OA-SFP-MIB
AI MIB Summary
The OA-SFP-MIB enables SNMP-based monitoring of Small Form Factor Pluggable (SFP) transceiver parameters, including optical power levels, temperature, supply voltage, and module presence status, by implementing objects defined in the SFP Multi-Source Agreement (MSA). This module facilitates granular diagnostics and fault detection for pluggable optical interfaces on network hardware supporting the OA-SFP standard.
This MIB defines objects of pluggable modules (such as SFP modules). The MIB objects defined in this MIB are based on the Small Form Factor Pluggable (SFP) Transceiver MultiSource Agreement(MSA).
Main OID:
oaSfpMib.1.3.6.1.4.1.6926.1.18
139
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
139 total| Object Name |
|---|
oaccess OBJECT IDENTIFIER .1.3.6.1.4.1.6926 |
oaManagement OBJECT IDENTIFIER .1.3.6.1.4.1.6926.1 |
oaSfpMibThis MIB defines objects of pluggable modules
(such as SFP modules). The MIB objects defined in this MIB are
based on the Small Form Factor Pluggable (SFP) Transceiver
MultiSource Agreement(MSA). MODULE-IDENTITY .1.3.6.1.4.1.6926.1.18 |
SNMPv2-SMIThis MIB defines objects of pluggable modules
(such as SFP modules). The MIB objects defined in this MIB are
based on the Small Form Factor Pluggable (SFP) Transceiver
MultiSource Agreement(MSA). NOTIFICATION-TYPE .1.3.6.1.4.1.6926.1.18 |
oaAlarmNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.6926.1.18.0 |
msaPortRxLossAlarmOnThe SNMP trap that is generated when
MSA Port Rx Loss Average Optical Power Alarm has been raised. NOTIFICATION-TYPE .1.3.6.1.4.1.6926.1.18.0.68 |
msaPortRxLossAlarmOffThe SNMP trap that is generated when
MSA Port Rx Loss Average Optical Power Alarm has been lowered. NOTIFICATION-TYPE .1.3.6.1.4.1.6926.1.18.0.69 |
msaPortTxLaserWlAlarmOnThe SNMP trap that is generated when
MSA Port WDM Tx Laser Wavelength Alarm has been raised. NOTIFICATION-TYPE .1.3.6.1.4.1.6926.1.18.0.70 |
msaPorTxLaserWltAlarmOffThe SNMP trap that is generated when
MSA Port WDM Tx Laser Wavelength Alarm has been lowered. NOTIFICATION-TYPE .1.3.6.1.4.1.6926.1.18.0.71 |
msaPortTxModulatorTempAlarmOnThe SNMP trap that is generated when
MSA Port WDM Tx Modulator Temperature Alarm has been raised. NOTIFICATION-TYPE .1.3.6.1.4.1.6926.1.18.0.72 |
msaPortTxModulatorTempAlarmOffThe SNMP trap that is generated when
MSA Port WDM Tx Modulator Temperature Alarm has been lowered. NOTIFICATION-TYPE .1.3.6.1.4.1.6926.1.18.0.73 |
msaPortTxLaserPowerAlarmOnThe SNMP trap that is generated when
MSA Port WDM Tx Laser Power Alarm has been raised. NOTIFICATION-TYPE .1.3.6.1.4.1.6926.1.18.0.74 |
msaPortTxLaserPowerAlarmOffThe SNMP trap that is generated when
MSA Port WDM Tx Laser Power Alarm has been lowered. NOTIFICATION-TYPE .1.3.6.1.4.1.6926.1.18.0.75 |
msaPortTxPllLockAlarmOnThe SNMP trap that is generated when
MSA Port WDM Tx PLL Lock Alarm has been raised. NOTIFICATION-TYPE .1.3.6.1.4.1.6926.1.18.0.76 |
msaPortTxPllLockAlarmOffThe SNMP trap that is generated when
MSA Port WDM Tx PLL Lock Alarm has been lowered. NOTIFICATION-TYPE .1.3.6.1.4.1.6926.1.18.0.77 |
msaPortTxLaserTempAlarmOnThe SNMP trap that is generated when
MSA Port WDM Tx Laser Temperature Alarm has been raised. NOTIFICATION-TYPE .1.3.6.1.4.1.6926.1.18.0.78 |
msaPortTxLaserTempAlarmOffThe SNMP trap that is generated when
MSA Port WDM Tx Laser Temperature Alarm has been lowered. NOTIFICATION-TYPE .1.3.6.1.4.1.6926.1.18.0.79 |
pluggableConnectorInsertedThe SNMP trap that is generated when
a pluggable connector/device is inserted
into the specified slot and port. NOTIFICATION-TYPE .1.3.6.1.4.1.6926.1.18.0.80 |
pluggableConnectorRemovedThe SNMP trap that is generated when
a pluggable connector/device is removed
from the specified slot and port. NOTIFICATION-TYPE .1.3.6.1.4.1.6926.1.18.0.81 |
sfpXfpPortTempHighAlarmOnThe SNMP trap that is generated when
a SFP/XFP port's internal temperature exceeds high alarm level. NOTIFICATION-TYPE .1.3.6.1.4.1.6926.1.18.0.82 |
sfpXfpPortTempHighAlarmOffThe SNMP trap that is generated when
a SFP/XFP port's internal temperature returns below high alarm level. NOTIFICATION-TYPE .1.3.6.1.4.1.6926.1.18.0.83 |
sfpXfpPortTempLowAlarmOnThe SNMP trap that is generated when
a SFP/XFP port's internal temperature is below low alarm level. NOTIFICATION-TYPE .1.3.6.1.4.1.6926.1.18.0.84 |
sfpXfpPortTempLowAlarmOffThe SNMP trap that is generated when
a SFP/XFP port's internal temperature returns up low alarm level. NOTIFICATION-TYPE .1.3.6.1.4.1.6926.1.18.0.85 |
sfpXfpPortTxPowerHighAlarmOnThe SNMP trap that is generated when
a SFP/XFP port's TX output power exceeds high alarm level. NOTIFICATION-TYPE .1.3.6.1.4.1.6926.1.18.0.86 |
sfpXfpPortTxPowerHighAlarmOffThe SNMP trap that is generated when
a SFP/XFP port's TX output power returns below high alarm level. NOTIFICATION-TYPE .1.3.6.1.4.1.6926.1.18.0.87 |
sfpXfpPortTxPowerLowAlarmOnThe SNMP trap that is generated when
a SFP/XFP port's TX output power is below low alarm level. NOTIFICATION-TYPE .1.3.6.1.4.1.6926.1.18.0.88 |
sfpXfpPortTxPowerLowAlarmOffThe SNMP trap that is generated when
a SFP/XFP port's TX output power returns up low alarm level. NOTIFICATION-TYPE .1.3.6.1.4.1.6926.1.18.0.89 |
sfpXfpPortRxPowerHighAlarmOnThe SNMP trap that is generated when
a SFP/XFP port's Received power exceeds high alarm level. NOTIFICATION-TYPE .1.3.6.1.4.1.6926.1.18.0.90 |
sfpXfpPortRxPowerHighAlarmOffThe SNMP trap that is generated when
a SFP/XFP port's Received power returns below high alarm level. NOTIFICATION-TYPE .1.3.6.1.4.1.6926.1.18.0.91 |
sfpXfpPortRxPowerLowAlarmOnThe SNMP trap that is generated when
a SFP/XFP port's Received power is below low alarm level. NOTIFICATION-TYPE .1.3.6.1.4.1.6926.1.18.0.92 |
sfpXfpPortRxPowerLowAlarmOffThe SNMP trap that is generated when
a SFP/XFP port's Received power returns up low alarm level. NOTIFICATION-TYPE .1.3.6.1.4.1.6926.1.18.0.93 |
oaSfp OBJECT IDENTIFIER .1.3.6.1.4.1.6926.1.18.1 |
oaSfpMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6926.1.18.1.1 |
oaSfpCompatibleInterfaceCountThe number of ports in the system which are sfp compatiblero Integer32 .1.3.6.1.4.1.6926.1.18.1.1.1 |
oaSfpInfoTableThe sfp information table. SEQUENCE OF OaSfpInfoEntry .1.3.6.1.4.1.6926.1.18.1.1.2 |
oaSfpInfoEntryAn entry in the SFP Information Table OaSfpInfoEntry .1.3.6.1.4.1.6926.1.18.1.1.2.1 |
oaSfpInfoSlotIndexThe SFP slot numberro Integer32 .1.3.6.1.4.1.6926.1.18.1.1.2.1.1 |
oaSfpInfoPortIndexThe SFP port numberro Integer32 .1.3.6.1.4.1.6926.1.18.1.1.2.1.2 |
oaSfpInfoIdentifierThe type of serial transceiver
unknown - Unknown or unspecified
other - Vendor specific
gbic - GBIC
fixed - Module/connector soldered to motherboard
sfp - SFP transceiver
xbi300pin - 300 pin XBI
xenpak - XENPAK transceiver
xfp - XFP transceiver
xff - XFF transceiver
xfpE - XFP-E transceiver
xpak - XPAK transceiver
x2 - X2 transceiver
dsfp - DWDM SFP transceiverro Enumeration .1.3.6.1.4.1.6926.1.18.1.1.2.1.3 |
oaSfpInfoVendorSpecificIdentifierThe vendor specific identifier. This Object will be set to
value other than null only if oaSfpInfoIdentifier returns a value
of otherro DisplayString .1.3.6.1.4.1.6926.1.18.1.1.2.1.4 |
oaSfpInfoConnectorThe type of external connector provided
unknown - Unknown or unspecified
other - Vendor specific
sc - SC
fcs1cc - Fibre Channel Style 1 copper connector
fcs2cc - Fibre Channel Style 2 copper connector
bnctnc - BNC/TNC
fcch - Fibre Channel coaxial headers
fiberJack - Fiber Jack
lc
mtrj - MT-RJ
mu - MU
sg - SG
opticalPigtail - Optical Pigtail
hssdcii - HSSDC II
copperPigtail - Copper Pigtailro Enumeration .1.3.6.1.4.1.6926.1.18.1.1.2.1.8 |
oaSfpInfoVendorSpecificConnectorThe type of vendor specific Connector. This Object will be set to
value other than null only if oaSfpInfoConnector returns a value of
otherro DisplayString .1.3.6.1.4.1.6926.1.18.1.1.2.1.9 |
oaSfpInfoTransceiver10GigaEthThe 10 Giga Ethernet type of optic transceiver compliance code.ro DisplayString .1.3.6.1.4.1.6926.1.18.1.1.2.1.18 |
oaSfpInfoTransceiverInfinibandThe Infiniband type of optic transceiver compliance code.ro DisplayString .1.3.6.1.4.1.6926.1.18.1.1.2.1.19 |
oaSfpInfoTransceiverEsconThe ESCON type of optic transceiver compliance code.ro DisplayString .1.3.6.1.4.1.6926.1.18.1.1.2.1.20 |
oaSfpInfoTransceiverSonetThe SONET type of optic transceiver compliance code.ro DisplayString .1.3.6.1.4.1.6926.1.18.1.1.2.1.21 |
oaSfpInfoTransceiverEthernetThe Ethernet type of optic transceiver compliance code.ro DisplayString .1.3.6.1.4.1.6926.1.18.1.1.2.1.22 |
oaSfpInfoTransceiverFibreChannelThe Fibre Channel type of optic transceiver compliance code.ro DisplayString .1.3.6.1.4.1.6926.1.18.1.1.2.1.23 |
oaSfpInfoVendorNameThe sfp vendor name which is the full name of the corporation, a
commonly accepted abbreviation of the name of the corporation, the SCSI
company code for the corporation, or the stock exchange code for the
corporation.ro DisplayString .1.3.6.1.4.1.6926.1.18.1.1.2.1.24 |
oaSfpInfoVendorOUIThe sfp vendor organizationally unique identifier field (vendor OUI)
that contains the IEEE company identifier for the vendor. A value of
all zero in the 3 octet field indicates that the vendor OUI is
unspecifiedro DisplayString .1.3.6.1.4.1.6926.1.18.1.1.2.1.25 |
oaSfpInfoVendorPNThe sfp vendor part number (Vendor PN) or product name if the
Vendor PN is unspecified, the null string will be returnedro DisplayString .1.3.6.1.4.1.6926.1.18.1.1.2.1.26 |
oaSfpInfoVendorRevThe transceiver vendor's product revision number (Vendor Rev) if the
Vendor Rev is unspecified, the null string will be returnedro DisplayString .1.3.6.1.4.1.6926.1.18.1.1.2.1.27 |
oaSfpInfoLaserWavelengthNominal Transmitter output wavelength at room temperature.
Units: 0.01 Nano Meter(nm)ro Integer32 UNITS "0.01 Nano Meter(nm)" .1.3.6.1.4.1.6926.1.18.1.1.2.1.28 |
oaSfpTunabilityThe tunability of SFP/XFP transceiver.
unknown - Unknown about tunability feature;
tunable - Wavelength tunability feature is implemented;
nonTunable - Wavelength tunability feature is not implemented.ro Enumeration .1.3.6.1.4.1.6926.1.18.1.1.2.1.29 |
oaSfpInfoVendorSNThe Sfp vendor serial number (Vendor SN) if the Vendor SN is
unspecified, the null string will be returnedro DisplayString .1.3.6.1.4.1.6926.1.18.1.1.2.1.32 |
oaSfpInfoVendorDateThe Vendor's date. Formated: YY MM DDro DisplayString .1.3.6.1.4.1.6926.1.18.1.1.2.1.33 |
oaSfpInfoVendorSpecificLotCodeThe Vendor Specific Lot code. A null value indicates that
the lot code is unspecified.ro DisplayString .1.3.6.1.4.1.6926.1.18.1.1.2.1.34 |
oaSfpInfoVendorSpecificDataVendor Specific Information which can be read from the SFP transceiver
(Reference: SFF-8472, revision 9.3 - Registers 96-127 )ro OCTET STRING .1.3.6.1.4.1.6926.1.18.1.1.2.1.35 |
oaSfpInfoDiagnosticPowerTypeThe diagnostic monitoring receive power type in the SFP transceiver.
unknown - Unknown
avarage - Received power measurement type is avarage
oma - Received power measurement type is OMAro Enumeration .1.3.6.1.4.1.6926.1.18.1.1.2.1.36 |
oaSfpInfoDigitalDiagnosticThe diagnostic monitoring implemented in the SFP transceiver.
unknown - Unknown
digitalDiagMonitoring - Digital diagnostic monitoring
implemented.
noDigitalDiagMonitoring - Digital diagnostic monitoring
not implemented.ro Enumeration .1.3.6.1.4.1.6926.1.18.1.1.2.1.37 |
oaSfpInfoDiagnosticCalibrationThe diagnostic calibration in the SFP transceiver.
unknown - Unknown
ExternalCalibration - External Calibration
InternalCalibration - Internal Calibrationro Enumeration .1.3.6.1.4.1.6926.1.18.1.1.2.1.38 |
oaSfpInfoInstalledStatusThe current installed state of the sfp transceiver
unknown - Unknown
notInstalled - the SFP transceiver is not installed
installed - the sfp transceiver is installedro Enumeration .1.3.6.1.4.1.6926.1.18.1.1.2.1.40 |
oaSfpInfofaultStatusThe current fault state of the sfp transceiver
unknown - Unknown
fault - the sfp transceiver is faulty
operational - the sfp transceiver is working properlyro Enumeration .1.3.6.1.4.1.6926.1.18.1.1.2.1.41 |
oaSfpInfoEnableStatusThe current enable state of the sfp transceiver
unknown - Unknown
enabled - the sfp transceiver has been enabled
disabled - the sfp transceiver has been diabledro Enumeration .1.3.6.1.4.1.6926.1.18.1.1.2.1.42 |
oaSfpDiagnosticTableThe sfp real time diagnostic table. SEQUENCE OF OaSfpDiagnosticEntry .1.3.6.1.4.1.6926.1.18.1.1.3 |
oaSfpDiagnosticEntryAn entry in the SFP Real Time Diagnostic Table OaSfpDiagnosticEntry .1.3.6.1.4.1.6926.1.18.1.1.3.1 |
oaSfpDiagnosticSlotIndexThe SFP slot number Integer32 .1.3.6.1.4.1.6926.1.18.1.1.3.1.1 |
oaSfpDiagnosticPortIndexThe SFP port number Integer32 .1.3.6.1.4.1.6926.1.18.1.1.3.1.2 |
oaSfpDiagnosticTemperatureInternaly measured module temperature.
Units: 1/10 degrees Celsius (C)ro Integer32 UNITS "1/10 degrees Celsius (C)" .1.3.6.1.4.1.6926.1.18.1.1.3.1.3 |
oaSfpDiagnosticVccInternaly measured supply voltage in transceiver.
Units: 100 micro Volts (V)ro Integer32 UNITS "100 micro Volts (V)" .1.3.6.1.4.1.6926.1.18.1.1.3.1.4 |
oaSfpDiagnosticTxBiasInternaly measured Tx Bias current.
Units: 1 micro Amperes (A)ro Integer32 UNITS "1 micro Amperes (A)" .1.3.6.1.4.1.6926.1.18.1.1.3.1.5 |
oaSfpDiagnosticTxPowerInternaly measured Tx output power.
Units: 0.01 decibel (dBm)ro Integer32 UNITS "0.01 decibel (dBm)" .1.3.6.1.4.1.6926.1.18.1.1.3.1.6 |
oaSfpDiagnosticRxPowerInternaly measured Rx input power.
Units: 0.01 decibel (dBm)ro Integer32 UNITS "0.01 decibel (dBm)" .1.3.6.1.4.1.6926.1.18.1.1.3.1.7 |
oaXfpMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6926.1.18.1.2 |
oaXfpCompatibleInterfaceCountThe number of ports in the system which are xfp compatiblero Integer32 .1.3.6.1.4.1.6926.1.18.1.2.1 |
oaXfpInfoTableThe XFP information table. SEQUENCE OF OaXfpInfoEntry .1.3.6.1.4.1.6926.1.18.1.2.2 |
oaXfpInfoEntryAn entry in the XFP Information Table OaXfpInfoEntry .1.3.6.1.4.1.6926.1.18.1.2.2.1 |
oaXfpInfoSlotIndexThe XFP slot number Integer32 .1.3.6.1.4.1.6926.1.18.1.2.2.1.1 |
oaXfpInfoPortIndexThe XFP port number Integer32 .1.3.6.1.4.1.6926.1.18.1.2.2.1.2 |
oaXfpInfoLaserWavelengthToleranceGuaranteed +/- range of transmitter output wavelength under all normal
operating conditions.
Units: 0.001 Nano Meter(nm)ro Integer32 UNITS "0.001 Nano Meter(nm)" .1.3.6.1.4.1.6926.1.18.1.2.2.1.28 |
oaXfpTunTableThe XFP Tunability Parameters table. SEQUENCE OF OaXfpTunEntry .1.3.6.1.4.1.6926.1.18.1.2.3 |
oaXfpTunEntryAn entry in the XFP Tunability Parameters Table OaXfpTunEntry .1.3.6.1.4.1.6926.1.18.1.2.3.1 |
oaXfpTunSlotIndexThe Tunable XFP slot number Integer32 .1.3.6.1.4.1.6926.1.18.1.2.3.1.1 |
oaXfpTunPortIndexThe Tunable XFP port number Integer32 .1.3.6.1.4.1.6926.1.18.1.2.3.1.2 |
oaXfpTunLaserFirstFrequencyFirst Frequency setting supported by the Tunable XFP port
as defined in the factory prior shipment.
Units: 0.001 Terahertz(THz)ro Integer32 UNITS "0.001 Terahertz(THz)" .1.3.6.1.4.1.6926.1.18.1.2.3.1.3 |
oaXfpTunLaserLastFrequencyLast Frequency setting supported by the Tunable XFP port
as defined in the factory prior shipment.
Units: 0.001 Terahertz(THz)ro Integer32 UNITS "0.001 Terahertz(THz)" .1.3.6.1.4.1.6926.1.18.1.2.3.1.4 |
oaXfpTunGridSpacingThe Tunable XFP port spacing. The port is compatible with.
unknown - Unknown
g200 - 200 GHz
g100 - 100 GHz
g50 - 50 GHz
g25 - 25 GHzro Enumeration .1.3.6.1.4.1.6926.1.18.1.2.3.1.5 |
oaXfpTunLaserItuBandITU Band setting supported by the Tunable XFP port.
unknown - Unknown
cBand - C Band
lBand - L Band
sBand - S Bandro Enumeration .1.3.6.1.4.1.6926.1.18.1.2.3.1.6 |
oaXfpTunLaserItuChITU Channel number of the Tunable XFP port * 1000.rw Integer32 .1.3.6.1.4.1.6926.1.18.1.2.3.1.7 |
oaDsfpMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6926.1.18.1.3 |
oaDsfpCompatibleInterfaceCountThe number of ports in the system which are DWDM sfp compatiblero Integer32 .1.3.6.1.4.1.6926.1.18.1.3.1 |
oaDsfpInfoTableThe DWDM SFP information table. SEQUENCE OF OaDsfpInfoEntry .1.3.6.1.4.1.6926.1.18.1.3.2 |
oaDsfpInfoEntryAn entry in the XFP Information Table OaDsfpInfoEntry .1.3.6.1.4.1.6926.1.18.1.3.2.1 |
oaDsfpInfoSlotIndexThe DWDM SFP slot number Integer32 .1.3.6.1.4.1.6926.1.18.1.3.2.1.1 |
oaDsfpInfoPortIndexThe DWDM SFP port number Integer32 .1.3.6.1.4.1.6926.1.18.1.3.2.1.2 |
oaDsfpInfoChannelSpacingThe densest channel spacing the modle is compatible with.
unknown - Unknown
g200 - 200 GHz
g100 - 100 GHz
g50 - 50 GHzro Enumeration .1.3.6.1.4.1.6926.1.18.1.3.2.1.4 |
oaDsfpInfoChannelTuningThe number of channel over which the module may be tuned by
user command (1 - 63).ro Integer32 .1.3.6.1.4.1.6926.1.18.1.3.2.1.5 |
oaMsa300PinMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6926.1.18.1.4 |
oaMsa300PinCompatibleIfCountThe number of ports in the system which are MSA 300 Pin compatiblero Integer32 .1.3.6.1.4.1.6926.1.18.1.4.1 |
oaMsa300PinIdTableThe Msa300Pin Identifier table. SEQUENCE OF OaMsa300PinIdEntry .1.3.6.1.4.1.6926.1.18.1.4.2 |
oaMsa300PinIdEntryAn entry in the Msa300Pin Identifier Table OaMsa300PinIdEntry .1.3.6.1.4.1.6926.1.18.1.4.2.1 |
oaMsa300PinIdSlotIndexThe MSA 300 Pin slot number Integer32 .1.3.6.1.4.1.6926.1.18.1.4.2.1.1 |
oaMsa300PinIdPortIndexThe MSA 300 Pin port number Integer32 .1.3.6.1.4.1.6926.1.18.1.4.2.1.2 |
oaMsa300PinIdModuleTypeCodePort Type code.
unknown - Unknown
msa10Gb - 10Gb MSA
msa10GbWdm - 10Gb MSA WDMro Enumeration .1.3.6.1.4.1.6926.1.18.1.4.2.1.4 |
oaMsa300PinIdFirstLaserItuBandFirst ITU Band setting supported by the port.
unknown - Unknown
cBand - C Band
lBand - L Band
sBand - S Bandro Enumeration .1.3.6.1.4.1.6926.1.18.1.4.2.1.6 |
oaMsa300PinIdFirstLaserItuChFirst ITU Channel setting supported by the port
(i.e. maximum wavelength) as defined in the factory prior shipment.
Units: 0.01 Nano Meter(nm)ro Integer32 UNITS "0.01 Nano Meter(nm)" .1.3.6.1.4.1.6926.1.18.1.4.2.1.7 |
oaMsa300PinIdLastLaserItuBandLast ITU Band setting supported by the port.
unknown - Unknown
cBand - C Band
lBand - L Band
sBand - S Bandro Enumeration .1.3.6.1.4.1.6926.1.18.1.4.2.1.8 |
oaMsa300PinIdLastLaserItuChLast ITU Channel setting supported by the port
(i.e. maximum wavelength) as defined in the factory prior shipment.
Units: 0.01 Nano Meter(nm)ro Integer32 UNITS "0.01 Nano Meter(nm)" .1.3.6.1.4.1.6926.1.18.1.4.2.1.9 |
oaMsa300PinIdLaserItuChSpacingThe MSA 300 Pin port spacing the port is compatible with.
unknown - Unknown
g200 - 200 GHz
g100 - 100 GHz
g50 - 50 GHz
g25 - 25 GHzro Enumeration .1.3.6.1.4.1.6926.1.18.1.4.2.1.10 |
oaMsa300PinIdModuleDistanceTypeMSA Module Distance Type.
unknown - Unknown
msa40Km(2) - 40 km distance,
msa80Km(3) - 80 km distance,
msa120Km(4) - 120 km distance,
msa160Km(5) - 160 km distance,
msa200Km(6) - 200 km distance,
msa340Km(7) - 340 km distance.ro Enumeration .1.3.6.1.4.1.6926.1.18.1.4.2.1.11 |
oaMsa300PinIdMinDispDistMinimum Dispersion distance of integrated TODC.
(0) is returned when this feature is not supported
Units: ps/nmro Integer32 UNITS "ps/nm" .1.3.6.1.4.1.6926.1.18.1.4.2.1.12 |
oaMsa300PinIdMaxDispDistMaximum Dispersion distance of integrated TODC.
(0) is returned when this feature is not supported
Units: ps/nmro Integer32 UNITS "ps/nm" .1.3.6.1.4.1.6926.1.18.1.4.2.1.13 |
oaMsa300PinMeasTableThe MSA 300 Pin Measurement table. SEQUENCE OF OaMsa300PinMeasEntry .1.3.6.1.4.1.6926.1.18.1.4.3 |
oaMsa300PinMeasEntryAn entry in the MSA 300 Pin Measurement Table OaMsa300PinMeasEntry .1.3.6.1.4.1.6926.1.18.1.4.3.1 |
oaMsa300PinMeasSlotIndexThe MSA 300 Pin slot number Integer32 .1.3.6.1.4.1.6926.1.18.1.4.3.1.1 |
oaMsa300PinMeasPortIndexThe MSA 300 Pin port number Integer32 .1.3.6.1.4.1.6926.1.18.1.4.3.1.2 |
oaMsa300PinMeasLaserOutputPwrMonLaser output power.
Units: 0.01 decibel (dBm)ro Integer32 UNITS "0.01 decibel (dBm)" .1.3.6.1.4.1.6926.1.18.1.4.3.1.4 |
oaMsa300PinMeasLaserTempMonLaser temperature.
Units: 0.001 degrees Celsius (C)ro Integer32 UNITS "0.001 degrees Celsius (C)" .1.3.6.1.4.1.6926.1.18.1.4.3.1.5 |
oaMsa300PinMeasRecSigAvrOptPowerAverage received optical power.
Units: 0.01 decibel (dBm)ro Integer32 UNITS "0.01 decibel (dBm)" .1.3.6.1.4.1.6926.1.18.1.4.3.1.7 |
oaMsa300PinMeasLaserWlengthMonThe offset of the exact ITU channel wavelength.
Units: Mega Hertz (MHz)ro Integer32 UNITS "Mega Hertz (MHz)" .1.3.6.1.4.1.6926.1.18.1.4.3.1.8 |
oaMsa300PinMeasTransTempMonTransponder Temperature.
Units: 0.001 degrees Celsius (C)ro Integer32 UNITS "0.001 degrees Celsius (C)" .1.3.6.1.4.1.6926.1.18.1.4.3.1.9 |
oaMsa300PinAlarmTableThe MSA 300 Pin Alarm table. SEQUENCE OF OaMsa300PinAlarmEntry .1.3.6.1.4.1.6926.1.18.1.4.4 |
oaMsa300PinAlarmEntryAn entry in the MSA 300 Pin Alarm Table OaMsa300PinAlarmEntry .1.3.6.1.4.1.6926.1.18.1.4.4.1 |
oaMsa300PinAlarmSlotIndexThe MSA 300 Pin slot numberro Integer32 .1.3.6.1.4.1.6926.1.18.1.4.4.1.1 |
oaMsa300PinAlarmPortIndexThe MSA 300 Pin port numberro Integer32 .1.3.6.1.4.1.6926.1.18.1.4.4.1.2 |
oaMsa300PinAlarmTxAlarmTransmit Alarms.
Alarm bits in this object remain in the alarmed state until a read
of this register occurs.
This object is organised as a bit map. Each bit represents an alarm.
If the object is zero - no alarm is active.
0x000000 ('0000 0000 0000 0000 0000 0000'B) - Normal (No alarm)
0x000001 ('0000 0000 0000 0000 0000 0001'B) - TxALM INT
- Tx Summary alarm
0x000002 ('0000 0000 0000 0000 0000 0010'B) - Tunable DCM Not Ready alarm
0x000004 ('0000 0000 0000 0000 0000 0100'B) - LsTEMPALM
- Laser temperature alarm
0x000008 ('0000 0000 0000 0000 0000 1000'B) - TxLOCKERR
- Loss of TxPLL lock indicator
0x000020 ('0000 0000 0000 0000 0010 0000'B) - LsPOWALM
- Laser power alarm
0x000200 ('0000 0000 0000 0010 0000 0000'B) - ModTEMPALM
- Modulator temperature alarm
0x002000 ('0000 0000 0010 0000 0000 0000'B) - LsWAVALM
- Laser Wavelength alarm
Any combination of the bits represent the combination of the alarmsro OCTET STRING .1.3.6.1.4.1.6926.1.18.1.4.4.1.3 |
oaMsa300PinAlarmRxAlarmReceive Alarms.
Alarm bits in this object remain in the alarmed state until a read
of this register occurs.
This object is organised as a bit map. Each bit represents an alarm.
If the object is zero - no alarm is active.
0x0000 ('0000 0000 0000 0000'B) - Normal (No alarm)
0x0001 ('0000 0000 0000 0001'B) - RxALM INT - Rx Summary alarm
0x0002 ('0000 0000 0000 0010'B) - RxPOWALM
- Loss average optical power alarm
Any combination of the bits represent the combination of the alarmsro OCTET STRING .1.3.6.1.4.1.6926.1.18.1.4.4.1.4 |
oaMsa300PinAlarmPsAlarmReceive Alarms.
Alarm bits in this object remain in the alarmed state until a read
of this register occurs.
This object is organised as a bit map. Each bit represents an alarm.
If the object is zero - no alarm is active.
0x00 ('0000 0000'B) - Normal (No alarm)
0x01 ('0000 0001'B) - PSUMMARY (poerw summary)
0x02 ('0000 0010'B) - P5VANALOG (+5V analog)
0x04 ('0000 0100'B) - N5P2VANALOG (-5.2V analog)
0x08 ('0000 1000'B) - P3P3VANALOG (_3.3V analog)
0x10 ('0001 0000'B) - P3P3VDIGITAL (+3.3V digital)
0x20 ('0010 0000'B) - LVDIGITAL (+1.8V digital)
0x40 ('0100 0000'B) - N5P2VDIGITAL (-5.2V digital)
Any combination of the bits represent the combination of the alarmsro OCTET STRING .1.3.6.1.4.1.6926.1.18.1.4.4.1.5 |
oaMsa300PinComTableThe MSA 300 Pin Command table. SEQUENCE OF OaMsa300PinComEntry .1.3.6.1.4.1.6926.1.18.1.4.5 |
oaMsa300PinComEntryAn entry in the MSA 300 Pin Command Table OaMsa300PinComEntry .1.3.6.1.4.1.6926.1.18.1.4.5.1 |
oaMsa300PinComSlotIndexThe MSA 300 Pin slot number Integer32 .1.3.6.1.4.1.6926.1.18.1.4.5.1.1 |
oaMsa300PinComPortIndexThe MSA 300 Pin port number Integer32 .1.3.6.1.4.1.6926.1.18.1.4.5.1.2 |
oaMsa300PinComLaserItuBandITU Band of the port.
unknown - Unknown
cBand - C Band
lBand - L Band
sBand - S Bandrw Enumeration .1.3.6.1.4.1.6926.1.18.1.4.5.1.7 |
oaMsa300PinComLaserItuChITU Channel wavelength of the port
Units: 0.01 Nano Meter(nm)rw Integer32 UNITS "0.01 Nano Meter(nm)" .1.3.6.1.4.1.6926.1.18.1.4.5.1.8 |
oaMsa300PinComDispDistDispersion distance of integrated TODC.
Units: ps/nmrw Integer32 UNITS "ps/nm" .1.3.6.1.4.1.6926.1.18.1.4.5.1.9 |
oaMsa300PinComPolarityInversionPolarity Inversion feature of the port.
Supported for TM-DXFPT modules only, if
this feature is defined for module.rw Enumeration .1.3.6.1.4.1.6926.1.18.1.4.5.1.10 |
oaSfpConformance OBJECT IDENTIFIER .1.3.6.1.4.1.6926.1.18.2 |
oaSfpGroups OBJECT IDENTIFIER .1.3.6.1.4.1.6926.1.18.2.1 |
oaSfpCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.6926.1.18.2.2 |