PSA-LIN-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for PSA-LIN-MIB.
100
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
100 total| Object Name |
|---|
fujitsu OBJECT IDENTIFIER .1.3.6.1.4.1.211 |
IMPORTS Unknown .1.3.6.1.4.1.211 |
products OBJECT IDENTIFIER .1.3.6.1.4.1.211.1 |
iaServer OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.31 |
primequest OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.31.1 |
partition OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.31.1.2 |
partitionCommon OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.31.1.2.100 |
physicalComponent OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.31.1.2.100.1 |
logicalComponentForLinux OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.31.1.2.100.2 |
linLogicalCpuInfo OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.31.1.2.100.2.1 |
linLogcalCpuTableTable with logical CPU information SEQUENCE OF LinLogicalCpu .1.3.6.1.4.1.211.1.31.1.2.100.2.1.1 |
linLogicalCpuEntry LinLogicalCpu .1.3.6.1.4.1.211.1.31.1.2.100.2.1.1.1 |
linLgCpuNumberLogical identification number that OS allots to the CPU.(index: 0based)ro INTEGER .1.3.6.1.4.1.211.1.31.1.2.100.2.1.1.1.1 |
linNumOfLogicalCpusNumber of effective logical CPUs in the partition.ro INTEGER .1.3.6.1.4.1.211.1.31.1.2.100.2.1.6 |
linLogicalMemoryInfo OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.31.1.2.100.2.2 |
linLgMemSizeMemory size of the partition.(unit:Mbyte)ro INTEGER .1.3.6.1.4.1.211.1.31.1.2.100.2.2.1 |
linLgMemSwapSizeSwap size of the partition.(unit:Mbyte)ro INTEGER .1.3.6.1.4.1.211.1.31.1.2.100.2.2.2 |
linNetworkInfo OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.31.1.2.100.2.4 |
linNetworkInterfaceTableTable with network interface information. SEQUENCE OF LinNetworkInterface .1.3.6.1.4.1.211.1.31.1.2.100.2.4.1 |
linNetworkInterfaceEntry LinNetworkInterface .1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1 |
linNIIndexNetwork inteface identification number.ro INTEGER .1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1.1 |
linNIMACAddressThe interface address of the physical layer of the network.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1.2 |
linNIIPAddressIP address of the network interface.ro OCTET STRING .1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1.3 |
linNIInterfaceNameNetwork interface name.(e.g.eth0).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1.4 |
linNISpeedNetwork speed.(unit:Mbit/s)ro INTEGER .1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1.5 |
linNISubNetMaskSubnet address of the network interface.ro OCTET STRING .1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1.6 |
linNINetworkTypeNetwork interface type. The network type definition are assigned by the IANA.ro INTEGER .1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1.7 |
linNIBusTypeBus type of the network interface. Refer to the following definitions;
value contens
0 other
1 isa
2 eisa
3 pciro INTEGER .1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1.8 |
linNISegmentSegment number of the network interface.ro INTEGER .1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1.9 |
linNIBusNumberBus number of the network interface.ro INTEGER .1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1.10 |
linNIDeviceNumberDevice number of the network interface.ro INTEGER .1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1.11 |
linNIFunctionFunction number of the network interface.ro INTEGER .1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1.12 |
linNIStatusThe current operational state of the interface.
The testing(3) state indicates that no operational packets can be passed.ro Enumeration .1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1.13 |
linNIIpPacketsInro Counter .1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1.14 |
linNIIpPacketsOutro Counter .1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1.15 |
linNILinkStatusThe current link state of the interface. If 0; link status is unknown.ro Enumeration .1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1.16 |
linNIPhysicalIDIdentification name of Network Interface cand.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1.17 |
linNIIPAddress2IP address of the network interface.
Please use this object instead of 'linNIIPAddress'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1.18 |
linNISubNetMask2Subnet address of the network interface.
Please use this object instead of 'linNISubNetMask'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1.19 |
linRoutingTableTable with routing information SEQUENCE OF LinRouting .1.3.6.1.4.1.211.1.31.1.2.100.2.4.2 |
linRoutingEntry LinRouting .1.3.6.1.4.1.211.1.31.1.2.100.2.4.2.1 |
linRTIndexRouting identification number.ro INTEGER .1.3.6.1.4.1.211.1.31.1.2.100.2.4.2.1.1 |
linRTInterfaceNameNetwork interface name.(e.g.eth0).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.211.1.31.1.2.100.2.4.2.1.2 |
linRTDestinationThe destination IP address of this route.ro OCTET STRING .1.3.6.1.4.1.211.1.31.1.2.100.2.4.2.1.3 |
linRTNextHopThe IP address of the next hop of this route.ro OCTET STRING .1.3.6.1.4.1.211.1.31.1.2.100.2.4.2.1.4 |
linRTRouteTypeThe type of route. Refer to the following definition.
Byte field Contents
0x0001 route unable
0x0002 destination is a gateway
0x0004 host entry (net otherwise)
0x0008 reinstate route after tmout
0x0010 created dyn. (by redirect)
0x0020 modified dyn. (by redirect)
0x0040 specific MTU for this route
0x0080 per route window clamping
0x0100 Initial round trip time
0x0200 Reject route
0x0400 this route isn't cachedro OCTET STRING .1.3.6.1.4.1.211.1.31.1.2.100.2.4.2.1.5 |
linRTRouteMaskIndicate the mask to be logical-ANDed with the destination address before being
compared to the value in the linRTDestination field.ro OCTET STRING .1.3.6.1.4.1.211.1.31.1.2.100.2.4.2.1.6 |
linRTDestination2The destination IP address of this route.
Please use this object instead of 'linRTDestination'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.211.1.31.1.2.100.2.4.2.1.7 |
linRTNextHop2The IP address of the next hop of this route.
Please use this object instead of 'linRTNextHop'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.211.1.31.1.2.100.2.4.2.1.8 |
linRTRouteMask2Indicate the mask to be logical-ANDed with the destination address before being
compared to the value in the linRTDestination2 field.
Please use this object instead of 'linRTRouteMask'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.211.1.31.1.2.100.2.4.2.1.9 |
linIPv6NetworkInterfaceTableTable with IPv6 network interface information. SEQUENCE OF LinIPv6NetworkInterface .1.3.6.1.4.1.211.1.31.1.2.100.2.4.3 |
linIPv6NetworkInterfaceEntry LinIPv6NetworkInterface .1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1 |
linIPv6NIIndexIPv6 Network inteface identification number.ro INTEGER .1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.1 |
linIPv6NIMACAddressThe interface address of the physical layer of the IPv6 network.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.2 |
linIPv6NIIPAddressIPv6 address of the network interface. This object returns IPv6 address of 16 bytes binary data.ro OCTET STRING .1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.3 |
linIPv6NIIPAddress2IPv6 address of the network interface. This object returns IPv6 address of text string formatro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.4 |
linIPv6NIInterfaceNameIPv6 Network interface name.(e.g.eth0).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.5 |
linIPv6NISpeedIPv6 Network speed.(unit:Mbit/s)ro INTEGER .1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.6 |
linIPv6NIPrefixIPv6 network interface prefixro INTEGER .1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.7 |
linIPv6NIScopeIPv6 network interface scope. Refer to the following definitions;
value contents
0 global
16 loopback
32 link
64 sitero INTEGER .1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.8 |
linIPv6NIDADStatusIPv6 network interface DAD Status. Refer to the following definitions;
value contents
0 The IP address is the preferred address.
4 The IP address is the optimistic address.
32 The IP address has been deprecated.
64 The DAD state is tentative.ro INTEGER .1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.9 |
linIPv6NINetworkTypeIPv6 network interface type. The network type definition are assigned by the IANA.ro INTEGER .1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.10 |
linIPv6NIBusTypeBus type of the IPv6 network interface. Refer to the following definitions;
value contens
0 other
1 isa
2 eisa
3 pciro INTEGER .1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.11 |
linIPv6NISegmentSegment number of the IPv6 network interface.ro INTEGER .1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.12 |
linIPv6NIBusNumberBus number of the IPv6 network interface.ro INTEGER .1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.13 |
linIPv6NIDeviceNumberDevice number of the IPv6 network interface.ro INTEGER .1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.14 |
linIPv6NIFunctionFunction number of the IPv6 network interface.ro INTEGER .1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.15 |
linIPv6NIStatusThe current operational state of the IPv6 interface.
The testing(3) state indicates that no operational packets can be passed.ro Enumeration .1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.16 |
linIPv6NIIpPacketsInro Counter .1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.17 |
linIPv6NIIpPacketsOutro Counter .1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.18 |
linIPv6NILinkStatusThe current link state of the IPv6 interface. If 0; link status is unknown.ro Enumeration .1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.19 |
linIPv6NIPhysicalIDIdentification name of IPv6 network interface cand.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.20 |
linHardwareResourceInfo OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.31.1.2.100.2.5 |
linHardwareResourceTable SEQUENCE OF LinHardwareResource .1.3.6.1.4.1.211.1.31.1.2.100.2.5.1 |
linHardwareResourceEntry LinHardwareResource .1.3.6.1.4.1.211.1.31.1.2.100.2.5.1.1 |
linHWRBusTypeBus type of the device. Refer to the following definitions;
value contens
0 other
1 isa
2 eisa
3 pciro INTEGER .1.3.6.1.4.1.211.1.31.1.2.100.2.5.1.1.1 |
linHWRSegmentSegment number of the device.ro INTEGER .1.3.6.1.4.1.211.1.31.1.2.100.2.5.1.1.2 |
linHWRBusNumberBus number of the device.ro INTEGER .1.3.6.1.4.1.211.1.31.1.2.100.2.5.1.1.3 |
linHWRDeviceNumberDevice number of the device.ro INTEGER .1.3.6.1.4.1.211.1.31.1.2.100.2.5.1.1.4 |
linHWRFunctionFunction number of the device.ro INTEGER .1.3.6.1.4.1.211.1.31.1.2.100.2.5.1.1.5 |
linHWRMemAreaMemory area used the device.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.211.1.31.1.2.100.2.5.1.1.6 |
linHWRIRQInterrupt number used the device.ro INTEGER .1.3.6.1.4.1.211.1.31.1.2.100.2.5.1.1.7 |
linHWRIoPortI/O port area used the device.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.211.1.31.1.2.100.2.5.1.1.8 |
linHWRAdapterNameAdapter name id of the device.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.211.1.31.1.2.100.2.5.1.1.9 |
linHWRVendorVendor id of the device.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.211.1.31.1.2.100.2.5.1.1.10 |
linHWRClassDevice classification; according to the PCI classification scheme.
Byte Contents
0 BaseClass
1 SubClass
2 ProgIfro OCTET STRING .1.3.6.1.4.1.211.1.31.1.2.100.2.5.1.1.11 |
linOperatingSystemInfo OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.31.1.2.100.2.6 |
linOSNameOperating system name that running on the partition.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.211.1.31.1.2.100.2.6.1 |
linOSVersionOperating system version that running on the partition.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.211.1.31.1.2.100.2.6.2 |
linOSRunTimeCurrent partition up time.(unit:sec)ro Counter .1.3.6.1.4.1.211.1.31.1.2.100.2.6.3 |
linOSSystemTimeCurrent date and time as visible string.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.211.1.31.1.2.100.2.6.4 |
linOSLoginCurrentValueNumber of current login users to the partition.ro INTEGER .1.3.6.1.4.1.211.1.31.1.2.100.2.6.5 |
linOSAverageUsageRateThe average system usage rate over all processors since startup.(unit:%)ro INTEGER .1.3.6.1.4.1.211.1.31.1.2.100.2.6.6 |
linOSRunlevelThe current runlevel of the partition.ro INTEGER .1.3.6.1.4.1.211.1.31.1.2.100.2.6.7 |
logicalComponentForWindows OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.31.1.2.100.3 |
monitoringFunction OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.31.1.2.100.4 |
thresholdFunction OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.31.1.2.100.5 |
statusFunction OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.31.1.2.100.6 |
otherFunction OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.31.1.2.100.7 |
pxFunction OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.31.1.2.100.8 |