PSAX-DS1-MIB

AI MIB Summary

The PSAX-DS1-MIB module facilitates the monitoring and management of DS1 (T1/E1) digital transmission interfaces on PSAX hardware, specifically tracking line status, error counts, and signal quality metrics. It enables administrators to retrieve performance data such as CRC errors, line code violations, and interface utilization for T1/E1 circuits.

The MIB module for entities implementing the xxxx protocol.

Main OID:

psaxDS1.1.3.6.1.4.1.1751.1.1198.6.1

Objects

Active

Status

Dependencies

Imported Objects

Objects

16 total

Object Name	Syntax	OID
lucent OBJECT IDENTIFIER `.1.3.6.1.4.1.1751`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.1751`
RFC1155-SMI Unknown `.1.3.6.1.4.1.1751`	Unknown	`.1.3.6.1.4.1.1751`
products OBJECT IDENTIFIER `.1.3.6.1.4.1.1751.1`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.1751.1`
softSwitch OBJECT IDENTIFIER `.1.3.6.1.4.1.1751.1.1198`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.1751.1.1198`
psaxDeviceServer OBJECT IDENTIFIER `.1.3.6.1.4.1.1751.1.1198.6`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.1751.1.1198.6`
psaxDS1The MIB module for entities implementing the xxxx protocol. MODULE-IDENTITY `.1.3.6.1.4.1.1751.1.1198.6.1`	MODULE-IDENTITY	`.1.3.6.1.4.1.1751.1.1198.6.1`
psaxSystem OBJECT IDENTIFIER `.1.3.6.1.4.1.1751.1.1198.6.1.1`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.1751.1.1198.6.1.1`
dsInfoDevice Server information. This value should include the full name and version identification and/or manufacturer information. It is mandatory that this contains only printable ASCII charactersro DisplayString `.1.3.6.1.4.1.1751.1.1198.6.1.1.1`	DisplayString	`.1.3.6.1.4.1.1751.1.1198.6.1.1.1`
dsProtocolInfoDevice Server PSAX/SIP stack information. This value should include the full name and version identification and/or manufacturer information of the PSAX/SIP Stack used in the device server implementation. It is mandatory that this contains only printable ASCII charactersro DisplayString `.1.3.6.1.4.1.1751.1.1198.6.1.1.2`	DisplayString	`.1.3.6.1.4.1.1751.1.1198.6.1.1.2`
logLevelDevice Server Log Level. A minimum logging level is always set for the device servers, which logs errors and warnings. If still more verbosity is required, that can be done by setting this parameter to a required level. 1. Error 2. Warning 3. Inforw INTEGER ( 1..3 ) `.1.3.6.1.4.1.1751.1.1198.6.1.1.3`	INTEGER ( 1..3 )	`.1.3.6.1.4.1.1751.1.1198.6.1.1.3`
succeededCallsTotal number of calls successfully made since the last uptime of this device server.ro INTEGER ( 0..65535 ) `.1.3.6.1.4.1.1751.1.1198.6.1.1.4`	INTEGER ( 0..65535 )	`.1.3.6.1.4.1.1751.1.1198.6.1.1.4`
activeCallsNumber of calls which are still progressing at this time by this device serverro INTEGER ( 0..65535 ) `.1.3.6.1.4.1.1751.1.1198.6.1.1.5`	INTEGER ( 0..65535 )	`.1.3.6.1.4.1.1751.1.1198.6.1.1.5`
failedCallsTotal Number of calls failed since the last uptime of this device serverro INTEGER ( 0..65535 ) `.1.3.6.1.4.1.1751.1.1198.6.1.1.6`	INTEGER ( 0..65535 )	`.1.3.6.1.4.1.1751.1.1198.6.1.1.6`
reloadConfigThis is to tell the device server to load it's configuration again. This is done when some configuration parameters need to be updated in the systemrw INTEGER ( 0..1 ) `.1.3.6.1.4.1.1751.1.1198.6.1.1.7`	INTEGER ( 0..1 )	`.1.3.6.1.4.1.1751.1.1198.6.1.1.7`
gatewayDeleteInforms the device server to delete the entry of the gateway from the configuration filerw INTEGER( 1.. 65535) `.1.3.6.1.4.1.1751.1.1198.6.1.1.8`	INTEGER( 1.. 65535)	`.1.3.6.1.4.1.1751.1.1198.6.1.1.8`
resetLogTo discard previous log and to start logging afresh resetLog would be usedrw INTEGER `.1.3.6.1.4.1.1751.1.1198.6.1.1.9`	INTEGER	`.1.3.6.1.4.1.1751.1.1198.6.1.1.9`