PSAX-DS2-MIB
AI MIB Summary
The PSAX-DS2-MIB module facilitates the monitoring and management of PSAX DS2 series hardware appliances, specifically tracking interface statistics, system health parameters, and protocol-specific operational states for the associated xxxx protocol implementation.
The MIB module for entities implementing the xxxx protocol.
Main OID:
psaxDS2.1.3.6.1.4.1.1751.1.1198.6.2
16
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
16 total| Object Name |
|---|
lucent OBJECT IDENTIFIER .1.3.6.1.4.1.1751 |
RFC1155-SMI Unknown .1.3.6.1.4.1.1751 |
products OBJECT IDENTIFIER .1.3.6.1.4.1.1751.1 |
softSwitch OBJECT IDENTIFIER .1.3.6.1.4.1.1751.1.1198 |
psaxDeviceServer OBJECT IDENTIFIER .1.3.6.1.4.1.1751.1.1198.6 |
psaxDS2The MIB module for entities implementing the xxxx
protocol. MODULE-IDENTITY .1.3.6.1.4.1.1751.1.1198.6.2 |
psaxSystem OBJECT IDENTIFIER .1.3.6.1.4.1.1751.1.1198.6.2.1 |
dsInfoDevice Server information. This value should
include the full name and version identification
and/or manufacturer information. It is mandatory
that this contains only printable ASCII charactersro DisplayString .1.3.6.1.4.1.1751.1.1198.6.2.1.1 |
dsProtocolInfoDevice Server PSAX/SIP stack information. This
value should include the full name and version
identification and/or manufacturer information of
the PSAX/SIP Stack used in the device server implementation.
It is mandatory that this contains only printable ASCII
charactersro DisplayString .1.3.6.1.4.1.1751.1.1198.6.2.1.2 |
logLevelDevice Server Log Level. A minimum logging level is
always set for the device servers, which logs errors
and warnings. If still more verbosity is required, that
can be done by setting this parameter to a required level.
1. Error
2. Warning
3. Inforw INTEGER ( 1..3 ) .1.3.6.1.4.1.1751.1.1198.6.2.1.3 |
succeededCallsTotal number of calls successfully made since the last
uptime of this device server.ro INTEGER ( 0..65535 ) .1.3.6.1.4.1.1751.1.1198.6.2.1.4 |
activeCallsNumber of calls which are still progressing at this time
by this device serverro INTEGER ( 0..65535 ) .1.3.6.1.4.1.1751.1.1198.6.2.1.5 |
failedCallsTotal Number of calls failed since the last uptime of
this device serverro INTEGER ( 0..65535 ) .1.3.6.1.4.1.1751.1.1198.6.2.1.6 |
reloadConfigThis is to tell the device server to load it's
configuration again. This is done when some configuration
parameters need to be updated in the systemrw INTEGER ( 0..1 ) .1.3.6.1.4.1.1751.1.1198.6.2.1.7 |
gatewayDeleteInforms the device server to delete the entry of the
gateway from the configuration filerw INTEGER( 1.. 65535) .1.3.6.1.4.1.1751.1.1198.6.2.1.8 |
resetLogTo discard previous log and to start logging afresh
resetLog would be usedrw INTEGER .1.3.6.1.4.1.1751.1.1198.6.2.1.9 |