PAIRGAIN-ATMTC-MIB
The PAIRGAIN-ATMTC-MIB enables monitoring and management of the ATM Traffic Control (TC) layer on PairGain ATM network equipment, specifically tracking cell transmission statistics, traffic shaping parameters, and virtual circuit (VCC) states.
Imported Objects
Objects
15 total| Object Name |
|---|
pgatmTcMIBThis module defines the ATM TC layer MIB MODULE-IDENTITY .1.3.6.1.4.1.927.1.9.16.1 |
SNMPv2-SMIThis module defines the ATM TC layer MIB Unknown .1.3.6.1.4.1.927.1.9.16.1 |
pgatmTcMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.927.1.9.16.1.1 |
pgatmTcLayerTableThis table provides one row for each port.
Each row contains the Physical Layer Parameters
table for that port. SEQUENCE OF PgatmTcLayerEntry .1.3.6.1.4.1.927.1.9.16.1.1.1 |
pgatmTcLayerEntryAn entry in the pgatmTcLayerTable. PgatmTcLayerEntry .1.3.6.1.4.1.927.1.9.16.1.1.1.1 |
pgatmTcTxCellCountTotal number of Transmitted cellsro Counter32 .1.3.6.1.4.1.927.1.9.16.1.1.1.1.1 |
pgatmTcRxCellCountTotal number of Received cellsro Counter32 .1.3.6.1.4.1.927.1.9.16.1.1.1.1.2 |
pgatmTcNonMatchCountTotal number Non-matching cellsro Counter32 .1.3.6.1.4.1.927.1.9.16.1.1.1.1.3 |
pgatmTcLOCDEventCountTotal number LOCD Eventsro Counter32 .1.3.6.1.4.1.927.1.9.16.1.1.1.1.4 |
pgatmTcCorrHECErrorTotal number corrected HEC Errorsro Counter32 .1.3.6.1.4.1.927.1.9.16.1.1.1.1.5 |
pgatmTcUnCorrHECErrorTotal number un corrected HEC Errorsro Counter32 .1.3.6.1.4.1.927.1.9.16.1.1.1.1.6 |
pgatmTcLayerModeThe state of the TC layer port
normal means operating in normal mode
loop means operation in loopback moderw Enumeration .1.3.6.1.4.1.927.1.9.16.1.1.1.1.7 |
pgatmTcScrambleoff (1) - no cell scrambling.
sss (2) - Self-Synchronizing Cell Scrambling (SSS)
dss (3) - Distributed Sampler Header Scrambling (DSS)
setting are on a per-port basis.rw Enumeration .1.3.6.1.4.1.927.1.9.16.1.1.1.1.8 |
pgatmTcClearStatsClear statistics counters to zero on this particular port.rw Enumeration .1.3.6.1.4.1.927.1.9.16.1.1.1.1.9 |
pgatmTcStatsLastClearedThe value of MIB II's sysUpTime object at the
last time these statistics were cleared.
At power on, this value should contain 0.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.927.1.9.16.1.1.1.1.10 |
More MIBs from Pairgain
Browse all PairgainMIBs →Standard SNMP MIB module defining data structures for PAIRGAIN-ETSI-HDSL-MIB.
The PAIRGAIN-SDSL-MIB enables monitoring and management of PairGain SDSL (Symmetric Digital Subscriber Line) access equipment, specifically tracking physical layer parameters such as line status, attenuation, noise margins, and data transmission rates. It provides standardized access to interface statistics, error counters, and configuration states required for maintaining SDSL circuit integrity and performance.
SNMP MIB module
PAIRGAIN-SDSLCELL-MIB provides management access to PairGain SDSL (Single Digital Subscriber Line) hardware for monitoring cell-based transmission parameters, including physical layer status, error counters, and active session statistics. This module enables the tracking of line performance metrics such as CRC errors, cell loss, and synchronization states specific to the SDSL cell architecture.
Standard SNMP MIB module defining data structures for PAIRGAIN-COMMON-HD-MIB.
Standard SNMP MIB module defining data structures for PAIRGAIN-ETHERPHONE-MIB.