Home/Catalog/OPT-IF-MIB

OPT-IF-MIB

The MIB module to describe pre-OTN and OTN interfaces. Copyright (C) The Internet Society (2003). This version of this MIB module is part of RFC 3591; see the RFC itself for full legal notices.
Main OID:
optIfMibModule.1.3.6.1.2.1.10.133
473
Objects
Active
Status
5
Dependencies

Imported Objects

SNMPv2-SMI
SNMPv2-TC
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
IF-MIB

Objects

473 total
Object Name
optIfMibModuleThe MIB module to describe pre-OTN and OTN interfaces. Copyright (C) The Internet Society (2003). This version of this MIB module is part of RFC 3591; see the RFC itself for full legal notices.
MODULE-IDENTITY
.1.3.6.1.2.1.10.133
optIfObjects
OBJECT IDENTIFIER
.1.3.6.1.2.1.10.133.1
optIfOTMn
OBJECT IDENTIFIER
.1.3.6.1.2.1.10.133.1.1
optIfOTMnTableA table of OTMn structure information.
SEQUENCE OF OptIfOTMnEntry
.1.3.6.1.2.1.10.133.1.1.1
optIfOTMnEntryA conceptual row that contains the OTMn structure information of an optical interface.
OptIfOTMnEntry
.1.3.6.1.2.1.10.133.1.1.1.1
optIfOTMnOrderThis object indicates the order of the OTM, which represents the maximum number of wavelengths that can be supported at the bit rate(s) supported on the interface.ro
Unsigned32
.1.3.6.1.2.1.10.133.1.1.1.1.1
optIfOTMnReducedThis object indicates whether a reduced or full functionality is supported at the interface. A value of true means reduced. A value of false means full.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.2.1.10.133.1.1.1.1.2
optIfOTMnBitRatesThis attribute is a bit map representing the bit rate or set of bit rates supported on the interface. The meaning of each bit position is as follows: bitRateK1(0) is set if the 2.5 Gbit/s rate is supported bitRateK2(1) is set if the 10 Gbit/s rate is supported bitRateK3(2) is set if the 40 Gbit/s rate is supported Note that each bit position corresponds to one possible value of the type OptIfBitRateK. The default value of this attribute is system specific.ro
Bits
.1.3.6.1.2.1.10.133.1.1.1.1.3
optIfOTMnInterfaceTypeThis object identifies the type of interface. The value of this attribute will affect the behavior of the OTM with respect to presence/absence of OTM Overhead Signal (OOS) processing and TCM activation. For an IrDI interface, there is no OOS processing and TCM activation is limited to n levels as specified by a TCM level threshold. This object contains two fields that are separated by whitespace. The possible values are: field 1: one of the 4-character ASCII strings 'IrDI' or 'IaDI' field 2: free-form text consisting of printable UTF-8 encoded characters Note that field 2 is optional. If it is not present then there is no requirement for trailing whitespace after field 1. The default values are as follows: field 1: 'IaDI' field 2: an empty string.ro
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.2.1.10.133.1.1.1.1.4
optIfOTMnTcmMaxThis object identifies the maximum number of TCM levels allowed for any Optical Channel contained in this OTM. A new TCM activation will be rejected if the requested level is greater than the threshold. If InterfaceType object specifies a type of 'IaDI' for this OTM, then this attribute is irrelevant. Possible values: unsigned integers in the range from 0 to 6 inclusive. Default value: 3.rw
Unsigned32
.1.3.6.1.2.1.10.133.1.1.1.1.5
optIfOTMnOpticalReachThis object indicates the length the optical signal may travel before requiring termination or regeneration. The meaning of the enumeration are: intraOffice(1) - intra-office (as defined in ITU-T G.957) shortHaul(2) - short haul (as defined in ITU-T G.957) longHaul(3) - long haul (as defined in ITU-T G.957) veryLongHaul(4) - very long haul (as defined in ITU-T G.691) ultraLongHaul(5)- ultra long haul (as defined in ITU-T G.691)ro
Enumeration
.1.3.6.1.2.1.10.133.1.1.1.1.6
optIfPerfMon
OBJECT IDENTIFIER
.1.3.6.1.2.1.10.133.1.2
optIfPerfMonIntervalTableA table of 15-minute performance monitoring interval information.
SEQUENCE OF OptIfPerfMonIntervalEntry
.1.3.6.1.2.1.10.133.1.2.1
optIfPerfMonIntervalEntryA conceptual row that contains 15-minute performance monitoring interval information of an interface.
OptIfPerfMonIntervalEntry
.1.3.6.1.2.1.10.133.1.2.1.1
optIfPerfMonCurrentTimeElapsedNumber of seconds elapsed in the current 15-minute performance monitoring interval. If, for some reason, such as an adjustment in the NE's time-of-day clock, the number of seconds elapsed exceeds the maximum value, then the maximum value will be returned.ro
Gauge32
.1.3.6.1.2.1.10.133.1.2.1.1.1
optIfPerfMonCurDayTimeElapsedNumber of seconds elapsed in the current 24-hour interval performance monitoring period. If, for some reason, such as an adjustment in the NE's time-of-day clock, the number of seconds elapsed exceeds the maximum value, then the maximum value will be returned.ro
Gauge32
.1.3.6.1.2.1.10.133.1.2.1.1.2
optIfPerfMonIntervalNumIntervalsThe number of 15-minute intervals for which performance monitoring data is available. The number is the same for all the associated sub layers of the interface. An optical interface must be capable of supporting at least n intervals, where n is defined as follows: The minimum value of n is 4. The default of n is 32. The maximum value of n is 96. The value of this object will be n unless performance monitoring was (re-)started for the interface within the last (n*15) minutes, in which case the value will be the number of complete 15-minute intervals since measurement was (re-)started.ro
Unsigned32
.1.3.6.1.2.1.10.133.1.2.1.1.3
optIfPerfMonIntervalNumInvalidIntervalsThe number of intervals in the range from 0 to optIfPerfMonIntervalNumIntervals for which no performance monitoring data is available and/or the data is invalid.ro
Unsigned32
.1.3.6.1.2.1.10.133.1.2.1.1.4
optIfOTSn
OBJECT IDENTIFIER
.1.3.6.1.2.1.10.133.1.3
optIfOTSnConfigTableA table of OTSn configuration information.
SEQUENCE OF OptIfOTSnConfigEntry
.1.3.6.1.2.1.10.133.1.3.1
optIfOTSnConfigEntryA conceptual row that contains OTSn configuration information of an interface.
OptIfOTSnConfigEntry
.1.3.6.1.2.1.10.133.1.3.1.1
optIfOTSnDirectionalityIndicates the directionality of the entity.ro
OptIfDirectionality
.1.3.6.1.2.1.10.133.1.3.1.1.1
optIfOTSnAprStatusThis attribute indicates the status of the Automatic Power Reduction (APR) function of the entity. Valid values are 'on' and 'off'.ro
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.2.1.10.133.1.3.1.1.2
optIfOTSnAprControlThis object is a UTF-8 encoded string that specifies Automatic Power Reduction (APR) control actions requested of this entity (when written) and that returns the current APR control state of this entity (when read). The values are implementation-defined. Any implementation that instantiates this object must document the set of values that it allows to be written, the set of values that it will return, and what each of those values means.rw
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.2.1.10.133.1.3.1.1.3
optIfOTSnTraceIdentifierTransmittedThe trace identifier transmitted. This object is applicable when optIfOTSnDirectionality has the value source(2) or bidirectional(3). This object does not apply to reduced-capability systems (i.e., those for which optIfOTMnReduced has the value true(1)) or at IrDI interfaces (i.e., when optIfOTMnInterfaceType field 1 has the value 'IrDI'). If no value is ever set by a management entity for the object optIfOTSnTraceIdentifierTransmitted, system-specific default value will be used. Any implementation that instantiates this object must document the system-specific default value or how it is derived.rw
OptIfTxTI
.1.3.6.1.2.1.10.133.1.3.1.1.4
optIfOTSnDAPIExpectedThe DAPI expected by the receiver. This object is applicable when optIfOTSnDirectionality has the value sink(1) or bidirectional(3). It has no effect if optIfOTSnTIMDetMode has the value off(1) or sapi(3). This object does not apply to reduced-capability systems (i.e., those for which optIfOTMnReduced has the value true(1)) or at IrDI interfaces (i.e., when optIfOTMnInterfaceType field 1 has the value 'IrDI').rw
OptIfExDAPI
.1.3.6.1.2.1.10.133.1.3.1.1.5
optIfOTSnSAPIExpectedThe SAPI expected by the receiver. This object is applicable when optIfOTSnDirectionality has the value sink(1) or bidirectional(3). It has no effect if optIfOTSnTIMDetMode has the value off(1) or dapi(2). This object does not apply to reduced-capability systems (i.e., those for which optIfOTMnReduced has the value true(1)) or at IrDI interfaces (i.e., when optIfOTMnInterfaceType field 1 has the value 'IrDI').rw
OptIfExSAPI
.1.3.6.1.2.1.10.133.1.3.1.1.6
optIfOTSnTraceIdentifierAcceptedThe actual trace identifier received. This object is applicable when optIfOTSnDirectionality has the value sink(1) or bidirectional(3). Its value is unspecified if optIfOTSnCurrentStatus has either or both of the losO(5) and los(6) bits set. This object does not apply to reduced-capability systems (i.e., those for which optIfOTMnReduced has the value true(1)) or at IrDI interfaces (i.e., when optIfOTMnInterfaceType field 1 has the value 'IrDI').ro
OptIfAcTI
.1.3.6.1.2.1.10.133.1.3.1.1.7
optIfOTSnTIMDetModeIndicates the mode of the Trace Identifier Mismatch (TIM) Detection function. This object is applicable when optIfOTSnDirectionality has the value sink(1) or bidirectional(3). The default value is off(1). This object does not apply to reduced-capability systems (i.e., those for which optIfOTMnReduced has the value true(1)) or at IrDI interfaces (i.e., when optIfOTMnInterfaceType field 1 has the value 'IrDI'). The default value of this object is off(1).rw
OptIfTIMDetMode
.1.3.6.1.2.1.10.133.1.3.1.1.8
optIfOTSnTIMActEnabledIndicates whether the Trace Identifier Mismatch (TIM) Consequent Action function is enabled. This object is applicable when optIfOTSnDirectionality has the value sink(1) or bidirectional(3). It has no effect when the value of optIfOTSnTIMDetMode is off(1). This object does not apply to reduced-capability systems (i.e., those for which optIfOTMnReduced has the value true(1)) or at IrDI interfaces (i.e., when optIfOTMnInterfaceType field 1 has the value 'IrDI'). The default value of this object is false(2).rw
TruthValue (SNMPv2-TC)
.1.3.6.1.2.1.10.133.1.3.1.1.9
optIfOTSnCurrentStatusIndicates the defect condition of the entity, if any. This object is applicable when optIfOTSnDirectionality has the value sink(1) or bidirectional(3). In reduced-capability systems or at IrDI interfaces the only bit position that may be set is los(6).ro
Bits
.1.3.6.1.2.1.10.133.1.3.1.1.10
optIfOTSnSinkCurrentTableA table of OTSn sink performance monitoring information for the current 15-minute interval.
SEQUENCE OF OptIfOTSnSinkCurrentEntry
.1.3.6.1.2.1.10.133.1.3.2
optIfOTSnSinkCurrentEntryA conceptual row that contains OTSn sink performance monitoring information of an interface for the current 15-minute interval.
OptIfOTSnSinkCurrentEntry
.1.3.6.1.2.1.10.133.1.3.2.1
optIfOTSnSinkCurrentSuspectedFlagIf true, the data in this entry may be unreliable.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.2.1.10.133.1.3.2.1.1
optIfOTSnSinkCurrentInputPowerThe optical power monitored at the input.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.3.2.1.2
optIfOTSnSinkCurrentLowInputPowerThe lowest optical power monitored at the input during the current 15-minute interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.3.2.1.3
optIfOTSnSinkCurrentHighInputPowerThe highest optical power monitored at the input during the current 15-minute interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.3.2.1.4
optIfOTSnSinkCurrentLowerInputPowerThresholdThe lower limit threshold on input power. If optIfOTSnSinkCurrentInputPower drops to this value or below, a Threshold Crossing Alert (TCA) should be sent.rw
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.3.2.1.5
optIfOTSnSinkCurrentUpperInputPowerThresholdThe upper limit threshold on input power. If optIfOTSnSinkCurrentInputPower reaches or exceeds this value, a Threshold Crossing Alert (TCA) should be sent.rw
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.3.2.1.6
optIfOTSnSinkCurrentOutputPowerThe optical power monitored at the output.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.3.2.1.7
optIfOTSnSinkCurrentLowOutputPowerThe lowest optical power monitored at the output during the current 15-minute interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.3.2.1.8
optIfOTSnSinkCurrentHighOutputPowerThe highest optical power monitored at the output during the current 15-minute interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.3.2.1.9
optIfOTSnSinkCurrentLowerOutputPowerThresholdThe lower limit threshold on output power. If optIfOTSnSinkCurrentOutputPower drops to this value or below, a Threshold Crossing Alert (TCA) should be sent.rw
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.3.2.1.10
optIfOTSnSinkCurrentUpperOutputPowerThresholdThe upper limit threshold on output power. If optIfOTSnSinkCurrentOutputPower reaches or exceeds this value, a Threshold Crossing Alert (TCA) should be sent.rw
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.3.2.1.11
optIfOTSnSinkIntervalTableA table of historical OTSn sink performance monitoring information.
SEQUENCE OF OptIfOTSnSinkIntervalEntry
.1.3.6.1.2.1.10.133.1.3.3
optIfOTSnSinkIntervalEntryA conceptual row that contains OTSn sink performance monitoring information of an interface during a particular historical interval.
OptIfOTSnSinkIntervalEntry
.1.3.6.1.2.1.10.133.1.3.3.1
optIfOTSnSinkIntervalNumberUniquely identifies the interval.
OptIfIntervalNumber
.1.3.6.1.2.1.10.133.1.3.3.1.1
optIfOTSnSinkIntervalSuspectedFlagIf true, the data in this entry may be unreliable.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.2.1.10.133.1.3.3.1.2
optIfOTSnSinkIntervalLastInputPowerThe last optical power monitored at the input during the interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.3.3.1.3
optIfOTSnSinkIntervalLowInputPowerThe lowest optical power monitored at the input during the interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.3.3.1.4
optIfOTSnSinkIntervalHighInputPowerThe highest optical power monitored at the input during the interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.3.3.1.5
optIfOTSnSinkIntervalLastOutputPowerThe last optical power monitored at the output during the interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.3.3.1.6
optIfOTSnSinkIntervalLowOutputPowerThe lowest optical power monitored at the output during the interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.3.3.1.7
optIfOTSnSinkIntervalHighOutputPowerThe highest optical power monitored at the output during the interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.3.3.1.8
optIfOTSnSinkCurDayTableA table of OTSn sink performance monitoring information for the current 24-hour interval.
SEQUENCE OF OptIfOTSnSinkCurDayEntry
.1.3.6.1.2.1.10.133.1.3.4
optIfOTSnSinkCurDayEntryA conceptual row that contains OTSn sink performance monitoring information of an interface for the current 24-hour interval.
OptIfOTSnSinkCurDayEntry
.1.3.6.1.2.1.10.133.1.3.4.1
optIfOTSnSinkCurDaySuspectedFlagIf true, the data in this entry may be unreliable.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.2.1.10.133.1.3.4.1.1
optIfOTSnSinkCurDayLowInputPowerThe lowest optical power monitored at the input during the current 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.3.4.1.2
optIfOTSnSinkCurDayHighInputPowerThe highest optical power monitored at the input during the current 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.3.4.1.3
optIfOTSnSinkCurDayLowOutputPowerThe lowest optical power monitored at the output during the current 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.3.4.1.4
optIfOTSnSinkCurDayHighOutputPowerThe highest optical power monitored at the output during the current 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.3.4.1.5
optIfOTSnSinkPrevDayTableA table of OTSn sink performance monitoring information for the previous 24-hour interval.
SEQUENCE OF OptIfOTSnSinkPrevDayEntry
.1.3.6.1.2.1.10.133.1.3.5
optIfOTSnSinkPrevDayEntryA conceptual row that contains OTSn sink performance monitoring information of an interface for the previous 24-hour interval.
OptIfOTSnSinkPrevDayEntry
.1.3.6.1.2.1.10.133.1.3.5.1
optIfOTSnSinkPrevDaySuspectedFlagIf true, the data in this entry may be unreliable.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.2.1.10.133.1.3.5.1.1
optIfOTSnSinkPrevDayLastInputPowerThe last optical power monitored at the input during the previous 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.3.5.1.2
optIfOTSnSinkPrevDayLowInputPowerThe lowest optical power monitored at the input during the previous 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.3.5.1.3
optIfOTSnSinkPrevDayHighInputPowerThe highest optical power monitored at the input during the previous 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.3.5.1.4
optIfOTSnSinkPrevDayLastOutputPowerThe last optical power monitored at the output during the previous 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.3.5.1.5
optIfOTSnSinkPrevDayLowOutputPowerThe lowest optical power monitored at the output during the previous 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.3.5.1.6
optIfOTSnSinkPrevDayHighOutputPowerThe highest optical power monitored at the output during the previous 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.3.5.1.7
optIfOTSnSrcCurrentTableA table of OTSn source performance monitoring information for the current 15-minute interval.
SEQUENCE OF OptIfOTSnSrcCurrentEntry
.1.3.6.1.2.1.10.133.1.3.6
optIfOTSnSrcCurrentEntryA conceptual row that contains OTSn source performance monitoring information of an interface for the current 15-minute interval.
OptIfOTSnSrcCurrentEntry
.1.3.6.1.2.1.10.133.1.3.6.1
optIfOTSnSrcCurrentSuspectedFlagIf true, the data in this entry may be unreliable.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.2.1.10.133.1.3.6.1.1
optIfOTSnSrcCurrentOutputPowerThe optical power monitored at the output.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.3.6.1.2
optIfOTSnSrcCurrentLowOutputPowerThe lowest optical power monitored at the output during the current 15-minute interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.3.6.1.3
optIfOTSnSrcCurrentHighOutputPowerThe highest optical power monitored at the output during the current 15-minute interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.3.6.1.4
optIfOTSnSrcCurrentLowerOutputPowerThresholdThe lower limit threshold on output power. If optIfOTSnSrcCurrentOutputPower drops to this value or below, a Threshold Crossing Alert (TCA) should be sent.rw
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.3.6.1.5
optIfOTSnSrcCurrentUpperOutputPowerThresholdThe upper limit threshold on output power. If optIfOTSnSrcCurrentOutputPower reaches or exceeds this value, a Threshold Crossing Alert (TCA) should be sent.rw
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.3.6.1.6
optIfOTSnSrcCurrentInputPowerThe optical power monitored at the input.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.3.6.1.7
optIfOTSnSrcCurrentLowInputPowerThe lowest optical power monitored at the input during the current 15-minute interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.3.6.1.8
optIfOTSnSrcCurrentHighInputPowerThe highest optical power monitored at the input during the current 15-minute interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.3.6.1.9
optIfOTSnSrcCurrentLowerInputPowerThresholdThe lower limit threshold on input power. If optIfOTSnSrcCurrentInputPower drops to this value or below, a Threshold Crossing Alert (TCA) should be sent.rw
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.3.6.1.10
optIfOTSnSrcCurrentUpperInputPowerThresholdThe upper limit threshold on input power. If optIfOTSnSrcCurrentInputPower reaches or exceeds this value, a Threshold Crossing Alert (TCA) should be sent.rw
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.3.6.1.11
optIfOTSnSrcIntervalTableA table of historical OTSn source performance monitoring information.
SEQUENCE OF OptIfOTSnSrcIntervalEntry
.1.3.6.1.2.1.10.133.1.3.7
optIfOTSnSrcIntervalEntryA conceptual row that contains OTSn source performance monitoring information of an interface during a particular historical interval.
OptIfOTSnSrcIntervalEntry
.1.3.6.1.2.1.10.133.1.3.7.1
optIfOTSnSrcIntervalNumberUniquely identifies the interval.
OptIfIntervalNumber
.1.3.6.1.2.1.10.133.1.3.7.1.1
optIfOTSnSrcIntervalSuspectedFlagIf true, the data in this entry may be unreliable.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.2.1.10.133.1.3.7.1.2
optIfOTSnSrcIntervalLastOutputPowerThe last optical power monitored at the output during the interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.3.7.1.3
optIfOTSnSrcIntervalLowOutputPowerThe lowest optical power monitored at the output during the interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.3.7.1.4
optIfOTSnSrcIntervalHighOutputPowerThe highest optical power monitored at the output during the interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.3.7.1.5
optIfOTSnSrcIntervalLastInputPowerThe last optical power monitored at the input during the interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.3.7.1.6
optIfOTSnSrcIntervalLowInputPowerThe lowest optical power monitored at the input during the interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.3.7.1.7
optIfOTSnSrcIntervalHighInputPowerThe highest optical power monitored at the input during the interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.3.7.1.8
optIfOTSnSrcCurDayTableA table of OTSn source performance monitoring information for the current 24-hour interval.
SEQUENCE OF OptIfOTSnSrcCurDayEntry
.1.3.6.1.2.1.10.133.1.3.8
optIfOTSnSrcCurDayEntryA conceptual row that contains OTSn source performance monitoring information of an interface for the current 24-hour interval.
OptIfOTSnSrcCurDayEntry
.1.3.6.1.2.1.10.133.1.3.8.1
optIfOTSnSrcCurDaySuspectedFlagIf true, the data in this entry may be unreliable.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.2.1.10.133.1.3.8.1.1
optIfOTSnSrcCurDayLowOutputPowerThe lowest optical power monitored at the output during the current 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.3.8.1.2
optIfOTSnSrcCurDayHighOutputPowerThe highest optical power monitored at the output during the current 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.3.8.1.3
optIfOTSnSrcCurDayLowInputPowerThe lowest optical power monitored at the input during the current 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.3.8.1.4
optIfOTSnSrcCurDayHighInputPowerThe highest optical power monitored at the input during the current 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.3.8.1.5
optIfOTSnSrcPrevDayTableA table of OTSn source performance monitoring information for the previous 24-hour interval.
SEQUENCE OF OptIfOTSnSrcPrevDayEntry
.1.3.6.1.2.1.10.133.1.3.9
optIfOTSnSrcPrevDayEntryA conceptual row that contains OTSn source performance monitoring information of an interface for the previous 24-hour interval.
OptIfOTSnSrcPrevDayEntry
.1.3.6.1.2.1.10.133.1.3.9.1
optIfOTSnSrcPrevDaySuspectedFlagIf true, the data in this entry may be unreliable.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.2.1.10.133.1.3.9.1.1
optIfOTSnSrcPrevDayLastOutputPowerThe last optical power monitored at the output during the previous 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.3.9.1.2
optIfOTSnSrcPrevDayLowOutputPowerThe lowest optical power monitored at the output during the previous 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.3.9.1.3
optIfOTSnSrcPrevDayHighOutputPowerThe highest optical power monitored at the output during the previous 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.3.9.1.4
optIfOTSnSrcPrevDayLastInputPowerThe last optical power monitored at the input during the previous 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.3.9.1.5
optIfOTSnSrcPrevDayLowInputPowerThe lowest optical power monitored at the input during the previous 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.3.9.1.6
optIfOTSnSrcPrevDayHighInputPowerThe highest optical power monitored at the input during the previous 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.3.9.1.7
optIfOMSn
OBJECT IDENTIFIER
.1.3.6.1.2.1.10.133.1.4
optIfOMSnConfigTableA table of OMSn configuration information.
SEQUENCE OF OptIfOMSnConfigEntry
.1.3.6.1.2.1.10.133.1.4.1
optIfOMSnConfigEntryA conceptual row that contains OMSn configuration information of an interface.
OptIfOMSnConfigEntry
.1.3.6.1.2.1.10.133.1.4.1.1
optIfOMSnDirectionalityIndicates the directionality of the entity.ro
OptIfDirectionality
.1.3.6.1.2.1.10.133.1.4.1.1.1
optIfOMSnCurrentStatusIndicates the defect condition of the entity, if any. This object is applicable only to full capability systems whose interface type is IaDI and for which optIfOMSnDirectionality has the value sink(1) or bidirectional(3).ro
Bits
.1.3.6.1.2.1.10.133.1.4.1.1.2
optIfOMSnSinkCurrentTableA table of OMSn sink performance monitoring information for the current 15-minute interval.
SEQUENCE OF OptIfOMSnSinkCurrentEntry
.1.3.6.1.2.1.10.133.1.4.2
optIfOMSnSinkCurrentEntryA conceptual row that contains OMSn sink performance monitoring information of an interface for the current 15-minute interval.
OptIfOMSnSinkCurrentEntry
.1.3.6.1.2.1.10.133.1.4.2.1
optIfOMSnSinkCurrentSuspectedFlagIf true, the data in this entry may be unreliable.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.2.1.10.133.1.4.2.1.1
optIfOMSnSinkCurrentAggregatedInputPowerThe aggregated optical power of all the DWDM input channels.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.4.2.1.2
optIfOMSnSinkCurrentLowAggregatedInputPowerThe lowest aggregated optical power of all the DWDM input channels during the current 15-minute interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.4.2.1.3
optIfOMSnSinkCurrentHighAggregatedInputPowerThe highest aggregated optical power of all the DWDM input channels during the current 15-minute interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.4.2.1.4
optIfOMSnSinkCurrentLowerInputPowerThresholdThe lower limit threshold on aggregated input power. If optIfOMSnSinkCurrentAggregatedInputPower drops to this value or below, a Threshold Crossing Alert (TCA) should be sent.rw
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.4.2.1.5
optIfOMSnSinkCurrentUpperInputPowerThresholdThe upper limit threshold on aggregated input power. If optIfOMSnSinkCurrentAggregatedInputPower reaches or exceeds this value, a Threshold Crossing Alert (TCA) should be sent.rw
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.4.2.1.6
optIfOMSnSinkCurrentOutputPowerThe optical power monitored at the output.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.4.2.1.7
optIfOMSnSinkCurrentLowOutputPowerThe lowest optical power monitored at the output during the current 15-minute interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.4.2.1.8
optIfOMSnSinkCurrentHighOutputPowerThe highest optical power monitored at the output during the current 15-minute interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.4.2.1.9
optIfOMSnSinkCurrentLowerOutputPowerThresholdThe lower limit threshold on output power. If optIfOMSnSinkCurrentOutputPower drops to this value or below, a Threshold Crossing Alert (TCA) should be sent.rw
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.4.2.1.10
optIfOMSnSinkCurrentUpperOutputPowerThresholdThe upper limit threshold on output power. If optIfOMSnSinkCurrentOutputPower reaches or exceeds this value, a Threshold Crossing Alert (TCA) should be sent.rw
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.4.2.1.11
optIfOMSnSinkIntervalTableA table of historical OMSn sink performance monitoring information.
SEQUENCE OF OptIfOMSnSinkIntervalEntry
.1.3.6.1.2.1.10.133.1.4.3
optIfOMSnSinkIntervalEntryA conceptual row that contains OMSn sink performance monitoring information of an interface during a particular historical interval.
OptIfOMSnSinkIntervalEntry
.1.3.6.1.2.1.10.133.1.4.3.1
optIfOMSnSinkIntervalNumberUniquely identifies the interval.
OptIfIntervalNumber
.1.3.6.1.2.1.10.133.1.4.3.1.1
optIfOMSnSinkIntervalSuspectedFlagIf true, the data in this entry may be unreliable.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.2.1.10.133.1.4.3.1.2
optIfOMSnSinkIntervalLastAggregatedInputPowerThe last aggregated optical power of all the DWDM input channels during the interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.4.3.1.3
optIfOMSnSinkIntervalLowAggregatedInputPowerThe lowest aggregated optical power of all the DWDM input channels during the interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.4.3.1.4
optIfOMSnSinkIntervalHighAggregatedInputPowerThe highest aggregated optical power of all the DWDM input channels during the interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.4.3.1.5
optIfOMSnSinkIntervalLastOutputPowerThe last optical power at the output during the interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.4.3.1.6
optIfOMSnSinkIntervalLowOutputPowerThe lowest optical power at the output during the interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.4.3.1.7
optIfOMSnSinkIntervalHighOutputPowerThe highest optical power at the output during the interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.4.3.1.8
optIfOMSnSinkCurDayTableA table of OMSn sink performance monitoring information for the current 24-hour interval.
SEQUENCE OF OptIfOMSnSinkCurDayEntry
.1.3.6.1.2.1.10.133.1.4.4
optIfOMSnSinkCurDayEntryA conceptual row that contains OMSn sink performance monitoring information of an interface for the current 24-hour interval.
OptIfOMSnSinkCurDayEntry
.1.3.6.1.2.1.10.133.1.4.4.1
optIfOMSnSinkCurDaySuspectedFlagIf true, the data in this entry may be unreliable.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.2.1.10.133.1.4.4.1.1
optIfOMSnSinkCurDayLowAggregatedInputPowerThe lowest aggregated optical power of all the DWDM input channels during the current 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.4.4.1.2
optIfOMSnSinkCurDayHighAggregatedInputPowerThe highest aggregated optical power of all the DWDM input channels during the current 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.4.4.1.3
optIfOMSnSinkCurDayLowOutputPowerThe lowest optical power at the output during the current 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.4.4.1.4
optIfOMSnSinkCurDayHighOutputPowerThe highest optical power at the output during the current 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.4.4.1.5
optIfOMSnSinkPrevDayTableA table of OMSn sink performance monitoring information for the previous 24-hour interval.
SEQUENCE OF OptIfOMSnSinkPrevDayEntry
.1.3.6.1.2.1.10.133.1.4.5
optIfOMSnSinkPrevDayEntryA conceptual row that contains OMSn sink performance monitoring information of an interface for the previous 24-hour interval.
OptIfOMSnSinkPrevDayEntry
.1.3.6.1.2.1.10.133.1.4.5.1
optIfOMSnSinkPrevDaySuspectedFlagIf true, the data in this entry may be unreliable.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.2.1.10.133.1.4.5.1.1
optIfOMSnSinkPrevDayLastAggregatedInputPowerThe last aggregated optical power of all the DWDM input channels during the previous 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.4.5.1.2
optIfOMSnSinkPrevDayLowAggregatedInputPowerThe lowest aggregated optical power of all the DWDM input channels during the previous 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.4.5.1.3
optIfOMSnSinkPrevDayHighAggregatedInputPowerThe highest aggregated optical power of all the DWDM input channels during the previous 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.4.5.1.4
optIfOMSnSinkPrevDayLastOutputPowerThe last optical power at the output during the previous 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.4.5.1.5
optIfOMSnSinkPrevDayLowOutputPowerThe lowest optical power at the output during the previous 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.4.5.1.6
optIfOMSnSinkPrevDayHighOutputPowerThe highest optical power at the output during the previous 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.4.5.1.7
optIfOMSnSrcCurrentTableA table of OMSn source performance monitoring information for the current 15-minute interval.
SEQUENCE OF OptIfOMSnSrcCurrentEntry
.1.3.6.1.2.1.10.133.1.4.6
optIfOMSnSrcCurrentEntryA conceptual row that contains OMSn source performance monitoring information of an interface for the current 15-minute interval.
OptIfOMSnSrcCurrentEntry
.1.3.6.1.2.1.10.133.1.4.6.1
optIfOMSnSrcCurrentSuspectedFlagIf true, the data in this entry may be unreliable.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.2.1.10.133.1.4.6.1.1
optIfOMSnSrcCurrentOutputPowerThe optical power monitored at the output.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.4.6.1.2
optIfOMSnSrcCurrentLowOutputPowerThe lowest optical power monitored at the output during the current 15-minute interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.4.6.1.3
optIfOMSnSrcCurrentHighOutputPowerThe highest optical power monitored at the output during the current 15-minute interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.4.6.1.4
optIfOMSnSrcCurrentLowerOutputPowerThresholdThe lower limit threshold on output power. If optIfOMSnSrcCurrentOutputPower drops to this value or below, a Threshold Crossing Alert (TCA) should be sent.rw
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.4.6.1.5
optIfOMSnSrcCurrentUpperOutputPowerThresholdThe upper limit threshold on output power. If optIfOMSnSrcCurrentOutputPower reaches or exceeds this value, a Threshold Crossing Alert (TCA) should be sent.rw
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.4.6.1.6
optIfOMSnSrcCurrentAggregatedInputPowerThe aggregated optical power at the input.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.4.6.1.7
optIfOMSnSrcCurrentLowAggregatedInputPowerThe lowest aggregated optical power at the input during the current 15-minute interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.4.6.1.8
optIfOMSnSrcCurrentHighAggregatedInputPowerThe highest aggregated optical power at the input during the current 15-minute interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.4.6.1.9
optIfOMSnSrcCurrentLowerInputPowerThresholdThe lower limit threshold on aggregated input power. If optIfOMSnSrcCurrentAggregatedInputPower drops to this value or below, a Threshold Crossing Alert (TCA) should be sent.rw
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.4.6.1.10
optIfOMSnSrcCurrentUpperInputPowerThresholdThe upper limit threshold on aggregated input power. If optIfOMSnSrcCurrentAggregatedInputPower reaches or exceeds this value, a Threshold Crossing Alert (TCA) should be sent.rw
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.4.6.1.11
optIfOMSnSrcIntervalTableA table of historical OMSn source performance monitoring information.
SEQUENCE OF OptIfOMSnSrcIntervalEntry
.1.3.6.1.2.1.10.133.1.4.7
optIfOMSnSrcIntervalEntryA conceptual row that contains OMSn source performance monitoring information of an interface during a particular historical interval.
OptIfOMSnSrcIntervalEntry
.1.3.6.1.2.1.10.133.1.4.7.1
optIfOMSnSrcIntervalNumberUniquely identifies the interval.
OptIfIntervalNumber
.1.3.6.1.2.1.10.133.1.4.7.1.1
optIfOMSnSrcIntervalSuspectedFlagIf true, the data in this entry may be unreliable.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.2.1.10.133.1.4.7.1.2
optIfOMSnSrcIntervalLastOutputPowerThe last optical power monitored at the output during the interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.4.7.1.3
optIfOMSnSrcIntervalLowOutputPowerThe lowest optical power monitored at the output during the interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.4.7.1.4
optIfOMSnSrcIntervalHighOutputPowerThe highest optical power monitored at the output during the interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.4.7.1.5
optIfOMSnSrcIntervalLastAggregatedInputPowerThe last aggregated optical power at the input during the interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.4.7.1.6
optIfOMSnSrcIntervalLowAggregatedInputPowerThe lowest aggregated optical power at the input during the interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.4.7.1.7
optIfOMSnSrcIntervalHighAggregatedInputPowerThe highest aggregated optical power at the input during the interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.4.7.1.8
optIfOMSnSrcCurDayTableA table of OMSn source performance monitoring information for the current 24-hour interval.
SEQUENCE OF OptIfOMSnSrcCurDayEntry
.1.3.6.1.2.1.10.133.1.4.8
optIfOMSnSrcCurDayEntryA conceptual row that contains OMSn source performance monitoring information of an interface for the current 24-hour interval.
OptIfOMSnSrcCurDayEntry
.1.3.6.1.2.1.10.133.1.4.8.1
optIfOMSnSrcCurDaySuspectedFlagIf true, the data in this entry may be unreliable.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.2.1.10.133.1.4.8.1.1
optIfOMSnSrcCurDayLowOutputPowerThe lowest optical power monitored at the output during the current 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.4.8.1.2
optIfOMSnSrcCurDayHighOutputPowerThe highest optical power monitored at the output during the current 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.4.8.1.3
optIfOMSnSrcCurDayLowAggregatedInputPowerThe lowest aggregated optical power at the input during the current 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.4.8.1.4
optIfOMSnSrcCurDayHighAggregatedInputPowerThe highest aggregated optical power at the input during the current 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.4.8.1.5
optIfOMSnSrcPrevDayTableA table of OMSn source performance monitoring information for the previous 24-hour interval.
SEQUENCE OF OptIfOMSnSrcPrevDayEntry
.1.3.6.1.2.1.10.133.1.4.9
optIfOMSnSrcPrevDayEntryA conceptual row that contains OMSn source performance monitoring information of an interface for the previous 24-hour interval.
OptIfOMSnSrcPrevDayEntry
.1.3.6.1.2.1.10.133.1.4.9.1
optIfOMSnSrcPrevDaySuspectedFlagIf true, the data in this entry may be unreliable.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.2.1.10.133.1.4.9.1.1
optIfOMSnSrcPrevDayLastOutputPowerThe last optical power monitored at the output during the previous 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.4.9.1.2
optIfOMSnSrcPrevDayLowOutputPowerThe lowest optical power monitored at the output during the previous 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.4.9.1.3
optIfOMSnSrcPrevDayHighOutputPowerThe highest optical power monitored at the output during the previous 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.4.9.1.4
optIfOMSnSrcPrevDayLastAggregatedInputPowerThe last aggregated optical power at the input during the previous 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.4.9.1.5
optIfOMSnSrcPrevDayLowAggregatedInputPowerThe lowest aggregated optical power at the input during the previous 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.4.9.1.6
optIfOMSnSrcPrevDayHighAggregatedInputPowerThe highest aggregated optical power at the input during the previous 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.4.9.1.7
optIfOChGroup
OBJECT IDENTIFIER
.1.3.6.1.2.1.10.133.1.5
optIfOChGroupConfigTableA table of OChGroup configuration information.
SEQUENCE OF OptIfOChGroupConfigEntry
.1.3.6.1.2.1.10.133.1.5.1
optIfOChGroupConfigEntryA conceptual row that contains OChGroup configuration information of an interface.
OptIfOChGroupConfigEntry
.1.3.6.1.2.1.10.133.1.5.1.1
optIfOChGroupDirectionalityIndicates the directionality of the entity.ro
OptIfDirectionality
.1.3.6.1.2.1.10.133.1.5.1.1.1
optIfOChGroupSinkCurrentTableA table of OChGroup sink performance monitoring information for the current 15-minute interval.
SEQUENCE OF OptIfOChGroupSinkCurrentEntry
.1.3.6.1.2.1.10.133.1.5.2
optIfOChGroupSinkCurrentEntryA conceptual row that contains OChGroup sink performance monitoring information of an interface for the current 15-minute interval.
OptIfOChGroupSinkCurrentEntry
.1.3.6.1.2.1.10.133.1.5.2.1
optIfOChGroupSinkCurrentSuspectedFlagIf true, the data in this entry may be unreliable.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.2.1.10.133.1.5.2.1.1
optIfOChGroupSinkCurrentAggregatedInputPowerThe aggregated optical power of all the DWDM input channels in the OChGroup.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.5.2.1.2
optIfOChGroupSinkCurrentLowAggregatedInputPowerThe lowest aggregated optical power of all the DWDM input channels in the OChGroup during the current 15-minute interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.5.2.1.3
optIfOChGroupSinkCurrentHighAggregatedInputPowerThe highest aggregated optical power of all the DWDM input channels in the OChGroup during the current 15-minute interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.5.2.1.4
optIfOChGroupSinkCurrentLowerInputPowerThresholdThe lower limit threshold on aggregated input power. If optIfOChGroupSinkCurrentAggregatedInputPower drops to this value or below, a Threshold Crossing Alert (TCA) should be sent.rw
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.5.2.1.5
optIfOChGroupSinkCurrentUpperInputPowerThresholdThe upper limit threshold on aggregated input power. If optIfOChGroupSinkCurrentAggregatedInputPower reaches or exceeds this value, a Threshold Crossing Alert (TCA) should be sent.rw
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.5.2.1.6
optIfOChGroupSinkCurrentOutputPowerThe optical power monitored at the output in the OChGroup.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.5.2.1.7
optIfOChGroupSinkCurrentLowOutputPowerThe lowest optical power monitored at the output in the OChGroup during the current 15-minute interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.5.2.1.8
optIfOChGroupSinkCurrentHighOutputPowerThe highest optical power monitored at the output in the OChGroup during the current 15-minute interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.5.2.1.9
optIfOChGroupSinkCurrentLowerOutputPowerThresholdThe lower limit threshold on the output power. If optIfOChGroupSinkCurrentOutputPower drops to this value or below, a Threshold Crossing Alert (TCA) should be sent.rw
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.5.2.1.10
optIfOChGroupSinkCurrentUpperOutputPowerThresholdThe upper limit threshold on the output power. If optIfOChGroupSinkCurrentOutputPower reaches or exceeds this value, a Threshold Crossing Alert (TCA) should be sent.rw
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.5.2.1.11
optIfOChGroupSinkIntervalTableA table of historical OChGroup sink performance monitoring information.
SEQUENCE OF OptIfOChGroupSinkIntervalEntry
.1.3.6.1.2.1.10.133.1.5.3
optIfOChGroupSinkIntervalEntryA conceptual row that contains OChGroup sink performance monitoring information of an interface during a particular historical interval.
OptIfOChGroupSinkIntervalEntry
.1.3.6.1.2.1.10.133.1.5.3.1
optIfOChGroupSinkIntervalNumberUniquely identifies the interval.
OptIfIntervalNumber
.1.3.6.1.2.1.10.133.1.5.3.1.1
optIfOChGroupSinkIntervalSuspectedFlagIf true, the data in this entry may be unreliable.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.2.1.10.133.1.5.3.1.2
optIfOChGroupSinkIntervalLastAggregatedInputPowerThe last aggregated optical power of all the DWDM input channels in the OChGroup during the interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.5.3.1.3
optIfOChGroupSinkIntervalLowAggregatedInputPowerThe lowest aggregated optical power of all the DWDM input channels in the OChGroup during the interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.5.3.1.4
optIfOChGroupSinkIntervalHighAggregatedInputPowerThe highest aggregated optical power of all the DWDM input channels in the OChGroup during the interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.5.3.1.5
optIfOChGroupSinkIntervalLastOutputPowerThe last optical power monitored at the output in the OChGroup during the interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.5.3.1.6
optIfOChGroupSinkIntervalLowOutputPowerThe lowest optical power monitored at the output in the OChGroup during the interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.5.3.1.7
optIfOChGroupSinkIntervalHighOutputPowerThe highest optical power monitored at the output in the OChGroup during the interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.5.3.1.8
optIfOChGroupSinkCurDayTableA table of OChGroup sink performance monitoring information for the current 24-hour interval.
SEQUENCE OF OptIfOChGroupSinkCurDayEntry
.1.3.6.1.2.1.10.133.1.5.4
optIfOChGroupSinkCurDayEntryA conceptual row that contains OChGroup sink performance monitoring information of an interface for the current 24-hour interval.
OptIfOChGroupSinkCurDayEntry
.1.3.6.1.2.1.10.133.1.5.4.1
optIfOChGroupSinkCurDaySuspectedFlagIf true, the data in this entry may be unreliable.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.2.1.10.133.1.5.4.1.1
optIfOChGroupSinkCurDayLowAggregatedInputPowerThe lowest aggregated optical power of all the DWDM input channels in the OChGroup during the current 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.5.4.1.2
optIfOChGroupSinkCurDayHighAggregatedInputPowerThe highest aggregated optical power of all the DWDM input channels in the OChGroup during the current 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.5.4.1.3
optIfOChGroupSinkCurDayLowOutputPowerThe lowest optical power monitored at the output in the OChGroup during the current 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.5.4.1.4
optIfOChGroupSinkCurDayHighOutputPowerThe highest optical power monitored at the output in the OChGroup during the current 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.5.4.1.5
optIfOChGroupSinkPrevDayTableA table of OChGroup sink performance monitoring information for the previous 24-hour interval.
SEQUENCE OF OptIfOChGroupSinkPrevDayEntry
.1.3.6.1.2.1.10.133.1.5.5
optIfOChGroupSinkPrevDayEntryA conceptual row that contains OChGroup sink performance monitoring information of an interface for the previous 24-hour interval.
OptIfOChGroupSinkPrevDayEntry
.1.3.6.1.2.1.10.133.1.5.5.1
optIfOChGroupSinkPrevDaySuspectedFlagIf true, the data in this entry may be unreliable.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.2.1.10.133.1.5.5.1.1
optIfOChGroupSinkPrevDayLastAggregatedInputPowerThe last aggregated optical power of all the DWDM input channels in the OChGroup during the previous 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.5.5.1.2
optIfOChGroupSinkPrevDayLowAggregatedInputPowerThe lowest aggregated optical power of all the DWDM input channels in the OChGroup during the previous 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.5.5.1.3
optIfOChGroupSinkPrevDayHighAggregatedInputPowerThe highest aggregated optical power of all the DWDM input channels in the OChGroup during the previous 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.5.5.1.4
optIfOChGroupSinkPrevDayLastOutputPowerThe last optical power monitored at the output in the OChGroup during the previous 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.5.5.1.5
optIfOChGroupSinkPrevDayLowOutputPowerThe lowest optical power monitored at the output in the OChGroup during the previous 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.5.5.1.6
optIfOChGroupSinkPrevDayHighOutputPowerThe highest optical power monitored at the output in the OChGroup during the previous 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.5.5.1.7
optIfOChGroupSrcCurrentTableA table of OChGroup source performance monitoring information for the current 15-minute interval.
SEQUENCE OF OptIfOChGroupSrcCurrentEntry
.1.3.6.1.2.1.10.133.1.5.6
optIfOChGroupSrcCurrentEntryA conceptual row that contains OChGroup source performance monitoring information of an interface for the current 15-minute interval.
OptIfOChGroupSrcCurrentEntry
.1.3.6.1.2.1.10.133.1.5.6.1
optIfOChGroupSrcCurrentSuspectedFlagIf true, the data in this entry may be unreliable.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.2.1.10.133.1.5.6.1.1
optIfOChGroupSrcCurrentOutputPowerThe optical power monitored at the output.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.5.6.1.2
optIfOChGroupSrcCurrentLowOutputPowerThe lowest optical power monitored at the output during the current 15-minute interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.5.6.1.3
optIfOChGroupSrcCurrentHighOutputPowerThe highest optical power monitored at the output during the current 15-minute interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.5.6.1.4
optIfOChGroupSrcCurrentLowerOutputPowerThresholdThe lower limit threshold on output power. If optIfOChGroupSrcCurrentOutputPower drops to this value or below, a Threshold Crossing Alert (TCA) should be sent.rw
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.5.6.1.5
optIfOChGroupSrcCurrentUpperOutputPowerThresholdThe upper limit threshold on output power. If optIfOChGroupSrcCurrentOutputPower reaches or exceeds this value, a Threshold Crossing Alert (TCA) should be sent.rw
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.5.6.1.6
optIfOChGroupSrcCurrentAggregatedInputPowerThe aggregated optical power monitored at the input.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.5.6.1.7
optIfOChGroupSrcCurrentLowAggregatedInputPowerThe lowest aggregated optical power monitored at the input during the current 15-minute interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.5.6.1.8
optIfOChGroupSrcCurrentHighAggregatedInputPowerThe highest aggregated optical power monitored at the input during the current 15-minute interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.5.6.1.9
optIfOChGroupSrcCurrentLowerInputPowerThresholdThe lower limit threshold on input power. If optIfOChGroupSrcCurrentAggregatedInputPower drops to this value or below, a Threshold Crossing Alert (TCA) should be sent.rw
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.5.6.1.10
optIfOChGroupSrcCurrentUpperInputPowerThresholdThe upper limit threshold on input power. If optIfOChGroupSrcCurrentAggregatedInputPower reaches or exceeds this value, a Threshold Crossing Alert (TCA) should be sent.rw
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.5.6.1.11
optIfOChGroupSrcIntervalTableA table of historical OChGroup source performance monitoring information.
SEQUENCE OF OptIfOChGroupSrcIntervalEntry
.1.3.6.1.2.1.10.133.1.5.7
optIfOChGroupSrcIntervalEntryA conceptual row that contains OChGroup source performance monitoring information of an interface during a particular historical interval.
OptIfOChGroupSrcIntervalEntry
.1.3.6.1.2.1.10.133.1.5.7.1
optIfOChGroupSrcIntervalNumberUniquely identifies the interval.
OptIfIntervalNumber
.1.3.6.1.2.1.10.133.1.5.7.1.1
optIfOChGroupSrcIntervalSuspectedFlagIf true, the data in this entry may be unreliable.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.2.1.10.133.1.5.7.1.2
optIfOChGroupSrcIntervalLastOutputPowerThe last optical power monitored at the output during the interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.5.7.1.3
optIfOChGroupSrcIntervalLowOutputPowerThe lowest optical power monitored at the output during the interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.5.7.1.4
optIfOChGroupSrcIntervalHighOutputPowerThe highest optical power monitored at the output during the interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.5.7.1.5
optIfOChGroupSrcIntervalLastAggregatedInputPowerThe last aggregated optical power monitored at the input during the interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.5.7.1.6
optIfOChGroupSrcIntervalLowAggregatedInputPowerThe lowest aggregated optical power monitored at the input during the interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.5.7.1.7
optIfOChGroupSrcIntervalHighAggregatedInputPowerThe highest aggregated optical power monitored at the input during the interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.5.7.1.8
optIfOChGroupSrcCurDayTableA table of OChGroup source performance monitoring information for the current 24-hour interval.
SEQUENCE OF OptIfOChGroupSrcCurDayEntry
.1.3.6.1.2.1.10.133.1.5.8
optIfOChGroupSrcCurDayEntryA conceptual row that contains OChGroup source performance monitoring information of an interface for the current 24-hour interval.
OptIfOChGroupSrcCurDayEntry
.1.3.6.1.2.1.10.133.1.5.8.1
optIfOChGroupSrcCurDaySuspectedFlagIf true, the data in this entry may be unreliable.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.2.1.10.133.1.5.8.1.1
optIfOChGroupSrcCurDayLowOutputPowerThe lowest optical power monitored at the output during the current 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.5.8.1.2
optIfOChGroupSrcCurDayHighOutputPowerThe highest optical power monitored at the output during the current 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.5.8.1.3
optIfOChGroupSrcCurDayLowAggregatedInputPowerThe lowest aggregated optical power monitored at the input during the current 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.5.8.1.4
optIfOChGroupSrcCurDayHighAggregatedInputPowerThe highest aggregated optical power monitored at the input during the current 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.5.8.1.5
optIfOChGroupSrcPrevDayTableA table of OChGroup source performance monitoring information for the previous 24-hour interval.
SEQUENCE OF OptIfOChGroupSrcPrevDayEntry
.1.3.6.1.2.1.10.133.1.5.9
optIfOChGroupSrcPrevDayEntryA conceptual row that contains OChGroup source performance monitoring information of an interface for the previous 24-hour interval.
OptIfOChGroupSrcPrevDayEntry
.1.3.6.1.2.1.10.133.1.5.9.1
optIfOChGroupSrcPrevDaySuspectedFlagIf true, the data in this entry may be unreliable.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.2.1.10.133.1.5.9.1.1
optIfOChGroupSrcPrevDayLastOutputPowerThe last optical power monitored at the output during the previous 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.5.9.1.2
optIfOChGroupSrcPrevDayLowOutputPowerThe lowest optical power monitored at the output during the previous 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.5.9.1.3
optIfOChGroupSrcPrevDayHighOutputPowerThe highest optical power monitored at the output during the previous 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.5.9.1.4
optIfOChGroupSrcPrevDayLastAggregatedInputPowerThe last aggregated optical power monitored at the input during the previous 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.5.9.1.5
optIfOChGroupSrcPrevDayLowAggregatedInputPowerThe lowest aggregated optical power monitored at the input during the previous 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.5.9.1.6
optIfOChGroupSrcPrevDayHighAggregatedInputPowerThe highest aggregated optical power monitored at the input during the previous 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.5.9.1.7
optIfOCh
OBJECT IDENTIFIER
.1.3.6.1.2.1.10.133.1.6
optIfOChConfigTableA table of OCh configuration information.
SEQUENCE OF OptIfOChConfigEntry
.1.3.6.1.2.1.10.133.1.6.1
optIfOChConfigEntryA conceptual row that contains OCh configuration information of an interface.
OptIfOChConfigEntry
.1.3.6.1.2.1.10.133.1.6.1.1
optIfOChDirectionalityIndicates the directionality of the entity.ro
OptIfDirectionality
.1.3.6.1.2.1.10.133.1.6.1.1.1
optIfOChCurrentStatusIndicates the defect condition of the entity, if any. This object is applicable when optIfOChDirectionality has the value sink(1) or bidirectional(3). In full-capability systems the bit position los(1) is not used. In reduced-capability systems or at IrDI interfaces only the bit positions los(1) and ssfP(3) are used.ro
Bits
.1.3.6.1.2.1.10.133.1.6.1.1.2
optIfOChSinkCurrentTableA table of OCh sink performance monitoring information for the current 15-minute interval.
SEQUENCE OF OptIfOChSinkCurrentEntry
.1.3.6.1.2.1.10.133.1.6.2
optIfOChSinkCurrentEntryA conceptual row that contains OCh sink performance monitoring information for an interface for the current 15-minute interval.
OptIfOChSinkCurrentEntry
.1.3.6.1.2.1.10.133.1.6.2.1
optIfOChSinkCurrentSuspectedFlagIf true, the data in this entry may be unreliable.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.2.1.10.133.1.6.2.1.1
optIfOChSinkCurrentInputPowerThe optical power monitored at the input.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.6.2.1.2
optIfOChSinkCurrentLowInputPowerThe lowest optical power monitored at the input during the current 15-minute interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.6.2.1.3
optIfOChSinkCurrentHighInputPowerThe highest optical power monitored at the input during the current 15-minute interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.6.2.1.4
optIfOChSinkCurrentLowerInputPowerThresholdThe lower limit threshold on input power. If optIfOChSinkCurrentInputPower drops to this value or below, a Threshold Crossing Alert (TCA) should be sent.rw
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.6.2.1.5
optIfOChSinkCurrentUpperInputPowerThresholdThe upper limit threshold on input power. If optIfOChSinkCurrentInputPower reaches or exceeds this value, a Threshold Crossing Alert (TCA) should be sent.rw
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.6.2.1.6
optIfOChSinkIntervalTableA table of historical OCh sink performance monitoring information.
SEQUENCE OF OptIfOChSinkIntervalEntry
.1.3.6.1.2.1.10.133.1.6.3
optIfOChSinkIntervalEntryA conceptual row that contains OCh sink performance monitoring information of an interface during a particular historical interval.
OptIfOChSinkIntervalEntry
.1.3.6.1.2.1.10.133.1.6.3.1
optIfOChSinkIntervalNumberUniquely identifies the interval.
OptIfIntervalNumber
.1.3.6.1.2.1.10.133.1.6.3.1.1
optIfOChSinkIntervalSuspectedFlagIf true, the data in this entry may be unreliable.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.2.1.10.133.1.6.3.1.2
optIfOChSinkIntervalLastInputPowerThe last optical power monitored at the input during the interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.6.3.1.3
optIfOChSinkIntervalLowInputPowerThe lowest optical power monitored at the input during the interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.6.3.1.4
optIfOChSinkIntervalHighInputPowerThe highest optical power monitored at the input during the interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.6.3.1.5
optIfOChSinkCurDayTableA table of OCh sink performance monitoring information for the current 24-hour interval.
SEQUENCE OF OptIfOChSinkCurDayEntry
.1.3.6.1.2.1.10.133.1.6.4
optIfOChSinkCurDayEntryA conceptual row that contains OCh sink performance monitoring information of an interface for the current 24-hour interval.
OptIfOChSinkCurDayEntry
.1.3.6.1.2.1.10.133.1.6.4.1
optIfOChSinkCurDaySuspectedFlagIf true, the data in this entry may be unreliable.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.2.1.10.133.1.6.4.1.1
optIfOChSinkCurDayLowInputPowerThe lowest optical power monitored at the input during the current 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.6.4.1.2
optIfOChSinkCurDayHighInputPowerThe highest optical power monitored at the input during the current 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.6.4.1.3
optIfOChSinkPrevDayTableA table of OCh sink performance monitoring information for the previous 24-hour interval.
SEQUENCE OF OptIfOChSinkPrevDayEntry
.1.3.6.1.2.1.10.133.1.6.5
optIfOChSinkPrevDayEntryA conceptual row that contains OCh sink performance monitoring information of an interface for the previous 24-hour interval.
OptIfOChSinkPrevDayEntry
.1.3.6.1.2.1.10.133.1.6.5.1
optIfOChSinkPrevDaySuspectedFlagIf true, the data in this entry may be unreliable.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.2.1.10.133.1.6.5.1.1
optIfOChSinkPrevDayLastInputPowerThe last optical power monitored at the input during the previous 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.6.5.1.2
optIfOChSinkPrevDayLowInputPowerThe lowest optical power monitored at the input during the previous 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.6.5.1.3
optIfOChSinkPrevDayHighInputPowerThe highest optical power monitored at the input during the previous 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.6.5.1.4
optIfOChSrcCurrentTableA table of OCh source performance monitoring information for the current 15-minute interval.
SEQUENCE OF OptIfOChSrcCurrentEntry
.1.3.6.1.2.1.10.133.1.6.6
optIfOChSrcCurrentEntryA conceptual row that contains OCh source performance monitoring information of an interface for the current 15-minute interval.
OptIfOChSrcCurrentEntry
.1.3.6.1.2.1.10.133.1.6.6.1
optIfOChSrcCurrentSuspectedFlagIf true, the data in this entry may be unreliable.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.2.1.10.133.1.6.6.1.1
optIfOChSrcCurrentOutputPowerThe optical power monitored at the output.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.6.6.1.2
optIfOChSrcCurrentLowOutputPowerThe lowest optical power monitored at the output during the current 15-minute interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.6.6.1.3
optIfOChSrcCurrentHighOutputPowerThe highest optical power monitored at the output during the current 15-minute interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.6.6.1.4
optIfOChSrcCurrentLowerOutputPowerThresholdThe lower limit threshold on output power. If optIfOChSrcCurrentOutputPower drops to this value or below, a Threshold Crossing Alert (TCA) should be sent.rw
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.6.6.1.5
optIfOChSrcCurrentUpperOutputPowerThresholdThe upper limit threshold on output power. If optIfOChSrcCurrentOutputPower reaches or exceeds this value, a Threshold Crossing Alert (TCA) should be sent.rw
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.6.6.1.6
optIfOChSrcIntervalTableA table of historical OCh source performance monitoring information.
SEQUENCE OF OptIfOChSrcIntervalEntry
.1.3.6.1.2.1.10.133.1.6.7
optIfOChSrcIntervalEntryA conceptual row that contains OCh source performance monitoring information of an interface during a particular historical interval.
OptIfOChSrcIntervalEntry
.1.3.6.1.2.1.10.133.1.6.7.1
optIfOChSrcIntervalNumberUniquely identifies the interval.
OptIfIntervalNumber
.1.3.6.1.2.1.10.133.1.6.7.1.1
optIfOChSrcIntervalSuspectedFlagIf true, the data in this entry may be unreliable.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.2.1.10.133.1.6.7.1.2
optIfOChSrcIntervalLastOutputPowerThe last optical power monitored at the output during the interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.6.7.1.3
optIfOChSrcIntervalLowOutputPowerThe lowest optical power monitored at the output during the interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.6.7.1.4
optIfOChSrcIntervalHighOutputPowerThe highest optical power monitored at the output during the interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.6.7.1.5
optIfOChSrcCurDayTableA table of OCh source performance monitoring information for the current 24-hour interval.
SEQUENCE OF OptIfOChSrcCurDayEntry
.1.3.6.1.2.1.10.133.1.6.8
optIfOChSrcCurDayEntryA conceptual row that contains OCh source performance monitoring information of an interface for the current 24-hour interval.
OptIfOChSrcCurDayEntry
.1.3.6.1.2.1.10.133.1.6.8.1
optIfOChSrcCurDaySuspectedFlagIf true, the data in this entry may be unreliable.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.2.1.10.133.1.6.8.1.1
optIfOChSrcCurDayLowOutputPowerThe lowest optical power monitored at the output during the current 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.6.8.1.2
optIfOChSrcCurDayHighOutputPowerThe highest optical power monitored at the output during the current 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.6.8.1.3
optIfOChSrcPrevDayTableA table of OCh source performance monitoring information for the previous 24-hour interval.
SEQUENCE OF OptIfOChSrcPrevDayEntry
.1.3.6.1.2.1.10.133.1.6.9
optIfOChSrcPrevDayEntryA conceptual row that contains OCh source performance monitoring information of an interface for the previous 24-hour interval.
OptIfOChSrcPrevDayEntry
.1.3.6.1.2.1.10.133.1.6.9.1
optIfOChSrcPrevDaySuspectedFlagIf true, the data in this entry may be unreliable.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.2.1.10.133.1.6.9.1.1
optIfOChSrcPrevDayLastOutputPowerThe last optical power monitored at the output during the previous 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.6.9.1.2
optIfOChSrcPrevDayLowOutputPowerThe lowest optical power monitored at the output during the previous 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.6.9.1.3
optIfOChSrcPrevDayHighOutputPowerThe highest optical power monitored at the output during the previous 24-hour interval.ro
Integer32 UNITS "0.1 dbm"
.1.3.6.1.2.1.10.133.1.6.9.1.4
optIfOTUk
OBJECT IDENTIFIER
.1.3.6.1.2.1.10.133.1.7
optIfOTUkConfigTableA table of OTUk configuration information.
SEQUENCE OF OptIfOTUkConfigEntry
.1.3.6.1.2.1.10.133.1.7.1
optIfOTUkConfigEntryA conceptual row that contains OTUk configuration information of an interface.
OptIfOTUkConfigEntry
.1.3.6.1.2.1.10.133.1.7.1.1
optIfOTUkDirectionalityIndicates the directionality of the entity.ro
OptIfDirectionality
.1.3.6.1.2.1.10.133.1.7.1.1.1
optIfOTUkBitRateKIndicates the bit rate of the entity.ro
OptIfBitRateK
.1.3.6.1.2.1.10.133.1.7.1.1.2
optIfOTUkTraceIdentifierTransmittedThe trace identifier transmitted. This object is applicable when optIfOTUkDirectionality has the value source(2) or bidirectional(3). It must not be instantiated in rows where optIfOTUkDirectionality has the value sink(1). If no value is ever set by a management entity for this object, system-specific default value will be used. Any implementation that instantiates this object must document the system-specific default value or how it is derived.rw
OptIfTxTI
.1.3.6.1.2.1.10.133.1.7.1.1.3
optIfOTUkDAPIExpectedThe DAPI expected by the receiver. This object is only applicable to the sink function, i.e., only when optIfOTUkDirectionality has the value sink(1) or bidirectional(3). It must not be instantiated in rows where optIfOTUkDirectionality has the value source(2). This object has no effect when optIfOTUkTIMDetMode has the value off(1).rw
OptIfExDAPI
.1.3.6.1.2.1.10.133.1.7.1.1.4
optIfOTUkSAPIExpectedThe SAPI expected by the receiver. This object is only applicable to the sink function, i.e., only when optIfOTUkDirectionality has the value sink(1) or bidirectional(3). It must not be instantiated in rows where optIfOTUkDirectionality has the value source(2). This object has no effect when optIfOTUkTIMDetMode has the value off(1).rw
OptIfExSAPI
.1.3.6.1.2.1.10.133.1.7.1.1.5
optIfOTUkTraceIdentifierAcceptedThe actual trace identifier accepted. This object is only applicable to the sink function, i.e., only when optIfOTUkDirectionality has the value sink(1) or bidirectional(3). It must not be instantiated in rows where optIfOTUkDirectionality has the value source(2). The value of this object is unspecified when optIfOTUkCurrentStatus indicates a near-end defect (i.e., ssf(3), lof(4), ais(5), lom(6)) that prevents extraction of the trace message.ro
OptIfAcTI
.1.3.6.1.2.1.10.133.1.7.1.1.6
optIfOTUkTIMDetModeIndicates the mode of the Trace Identifier Mismatch (TIM) Detection function. This object is only applicable to the sink function, i.e., only when optIfOTUkDirectionality has the value sink(1) or bidirectional(3). It must not be instantiated in rows where optIfOTUkDirectionality has the value source(2). The default value of this object is off(1).rw
OptIfTIMDetMode
.1.3.6.1.2.1.10.133.1.7.1.1.7
optIfOTUkTIMActEnabledIndicates whether the Trace Identifier Mismatch (TIM) Consequent Action function is enabled. This object is only applicable to the sink function, i.e., only when optIfOTUkDirectionality has the value sink(1) or bidirectional(3). It must not be instantiated in rows where optIfOTUkDirectionality has the value source(2). This object has no effect when optIfOTUkTIMDetMode has the value off(1). The default value of this object is false(2).rw
TruthValue (SNMPv2-TC)
.1.3.6.1.2.1.10.133.1.7.1.1.8
optIfOTUkDEGThrIndicates the threshold level for declaring a performance monitoring (PM) Second to be bad. A PM Second is declared bad if the percentage of detected errored blocks in that second is greater than or equal to optIfOTUkDEGThr. This object is only applicable to the sink function, i.e., only when optIfOTUkDirectionality has the value sink(1) or bidirectional(3). It must not be instantiated in rows where optIfOTUkDirectionality has the value source(2). The default value of this object is Severely Errored Second (SES) Estimator (See ITU-T G.7710).rw
OptIfDEGThr UNITS "percentage"
.1.3.6.1.2.1.10.133.1.7.1.1.9
optIfOTUkDEGMIndicates the threshold level for declaring a Degraded Signal defect (dDEG). A dDEG shall be declared if optIfOTUkDEGM consecutive bad PM Seconds are detected. This object is only applicable to the sink function, i.e., only when optIfOTUkDirectionality has the value sink(1) or bidirectional(3). It must not be instantiated in rows where optIfOTUkDirectionality has the value source(2). The default value of this object is 7 (See ITU-T G.7710).rw
OptIfDEGM
.1.3.6.1.2.1.10.133.1.7.1.1.10
optIfOTUkSinkAdaptActiveIndicates whether the sink adaptation function is activated or not. This object is only applicable to the sink function, i.e., only when optIfOTUkDirectionality has the value sink(1) or bidirectional(3). It must not be instantiated in rows where optIfOTUkDirectionality has the value source(2). The default value of this object is false(2).rw
TruthValue (SNMPv2-TC)
.1.3.6.1.2.1.10.133.1.7.1.1.11
optIfOTUkSourceAdaptActiveIndicates whether the source adaptation function is activated or not. This object is only applicable to the source function, i.e., only when optIfOTUkDirectionality has the value source(2) or bidirectional(3). It must not be instantiated in rows where optIfOTUkDirectionality has the value sink(1). The default value of this object is false(2).rw
TruthValue (SNMPv2-TC)
.1.3.6.1.2.1.10.133.1.7.1.1.12
optIfOTUkSinkFECEnabledIf Forward Error Correction (FEC) is supported, this object indicates whether FEC at the OTUk sink adaptation function is enabled or not. This object is only applicable to the sink function, i.e., only when optIfOTUkDirectionality has the value sink(1) or bidirectional(3). It must not be instantiated in rows where optIfOTUkDirectionality has the value source(2). The default value of this object is true(1).rw
TruthValue (SNMPv2-TC)
.1.3.6.1.2.1.10.133.1.7.1.1.13
optIfOTUkCurrentStatusIndicates the defect condition of the entity, if any. This object is only applicable to the sink function, i.e., only when optIfOTUkDirectionality has the value sink(1) or bidirectional(3). It must not be instantiated in rows where optIfOTUkDirectionality has the value source(2).ro
Bits
.1.3.6.1.2.1.10.133.1.7.1.1.14
optIfGCC0ConfigTableA table of GCC0 configuration information.
SEQUENCE OF OptIfGCC0ConfigEntry
.1.3.6.1.2.1.10.133.1.7.2
optIfGCC0ConfigEntryA conceptual row that contains GCC0 configuration information of an interface. Each instance must correspond to an instance of optIfOTUkConfigEntry. Separate source and/or sink instances may exist for a given ifIndex value, or a single bidirectional instance may exist, but a bidirectional instance may not coexist with a source or sink instance. Instances of this conceptual row persist across agent restarts.
OptIfGCC0ConfigEntry
.1.3.6.1.2.1.10.133.1.7.2.1
optIfGCC0DirectionalityIndicates the directionality of the entity. The values source(2) and bidirectional(3) are not allowed if the corresponding instance of optIfOTUkDirectionality has the value sink(1). The values sink(1) and bidirectional(3) are not allowed if the corresponding instance of optIfOTUkDirectionality has the value source(2).
OptIfDirectionality
.1.3.6.1.2.1.10.133.1.7.2.1.1
optIfGCC0ApplicationIndicates the application transported by the GCC0 entity. Example applications are ECC, User data channel. The value of this object may not be changed when optIfGCC0RowStatus has the value active(1).rw
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.2.1.10.133.1.7.2.1.2
optIfGCC0RowStatusThis columnar object is used for creating and deleting a conceptual row of the optIfGCC0 config table. It is used to model the addGCC0Access and removeGCC0Access operations of an OTUk_TTP for GCC0 access control as defined in G.874.1. Setting RowStatus to createAndGo or createAndWait implies addGCC0Access. Setting RowStatus to destroy implies removeGCC0Access.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.2.1.10.133.1.7.2.1.3
optIfODUk
OBJECT IDENTIFIER
.1.3.6.1.2.1.10.133.1.8
optIfODUkConfigTableA table of ODUk configuration information.
SEQUENCE OF OptIfODUkConfigEntry
.1.3.6.1.2.1.10.133.1.8.1
optIfODUkConfigEntryA conceptual row that contains ODUk configuration information of an interface.
OptIfODUkConfigEntry
.1.3.6.1.2.1.10.133.1.8.1.1
optIfODUkDirectionalityIndicates the directionality of the entity.ro
OptIfDirectionality
.1.3.6.1.2.1.10.133.1.8.1.1.1
optIfODUkBitRateKIndicates the bit rate of the entity.ro
OptIfBitRateK
.1.3.6.1.2.1.10.133.1.8.1.1.2
optIfODUkTcmFieldsInUseIndicates the TCM field(s) that are currently in use. The positions of the bits correspond to the TCM fields. A bit that is set to 1 means that the corresponding TCM field is used. This object will be updated when rows are created in or deleted from the optIfODUkTConfigTable, or the optIfODUkTNimConfigTable.ro
Bits
.1.3.6.1.2.1.10.133.1.8.1.1.3
optIfODUkPositionSeqCurrentSizeThis variable indicates the current size of the position sequence (i.e., number of TCM function and/or GCC12 access that have been created in the ODUk interface). When the value of this variable is greater than zero, it means that one or more TCM function and/or GCC12 access have been created in the ODUk interface. In this case, there will be as many rows in the optIfODUkPositionSeqTable as the value of optIfODUkPositionSeqCurrentSize corresponding to this ODUk interface, one row for each TCM function or GCC12 access. The position of the TCM function and/or GCC12 access within the sequence is indicated by the optIfODUkPositionSeqPosition variable in optIfODUkPositionSeqTable. The optIfODUkPositionSeqTable also provides pointers to the corresponding TCM function (optIfODUkT) and GCC12 access (optIfGCC12) entities.ro
Unsigned32
.1.3.6.1.2.1.10.133.1.8.1.1.4
optIfODUkTtpPresentThis object has the value true(1) if the ifEntry under which it is instantiated contains an ODUk Trail Termination Point, i.e., is the endpoint of an ODUk path. In that case there will be a corresponding row in the ODUk TTP config table and it will not be possible to create corresponding rows in the ODUk NIM config table. This object has the value false(2) if the ifEntry under which it is instantiated contains an intermediate ODUk Connection Termination Point. In that case there is no corresponding row in the ODUk TTP config table, but it will be possible to create corresponding rows in the ODUk NIM config table. This object also affects the allowable options in rows created in the GCC12 config table and in the ODUkT config table, as specified in the DESCRIPTION clauses of the columns in those tables.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.2.1.10.133.1.8.1.1.5
optIfODUkTtpConfigTableA table of ODUk TTP configuration information.
SEQUENCE OF OptIfODUkTtpConfigEntry
.1.3.6.1.2.1.10.133.1.8.2
optIfODUkTtpConfigEntryA conceptual row that contains ODUk TTP configuration information of an interface.
OptIfODUkTtpConfigEntry
.1.3.6.1.2.1.10.133.1.8.2.1
optIfODUkTtpTraceIdentifierTransmittedThe trace identifier transmitted. This object is applicable when optIfODUkDirectionality has the value source(2) or bidirectional(3). It must not be instantiated in rows where optIfODUkDirectionality has the value sink(1). If no value is ever set by a management entity for this object, system-specific default value will be used. Any implementation that instantiates this object must document the system-specific default value or how it is derived.rw
OptIfTxTI
.1.3.6.1.2.1.10.133.1.8.2.1.1
optIfODUkTtpDAPIExpectedThe DAPI expected by the receiver. This object is only applicable to the sink function, i.e., only when optIfODUkDirectionality has the value sink(1) or bidirectional(3). It must not be instantiated in rows where optIfODUkDirectionality has the value source(2). This object has no effect when optIfODUkTtpTIMDetMode has the value off(1).rw
OptIfExDAPI
.1.3.6.1.2.1.10.133.1.8.2.1.2
optIfODUkTtpSAPIExpectedThe SAPI expected by the receiver. This object is only applicable to the sink function, i.e., only when optIfODUkDirectionality has the value sink(1) or bidirectional(3). It must not be instantiated in rows where optIfODUkDirectionality has the value source(2). This object has no effect when optIfODUkTtpTIMDetMode has the value off(1).rw
OptIfExSAPI
.1.3.6.1.2.1.10.133.1.8.2.1.3
optIfODUkTtpTraceIdentifierAcceptedThe actual trace identifier accepted. This object is only applicable to the sink function, i.e., only when optIfODUkDirectionality has the value sink(1) or bidirectional(3). It must not be instantiated in rows where optIfODUkDirectionality has the value source(2). The value of this object is unspecified when optIfODUkTtpCurrentStatus indicates a near-end defect (i.e., oci(0), lck(1), ssf(5)) that prevents extraction of the trace message.ro
OptIfAcTI
.1.3.6.1.2.1.10.133.1.8.2.1.4
optIfODUkTtpTIMDetModeIndicates the mode of the Trace Identifier Mismatch (TIM) Detection function. This object is only applicable to the sink function, i.e., only when optIfODUkDirectionality has the value sink(1) or bidirectional(3). It must not be instantiated in rows where optIfODUkDirectionality has the value source(2). The default value of this object is off(1).rw
OptIfTIMDetMode
.1.3.6.1.2.1.10.133.1.8.2.1.5
optIfODUkTtpTIMActEnabledIndicates whether the Trace Identifier Mismatch (TIM) Consequent Action function is enabled. This object is only applicable to the sink function, i.e., only when optIfODUkDirectionality has the value sink(1) or bidirectional(3). It must not be instantiated in rows where optIfODUkDirectionality has the value source(2). This object has no effect when optIfODUkTtpTIMDetMode has the value off(1). The default value of this object is false(2).rw
TruthValue (SNMPv2-TC)
.1.3.6.1.2.1.10.133.1.8.2.1.6
optIfODUkTtpDEGThrIndicates the threshold level for declaring a performance monitoring (PM) Second to be bad. A PM Second is declared bad if the percentage of detected errored blocks in that second is greater than or equal to optIfODUkDEGThr. This object is only applicable to the sink function, i.e., only when optIfODUkDirectionality has the value sink(1) or bidirectional(3). It must not be instantiated in rows where optIfODUkDirectionality has the value source(2). The default value of this object is Severely Errored Second (SES) Estimator (See ITU-T G.7710).rw
OptIfDEGThr UNITS "percentage"
.1.3.6.1.2.1.10.133.1.8.2.1.7
optIfODUkTtpDEGMIndicates the threshold level for declaring a Degraded Signal defect (dDEG). A dDEG shall be declared if optIfODUkDEGM consecutive bad PM Seconds are detected. This object is only applicable to the sink function, i.e., only when optIfODUkDirectionality has the value sink(1) or bidirectional(3). It must not be instantiated in rows where optIfODUkDirectionality has the value source(2). The default value of this object is 7 (See ITU-T G.7710).rw
OptIfDEGM
.1.3.6.1.2.1.10.133.1.8.2.1.8
optIfODUkTtpCurrentStatusIndicates the defect condition of the entity, if any. This object is only applicable to the sink function, i.e., only when optIfODUkDirectionality has the value sink(1) or bidirectional(3). It must not be instantiated in rows where optIfODUkDirectionality has the value source(2).ro
Bits
.1.3.6.1.2.1.10.133.1.8.2.1.9
optIfODUkPositionSeqTableA table of ODUk Position Sequence information.
SEQUENCE OF OptIfODUkPositionSeqEntry
.1.3.6.1.2.1.10.133.1.8.3
optIfODUkPositionSeqEntryA conceptual row that contains ODUk position sequence information of an ODUk interface. The ODUk interface is identified by the ifIndex. Associated with each ODUk interface there may be one of more conceptual rows in the optIfODUkPositionSeqTable. Each row represents a TCM or GCC12 access function within the associated ODUk interface. Rows of the optIfODUkPositionSeqTable table are created/deleted as the result of the creation/deletion of the optIfODUkT or optIfGCC12 entities.
OptIfODUkPositionSeqEntry
.1.3.6.1.2.1.10.133.1.8.3.1
optIfODUkPositionSeqIndexThis variable identifies a row in the optIfODUkPositionSeqTable Table. Each row of the optIfODUkPositionSeqTable Table represents a TCM or GCC12 access function within the associated ODUk interface.
Unsigned32
.1.3.6.1.2.1.10.133.1.8.3.1.1
optIfODUkPositionSeqPositionThis variable indicates the position of the TCM or GCC12 access function within the sequence of TCMs & GCC12 access functions of the associated ODUk interface. The TCM or GCC12 presented by this row is referenced by the optIfODUkPositionSeqPointer variable.ro
Unsigned32
.1.3.6.1.2.1.10.133.1.8.3.1.2
optIfODUkPositionSeqPointerThis variable identifies the TCM or GCC12 access function by pointing to the corresponding optIfODUkT or optIfGCC12 entity.ro
RowPointer (SNMPv2-TC)
.1.3.6.1.2.1.10.133.1.8.3.1.3
optIfODUkNimConfigTableA table of ODUkNim configuration information.
SEQUENCE OF OptIfODUkNimConfigEntry
.1.3.6.1.2.1.10.133.1.8.4
optIfODUkNimConfigEntryA conceptual row that contains ODUkNim configuration information of an interface. Each instance must correspond to an instance of optIfODUkConfigEntry for which optIfODUkTtpPresent has the value false(2). Instances of this conceptual row persist across agent restarts, and read-create columns other than the status column may be modified while the row is active.
OptIfODUkNimConfigEntry
.1.3.6.1.2.1.10.133.1.8.4.1
optIfODUkNimDirectionalitySpecifies the monitor point for the ODUk Path non-intrusive monitoring function. The value source(2) is not allowed if the corresponding instance of optIfODUkDirectionality has the value sink(1), and the value sink(1) is not allowed if the corresponding instance of optIfODUkDirectionality has the value source(2). Either the value sink(1) or source(2) is allowed if the corresponding instance of optIfODUkDirectionality has the value bidirectional(3). The value sink(1) means monitoring at the sink direction path signal of the ODUk CTP. The value source(2) means monitoring at the source direction path signal of the ODUk CTP. Monitoring the source direction of an ODUk CTP is necessary in those cases where the ODUk CTP is at an SNCP (Subnetwork Connection Protection) end (e.g., see Figure I.1.2/G.874.1). If one would like to get the performance of the protected connection, one cannot use the NIM function at both ODUk CTP sinks (before the matrix), instead one should monitor the signal at the source ODUk CTP after the matrix.
OptIfSinkOrSource
.1.3.6.1.2.1.10.133.1.8.4.1.1
optIfODUkNimDAPIExpectedThe DAPI expected by the receiver. This object has no effect if optIfODUkNimTIMDetMode has the value off(1) or sapi(3).rw
OptIfExDAPI
.1.3.6.1.2.1.10.133.1.8.4.1.2
optIfODUkNimSAPIExpectedThe SAPI expected by the receiver. This object has no effect if optIfODUkNimTIMDetMode has the value off(1) or dapi(2).rw
OptIfExSAPI
.1.3.6.1.2.1.10.133.1.8.4.1.3
optIfODUkNimTraceIdentifierAcceptedThe actual trace identifier accepted. The value of this object is unspecified if optIfODUkNimCurrentStatus has any of the bit positions oci(0), lck(1), or ssf(5) set or if optIfODUkNimRowStatus has any value other than active(1).ro
OptIfAcTI
.1.3.6.1.2.1.10.133.1.8.4.1.4
optIfODUkNimTIMDetModeIndicates the mode of the Trace Identifier Mismatch (TIM) Detection function.rw
OptIfTIMDetMode
.1.3.6.1.2.1.10.133.1.8.4.1.5
optIfODUkNimTIMActEnabledIndicates whether the Trace Identifier Mismatch (TIM) Consequent Action function is enabled.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.2.1.10.133.1.8.4.1.6
optIfODUkNimDEGThrIndicates the threshold level for declaring a performance monitoring (PM) Second to be bad. A PM Second is declared bad if the percentage of detected errored blocks in that second is greater than or equal to optIfODUkNimDEGThr.rw
OptIfDEGThr UNITS "percentage"
.1.3.6.1.2.1.10.133.1.8.4.1.7
optIfODUkNimDEGMIndicates the threshold level for declaring a Degraded Signal defect (dDEG). A dDEG shall be declared if optIfODUkNimDEGM consecutive bad PM Seconds are detected.rw
OptIfDEGM
.1.3.6.1.2.1.10.133.1.8.4.1.8
optIfODUkNimCurrentStatusIndicates the defect condition of the entity, if any. The value of this object is unspecified if optIfODUkNimRowStatus has any value other than active(1).ro
Bits
.1.3.6.1.2.1.10.133.1.8.4.1.9
optIfODUkNimRowStatusThis columnar object is used for creating and deleting a conceptual row of the optIfODUkNim config table. It is used to model the activateNim and deactivateNim operations of an OTUk_CTP for non-intrusive monitoring control as defined in G.874.1. Setting RowStatus to createAndGo or createAndWait implies activateNim. Setting RowStatus to destroy implies deactivateNim.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.2.1.10.133.1.8.4.1.10
optIfGCC12ConfigTableA table of GCC12 configuration information. The GCC function processes the GCC overhead bytes passing through them but leave the remainder of the ODUk overhead and payload data alone.
SEQUENCE OF OptIfGCC12ConfigEntry
.1.3.6.1.2.1.10.133.1.8.5
optIfGCC12ConfigEntryA conceptual row that contains GCC12 configuration information of an interface. Each instance must correspond to an instance of optIfODUkConfigEntry. Separate instances providing GCC1-only access and GCC2-only access may exist for a given ifIndex value, or a single instance providing GCC1 + GCC2 may exist, but a GCC1 + GCC2 instance may not coexist with a GCC1-only or GCC2-only instance. Instances of this conceptual row persist across agent restarts.
OptIfGCC12ConfigEntry
.1.3.6.1.2.1.10.133.1.8.5.1
optIfGCC12CodirectionalIndicates the directionality of the GCC12 termination with respect to the associated ODUk CTP. The value true(1) means that the sink part of the GCC12 extracts COMMS data from the signal at the input to the ODUk CTP sink and the source part of the GCC12 inserts COMMS data into the signal at the output of the ODUk CTP source. The value false(2) means that the sink part of the GCC12 extracts COMMS data from the signal at the output of the ODUk CTP source and the source part of the GCC12 inserts COMMS data into the signal at the input of the ODUk CTP sink. This attribute may assume either value when the corresponding instance of optIfODUkTtpPresent has the value false(2). When the value of the corresponding instance of optIfODUkTtpPresent is true(1) then the only value allowed for this attribute is true(1).
TruthValue (SNMPv2-TC)
.1.3.6.1.2.1.10.133.1.8.5.1.1
optIfGCC12GCCAccessIndicates the GCC access represented by the entity.
Enumeration
.1.3.6.1.2.1.10.133.1.8.5.1.2
optIfGCC12GCCPassThroughControls whether the selected GCC overhead bytes are passed through or modified. The value true(1) means that the selected GCC overhead bytes are passed through unmodified from the ODUk CTP input to the ODUk CTP output. The value false(2) means that the selected GCC overhead bytes are set to zero at the ODUk CTP output after the extraction of the COMMS data. This object has no effect if the corresponding instance of optIfODUkTtpPresent has the value true(1). The value of this object may not be changed when optIfGCC12RowStatus has the value active(1).rw
TruthValue (SNMPv2-TC)
.1.3.6.1.2.1.10.133.1.8.5.1.3
optIfGCC12ApplicationIndicates the application transported by the GCC12 entity. Example applications are ECC, User data channel. The value of this object may not be changed when optIfGCC12RowStatus has the value active(1).rw
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.2.1.10.133.1.8.5.1.4
optIfGCC12RowStatusThis columnar object is used for creating and deleting a conceptual row of the optIfGCC12 config table. It is used to model the addGCC12Access and removeGCC12Access operations of an ODUk_CTP or ODUk_TTP for GCC12 access control as defined in G.874.1. Setting RowStatus to createAndGo or createAndWait implies addGCC12Access. Setting RowStatus to destroy implies removeGCC12Access. Successful addition/removal of the GCC12 access function will result in updating the optIfODUkPositionSeqCurrentSize variable and the optIfODUkPositionSeqTable table of the associated ODUk entry in the optIfODUkConfigTable.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.2.1.10.133.1.8.5.1.5
optIfODUkT
OBJECT IDENTIFIER
.1.3.6.1.2.1.10.133.1.9
optIfODUkTConfigTableA table of ODUkT configuration information.
SEQUENCE OF OptIfODUkTConfigEntry
.1.3.6.1.2.1.10.133.1.9.1
optIfODUkTConfigEntryA conceptual row that contains ODUkT configuration information of an interface. Each instance must correspond to an instance of optIfODUkConfigEntry. Rows in this table are mutually exclusive with rows in the ODUkT NIM config table -- in other words, this row object may not be instantiated for a given pair of ifIndex and TCM field values if a corresponding instance of optIfODUkTNimConfigEntry already exists. Instances of this conceptual row persist across agent restarts. Except where noted otherwise, read-create columns other than the status column may be modified while the row is active.
OptIfODUkTConfigEntry
.1.3.6.1.2.1.10.133.1.9.1.1
optIfODUkTTcmFieldIndicates the tandem connection monitoring field of the ODUk OH. Valid values are integers from 1 to 6.
Unsigned32
.1.3.6.1.2.1.10.133.1.9.1.1.1
optIfODUkTCodirectionalIndicates the directionality of the ODUkT termination point with respect to the associated ODUk CTP. The value true(1) means that the sink part of the ODUkT TP extracts TCM data from the signal at the input to the ODUk CTP sink and the source part of the ODUkT TP inserts TCM data into the signal at the output of the ODUk CTP source. The value false(2) means that the sink part of the ODUkT TP extracts TCM data from the signal at the output of the ODUk CTP source and the source part of the ODUkT TP inserts TCM data into the signal at the input of the ODUk CTP sink. This attribute may assume either value when the corresponding instance of optIfODUkTtpPresent has the value false(2). When the value of the corresponding instance of optIfODUkTtpPresent is true(1) then the only value allowed for this attribute is true(1).
TruthValue (SNMPv2-TC)
.1.3.6.1.2.1.10.133.1.9.1.1.2
optIfODUkTTraceIdentifierTransmittedThe trace identifier transmitted. This object is applicable only to the following three cases. (i) optIfODUkDirectionality has the value bidirectional(3), or (ii) optIfODUkDirectionality has the value sink(1) and optIfODUkTCodirectional has the value false(2), or (iii) optIfODUkDirectionality has the value source(3) and optIfODUkTCodirectional has the value true(1). It must not be instantiated in rows for all other cases.rw
OptIfTxTI
.1.3.6.1.2.1.10.133.1.9.1.1.3
optIfODUkTDAPIExpectedThe DAPI expected by the receiver. This object is applicable only to the following three cases. (i) optIfODUkDirectionality has the value bidirectional(3), or (ii) optIfODUkDirectionality has the value sink(1) and optIfODUkTCodirectional has the value true(1), or (iii) optIfODUkDirectionality has the value source(3) and optIfODUkTCodirectional has the value false(2). It must not be instantiated in rows for all other cases. This object has no effect when optIfODUkTTIMDetMode has the value off(1).rw
OptIfExDAPI
.1.3.6.1.2.1.10.133.1.9.1.1.4
optIfODUkTSAPIExpectedThe SAPI expected by the receiver. This object is applicable only to the following three cases. (i) optIfODUkDirectionality has the value bidirectional(3), or (ii) optIfODUkDirectionality has the value sink(1) and optIfODUkTCodirectional has the value true(1), or (iii) optIfODUkDirectionality has the value source(3) and optIfODUkTCodirectional has the value false(2). It must not be instantiated in rows for all other cases. This object has no effect when optIfODUkTTIMDetMode has the value off(1).rw
OptIfExSAPI
.1.3.6.1.2.1.10.133.1.9.1.1.5
optIfODUkTTraceIdentifierAcceptedThe actual trace identifier accepted. This object is applicable only to the following three cases. (i) optIfODUkDirectionality has the value bidirectional(3), or (ii) optIfODUkDirectionality has the value sink(1) and optIfODUkTCodirectional has the value true(1), or (iii) optIfODUkDirectionality has the value source(3) and optIfODUkTCodirectional has the value false(2). It must not be instantiated in rows for all other cases. The value of this object is unspecified when optIfODUkTCurrentStatus indicates a near-end defect (i.e., oci(0), lck(1), ssf(5)) that prevents extraction of the trace message.ro
OptIfAcTI
.1.3.6.1.2.1.10.133.1.9.1.1.6
optIfODUkTTIMDetModeIndicates the mode of the Trace Identifier Mismatch (TIM) Detection function. This object is applicable only to the following three cases. (i) optIfODUkDirectionality has the value bidirectional(3), or (ii) optIfODUkDirectionality has the value sink(1) and optIfODUkTCodirectional has the value true(1), or (iii) optIfODUkDirectionality has the value source(3) and optIfODUkTCodirectional has the value false(2). It must not be instantiated in rows for all other cases. The default value of this object is off(1).rw
OptIfTIMDetMode
.1.3.6.1.2.1.10.133.1.9.1.1.7
optIfODUkTTIMActEnabledIndicates whether the Trace Identifier Mismatch (TIM) Consequent Action function is enabled. This object is applicable only to the following three cases. (i) optIfODUkDirectionality has the value bidirectional(3), or (ii) optIfODUkDirectionality has the value sink(1) and optIfODUkTCodirectional has the value true(1), or (iii) optIfODUkDirectionality has the value source(3) and optIfODUkTCodirectional has the value false(2). It must not be instantiated in rows for all other cases. This object has no effect when optIfODUkTTIMDetMode has the value off(1). The default value of this object is false(2).rw
TruthValue (SNMPv2-TC)
.1.3.6.1.2.1.10.133.1.9.1.1.8
optIfODUkTDEGThrIndicates the threshold level for declaring a performance monitoring (PM) Second to be bad. A PM Second is declared bad if the percentage of detected errored blocks in that second is greater than or equal to optIfODUkTDEGThr. This object is applicable only to the following three cases. (i) optIfODUkDirectionality has the value bidirectional(3), or (ii) optIfODUkDirectionality has the value sink(1) and optIfODUkTCodirectional has the value true(1), or (iii) optIfODUkDirectionality has the value source(3) and optIfODUkTCodirectional has the value false(2). It must not be instantiated in rows for all other cases. The default value of this object is Severely Errored Second (SES) Estimator (See ITU-T G.7710).rw
OptIfDEGThr UNITS "percentage"
.1.3.6.1.2.1.10.133.1.9.1.1.9
optIfODUkTDEGMIndicates the threshold level for declaring a Degraded Signal defect (dDEG). A dDEG shall be declared if optIfODUkTDEGM consecutive bad PM Seconds are detected. This object is applicable only to the following three cases. (i) optIfODUkDirectionality has the value bidirectional(3), or (ii) optIfODUkDirectionality has the value sink(1) and optIfODUkTCodirectional has the value true(1), or (iii) optIfODUkDirectionality has the value source(3) and optIfODUkTCodirectional has the value false(2). It must not be instantiated in rows for all other cases. The default value of this object is 7 (See ITU-T G.7710).rw
OptIfDEGM
.1.3.6.1.2.1.10.133.1.9.1.1.10
optIfODUkTSinkModeThis variable specifies the TCM mode at the entity. The value operational(1) means that TCM Overhead (TCMOH) processes (see ITU-T G.798) shall be performed and consequent actions for AIS, Trail Signal Fail (TSF), Trail Signal Degraded (TSD) shall be initiated in case of defects. The value monitor(2) means that TCMOH processes shall be performed but consequent actions for AIS, Trail Server Failure (TSF), Trail Server Degraded (TSD) shall _not_ be initiated in case of defects. This object is applicable only when the value of optIfODUkTtpPresent is false(2) and also either one of the following three cases holds: (i) optIfODUkDirectionality has the value bidirectional(3), or (ii) optIfODUkDirectionality has the value sink(1) and optIfODUkTCodirectional has the value true(1), or (iii) optIfODUkDirectionality has the value source(3) and optIfODUkTCodirectional has the value false(2). It must not be instantiated in rows for all other cases.rw
Enumeration
.1.3.6.1.2.1.10.133.1.9.1.1.11
optIfODUkTSinkLockSignalAdminStateProvides the capability to provision the LOCK signal, which is one of the ODUk maintenance signals, at the ODUKT sink. When a Tandem Connection endpoint is set to admin state locked, it inserts the ODUk-LCK signal in the sink direction. This object is applicable only when the value of optIfODUkTtpPresent is false(2) and also either one of the following three cases holds: (i) optIfODUkDirectionality has the value bidirectional(3), or (ii) optIfODUkDirectionality has the value sink(1) and optIfODUkTCodirectional has the value true(1), or (iii) optIfODUkDirectionality has the value source(3) and optIfODUkTCodirectional has the value false(2). It must not be instantiated in rows for all other cases.rw
Enumeration
.1.3.6.1.2.1.10.133.1.9.1.1.12
optIfODUkTSourceLockSignalAdminStateProvides the capability to provision the LOCK signal, which is one of the ODUk maintenance signals, at the source. When a Tandem Connection endpoint is set to admin state locked, it inserts the ODUk-LCK signal in the source direction. This object is applicable only when either one of the following three cases holds: (i) optIfODUkDirectionality has the value bidirectional(3), or (ii) optIfODUkDirectionality has the value sink(1) and optIfODUkTCodirectional has the value false(2), or (iii) optIfODUkDirectionality has the value source(3) and optIfODUkTCodirectional has the value true(1). It must not be instantiated in rows for all other cases.rw
Enumeration
.1.3.6.1.2.1.10.133.1.9.1.1.13
optIfODUkTCurrentStatusIndicates the defect condition of the entity, if any. This object is applicable only when either one of the following three cases holds: (i) optIfODUkDirectionality has the value bidirectional(3), or (ii) optIfODUkDirectionality has the value sink(1) and optIfODUkTCodirectional has the value true(1), or (iii) optIfODUkDirectionality has the value source(3) and optIfODUkTCodirectional has the value false(2). It must not be instantiated in rows for all other cases.ro
Bits
.1.3.6.1.2.1.10.133.1.9.1.1.14
optIfODUkTRowStatusThis columnar object is used for creating and deleting a conceptual row of the optIfODUkT config table. It is used to model the addTCM and removeTCM operations of an ODUk_CTP or ODUk_TTP for Tandem connection monitoring as defined in ITU-T G.874.1. Setting RowStatus to createAndGo or createAndWait implies addTCM. Setting RowStatus to destroy implies removeTCM. Successful addition/removal of TCM will result in updating the optIfODUkTcmFieldsInUse and optIfODUkPositionSeqCurrentSize variables and the optIfODUkPositionSeqTable table of the associated ODUk entry in the optIfODUkConfigTable.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.2.1.10.133.1.9.1.1.15
optIfODUkTNimConfigTableA table of ODUkTNim configuration information.
SEQUENCE OF OptIfODUkTNimConfigEntry
.1.3.6.1.2.1.10.133.1.9.2
optIfODUkTNimConfigEntryA conceptual row that contains ODUkTNim configuration information of an interface. Each instance must correspond to an instance of optIfODUkConfigEntry. Rows in this table are mutually exclusive with rows in the ODUkT config table -- in other words, this row object may not be instantiated for a given pair of ifIndex and TCM field values if a corresponding instance of optIfODUkTConfigEntry already exists. Instances of this conceptual row persist across agent restarts, and read-create columns other than the status column may be modified while the row is active.
OptIfODUkTNimConfigEntry
.1.3.6.1.2.1.10.133.1.9.2.1
optIfODUkTNimTcmFieldIndicates the tandem connection monitoring field of the ODUk OH on which non-intrusive monitoring is performed. Valid values are integers from 1 to 6.
Unsigned32
.1.3.6.1.2.1.10.133.1.9.2.1.1
optIfODUkTNimDirectionalitySpecifies the monitor point for the ODUk TCM non-intrusive monitoring function. The value source(2) is not allowed if the corresponding instance of optIfODUkDirectionality has the value sink(1), and the value sink(1) is not allowed if the corresponding instance of optIfODUkDirectionality has the value source(2). Either the value sink(1) or source(2) is allowed if the corresponding instance of optIfODUkDirectionality has the value bidirectional(3). The value sink(1) means monitoring at the sink direction TCM signal of the ODUk CTP. The value source(2) means monitoring at the source direction path signal of the ODUk CTP.
OptIfSinkOrSource
.1.3.6.1.2.1.10.133.1.9.2.1.2
optIfODUkTNimDAPIExpectedThe DAPI expected by the receiver. This object has no effect if optIfODUkTNimTIMDetMode has the value off(1) or sapi(3).rw
OptIfExDAPI
.1.3.6.1.2.1.10.133.1.9.2.1.3
optIfODUkTNimSAPIExpectedThe SAPI expected by the receiver. This object has no effect if optIfODUkTNimTIMDetMode has the value off(1) or dapi(2).rw
OptIfExSAPI
.1.3.6.1.2.1.10.133.1.9.2.1.4
optIfODUkTNimTraceIdentifierAcceptedThe actual trace identifier accepted. The value of this object is unspecified if optIfODUkTNimCurrentStatus has any of the bit positions oci(0), lck(1), or ssf(5) set or if optIfODUkTNimRowStatus has any value other than active(1).ro
OptIfAcTI
.1.3.6.1.2.1.10.133.1.9.2.1.5
optIfODUkTNimTIMDetModeIndicates the mode of the Trace Identifier Mismatch (TIM) Detection function.rw
OptIfTIMDetMode
.1.3.6.1.2.1.10.133.1.9.2.1.6
optIfODUkTNimTIMActEnabledIndicates whether the Trace Identifier Mismatch (TIM) Consequent Action function is enabled.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.2.1.10.133.1.9.2.1.7
optIfODUkTNimDEGThrIndicates the threshold level for declaring a performance monitoring (PM) Second to be bad. A PM Second is declared bad if the percentage of detected errored blocks in that second is greater than or equal to optIfODUkTNimDEGThr.rw
OptIfDEGThr UNITS "percentage"
.1.3.6.1.2.1.10.133.1.9.2.1.8
optIfODUkTNimDEGMIndicates the threshold level for declaring a Degraded Signal defect (dDEG). A dDEG shall be declared if optIfODUkTNimDEGM consecutive bad PM Seconds are detected.rw
OptIfDEGM
.1.3.6.1.2.1.10.133.1.9.2.1.9
optIfODUkTNimCurrentStatusIndicates the defect condition of the entity, if any. The value of this object is unspecified if optIfODUkTNimRowStatus has any value other than active(1).ro
Bits
.1.3.6.1.2.1.10.133.1.9.2.1.10
optIfODUkTNimRowStatusThis columnar object is used for creating and deleting a conceptual row of the optIfODUkTNim config table. It is used to model the addTCM and removeTCM operations of an ODUk_CTP or ODUk_TTP for non-intrusive Tandem connection monitoring as defined in ITU-T G.874.1. Setting RowStatus to createAndGo or createAndWait implies addTCM. Setting RowStatus to destroy implies removeTCM. Successful addition/removal of Nim TCM will result in updating the optIfODUkPositionSeqCurrentSize variable and the optIfODUkPositionSeqTable table of the associated ODUk entry in the optIfODUkConfigTable.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.2.1.10.133.1.9.2.1.11
optIfConfs
OBJECT IDENTIFIER
.1.3.6.1.2.1.10.133.2
optIfGroups
OBJECT IDENTIFIER
.1.3.6.1.2.1.10.133.2.1
optIfOTMnGroupA collection of OTMn structure information objects.
Unknown
.1.3.6.1.2.1.10.133.2.1.1
optIfPerfMonGroupA collection of performance monitoring interval objects.
Unknown
.1.3.6.1.2.1.10.133.2.1.2
optIfOTSnCommonGroupA collection of configuration objects applicable to all OTSn interfaces.
Unknown
.1.3.6.1.2.1.10.133.2.1.3
optIfOTSnSourceGroupFullA collection of configuration objects applicable to full-functionality/IaDI OTSn interfaces that support source functions.
Unknown
.1.3.6.1.2.1.10.133.2.1.4
optIfOTSnAPRStatusGroupA collection of objects applicable to OTSn interfaces that support Automatic Power Reduction functions.
Unknown
.1.3.6.1.2.1.10.133.2.1.5
optIfOTSnAPRControlGroupA collection of objects applicable to OTSn interfaces that provide Automatic Power Reduction control functions.
Unknown
.1.3.6.1.2.1.10.133.2.1.6
optIfOTSnSinkGroupBasicA collection of configuration objects applicable to all OTSn interfaces that support sink functions.
Unknown
.1.3.6.1.2.1.10.133.2.1.7
optIfOTSnSinkGroupFullA collection of configuration objects applicable to full-functionality/IaDI OTSn interfaces that support sink functions.
Unknown
.1.3.6.1.2.1.10.133.2.1.8
optIfOTSnSinkPreOtnPMGroupA collection of pre-OTN performance monitoring objects applicable to OTSn interfaces that support sink functions.
Unknown
.1.3.6.1.2.1.10.133.2.1.9
optIfOTSnSinkPreOtnPMThresholdGroupA collection of pre-OTN performance monitoring threshold objects applicable to OTSn interfaces that support sink functions.
Unknown
.1.3.6.1.2.1.10.133.2.1.10
optIfOTSnSourcePreOtnPMGroupA collection of pre-OTN performance monitoring objects applicable to OTSn interfaces that support source functions.
Unknown
.1.3.6.1.2.1.10.133.2.1.11
optIfOTSnSourcePreOtnPMThresholdGroupA collection of pre-OTN performance monitoring threshold objects applicable to OTSn interfaces that support source functions.
Unknown
.1.3.6.1.2.1.10.133.2.1.12
optIfOMSnCommonGroupA collection of configuration objects applicable to all OMSn interfaces.
Unknown
.1.3.6.1.2.1.10.133.2.1.13
optIfOMSnSinkGroupBasicA collection of configuration objects applicable to all OMSn interfaces that support sink functions.
Unknown
.1.3.6.1.2.1.10.133.2.1.14
optIfOMSnSinkPreOtnPMGroupA collection of pre-OTN performance monitoring objects applicable to OMSn interfaces that support sink functions.
Unknown
.1.3.6.1.2.1.10.133.2.1.15
optIfOMSnSinkPreOtnPMThresholdGroupA collection of pre-OTN performance monitoring threshold objects applicable to OMSn interfaces that support sink functions.
Unknown
.1.3.6.1.2.1.10.133.2.1.16
optIfOMSnSourcePreOtnPMGroupA collection of pre-OTN performance monitoring objects applicable to OMSn interfaces that support source functions.
Unknown
.1.3.6.1.2.1.10.133.2.1.17
optIfOMSnSourcePreOtnPMThresholdGroupA collection of pre-OTN performance monitoring threshold objects applicable to OMSn interfaces that that support source functions.
Unknown
.1.3.6.1.2.1.10.133.2.1.18
optIfOChGroupCommonGroupA collection of configuration objects applicable to all OChGroup interfaces.
Unknown
.1.3.6.1.2.1.10.133.2.1.19
optIfOChGroupSinkPreOtnPMGroupA collection of pre-OTN performance monitoring objects applicable to OChGroup interfaces that support sink functions.
Unknown
.1.3.6.1.2.1.10.133.2.1.20
optIfOChGroupSinkPreOtnPMThresholdGroupA collection of pre-OTN performance monitoring threshold objects applicable to OChGroup interfaces that support sink functions.
Unknown
.1.3.6.1.2.1.10.133.2.1.21
optIfOChGroupSourcePreOtnPMGroupA collection of pre-OTN performance monitoring objects applicable to OChGroup interfaces that support source functions.
Unknown
.1.3.6.1.2.1.10.133.2.1.22
optIfOChGroupSourcePreOtnPMThresholdGroupA collection of pre-OTN performance monitoring threshold objects applicable to OChGroup interfaces that that support source functions.
Unknown
.1.3.6.1.2.1.10.133.2.1.23
optIfOChCommonGroupA collection of configuration objects applicable to all OCh interfaces.
Unknown
.1.3.6.1.2.1.10.133.2.1.24
optIfOChSinkGroupBasicA collection of configuration objects applicable to all OCh interfaces that support sink functions.
Unknown
.1.3.6.1.2.1.10.133.2.1.25
optIfOChSinkPreOtnPMGroupA collection of pre-OTN performance monitoring objects applicable to OCh interfaces that support sink functions.
Unknown
.1.3.6.1.2.1.10.133.2.1.26
optIfOChSinkPreOtnPMThresholdGroupA collection of pre-OTN performance monitoring threshold objects applicable to OCh interfaces that support sink functions.
Unknown
.1.3.6.1.2.1.10.133.2.1.27
optIfOChSourcePreOtnPMGroupA collection of pre-OTN performance monitoring objects applicable to OCh interfaces that support source functions.
Unknown
.1.3.6.1.2.1.10.133.2.1.28
optIfOChSourcePreOtnPMThresholdGroupA collection of pre-OTN performance monitoring threshold objects applicable to OCh interfaces that support source functions.
Unknown
.1.3.6.1.2.1.10.133.2.1.29
optIfOTUkCommonGroupA collection of configuration objects applicable to all OTUk interfaces.
Unknown
.1.3.6.1.2.1.10.133.2.1.30
optIfOTUkSourceGroupA collection of configuration objects applicable to OTUk interfaces that support source functions.
Unknown
.1.3.6.1.2.1.10.133.2.1.31
optIfOTUkSinkGroupA collection of configuration objects applicable to OTUk interfaces that support sink functions.
Unknown
.1.3.6.1.2.1.10.133.2.1.32
optIfGCC0GroupA collection of GCC0 configuration objects.
Unknown
.1.3.6.1.2.1.10.133.2.1.33
optIfODUkGroupA collection of configuration objects applicable to all ODUk interfaces.
Unknown
.1.3.6.1.2.1.10.133.2.1.34
optIfODUkTtpSourceGroupA collection of configuration objects applicable to all interfaces that support ODUk trail termination source functions.
Unknown
.1.3.6.1.2.1.10.133.2.1.35
optIfODUkTtpSinkGroupA collection of ODUk configuration objects applicable to all interfaces that support ODUk trail termination sink functions.
Unknown
.1.3.6.1.2.1.10.133.2.1.36
optIfODUkNimGroupA collection of ODUk Nim configuration objects.
Unknown
.1.3.6.1.2.1.10.133.2.1.37
optIfGCC12GroupA collection of GCC12 configuration objects.
Unknown
.1.3.6.1.2.1.10.133.2.1.38
optIfODUkTCommonGroupA collection of configuration objects applicable to all ODUkT instances.
Unknown
.1.3.6.1.2.1.10.133.2.1.39
optIfODUkTSourceGroupA collection of configuration objects applicable to all ODUkT instances that provide source functions.
Unknown
.1.3.6.1.2.1.10.133.2.1.40
optIfODUkTSinkGroupA collection of configuration objects applicable to all ODUkT instances that provide sink functions.
Unknown
.1.3.6.1.2.1.10.133.2.1.41
optIfODUkTSinkGroupCtpA collection of configuration objects applicable to ODUkT instances not colocated with an ODUk TTP that provide sink functions.
Unknown
.1.3.6.1.2.1.10.133.2.1.42
optIfODUkTNimGroupA collection of ODUkT Nim configuration objects.
Unknown
.1.3.6.1.2.1.10.133.2.1.43
optIfCompl
OBJECT IDENTIFIER
.1.3.6.1.2.1.10.133.2.2
OPT-IF-MIB - SNMP MIB Reference | MIBs Explorer