Nortel-MsCarrier-MscPassport-BaseShelfMIB
AI MIB Summary
Standard SNMP MIB module defining data structures for Nortel-MsCarrier-MscPassport-BaseShelfMIB.
225
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
225 total| Object Name |
|---|
mscShelf OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.13 |
mscShelfRowStatusTableThis entry controls the addition and deletion of
mscShelf components. SEQUENCE OF MscShelfRowStatusEntry .1.3.6.1.4.1.562.36.2.1.13.1 |
mscShelfRowStatusEntryA single entry in the table represents a single
mscShelf component. MscShelfRowStatusEntry .1.3.6.1.4.1.562.36.2.1.13.1.1 |
mscShelfRowStatusThis variable is used as the basis for SNMP naming of
mscShelf components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.13.1.1.1 |
mscShelfComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.13.1.1.2 |
mscShelfStorageTypeThis variable represents the storage type value for the
mscShelf tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.13.1.1.4 |
mscShelfIndexThis variable represents the index for the mscShelf tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.13.1.1.10 |
mscShelfCard OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.13.2 |
mscShelfCardRowStatusTableThis entry controls the addition and deletion of
mscShelfCard components. SEQUENCE OF MscShelfCardRowStatusEntry .1.3.6.1.4.1.562.36.2.1.13.2.1 |
mscShelfCardRowStatusEntryA single entry in the table represents a single
mscShelfCard component. MscShelfCardRowStatusEntry .1.3.6.1.4.1.562.36.2.1.13.2.1.1 |
mscShelfCardRowStatusThis variable is used as the basis for SNMP naming of
mscShelfCard components.
These components can be added.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.13.2.1.1.1 |
mscShelfCardComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.13.2.1.1.2 |
mscShelfCardStorageTypeThis variable represents the storage type value for the
mscShelfCard tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.13.2.1.1.4 |
mscShelfCardIndexThis variable represents the index for the mscShelfCard tables. Integer32 .1.3.6.1.4.1.562.36.2.1.13.2.1.1.10 |
mscShelfCardTest OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.13.2.3 |
mscShelfCardTestRowStatusTableThis entry controls the addition and deletion of
mscShelfCardTest components. SEQUENCE OF MscShelfCardTestRowStatusEntry .1.3.6.1.4.1.562.36.2.1.13.2.3.1 |
mscShelfCardTestRowStatusEntryA single entry in the table represents a single
mscShelfCardTest component. MscShelfCardTestRowStatusEntry .1.3.6.1.4.1.562.36.2.1.13.2.3.1.1 |
mscShelfCardTestRowStatusThis variable is used as the basis for SNMP naming of
mscShelfCardTest components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.13.2.3.1.1.1 |
mscShelfCardTestComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.13.2.3.1.1.2 |
mscShelfCardTestStorageTypeThis variable represents the storage type value for the
mscShelfCardTest tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.13.2.3.1.1.4 |
mscShelfCardTestIndexThis variable represents the index for the mscShelfCardTest tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.13.2.3.1.1.10 |
mscShelfCardTestStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF MscShelfCardTestStateEntry .1.3.6.1.4.1.562.36.2.1.13.2.3.10 |
mscShelfCardTestStateEntryAn entry in the mscShelfCardTestStateTable. MscShelfCardTestStateEntry .1.3.6.1.4.1.562.36.2.1.13.2.3.10.1 |
mscShelfCardTestAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.13.2.3.10.1.1 |
mscShelfCardTestOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.562.36.2.1.13.2.3.10.1.2 |
mscShelfCardTestUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.562.36.2.1.13.2.3.10.1.3 |
mscShelfCardTestSetupTableThis attribute group contains the attributes that govern the operation
of a card test. These attributes cannot be changed while a card test
is running. SEQUENCE OF MscShelfCardTestSetupEntry .1.3.6.1.4.1.562.36.2.1.13.2.3.11 |
mscShelfCardTestSetupEntryAn entry in the mscShelfCardTestSetupTable. MscShelfCardTestSetupEntry .1.3.6.1.4.1.562.36.2.1.13.2.3.11.1 |
mscShelfCardTestTargetCardThis attribute specifies the slot number of the card to which frames
are sent during the card test. There is no single default value for this
attributeit defaults to the slot number of the Test component's
own card and must be changed to a different value before the test
can be started.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.13.2.3.11.1.1 |
mscShelfCardTestFrmTypesThis attribute specifies the types of frames that are sent during the
card test. It must contain at least one of the following values.
loading: A set of 'loading frames' is circulated between the Test
component and the Test component on the target card as rapidly as
possible. This frame type should be selected when the test is
intended to verify the operation of the cards and the backplane
buses under a specified load.
verification: A single 'verification frame' is transmitted to the Test
component on the target card; when the frame is returned, its
contents are verified and the next verification frame in the series is
transmitted. This frame type should be selected when the test is
intended to verify that frames are not being corrupted as they pass
from card to card.
Description of bits:
loading(0)
verification(1)rw OCTET STRING .1.3.6.1.4.1.562.36.2.1.13.2.3.11.1.2 |
mscShelfCardTestFrmPrioritiesThis attribute specifies the priorities of the frames that are sent
during the card test. It must contain at least one of the following
values.
lowPriority: Low priority frames are sent.
highPriority: High priority frames are sent.
Description of bits:
lowPriority(0)
highPriority(1)rw OCTET STRING .1.3.6.1.4.1.562.36.2.1.13.2.3.11.1.3 |
mscShelfCardTestFrmPatternTypeThis attribute specifies the bit sequence to fill the frames used in the
card test. It must contain one of the following values.
ccitt32kBitPattern: a pseudo-random sequence of 32 Kbit is used
ccitt8MBitPattern: a pseudo-random sequence of 8 Mbit is used
customizedPattern: the pattern defined by the customizedPattern
attribute is usedrw Enumeration .1.3.6.1.4.1.562.36.2.1.13.2.3.11.1.4 |
mscShelfCardTestCustomizedPatternThis attribute specifies a 32 bit sequence used to fill frames when
the framePatternType attribute has a value of customizedPattern.
The default value gives a pattern of alternating 0 and 1 bits.rw Hex .1.3.6.1.4.1.562.36.2.1.13.2.3.11.1.5 |
mscShelfCardTestDurationThis attribute specifies the maximum length of time that the card
test is allowed to run. The value is expressed in minutes. The
maximum allowed value permits the card test to be run for up to 30
days.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.13.2.3.11.1.6 |
mscShelfCardTestResultsTableThis attribute group contains the results of the card test that is
currently running; if no test is running, the attribute group contains
the results of the most recently completed card test. The attributes
of the Results group are reset to their inital values whenever a card
test is started or any attribute of the Setup group is set. SEQUENCE OF MscShelfCardTestResultsEntry .1.3.6.1.4.1.562.36.2.1.13.2.3.12 |
mscShelfCardTestResultsEntryAn entry in the mscShelfCardTestResultsTable. MscShelfCardTestResultsEntry .1.3.6.1.4.1.562.36.2.1.13.2.3.12.1 |
mscShelfCardTestElapsedTimeThis attribute records the length of time that the card test has been
running.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.13.2.3.12.1.1 |
mscShelfCardTestTimeRemainingThis attribute records the maximum length of time that the card test
will continue to run before stopping.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.13.2.3.12.1.2 |
mscShelfCardTestCauseOfTerminationThis attribute records the reason the card test ended. It contains one
of the following values:
neverStarted: the card test has not been started.
testRunning: the card test is currently running.
testTimeExpired: the card test ran for the specified duration.
stoppedByOperator: a Stop command was issued.
targetFailed: the target card became non-operational.
becameActive: the source card became the active card for some LP.ro Enumeration .1.3.6.1.4.1.562.36.2.1.13.2.3.12.1.3 |
mscShelfCardTestSizeTableThis attribute specifies for each priority level the number of data
bytes in each frame sent during the card test. (The value specified
does not include the 4-byte header that is automatically added to a
frame when it is transmitted over the backplane.) SEQUENCE OF MscShelfCardTestSizeEntry .1.3.6.1.4.1.562.36.2.1.13.2.3.253 |
mscShelfCardTestSizeEntryAn entry in the mscShelfCardTestSizeTable. MscShelfCardTestSizeEntry .1.3.6.1.4.1.562.36.2.1.13.2.3.253.1 |
mscShelfCardTestSizeIndexThis variable represents the mscShelfCardTestSizeTable
specific index for the mscShelfCardTestSizeTable. Enumeration .1.3.6.1.4.1.562.36.2.1.13.2.3.253.1.1 |
mscShelfCardTestSizeValueThis variable represents an individual value for the
mscShelfCardTestSizeTable.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.13.2.3.253.1.2 |
mscShelfCardTestLoadingFrmDataTableThis attribute records information about the loading frames that
have been transmitted to the Test component on the target card. The
following data is shown for each priority level:
the number of frames that have been transmitted,
the number of frames that were not returned successfully.
The attribute's value wraps to zero when they exceed the maximum
permitted value.
Note: A loading frame is considered to have been successfully
returned even if it contains bit errors. Frame error statistics are
recorded in the verificationFrmData attribute. SEQUENCE OF MscShelfCardTestLoadingFrmDataEntry .1.3.6.1.4.1.562.36.2.1.13.2.3.254 |
mscShelfCardTestLoadingFrmDataEntryAn entry in the mscShelfCardTestLoadingFrmDataTable. MscShelfCardTestLoadingFrmDataEntry .1.3.6.1.4.1.562.36.2.1.13.2.3.254.1 |
mscShelfCardTestLoadingFrmDataResultsIndexThis variable represents the next to last index for the
mscShelfCardTestLoadingFrmDataTable. Enumeration .1.3.6.1.4.1.562.36.2.1.13.2.3.254.1.1 |
mscShelfCardTestLoadingFrmDataPriorityIndexThis variable represents the final index for the
mscShelfCardTestLoadingFrmDataTable. Enumeration .1.3.6.1.4.1.562.36.2.1.13.2.3.254.1.2 |
mscShelfCardTestLoadingFrmDataValueThis variable represents an individual value for the
mscShelfCardTestLoadingFrmDataTable.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.13.2.3.254.1.3 |
mscShelfCardTestVerificationFrmDataTableThis attribute records information about the verification frames that
have been transmitted to the Test component on the target card. The
following data is shown for each priority level:
the number of frames that have been tested,
the number of frames that had incorrect bits when returned.
The attribute's values wrap around to zero when they exceed the
maximum permitted value.
Note: Verification frames that are not returned at all, or are returned
too late, are considered 'lost' and are not counted in either of the
above values. Frame loss statistics are recorded in the
loadingFrmData attribute. SEQUENCE OF MscShelfCardTestVerificationFrmDataEntry .1.3.6.1.4.1.562.36.2.1.13.2.3.255 |
mscShelfCardTestVerificationFrmDataEntryAn entry in the mscShelfCardTestVerificationFrmDataTable. MscShelfCardTestVerificationFrmDataEntry .1.3.6.1.4.1.562.36.2.1.13.2.3.255.1 |
mscShelfCardTestVerificationFrmDataResultsIndexThis variable represents the next to last index for the
mscShelfCardTestVerificationFrmDataTable. Enumeration .1.3.6.1.4.1.562.36.2.1.13.2.3.255.1.1 |
mscShelfCardTestVerificationFrmDataPriorityIndexThis variable represents the final index for the
mscShelfCardTestVerificationFrmDataTable. Enumeration .1.3.6.1.4.1.562.36.2.1.13.2.3.255.1.2 |
mscShelfCardTestVerificationFrmDataValueThis variable represents an individual value for the
mscShelfCardTestVerificationFrmDataTable.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.13.2.3.255.1.3 |
mscShelfCardDiag OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.13.2.4 |
mscShelfCardDiagRowStatusTableThis entry controls the addition and deletion of
mscShelfCardDiag components. SEQUENCE OF MscShelfCardDiagRowStatusEntry .1.3.6.1.4.1.562.36.2.1.13.2.4.1 |
mscShelfCardDiagRowStatusEntryA single entry in the table represents a single
mscShelfCardDiag component. MscShelfCardDiagRowStatusEntry .1.3.6.1.4.1.562.36.2.1.13.2.4.1.1 |
mscShelfCardDiagRowStatusThis variable is used as the basis for SNMP naming of
mscShelfCardDiag components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.13.2.4.1.1.1 |
mscShelfCardDiagComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.13.2.4.1.1.2 |
mscShelfCardDiagStorageTypeThis variable represents the storage type value for the
mscShelfCardDiag tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.13.2.4.1.1.4 |
mscShelfCardDiagIndexThis variable represents the index for the mscShelfCardDiag tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.13.2.4.1.1.10 |
mscShelfCardDiagTrapData OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.13.2.4.2 |
mscShelfCardDiagTrapDataRowStatusTableThis entry controls the addition and deletion of
mscShelfCardDiagTrapData components. SEQUENCE OF MscShelfCardDiagTrapDataRowStatusEntry .1.3.6.1.4.1.562.36.2.1.13.2.4.2.1 |
mscShelfCardDiagTrapDataRowStatusEntryA single entry in the table represents a single
mscShelfCardDiagTrapData component. MscShelfCardDiagTrapDataRowStatusEntry .1.3.6.1.4.1.562.36.2.1.13.2.4.2.1.1 |
mscShelfCardDiagTrapDataRowStatusThis variable is used as the basis for SNMP naming of
mscShelfCardDiagTrapData components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.13.2.4.2.1.1.1 |
mscShelfCardDiagTrapDataComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.13.2.4.2.1.1.2 |
mscShelfCardDiagTrapDataStorageTypeThis variable represents the storage type value for the
mscShelfCardDiagTrapData tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.13.2.4.2.1.1.4 |
mscShelfCardDiagTrapDataIndexThis variable represents the index for the mscShelfCardDiagTrapData tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.13.2.4.2.1.1.10 |
mscShelfCardDiagTrapDataLine OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.13.2.4.2.2 |
mscShelfCardDiagTrapDataLineRowStatusTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
mscShelfCardDiagTrapDataLine components. SEQUENCE OF MscShelfCardDiagTrapDataLineRowStatusEntry .1.3.6.1.4.1.562.36.2.1.13.2.4.2.2.1 |
mscShelfCardDiagTrapDataLineRowStatusEntryA single entry in the table represents a single
mscShelfCardDiagTrapDataLine component. MscShelfCardDiagTrapDataLineRowStatusEntry .1.3.6.1.4.1.562.36.2.1.13.2.4.2.2.1.1 |
mscShelfCardDiagTrapDataLineRowStatusThis variable is used as the basis for SNMP naming of
mscShelfCardDiagTrapDataLine components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.13.2.4.2.2.1.1.1 |
mscShelfCardDiagTrapDataLineComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.13.2.4.2.2.1.1.2 |
mscShelfCardDiagTrapDataLineStorageTypeThis variable represents the storage type value for the
mscShelfCardDiagTrapDataLine tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.13.2.4.2.2.1.1.4 |
mscShelfCardDiagTrapDataLineIndexThis variable represents the index for the mscShelfCardDiagTrapDataLine tables. Integer32 .1.3.6.1.4.1.562.36.2.1.13.2.4.2.2.1.1.10 |
mscShelfCardDiagTrapDataLineOperTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This attribute group contains operational attributes for one line of
trap data or recoverable error report. SEQUENCE OF MscShelfCardDiagTrapDataLineOperEntry .1.3.6.1.4.1.562.36.2.1.13.2.4.2.2.10 |
mscShelfCardDiagTrapDataLineOperEntryAn entry in the mscShelfCardDiagTrapDataLineOperTable. MscShelfCardDiagTrapDataLineOperEntry .1.3.6.1.4.1.562.36.2.1.13.2.4.2.2.10.1 |
mscShelfCardDiagTrapDataLineDataThis attribute contains one line of trap data or recoverable error
report.ro ExtendedAsciiString .1.3.6.1.4.1.562.36.2.1.13.2.4.2.2.10.1.1 |
mscShelfCardDiagRecErr OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.13.2.4.3 |
mscShelfCardDiagRecErrRowStatusTableThis entry controls the addition and deletion of
mscShelfCardDiagRecErr components. SEQUENCE OF MscShelfCardDiagRecErrRowStatusEntry .1.3.6.1.4.1.562.36.2.1.13.2.4.3.1 |
mscShelfCardDiagRecErrRowStatusEntryA single entry in the table represents a single
mscShelfCardDiagRecErr component. MscShelfCardDiagRecErrRowStatusEntry .1.3.6.1.4.1.562.36.2.1.13.2.4.3.1.1 |
mscShelfCardDiagRecErrRowStatusThis variable is used as the basis for SNMP naming of
mscShelfCardDiagRecErr components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.13.2.4.3.1.1.1 |
mscShelfCardDiagRecErrComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.13.2.4.3.1.1.2 |
mscShelfCardDiagRecErrStorageTypeThis variable represents the storage type value for the
mscShelfCardDiagRecErr tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.13.2.4.3.1.1.4 |
mscShelfCardDiagRecErrIndexThis variable represents the index for the mscShelfCardDiagRecErr tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.13.2.4.3.1.1.10 |
mscShelfCardDiagRecErrLine OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.13.2.4.3.2 |
mscShelfCardDiagRecErrLineRowStatusTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
mscShelfCardDiagRecErrLine components. SEQUENCE OF MscShelfCardDiagRecErrLineRowStatusEntry .1.3.6.1.4.1.562.36.2.1.13.2.4.3.2.1 |
mscShelfCardDiagRecErrLineRowStatusEntryA single entry in the table represents a single
mscShelfCardDiagRecErrLine component. MscShelfCardDiagRecErrLineRowStatusEntry .1.3.6.1.4.1.562.36.2.1.13.2.4.3.2.1.1 |
mscShelfCardDiagRecErrLineRowStatusThis variable is used as the basis for SNMP naming of
mscShelfCardDiagRecErrLine components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.13.2.4.3.2.1.1.1 |
mscShelfCardDiagRecErrLineComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.13.2.4.3.2.1.1.2 |
mscShelfCardDiagRecErrLineStorageTypeThis variable represents the storage type value for the
mscShelfCardDiagRecErrLine tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.13.2.4.3.2.1.1.4 |
mscShelfCardDiagRecErrLineIndexThis variable represents the index for the mscShelfCardDiagRecErrLine tables. Integer32 .1.3.6.1.4.1.562.36.2.1.13.2.4.3.2.1.1.10 |
mscShelfCardDiagRecErrLineOperTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This attribute group contains operational attributes for one line of
trap data or recoverable error report. SEQUENCE OF MscShelfCardDiagRecErrLineOperEntry .1.3.6.1.4.1.562.36.2.1.13.2.4.3.2.10 |
mscShelfCardDiagRecErrLineOperEntryAn entry in the mscShelfCardDiagRecErrLineOperTable. MscShelfCardDiagRecErrLineOperEntry .1.3.6.1.4.1.562.36.2.1.13.2.4.3.2.10.1 |
mscShelfCardDiagRecErrLineDataThis attribute contains one line of trap data or recoverable error
report.ro ExtendedAsciiString .1.3.6.1.4.1.562.36.2.1.13.2.4.3.2.10.1.1 |
mscShelfCardProvTableThis group contains the provisionable attributes for the Card
component. SEQUENCE OF MscShelfCardProvEntry .1.3.6.1.4.1.562.36.2.1.13.2.10 |
mscShelfCardProvEntryAn entry in the mscShelfCardProvTable. MscShelfCardProvEntry .1.3.6.1.4.1.562.36.2.1.13.2.10.1 |
mscShelfCardCardTypeThis is the type of card expected in this slot. Specifying a card type
here has the effect of configuring a card to run in this slot. A value
of none means that no card is configured to run in this slot.rw Enumeration .1.3.6.1.4.1.562.36.2.1.13.2.10.1.1 |
mscShelfCardSparingConnectionThis attribute contains the identification of the 1 for N sparing panel
group of connectors to which the card is connected. This
identification should coincide with the label located on the sparing
panel.rw Enumeration .1.3.6.1.4.1.562.36.2.1.13.2.10.1.2 |
mscShelfCardCommentTextThis is an arbitrary string that can be used to specify the location of
the sparing panel.rw AsciiString .1.3.6.1.4.1.562.36.2.1.13.2.10.1.4 |
mscShelfCardStateTableThis group contains the three OSI State attributes and the six OSI
Status attributes. The descriptions generically indicate what each
attribute implies about the component. Note that not all the values
and state combinations described here are supported by every
component which uses this group. For component-specific
information and the valid state combinations, refer to NTP 241-
7001-150, Passport Operations and Maintenance Guide. SEQUENCE OF MscShelfCardStateEntry .1.3.6.1.4.1.562.36.2.1.13.2.11 |
mscShelfCardStateEntryAn entry in the mscShelfCardStateTable. MscShelfCardStateEntry .1.3.6.1.4.1.562.36.2.1.13.2.11.1 |
mscShelfCardAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.13.2.11.1.1 |
mscShelfCardOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.13.2.11.1.2 |
mscShelfCardUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.13.2.11.1.3 |
mscShelfCardAvailabilityStatusIf supported by the component, this attribute indicates the OSI
Availability status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value inTest indicates that the resource is undergoing a test
procedure. If adminState is locked or shuttingDown, the normal
users are precluded from using the resource and controlStatus is
reservedForTest. Tests that do not exclude additional users can be
present in any operational or administrative state but the
reservedForTest condition should not be present.
The value failed indicates that the component has an internal fault
that prevents it from operating. The operationalState is disabled.
The value dependency indicates that the component cannot operate
because some other resource on which it depends is unavailable.
The operationalState is disabled.
The value powerOff indicates the resource requires power to be
applied and it is not powered on. The operationalState is disabled.
The value offLine indicates the resource requires a routine
operation (either manual, automatic, or both) to be performed to
place it on-line and make it available for use. The operationalState
is disabled.
The value offDuty indicates the resource is inactive in accordance
with a predetermined time schedule. In the absence of other
disabling conditions, the operationalState is enabled or disabled.
The value degraded indicates the service provided by the
component is degraded in some way, such as in speed or operating
capacity. However, the resource remains available for service. The
operationalState is enabled.
The value notInstalled indicates the resource is not present. The
operationalState is disabled.
The value logFull is not used.
Description of bits:
inTest(0)
failed(1)
powerOff(2)
offLine(3)
offDuty(4)
dependency(5)
degraded(6)
notInstalled(7)
logFull(8)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.13.2.11.1.4 |
mscShelfCardProceduralStatusIf supported by the component, this attribute indicates the OSI
Procedural status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value initializationRequired indicates (for a resource which
doesn't initialize autonomously) that initialization is required before
it can perform its normal functions, and this procedure has not been
initiated. The operationalState is disabled.
The value notInitialized indicates (for a resource which does
initialize autonomously) that initialization is required before it can
perform its normal functions, and this procedure has not been
initiated. The operationalState may be enabled or disabled.
The value initializing indicates that initialization has been initiated
but is not yet complete. The operationalState may be enabled or
disabled.
The value reporting indicates the resource has completed some
processing operation and is notifying the results. The
operationalState is enabled.
The value terminating indicates the component is in a termination
phase. If the resource doesn't reinitialize autonomously,
operationalState is disabled; otherwise it is enabled or disabled.
Description of bits:
initializationRequired(0)
notInitialized(1)
initializing(2)
reporting(3)
terminating(4)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.13.2.11.1.5 |
mscShelfCardControlStatusIf supported by the component, this attribute indicates the OSI
Control status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value subjectToTest indicates the resource is available but tests
may be conducted simultaneously at unpredictable times, which
may cause it to exhibit unusual characteristics.
The value partOfServicesLocked indicates that part of the service is
restricted from users of a resource. The adminState is unlocked.
The value reservedForTest indicates that the component is
administratively unavailable because it is undergoing a test
procedure. The adminState is locked.
The value suspended indicates that the service has been
administratively suspended.
Description of bits:
subjectToTest(0)
partOfServicesLocked(1)
reservedForTest(2)
suspended(3)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.13.2.11.1.6 |
mscShelfCardAlarmStatusIf supported by the component, this attribute indicates the OSI
Alarm status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value underRepair indicates the component is currently being
repaired. The operationalState is enabled or disabled.
The value critical indicates one or more critical alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value major indicates one or more major alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value minor indicates one or more minor alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value alarmOutstanding generically indicates that an alarm of
some severity is outstanding against the component.
Description of bits:
underRepair(0)
critical(1)
major(2)
minor(3)
alarmOutstanding(4)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.13.2.11.1.7 |
mscShelfCardStandbyStatusIf supported by the component, this attribute indicates the OSI
Standby status of the component.
The value notSet indicates that either the attribute is not supported
or that none of the status conditions described below are present.
Note that this is a non-standard value, used because the original
specification indicated this attribute was set-valued and thus, did not
provide a value to indicate that none of the other three are
applicable.
The value hotStandby indicates that the resource is not providing
service but will be immediately able to take over the role of the
resource to be backed up, without initialization activity, and
containing the same information as the resource to be backed up.
The value coldStandby indicates the resource is a backup for
another resource but will not be immediately able to take over the
role of the backed up resource and will require some initialization
activity.
The value providingService indicates that this component, as a
backup resource, is currently backing up another resource.ro Enumeration .1.3.6.1.4.1.562.36.2.1.13.2.11.1.8 |
mscShelfCardUnknownStatusThis attribute indicates the OSI Unknown status of the component.
The value false indicates that all of the other OSI State and Status
attribute values can be considered accurate.
The value true indicates that the actual state of the component is not
known for sure.ro Enumeration .1.3.6.1.4.1.562.36.2.1.13.2.11.1.9 |
mscShelfCardOperTableThis group contains the operational attributes that reflect the current
status of the card. SEQUENCE OF MscShelfCardOperEntry .1.3.6.1.4.1.562.36.2.1.13.2.12 |
mscShelfCardOperEntryAn entry in the mscShelfCardOperTable. MscShelfCardOperEntry .1.3.6.1.4.1.562.36.2.1.13.2.12.1 |
mscShelfCardCurrentLPThis is the component name of the LP currently running on this
card.roobsolete RowPointer .1.3.6.1.4.1.562.36.2.1.13.2.12.1.1 |
mscShelfCardFailureCauseThis attribute indicates why the card has failed. This attribute is
meaningful when the OSI AvailabilityStatus attribute is set to
failed.
none - The card is operational.
wrongCardType - The wrong card type has been inserted.
notConfigured - The card is not configured.
cannotLoadSoftware - The card can not load software.
failedSelfTests - The card failed itself test.
notResponding - The card is not responding.
backplaneConnectivityProblem - The card is not properly
connected to the backplane.
unsupportedPecCode - The card is with unsupported PEC code
is inserted.ro Enumeration .1.3.6.1.4.1.562.36.2.1.13.2.12.1.2 |
mscShelfCardSelfTestFaultThis attribute indicates the result of the processor card's self-tests
that were performed when it initially came up.ro Enumeration .1.3.6.1.4.1.562.36.2.1.13.2.12.1.3 |
mscShelfCardSparingConnectionStatusThis attribute indicates if the control signal received from a 1forN
sparing panel or a 1for1 sparing panel is properly terminated.
notApplicable - The card is not provisioned as part of a
sparing configuration, and is not connected to any sparing panel.
1for1Ok -The card is provisioned correctly for 1for1 sparing and is
connected to the active relay of a 1for1 sparing panel.
1forNOk -The card is provisioned correctly for either 1for1 or
1forN sparing and is connected to either the standby or active relay
of a 1forN sparing panel.
unconfirmed -The card is provisioned as part of a sparing
configuration, but its connection status cannot be determined.
To determine if the card is connected to a sparing panel, perform a
switchover of the LP to see if the card will grab a relay when it is
active. If the card has grabbed the relay, the sparing connection
status should change from, unconfirmed, to 1for1Ok and the LED
on the sparing panel corresponfing to that relay should be
illuminated.
Please note: Performing the switchover will disrupt traffic on the
other card and this test should be conducted when no traffic is
running on the active card.
notConnected - The card is provisioned as part of a sparing
configuration, but is not connected to a sparing panel.
Remedial Action: Check the cable connectivity between the card
and the sparing panel.
incorrectlyConnected - The card is provisioned as part of a sparing
configuration, but is connected to the wrong port on a 1forN panel,
or is connected to a 1for1 sparing panel while configured for 1forN.
Remedial Action: Connect the cable to the port that was specified
by the sparingConnection attribute.
inconsistentlyConnected - The card is provisioned as part of a
1forN sparing configuration, but is connected to a sparing panel
which is not the same as the other cards sharing the same spare
card.
Remedial Action: Ensure all cards that share the same spare card
are connected to the same sparing panel.
This value is also used to indicate that two sparing panels with the
same sparing panel IDs are being used by cards on the same shelf.
Remedial Action: Replace one of the sparing panels with another
panel that has a different sparing panel ID. Sparing panel IDs are
assigned at the time of manufacture and cannot be changed by the
user.ro Enumeration .1.3.6.1.4.1.562.36.2.1.13.2.12.1.4 |
mscShelfCardHardwareAlarmThis attribute indicates whether and why the card is generating a
hardware alarm.ro Enumeration .1.3.6.1.4.1.562.36.2.1.13.2.12.1.5 |
mscShelfCardPropTableThis group contains the operational attributes that specify the fixed
characteristics of the card. SEQUENCE OF MscShelfCardPropEntry .1.3.6.1.4.1.562.36.2.1.13.2.13 |
mscShelfCardPropEntryAn entry in the mscShelfCardPropTable. MscShelfCardPropEntry .1.3.6.1.4.1.562.36.2.1.13.2.13.1 |
mscShelfCardInsertedCardTypeThis attribute indicates the type of card that is currently inserted in
this slot.ro Enumeration .1.3.6.1.4.1.562.36.2.1.13.2.13.1.1 |
mscShelfCardPmRevisionCodeThis attribute indicates the hardware revision level of the Processor
Module (PM).ro AsciiString .1.3.6.1.4.1.562.36.2.1.13.2.13.1.2 |
mscShelfCardImRevisionCodeThis attribute indicates the hardware revision level of the Interface
Module (IM).ro AsciiString .1.3.6.1.4.1.562.36.2.1.13.2.13.1.3 |
mscShelfCardSerialNumberThis attribute indicates the processor card's serial number.ro AsciiString .1.3.6.1.4.1.562.36.2.1.13.2.13.1.4 |
mscShelfCardActiveFirmwareVersionThis attribute indicates the firmware version of the currently active
flash memory bank.ro AsciiString .1.3.6.1.4.1.562.36.2.1.13.2.13.1.5 |
mscShelfCardInactiveFirmwareVersionThis attribute indicates the firmware version of the currently
inactive flash memory bank.ro AsciiString .1.3.6.1.4.1.562.36.2.1.13.2.13.1.6 |
mscShelfCardProductCodeThis attribute indicates the product ordering code and release of the
card.ro AsciiString .1.3.6.1.4.1.562.36.2.1.13.2.13.1.7 |
mscShelfCardUtilTableThis group contains the operational attributes that specify the
processor's utilization levels. When this group exists for an LP
component, the attributes are representative of the active card. SEQUENCE OF MscShelfCardUtilEntry .1.3.6.1.4.1.562.36.2.1.13.2.14 |
mscShelfCardUtilEntryAn entry in the mscShelfCardUtilTable. MscShelfCardUtilEntry .1.3.6.1.4.1.562.36.2.1.13.2.14.1 |
mscShelfCardTimeIntervalThis attribute indicates the time period (in minutes) for which the
average, minimum and maximum utilization values are calculated.
This attribute is reset to 0 every 15 minutes.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.13.2.14.1.1 |
mscShelfCardCpuUtilThis attribute indicates an approximation of the current processor
utilization level (expressed as a percentage).ro Gauge32 .1.3.6.1.4.1.562.36.2.1.13.2.14.1.2 |
mscShelfCardCpuUtilAvgThis attribute indicates an average processor utilization level over
the specified time period, timeInterval. This average is calculated
based on one minute CPU utilization averages.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.13.2.14.1.3 |
mscShelfCardCpuUtilAvgMinThis attribute indicates the minimum processor utilization level over
a specified time period, timeInterval. This is based on one minute
CPU utilization averages.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.13.2.14.1.4 |
mscShelfCardCpuUtilAvgMaxThis attribute indicates the maximum processor utilization level
over a specified time period, timeInterval. This is based on one
minute CPU utilization averages.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.13.2.14.1.5 |
mscShelfCardMsgBlockUsageThis attribute indicates the processor's current shared message
block memory utilization.
If there is no shared memory on the card, this attribute indicates 0.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.13.2.14.1.6 |
mscShelfCardMsgBlockUsageAvgThis attribute indicates the processor's average memory utilization
of shared message blocks, calculated over a specified time period,
timeInterval. This utilization value is calculated using 15 second
samples. At the start of each timeInterval, this average memory
utilization is reset to the current usage, sharedMsgBlockUsage.
If there is no shared memory on the card, this attribute indicates 0.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.13.2.14.1.7 |
mscShelfCardMsgBlockUsageAvgMinThis attribute indicates the processor's minimum memory
utilization of shared message blocks, calculated over a specified
time period, timeInterval. This utilization value is calculated using
15 second samples. At the start of each timeInterval, this minimum
memory utilization is reset to the current usage,
sharedMsgBlockUsage.
If there is no shared memory on the card, this attribute indicates 0.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.13.2.14.1.8 |
mscShelfCardMsgBlockUsageAvgMaxThis attribute indicates the processor's maximum memory
utilization of shared message blocks, calculated over a specified
time period, timeInterval. This utilization value is calculated using
15 second samples. At the start of each timeInterval, this maximum
memory utilization is reset to the current usage,
sharedMsgBlockUsage.
If there is no shared memory on the card, this attribute indicates 0.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.13.2.14.1.9 |
mscShelfCardLocalMsgBlockUsageThis attribute indicates the processor's current memory utilization
of message blocks which are used for local messaging on the card.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.13.2.14.1.10 |
mscShelfCardLocalMsgBlockUsageAvgThis attribute indicates the processor's average memory utilization
of message blocks used for local messaging on the card, calculated
over a specified time period, timeInterval. This utilization value is
calculated using 15 second samples. At the start of each
timeInterval, this average memory utilization is reset to the current
usage, localMsgBlockUsage.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.13.2.14.1.11 |
mscShelfCardLocalMsgBlockUsageMinThis attribute indicates the processor's minimum memory
utilization of message blocks used for local messaging on the card,
calculated over a specified time period, timeInterval. This
utilization value is updated at 15 second intervals. At the start of
each timeInterval, this minimum memory utilization is reset to the
current usage, localMsgBlockUsage.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.13.2.14.1.12 |
mscShelfCardLocalMsgBlockUsageMaxThis attribute indicates the processor's maximum memory
utilization of message blocks used for local messaging on the card,
calculated over a specified time period, timeInterval. This
utilization value is updated at 15 second intervals. At the start of
each timeInterval, this maximum memory utilization is reset to the
current usage, localMsgBlockUsage.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.13.2.14.1.13 |
mscShelfCardCapTableThis group contains the operational attributes that specify the
processor's capacity levels. When this group exists for an LP
component, the attributes are representative of the active Card. SEQUENCE OF MscShelfCardCapEntry .1.3.6.1.4.1.562.36.2.1.13.2.15 |
mscShelfCardCapEntryAn entry in the mscShelfCardCapTable. MscShelfCardCapEntry .1.3.6.1.4.1.562.36.2.1.13.2.15.1 |
mscShelfCardMsgBlockCapacityThis attribute indicates the processor card's shared message block
memory capacity.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.13.2.15.1.1 |
mscShelfCardLocalMsgBlockCapacityThis attribute indicates the processor card's local message block
memory capacity. These message blocks are used for local
messaging on the card.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.13.2.15.1.2 |
mscShelfCardDcard OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.13.2.16 |
mscShelfCardDcardRowStatusTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
mscShelfCardDcard components. SEQUENCE OF MscShelfCardDcardRowStatusEntry .1.3.6.1.4.1.562.36.2.1.13.2.16.1 |
mscShelfCardDcardRowStatusEntryA single entry in the table represents a single
mscShelfCardDcard component. MscShelfCardDcardRowStatusEntry .1.3.6.1.4.1.562.36.2.1.13.2.16.1.1 |
mscShelfCardDcardRowStatusThis variable is used as the basis for SNMP naming of
mscShelfCardDcard components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.13.2.16.1.1.1 |
mscShelfCardDcardComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.13.2.16.1.1.2 |
mscShelfCardDcardStorageTypeThis variable represents the storage type value for the
mscShelfCardDcard tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.13.2.16.1.1.4 |
mscShelfCardDcardIndexThis variable represents the index for the mscShelfCardDcard tables. Integer32 .1.3.6.1.4.1.562.36.2.1.13.2.16.1.1.10 |
mscShelfCardDcardDcardOperTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group contains the operational attributes of the DaughterCard
component. SEQUENCE OF MscShelfCardDcardDcardOperEntry .1.3.6.1.4.1.562.36.2.1.13.2.16.17 |
mscShelfCardDcardDcardOperEntryAn entry in the mscShelfCardDcardDcardOperTable. MscShelfCardDcardDcardOperEntry .1.3.6.1.4.1.562.36.2.1.13.2.16.17.1 |
mscShelfCardDcardTypeThis attributes indicates the type of a daugher card.ro Enumeration .1.3.6.1.4.1.562.36.2.1.13.2.16.17.1.1 |
mscShelfCardDcardMemorySizeThis attribute indicates the memory size in megabytes of the
daughter card.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.13.2.16.17.1.2 |
mscShelfCardDcardProductCodeThis attribute indicates the product equipment code of the daughter
card.ro AsciiString .1.3.6.1.4.1.562.36.2.1.13.2.16.17.1.3 |
mscShelfCardConfiguredLPsTableThis is a read-only attribute that shows which LPs are currently
configured to run on this card (it is the opposite side of the LP
component's mainCard and spareCard link attributes). Note that
there is only one case where more than one LP can be configured to
run on a card. This is when the card is configured as an N+1 spare.
If this is not the case, the card is configured as a main card or as a
1for1 spare, only one LP can appear in this list. SEQUENCE OF MscShelfCardConfiguredLPsEntry .1.3.6.1.4.1.562.36.2.1.13.2.243 |
mscShelfCardConfiguredLPsEntryAn entry in the mscShelfCardConfiguredLPsTable. MscShelfCardConfiguredLPsEntry .1.3.6.1.4.1.562.36.2.1.13.2.243.1 |
mscShelfCardConfiguredLPsValueThis variable represents both the value and the index for the
mscShelfCardConfiguredLPsTable.ro Link .1.3.6.1.4.1.562.36.2.1.13.2.243.1.1 |
mscShelfCardMemoryCapacityTableThis attribute indicates the processor card's memory capacity for
each type of memory. SEQUENCE OF MscShelfCardMemoryCapacityEntry .1.3.6.1.4.1.562.36.2.1.13.2.244 |
mscShelfCardMemoryCapacityEntryAn entry in the mscShelfCardMemoryCapacityTable. MscShelfCardMemoryCapacityEntry .1.3.6.1.4.1.562.36.2.1.13.2.244.1 |
mscShelfCardMemoryCapacityIndexThis variable represents the mscShelfCardMemoryCapacityTable
specific index for the mscShelfCardMemoryCapacityTable. Enumeration .1.3.6.1.4.1.562.36.2.1.13.2.244.1.1 |
mscShelfCardMemoryCapacityValueThis variable represents an individual value for the
mscShelfCardMemoryCapacityTable.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.13.2.244.1.2 |
mscShelfCardMemoryUsageTableThis attribute indicates the processor's current memory utilization
for each type of memory. SEQUENCE OF MscShelfCardMemoryUsageEntry .1.3.6.1.4.1.562.36.2.1.13.2.245 |
mscShelfCardMemoryUsageEntryAn entry in the mscShelfCardMemoryUsageTable. MscShelfCardMemoryUsageEntry .1.3.6.1.4.1.562.36.2.1.13.2.245.1 |
mscShelfCardMemoryUsageIndexThis variable represents the mscShelfCardMemoryUsageTable
specific index for the mscShelfCardMemoryUsageTable. Enumeration .1.3.6.1.4.1.562.36.2.1.13.2.245.1.1 |
mscShelfCardMemoryUsageValueThis variable represents an individual value for the
mscShelfCardMemoryUsageTable.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.13.2.245.1.2 |
mscShelfCardMemoryUsageAvgTableThis attribute indicates the processor's average memory utilization
for each type of memory in the specified time period, timeInterval.
This value is calculated using 15 second samples. SEQUENCE OF MscShelfCardMemoryUsageAvgEntry .1.3.6.1.4.1.562.36.2.1.13.2.276 |
mscShelfCardMemoryUsageAvgEntryAn entry in the mscShelfCardMemoryUsageAvgTable. MscShelfCardMemoryUsageAvgEntry .1.3.6.1.4.1.562.36.2.1.13.2.276.1 |
mscShelfCardMemoryUsageAvgIndexThis variable represents the mscShelfCardMemoryUsageAvgTable
specific index for the mscShelfCardMemoryUsageAvgTable. Enumeration .1.3.6.1.4.1.562.36.2.1.13.2.276.1.1 |
mscShelfCardMemoryUsageAvgValueThis variable represents an individual value for the
mscShelfCardMemoryUsageAvgTable.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.13.2.276.1.2 |
mscShelfCardMemoryUsageAvgMinTableThis attribute indicates the processor's minimum memory
utilization for each type of memory in the specified time period,
timeInterval. This value is calculated using 15 second samples. SEQUENCE OF MscShelfCardMemoryUsageAvgMinEntry .1.3.6.1.4.1.562.36.2.1.13.2.277 |
mscShelfCardMemoryUsageAvgMinEntryAn entry in the mscShelfCardMemoryUsageAvgMinTable. MscShelfCardMemoryUsageAvgMinEntry .1.3.6.1.4.1.562.36.2.1.13.2.277.1 |
mscShelfCardMemoryUsageAvgMinIndexThis variable represents the mscShelfCardMemoryUsageAvgMinTable
specific index for the mscShelfCardMemoryUsageAvgMinTable. Enumeration .1.3.6.1.4.1.562.36.2.1.13.2.277.1.1 |
mscShelfCardMemoryUsageAvgMinValueThis variable represents an individual value for the
mscShelfCardMemoryUsageAvgMinTable.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.13.2.277.1.2 |
mscShelfCardMemoryUsageAvgMaxTableThis attribute indicates the processor's maximum memory
utilization for each type of memory in the specified time period,
timeInterval. This value is calculated using 15 second samples. SEQUENCE OF MscShelfCardMemoryUsageAvgMaxEntry .1.3.6.1.4.1.562.36.2.1.13.2.278 |
mscShelfCardMemoryUsageAvgMaxEntryAn entry in the mscShelfCardMemoryUsageAvgMaxTable. MscShelfCardMemoryUsageAvgMaxEntry .1.3.6.1.4.1.562.36.2.1.13.2.278.1 |
mscShelfCardMemoryUsageAvgMaxIndexThis variable represents the mscShelfCardMemoryUsageAvgMaxTable
specific index for the mscShelfCardMemoryUsageAvgMaxTable. Enumeration .1.3.6.1.4.1.562.36.2.1.13.2.278.1.1 |
mscShelfCardMemoryUsageAvgMaxValueThis variable represents an individual value for the
mscShelfCardMemoryUsageAvgMaxTable.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.13.2.278.1.2 |
mscShelfCardCurrentLpTableThis attribute indicates which LPs are currently associated with this
card. A card configured as a 1forN spare may be associated with
more than one LP. SEQUENCE OF MscShelfCardCurrentLpEntry .1.3.6.1.4.1.562.36.2.1.13.2.406 |
mscShelfCardCurrentLpEntryAn entry in the mscShelfCardCurrentLpTable. MscShelfCardCurrentLpEntry .1.3.6.1.4.1.562.36.2.1.13.2.406.1 |
mscShelfCardCurrentLpValueThis variable represents both the value and the index for the
mscShelfCardCurrentLpTable.ro RowPointer .1.3.6.1.4.1.562.36.2.1.13.2.406.1.1 |
mscShelfProvTableThis group contains the provisionable attributes for the Shelf
component. SEQUENCE OF MscShelfProvEntry .1.3.6.1.4.1.562.36.2.1.13.10 |
mscShelfProvEntryAn entry in the mscShelfProvTable. MscShelfProvEntry .1.3.6.1.4.1.562.36.2.1.13.10.1 |
mscShelfCommentTextThis is an arbitrary string that can be used to specify the location of
the module. It is not used by the system.rw AsciiString .1.3.6.1.4.1.562.36.2.1.13.10.1.1 |
mscShelfOperTableThis group contains the operational attributes for the Shelf
component. SEQUENCE OF MscShelfOperEntry .1.3.6.1.4.1.562.36.2.1.13.11 |
mscShelfOperEntryAn entry in the mscShelfOperTable. MscShelfOperEntry .1.3.6.1.4.1.562.36.2.1.13.11.1 |
mscShelfBusOperatingModeThis attribute indicates the current backplane bus operating mode:
noBus No bus is in service now.
singleBusX The shelf is running on bus X only.
singleBusY The shelf is running on bus Y only.
dualBus The shelf is running on bus X and bus Y.roobsolete Enumeration .1.3.6.1.4.1.562.36.2.1.13.11.1.1 |
mscShelfHardwareFailuresThis attribute indicates which type of components have failed.The
hardware's fault detection system can report the following kinds of
component failures: card, power converter, cooling unit, terminator
card, fan, input power feed or fabric card failures.
card - The passport card has failed.
powerConverter - The power converter has failed.
coolingUnit - The cooling unit has failed.
terminatorCard - The terminator card has failed.
The following types only apply to fabric-based shelf:
fan - The fan has failed.
inputPowerFeed - The input power feed has failed.
fabricCard - The fabric card has failed.
macAddressCard - Mac address card has failed.
alarmBitsCard - Alarm bit card has failed.
Description of bits:
card(0)
powerConverter(1)
coolingUnit(2)
terminatorCard(3)
fan(4)
powerSupply(5)
fabricCard(6)
macAddressCard(7)
alarmBitsCard(8)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.13.11.1.2 |
mscShelfNumberOfSlotsThis attribute specifies the number of slots for this shelf.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.13.11.1.3 |
mscShelfShelfTypeThis attribute displays the shelf type:
busBasedShelf - bus based backplane shelf.
fabricBasedShelf - fabric base backplane shelf.ro Enumeration .1.3.6.1.4.1.562.36.2.1.13.11.1.5 |
mscShelfBackplaneOperatingModeThis attribute indicates the current backplane operating mode. On
the fabric-based shelf:
noFabric - No fabric is in service now.
singleFabricX - The shelf is running on fabric X only.
singleFabricY - The shelf is running on fabric Y only.
dualFabric - The shelf is running on fabric X and fabric Y.
On the bus-based shelf:
noBus - No bus is in service now.
singleBusX - The shelf is running on bus X only.
singleBusY - The shelf is running on bus Y only.
dualBus - The shelf is running on bus X and bus Yro Enumeration .1.3.6.1.4.1.562.36.2.1.13.11.1.7 |
mscMod OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.16 |
mscModRowStatusTableThis entry controls the addition and deletion of
mscMod components. SEQUENCE OF MscModRowStatusEntry .1.3.6.1.4.1.562.36.2.1.16.1 |
mscModRowStatusEntryA single entry in the table represents a single
mscMod component. MscModRowStatusEntry .1.3.6.1.4.1.562.36.2.1.16.1.1 |
mscModRowStatusThis variable is used as the basis for SNMP naming of
mscMod components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.16.1.1.1 |
mscModComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.16.1.1.2 |
mscModStorageTypeThis variable represents the storage type value for the
mscMod tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.16.1.1.4 |
mscModIndexThis variable represents the index for the mscMod tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.16.1.1.10 |
mscModProvTableMod Provisionable
This group provides attributes that are used by internal and external
systems to identify the module. SEQUENCE OF MscModProvEntry .1.3.6.1.4.1.562.36.2.1.16.10 |
mscModProvEntryAn entry in the mscModProvTable. MscModProvEntry .1.3.6.1.4.1.562.36.2.1.16.10.1 |
mscModNodeIdThe nodeId is a number that uniquely identifies a Magellan Passport
module in a Passport network.
Changing the value of the nodeId will cause the node to restart.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.16.10.1.1 |
mscModNodeNameThe nodeName is a 12 character ASCII string that is unique to every
Passport module in a Passport network. This name is the component
instance value of EM - the root of the Passport component
hierarchy. It has, therefore, the same restriction and behaviour as
any ascii string instance value, e.g., it is converted to upper case.
Note that the EM component is typically suppressed on output.
Changing the value of the nodeName will cause the node to restart.rw AsciiString .1.3.6.1.4.1.562.36.2.1.16.10.1.2 |
mscModNamsIdThis attribute stores the Network Administration (Nams) Identifier
associated with the Passport node. It must be unique across the
entire network of Passport nodes supporting the transport of DPN
traffic as well as all RMs and AMs in the network.
The namsId must be set when a DpnAddressPlan component is
configured on an Passport node.
The namsId is used in the accounting record, statistics record and in
time change accounting record and identifies nodes in these records.
The Nams Id is to be assigned by the network administrator.
Value 49151 indicates that no Nams Id was assigned to the module.
Changing the value of the namsId will cause the node to restart.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.16.10.1.3 |
mscModRegionIdThis attribute identifies the Topology Region to which the node
belongs. Nodes will only exchange topological information with
connected nodes in the same region.
The default value of 0 indicates that no regionId has been assigned
to the module. A module using the default regionId belongs to the
same region as the first neighbour which stages with it using a non-
zero regionId. If another neighbour tries to stage using a different
non-zero regionId, the trunk will not be allowed to come up.
Changing the value of the regionId will NOT cause the node to
restart.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.16.10.1.4 |
mscModNodePrefixThis attribute specifies an NSAP prefix which is distributed to all
other Passport nodes within a Topology region and by which this
node can be identified. This prefix is used by PORS, PNNI routing,
and Data Shunts.
PORS calls that use NSAP addressing (for example, CES) will look
for the node with the longest NSAP prefix that matches the called
party address. The NSAP prefixes that PORS matches against are
the nodePrefix and the alternatePorsPrefixes.
PNNI forms the default value of the nodeAddressPrefix under the
AtmPnni component with this NSAP prefix followed by a unique
MAC address.
Data Shunts uses the nodePrefix to form an NSAP address that is
registered with the Networking API. This NSAP address is used to
identify this node when establishing a Data Shunt.
The value entered must be 26 characters long. All characters must
be hexadecimal with the following restrictions:
- the first two characters must be either '39', '45', or '47'
- if the first two characters are '45', the 18th character must be an
'f' or an 'F'rw AsciiString .1.3.6.1.4.1.562.36.2.1.16.10.1.5 |
mscModNodePrefixesTableThis attribute specifies five different NSAP prefixes which are
distributed to all other Passport nodes within a Topology region and
by which this node can be identified. PORS calls that use NSAP
addressing (for example, CES) will look for the node with the
longest NSAP prefix that matches the called party address. The
default value of the nodeAddressPrefix under the AtmPnni
component is formed by the first NSAP prefix followed by a unique
MAC address. Each NSAP prefix may contain 40 hexadecimal
characters with the exception of the first prefix which has a
maximum length of 26 chracacters.
This attribute was never deployed and will be removed prior to Gate
2..obsolete SEQUENCE OF MscModNodePrefixesEntry .1.3.6.1.4.1.562.36.2.1.16.338 |
mscModNodePrefixesEntryAn entry in the mscModNodePrefixesTable.obsolete MscModNodePrefixesEntry .1.3.6.1.4.1.562.36.2.1.16.338.1 |
mscModNodePrefixesIndexThis variable represents the mscModNodePrefixesTable
specific index for the mscModNodePrefixesTable.obsolete Integer32 .1.3.6.1.4.1.562.36.2.1.16.338.1.1 |
mscModNodePrefixesValueThis variable represents an individual value for the
mscModNodePrefixesTable.rwobsolete AsciiString .1.3.6.1.4.1.562.36.2.1.16.338.1.2 |
mscModAlternatePorsPrefixesTableThis attribute specifies four NSAP prefixes which are distributed to
all other Passport nodes within a Topology region and by which this
node can be identified. These prefixes are used by PORS.
PORS calls that use NSAP addressing (for example, CES) will look
for the node with the longest NSAP prefix that matches the called
party address. The NSAP prefixes that PORS matches against are
the alternatePorsPrefixes and the nodePrefix.
These prefixes may contain up to 40 hexadecimal characters. SEQUENCE OF MscModAlternatePorsPrefixesEntry .1.3.6.1.4.1.562.36.2.1.16.405 |
mscModAlternatePorsPrefixesEntryAn entry in the mscModAlternatePorsPrefixesTable. MscModAlternatePorsPrefixesEntry .1.3.6.1.4.1.562.36.2.1.16.405.1 |
mscModAlternatePorsPrefixesIndexThis variable represents the mscModAlternatePorsPrefixesTable
specific index for the mscModAlternatePorsPrefixesTable. Integer32 .1.3.6.1.4.1.562.36.2.1.16.405.1.1 |
mscModAlternatePorsPrefixesValueThis variable represents an individual value for the
mscModAlternatePorsPrefixesTable.rw AsciiString .1.3.6.1.4.1.562.36.2.1.16.405.1.2 |
baseShelfMIB OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.146 |
IMPORTS Unknown .1.3.6.1.4.1.562.36.2.2.146 |
baseShelfGroup OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.146.1 |
baseShelfGroupCA OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.146.1.1 |
baseShelfGroupCA02 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.146.1.1.3 |
baseShelfGroupCA02A OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.146.1.1.3.2 |
baseShelfCapabilities OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.146.3 |
baseShelfCapabilitiesCA OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.146.3.1 |
baseShelfCapabilitiesCA02 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.146.3.1.3 |
baseShelfCapabilitiesCA02A OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.146.3.1.3.2 |