PAIRGAIN-DS1-MIB
The PAIRGAIN-DS1-MIB provides SNMP management capabilities for PairGain T1/E1 (DS1) line interface cards within Avidia telecommunications systems, enabling the monitoring of physical layer statistics such as line status, error counts (ES, SES, UAS), and signal quality metrics.
Imported Objects
Objects
7 total| Object Name |
|---|
pgds1MibThe MIB module for managing PairGain ds1 OIDs within the Avidia System. MODULE-IDENTITY .1.3.6.1.4.1.927.1.9.17 |
pgds1MibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.927.1.9.17.1 |
pgds1ConfigTableThe pgDS1 Configuration table. SEQUENCE OF Pgds1ConfigEntry .1.3.6.1.4.1.927.1.9.17.1.1 |
pgds1ConfigEntryAn entry in the DS1 Configuration table. Pgds1ConfigEntry .1.3.6.1.4.1.927.1.9.17.1.1.1 |
pgds1LineIndexThis object should be made equal to ifIndex. The next paragraph describes its previous usage. Making the object equal to ifIndex allows proper use of ifStackTable and ds0/ds0bundle mibs. Previously, this object is the identifier of a DS1 Interface on a managed device. If there is an ifEntry that is directly associated with this and only this DS1 interface, it should have the same value as ifIndex. Otherwise, number the dsx1LineIndices with an unique identifier following the rules of choosing a number that is greater than ifNumber and numbering the inside interfaces (e.g., equipment side) with even numbers and outside interfaces (e.g, network side) with odd numbers.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.927.1.9.17.1.1.1.1 |
pgds1IfIndexThis value for this object is equal to the value of ifIndex from the Interfaces table of MIB II (RFC 1213).rodeprecated InterfaceIndex (IF-MIB) .1.3.6.1.4.1.927.1.9.17.1.1.1.2 |
pgds1LineBuildoutThe length of the ds1 line. This objects provides information for line build out circuitry. This object is only useful if the interface has configurable line build out circuitry. 0 0dB 1 -7.5dB 2 -15dB 3 -22.5dB 4 0-133ft 5 133-266ft 6 266-399ft 7 399-533ft 8 533-655ftrw INTEGER .1.3.6.1.4.1.927.1.9.17.1.1.1.3 |
More MIBs from Pairgain
Browse all PairgainMIBs →Standard SNMP MIB module defining data structures for PAIRGAIN-ETSI-HDSL-MIB.
The PAIRGAIN-SDSL-MIB enables monitoring and management of PairGain SDSL (Symmetric Digital Subscriber Line) access equipment, specifically tracking physical layer parameters such as line status, attenuation, noise margins, and data transmission rates. It provides standardized access to interface statistics, error counters, and configuration states required for maintaining SDSL circuit integrity and performance.
SNMP MIB module
PAIRGAIN-SDSLCELL-MIB provides management access to PairGain SDSL (Single Digital Subscriber Line) hardware for monitoring cell-based transmission parameters, including physical layer status, error counters, and active session statistics. This module enables the tracking of line performance metrics such as CRC errors, cell loss, and synchronization states specific to the SDSL cell architecture.
Standard SNMP MIB module defining data structures for PAIRGAIN-COMMON-HD-MIB.
Standard SNMP MIB module defining data structures for PAIRGAIN-ETHERPHONE-MIB.