Nortel-MsCarrier-MscPassport-ModAtmQosMIB
AI MIB Summary
Standard SNMP MIB module defining data structures for Nortel-MsCarrier-MscPassport-ModAtmQosMIB.
34
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
34 total| Object Name |
|---|
mscModFrsAtmNet OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.16.3.2 |
mscModFrsAtmNetRowStatusTableThis entry controls the addition and deletion of
mscModFrsAtmNet components. SEQUENCE OF MscModFrsAtmNetRowStatusEntry .1.3.6.1.4.1.562.36.2.1.16.3.2.1 |
mscModFrsAtmNetRowStatusEntryA single entry in the table represents a single
mscModFrsAtmNet component. MscModFrsAtmNetRowStatusEntry .1.3.6.1.4.1.562.36.2.1.16.3.2.1.1 |
mscModFrsAtmNetRowStatusThis variable is used as the basis for SNMP naming of
mscModFrsAtmNet components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.16.3.2.1.1.1 |
mscModFrsAtmNetComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.16.3.2.1.1.2 |
mscModFrsAtmNetStorageTypeThis variable represents the storage type value for the
mscModFrsAtmNet tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.16.3.2.1.1.4 |
mscModFrsAtmNetIndexThis variable represents the index for the mscModFrsAtmNet tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.16.3.2.1.1.10 |
mscModFrsAtmNetTpm OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.16.3.2.2 |
mscModFrsAtmNetTpmRowStatusTableThis entry controls the addition and deletion of
mscModFrsAtmNetTpm components. SEQUENCE OF MscModFrsAtmNetTpmRowStatusEntry .1.3.6.1.4.1.562.36.2.1.16.3.2.2.1 |
mscModFrsAtmNetTpmRowStatusEntryA single entry in the table represents a single
mscModFrsAtmNetTpm component. MscModFrsAtmNetTpmRowStatusEntry .1.3.6.1.4.1.562.36.2.1.16.3.2.2.1.1 |
mscModFrsAtmNetTpmRowStatusThis variable is used as the basis for SNMP naming of
mscModFrsAtmNetTpm components.
These components can be added.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.16.3.2.2.1.1.1 |
mscModFrsAtmNetTpmComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.16.3.2.2.1.1.2 |
mscModFrsAtmNetTpmStorageTypeThis variable represents the storage type value for the
mscModFrsAtmNetTpm tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.16.3.2.2.1.1.4 |
mscModFrsAtmNetTpmIndexThis variable represents the index for the mscModFrsAtmNetTpm tables. Integer32 .1.3.6.1.4.1.562.36.2.1.16.3.2.2.1.1.10 |
mscModFrsAtmNetTpmProvTableThis group specifies the mapping from Frame Relay parameters to
ATM parameters for a Frame Relay using the defined transfer
priority. SEQUENCE OF MscModFrsAtmNetTpmProvEntry .1.3.6.1.4.1.562.36.2.1.16.3.2.2.2 |
mscModFrsAtmNetTpmProvEntryAn entry in the mscModFrsAtmNetTpmProvTable. MscModFrsAtmNetTpmProvEntry .1.3.6.1.4.1.562.36.2.1.16.3.2.2.2.1 |
mscModFrsAtmNetTpmEmissionPriorityThis attribute specifies the egress emission priority at the FR to
ATM interface. A value of 3 specifies the highest priority, whereas a
value of 0 specifies the lowest priority.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.16.3.2.2.2.1.1 |
mscModFrsAtmNetTpmAtmServiceCategoryThis attribute specifies the ATM class of service value to be used on
a transport connection.rw Enumeration .1.3.6.1.4.1.562.36.2.1.16.3.2.2.2.1.2 |
mscModFrsAtmNetTpmAvgFrameSizeThis attribute specifies the average frame size that is used in the
traffic parameter conversion policy calculations for this transfer
priority to determine the overhead factor for FR to ATM
interworking. The overhead factor affects the granularity of the
bandwidth requirements. The values should be identical across the
network. Otherwise, there may result in bandwidth conversion
inconsistencies.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.16.3.2.2.2.1.3 |
mscModFrsAtmNetTpmTrafficParmConversionPolicyThis attribute specifies the traffic parameter conversion policy to use
for this transfer priority to specify the equivalent bandwidth rate at
the FrAtm interface.
Policy 3 characterizes the traffic in the following way:
- ATM traffic descriptor type 6 is selected
- PCR0+1 is based on the AR
- SCR0+1 is based on the CIR and EIR
- MBS0+1 is based on Bc,Be,CIR,EIR and AR
- Takes into account that the instananeous rate of the frame relay
stream can burst above CIR and up tp the AR.
Policy 4 characterizes the traffic in the following way:
- ATM traffic descriptor type 7 or 8 is selected. Type 7 is chosen
when non-conforming cells are to be discarded and type 8 when
non-conforming cells are tagged by UPC traffic policer.
- PCR0+1 is based on the AR
- SCR0 is based on the CIR
- MBS0 is based on Bc,CIR and AR
- There is no direct characterization of EIR. The allowed EIR can be
derived using the difference between the AR and CIR.
Policy 5 characterizes the traffic in the following way:
- ATM traffic descriptor type 7 or 8 is selected . Type 7 is chosen
when non-conforming cells are to be discarded and type 8 when
non-conforming cells are tagged by UPC traffic policer
- PCR0+1 is based on CIR and EIR
- SCR0 is based on the CIR
- MBS0 is based on the Bc,CIR and AR
- The maximum PCR is no longer based on AR but based on the
CIR and EIR.
Policy 6 characterizes the traffic in the following way:
- ATM traffic descriptor type 3 is selected
- PCR0+1 is based only on CIR.rw Enumeration .1.3.6.1.4.1.562.36.2.1.16.3.2.2.2.1.4 |
mscModFrsAtmNetTpmAssignedBandwidthPoolThis attribute specifies the bandwidth pool which is used to support
this transfer priority. The bandwidth pool is defined in the frAtm Ca
component.rw Enumeration .1.3.6.1.4.1.562.36.2.1.16.3.2.2.2.1.5 |
mscModFrsAtmNetProvTableThis group contains information related to the Frame Relay to ATM
interworking. SEQUENCE OF MscModFrsAtmNetProvEntry .1.3.6.1.4.1.562.36.2.1.16.3.2.10 |
mscModFrsAtmNetProvEntryAn entry in the mscModFrsAtmNetProvTable. MscModFrsAtmNetProvEntry .1.3.6.1.4.1.562.36.2.1.16.3.2.10.1 |
mscModFrsAtmNetRetryTimerPeriodThis attribute specifies the module wide retry timer interval for
failed SPVC calls using Frame Relay to ATM Networking. Changes
to this attribute will take effect on subsequent call setups.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.16.3.2.10.1.1 |
modAtmQosMIB OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.75 |
IMPORTS Unknown .1.3.6.1.4.1.562.36.2.2.75 |
modAtmQosGroup OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.75.1 |
modAtmQosGroupCA OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.75.1.1 |
modAtmQosGroupCA02 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.75.1.1.3 |
modAtmQosGroupCA02A OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.75.1.1.3.2 |
modAtmQosCapabilities OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.75.3 |
modAtmQosCapabilitiesCA OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.75.3.1 |
modAtmQosCapabilitiesCA02 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.75.3.1.3 |
modAtmQosCapabilitiesCA02A OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.75.3.1.3.2 |