner.ro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.18086.3080.26.36 |
pt3080ReceptionRFNominalInputLevelThe nominal input level on the tuner. The dynamic range of the tuner is from 20dB below nominal level to nominal levelrw Integer32 ( -400 .. 100 ) UNITS "0.1 dBm" .1.3.6.1.4.1.18086.3080.26.37 |
pt3080ReceptionTunerHWVersionThe tuner HW version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.26.40 |
pt3080ReceptionTunerHWTypeThe tuner HW type.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.26.41 |
pt3080ReceptionTunerHWIDThe tuner HW ID.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.26.42 |
pt3080ReceptionTunerHWSerialNumberThe tuner HW Serial Number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.26.43 |
pt3080ReceptionTunerHWCalibrationDateThe tuner HW Calibration Date.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.26.44 |
pt3080ReceptionTunerHWCalibrationDataVersionThe tuner HW Calibration Data Version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.26.45 |
pt3080ReceptionTunerHWCalibrationSWVersionThe tuner HW Calibration SW Version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.26.46 |
pt3080Backplane OBJECT IDENTIFIER .1.3.6.1.4.1.18086.3080.27 |
pt3080BackplanePolarityHardMuteSet the polarity of the Hard Mute input pin on the PTT2 backplane.rw Enumeration .1.3.6.1.4.1.18086.3080.27.1 |
pt3080BackplanePolarityRFFailSet the polarity of the RF Fail output pin on the PTT2 backplane.rw Enumeration .1.3.6.1.4.1.18086.3080.27.2 |
pt3080ASI OBJECT IDENTIFIER .1.3.6.1.4.1.18086.3080.30 |
pt3080ASIInput1SyncTimeoutSpecifies the maximum time accepted between received TS packages.rw Integer32 ( 1 .. 250 ) UNITS "1 ms" .1.3.6.1.4.1.18086.3080.30.1 |
pt3080ASIInput1DataErrorLimitSpecifies the alarm limit for date error rate.rw Integer32 ( 0 .. 20000 ) UNITS "0.1 bits/s" .1.3.6.1.4.1.18086.3080.30.2 |
pt3080ASIInput1SyncStatusCurrent state of the sync detectorro Enumeration .1.3.6.1.4.1.18086.3080.30.3 |
pt3080ASIInput1SyncSignalCurrent state of the sync detector signal typero Enumeration .1.3.6.1.4.1.18086.3080.30.4 |
pt3080ASIInput1SyncTSSizeCurrent TS packet size determined by the sync detectorro Enumeration .1.3.6.1.4.1.18086.3080.30.5 |
pt3080ASIInput1LineErrorsCounts the number of line errors including IDLE stuffing.ro Integer32 UNITS "1 bits" .1.3.6.1.4.1.18086.3080.30.6 |
pt3080ASIInput1LineRateCurrent line ratero Integer32 UNITS "0.1 Mbps" .1.3.6.1.4.1.18086.3080.30.7 |
pt3080ASIInput1LineErrorRateCurrent line error ratero Integer32 UNITS "0.1 bits/s" .1.3.6.1.4.1.18086.3080.30.8 |
pt3080ASIInput1DataErrorsCounts the number of data errors excluding IDLE stuffing.ro Integer32 UNITS "1 bits" .1.3.6.1.4.1.18086.3080.30.9 |
pt3080ASIInput1DataRateCurrent data ratero Integer32 UNITS "0.1 Mbps/s" .1.3.6.1.4.1.18086.3080.30.10 |
pt3080ASIInput1DataErrorRateCurrent data error ratero Integer32 UNITS "0.1 bits/s" .1.3.6.1.4.1.18086.3080.30.11 |
pt3080ASIInput1ClearErrorCountersClear all error counters and reset all ratesrw Enumeration .1.3.6.1.4.1.18086.3080.30.12 |
pt3080ASIInput2SyncTimeoutSpecifies the maximum time accepted between received TS packages.rw Integer32 ( 1 .. 250 ) UNITS "1 ms" .1.3.6.1.4.1.18086.3080.30.51 |
pt3080ASIInput2DataErrorLimitSpecifies the alarm limit for date error rate.rw Integer32 ( 0 .. 20000 ) UNITS "0.1 bits/s" .1.3.6.1.4.1.18086.3080.30.52 |
pt3080ASIInput2SyncStatusCurrent state of the sync detectorro Enumeration .1.3.6.1.4.1.18086.3080.30.53 |
pt3080ASIInput2SyncSignalCurrent state of the sync detector signal typero Enumeration .1.3.6.1.4.1.18086.3080.30.54 |
pt3080ASIInput2SyncTSSizeCurrent TS packet size determined by the sync detectorro Enumeration .1.3.6.1.4.1.18086.3080.30.55 |
pt3080ASIInput2LineErrorsCounts the number of line errors including IDLE stuffing.ro Integer32 UNITS "1 bits" .1.3.6.1.4.1.18086.3080.30.56 |
pt3080ASIInput2LineRateCurrent line ratero Integer32 UNITS "0.1 Mbps" .1.3.6.1.4.1.18086.3080.30.57 |
pt3080ASIInput2LineErrorRateCurrent line error ratero Integer32 UNITS "0.1 bits/s" .1.3.6.1.4.1.18086.3080.30.58 |
pt3080ASIInput2DataErrorsCounts the number of data errors excluding IDLE stuffing.ro Integer32 UNITS "1 bits" .1.3.6.1.4.1.18086.3080.30.59 |
pt3080ASIInput2DataRateCurrent data ratero Integer32 UNITS "0.1 Mbps/s" .1.3.6.1.4.1.18086.3080.30.60 |
pt3080ASIInput2DataErrorRateCurrent data error ratero Integer32 UNITS "0.1 bits/s" .1.3.6.1.4.1.18086.3080.30.61 |
pt3080ASIInput2ClearErrorCountersClear all error counters and reset all ratesrw Enumeration .1.3.6.1.4.1.18086.3080.30.62 |
pt3080Notifs OBJECT IDENTIFIER .1.3.6.1.4.1.18086.3080.64 |
pt3080Notif OBJECT IDENTIFIER .1.3.6.1.4.1.18086.3080.64.0 |
pt3080NotifModulatorAlarmModulator Alarms NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.3 |
pt3080NotifTSPrimaryAlarmASI TS Primary Alarms NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.5 |
pt3080NotifTSSecondaryAlarmASI TS Secondary Alarms NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.6 |
pt3080NotifSFNAlarmSFN Alarms NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.7 |
pt3080NotifRefenceClockAlarmReference Alarms NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.8 |
pt3080NotifRFAlarmRF Alarms NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.9 |
pt3080NotifGNSSAlarmGNSS Alarms NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.10 |
pt3080NotifTSoIPAlarmTSoIP Alarms NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.12 |
pt3080NotifExternalAlarmExternal Alarms NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.13 |
pt3080NotifHWMonitorAlarmHW Monitor Alarms NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.14 |
pt3080NotifCommAlarmCommunications Alarms NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.15 |
pt3080NotifASIAlarmASI Alarms NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.16 |
pt3080NotifInternalAlarmInternal Alarms NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.18 |
pt3080NotifTSPrimarySyncLossAlarmTS Primary Sync Loss NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.21 |
pt3080NotifTSPrimarySyncErrorAlarmTS Primary Sync Error NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.22 |
pt3080NotifTSPrimaryPCRErrorAlarmTS Primary PCR Error NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.23 |
pt3080NotifTSPrimaryPATLossAlarmTS Primary PAT Loss NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.24 |
pt3080NotifTSPrimaryTSIDWrongAlarmTS Primary Transport Stream ID NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.25 |
pt3080NotifTSPrimaryNWIDWrongAlarmTS Primary Network ID NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.26 |
pt3080NotifTSPrimaryStuffingRateExceededAlarmTS Primary Stuffing Rate NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.27 |
pt3080NotifTSPrimaryBufferPoolExceededAlarmTS Primary Buffer Pool NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.28 |
pt3080NotifTSPrimarySTSJitterExceededAlarmTS Primary STS Jitter NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.29 |
pt3080NotifTSPrimaryMIPDataMissingAlarmTS Primary MIP Data Missing NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.30 |
pt3080NotifTSPrimaryMIPPriorityBadAlarmTS Primary Bad Priority in MIP NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.31 |
pt3080NotifTSSecondarySyncLossAlarmTS Secondary Sync Loss NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.32 |
pt3080NotifTSSecondarySyncErrorAlarmTS Secondary Sync Error NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.33 |
pt3080NotifTSSecondaryPCRErrorAlarmTS Secondary PCR Error NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.34 |
pt3080NotifTSSecondaryPATLossAlarmTS Secondary PAT Loss NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.35 |
pt3080NotifTSSecondaryTSIDWrongAlarmTS Secondary Transport Stream ID NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.36 |
pt3080NotifTSSecondaryNWIDWrongAlarmTS Secondary Network ID NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.37 |
pt3080NotifTSSecondaryStuffingRateExceededAlarmTS Secondary Stuffing Rate NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.38 |
pt3080NotifTSSecondaryBufferPoolExceededAlarmTS Secondary Buffer Pool NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.39 |
pt3080NotifTSSecondarySTSJitterExceededAlarmTS Secondary STS Jitter NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.40 |
pt3080NotifTSSecondaryMIPDataMissingAlarmTS Secondary MIP Data Missing NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.41 |
pt3080NotifTSSecondaryMIPPriorityBadAlarmTS Secondary Bad Priority in MIP NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.42 |
pt3080NotifRFOverloadProtectionAlarmOverload Protection NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.44 |
pt3080NotifCommeth0AlarmETH0 Conn. State NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.55 |
pt3080NotifCommeth1AlarmETH1 Conn. State NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.56 |
pt3080NotifCommeth2AlarmETH2 Conn. State NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.57 |
pt3080NotifCommeth3AlarmETH3 Conn. State NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.58 |
pt3080NotifCommeth4AlarmETH4 Conn. State NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.59 |
pt3080NotifExternalInput1AlarmAlarm Input 1 NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.72 |
pt3080NotifExternalInput2AlarmAlarm Input 2 NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.73 |
pt3080NotifExternalInput3AlarmAlarm Input 3 NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.74 |
pt3080NotifExternalInput4AlarmAlarm Input 4 NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.75 |
pt3080NotifRefenceClockExtern1PPSLossAlarmExt. 1PPS Loss NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.76 |
pt3080NotifRefenceClockIntern1PPSLossAlarmInt. 10MHz Loss NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.77 |
pt3080NotifRefenceClockExtern10MHzLossAlarmExt. 10MHz Loss NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.78 |
pt3080NotifRFAlcRangeAlarmALC Range NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.79 |
pt3080NotifSFNResyncAlarmSFN Resync Error NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.80 |
pt3080NotifSFNTSPrimaryMaxDelayOffsetExceededAlarmPrimary SFN Max Delay + Offset OOR NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.81 |
pt3080NotifSFNTSPrimaryNetworkDelayExceededAlarmPrimary SFN NW Delay Greater Than Max NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.82 |
pt3080NotifSFNTSSecondaryMaxDelayOffsetExceededAlarmSecondary SFN Max. Delay + Offset OOR NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.84 |
pt3080NotifSFNTSSecondaryNetworkDelayExceededAlarmSecondary SFN NW Delay Greater Than Max NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.85 |
pt3080NotifRFLevelOutOfRangeAlarmRF Level Out of Range NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.87 |
pt3080NotifRefenceClockNTPSyncLossAlarmNTP Sync Loss NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.89 |
pt3080NotifSFNTSPrimarySeamlessDelayTooSmallAlarmPrimary Delay Margin too Small for Seamless and Holdover NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.92 |
pt3080NotifSFNTSPrimaryMIPConfigErrorAlarmPrimary SFN and MIP Config Differ NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.93 |
pt3080NotifSFNTSSecondarySeamlessDelayTooSmallAlarmSecondary Delay Margin too Small for Seamless and Holdover NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.94 |
pt3080NotifSFNTSSecondaryMIPConfigErrorAlarmSecondary SFN and MIP Config Differ NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.95 |
pt3080NotifGNSSUnlockedAlarmGNSS Unlocked NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.98 |
pt3080NotifGNSSAntennaFaultAlarmGNSS Antenna Fault NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.107 |
pt3080NotifGNSSHoldOverAlarmGNSS Holdover NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.108 |
pt3080NotifRefenceClockExternal10MHzHoldOverAlarmExt. 10MHz Ref Holdover NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.109 |
pt3080NotifRefenceClockExternal1PPSHoldOverAlarmExt. 1PPS Ref Holdover NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.110 |
pt3080NotifASIASI1ErrorRateEceeededAlarmASI-IN1 Error Rate NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.113 |
pt3080NotifASIASI2ErrorRateEceeededAlarmASI-IN2 Error Rate NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.114 |
pt3080NotifTSoIPRx1PackageErrorRationExceededAlarmTSoIP RX1 Package Error Ratio Exceeded NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.115 |
pt3080NotifTSoIPRx2PackageErrorRationExceededAlarmTSoIP RX2 Package Error Ratio Exceeded NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.117 |
pt3080NotifTSoIPRx1SyncLossAlarmTSoIP RX1 Signal Loss NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.119 |
pt3080NotifTSoIPRx2SyncLossAlarmTSoIP RX2 Signal Loss NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.121 |
pt3080NotifInternalBackplaneAlarmBackplane Status NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.129 |
pt3080NotifInternalReferenceClockAlarmReference Status NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.132 |
pt3080NotifInternalUpConverterAlarmUpconverter Status NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.134 |
pt3080NotifInternalDownConverterAlarmDownconverter Status NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.135 |
pt3080NotifInternalMainboardAlarmMain board Status NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.136 |
pt3080NotifInternalBatteryAlarmMain Board Battery NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.137 |
pt3080NotifInternalFirmware1AlarmFirmware 1 Status NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.139 |
pt3080NotifInternalGNSSAlarmGNSS Status NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.142 |
pt3080NotifInternalSatelliteAlarmSatrecv Status NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.143 |
pt3080NotifInternalEthAlarmEtherNet Port Failure NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.146 |
pt3080NotifHWMonitorFPGAAlarmMain Board FPGA Temperature NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.156 |
pt3080NotifHWMonitorMainBoardCPUTemperatureAlarmMain Board CPU Temperature NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.157 |
pt3080NotifHWMonitorMainBoardTemperatureAlarmMain Board Temperature NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.158 |
pt3080NotifHWMonitorLeftFanAlarmLeft Chassis Fan NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.159 |
pt3080NotifHWMonitorRightFan2AlarmRight Chassis Fan NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.160 |
pt3080NotifHWMonitorBackplaneTemperatureAlarmBackplane Temperature NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.162 |
pt3080NotifTSPrimaryInputTSHoldOverAlarmInput TS Holdover NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.180 |
pt3080NotifInternalPLLUnlockedAlarmPLL Out of Lock NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.182 |
pt3080NotifExternalInput5AlarmAlarm Input 5 NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.183 |
pt3080NotifSFNUntimedModeAlarmSFN Mode Untimed NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.184 |
pt3080NotifSFNFreeRunningModeAlarmSFN Mode Free Running NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.185 |
pt3080NotifExternalInput6AlarmAlarm Input 6 NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.186 |
pt3080NotifExternalInput7AlarmAlarm Input 7 NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.187 |
pt3080NotifExternalInput8AlarmAlarm Input 8 NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.188 |
pt3080NotifTSPrimaryDelayMarginAlarmTS Primary Delay Margin NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.190 |
pt3080NotifTSSecondaryDelayMarginAlarmTS Secondary Delay Margin NOTIFICATION-TYPE .1.3.6.1.4.1.18086.3080.64.0.191 |
pt3080NotifMessageThe current alarm notification messagero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.64.1 |
pt3080NotifStateThe current alarm notification statero Enumeration .1.3.6.1.4.1.18086.3080.64.2 |
pt3080NotifLocalTimeThe time the current alarm notification state changedro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.18086.3080.64.3 |
pt3080Conformance OBJECT IDENTIFIER .1.3.6.1.4.1.18086.3080.100 |
pt3080Compliances OBJECT IDENTIFIER .1.3.6.1.4.1.18086.3080.100.1 |
pt3080ComplianceThe compliance statement for systems supporting the this MIB. Unknown .1.3.6.1.4.1.18086.3080.100.1.1 |
pt3080Groups OBJECT IDENTIFIER .1.3.6.1.4.1.18086.3080.100.2 |
pt3080SystemGroupSystem group Unknown .1.3.6.1.4.1.18086.3080.100.2.1 |
pt3080ModeGroupDVB-T Mode group Unknown .1.3.6.1.4.1.18086.3080.100.2.2 |
pt3080InputGroupInput group Unknown .1.3.6.1.4.1.18086.3080.100.2.3 |
pt3080OutputGroupOutput group Unknown .1.3.6.1.4.1.18086.3080.100.2.4 |
pt3080GpsGroupGPS group Unknown .1.3.6.1.4.1.18086.3080.100.2.7 |
pt3080ChannelFilterGroupChannel Filter group Unknown .1.3.6.1.4.1.18086.3080.100.2.8 |
pt3080TSoIPGroupTSoIP group Unknown .1.3.6.1.4.1.18086.3080.100.2.10 |
pt3080MonitorGroupSignal monitor group Unknown .1.3.6.1.4.1.18086.3080.100.2.12 |
pt3080TestGroupTest Signal group Unknown .1.3.6.1.4.1.18086.3080.100.2.13 |
pt3080AlarmGroupAlarm group Unknown .1.3.6.1.4.1.18086.3080.100.2.14 |
pt3080PresetGroupPreset group Unknown .1.3.6.1.4.1.18086.3080.100.2.15 |
pt3080EventlogGroupEventlog group Unknown .1.3.6.1.4.1.18086.3080.100.2.16 |
pt3080CommsGroupData network communications group Unknown .1.3.6.1.4.1.18086.3080.100.2.17 |
pt3080DemodulatorGroupDemodulator group Unknown .1.3.6.1.4.1.18086.3080.100.2.24 |
pt3080PrecorrectorGroupPrecorrector group Unknown .1.3.6.1.4.1.18086.3080.100.2.25 |
pt3080ReceptionGroupReception group Unknown .1.3.6.1.4.1.18086.3080.100.2.26 |
pt3080BackplaneGroupBackplane group Unknown .1.3.6.1.4.1.18086.3080.100.2.27 |
pt3080ASIGroupASI media group Unknown .1.3.6.1.4.1.18086.3080.100.2.30 |
pt3080NotifsGroupNotification objects group Unknown .1.3.6.1.4.1.18086.3080.100.2.64 |
pt3080AgentPT2080 DVB-T/H Modulator agent Unknown .1.3.6.1.4.1.18086.3080.100.3 |
pt3080NotificationsGroups OBJECT IDENTIFIER .1.3.6.1.4.1.18086.3080.100.4 |
pt3080NotifGroupModulatorAlarmModulator Alarms Unknown .1.3.6.1.4.1.18086.3080.100.4.3 |
pt3080NotifGroupTSPrimaryAlarmASI TS Primary Alarms Unknown .1.3.6.1.4.1.18086.3080.100.4.5 |
pt3080NotifGroupTSSecondaryAlarmASI TS Secondary Alarms Unknown .1.3.6.1.4.1.18086.3080.100.4.6 |
pt3080NotifGroupSFNAlarmSFN Alarms Unknown .1.3.6.1.4.1.18086.3080.100.4.7 |
pt3080NotifGroupRefenceClockAlarmReference Alarms Unknown .1.3.6.1.4.1.18086.3080.100.4.8 |
pt3080NotifGroupRFAlarmRF Alarms Unknown .1.3.6.1.4.1.18086.3080.100.4.9 |
pt3080NotifGroupGNSSAlarmGNSS Alarms Unknown .1.3.6.1.4.1.18086.3080.100.4.10 |
pt3080NotifGroupTSoIPAlarmTSoIP Alarms Unknown .1.3.6.1.4.1.18086.3080.100.4.12 |
pt3080NotifGroupExternalAlarmExternal Alarms Unknown .1.3.6.1.4.1.18086.3080.100.4.13 |
pt3080NotifGroupHWMonitorAlarmHW Monitor Alarms Unknown .1.3.6.1.4.1.18086.3080.100.4.14 |
pt3080NotifGroupCommAlarmCommunications Alarms Unknown .1.3.6.1.4.1.18086.3080.100.4.15 |
pt3080NotifGroupASIAlarmASI Alarms Unknown .1.3.6.1.4.1.18086.3080.100.4.16 |
pt3080NotifGroupInternalAlarmInternal Alarms Unknown .1.3.6.1.4.1.18086.3080.100.4.18 |