OASWITCH-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for OASWITCH-MIB.
33
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
33 total| Object Name |
|---|
oaccess OBJECT IDENTIFIER .1.3.6.1.4.1.6926 |
RFC1155-SMI Unknown .1.3.6.1.4.1.6926 |
oaManagement OBJECT IDENTIFIER .1.3.6.1.4.1.6926.1 |
oaSwitch OBJECT IDENTIFIER .1.3.6.1.4.1.6926.1.5 |
oaSwitchMac OBJECT IDENTIFIER .1.3.6.1.4.1.6926.1.5.1 |
oaSwitchMacInfo OBJECT IDENTIFIER .1.3.6.1.4.1.6926.1.5.1.1 |
oaSwitchMacInfoNumberCurrent number of entries in the learning table.ro INTEGER .1.3.6.1.4.1.6926.1.5.1.1.1 |
oaSwitchMacInfoMaxNumbrMaximum number of entries in the learning table.ro INTEGER .1.3.6.1.4.1.6926.1.5.1.1.2 |
oaSwitchMacInfoClearGET always returns 'none (1)'.
SET 'clear(2)' couses LT erasing. GET always returns 'none (1)'.
WARNING: erasing LT on some kind of agents may couse disconnection
for short period of time.rw Enumeration .1.3.6.1.4.1.6926.1.5.1.1.5 |
oaSwMacTableA table that contains Learning Table with fields
that does not exsist in dot1dTpFdbTable. SEQUENCE OF OaSwMacEntry .1.3.6.1.4.1.6926.1.5.1.2 |
oaSwMacEntryInformation about a specific MAC address in the
oaSwMacTable. OaSwMacEntry .1.3.6.1.4.1.6926.1.5.1.2.1 |
oaSwMacAddrMAC address for which the bridge has
forwarding and/or filtering information.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6926.1.5.1.2.1.1 |
oaSwMacVidTag of the entry: the address 'Address recognition'
is concatenation of oaSwMac and oaSwMacVid.
When ISVP is not implemented or ISVL mode is disabled,
this field in SET/NEXT operations may have any value,
GET operation should return 0.ro INTEGER .1.3.6.1.4.1.6926.1.5.1.2.1.2 |
oaSwMacVidxOutbound VLAN tag: if frame 'Address recognition'
was resolved with this entry, the forwarding
will be maked according the VLAN with this tag.
When ISVP is not implemented or ISVL mode is disabled,
this field in SET operations may have any value,
GET operation should return 0.rw INTEGER .1.3.6.1.4.1.6926.1.5.1.2.1.6 |
oaSwMacGetViewIndexSequantial index of the entry.ro INTEGER .1.3.6.1.4.1.6926.1.5.1.2.1.8 |
oaSwMacPortPort of the entry. '0' value indicates that
the port number has not been learned but
that the bridge does have some forwarding/filtering
information about this address.
Another words, the frame will be forwarding
'to the CPU only' and the bridge will sovle,
what it must be done with this frame.rw INTEGER .1.3.6.1.4.1.6926.1.5.1.2.1.9 |
oaSwMacModeStatus of the entry: Only 'dynamic (2)'
entries are aged.rw Enumeration .1.3.6.1.4.1.6926.1.5.1.2.1.20 |
oaSwMacTagged'Tagged' state of the entry.
When ISVP is not implemented or ISVL mode
is disabled, this field in SET operations
may have any value, GET operation should return 0.rw Enumeration .1.3.6.1.4.1.6926.1.5.1.2.1.21 |
oaSwMacPriorityControls the priority level of this entryrw INTEGER .1.3.6.1.4.1.6926.1.5.1.2.1.22 |
oaSwMacFlagsSpecific flags for MAC entry:
0x0001 - Router Entryrw INTEGER .1.3.6.1.4.1.6926.1.5.1.2.1.23 |
oaSwMacStatusState of the entry: Only 'valid(1)' entries
participate in the forwarding/filtering process.
The new entry is created when PDU with
oaSwMacStatus=valid(1), oaSwMac, oaSwMacVid and
optionally oaSwMacPort (default '0'),
oaSwMacVidx (default oaSwMacVid) and
oaSwMacMode comes.
If {oaSwMac,oaSwMacVid} exists, the bridge replaces it.
The old entry is deleted when PDU with
oaSwMacStatus=invalid(2), oaSwMac, oaSwMacVid comes.
The old entry is modified when PDU with
oaSwMac, oaSwMacVid and new value of fields oaSwMacPort
and/or oaSwMacVidx and/or oaSwMacMode comes.rw Enumeration .1.3.6.1.4.1.6926.1.5.1.2.1.30 |
oaSysFrmGen OBJECT IDENTIFIER .1.3.6.1.4.1.6926.1.5.3 |
oaSysFrmGenSessionThis object controls the activity of the Frame Generator
process.rw Enumeration .1.3.6.1.4.1.6926.1.5.3.1 |
oaSysFrmGenDaThe Frame Generator Destination MAC Address.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6926.1.5.3.2 |
oaSysFrmGenSaThe Frame Generator Source MAC Address.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6926.1.5.3.3 |
oaSysFrmGenPktFillThe Frame Generator Packet Fill Pattern.
The default is 0.rw INTEGER .1.3.6.1.4.1.6926.1.5.3.4 |
oaSysFrmGenPktRateThe Frame Generator Rate, meaning the number of packets
per second to be generated. Each device is able to
generate a certain number of packets/second.
Default is 1 packet/secondrw INTEGER .1.3.6.1.4.1.6926.1.5.3.5 |
oaSysFrmGenDestMapThe Frame Generator Destination Map = the set of ports
to which the generated packets are to be sent. Each octet
within the value of this object specifies a set of
eight ports, with the first octet specifying ports
1 through 8, the second octet specifying ports 9
through 16, etc. Within each octet, the most
significant bit represents the lowest numbered
port, and the least significant bit represents the
highest numbered port. Thus, each port of the
switch is represented by a single bit within the
value of this object. If that bit has a value of
<1> then that port is included in the set of
ports; the port is not included if its bit has a
value of <0>. (Note that the setting of the bit
corresponding to the port from which a frame is
received is irrelevant.) The default value of
this object is a string of ones of appropriate
length.rw OCTET STRING .1.3.6.1.4.1.6926.1.5.3.6 |
oaSysFrmGenPktNumThe Frame Generator Number of Packets to be generated.
Default is 1.rw Counter .1.3.6.1.4.1.6926.1.5.3.7 |
oaSysFrmGenPktLenThe Frame Generator Packet Length. Default is 60 bytesrw INTEGER .1.3.6.1.4.1.6926.1.5.3.8 |
oaSysFrmGenXmtPktNumNumber of Packets transmitted by the The Frame Generator.ro Counter .1.3.6.1.4.1.6926.1.5.3.9 |
oaSysFrmGenPriorityThe Frame Generator packet priority.
This value determines the priority level at which
the generated packet will be transmitted.
For tagged packets the VPT field in the vlan header
will be assigned according to this value.rw INTEGER .1.3.6.1.4.1.6926.1.5.3.10 |
oaSysFrmGenVlanIdA 12 bit VLAN Identifier to be set in the PVID field
of the packet.
0 - Used when the packet should contains no vlan Header.rw INTEGER .1.3.6.1.4.1.6926.1.5.3.11 |