OADWDM-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for OADWDM-MIB.
455
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
455 total| Object Name |
|---|
oaccess OBJECT IDENTIFIER .1.3.6.1.4.1.6926 |
RFC1155-SMI Unknown .1.3.6.1.4.1.6926 |
oaManagement OBJECT IDENTIFIER .1.3.6.1.4.1.6926.1 |
oaLambdaDriver OBJECT IDENTIFIER .1.3.6.1.4.1.6926.1.41 |
powerSupplyUpThe SNMP trap that is generated when
power supply unit changes it's state from notActive to active TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.2 |
powerSupplyDownThe SNMP trap that is generated when
power supply unit changes it's state from active to notActive TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.3 |
powerSupplyInThe SNMP trap that is generated when
power supply unit is inserted into the chassis TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.4 |
powerSupplyOutThe SNMP trap that is generated when
power supply unit is taken out of the chassis TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.5 |
fanUpThe SNMP trap that is generated when
Fan unit changes it's state from notActive or fail to active TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.10 |
fanDownThe SNMP trap that is generated when
Fan unit changes it's state from active to notActive or fail TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.11 |
switchPrimaryThe SNMP trap that is generated when
optical switch on redundant card changes it's state
from Secondary to Primary TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.12 |
switchSecondaryThe SNMP trap that is generated when
optical switch on redundant card changes it's state
from Primary to Secondary TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.13 |
configChangeInThe SNMP trap that is generated when
a card is inserted into the chassis TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.14 |
transponderAccessRxThe SNMP trap that is generated when
a transponder card changes it's Access receive indication.
Note: this trap is send only if oaLdTrapsVer is not supported TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.15 |
transponderWdmRxThe SNMP trap that is generated when
a transponder card changes it's WDM receive indication.
Note: this trap is send only if oaLdTrapsVer is not supported TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.17 |
configChangeOutThe SNMP trap that is generated when
a card is taken out of the chassis TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.19 |
transponderCardLoopBackThe SNMP trap that is generated when
a transponder card changes it's LoopBack state.
Note: this trap is send only if oaLdTrapsVer is not supported TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.20 |
redundantCardPrimaryRxThe SNMP trap that is generated when
on redundant card the Primary fiber Receive status is changed TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.21 |
redundantCardSecondaryRxThe SNMP trap that is generated when
on redundant card the Secondary fiber Receive status is changed TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.22 |
cardPortsLinkThe SNMP trap that is generated when
the link status of a port at the card is changed.
Note: this trap is send only if oaLdTrapsVer is not supported TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.23 |
transponderEntityAccessRxThe SNMP trap that is generated when
a transponder at a card changes it's Access receive indication.
Note: this trap is send only if oaLdTrapsVer is not supported TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.25 |
transponderEntityWdmRxThe SNMP trap that is generated when
a transponder at a card changes it's WDM receive indication.
Note: this trap is send only if oaLdTrapsVer is not supported TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.27 |
transponderEntityLoopBackThe SNMP trap that is generated when
a transponder entity changes it's LoopBack state.
Note: this trap is send only if oaLdTrapsVer is not supported TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.28 |
transponderCardPortsLoopBackThe SNMP trap that is generated when
a transponder port changes it's LoopBack state.
Note: this trap is send only if oaLdTrapsVer is not supported TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.29 |
transponderAccessRxOnThe SNMP trap that is generated when
a transponder card changes it's Access receive indication to ON TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.30 |
transponderAccessRxOffThe SNMP trap that is generated when
a transponder card changes it's Access receive indication to Off TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.31 |
transponderWdmRxOnThe SNMP trap that is generated when
a transponder card changes it's WDM receive indication to On TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.32 |
transponderWdmRxOffThe SNMP trap that is generated when
a transponder card changes it's WDM receive indication to Off TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.33 |
transponderCardLoopBackLoopThe SNMP trap that is generated when
a transponder card changes it's LoopBack state to loop TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.34 |
transponderCardLoopBackNormalThe SNMP trap that is generated when
a transponder card changes it's LoopBack state to normal TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.35 |
cardPortsLinkOnThe SNMP trap that is generated when
the link status of a port at the card is changed to On TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.36 |
cardPortsLinkOffThe SNMP trap that is generated when
the link status of a port at the card is changed to Off TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.37 |
transponderEntityAccessRxOnThe SNMP trap that is generated when
a transponder at a card changes it's Access receive indication to On TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.38 |
transponderEntityAccessRxOffThe SNMP trap that is generated when
a transponder at a card changes it's Access receive indication to Off TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.39 |
transponderEntityWdmRxOnThe SNMP trap that is generated when
a transponder at a card changes it's WDM receive indication to On TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.40 |
transponderEntityWdmRxOffThe SNMP trap that is generated when
a transponder at a card changes it's WDM receive indication to Off TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.41 |
transponderEntityLoopBackLoopThe SNMP trap that is generated when
a transponder entity changes it's LoopBack state to loop TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.42 |
transponderEntityLoopBackNormalThe SNMP trap that is generated when
a transponder entity changes it's LoopBack state to normal TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.43 |
transponderCardPortsLoopBackLoopThe SNMP trap that is generated when
a transponder port changes it's LoopBack state to loop TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.44 |
transponderCardPortsLoopBackNormalThe SNMP trap that is generated when
a transponder port changes it's LoopBack state to normal TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.45 |
redCardPositionPrimaryThe SNMP trap that is generated when
optical switch on redundant card changes it's state
from Secondary to Primary TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.46 |
redCardPositionSecondaryThe SNMP trap that is generated when
optical switch on redundant card changes it's state
from Primary to Secondary TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.47 |
oaLdCardTemperatureNormalThe SNMP trap that is generated when Temperature
of the card placed in the corresponding slot
returned to Normal. TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.48 |
oaLdCardTemperatureHighThe SNMP trap that is generated when Temperature
of the card placed in the corresponding slot
became too High. TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.49 |
oaLdOAmplifierInputAlarmOnThe SNMP trap that is generated when
an Optical Amplifier Input Power exceeds its threshold value. TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.50 |
oaLdOAmplifierInputAlarmOffThe SNMP trap that is generated when
an Optical Amplifier Input Power returns below its threshold value. TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.51 |
oaLdOAmplifierOutputAlarmOnThe SNMP trap that is generated when
an Optical Amplifier Output Power exceeds its threshold value. TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.52 |
oaLdOAmplifierOutputAlarmOffThe SNMP trap that is generated when
an Optical Amplifier Output Power returns below its threshold value. TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.53 |
oaLdOAmplifierModuleTempAlarmOnThe SNMP trap that is generated when
an Optical Amplifier Module Temperature exceeds its threshold value. TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.54 |
oaLdOAmplifierModuleTempAlarmOffThe SNMP trap that is generated when
an Optical Amplifier Module Temperature returns below its threshold value. TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.55 |
oaLdOAmplifierInput2AlarmOnThe SNMP trap that is generated when
an Optical Amplifier Input2 Power exceeds its threshold value. TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.56 |
oaLdOAmplifierInput2AlarmOffThe SNMP trap that is generated when
an Optical Amplifier Input2 Power returns below its threshold value. TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.57 |
oaLdOAmplifierPSAlarmOnThe SNMP trap that is generated when
an Optical Amplifier PS Voltage Current exceeds its threshold value. TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.58 |
oaLdOAmplifierPSAlarmOffThe SNMP trap that is generated when
an Optical Amplifier PS Voltage Current returns below its threshold value. TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.59 |
oaLdOAmplifierAutoShutdownAlarmOnThe SNMP trap that is generated when
an Optical Amplifier Auto Shutdown exceeds its threshold value. TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.60 |
oaLdOAmplifierAutoShutdownAlarmOffThe SNMP trap that is generated when
an Optical Amplifier Auto Shutdown returns below its threshold value. TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.61 |
oaLdOAmplifierPumpTempAlarmOnThe SNMP trap that is generated when
an Optical Amplifier Pump Temperature exceeds its threshold value. TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.62 |
oaLdOAmplifierPumpTempAlarmOffThe SNMP trap that is generated when
an Optical Amplifier Pump Temperature returns below its threshold value. TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.63 |
oaLdOAmplifierPumpDriveCurrentAlarmOnThe SNMP trap that is generated when
an Optical Amplifier Pump Drive Current exceeds its threshold value. TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.64 |
oaLdOAmplifierPumpDriveCurrentAlarmOffThe SNMP trap that is generated when
an Optical Amplifier Pump Drive Current returns below its threshold value. TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.65 |
oaLdRamanAmplifierReflectedAlarmOnThe SNMP trap that is generated when
an Optical Raman Amplifier Reflected Power exceeds its threshold value. TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.66 |
oaLdRamanAmplifierReflectedAlarmOffThe SNMP trap that is generated when
an Optical Raman Amplifier Reflected Power returns below its threshold value. TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.67 |
oaLdDevCPUForceSwitchoverCommandInvokedThe SNMP trap that is generated when
the command 'CPU Force Switchover is invoked. TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.94 |
oaLdFiberPrbsTestErrorThe SNMP trap that is generated when
error is occurred during Fiber PRBS emulation test. TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.95 |
oaLdEMPortDryContactClosedThe SNMP trap that is generated when
the Dry Contact of E&M port is closed. TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.96 |
oaLdEMPortDryContactOpenedThe SNMP trap that is generated when
the Dry Contact of E&M port is opened. TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.97 |
oaLdCardRestartedThe SNMP trap that is generated when
card placed in the corresponding slot
was restarted. TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.163 |
redundantCardPrimaryRxOnThe SNMP trap that is generated when
on redundant card the Primary fiber Receive status is changed to On TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.164 |
redundantCardPrimaryRxOffThe SNMP trap that is generated when
on redundant card the Primary fiber Receive status is changed to Off TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.165 |
redundantCardSecondaryRxOnThe SNMP trap that is generated when
on redundant card the Secondary fiber Receive status is changed to On TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.166 |
redundantCardSecondaryRxOffThe SNMP trap that is generated when
on redundant card the Secondary fiber Receive status is changed Off TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.167 |
cardPortsPrimaryClockSourceThe SNMP trap that is generated when
the module's clock source changed to the primary (user selected) port TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.168 |
cardPortsNonPrimaryClockSourceThe SNMP trap that is generated when
the modules's clock source changed to a non-primary port TRAP-TYPE .1.3.6.1.4.1.6926.1.41.0.169 |
oaLdDevIdentify OBJECT IDENTIFIER .1.3.6.1.4.1.6926.1.41.1 |
oaLdNSlotsThe number of slots in this devicero INTEGER .1.3.6.1.4.1.6926.1.41.1.1 |
oaLdCardHardVersHardware version of the agent cardro INTEGER .1.3.6.1.4.1.6926.1.41.1.2 |
oaLdSoftVersAgent software versionro INTEGER .1.3.6.1.4.1.6926.1.41.1.3 |
oaLdCreatinDateAgent software creation date and timero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6926.1.41.1.4 |
oaLdDeviceTypeDevice typero Enumeration .1.3.6.1.4.1.6926.1.41.1.5 |
oaLdCardFpgaVersFPGA version of the agent cardro INTEGER .1.3.6.1.4.1.6926.1.41.1.6 |
oaLdCardBackplaneVersChassis backplane version.
Value = -1 says, this object is not supported.ro INTEGER .1.3.6.1.4.1.6926.1.41.1.7 |
oaLdTrapsVerTraps format version.
If this object is not suppoted or its value is 1,
the traps version is the origin one,
traps 15,17,20,23,25,27,28 and 29 are sent.
If this object equals 2, then for each reason there is
a 'normal' trap and an 'alarm' trap.
If this object equals 3, then for each trap, connected to lambda interface,
the interface descriptor is added.rw INTEGER .1.3.6.1.4.1.6926.1.41.1.8 |
oaLdCpuCardSerialNumberThe CPU Card's Serial Number (10 digits).ro DisplayString .1.3.6.1.4.1.6926.1.41.1.9 |
oaLdDevGenConfig OBJECT IDENTIFIER .1.3.6.1.4.1.6926.1.41.1.10 |
oaLdDevPS OBJECT IDENTIFIER .1.3.6.1.4.1.6926.1.41.1.10.1 |
oaLdDevPSNumberThe number of Power Supplies in the corresponding Device.
Value = 0 says, that Power Supply Table is not supported.ro INTEGER .1.3.6.1.4.1.6926.1.41.1.10.1.1 |
oaLdDevPSTableThis table shows all the Power Supplies modules,
existing in the corresponding Device. SEQUENCE OF OaLdDevPSEntry .1.3.6.1.4.1.6926.1.41.1.10.1.2 |
oaLdDevPSEntryThe entries of the table. OaLdDevPSEntry .1.3.6.1.4.1.6926.1.41.1.10.1.2.1 |
oaLdDevPSIndexThe index of the table,
(MAX Value is equal to oaLdDevPSNumber).ro INTEGER .1.3.6.1.4.1.6926.1.41.1.10.1.2.1.1 |
oaLdDevPSOperStatusThe Oper status of the Power Supply.ro Enumeration .1.3.6.1.4.1.6926.1.41.1.10.1.2.1.5 |
oaLdDevPSPartNumberThe Part Number of the Power Supply(maximum 15 symbols).ro DisplayString .1.3.6.1.4.1.6926.1.41.1.10.1.2.1.6 |
oaLdDevPSSerialNumberThe Serial Number of the Power Supply(10 digits).ro DisplayString .1.3.6.1.4.1.6926.1.41.1.10.1.2.1.7 |
oaLdDevPSHwRevThe Hardware Revision of the Power Supply.ro INTEGER .1.3.6.1.4.1.6926.1.41.1.10.1.2.1.8 |
oaLdDevFAN OBJECT IDENTIFIER .1.3.6.1.4.1.6926.1.41.1.10.3 |
oaLdDevFANsNumberThe number of FANS in the corresponding Device.
Value = 0 says, that FAN Table is not supported.ro INTEGER .1.3.6.1.4.1.6926.1.41.1.10.3.1 |
oaLdDevFANTableThis table shows all the FANs
existing in the corresponding Device. SEQUENCE OF OaLdDevFANEntry .1.3.6.1.4.1.6926.1.41.1.10.3.2 |
oaLdDevFANEntryThe entries of the table. OaLdDevFANEntry .1.3.6.1.4.1.6926.1.41.1.10.3.2.1 |
oaLdDevFANIndexThe index of the table,
(MAX Value is equal to oaLdDevFANsNumber).ro INTEGER .1.3.6.1.4.1.6926.1.41.1.10.3.2.1.1 |
oaLdDevFANOperStatusThe Oper status of the FAN.ro Enumeration .1.3.6.1.4.1.6926.1.41.1.10.3.2.1.5 |
oaLdDevCPU OBJECT IDENTIFIER .1.3.6.1.4.1.6926.1.41.1.10.4 |
oaLdDevCPUNumberThe number of CPU modules in the corresponding Device.ro INTEGER .1.3.6.1.4.1.6926.1.41.1.10.4.1 |
oaLdDevCPUTableThis table shows all the CPU modules,
existing in the corresponding Device. SEQUENCE OF OaLdDevCPUEntry .1.3.6.1.4.1.6926.1.41.1.10.4.10 |
oaLdDevCPUEntryThe entries of the table. OaLdDevCPUEntry .1.3.6.1.4.1.6926.1.41.1.10.4.10.1 |
oaLdDevCPUIndexThe index of the table,
(MAX Value is equal to oaLdDevCPUNumber).ro INTEGER .1.3.6.1.4.1.6926.1.41.1.10.4.10.1.1 |
oaLdDevCPUOperStatusThe Operative status of the CPU module.
active - single CPU module or master CPU module in chassis with redundant CPU;
standby - slave CPU module in chassis with redundant CPU;
reset - slave CPU module in shutdown mode.ro Enumeration .1.3.6.1.4.1.6926.1.41.1.10.4.10.1.2 |
oaLdDevCPUTypeThe HW Type of the CPU module.
mgtd - regular agent module;
mgtp - power agent module with additional HW features.ro Enumeration .1.3.6.1.4.1.6926.1.41.1.10.4.10.1.3 |
oaLdDevCPUHardVersThe CPU Card's hardware version.ro INTEGER .1.3.6.1.4.1.6926.1.41.1.10.4.10.1.4 |
oaLdDevCPUFpgaVersThe CPU Card's FPGA version.ro INTEGER .1.3.6.1.4.1.6926.1.41.1.10.4.10.1.5 |
oaLdDevCPUSerialNumberThe CPU Card's Serial Number (10 digits).ro DisplayString .1.3.6.1.4.1.6926.1.41.1.10.4.10.1.6 |
oaLdDevCPUBuildTimeAgent software creation date and time.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6926.1.41.1.10.4.10.1.7 |
oaLdDevCPUSoftVersAgent software version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6926.1.41.1.10.4.10.1.8 |
oaLdDevCPUBoardIDID of CPU's base cardro INTEGER .1.3.6.1.4.1.6926.1.41.1.10.4.10.1.9 |
oaLdDevCPUBoardHardVersHardware version of CPU's base cardro INTEGER .1.3.6.1.4.1.6926.1.41.1.10.4.10.1.10 |
oaLdDevRedundantCPU OBJECT IDENTIFIER .1.3.6.1.4.1.6926.1.41.1.10.5 |
oaLdDevRedundantFeatureSet Redundant CPU feature on the next boot in the corresponding Device.rw Enumeration .1.3.6.1.4.1.6926.1.41.1.10.5.1 |
oaLdDevRedundantModeSet Redundant CPU mode in the corresponding Device.rw Enumeration .1.3.6.1.4.1.6926.1.41.1.10.5.2 |
oaLdDevRedundantCommandForce a command in the corresponding Device.
forceSwitchOver - Force Standby CPU module to become Active;
forceSync - Force configuration sync with Standby system.rw Enumeration .1.3.6.1.4.1.6926.1.41.1.10.5.3 |
oaLdDevRedundantPeerAdminStatusForce a command to Slave (peer) CPU module in the corresponding Device.
recover - recover peer CPU module by hardware reset;
reboot - reboot peer CPU module;
shutdown - shutdown peer CPU module and hold it in reset mode.rw Enumeration .1.3.6.1.4.1.6926.1.41.1.10.5.4 |
oaLdDevGenIdentify OBJECT IDENTIFIER .1.3.6.1.4.1.6926.1.41.1.11 |
oaLdCardBackplaneSNChassis backplane's Serial Number (10 digits).ro DisplayString .1.3.6.1.4.1.6926.1.41.1.11.1 |
oaLdSoftVersStringAgent software version in string presentationro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6926.1.41.1.11.2 |
oaLdCardBackplanePNChassis backplane's Part Number (maximum 15 digits).ro DisplayString .1.3.6.1.4.1.6926.1.41.1.11.3 |
oaLdCardIftableExtModeInterface fTable extention mode.rw Enumeration .1.3.6.1.4.1.6926.1.41.1.11.4 |
oaLdSlotsStatTable OBJECT IDENTIFIER .1.3.6.1.4.1.6926.1.41.3 |
oaLdCardsStatTableA list of all the slots status objects SEQUENCE OF OaLdCardsStatEntry .1.3.6.1.4.1.6926.1.41.3.1 |
oaLdCardsStatEntryThe slots status information. OaLdCardsStatEntry .1.3.6.1.4.1.6926.1.41.3.1.1 |
oaLdCardIndexThe slot#. An index from 1 to The number of slots.ro INTEGER .1.3.6.1.4.1.6926.1.41.3.1.1.1 |
oaLdCardTypeThe Card's typero Enumeration .1.3.6.1.4.1.6926.1.41.3.1.1.2 |
oaLdCardRevThe Card's Revisionro Enumeration .1.3.6.1.4.1.6926.1.41.3.1.1.3 |
oaLdCardLambdaChThe Card's Lambda channelro LambdaCh .1.3.6.1.4.1.6926.1.41.3.1.1.4 |
oaLdCardOptAccRxSlot optic access Rx indication.
Indicates the optic access Receive status
2 - Receive On
3 - Receive Offro Enumeration .1.3.6.1.4.1.6926.1.41.3.1.1.5 |
oaLdCardOptDwdmRxSlot optic DWDM Rx indication.
Indicates the optic DWDM Receive status
2 - Receive On
3 - Receive Offro Enumeration .1.3.6.1.4.1.6926.1.41.3.1.1.6 |
oaLdCardDwdmLaserTxSlot DWDM Laser Tx Fail indication.
Indicates the DWDM Laser Transmit status
2 - Transmit OK
3 - Transmit Failro Enumeration .1.3.6.1.4.1.6926.1.41.3.1.1.7 |
oaLdCardLaserTempSlot Laser Temperature indication.
Indicates the Laser Temperature status
2 - Temperature Normal
3 - Temperature Highro Enumeration .1.3.6.1.4.1.6926.1.41.3.1.1.8 |
oaLdCardAmbientTempSlot Ambient Temperature indication.
Indicates the Ambient Temperature status
2 - Temperature Normal
3 - Temperature Highro Enumeration .1.3.6.1.4.1.6926.1.41.3.1.1.9 |
oaLdCardRateSelectTransponder Rate Select.
Indicates the transponder rate.
oc48, stm16 and fiberChannel2125 are for card EM2009-CH
and EM2009-DH only.
sonetSdh10giga and fiberChannel10giga are for module TM2-SFPPXFP only.rw RateSelect .1.3.6.1.4.1.6926.1.41.3.1.1.10 |
oaLdCardRateModeTransponder Rate Mode.
Indicates the transponder rate mode.
2 - Automatic - Rate is set by software
3 - Manual - Rate is set by DIP switches on board
If manual, oaLdCardRateSelect can not be changed by software.ro Enumeration .1.3.6.1.4.1.6926.1.41.3.1.1.11 |
oaLdCardLaserModeTransponder Laser Mode.
Indicates the transponder laser mode.
2 - Enable - Laser is enabled
3 - Disable - Laser is disabled (can not transmit)rw Enumeration .1.3.6.1.4.1.6926.1.41.3.1.1.12 |
oaLdCardWdmRxPmTransponder WDM receiver optical power.
Indicates the optical power in dBm.
To calculate the power use the equation P(dBm)=oaLdCardWdmRxPm/2,
when oaLdCardWdmRxPm is a signed number.
(171) is returned when this feature is not supportedro INTEGER .1.3.6.1.4.1.6926.1.41.3.1.1.15 |
oaLdCardWdmTxPmTransponder WDM transmitter optical power.
Indicates the optical power in dBm.
To calculate the power use the equation P(dBm)=oaLdCardWdmTxPm/2,
when oaLdCardWdmTxPm is a signed number.
(171) is returned when this feature is not supported
Note: For TM-DXFP card the optical power are in units of percent (%)ro INTEGER .1.3.6.1.4.1.6926.1.41.3.1.1.16 |
oaLdCardLoopBackTransponder LoopBack state.
Indicates the transponder LoopBack state.
2 - normal - Transponder card is in non-loopback state
3 - loopback - Transponder card is in loopback state
4 - remoteLoopback - Transponder card is in remote loopback state
5 - localLoopback - Transponder card is in local loopback state
Note: options 4 and 5 are available for TM-DXFP card.rw Enumeration .1.3.6.1.4.1.6926.1.41.3.1.1.17 |
oaLdCardRedundantStateTransponder Redundant Mode.
Indicates the transponder redundant mode.
2 - normal - Transponder is in non-redundant mode
3 - redundant - Transponder is in redundant modero Enumeration .1.3.6.1.4.1.6926.1.41.3.1.1.18 |
oaLdCardPrimaryStateTransponder Primary/Secondary State.
Indicates the transponder Primary/Secondary status.
2 - secondary - Transponder is in secondary state and is not active
3 - primary - Transponder is in primary state and is activerw Enumeration .1.3.6.1.4.1.6926.1.41.3.1.1.19 |
oaLdCardFPGARevThe Card's FPGA Revisionro INTEGER .1.3.6.1.4.1.6926.1.41.3.1.1.20 |
oaLdCardPartNumberThe Card's Part Number (maximum 15 symbols).ro DisplayString .1.3.6.1.4.1.6926.1.41.3.1.1.21 |
oaLdCardSerialNumberThe Card's Serial Number (10 digits).ro DisplayString .1.3.6.1.4.1.6926.1.41.3.1.1.22 |
oaLdCardHwRevThe Card's Hardware Revisionro INTEGER .1.3.6.1.4.1.6926.1.41.3.1.1.23 |
oaLdCardOptAccTxSlot optic access Tx indication.
Indicates the optic access Transmit status
2 - Transmit On
3 - Transmit Offro Enumeration .1.3.6.1.4.1.6926.1.41.3.1.1.24 |
oaLdCardOptDwdmTxSlot optic DWDM Tx indication.
Indicates the optic DWDM Transmit status
2 - Transmit On
3 - Transmit Offro Enumeration .1.3.6.1.4.1.6926.1.41.3.1.1.25 |
oaLdCardTempThe Module Temperature (in units of 1/10 Degrees Celsius [0.1 C])ro INTEGER .1.3.6.1.4.1.6926.1.41.3.1.1.26 |
oaLdSlotEntitysStat OBJECT IDENTIFIER .1.3.6.1.4.1.6926.1.41.4 |
oaLdCardEntityStatTableA list of all Entities in a slot and their status objects SEQUENCE OF OaLdCardEntityStatEntry .1.3.6.1.4.1.6926.1.41.4.1 |
oaLdCardEntityStatEntryThe slots Entity status information. OaLdCardEntityStatEntry .1.3.6.1.4.1.6926.1.41.4.1.1 |
oaLdCardEntityCardIndexThe slot#. An index from 1 to The number of slots.ro INTEGER .1.3.6.1.4.1.6926.1.41.4.1.1.1 |
oaLdCardEntityEntityIndexThe entity#. An index from 1 to The number of entities.ro INTEGER .1.3.6.1.4.1.6926.1.41.4.1.1.2 |
oaLdCardEntityWaveLengthThe Card's entity laser wavelength (Lambda channel) in units of nm (Nanometer).
Returns 0 when not applicablero INTEGER .1.3.6.1.4.1.6926.1.41.4.1.1.5 |
oaLdCardEntityOptAccRxEntity optic access Rx indication.
Indicates the optic access Receive status
2 - Receive On
3 - Receive Offro Enumeration .1.3.6.1.4.1.6926.1.41.4.1.1.6 |
oaLdCardEntityOptDwdmRxEntity optic DWDM Rx indication.
Indicates the optic DWDM Receive status
2 - Receive On
3 - Receive Offro Enumeration .1.3.6.1.4.1.6926.1.41.4.1.1.7 |
oaLdCardEntityDwdmLaserTxEntity DWDM Laser Tx Fail indication.
Indicates the DWDM Laser Transmit status
2 - Transmit OK
3 - Transmit Failro Enumeration .1.3.6.1.4.1.6926.1.41.4.1.1.8 |
oaLdCardEntityLaserTempEntity Laser Temperature indication.
Indicates the Laser Temperature status
2 - Temperature Normal
3 - Temperature Highro Enumeration .1.3.6.1.4.1.6926.1.41.4.1.1.9 |
oaLdCardEntityAmbientTempEntity Ambient Temperature indication.
Indicates the Ambient Temperature status
2 - Temperature Normal
3 - Temperature Highro Enumeration .1.3.6.1.4.1.6926.1.41.4.1.1.10 |
oaLdCardEntityRateSelectTransponder Rate Select.
Indicates the transponder rate.
oc48, stm16 and fiberChannel2125 are for card EM2009-CH
and EM2009-DH onlyrw RateSelect .1.3.6.1.4.1.6926.1.41.4.1.1.11 |
oaLdCardEntityRateModeTransponder Rate Mode.
Indicates the transponder rate mode.
2 - Automatic - Rate is set by software
3 - Manual - Rate is set by DIP switches on board
If manual, oaLdCardRateSelect can not be changed by software.ro Enumeration .1.3.6.1.4.1.6926.1.41.4.1.1.12 |
oaLdCardEntityLaserModeTransponder Laser Mode.
Indicates the transponder laser mode.
2 - Enable - Laser is enabled
3 - Disable - Laser is disabled (can not transmit)rw Enumeration .1.3.6.1.4.1.6926.1.41.4.1.1.13 |
oaLdCardEntityWdmRxPmTransponder WDM receiver optical power.
Indicates the optical power in units of 1/10 dBm.
(oaLdCardEntityWdmRxPm is a signed number.)
(999) is returned when this feature is not supported
or irrelevant.
(-999) is returned when signal is too low.ro INTEGER .1.3.6.1.4.1.6926.1.41.4.1.1.16 |
oaLdCardEntityWdmTxPmTransponder WDM transmitter optical power.
Indicates the optical power in units of 1/10 dBm.
(oaLdCardEntityWdmTxPm is a signed number.)
(999) is returned when this feature is not supported
or irrelevant.
(-999) is returned when signal is too low.ro INTEGER .1.3.6.1.4.1.6926.1.41.4.1.1.17 |
oaLdCardEntityLoopBackTransponder LoopBack state.
Indicates the transponder LoopBack state.
2 - normal - Transponder entity is in non-loopback state
3 - loopback - Transponder entity is in loopback state
4 - remoteLoopback - Transponder entity is in remote loopback state
5 - localLoopback - Transponder entity is in local loopback state
Note: options 4 and 5 are available for TM2-D4G-SFP card.rw Enumeration .1.3.6.1.4.1.6926.1.41.4.1.1.18 |
oaLdCardEntityRedundantStateTransponder Redundant Mode.
Indicates the transponder redundant mode.
2 - normal - Transponder is in non-redundant mode
3 - redundant - Transponder is in redundant modero Enumeration .1.3.6.1.4.1.6926.1.41.4.1.1.19 |
oaLdCardEntityPrimaryStateTransponder Primary/Secondary State.
Indicates the transponder Primary/Secondary status.
2 - secondary - Transponder is in secondary state and is not active
3 - primary - Transponder is in primary state and is activerw Enumeration .1.3.6.1.4.1.6926.1.41.4.1.1.20 |
oaLdCardEntityClockSourceOCM Module Port Clock Source State.
Indicates the Port Clock Source.
2 - Port 1 - Module Clock Source is port 1
3 - Port 2 - Module Clock Source is port 2
4 - Port 3 - Module Clock Source is port 3
5 - Port 4 - Module Clock Source is port 4
6 - Port 5 - Module Clock Source is port 5 or Trunk port
according to module type
7 - Port 6 - Module Clock Source is port 6
8 - Port 7 - Module Clock Source is port 7
9 - Port 8 - Module Clock Source is port 8
10 - Port 9 - Module Clock Source is Trunk portrw Enumeration .1.3.6.1.4.1.6926.1.41.4.1.1.21 |
oaLdCardEntityTransparencyOCM Module Transparency State.
Indicates the Module transparency state.
2 - transparent - Module is in transparency mode
3 - no transparent - Module is in non transparency moderw Enumeration .1.3.6.1.4.1.6926.1.41.4.1.1.22 |
oaLdCardEntityStandardOCM Module Standard Mode.
Indicates the Module Standard.
2 - sonet - Module in SONET standard mode
3 - sdh - Module in SDH standard moderw Enumeration .1.3.6.1.4.1.6926.1.41.4.1.1.23 |
oaLdCardEntityAccessLinStateTransponder LIN status.
Indicates the transponder access LIN status.
2 - Enable - Access LIN is enabled
3 - Disable - Access LIN is disabledrw Enumeration .1.3.6.1.4.1.6926.1.41.4.1.1.24 |
oaLdCardEntityLineCodingIndicates the T1 cards Line Coding.
2 - B8ZS - Bipolar 8-zero substitution encoding
3 - AMI - Alternate Mark Inversion encodingrw Enumeration .1.3.6.1.4.1.6926.1.41.4.1.1.25 |
oaLdCardEntityUartBaudRateIndicates the T1 cards UART Baud Rate configuration.rw Enumeration .1.3.6.1.4.1.6926.1.41.4.1.1.26 |
oaLdCardEntityUartParityIndicates the T1 cards UART Parity configuration.rw Enumeration .1.3.6.1.4.1.6926.1.41.4.1.1.27 |
oaLdCardEntityUartStopBitIndicates the T1 cards UART Stop Bit configuration.
1 - Stop Bit 1 x data bit,
2 - Stop Bit 1.5 x data bit.rw Enumeration .1.3.6.1.4.1.6926.1.41.4.1.1.28 |
oaLdCardEntityPmModeModule Performance Monitoring Mode.
Indicates the Module Performance Monitoring mode.
2 - Enable - PM is enabled
3 - Disable - PM is disabledrw Enumeration .1.3.6.1.4.1.6926.1.41.4.1.1.29 |
oaLdCardEntityWdmFecModeThe Forward Error Correction (FEC) mode which is used
in the module.
2 - g709 - Standard G.709 FEC mode.
3 - eFec - Enhanced FEC proprietary mode.
4 - byPass - Bypass FEC mode (no FEC).
5 - uFec - Ultra FEC mode.rw Enumeration .1.3.6.1.4.1.6926.1.41.4.1.1.30 |
oaLdCardEntityMinDispDistMinimum Dispersion distance of integrated TODC.
(0) is returned when this feature is not supported
Units: ps/nmro INTEGER UNITS "ps/nm" .1.3.6.1.4.1.6926.1.41.4.1.1.31 |
oaLdCardEntityMaxDispDistMaximum Dispersion distance of integrated TODC.
(0) is returned when this feature is not supported
Units: ps/nmro INTEGER UNITS "ps/nm" .1.3.6.1.4.1.6926.1.41.4.1.1.32 |
oaLdCardEntityDispDistDispersion distance of integrated TODC.
Units: ps/nmrw INTEGER UNITS "ps/nm" .1.3.6.1.4.1.6926.1.41.4.1.1.33 |
oaLdCardEntityCCModeEM1600-4CC10G Module cross connection mode.
dual1234 - Dual transponder mode, when port 1 <-> 2, port 3 <-> 4.
dual1324 - Dual transponder mode, when port 1 <-> 3, port 2 <-> 4.
dual1423 - Dual transponder mode, when port 1 <-> 4, port 2 <-> 3.
protectRxMon - Protection with RX Monitor mode.
protectTxMon - Protection with TX Monitor mode.
multicast2 - Multicast mode, when port 2 is back.
multicast3 - Multicast mode, when port 3 is back.
multicast4 - Multicast mode, when port 4 is back.
loopbackPerPort - Remote Loop Back for all ports moderw Enumeration .1.3.6.1.4.1.6926.1.41.4.1.1.34 |
oaLdCardEntityOptAccTxEntity optic access Tx indication.
Indicates the optic access Transmit status
2 - Transmit On
3 - Transmit Offro Enumeration .1.3.6.1.4.1.6926.1.41.4.1.1.35 |
oaLdCardEntityOptDwdmTxEntity optic DWDM Tx indication.
Indicates the optic DWDM Transmit status
2 - Transmit On
3 - Transmit Offro Enumeration .1.3.6.1.4.1.6926.1.41.4.1.1.36 |
oaLdCardEntityEMCfgTypeSpecifies the E&M Lead Signaling type.rw Enumeration .1.3.6.1.4.1.6926.1.41.4.1.1.37 |
oaLdCardEntityEMCfgSideSpecifies the side of the unit:
trunkCircuitSide - Trunk Circuit Side
signalingUnitSide - Signaling Unit Side
Usualy the PBX is the trunk circuit side and the
telco, CO is the signaling unit side.rw Enumeration .1.3.6.1.4.1.6926.1.41.4.1.1.38 |
oaLdCardEntityPreemptionModeEM1600-4CC10G Module preemption mode for TX or RX Protection cross connect.
In two following preemption modes one of access ports has priority
to be active in case of two links are ON.
port2 - Port 2 has priority to be active if two links are ON for bith ports 2 and 3.
port3 - Port 3 has priority to be active if two links are ON for bith ports 2 and 3.
noPreemption - first linked port is active.rw Enumeration .1.3.6.1.4.1.6926.1.41.4.1.1.39 |
oaLdCardEntityActivePortEM1600-4CC10G Module actual active port for TX or RX Protection cross connect.ro Enumeration .1.3.6.1.4.1.6926.1.41.4.1.1.40 |
oaLdCardEntityOperationModeother - Modue does not support this feature.
normal- Normal operational mode.
yCableRedundant - For TM2-XFP module redundancy mode.
repeater - For TM2-XFPF module - connects between the two WDM ports
for 10GE LAN repeater functionality.
repeaterWan - For TM2-XFPF module - connects between the two WDM ports
for 10GE WAN repeater functionality.
Next modes for module TM2-SFPXC:
dualTransponder - as regular Dual Transponder module.
broadcastUni - connects between WDM to three Access ports unidirectional.
crossTransponder - connects as dual transponder between opposite WDM and Access ports.
mux2WDM1Access - connects between two WDM ports for mux to one Access port.rw Enumeration .1.3.6.1.4.1.6926.1.41.4.1.1.41 |
oaLdCardEntityRedundantTypeRedundant operation mode, (applicable only for modules that support this features)
other - Module does not support this feature,
normal - No redundant mode,
dualSlotRedundancy - Redundancy mode between the same entity of two sequential slots,
singleSlotRedundancy - Redundancy mode between two entities at the same modulerw Enumeration .1.3.6.1.4.1.6926.1.41.4.1.1.42 |
oaLdCardEntityOtu2MappingModeFor entities that enables mapping of clients into the OTN payload. The mode will indicate about
the method of OTU-2 Line mapping. Based on that mode the user is able to build his services.
none - Module does not support this feature.
basicMode - The default mode. In this mode the output payload format is independently configured
based on user's request. All known clients are available.
extendedMode1 - In this mode the output payload format is configured to Vcat 4xOTU-1 for GFP-T model.
The user is able to add fibre-channel and Eth-1G clients.
extendedMode2 - In this mode the output payload format is configured to Vcat 4xOTU-1 for GFP-F model.
The user is able to add SDI (Video) and Ethernet clients.rw Enumeration .1.3.6.1.4.1.6926.1.41.4.1.1.43 |
oaLdCardEntityTopologyModerw Enumeration .1.3.6.1.4.1.6926.1.41.4.1.1.44 |
oaLdCardEntityDispDistAdminAdministrative calibration factor for
Dispersion distance of integrated TODC.
Units: ps/nmrw INTEGER UNITS "ps/nm" .1.3.6.1.4.1.6926.1.41.4.1.1.45 |
oaLdRedundantOptic OBJECT IDENTIFIER .1.3.6.1.4.1.6926.1.41.6 |
oaLdRedundantOpticTableTable of installed Lambda Driver Redundant Optical Cards SEQUENCE OF OaLdRedundantOpticEntry .1.3.6.1.4.1.6926.1.41.6.1 |
oaLdRedundantOpticEntryInstalled Lambda Driver Redundant Optical Cards OaLdRedundantOpticEntry .1.3.6.1.4.1.6926.1.41.6.1.1 |
oaLdRedOptSlotNumberThe slot#. An index from 1 to The number of slotsro INTEGER .1.3.6.1.4.1.6926.1.41.6.1.1.1 |
oaLdRedOptSwitchPositionSwitch Position:
2 - Receive from Primary fiber.
3 - Receive from Secondary fiber.
Note:
a command to set the switch to a non received fiber will be
ignored.rw Enumeration .1.3.6.1.4.1.6926.1.41.6.1.1.2 |
oaLdRedOptLastCommandIndicates who issue the last command
automatic - by hardware
manual - by softwarero Enumeration .1.3.6.1.4.1.6926.1.41.6.1.1.3 |
oaLdRedOptPrimaryRxIndicates the Primary fiber Receive status
2 - Receive On
3 - Receive Offro Enumeration .1.3.6.1.4.1.6926.1.41.6.1.1.4 |
oaLdRedOptSecondaryRxIndicates the Secondary fiber Receive status
2 - Receive On
3 - Receive Offro Enumeration .1.3.6.1.4.1.6926.1.41.6.1.1.5 |
oaLdCardPortsStat OBJECT IDENTIFIER .1.3.6.1.4.1.6926.1.41.8 |
oaLdCardPortsStatTableTable of installed Lambda Driver Cards with more then one port SEQUENCE OF OaLdCardPortsStatEntry .1.3.6.1.4.1.6926.1.41.8.1 |
oaLdCardPortsStatEntryInstalled Lambda Driver Cards with more then one port OaLdCardPortsStatEntry .1.3.6.1.4.1.6926.1.41.8.1.1 |
oaLdCardPortsSlotNumberThe slot#. An index from 1 to The number of slotsro INTEGER .1.3.6.1.4.1.6926.1.41.8.1.1.1 |
oaLdCardPortsPortNumberThe port#. An index from 1 to The number of portsro INTEGER .1.3.6.1.4.1.6926.1.41.8.1.1.2 |
oaLdCardPortsLinkIndicates the link status of the port
2 - link on
3 - link offro Enumeration .1.3.6.1.4.1.6926.1.41.8.1.1.3 |
oaLdCardPortsActivityIndicates the activety status of the port
2 - activety on
3 - activety offro Enumeration .1.3.6.1.4.1.6926.1.41.8.1.1.4 |
oaLdCardPortsWaveLengthThe port laser wavelength (Lambda channel) in units of nm (Nanometer).
Returns 0 when not applicablero INTEGER .1.3.6.1.4.1.6926.1.41.8.1.1.6 |
oaLdCardPortsLoopBackTransponder LoopBack state.
Indicates the transponder LoopBack state.
2 - normal - Transponder card is in non-loopback state
3 - remoteLoopback - Transponder card is in remote loopback state
4 - localLoopback - Transponder card is in local loopback state
5 - lineLoopbackEnable - OCM module is in (LLEB)
line loopback enable state
6 - diagnosticLoopbackEnable - OCM module is in (DLEB)
diagnostic loopback enablestaterw Enumeration .1.3.6.1.4.1.6926.1.41.8.1.1.8 |
oaLdCardPortsCountersWhen read :
1 - Counter feature is NOT supported
2 - Counter feature is supported
4 - Extended ethernet counters are supported
When write:
3 - Clear all port contersrw Enumeration .1.3.6.1.4.1.6926.1.41.8.1.1.12 |
oaLdCardPortsCounter1LowThe number of bytes received at the port.
This object returns the least significant 32 bits of a 64 bits counter.
To calculate the actual counter reading, use the following formula:
oaLdCardPortsCounter1High * (2^32) + oaLdCardPortsCounter1Low.ro Counter .1.3.6.1.4.1.6926.1.41.8.1.1.14 |
oaLdCardPortsCounter1HighThe number of bytes received at the port.
This object returns the most significant 32 bits of a 64 bits counter.
To calculate the actual counter reading, use the following formula:
oaLdCardPortsCounter1High * (2^32) + oaLdCardPortsCounter1Low.ro Counter .1.3.6.1.4.1.6926.1.41.8.1.1.15 |
oaLdCardPortsCounter2LowThe number of error bytes received at the port.
This object returns the least significant 32 bits of a 64 bits counter.
To calculate the actual counter reading, use the following formula:
oaLdCardPortsCounter2High * (2^32) + oaLdCardPortsCounter2Low.ro Counter .1.3.6.1.4.1.6926.1.41.8.1.1.17 |
oaLdCardPortsCounter2HighThe number of error bytes received at the port.
This object returns the most significant 32 bits of a 64 bits counter.
To calculate the actual counter reading, use the following formula:
oaLdCardPortsCounter2High * (2^32) + oaLdCardPortsCounter2Low.ro Counter .1.3.6.1.4.1.6926.1.41.8.1.1.18 |
oaLdCardPortsConnectorTypePort Connector Types:
other - 1 - Unknown type of connector
static- 2 - Not Changeable (fix) type of connector
gbic - 3 - GBIC type of connector
sfp - 4 - SFP type of connector
xfp - 5 - XFP type of connector
xfpe - 6 - XFPE type of connectorro Enumeration .1.3.6.1.4.1.6926.1.41.8.1.1.20 |
oaLdCardPortsConnectorSubTypePort Connector Physical Sub Type:
other -1 - Unknown or N/A Connector's connectivity Type
rj45 -2 - Copper RJ45
sc -3 - Regular Fibre Optic [FO]
lc -4 - LC
mtrj -5 - MT-RJ
vf -6 - VF
mu -7 - MU
miniCoax-8 - mini Coaxical Connector
mdiCx -9 - SFF-8470 MDI Connector
bnc -10- BNC (Bayonet Neil-Concelman Connector)ro Enumeration .1.3.6.1.4.1.6926.1.41.8.1.1.21 |
oaLdCardPortsRaterw RateMode .1.3.6.1.4.1.6926.1.41.8.1.1.22 |
oaLdCardPortsLineLengthT1 ports line length:
other - 1 - Unknown line length
from0to133 - 2 - line length 0 - 133 ft. (0.6 dB)
from133to266 - 3 - line length 133 - 266 ft. (1.2 dB)
from266to399 - 4 - line length 266 - 399 ft. (1.8 dB)
from399to533 - 5 - line length 399 - 533 ft. (2.4 dB)
from533to655 - 6 - line length 533 - 655 ft. (3.0 dB)rw Enumeration .1.3.6.1.4.1.6926.1.41.8.1.1.23 |
oaLdCardPortsAccessLinStatePort LIN status.
Indicates the Port access LIN status.
2 - Enable - Access LIN is enabled
3 - Disable - Access LIN is disabledrw Enumeration .1.3.6.1.4.1.6926.1.41.8.1.1.24 |
oaLdCardPortsFlowControlModeModule Flow Control Mode.
Indicates the flow control mode for 10GbE access.
2 - Enable - Flow Control is enabled
3 - Disable - Flow Control is disabledrw Enumeration .1.3.6.1.4.1.6926.1.41.8.1.1.25 |
oaLdCardPortsDryContactStatPort Dry Contact State.
Indicates the Port Dry Contact State.
2 - open - Dry Contact is open
3 - close - Dry Contact is closero Enumeration .1.3.6.1.4.1.6926.1.41.8.1.1.26 |
oaLdCardPortsPowerTuningPort Power Tuning in dB of the E&M signal.
(20) is returned if this value is undefined.rw INTEGER (-10..10) .1.3.6.1.4.1.6926.1.41.8.1.1.27 |
oaLdCardPortsMediaTypeType of Media.ro Enumeration .1.3.6.1.4.1.6926.1.41.8.1.1.28 |
oaLdCardPortsEMCfgOperationSpecify the operation of the E&M signal.
twoWires - 2-wire operation.
fourWires - 4-wire operation.rw Enumeration .1.3.6.1.4.1.6926.1.41.8.1.1.29 |
oaLdCardPortsEyemaxStateEyeMax state mode, (applicable only for ports that support this (EYEMAX) features)
other - Port does not support this feature,
disable - no Eyemax mode,
scanning - start scan process,
tracking - start tracking process,
calibrating - set the 'oaLdCardPortsEyemaxAdminFactor' value into DAC,
stopTracking - stop track process.rw Enumeration .1.3.6.1.4.1.6926.1.41.8.1.1.30 |
oaLdCardPortsEyemaxOperFactorEyeMax Operational Calibrate factor, This value represents current DAC output.
When this feature is not supported (0) is returned.
Units: percent.ro INTEGER .1.3.6.1.4.1.6926.1.41.8.1.1.31 |
oaLdCardPortsEyemaxAdminFactorEyeMax Administrative Calibration factor, This value is represents
the value to be set into DAC.
After scan operation it holds the optimal value that should be set into DAC.
Users are able to set any value (0-100%) in order to change DAC outputs.
(0) is returned when this feature is not supported
Units: percent.rw INTEGER .1.3.6.1.4.1.6926.1.41.8.1.1.32 |
oaLdCardPortsFefModePort Far End Failure (FEF) Detection mode.
2 - Enable - FEF is enabled
3 - Disable - FEF is disabledrw Enumeration .1.3.6.1.4.1.6926.1.41.8.1.1.33 |
oaLdCardPortsOdu1IndexFor clients that mapped into the OTN payload.
Indicates the index of the OPU-1 payload area.
0 - not supported, or client is not configured.
1 - Client mapped into OPU-1 #1 payload area.
2 - Client mapped into OPU-1 #2 payload area.
3 - Client mapped into OPU-1 #3 payload area.
4 - Client mapped into OPU-1 #4 payload area.rw INTEGER .1.3.6.1.4.1.6926.1.41.8.1.1.34 |
oaLdCardPortsOdu1TsIndexFor clients that mapped into the OTN payload.
Indicates the tributary slot index among the 16 tributary slots,
of the OPU-1 payload area.
0 - not supported, or client is not configured.
[1-16] - Tributary slot index.rw INTEGER .1.3.6.1.4.1.6926.1.41.8.1.1.35 |
oaLdCardPortsPmModePort Performance Monitoring Mode.
Indicates the Port Performance Monitoring mode.
2 - Enable - PM is enabled for this port
3 - Disable - PM is disabled for tthis portrw Enumeration .1.3.6.1.4.1.6926.1.41.8.1.1.36 |
oaLdCardPortsFecModeThe Forward Error Correction (FEC) mode which is used
in the selected port.
2 - g709 - Standard G.709 FEC mode.
3 - eFec - Enhanced FEC proprietary mode.
4 - byPass - Bypass FEC mode (no FEC).
5 - g9751i4 - G.975.1 Annex I.4 enhanced FEC.
6 - g9751i7 - G.975.1 Annex I.7 enhanced FEC.rw Enumeration .1.3.6.1.4.1.6926.1.41.8.1.1.37 |
oaLdCardPortsLockPort PLL lock mode.
2 - locked - PLL was locked,
3 - notlocked - PLL was not lockedro Enumeration .1.3.6.1.4.1.6926.1.41.8.1.1.38 |
oaLdCardPortsLaserModePort Laser Mode.
Indicates the port laser mode.
2 - Enable - Laser is enabled
3 - Disable - Laser is disabled (can not transmit)rw Enumeration .1.3.6.1.4.1.6926.1.41.8.1.1.39 |
oaLdCardPortsOdu1TsSizeFor clients that mapped into the OTN payload.
Indicates the number of tributary slots that are occupied by the client's rate.
0 - not supported, or client is not configured.ro INTEGER .1.3.6.1.4.1.6926.1.41.8.1.1.40 |
oaLdCardPortsSpeedPorts speed mode.rw Enumeration .1.3.6.1.4.1.6926.1.41.8.1.1.41 |
oaLdCardPortsPriorityClockSourceDefines the port's priority in relation to the clock source.
1 defines the highest priority index and the last port index
defines the least prioritized port.
The highest priority port if available is used as the clock source,
when it is not available the 2-nd highest available port would be used
as the clock source.rw INTEGER .1.3.6.1.4.1.6926.1.41.8.1.1.42 |
oaLdCardPortsActionModerw Enumeration .1.3.6.1.4.1.6926.1.41.8.1.1.43 |
oaLdCardPortsOutputPortIdrw INTEGER .1.3.6.1.4.1.6926.1.41.8.1.1.44 |
oaLdCardPortsGroupIdrw INTEGER .1.3.6.1.4.1.6926.1.41.8.1.1.45 |
oaLdCardPortsChannelIdrw INTEGER .1.3.6.1.4.1.6926.1.41.8.1.1.46 |
oaLdCardPortsAutoShutdownModePort Auto Shutdown Mode.
Indicates the port Auto Shutdown (eye safe) mode.
2 - Enable - Auto Shutdown mode is enabled
3 - Disable - Auto Shutdown mode is disabledrw Enumeration .1.3.6.1.4.1.6926.1.41.8.1.1.47 |
oaLdCardPortsEymxScnAmpFctrInitialization value for Amlification Factor used
in the Eyemax scanning operation in 0.1 units.rw INTEGER .1.3.6.1.4.1.6926.1.41.8.1.1.48 |
oaLdCardPortsEymxScnAmpFctrMinMinimum value that can be set for
Initialization of the Amlification Factor used
in the Eyemax scanning operation in 0.1 units.ro INTEGER .1.3.6.1.4.1.6926.1.41.8.1.1.49 |
oaLdCardPortsEymxScnAmpFctrMaxMaximum value that can be set for
Initialization of the Amlification Factor used
in the Eyemax scanning operation in 0.1 units.ro INTEGER .1.3.6.1.4.1.6926.1.41.8.1.1.50 |
oaLdCardPortsEymxScnDspCompsInitialization value for Dispersion Compensation
used in the Eyemax scanning operation.rw INTEGER .1.3.6.1.4.1.6926.1.41.8.1.1.51 |
oaLdCardPortsEymxScnTresholdInitialization value for Rx threshold
used in the Eyemax scanning operation.rw INTEGER .1.3.6.1.4.1.6926.1.41.8.1.1.52 |
oaLdCardPortsEymxScnOperCompltIndication how much of the scanning operation
have been already completed (in percents 0 - 100).ro INTEGER .1.3.6.1.4.1.6926.1.41.8.1.1.53 |
oaLdCardPortsEymxScnResultIndication if the scanning operation ended
properly or finished with problems.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6926.1.41.8.1.1.54 |
oaLdAdcCardInfo OBJECT IDENTIFIER .1.3.6.1.4.1.6926.1.41.9 |
oaLdAdcCardInfoTableTable of installed Lambda Driver ADC / ADCD and MUX / DMUX Cards SEQUENCE OF OaLdAdcCardInfoEntry .1.3.6.1.4.1.6926.1.41.9.2 |
oaLdAdcCardInfoEntryInstalled Lambda Driver ADC / ADCD and MUX / DMUX Cards OaLdAdcCardInfoEntry .1.3.6.1.4.1.6926.1.41.9.2.1 |
oaLdAdcCardSlotNumberThe slot#. An index from 1 to The number of slotsro INTEGER .1.3.6.1.4.1.6926.1.41.9.2.1.1 |
oaLdAdcCardNumberOfPortsNumber of ports at ADC / ADCD and MUX / DMUX card.
For MUX / DMUX card the object returns the number of
channels at card.
Value = 0 says, that ADC / ADCD and MUX / DMUX cards
Table is not supported.ro INTEGER .1.3.6.1.4.1.6926.1.41.9.2.1.2 |
oaLdAdcCardWdmWaveLengthWDM Wave Length at ADC / ADCD and MUX / DMUX card. (CWDM or DWDM)ro Enumeration .1.3.6.1.4.1.6926.1.41.9.2.1.3 |
oaLdAdcCardCardTypeWDM Card Type.ro Enumeration .1.3.6.1.4.1.6926.1.41.9.2.1.4 |
oaLdAdcCardSpacingMUX / DMUX card - steps in channel spacing (in GHz)
according to ITU-T.ro Enumeration .1.3.6.1.4.1.6926.1.41.9.2.1.5 |
oaLdAdcCardSubBandMUX / DMUX card sub-band.
Note: according to oaLdAdcCardSpacing and oaLdAdcCardSubBand
it is able to know each channel wavelength.ro Enumeration .1.3.6.1.4.1.6926.1.41.9.2.1.6 |
oaLdAdcCardChannelsPerPortNumber of channels per port at OADM-XX / BS-XX card.
For ADC / ADCD / MUX / DMUX card the object returns 1.ro INTEGER .1.3.6.1.4.1.6926.1.41.9.2.1.7 |
oaLdAdcCardPortsInfoTableTable of installed Lambda Driver ADC and ADCD Cards SEQUENCE OF OaLdAdcCardPortsInfoEntry .1.3.6.1.4.1.6926.1.41.9.4 |
oaLdAdcCardPortsInfoEntryInstalled Lambda Driver ADC and ADCD Cards OaLdAdcCardPortsInfoEntry .1.3.6.1.4.1.6926.1.41.9.4.1 |
oaLdAdcCardPortsSlotNumberThe slot#. An index from 1 to The number of slotsro INTEGER .1.3.6.1.4.1.6926.1.41.9.4.1.1 |
oaLdAdcCardPortsPortNumberThe port#. An index from 1 to The number of portsro INTEGER .1.3.6.1.4.1.6926.1.41.9.4.1.2 |
oaLdAdcCardPortsLambdaChThe Card port's Lambda channelro LambdaCh .1.3.6.1.4.1.6926.1.41.9.4.1.3 |
oaLdCardChannelInfo OBJECT IDENTIFIER .1.3.6.1.4.1.6926.1.41.11 |
oaLdCardChannelCfgTableTable of Lambda Driver Card Channels configuration. SEQUENCE OF OaLdCardChannelCfgEntry .1.3.6.1.4.1.6926.1.41.11.2 |
oaLdCardChannelCfgEntryLambda Driver Card Channels configuration Entry. OaLdCardChannelCfgEntry .1.3.6.1.4.1.6926.1.41.11.2.1 |
oaLdCardChSlotIdThe slot#. An index from 1 to The number of slots.ro INTEGER .1.3.6.1.4.1.6926.1.41.11.2.1.1 |
oaLdCardChGroupId.ro INTEGER .1.3.6.1.4.1.6926.1.41.11.2.1.2 |
oaLdCardChChannelId.ro INTEGER .1.3.6.1.4.1.6926.1.41.11.2.1.3 |
oaLdCardChOdu1IndexFor clients that mapped into the OTN payload.
Indicates the index of the OPU-1 payload area.
0 - not supported, or client is not configured.
1 - Client mapped into OPU-1 #1 payload area.
2 - Client mapped into OPU-1 #2 payload area.
3 - Client mapped into OPU-1 #3 payload area.
4 - Client mapped into OPU-1 #4 payload area.rw INTEGER .1.3.6.1.4.1.6926.1.41.11.2.1.4 |
oaLdCardChOdu1TsIndexFor clients that mapped into the OTN payload.
Indicates the tributary slot index among the 16 tributary slots,
of the OPU-1 payload area.
0 - not supported, or client is not configured.
[1-16] - Tributary slot index.rw INTEGER .1.3.6.1.4.1.6926.1.41.11.2.1.5 |
oaLdCardChOdu1TsSizeFor clients that mapped into the OTN payload.
Indicates the number of tributary slots that are occupied by the client's rate.
0 - not supported, or client is not configured.rw INTEGER .1.3.6.1.4.1.6926.1.41.11.2.1.6 |
oaLdCardChRaterw RateMode .1.3.6.1.4.1.6926.1.41.11.2.1.7 |
oaLdOAmplifierInfo OBJECT IDENTIFIER .1.3.6.1.4.1.6926.1.41.12 |
oaLdOAmplifierCardInfoTableTable of installed Lambda Driver Optical Amplifier Cards SEQUENCE OF OaLdOAmplifierCardInfoEntry .1.3.6.1.4.1.6926.1.41.12.2 |
oaLdOAmplifierCardInfoEntryInstalled Lambda Driver Optical Amplifier Cards OaLdOAmplifierCardInfoEntry .1.3.6.1.4.1.6926.1.41.12.2.1 |
oaLdOAmplifierCardSlotNumberThe slot#. An index from 1 to The number of slotsro INTEGER .1.3.6.1.4.1.6926.1.41.12.2.1.1 |
oaLdOAmplifierCardConfigurationThe Optical Amplifier Configurationro Enumeration .1.3.6.1.4.1.6926.1.41.12.2.1.2 |
oaLdOAmplifierCardModuleTypeThe Optical Amplifier Module Typero Enumeration .1.3.6.1.4.1.6926.1.41.12.2.1.3 |
oaLdOAmplifierCardHardwareVersionThe Optical Amplifier Module Hardware Versionro DisplayString .1.3.6.1.4.1.6926.1.41.12.2.1.4 |
oaLdOAmplifierCardSoftwareVersionThe Optical Amplifier Module Software Versionro DisplayString .1.3.6.1.4.1.6926.1.41.12.2.1.5 |
oaLdOAmplifierCardSerialNumberThe Optical Amplifier Module Serial Numberro DisplayString .1.3.6.1.4.1.6926.1.41.12.2.1.6 |
oaLdOAmplifierCardTemperatureThe Optical Amplifier Module Temperature
(in units of 1/10 Degrees Celsius [0.1 C])ro INTEGER .1.3.6.1.4.1.6926.1.41.12.2.1.7 |
oaLdOAmplifierCardPSVoltageThe Optical Amplifier Power Supply Voltage
(in units of 1/100 Volts [0.01 V])ro INTEGER .1.3.6.1.4.1.6926.1.41.12.2.1.8 |
oaLdOAmplifierCardPump1CurrentThe Optical Amplifier Pump 1 Current
(in units of 1/10 milliamperes [0.1 mA])ro INTEGER .1.3.6.1.4.1.6926.1.41.12.2.1.9 |
oaLdOAmplifierCardPump1MaxCurrentThe Optical Amplifier Pump 1 Maximum Current
(in units of 1/10 milliamperes [0.1 mA])ro INTEGER .1.3.6.1.4.1.6926.1.41.12.2.1.10 |
oaLdOAmplifierCardPump2CurrentThe Optical Amplifier Pump 2 Current
(in units of 1/10 milliamperes [0.1 mA])ro INTEGER .1.3.6.1.4.1.6926.1.41.12.2.1.11 |
oaLdOAmplifierCardPump2MaxCurrentThe Optical Amplifier Pump 2 Maximum Current
(in units of 1/10 milliamperes [0.1 mA])ro INTEGER .1.3.6.1.4.1.6926.1.41.12.2.1.12 |
oaLdOAmplifierCardInputPowerThe Optical Amplifier Input Optical Power
(in units of 1/100 [0.01 dBm])ro INTEGER .1.3.6.1.4.1.6926.1.41.12.2.1.13 |
oaLdOAmplifierCardOutputPowerThe Optical Amplifier Output Optical Power
(in units of 1/100 [0.01 dBm])ro INTEGER .1.3.6.1.4.1.6926.1.41.12.2.1.14 |
oaLdOAmplifierCardModuleGainThe Optical Amplifier Optical Module Gain
(in units of 1/100 [0.01 dB])ro INTEGER .1.3.6.1.4.1.6926.1.41.12.2.1.15 |
oaLdOAmplifierCardPump1PowerThe Optical Amplifier Pump 1 Power
(in units of 1/100 milliwatts [0.01 mW])ro INTEGER .1.3.6.1.4.1.6926.1.41.12.2.1.16 |
oaLdOAmplifierCardPump2PowerThe Optical Amplifier Pump 2 Power
(in units of 1/100 milliwatts [0.01 mW])ro INTEGER .1.3.6.1.4.1.6926.1.41.12.2.1.17 |
oaLdOAmplifierCardMaximumPowerThe Optical Amplifier Optical Maximum Power
(in units of 1/100 [0.01 dBm])ro INTEGER .1.3.6.1.4.1.6926.1.41.12.2.1.18 |
oaLdOAmplifierCardRatedGainThe Optical Amplifier Optical Rated Gain
(in units of 1/100 [0.01 dB])ro INTEGER .1.3.6.1.4.1.6926.1.41.12.2.1.19 |
oaLdOAmplifierCardAlarmStatusThe Optical Amplifier Alarms.
This object is organised as a bit map. Each bit represents an alarm.
If the object is zero - no alarm is active.
0x0000 ('0000 0000 0000 0000'B) - Normal (No alarm)
0x0001 ('0000 0000 0000 0001'B) - Optical Input alarm
0x0002 ('0000 0000 0000 0010'B) - Optical Output alarm
0x0004 ('0000 0000 0000 0100'B) - Optical Input 2
0x0008 ('0000 0000 0000 1000'B) - Module Temperature alarm
0x0010 ('0000 0000 0001 0000'B) - Pump Temperature
0x0020 ('0000 0000 0010 0000'B) - Pump Drive Current alarm
0x0040 ('0000 0000 0100 0000'B) - Power Supply Voltage alarm
0x0080 ('0000 0000 1000 0000'B) - Auto-shutdown
0x0100 ('0000 0001 0000 0000'B) - Reflected Power High alarm
Any combination of the bits represent the combination of the alarmsro OCTET STRING .1.3.6.1.4.1.6926.1.41.12.2.1.20 |
oaLdOAmplifierCardAttributesThe Optical Amplifier Attributes.
This object is organised as a bit map. Each bit represents one existed attribute.
0x0000 ('0000 0000 0000 0000'B) - No additional attributes
0x0001 ('0000 0000 0000 0001'B) - Dispersion attribute is on
0x0002 ('0000 0000 0000 0010'B) - Mid Stage attribute is on
0x0004 ('0000 0000 0000 0100'B) - Tunable Gain attribute is on
0x0008 ('0000 0000 0000 1000'B) - High Power attribute is on
0x0010 ('0000 0000 0001 0000'B) - Double slots module is on
Other bitmasks are reserved.
Any combination of the bits represent the combination of the attributesro OCTET STRING .1.3.6.1.4.1.6926.1.41.12.2.1.25 |
oaLdOAmplifierCardOperationModeThe Optical Amplifier Operational Moderw Enumeration .1.3.6.1.4.1.6926.1.41.12.2.1.30 |
oaLdOAmplifierCardRunModeThe Optical Amplifier Run Moderw Enumeration .1.3.6.1.4.1.6926.1.41.12.2.1.31 |
oaLdOAmplifierCardAutoShutdownStateThe Optical Amplifier Auto Shutdown Statusrw Enumeration .1.3.6.1.4.1.6926.1.41.12.2.1.32 |
oaLdOAmplifierCardInputThresholdThe Optical Amplifier Input Threshold
(in units of 1/100 [0.01 dBm])rw INTEGER .1.3.6.1.4.1.6926.1.41.12.2.1.33 |
oaLdOAmplifierCardOutputThresholdThe Optical Amplifier Output Threshold
(in units of 1/100 [0.01 dBm])rw INTEGER .1.3.6.1.4.1.6926.1.41.12.2.1.34 |
oaLdOAmplifierCardShutdownThresholdThe Optical Amplifier Shutdown Threshold
(in units of 1/100 [0.01 dBm])rw INTEGER .1.3.6.1.4.1.6926.1.41.12.2.1.35 |
oaLdOAmplifierCardLowTempThresholdThe Optical Amplifier Low Temperature Threshold
(in units of 1/10 Degrees Celsius [0.1 C])rw INTEGER .1.3.6.1.4.1.6926.1.41.12.2.1.36 |
oaLdOAmplifierCardHighTempThresholdThe Optical Amplifier High Temperature Threshold
(in units of 1/10 Degrees Celsius [0.1 C])rw INTEGER .1.3.6.1.4.1.6926.1.41.12.2.1.37 |
oaLdOAmplifierCardPump1CurrentSetThe Optical Amplifier Pump 1 Current Setting
(in units of 1/10 milliamperes [0.1 mA])rw INTEGER .1.3.6.1.4.1.6926.1.41.12.2.1.38 |
oaLdOAmplifierCardPump2CurrentSetThe Optical Amplifier Pump 2 Current Setting
(in units of 1/10 milliamperes [0.1 mA])rw INTEGER .1.3.6.1.4.1.6926.1.41.12.2.1.39 |
oaLdOAmplifierCardOutputPowerSetThe Optical Amplifier Output Power Setting
(in units of 1/100 [0.01 dBm])rw INTEGER .1.3.6.1.4.1.6926.1.41.12.2.1.40 |
oaLdOAmplifierCardGainSetThe Optical Amplifier Gain Setting
(in units of 1/100 [0.01 dB])rw INTEGER .1.3.6.1.4.1.6926.1.41.12.2.1.41 |
oaLdOAmplifierCardPumpOutputPowerThe C-Band Raman Amplifier Pump Output Power
(in units of of 1/100 [0.01 dBm])ro INTEGER .1.3.6.1.4.1.6926.1.41.12.2.1.42 |
oaLdOAmplifierCardReflectedPowerThe C-Band Raman Amplifier Reflected Pump Power
(in units of 1/100 [0.01 dBm])ro INTEGER .1.3.6.1.4.1.6926.1.41.12.2.1.43 |
oaLdOAmplifierPumpInfoTableTable of installed Lambda Driver C-Band Raman Amplifier Pumps SEQUENCE OF OaLdOAmplifierPumpInfoEntry .1.3.6.1.4.1.6926.1.41.12.3 |
oaLdOAmplifierPumpInfoEntryInstalled Lambda Driver Optical Amplifier Pumps OaLdOAmplifierPumpInfoEntry .1.3.6.1.4.1.6926.1.41.12.3.1 |
oaLdOAmplifierPumpNumberThe pump#. An index from 1 to The number of pumpsro INTEGER .1.3.6.1.4.1.6926.1.41.12.3.1.2 |
oaLdOAmplifierPumpCurrentThe C-Band Raman Amplifier Pump Drive Current
(in units of mA)ro INTEGER .1.3.6.1.4.1.6926.1.41.12.3.1.3 |
oaLdOAmplifierPumpPowerThe C-Band Raman Amplifier Pump Output Power
(in units of mW)ro INTEGER .1.3.6.1.4.1.6926.1.41.12.3.1.4 |
oaLdOAmplifierPumpLaserTempThe C-Band Raman Amplifier Pump Laser Temperature
(in units of 1/10 [0.1 deg C])ro INTEGER .1.3.6.1.4.1.6926.1.41.12.3.1.5 |
oaLdOAmplifierCompInterfaceCountThe number of modules in the system which are Optical Amplifier compatible.ro INTEGER .1.3.6.1.4.1.6926.1.41.12.10 |
oaLdOcmCardInfo OBJECT IDENTIFIER .1.3.6.1.4.1.6926.1.41.13 |
oaLdOcmCardPortsInfoTableInformation table of installed OCM Cards SEQUENCE OF OaLdOcmCardPortsInfoEntry .1.3.6.1.4.1.6926.1.41.13.2 |
oaLdOcmCardPortsInfoEntryInstalled OCM Cards OaLdOcmCardPortsInfoEntry .1.3.6.1.4.1.6926.1.41.13.2.1 |
oaLdOcmCardPortsSlotNumberThe slot#. An index from 1 to The number of slotsro INTEGER .1.3.6.1.4.1.6926.1.41.13.2.1.1 |
oaLdOcmCardPortsPortNumberThe port#. An index from 1 to The number of portsro INTEGER .1.3.6.1.4.1.6926.1.41.13.2.1.2 |
oaLdOcmCardPortsSectionLofLoss of Frame (LOF) indication.ro Enumeration .1.3.6.1.4.1.6926.1.41.13.2.1.3 |
oaLdOcmCardPortsSectionLosLoss of Signal (LOS) indication.ro Enumeration .1.3.6.1.4.1.6926.1.41.13.2.1.4 |
oaLdOcmCardPortsSectionLocLoss of Clock (LOC) indication.ro Enumeration .1.3.6.1.4.1.6926.1.41.13.2.1.5 |
oaLdOcmCardPortsSectionB1B1 bytes monitoring for correct Bit Interleaved parity (BIP-8)
values. BIP-8 is calculated over all bytes of each frame
before descrambling.ro Counter .1.3.6.1.4.1.6926.1.41.13.2.1.6 |
oaLdOcmCardPortsLineAisLine (AIS) - Alarm Indication Signal.ro Enumeration .1.3.6.1.4.1.6926.1.41.13.2.1.7 |
oaLdOcmCardPortsLineRdiLine (RDI) - Remote Defect Indication. A returned signal to indicate upon
LOS, LOF or AIS.ro Enumeration .1.3.6.1.4.1.6926.1.41.13.2.1.8 |
oaLdOcmCardPortsLineB2B2 bytes monitoring for correct Bit Interleaved parity (BIP-8)
values. BIP-384 is calculated over all received data after descrambling.ro Counter .1.3.6.1.4.1.6926.1.41.13.2.1.9 |
oaLdOcmCardPortsLineFebeLine FEBE (REI) - The number of B2 errors that were detected by the remote
terminal in it's received signal.ro Counter .1.3.6.1.4.1.6926.1.41.13.2.1.10 |
oaLdOcmCardPortsPathAisPATH (AIS) - PATH Alarm Indication Signal.ro Enumeration .1.3.6.1.4.1.6926.1.41.13.2.1.11 |
oaLdOcmCardPortsPathLopPATH (LOP) - Loss Of Pointer. PATH indication of the pointer state.ro Enumeration .1.3.6.1.4.1.6926.1.41.13.2.1.12 |
oaLdOcmCardPortsPathB3B3 bytes monitoring for correct Bit Interleaved parity (BIP-8)
values.ro Counter .1.3.6.1.4.1.6926.1.41.13.2.1.13 |
oaLdOcmCardPortsPathPseThis is an interperter justification counter that counts every
positive justification.ro Counter .1.3.6.1.4.1.6926.1.41.13.2.1.14 |
oaLdOcmCardPortsPathNseThis is an interperter justification counter that counts every
negative justification.ro Counter .1.3.6.1.4.1.6926.1.41.13.2.1.15 |
oaLdRoadmInfo OBJECT IDENTIFIER .1.3.6.1.4.1.6926.1.41.15 |
oaLdRoadmInfoTableTable of installed Lambda Driver ROADM Modules SEQUENCE OF OaLdRoadmInfoEntry .1.3.6.1.4.1.6926.1.41.15.2 |
oaLdRoadmInfoEntryInstalled Lambda Driver ROADM Modules OaLdRoadmInfoEntry .1.3.6.1.4.1.6926.1.41.15.2.1 |
oaLdRoadmSlotNumberThe slot#. An index from 1 to The number of slotsro INTEGER .1.3.6.1.4.1.6926.1.41.15.2.1.1 |
oaLdRoadmTypeThe ROADM module type
each module type gets a unique id numberro INTEGER .1.3.6.1.4.1.6926.1.41.15.2.1.2 |
oaLdRoadmDescriptionThe description of the ROADM module typero DisplayString .1.3.6.1.4.1.6926.1.41.15.2.1.3 |
oaLdRoadmSerialNumberThe ROADM module serial numberro DisplayString .1.3.6.1.4.1.6926.1.41.15.2.1.4 |
oaLdRoadmBoardVersionThe ROADM module board versionro DisplayString .1.3.6.1.4.1.6926.1.41.15.2.1.5 |
oaLdRoadmFpgaVersionThe ROADM module FPGA versionro DisplayString .1.3.6.1.4.1.6926.1.41.15.2.1.6 |
oaLdRoadmBootVersionThe ROADM module Boot versionro DisplayString .1.3.6.1.4.1.6926.1.41.15.2.1.7 |
oaLdRoadmMcVersionThe ROADM module MicroController code versionro DisplayString .1.3.6.1.4.1.6926.1.41.15.2.1.8 |
oaLdRoadmDateThe ROADM module manufacture datero DisplayString .1.3.6.1.4.1.6926.1.41.15.2.1.9 |
oaLdRoadmStatusThe ROADM module statusro Enumeration .1.3.6.1.4.1.6926.1.41.15.2.1.15 |
oaLdRoadmComOutPortAdminStatusThe ROADM COM Output port admin status
2 - Normal - all ports are configured
as their oaLdRoadmPortAdminState;
3 - Disable - all ports are disabled.rw Enumeration .1.3.6.1.4.1.6926.1.41.15.2.1.16 |
oaLdRoadmFailThe ROADM module fail status
2 - Module works OK
3 - Module failro Enumeration .1.3.6.1.4.1.6926.1.41.15.2.1.17 |
oaLdRoadmTemperatureThe ROADM module temperature or
The WSS ROADM zone1 temperature.
Units: 0.1 [C]ro INTEGER .1.3.6.1.4.1.6926.1.41.15.2.1.18 |
oaLdRoadmHeaterModeThe ROADM module AWG heater enable mode
2 - AWG Heater On
3 - AWG Heater Offro Enumeration .1.3.6.1.4.1.6926.1.41.15.2.1.19 |
oaLdRoadmHeaterTemperatureThe ROADM module AWG heater temperature
Units: 0.1 [C]ro INTEGER .1.3.6.1.4.1.6926.1.41.15.2.1.20 |
oaLdRoadmSpacingThe ROADM module channel spacingrw Enumeration .1.3.6.1.4.1.6926.1.41.15.2.1.21 |
oaLdRoadmNumberOfChPortsNumber of channel ports at ROADM card.ro INTEGER .1.3.6.1.4.1.6926.1.41.15.2.1.22 |
oaLdRoadmPowerEqualizationMakes procedure of automatic Power Equalization.rw Enumeration .1.3.6.1.4.1.6926.1.41.15.2.1.23 |
oaLdRoadmZone2TemperatureThe WSS ROADM zone2 temperature
Units: 0.1 [C]ro INTEGER .1.3.6.1.4.1.6926.1.41.15.2.1.24 |
oaLdRoadmZone3TemperatureThe WSS ROADM zone3 temperature
Units: 0.1 [C]ro INTEGER .1.3.6.1.4.1.6926.1.41.15.2.1.25 |
oaLdRoadmNumberOfChannelsNumber of channels at ROADM card.ro INTEGER .1.3.6.1.4.1.6926.1.41.15.2.1.26 |
oaLdRoadmReconfigureSwitchMakes procedure of implementing switch configuration on hardware.rw Enumeration .1.3.6.1.4.1.6926.1.41.15.2.1.27 |
oaLdRoadmFirstChannelThe value of the First Lambda Channel Number in the interval
of possible Lambda Channels Numbers.
For the WSS ROADM Modules the value is equal to
Lambda Channel Number multiplied by 1000.
Example: Lambda Channel Number 20 will apear as 20000.
For other ROADM Modules value equal to '0'ro INTEGER .1.3.6.1.4.1.6926.1.41.15.2.1.28 |
oaLdRoadmLastChannelThe value of the Last Lambda Channel Number in the interval
of possible Lambda Channels Numbers.
For the WSS ROADM Modules the value is equal to
Lambda Channel Number multiplied by 1000.
Example: Lambda Channel Number 20 will apear as 20000.
For other ROADM Modules value equal to '0'ro INTEGER .1.3.6.1.4.1.6926.1.41.15.2.1.29 |
oaLdRoadmDefaultConfigurationRestore default Port Channel Configuration for Module.
Setting 'restoreDefault' for Modules EM1600-WSS2Q and EM1600-WSS4D
will block all Channels configured on the Ports except those of
external Wave Blockers.rw Enumeration .1.3.6.1.4.1.6926.1.41.15.2.1.30 |
oaLdRoadmMonitorTableTable of installed Lambda Driver ROADM Modules Monitoring SEQUENCE OF OaLdRoadmMonitorEntry .1.3.6.1.4.1.6926.1.41.15.3 |
oaLdRoadmMonitorEntryInstalled Lambda Driver ROADM Modules Monitoring OaLdRoadmMonitorEntry .1.3.6.1.4.1.6926.1.41.15.3.1 |
oaLdRoadmMonitorSlotNumberThe slot#. An index from 1 to The number of slotsro INTEGER .1.3.6.1.4.1.6926.1.41.15.3.1.1 |
oaLdRoadmMonitorComInputPowerThe ROADM module COM IN power
Units: 0.1 [dBm]ro INTEGER .1.3.6.1.4.1.6926.1.41.15.3.1.2 |
oaLdRoadmMonitorComOutputPowerThe ROADM module COM OUT power
Units: 0.1 [dBm]ro INTEGER .1.3.6.1.4.1.6926.1.41.15.3.1.3 |
oaLdRoadmMonitorExpInputPowerThe ROADM module Input power (EXP IN)
Units: 0.1 [dBm]ro INTEGER .1.3.6.1.4.1.6926.1.41.15.3.1.4 |
oaLdRoadmMonitorExpOutputPowerThe ROADM module EXP OUT power
Units: 0.1 [dBm]ro INTEGER .1.3.6.1.4.1.6926.1.41.15.3.1.5 |
oaLdRoadmMonitorDropOutputPowerThe ROADM module DROP OUT power
Units: 0.1 [dBm]ro INTEGER .1.3.6.1.4.1.6926.1.41.15.3.1.6 |
oaLdRoadmChannelTableTable of installed Lambda Driver ROADM Modules Ports SEQUENCE OF OaLdRoadmChannelEntry .1.3.6.1.4.1.6926.1.41.15.4 |
oaLdRoadmChannelEntryInstalled Lambda Driver ROADM Modules Channels OaLdRoadmChannelEntry .1.3.6.1.4.1.6926.1.41.15.4.1 |
oaLdRoadmChannelSlotNumberThe slot#. An index from 1 to The number of slotsro INTEGER .1.3.6.1.4.1.6926.1.41.15.4.1.1 |
oaLdRoadmChannelLambdaChannelThe ROADM module Channel Lambda Channel Number multiplied by 1000.
Example: channel 20 will apear as 20000.ro INTEGER .1.3.6.1.4.1.6926.1.41.15.4.1.2 |
oaLdRoadmChannelPortNumberThe port#. An index from 1 to The number of ports.ro INTEGER .1.3.6.1.4.1.6926.1.41.15.4.1.3 |
oaLdRoadmChannelWavelengthThe ROADM module Port Channel Wavelenth,
Units: 0.01 Nano Meter[nm]ro INTEGER .1.3.6.1.4.1.6926.1.41.15.4.1.4 |
oaLdRoadmChannelDropPortNumberThe number of Drop Port, connected to this Channel.rw INTEGER .1.3.6.1.4.1.6926.1.41.15.4.1.5 |
oaLdRoadmChannelDropAttenuationThe ROADM module port VOA Drop Attenuation,
integer from 0 till 150, Units: 0.1 [dB]rw INTEGER .1.3.6.1.4.1.6926.1.41.15.4.1.6 |
oaLdRoadmChannelConfigStatusThe status of ROADM module Channel.
Set 'virtual' if configuration didn't save in HW.ro Enumeration .1.3.6.1.4.1.6926.1.41.15.4.1.7 |
oaLdRoadmChannelPower1The ROADM module Channel Power,
(Drop Peak Power for module EM1600-WSS9,
Com Output West Total Power for module EM1600-WSS2Q,
Com Output Total Power for module EM1600-WSS4D)
Units: 0.1 [dBm]ro INTEGER .1.3.6.1.4.1.6926.1.41.15.4.1.8 |
oaLdRoadmChannelPower2The ROADM module Channel Power,
(Add Peak Power for module EM1600-WSS9,
Com Output East Total Power for module EM1600-WSS2Q,
Com Input Total Power for module EM1600-WSS4D)
Units: 0.1 [dBm]ro INTEGER .1.3.6.1.4.1.6926.1.41.15.4.1.9 |
oaLdRoadmChannelDropPeakFrequencyThe ROADM module Channel Frequency, (Drop Peak Frequency)
Units: 0.0001 [THz]ro INTEGER .1.3.6.1.4.1.6926.1.41.15.4.1.10 |
oaLdRoadmChannelAddPeakFrequencyThe ROADM module Channel Frequency, (Add Peak Frequency)
Units: 0.0001 [THz]ro INTEGER .1.3.6.1.4.1.6926.1.41.15.4.1.11 |
oaLdRoadmChannelAddAttenuationThe ROADM module port VOA Add Attenuation,
integer from 0 till 250, Units: 0.1 [dB]rw INTEGER .1.3.6.1.4.1.6926.1.41.15.4.1.12 |
oaLdRoadmChannelGridFrequencyThe ROADM module Channel Grid Frequency
Units: 0.0001 [THz]ro INTEGER .1.3.6.1.4.1.6926.1.41.15.4.1.13 |
oaLdRoadmChannelSpacingThe ROADM Channel Spacingro Enumeration .1.3.6.1.4.1.6926.1.41.15.4.1.14 |
oaLdRoadmThresholdTableTable of installed Lambda Driver ROADM Modules Thresholds SEQUENCE OF OaLdRoadmThresholdEntry .1.3.6.1.4.1.6926.1.41.15.5 |
oaLdRoadmThresholdEntryInstalled Lambda Driver ROADM Modules Thresholds OaLdRoadmThresholdEntry .1.3.6.1.4.1.6926.1.41.15.5.1 |
oaLdRoadmThresholdSlotNumberThe slot#. An index from 1 to The number of slotsro INTEGER .1.3.6.1.4.1.6926.1.41.15.5.1.1 |
oaLdRoadmThresholdIndexThe threshold index An index from 1 to The number of thresholdsro Enumeration .1.3.6.1.4.1.6926.1.41.15.5.1.2 |
oaLdRoadmThresholdAwgTempThe ROADM module AWG temperature threshold
Units: 0.1 [C]ro INTEGER .1.3.6.1.4.1.6926.1.41.15.5.1.3 |
oaLdRoadmThresholdTempThe ROADM module temperature threshold
Units: 0.1 [C]ro INTEGER .1.3.6.1.4.1.6926.1.41.15.5.1.4 |
oaLdRoadmThresholdComInputPwrThe ROADM module COM IN power threshold
(demultiplexer channel output)
Units: 0.1 [dBm]ro INTEGER .1.3.6.1.4.1.6926.1.41.15.5.1.5 |
oaLdRoadmThresholdComOutputPwrThe ROADM module COM OUT power threshold
Units: 0.1 [dBm]ro INTEGER .1.3.6.1.4.1.6926.1.41.15.5.1.6 |
oaLdRoadmThresholdExpInputPwrThe ROADM module input power (EXT IN) threshold
Units: 0.1 [dBm]ro INTEGER .1.3.6.1.4.1.6926.1.41.15.5.1.7 |
oaLdRoadmThresholdExpOutputPwrThe ROADM module EXP OUT power threshold
Units: 0.1 [dBm]ro INTEGER .1.3.6.1.4.1.6926.1.41.15.5.1.8 |
oaLdRoadmThresholdDropOutputPwrThe ROADM module DROP OUT power threshold
Units: 0.1 [dBm]ro INTEGER .1.3.6.1.4.1.6926.1.41.15.5.1.9 |
oaLdRoadmPortInfoTableTable of installed Lambda Driver ROADM Modules Ports SEQUENCE OF OaLdRoadmPortInfoEntry .1.3.6.1.4.1.6926.1.41.15.6 |
oaLdRoadmPortInfoEntryInstalled Lambda Driver ROADM Modules Ports OaLdRoadmPortInfoEntry .1.3.6.1.4.1.6926.1.41.15.6.1 |
oaLdRoadmPortSlotNumberThe slot#. An index from 1 to The number of slotsro INTEGER .1.3.6.1.4.1.6926.1.41.15.6.1.1 |
oaLdRoadmPortPortNumberThe port#. An index from 1 to The number of ports (channels)ro INTEGER .1.3.6.1.4.1.6926.1.41.15.6.1.2 |
oaLdRoadmPortAdminStateThe ROADM module administration state of the Port,
Add, Pass through or Dark.
Setting 'dark' for Modules EM1600-WSS2Q and EM1600-WSS4D
will block all Channels configured on the Port.rw Enumeration .1.3.6.1.4.1.6926.1.41.15.6.1.3 |
oaLdRoadmPortServiceStateThe ROADM module switch setting of the port,
Add, Pass through or Darkro Enumeration .1.3.6.1.4.1.6926.1.41.15.6.1.4 |
oaLdRoadmPortPowerThe ROADM module port input power
(Multiplexer Input Power for module EM1600-ROADM40,
Com Input Total Power for module EM1600-WSS4D).
Units: 0.1 [dBm]ro INTEGER .1.3.6.1.4.1.6926.1.41.15.6.1.5 |
oaLdRoadmPortVoaAttenuationAddThe ROADM module port VOA add attenuation,
integer from 0 till 250, Units: 0.1 [dB]rw INTEGER .1.3.6.1.4.1.6926.1.41.15.6.1.7 |
oaLdRoadmPortVoaAttenuationPassThe ROADM module port VOA pass attenuation,
integer from 0 till 250, Units: 0.1 [dB]rw INTEGER .1.3.6.1.4.1.6926.1.41.15.6.1.8 |
oaLdRoadmPortVoaAttenuationDropThe ROADM module port VOA drop attenuation,
integer from 0 till 250, Units: 0.1 [dB]rw INTEGER .1.3.6.1.4.1.6926.1.41.15.6.1.9 |
oaLdRoadmPortChannelWavelengthThe ROADM module port channel wavelenth,
Units: 0.01 Nano Meter[nm]rw INTEGER .1.3.6.1.4.1.6926.1.41.15.6.1.10 |
oaLdRoadmPortLambdaChannelThe ROADM module port lambda channel number multiplied by 1000.
Example: channel 20 will apear as 20000.ro INTEGER .1.3.6.1.4.1.6926.1.41.15.6.1.11 |
oaLdRoadmPortVoaMinAttenuationThe module port VOA minimum attenuation value,
integer in Units: 0.1 [dB]rw INTEGER .1.3.6.1.4.1.6926.1.41.15.6.1.12 |
oaLdRoadmPortVoaMaxAttenuationThe module port VOA maximum attenuation value,
integer in Units: 0.1 [dB]rw INTEGER .1.3.6.1.4.1.6926.1.41.15.6.1.13 |
oaLdRoadmPortNamePort Name string (as: Add-Drop West, ExpIn-ExpOut East, Com Out, WB1 In-Out etc.)ro DisplayString .1.3.6.1.4.1.6926.1.41.15.6.1.14 |
oaLdRoadmPortPowerSupportedOptical Power value exists for this port.ro Enumeration .1.3.6.1.4.1.6926.1.41.15.6.1.15 |
oaLdRoadmPortTotalPowerThe ROADM module Port Total Power value.
Units: 0.1 [dBm]ro INTEGER .1.3.6.1.4.1.6926.1.41.15.6.1.16 |
oaLdRoadmPortChanListList of Lambda Channels detected in the Port.
Number of bytes in the Octet String is equal to the value
of [oaLdRoadmNumberOfChannels].
Each Bite in the Octet String includes information about
existence of the Lambda Channel in the Port
(0=does not exist, 1=exists).ro OCTET STRING .1.3.6.1.4.1.6926.1.41.15.6.1.17 |
oaLdRoadmPortChanSrcPortListList of Input Port Numbers which Lambda Channels were detected in the Port.
Number of bytes in the Octet String is equal to the value
of [oaLdRoadmNumberOfChannels].
Each Bite in the Octet String includes Input Port Number or
'0' for Output Port or other not relevant Ports.ro OCTET STRING .1.3.6.1.4.1.6926.1.41.15.6.1.18 |
oaLdRoadmPortThresholdTableTable of installed Lambda Driver ROADM Modules Ports Threshold SEQUENCE OF OaLdRoadmPortThresholdEntry .1.3.6.1.4.1.6926.1.41.15.7 |
oaLdRoadmPortThresholdEntryInstalled Lambda Driver ROADM Modules Ports Threshold OaLdRoadmPortThresholdEntry .1.3.6.1.4.1.6926.1.41.15.7.1 |
oaLdRoadmPortThresholdSlotIndexThe slot#. An index from 1 to The number of slotsro INTEGER .1.3.6.1.4.1.6926.1.41.15.7.1.1 |
oaLdRoadmPortThresholdPortIndexThe port#. An index from 1 to The number of ports (channels)ro INTEGER .1.3.6.1.4.1.6926.1.41.15.7.1.2 |
oaLdRoadmPortThresholdIndexThe threshold index An index from 1 to The number of thresholdsro Enumeration .1.3.6.1.4.1.6926.1.41.15.7.1.3 |
oaLdRoadmPortThresholdPwrThe ROADM module port power threshold,
(multiplexer input power)
Units: 0.1 [dBm]ro INTEGER .1.3.6.1.4.1.6926.1.41.15.7.1.4 |
oaLdPortsCrossConnect OBJECT IDENTIFIER .1.3.6.1.4.1.6926.1.41.16 |
oaLdPortsCrossConnectTableTable of installed Cross Connect Ports SEQUENCE OF OaLdPortsCrossConnectEntry .1.3.6.1.4.1.6926.1.41.16.1 |
oaLdPortsCrossConnectEntryInstalled Cross Connect Ports OaLdPortsCrossConnectEntry .1.3.6.1.4.1.6926.1.41.16.1.1 |
oaLdPortsCrossConnectSlotNumberThe Cross Connect module slot number.ro INTEGER .1.3.6.1.4.1.6926.1.41.16.1.1.1 |
oaLdPortsCrossConnectPortNumberThe port# from Cross Connect module.ro INTEGER .1.3.6.1.4.1.6926.1.41.16.1.1.2 |
oaLdPortsCrossConnectNumberNumber of port which is defined as connected with this port.
The number is 0, if this port doesn't connectedrw INTEGER .1.3.6.1.4.1.6926.1.41.16.1.1.3 |
oaLdPortsCrossConnectActionAction to connect or disconnect this port with number.
Get always returns other. For set have to be together with object oaLdPortsCrossConnectNumber.rw Enumeration .1.3.6.1.4.1.6926.1.41.16.1.1.4 |
oaLdOpticalMonitor OBJECT IDENTIFIER .1.3.6.1.4.1.6926.1.41.17 |
oaLdMeasurmentPointsTableTable of optical peaks and Spectral points numbers. SEQUENCE OF OaLdMeasurmentPointsEntry .1.3.6.1.4.1.6926.1.41.17.1 |
oaLdMeasurmentPointsEntryTable of optical peaks and Spectral points numbers. OaLdMeasurmentPointsEntry .1.3.6.1.4.1.6926.1.41.17.1.1 |
oaLdMeasurmentPointsSlotNumberThe slot#. An index from 1 to The number of slotsro INTEGER .1.3.6.1.4.1.6926.1.41.17.1.1.1 |
oaLdMeasurmentPointsPortNumberThe port#. An index from 1 to The number of ports.ro INTEGER .1.3.6.1.4.1.6926.1.41.17.1.1.2 |
oaLdPeaksNumberThe number of detected optical peaks.ro INTEGER .1.3.6.1.4.1.6926.1.41.17.1.1.3 |
oaLdTotalBandPowerThe total band power. Units: 0.1 [dBm]ro INTEGER .1.3.6.1.4.1.6926.1.41.17.1.1.4 |
oaLdPeaksMonitorTableTable of Spectral optical Peaks Monitoring. SEQUENCE OF OaLdPeaksMonitorEntry .1.3.6.1.4.1.6926.1.41.17.2 |
oaLdPeaksMonitorEntrySpectral optical Peaks Monitoring OaLdPeaksMonitorEntry .1.3.6.1.4.1.6926.1.41.17.2.1 |
oaLdPeaksMonitorSlotNumberThe slot#. An index from 1 to The number of slotsro INTEGER .1.3.6.1.4.1.6926.1.41.17.2.1.1 |
oaLdPeaksMonitorPortNumberThe port#. An index from 1 to The number of ports.ro INTEGER .1.3.6.1.4.1.6926.1.41.17.2.1.2 |
oaLdPeaksMonitorPeakNumberThe spectral peak#.
An index from 1 to The number of measured spectral peaks.ro INTEGER .1.3.6.1.4.1.6926.1.41.17.2.1.3 |
oaLdPeaksMonitorPeakFreqThe peak frequency. Units: 0.0001 [THz].ro INTEGER .1.3.6.1.4.1.6926.1.41.17.2.1.4 |
oaLdPeaksMonitorPeakWavelengthThe peak wavelength. Units: 0.01 [nm].ro INTEGER .1.3.6.1.4.1.6926.1.41.17.2.1.5 |
oaLdPeaksMonitorPeakPowerThe peak power. Units: 0.1 [dBm]ro INTEGER .1.3.6.1.4.1.6926.1.41.17.2.1.6 |
oaLdPeaksMonitorTotalPowerThe total power. Units: 0.1 [dBm]ro INTEGER .1.3.6.1.4.1.6926.1.41.17.2.1.7 |
oaLdPeaksMonitorOsnrThe peak OSNR. Units: 0.1 [dB]ro INTEGER .1.3.6.1.4.1.6926.1.41.17.2.1.8 |
oaLdPeaksMonitorLeftValleyFreqThe peak Left valley Frequency. Units: 0.0001 [THz].ro INTEGER .1.3.6.1.4.1.6926.1.41.17.2.1.9 |
oaLdPeaksMonitorLeftValleyPowerThe peak Left valley Power. Units: 0.1 [dBm].ro INTEGER .1.3.6.1.4.1.6926.1.41.17.2.1.10 |
oaLdPeaksMonitorRightValleyFreqThe peak Right valley Frequency. Units: 0.0001 [THz].ro INTEGER .1.3.6.1.4.1.6926.1.41.17.2.1.11 |
oaLdPeaksMonitorRightValleyPowerThe peak Right valley Power. Units: 0.1 [dBm].ro INTEGER .1.3.6.1.4.1.6926.1.41.17.2.1.12 |