PDN-UPLINK-TAGGING-MIB
The PDN-UPLINK-TAGGING-MIB manages Paradyne DSLAM hardware to configure Uplink Tagging (ULT) domains, enabling the assignment of unique VLAN IDs per subscriber port via the `Uplink Base VLAN Tag` and `Uplink Tag Index` objects. This mechanism facilitates the aggregation of subscriber traffic onto WAN uplinks by dynamically tagging ingress frames with VLAN identifiers allocated from a shared block within a multi-chassis ULT domain.
Imported Objects
Objects
13 total| Object Name |
|---|
pdnUplinkTaggingThis MIB contains objects that are used to configure Uplink Tagging (ULT).
Uplink Tagging is a term used to describe a feature that simplifies the
setup and administration of networks where a service provider wants to
use a unique VLAN per subscriber port. Ingress frames will get tagged
with a VLAN and these tagged frame will be transmitted on the uplink port
towards the WAN.
In cases where the hardware implementation permits, multiple units can be
interconnected together to form a 'Uplink Tagging Domain (ULT Domain)'. A ULT
domain is defined as the set of interconnected Paradyne DSLAMs that share a
common block of VLAN IDs. The maximum number of Paradyne DSLAMs that can be
interconnected is implementation dependent. Generally, all DSLAMs in a ULT
Domain will be configured with the same block of VLAN IDs. Each chassis/unit
will be assigned a unique ULT Index within the ULT Domain.
There are two parts of configuring Uplink Tagging:
1. Uplink Base VLAN Tag - This object specifies the beginning VLAN ID for a
particular common block of VLAN IDs. This object
will be defined as an enumeration whose values will
depend on the number of port in a chassis/unit.
2. Uplink Tag Index - This object specifies the index within some block
of VLAN IDs. Generally, this index can thought of a
chassis/unit number as can be seen with the examples
below. MODULE-IDENTITY .pdn-common.37 |
pdnUplinkTaggingObjects OBJECT IDENTIFIER .pdn-common.37.1 |
ultBaseVlanTagThis object represents Uplink Tagging base index.
This object has been deprecated. Please use an object defined
in pdnUplinkTaggingObjectsR2.rwdeprecated Enumeration .pdn-common.37.1.1 |
ultIndexThis object represents VLAN tag index which represents an
index into a block of VLAN Tags the unit will use.
This object has been deprecated. Please use pdnUltIndex, which
is more general below.rwdeprecated INTEGER .pdn-common.37.1.2 |
pdnUplinkTaggingConformance OBJECT IDENTIFIER .pdn-common.37.2 |
pdnUplinkTaggingGroups OBJECT IDENTIFIER .pdn-common.37.2.1 |
pdnUplinkTaggingCompliances OBJECT IDENTIFIER .pdn-common.37.2.2 |
pdnUplinkTaggingDeprecatedGroup OBJECT IDENTIFIER .pdn-common.37.2.3 |
pdnUplinkTaggingObjectsR2 OBJECT IDENTIFIER .pdn-common.37.3 |
pdnUltIndexThis object represents VLAN tag index which is an
index into a block of VLAN Tags the unit will use. Generally,
this can be also thought of as the chassis/unit number in the
case where multiple units are interconnected and form a
ULT Domain described above.
It is strongly encouraged that the upper limit for
a particular implementation be clearly documented in the
product's SNMP Op Spec.rw Unsigned32 .pdn-common.37.3.1 |
pdnGenUltBaseVlanTagThis object can be used to allow any Uplink
Tagging Base Index to be entered when they
don't like the 'canned' list defined in the
objects below.rw VlanId (Q-BRIDGE-MIB) .pdn-common.37.3.2 |
pdn48UltBaseVlanTagThis object represents Uplink Tagging base index which
is the starting VLAN ID for a particular common block
of VLAN IDs for chassis/units that contain 48 DSL
subscriber ports.rw Enumeration .pdn-common.37.3.3 |
pdn24UltBaseVlanTagThis object represents Uplink Tagging base index which
is the starting VLAN ID for a particular common block
of VLAN IDs for chassis/units that contain 24 DSL
subscriber ports.rw Enumeration .pdn-common.37.3.4 |
More MIBs from Default
Browse all DefaultMIBs →SNMP MIB module
The AVAYA-WLAN-MIB provides SNMP-based management and monitoring capabilities for Avaya wireless LAN infrastructure, enabling the collection of performance metrics such as access point status, client association counts, signal strength, and radio interface statistics. This module facilitates the tracking of WLAN-specific events and configuration parameters to support network availability and troubleshooting within Avaya wireless deployments.
The VMWARE-NSX-MIB enables SNMP-based monitoring and management of VMware NSX-T Data Center virtual network infrastructure, exposing metrics for logical switches, routers, distributed firewalls, and overlay tunnel states. It facilitates the tracking of Layer 2 through Layer 7 service instances, including access control lists, Quality of Service policies, and virtual network topology changes within the software-defined networking environment.
Standard SNMP MIB module defining data structures for 923switch.m.
Standard SNMP MIB module defining data structures for CTATX-MIB.
SNMP MIB module