Nortel-MsCarrier-MscPassport-FabricMIB
AI MIB Summary
Standard SNMP MIB module defining data structures for Nortel-MsCarrier-MscPassport-FabricMIB.
166
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
166 total| Object Name |
|---|
mscShelfCardFabricPort OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.13.2.5 |
mscShelfCardFabricPortRowStatusTableThis entry controls the addition and deletion of
mscShelfCardFabricPort components. SEQUENCE OF MscShelfCardFabricPortRowStatusEntry .1.3.6.1.4.1.562.36.2.1.13.2.5.1 |
mscShelfCardFabricPortRowStatusEntryA single entry in the table represents a single
mscShelfCardFabricPort component. MscShelfCardFabricPortRowStatusEntry .1.3.6.1.4.1.562.36.2.1.13.2.5.1.1 |
mscShelfCardFabricPortRowStatusThis variable is used as the basis for SNMP naming of
mscShelfCardFabricPort components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.13.2.5.1.1.1 |
mscShelfCardFabricPortComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.13.2.5.1.1.2 |
mscShelfCardFabricPortStorageTypeThis variable represents the storage type value for the
mscShelfCardFabricPort tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.13.2.5.1.1.4 |
mscShelfCardFabricPortIndexThis variable represents the index for the mscShelfCardFabricPort tables. Enumeration .1.3.6.1.4.1.562.36.2.1.13.2.5.1.1.10 |
mscShelfCardFabricPortStateTableThis group contains the three OSI State attributes and the six OSI
Status attributes. The descriptions generically indicate what each
attribute implies about the component. Note that not all the values
and state combinations described here are supported by every
component which uses this group. For component-specific
information and the valid state combinations, refer to NTP 241-
7001-150, Passport Operations and Maintenance Guide. SEQUENCE OF MscShelfCardFabricPortStateEntry .1.3.6.1.4.1.562.36.2.1.13.2.5.10 |
mscShelfCardFabricPortStateEntryAn entry in the mscShelfCardFabricPortStateTable. MscShelfCardFabricPortStateEntry .1.3.6.1.4.1.562.36.2.1.13.2.5.10.1 |
mscShelfCardFabricPortAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.13.2.5.10.1.1 |
mscShelfCardFabricPortOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.13.2.5.10.1.2 |
mscShelfCardFabricPortUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.13.2.5.10.1.3 |
mscShelfCardFabricPortAvailabilityStatusIf supported by the component, this attribute indicates the OSI
Availability status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value inTest indicates that the resource is undergoing a test
procedure. If adminState is locked or shuttingDown, the normal
users are precluded from using the resource and controlStatus is
reservedForTest. Tests that do not exclude additional users can be
present in any operational or administrative state but the
reservedForTest condition should not be present.
The value failed indicates that the component has an internal fault
that prevents it from operating. The operationalState is disabled.
The value dependency indicates that the component cannot operate
because some other resource on which it depends is unavailable.
The operationalState is disabled.
The value powerOff indicates the resource requires power to be
applied and it is not powered on. The operationalState is disabled.
The value offLine indicates the resource requires a routine
operation (either manual, automatic, or both) to be performed to
place it on-line and make it available for use. The operationalState
is disabled.
The value offDuty indicates the resource is inactive in accordance
with a predetermined time schedule. In the absence of other
disabling conditions, the operationalState is enabled or disabled.
The value degraded indicates the service provided by the
component is degraded in some way, such as in speed or operating
capacity. However, the resource remains available for service. The
operationalState is enabled.
The value notInstalled indicates the resource is not present. The
operationalState is disabled.
The value logFull is not used.
Description of bits:
inTest(0)
failed(1)
powerOff(2)
offLine(3)
offDuty(4)
dependency(5)
degraded(6)
notInstalled(7)
logFull(8)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.13.2.5.10.1.4 |
mscShelfCardFabricPortProceduralStatusIf supported by the component, this attribute indicates the OSI
Procedural status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value initializationRequired indicates (for a resource which
doesn't initialize autonomously) that initialization is required before
it can perform its normal functions, and this procedure has not been
initiated. The operationalState is disabled.
The value notInitialized indicates (for a resource which does
initialize autonomously) that initialization is required before it can
perform its normal functions, and this procedure has not been
initiated. The operationalState may be enabled or disabled.
The value initializing indicates that initialization has been initiated
but is not yet complete. The operationalState may be enabled or
disabled.
The value reporting indicates the resource has completed some
processing operation and is notifying the results. The
operationalState is enabled.
The value terminating indicates the component is in a termination
phase. If the resource doesn't reinitialize autonomously,
operationalState is disabled; otherwise it is enabled or disabled.
Description of bits:
initializationRequired(0)
notInitialized(1)
initializing(2)
reporting(3)
terminating(4)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.13.2.5.10.1.5 |
mscShelfCardFabricPortControlStatusIf supported by the component, this attribute indicates the OSI
Control status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value subjectToTest indicates the resource is available but tests
may be conducted simultaneously at unpredictable times, which
may cause it to exhibit unusual characteristics.
The value partOfServicesLocked indicates that part of the service is
restricted from users of a resource. The adminState is unlocked.
The value reservedForTest indicates that the component is
administratively unavailable because it is undergoing a test
procedure. The adminState is locked.
The value suspended indicates that the service has been
administratively suspended.
Description of bits:
subjectToTest(0)
partOfServicesLocked(1)
reservedForTest(2)
suspended(3)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.13.2.5.10.1.6 |
mscShelfCardFabricPortAlarmStatusIf supported by the component, this attribute indicates the OSI
Alarm status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value underRepair indicates the component is currently being
repaired. The operationalState is enabled or disabled.
The value critical indicates one or more critical alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value major indicates one or more major alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value minor indicates one or more minor alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value alarmOutstanding generically indicates that an alarm of
some severity is outstanding against the component.
Description of bits:
underRepair(0)
critical(1)
major(2)
minor(3)
alarmOutstanding(4)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.13.2.5.10.1.7 |
mscShelfCardFabricPortStandbyStatusIf supported by the component, this attribute indicates the OSI
Standby status of the component.
The value notSet indicates that either the attribute is not supported
or that none of the status conditions described below are present.
Note that this is a non-standard value, used because the original
specification indicated this attribute was set-valued and thus, did not
provide a value to indicate that none of the other three are
applicable.
The value hotStandby indicates that the resource is not providing
service but will be immediately able to take over the role of the
resource to be backed up, without initialization activity, and
containing the same information as the resource to be backed up.
The value coldStandby indicates the resource is a backup for
another resource but will not be immediately able to take over the
role of the backed up resource and will require some initialization
activity.
The value providingService indicates that this component, as a
backup resource, is currently backing up another resource.ro Enumeration .1.3.6.1.4.1.562.36.2.1.13.2.5.10.1.8 |
mscShelfCardFabricPortUnknownStatusThis attribute indicates the OSI Unknown status of the component.
The value false indicates that all of the other OSI State and Status
attribute values can be considered accurate.
The value true indicates that the actual state of the component is not
known for sure.ro Enumeration .1.3.6.1.4.1.562.36.2.1.13.2.5.10.1.9 |
mscShelfCardFabricPortOperTableThis attribute group contains operational attributes of a fabric port.
This information outlines what the fabric port is doing and why it is
doing it. It is primarily intended for use in diagnosing the cause of a
fabric-related problem reported by the module. SEQUENCE OF MscShelfCardFabricPortOperEntry .1.3.6.1.4.1.562.36.2.1.13.2.5.11 |
mscShelfCardFabricPortOperEntryAn entry in the mscShelfCardFabricPortOperTable. MscShelfCardFabricPortOperEntry .1.3.6.1.4.1.562.36.2.1.13.2.5.11.1 |
mscShelfCardFabricPortFailuresInEffectThis attribute indicates the failures that prevent the fabric port from
using the associated fabric. It may contain any combination of the
following values:
selfTest: The port has failed its self-test.
hardwareError: An unrecoverable critical error has occurred on the
hardware of the processor card which exchanges cells with fabric
card.
portProtocolError: Errors have occurred which violate the protocol
between components of the fabric port in datapath.
switchClockError: The fabric card clock is no longer detected by
the processor card.
livelinessError: A non-fatal hardware error has occurred on the
component which exchanges cells with the fabric card. Excessive
numbers of these errors on the fabric port may be indicating a
serious hardware problem.
dataCorruptionError: Cell payloads or headers are detected as
being corrupted at the fabric port level.
linkLivelinessError: The link between the fabric port and the fabric
card is not indicating liveliness.
Operator action: Run the fabric test to clear these errors.
Description of bits:
selfTest(0)
hardwareError(1)
portProtocolError(2)
switchClockError(3)
livelinessError(4)
dataCorruptionError(5)
linkLivelinessError(6)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.13.2.5.11.1.1 |
mscShelfCardFabricPortDependenciesInEffectThis attribute indicates the non-hardware problems that prevent the
fabric port from using the associated fabric. It may be a
combination of the following values:
fabricLocked: The fabric card is locked.
fabricDisabled: The fabric card is disabled.
portDisabled: The corresponding card port on the fabric is disabled.
Description of bits:
fabricLocked(0)
fabricDisabled(1)
portDisabled(2)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.13.2.5.11.1.2 |
mscShelfCardFabricPortCardsAvailableThis attribute indicates the slot numbers of the cards that the fabric
port considers available through the fabric; that is, the cards that
have an operational port connected to the fabric. The value of this
attribute is determined automatically by the fabric port by
monitoring signals generated by each fabric port connected to the
fabric card. Normally, every card in the module signals its
availability on both fabrics. If a card does not signal its availability
on a fabric, then the card is not present or its fabric port has failed.
By examining this attribute for both of a card's FabricPort
components, it is possible to determine which cards are present in
the module and which fabric each can use.
Note: If failuresInEffect has a value of selfTest, signalLoss,
synchronizationLoss, or protocolError, the fabric port is unable to
monitor the availability of the fabric ports on the fabric. In such
cases, cardsAvailable indicates that no fabric port is available on the
fabric.
Description of bits:
n0(0)
n1(1)
n2(2)
n3(3)
n4(4)
n5(5)
n6(6)
n7(7)
n8(8)
n9(9)
n10(10)
n11(11)
n12(12)
n13(13)
n14(14)
n15(15)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.13.2.5.11.1.3 |
mscShelfCardFabricPortCardsTxToThis attribute indicates the slot number of the cards to which the
fabric port is currently configured to transmit cells. This
configuration is managed automatically, and cannot be changed by
the operator. By examining this attribute for both of a card's
FabricPort components, it is possible to determine which fabric (if
any) the card uses when it needs to transmits cells to a specific card
in the module.
Description of bits:
n0(0)
n1(1)
n2(2)
n3(3)
n4(4)
n5(5)
n6(6)
n7(7)
n8(8)
n9(9)
n10(10)
n11(11)
n12(12)
n13(13)
n14(14)
n15(15)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.13.2.5.11.1.4 |
mscShelfCardFabricPortErrorsTableThis attribute group indicates errors that the fabric port has detected
since the card was last rebooted. This information is intended for
use in detecting and diagnosing fabric-related problems within a
module. SEQUENCE OF MscShelfCardFabricPortErrorsEntry .1.3.6.1.4.1.562.36.2.1.13.2.5.12 |
mscShelfCardFabricPortErrorsEntryAn entry in the mscShelfCardFabricPortErrorsTable. MscShelfCardFabricPortErrorsEntry .1.3.6.1.4.1.562.36.2.1.13.2.5.12.1 |
mscShelfCardFabricPortSelfTestErrorCodeThis attribute indicates the error code generated by the most recent
self-test of the port. Zero indicates that the self-test was successful.
A non-zero value indicates that the self-test failed. This information
is used by the service technician when a defective card is returned
for repair.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.13.2.5.12.1.1 |
mscShelfCardFabricPortLivelinessErrorsThis attribute counts the liveliness errors detected on the port.
Liveliness errors are failures to receive yellow cells within a certain
period of time. The value wraps to zero when it exceeds the
maximum value.
Note: Yellow cells are special types of packets which are generated
by the fabric port and detected by the fabric card and the fabric port
in order to check the link liveness with the fabric card.ro Counter32 .1.3.6.1.4.1.562.36.2.1.13.2.5.12.1.7 |
mscShelfCardFabricPortSwitchClockErrorsThis attribute counts the clock errors which have occurred on this
port. The value wraps to zero when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.13.2.5.12.1.9 |
mscShelfCardFabricPortPortHardwareErrorsThis attribute counts the errors which have occurred on the
hardware which exchanges cells with the fabric card. The value
wraps to zero when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.13.2.5.12.1.18 |
mscShelfCardFabricPortPortProtocolErrorsThis attribute counts the number of errors which affect the protocol
between components of the fabric port datapath. The value wraps to
zero when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.13.2.5.12.1.19 |
mscShelfCardFabricPortDataCorruptionErrorsThis attribute counts the errors which have occurred on the
corrupted cell payloads or headers at fabric port level. The value
wraps to zero when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.13.2.5.12.1.20 |
mscShelfCardFabricPortLinkLivelinessErrorsThis attribute counts the errors which occurred on the link between
the fabric port and the fabric card. The value wraps to zero when it
exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.13.2.5.12.1.21 |
mscShelfFabricCard OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.13.5 |
mscShelfFabricCardRowStatusTableThis entry controls the addition and deletion of
mscShelfFabricCard components. SEQUENCE OF MscShelfFabricCardRowStatusEntry .1.3.6.1.4.1.562.36.2.1.13.5.1 |
mscShelfFabricCardRowStatusEntryA single entry in the table represents a single
mscShelfFabricCard component. MscShelfFabricCardRowStatusEntry .1.3.6.1.4.1.562.36.2.1.13.5.1.1 |
mscShelfFabricCardRowStatusThis variable is used as the basis for SNMP naming of
mscShelfFabricCard components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.13.5.1.1.1 |
mscShelfFabricCardComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.13.5.1.1.2 |
mscShelfFabricCardStorageTypeThis variable represents the storage type value for the
mscShelfFabricCard tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.13.5.1.1.4 |
mscShelfFabricCardIndexThis variable represents the index for the mscShelfFabricCard tables. Enumeration .1.3.6.1.4.1.562.36.2.1.13.5.1.1.10 |
mscShelfFabricCardTest OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.13.5.2 |
mscShelfFabricCardTestRowStatusTableThis entry controls the addition and deletion of
mscShelfFabricCardTest components. SEQUENCE OF MscShelfFabricCardTestRowStatusEntry .1.3.6.1.4.1.562.36.2.1.13.5.2.1 |
mscShelfFabricCardTestRowStatusEntryA single entry in the table represents a single
mscShelfFabricCardTest component. MscShelfFabricCardTestRowStatusEntry .1.3.6.1.4.1.562.36.2.1.13.5.2.1.1 |
mscShelfFabricCardTestRowStatusThis variable is used as the basis for SNMP naming of
mscShelfFabricCardTest components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.13.5.2.1.1.1 |
mscShelfFabricCardTestComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.13.5.2.1.1.2 |
mscShelfFabricCardTestStorageTypeThis variable represents the storage type value for the
mscShelfFabricCardTest tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.13.5.2.1.1.4 |
mscShelfFabricCardTestIndexThis variable represents the index for the mscShelfFabricCardTest tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.13.5.2.1.1.10 |
mscShelfFabricCardTestStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF MscShelfFabricCardTestStateEntry .1.3.6.1.4.1.562.36.2.1.13.5.2.10 |
mscShelfFabricCardTestStateEntryAn entry in the mscShelfFabricCardTestStateTable. MscShelfFabricCardTestStateEntry .1.3.6.1.4.1.562.36.2.1.13.5.2.10.1 |
mscShelfFabricCardTestAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.13.5.2.10.1.1 |
mscShelfFabricCardTestOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.562.36.2.1.13.5.2.10.1.2 |
mscShelfFabricCardTestUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.562.36.2.1.13.5.2.10.1.3 |
mscShelfFabricCardTestSetupTableThis attribute group contains the attributes that govern the operation
of a fabric card test. These attributes cannot be changed while the
fabric card test is running. SEQUENCE OF MscShelfFabricCardTestSetupEntry .1.3.6.1.4.1.562.36.2.1.13.5.2.11 |
mscShelfFabricCardTestSetupEntryAn entry in the mscShelfFabricCardTestSetupTable. MscShelfFabricCardTestSetupEntry .1.3.6.1.4.1.562.36.2.1.13.5.2.11.1 |
mscShelfFabricCardTestDurationThis attribute specifies the maximum length of time that the fabric
card test is allowed to run. The maximum allowed value permits the
fabric card test to be run for up to 30 days.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.13.5.2.11.1.1 |
mscShelfFabricCardTestResultsTableThis attribute group contains the results of the fabric card test that is
currently running; if no fabric card test is running, the attribute
group contains the results of the most recently completed fabric
card test. The attributes of the Results group are reset to their initial
values whenever a fabric card test is started or any attribute in the
Setup group is set. SEQUENCE OF MscShelfFabricCardTestResultsEntry .1.3.6.1.4.1.562.36.2.1.13.5.2.12 |
mscShelfFabricCardTestResultsEntryAn entry in the mscShelfFabricCardTestResultsTable. MscShelfFabricCardTestResultsEntry .1.3.6.1.4.1.562.36.2.1.13.5.2.12.1 |
mscShelfFabricCardTestElapsedTimeThis attribute indicates the length of time that the fabric card test
has been running.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.13.5.2.12.1.1 |
mscShelfFabricCardTestTimeRemainingThis attribute indicates the maximum length of time that the fabric
card test runs before stopping.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.13.5.2.12.1.2 |
mscShelfFabricCardTestCauseOfTerminationThis attribute indicates the reason the fabric card test ended. It
contains one of the following values:
neverStarted: The fabric card test has not been started.
testRunning: The fabric card test is currently running.
testTimeExpired: The fabric card test ran for the specified duration.
stoppedByOperator: A stop command was issued.
portTestFailure: A failure was detected during the port test.
fabricSelfTestFailure: A failure was detected during the fabric
card self-test.
broadcastFailure: A failure was detected during the broadcast test.ro Enumeration .1.3.6.1.4.1.562.36.2.1.13.5.2.12.1.3 |
mscShelfFabricCardTestTestsDoneThis attribute indicates the tests that have been performed during
the fabric card test. It contains zero or more of the following values:
selfTest: The fabric card self-test has been performed.
portTest: The port test has been performed.
broadcastTest: The broadcast test has been performed.
pingTest: At least one ping test has been performed.
Description of bits:
selfTest(0)
portTest(1)
broadcastTest(2)
pingTest(3)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.13.5.2.12.1.4 |
mscShelfFabricCardTestFabricSelfTestResultsThis attribute indicates the results of the fabric's self test. The fabric
test terminates automatically if a failure is detected.
ok: The fabric self test is passed.
failed: The fabric self test is failed.
noTest: The default value indicates no self test is performed.ro Enumeration .1.3.6.1.4.1.562.36.2.1.13.5.2.12.1.5 |
mscShelfFabricCardTestPortTestResultsTableThis attribute indicates the results of the fabric port, indexed by the
slot number of the card containing the fabric port tested. Each entry
contains one of the following values.
+: the port passed its test
X: the port failed its test
.: the port was not tested
The fabric card test terminates automatically if a failure is detected. SEQUENCE OF MscShelfFabricCardTestPortTestResultsEntry .1.3.6.1.4.1.562.36.2.1.13.5.2.468 |
mscShelfFabricCardTestPortTestResultsEntryAn entry in the mscShelfFabricCardTestPortTestResultsTable. MscShelfFabricCardTestPortTestResultsEntry .1.3.6.1.4.1.562.36.2.1.13.5.2.468.1 |
mscShelfFabricCardTestPortTestResultsIndexThis variable represents the mscShelfFabricCardTestPortTestResultsTable
specific index for the mscShelfFabricCardTestPortTestResultsTable. Integer32 .1.3.6.1.4.1.562.36.2.1.13.5.2.468.1.1 |
mscShelfFabricCardTestPortTestResultsValueThis variable represents an individual value for the
mscShelfFabricCardTestPortTestResultsTable.ro Enumeration .1.3.6.1.4.1.562.36.2.1.13.5.2.468.1.2 |
mscShelfFabricCardTestBroadcastTestResultsTableThis attribute indicates the results of the broadcast test, indexed by
the slot numbers of the cards containing the fabric port tested. Each
entry contains one of the following values.
+: a broadcast message was successfully sent from the transmitting
fabric port to the receiving fabric port
X: a broadcast message was not successfully sent from the
transmitting fabric port to the receiving fabric port
.: the associated pair of fabric ports was not tested
The fabric card test terminates automatically if a failure is detected. SEQUENCE OF MscShelfFabricCardTestBroadcastTestResultsEntry .1.3.6.1.4.1.562.36.2.1.13.5.2.469 |
mscShelfFabricCardTestBroadcastTestResultsEntryAn entry in the mscShelfFabricCardTestBroadcastTestResultsTable. MscShelfFabricCardTestBroadcastTestResultsEntry .1.3.6.1.4.1.562.36.2.1.13.5.2.469.1 |
mscShelfFabricCardTestBroadcastTestResultsTxCardIndexThis variable represents the next to last index for the
mscShelfFabricCardTestBroadcastTestResultsTable. Integer32 .1.3.6.1.4.1.562.36.2.1.13.5.2.469.1.1 |
mscShelfFabricCardTestBroadcastTestResultsRxCardIndexThis variable represents the final index for the
mscShelfFabricCardTestBroadcastTestResultsTable. Integer32 .1.3.6.1.4.1.562.36.2.1.13.5.2.469.1.2 |
mscShelfFabricCardTestBroadcastTestResultsValueThis variable represents an individual value for the
mscShelfFabricCardTestBroadcastTestResultsTable.ro Enumeration .1.3.6.1.4.1.562.36.2.1.13.5.2.469.1.3 |
mscShelfFabricCardTestPingTestsTableThis attribute indicates the number of ping tests performed, indexed
by the slot numbers of the cards containing the fabric ports
involved. Each test attempts to transmit a single low-priority frame
from the transmitting fabric port to the receiving fabric port. SEQUENCE OF MscShelfFabricCardTestPingTestsEntry .1.3.6.1.4.1.562.36.2.1.13.5.2.470 |
mscShelfFabricCardTestPingTestsEntryAn entry in the mscShelfFabricCardTestPingTestsTable. MscShelfFabricCardTestPingTestsEntry .1.3.6.1.4.1.562.36.2.1.13.5.2.470.1 |
mscShelfFabricCardTestPingTestsTxCardIndexThis variable represents the next to last index for the
mscShelfFabricCardTestPingTestsTable. Integer32 .1.3.6.1.4.1.562.36.2.1.13.5.2.470.1.1 |
mscShelfFabricCardTestPingTestsRxCardIndexThis variable represents the final index for the
mscShelfFabricCardTestPingTestsTable. Integer32 .1.3.6.1.4.1.562.36.2.1.13.5.2.470.1.2 |
mscShelfFabricCardTestPingTestsValueThis variable represents an individual value for the
mscShelfFabricCardTestPingTestsTable.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.13.5.2.470.1.3 |
mscShelfFabricCardTestPingFailuresTableThis attribute indicates the number of ping test failures detected,
indexed by the slot numbers of the cards containing the fabric ports
involved. Each failure represents a single low-priority frame that
was not successfully transmitted from the transmitting fabric port to
the receiving fabric port. The fabric card test does not terminate
automatically if a failure is detected. SEQUENCE OF MscShelfFabricCardTestPingFailuresEntry .1.3.6.1.4.1.562.36.2.1.13.5.2.471 |
mscShelfFabricCardTestPingFailuresEntryAn entry in the mscShelfFabricCardTestPingFailuresTable. MscShelfFabricCardTestPingFailuresEntry .1.3.6.1.4.1.562.36.2.1.13.5.2.471.1 |
mscShelfFabricCardTestPingFailuresTxCardIndexThis variable represents the next to last index for the
mscShelfFabricCardTestPingFailuresTable. Integer32 .1.3.6.1.4.1.562.36.2.1.13.5.2.471.1.1 |
mscShelfFabricCardTestPingFailuresRxCardIndexThis variable represents the final index for the
mscShelfFabricCardTestPingFailuresTable. Integer32 .1.3.6.1.4.1.562.36.2.1.13.5.2.471.1.2 |
mscShelfFabricCardTestPingFailuresValueThis variable represents an individual value for the
mscShelfFabricCardTestPingFailuresTable.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.13.5.2.471.1.3 |
mscShelfFabricCardCardPort OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.13.5.3 |
mscShelfFabricCardCardPortRowStatusTableThis entry controls the addition and deletion of
mscShelfFabricCardCardPort components. SEQUENCE OF MscShelfFabricCardCardPortRowStatusEntry .1.3.6.1.4.1.562.36.2.1.13.5.3.1 |
mscShelfFabricCardCardPortRowStatusEntryA single entry in the table represents a single
mscShelfFabricCardCardPort component. MscShelfFabricCardCardPortRowStatusEntry .1.3.6.1.4.1.562.36.2.1.13.5.3.1.1 |
mscShelfFabricCardCardPortRowStatusThis variable is used as the basis for SNMP naming of
mscShelfFabricCardCardPort components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.13.5.3.1.1.1 |
mscShelfFabricCardCardPortComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.13.5.3.1.1.2 |
mscShelfFabricCardCardPortStorageTypeThis variable represents the storage type value for the
mscShelfFabricCardCardPort tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.13.5.3.1.1.4 |
mscShelfFabricCardCardPortIndexThis variable represents the index for the mscShelfFabricCardCardPort tables. Integer32 .1.3.6.1.4.1.562.36.2.1.13.5.3.1.1.10 |
mscShelfFabricCardCardPortStateTableThis group contains the three OSI State attributes and the six OSI
Status attributes. The descriptions generically indicate what each
attribute implies about the component. Note that not all the values
and state combinations described here are supported by every
component which uses this group. For component-specific
information and the valid state combinations, refer to NTP 241-
7001-150, Passport Operations and Maintenance Guide. SEQUENCE OF MscShelfFabricCardCardPortStateEntry .1.3.6.1.4.1.562.36.2.1.13.5.3.10 |
mscShelfFabricCardCardPortStateEntryAn entry in the mscShelfFabricCardCardPortStateTable. MscShelfFabricCardCardPortStateEntry .1.3.6.1.4.1.562.36.2.1.13.5.3.10.1 |
mscShelfFabricCardCardPortAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.13.5.3.10.1.1 |
mscShelfFabricCardCardPortOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.13.5.3.10.1.2 |
mscShelfFabricCardCardPortUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.13.5.3.10.1.3 |
mscShelfFabricCardCardPortAvailabilityStatusIf supported by the component, this attribute indicates the OSI
Availability status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value inTest indicates that the resource is undergoing a test
procedure. If adminState is locked or shuttingDown, the normal
users are precluded from using the resource and controlStatus is
reservedForTest. Tests that do not exclude additional users can be
present in any operational or administrative state but the
reservedForTest condition should not be present.
The value failed indicates that the component has an internal fault
that prevents it from operating. The operationalState is disabled.
The value dependency indicates that the component cannot operate
because some other resource on which it depends is unavailable.
The operationalState is disabled.
The value powerOff indicates the resource requires power to be
applied and it is not powered on. The operationalState is disabled.
The value offLine indicates the resource requires a routine
operation (either manual, automatic, or both) to be performed to
place it on-line and make it available for use. The operationalState
is disabled.
The value offDuty indicates the resource is inactive in accordance
with a predetermined time schedule. In the absence of other
disabling conditions, the operationalState is enabled or disabled.
The value degraded indicates the service provided by the
component is degraded in some way, such as in speed or operating
capacity. However, the resource remains available for service. The
operationalState is enabled.
The value notInstalled indicates the resource is not present. The
operationalState is disabled.
The value logFull is not used.
Description of bits:
inTest(0)
failed(1)
powerOff(2)
offLine(3)
offDuty(4)
dependency(5)
degraded(6)
notInstalled(7)
logFull(8)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.13.5.3.10.1.4 |
mscShelfFabricCardCardPortProceduralStatusIf supported by the component, this attribute indicates the OSI
Procedural status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value initializationRequired indicates (for a resource which
doesn't initialize autonomously) that initialization is required before
it can perform its normal functions, and this procedure has not been
initiated. The operationalState is disabled.
The value notInitialized indicates (for a resource which does
initialize autonomously) that initialization is required before it can
perform its normal functions, and this procedure has not been
initiated. The operationalState may be enabled or disabled.
The value initializing indicates that initialization has been initiated
but is not yet complete. The operationalState may be enabled or
disabled.
The value reporting indicates the resource has completed some
processing operation and is notifying the results. The
operationalState is enabled.
The value terminating indicates the component is in a termination
phase. If the resource doesn't reinitialize autonomously,
operationalState is disabled; otherwise it is enabled or disabled.
Description of bits:
initializationRequired(0)
notInitialized(1)
initializing(2)
reporting(3)
terminating(4)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.13.5.3.10.1.5 |
mscShelfFabricCardCardPortControlStatusIf supported by the component, this attribute indicates the OSI
Control status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value subjectToTest indicates the resource is available but tests
may be conducted simultaneously at unpredictable times, which
may cause it to exhibit unusual characteristics.
The value partOfServicesLocked indicates that part of the service is
restricted from users of a resource. The adminState is unlocked.
The value reservedForTest indicates that the component is
administratively unavailable because it is undergoing a test
procedure. The adminState is locked.
The value suspended indicates that the service has been
administratively suspended.
Description of bits:
subjectToTest(0)
partOfServicesLocked(1)
reservedForTest(2)
suspended(3)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.13.5.3.10.1.6 |
mscShelfFabricCardCardPortAlarmStatusIf supported by the component, this attribute indicates the OSI
Alarm status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value underRepair indicates the component is currently being
repaired. The operationalState is enabled or disabled.
The value critical indicates one or more critical alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value major indicates one or more major alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value minor indicates one or more minor alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value alarmOutstanding generically indicates that an alarm of
some severity is outstanding against the component.
Description of bits:
underRepair(0)
critical(1)
major(2)
minor(3)
alarmOutstanding(4)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.13.5.3.10.1.7 |
mscShelfFabricCardCardPortStandbyStatusIf supported by the component, this attribute indicates the OSI
Standby status of the component.
The value notSet indicates that either the attribute is not supported
or that none of the status conditions described below are present.
Note that this is a non-standard value, used because the original
specification indicated this attribute was set-valued and thus, did not
provide a value to indicate that none of the other three are
applicable.
The value hotStandby indicates that the resource is not providing
service but will be immediately able to take over the role of the
resource to be backed up, without initialization activity, and
containing the same information as the resource to be backed up.
The value coldStandby indicates the resource is a backup for
another resource but will not be immediately able to take over the
role of the backed up resource and will require some initialization
activity.
The value providingService indicates that this component, as a
backup resource, is currently backing up another resource.ro Enumeration .1.3.6.1.4.1.562.36.2.1.13.5.3.10.1.8 |
mscShelfFabricCardCardPortUnknownStatusThis attribute indicates the OSI Unknown status of the component.
The value false indicates that all of the other OSI State and Status
attribute values can be considered accurate.
The value true indicates that the actual state of the component is not
known for sure.ro Enumeration .1.3.6.1.4.1.562.36.2.1.13.5.3.10.1.9 |
mscShelfFabricCardCardPortOperTableThis attribute group contains operational attributes of a card port.
This information outlines what the card port is doing and why it is
doing it and is primarily intended for use in diagnosing the cause of
a port-related problem reported by the module. SEQUENCE OF MscShelfFabricCardCardPortOperEntry .1.3.6.1.4.1.562.36.2.1.13.5.3.11 |
mscShelfFabricCardCardPortOperEntryAn entry in the mscShelfFabricCardCardPortOperTable. MscShelfFabricCardCardPortOperEntry .1.3.6.1.4.1.562.36.2.1.13.5.3.11.1 |
mscShelfFabricCardCardPortFailuresInEffectThis attribute indicates the hardware problems that prevent the
CardPort from using the fabric. It may contain any combination of
the following values.
selfTest: The port has failed its self-test.
crcError: The port has detected too many CRC errors.
signalLoss: The serial link receiver is not receiving a signal.
That is, the electrical connection to the far end transmitter is not
valid.
flowControlViolation: An unacceptable number of flow control
violation errors have occurred.
synchronizationLoss: The serial link's phase or alignment is lost.
Therefore, the port's synchronization is lost.
queueFull: The output queue is full.
syncLoss: The card port has lost synchronization with the fabric
port.
Description of bits:
selfTest(0)
crcError(1)
signalLoss(2)
flowControlViolation(3)
synchronizationLoss(4)
queueFull(5)
syncLoss(6)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.13.5.3.11.1.1 |
mscShelfFabricCardCardPortDependenciesInEffectThis attribute indicates the non-hardware problems that prevent the
port from using the associated fabric. It may contain the following
values:
fabricLocked - The fabric card is locked.
fabricDisabled - The fabric card is disabled.
portDisabled - The corresponding fabric port is disabled.
cardNotInserted - The corresponding processor card is not inserted.
Description of bits:
fabricLocked(0)
fabricDisabled(1)
portDisabled(2)
cardNotInserted(3)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.13.5.3.11.1.2 |
mscShelfFabricCardCardPortCardPortErrorsTableThis attribute group indicates errors that the card port has detected
since the fabric card was last rebooted. This information is intended
for use in detecting and diagnosing port-related problems within a
module. SEQUENCE OF MscShelfFabricCardCardPortCardPortErrorsEntry .1.3.6.1.4.1.562.36.2.1.13.5.3.12 |
mscShelfFabricCardCardPortCardPortErrorsEntryAn entry in the mscShelfFabricCardCardPortCardPortErrorsTable. MscShelfFabricCardCardPortCardPortErrorsEntry .1.3.6.1.4.1.562.36.2.1.13.5.3.12.1 |
mscShelfFabricCardCardPortSelfTestErrorCodeThis attribute indicates the error code generated by the most recent
self-test of the port.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.13.5.3.12.1.1 |
mscShelfFabricCardCardPortDataOrAddressCrcErrorsThis attribute indicates the packet data or address CRC errors
encountered on the port. The value wraps to zero when it exceeds
the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.13.5.3.12.1.2 |
mscShelfFabricCardCardPortFlowControlViolationErrorsThis attribute counts the flow control violations (that is 'threshold
exceeded errors') detected on the port. The value wraps to zero
when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.13.5.3.12.1.3 |
mscShelfFabricCardCardPortLivelinessErrorsThis attribute counts the liveliness errors detected on the card port.
Liveliness errors are failures to receive yellow cells within a certain
period of time. The value wraps to zero when it exceeds the
maximum value.
Note: Yellow cells are special types of packets which are generated
by the fabric port and detected by the fabric card and the fabric port
in order to check the link liveness with the fabric card.ro Counter32 .1.3.6.1.4.1.562.36.2.1.13.5.3.12.1.4 |
mscShelfFabricCardCardPortLossOfSignalOrSyncErrorsThis attribute counts the loss of signal or loss of synchronization
errors on the port that caused the port to fail. The value wraps to
zero when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.13.5.3.12.1.5 |
mscShelfFabricCardStateTableThis group contains the three OSI State attributes and the six OSI
Status attributes. The descriptions generically indicate what each
attribute implies about the component. Note that not all the values
and state combinations described here are supported by every
component which uses this group. For component-specific
information and the valid state combinations, refer to NTP 241-
7001-150, Passport Operations and Maintenance Guide. SEQUENCE OF MscShelfFabricCardStateEntry .1.3.6.1.4.1.562.36.2.1.13.5.10 |
mscShelfFabricCardStateEntryAn entry in the mscShelfFabricCardStateTable. MscShelfFabricCardStateEntry .1.3.6.1.4.1.562.36.2.1.13.5.10.1 |
mscShelfFabricCardAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.13.5.10.1.1 |
mscShelfFabricCardOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.13.5.10.1.2 |
mscShelfFabricCardUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.13.5.10.1.3 |
mscShelfFabricCardAvailabilityStatusIf supported by the component, this attribute indicates the OSI
Availability status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value inTest indicates that the resource is undergoing a test
procedure. If adminState is locked or shuttingDown, the normal
users are precluded from using the resource and controlStatus is
reservedForTest. Tests that do not exclude additional users can be
present in any operational or administrative state but the
reservedForTest condition should not be present.
The value failed indicates that the component has an internal fault
that prevents it from operating. The operationalState is disabled.
The value dependency indicates that the component cannot operate
because some other resource on which it depends is unavailable.
The operationalState is disabled.
The value powerOff indicates the resource requires power to be
applied and it is not powered on. The operationalState is disabled.
The value offLine indicates the resource requires a routine
operation (either manual, automatic, or both) to be performed to
place it on-line and make it available for use. The operationalState
is disabled.
The value offDuty indicates the resource is inactive in accordance
with a predetermined time schedule. In the absence of other
disabling conditions, the operationalState is enabled or disabled.
The value degraded indicates the service provided by the
component is degraded in some way, such as in speed or operating
capacity. However, the resource remains available for service. The
operationalState is enabled.
The value notInstalled indicates the resource is not present. The
operationalState is disabled.
The value logFull is not used.
Description of bits:
inTest(0)
failed(1)
powerOff(2)
offLine(3)
offDuty(4)
dependency(5)
degraded(6)
notInstalled(7)
logFull(8)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.13.5.10.1.4 |
mscShelfFabricCardProceduralStatusIf supported by the component, this attribute indicates the OSI
Procedural status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value initializationRequired indicates (for a resource which
doesn't initialize autonomously) that initialization is required before
it can perform its normal functions, and this procedure has not been
initiated. The operationalState is disabled.
The value notInitialized indicates (for a resource which does
initialize autonomously) that initialization is required before it can
perform its normal functions, and this procedure has not been
initiated. The operationalState may be enabled or disabled.
The value initializing indicates that initialization has been initiated
but is not yet complete. The operationalState may be enabled or
disabled.
The value reporting indicates the resource has completed some
processing operation and is notifying the results. The
operationalState is enabled.
The value terminating indicates the component is in a termination
phase. If the resource doesn't reinitialize autonomously,
operationalState is disabled; otherwise it is enabled or disabled.
Description of bits:
initializationRequired(0)
notInitialized(1)
initializing(2)
reporting(3)
terminating(4)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.13.5.10.1.5 |
mscShelfFabricCardControlStatusIf supported by the component, this attribute indicates the OSI
Control status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value subjectToTest indicates the resource is available but tests
may be conducted simultaneously at unpredictable times, which
may cause it to exhibit unusual characteristics.
The value partOfServicesLocked indicates that part of the service is
restricted from users of a resource. The adminState is unlocked.
The value reservedForTest indicates that the component is
administratively unavailable because it is undergoing a test
procedure. The adminState is locked.
The value suspended indicates that the service has been
administratively suspended.
Description of bits:
subjectToTest(0)
partOfServicesLocked(1)
reservedForTest(2)
suspended(3)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.13.5.10.1.6 |
mscShelfFabricCardAlarmStatusIf supported by the component, this attribute indicates the OSI
Alarm status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value underRepair indicates the component is currently being
repaired. The operationalState is enabled or disabled.
The value critical indicates one or more critical alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value major indicates one or more major alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value minor indicates one or more minor alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value alarmOutstanding generically indicates that an alarm of
some severity is outstanding against the component.
Description of bits:
underRepair(0)
critical(1)
major(2)
minor(3)
alarmOutstanding(4)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.13.5.10.1.7 |
mscShelfFabricCardStandbyStatusIf supported by the component, this attribute indicates the OSI
Standby status of the component.
The value notSet indicates that either the attribute is not supported
or that none of the status conditions described below are present.
Note that this is a non-standard value, used because the original
specification indicated this attribute was set-valued and thus, did not
provide a value to indicate that none of the other three are
applicable.
The value hotStandby indicates that the resource is not providing
service but will be immediately able to take over the role of the
resource to be backed up, without initialization activity, and
containing the same information as the resource to be backed up.
The value coldStandby indicates the resource is a backup for
another resource but will not be immediately able to take over the
role of the backed up resource and will require some initialization
activity.
The value providingService indicates that this component, as a
backup resource, is currently backing up another resource.ro Enumeration .1.3.6.1.4.1.562.36.2.1.13.5.10.1.8 |
mscShelfFabricCardUnknownStatusThis attribute indicates the OSI Unknown status of the component.
The value false indicates that all of the other OSI State and Status
attribute values can be considered accurate.
The value true indicates that the actual state of the component is not
known for sure.ro Enumeration .1.3.6.1.4.1.562.36.2.1.13.5.10.1.9 |
mscShelfFabricCardPropTableThis attribute group indicates property attributes of a fabric card. SEQUENCE OF MscShelfFabricCardPropEntry .1.3.6.1.4.1.562.36.2.1.13.5.11 |
mscShelfFabricCardPropEntryAn entry in the mscShelfFabricCardPropTable. MscShelfFabricCardPropEntry .1.3.6.1.4.1.562.36.2.1.13.5.11.1 |
mscShelfFabricCardProductCodeThis attribute indicates the product code (that is the PEC and
revision codes) of the fabric card.ro AsciiString .1.3.6.1.4.1.562.36.2.1.13.5.11.1.1 |
mscShelfFabricCardSerialNumberThis attribute indicates the serial number of the fabric card.ro AsciiString .1.3.6.1.4.1.562.36.2.1.13.5.11.1.2 |
mscShelfFabricCardOperTableThis attribute group contains operational attributes of a FabricCard
component. SEQUENCE OF MscShelfFabricCardOperEntry .1.3.6.1.4.1.562.36.2.1.13.5.12 |
mscShelfFabricCardOperEntryAn entry in the mscShelfFabricCardOperTable. MscShelfFabricCardOperEntry .1.3.6.1.4.1.562.36.2.1.13.5.12.1 |
mscShelfFabricCardFailureCauseThis attribute indicates why the fabric card has failed. This attribute
is meaningful when the OSI availabilityStatus attribute is set to
failed. Possible values are:
queueFull: The fabric card buffers are full.
notInserted: The fabric card is not inserted.
failedSelfTest: The fabric card has failed its self test.
internalFailure: The fabric card has internal ASIC failure.
notResponding: The fabric card is not responding.
highTemperature: The fabric card is running at high temperature.
powerProblem: The fabric card has a power problem.
fabricStateUnknown: The fabric card is inserted, but it is in an
unknown state.
Description of bits:
queueFull(0)
notInserted(1)
failedSelfTest(2)
internalFailure(3)
notResponding(4)
highTemperature(5)
powerProblem(6)
fabricStateUnknown(7)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.13.5.12.1.1 |
mscShelfFabricCardUtilizationThis attribute indicates an approximation of the current fabric
utilization.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.13.5.12.1.2 |
mscShelfFabricCardOperatingTemperatureThis attribute indicates the current fabric operating temperature.
When the temperature reaches the value specified by the
temperatureThreshold attribute, the fabric card generates an alarm.ro FixedPoint1 .1.3.6.1.4.1.562.36.2.1.13.5.12.1.3 |
mscShelfFabricCardSecondaryControlBusStatusThis attribute indicates the state of the fabric's Secondary Control
Bus (SCB). It may contain any combination of the following values:
operational - The SCB is operational.
locked - The SCB is being manually prevented from operating.
noBus - The bus is down.
failed - The SCB is disabled due to fault.
bestEffort - The SCB is ignoring faults to allow a single channel to
be operational.
hardwareFailure - The bus failed due to an HSCX hardware error.
parityOrCrcError - The bus failed due to a CRC error or a parity
error.
timeOutError - The bus failed due to an SSC message time-out.
txOrRxError - The bus failed due to Tx or Rx problems.
pollError - The bus failed an SCB poll.
testMessageError - The bus failed a fabric card test.
Description of bits:
operational(0)
locked(1)
noBus(2)
failed(3)
bestEffort(4)
hardwareFailure(5)
parityOrCrcError(6)
timeOutError(7)
txOrRxError(8)
pollError(9)
testMessageError(10)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.13.5.12.1.4 |
mscShelfFabricCardSelfTestResultsThis attribute indicates the result of the most recent execution of the
fabric card's self-tests, performed either when it initially came up,
or during operation. A value of 0 indicates success, and a non-zero
value indicates a failure or and absent fabric card.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.13.5.12.1.5 |
mscShelfFabricCardDependencyInEffectThis attribute indicates why the fabric card has failed. This attribute
is meaningful when the OSI availabilityStatus attribute is set to
depend. Possible values are:
portDisabled: Card port or fabric port is disabled.
fabricCardLocked: The fabric card is locked.
Description of bits:
portDisabled(0)
fabricCardLocked(1)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.13.5.12.1.6 |
mscShelfFabricCardVoltageAFeedDetectedThis attribute indicates if the fabric card is detecting current on
power feed A. If it is not, check that the breaker is not turned off.ro Enumeration .1.3.6.1.4.1.562.36.2.1.13.5.12.1.7 |
mscShelfFabricCardVoltageBFeedDetectedThis attribute indicates if the fabric card is detecting current on
power feed B. If it is not, check that the breaker is not turned off.ro Enumeration .1.3.6.1.4.1.562.36.2.1.13.5.12.1.8 |
mscShelfFabricCardTemperatureThresholdThis attributes indicates at which temperature the fabric card
generates a temperature alarm.ro FixedPoint1 .1.3.6.1.4.1.562.36.2.1.13.5.12.1.9 |
mscShelfFabricCardErrorsTableThis attribute group indicates errors that the fabric card has detected
since the card was last rebooted. This information is intended for
use in detecting and diagnosing the fabric-related problems within a
module. SEQUENCE OF MscShelfFabricCardErrorsEntry .1.3.6.1.4.1.562.36.2.1.13.5.13 |
mscShelfFabricCardErrorsEntryAn entry in the mscShelfFabricCardErrorsTable. MscShelfFabricCardErrorsEntry .1.3.6.1.4.1.562.36.2.1.13.5.13.1 |
mscShelfFabricCardVoltageErrorsThis attribute counts the voltage errors detected on the fabric. The
value wraps to zero when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.13.5.13.1.1 |
mscShelfFabricCardTemperatureErrorsThis attribute counts the temperature errors encountered on the
fabric card. The value wraps to zero when it exceeds the maximum
value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.13.5.13.1.2 |
mscShelfFabricCardBanksTableThis group contains the attributes that govern the operation of a
fabric card banks. These attributes cannot be changed while the
fabric card writable bank is loading. SEQUENCE OF MscShelfFabricCardBanksEntry .1.3.6.1.4.1.562.36.2.1.13.5.14 |
mscShelfFabricCardBanksEntryAn entry in the mscShelfFabricCardBanksTable. MscShelfFabricCardBanksEntry .1.3.6.1.4.1.562.36.2.1.13.5.14.1 |
mscShelfFabricCardFixedBankVersionThis attribute indicates what the fabric card software version in the
fixed bank is. It is zero during start-up. After start-up it is queried
from the fabric card.ro FixedPoint1 .1.3.6.1.4.1.562.36.2.1.13.5.14.1.1 |
mscShelfFabricCardWritableBankVersionThis attribute indicates the software version that is loaded on the
writable bank. It is zero if there is no version loaded.ro FixedPoint1 .1.3.6.1.4.1.562.36.2.1.13.5.14.1.2 |
mscShelfFabricCardRecommendedVersionToInstallThis attribute indicates the recommended fabric application version
to install using the Install command. If the current active software is
up-to-date, it indicates no version is needed to install.ro AsciiString .1.3.6.1.4.1.562.36.2.1.13.5.14.1.3 |
mscShelfFabricCardActiveBankThis attribute indicates which bank is the currently running. The
writable bank can only be made active if it has been installed using
the Install command at least once.
writable: Indicates the writable bank is the active bank.
fixed: Indicates the fixed bank is the active bank.
unknown: The software has not yet determined which is the active
bank. This normally takes a few seconds when the software is first
activated.rw Enumeration .1.3.6.1.4.1.562.36.2.1.13.5.14.1.4 |
mscShelfFabricCardBankOnShelfRestartThis attribute indicates which bank will be running when the shelf
is reset or powered-down and then powered-up.
writable: Indicates the writable bank will be the bank on the next
power up or reset.
fixed: Indicates the fixed bank will be the bank on the next power
up or reset.
unknown: The software has not yet determined which is the bank
on shelf restart. This normally takes a few seconds when the
software is first activated.ro Enumeration .1.3.6.1.4.1.562.36.2.1.13.5.14.1.5 |
mscShelfFabricCardWritableBankStatusThis attribute specifies the current status of the writable bank. It is
set to unknown until the status is determined by the software. It
takes a few seconds at software activation time to determine the
status of the writable bank.
unknown: The switch has not yet determined the state of the
writable bank. This happens only within the first few seconds the
software is activated.
empty: No (valid) software is loaded in the writable bank.
loading: Software is currently loading into the writable bank.
loaded: The software has successfully loaded.
An example of a transition sequence for the writable bank status is:
unknown -> empty-> loading -> loaded-> loading.
On a failure, the status reverts to the previous status that was
successful. For example if the loading fails, the status returns to
empty.ro Enumeration .1.3.6.1.4.1.562.36.2.1.13.5.14.1.6 |
mscShelfFabricCardSecondaryControlBusCardBustapsTableEach processor card has a bus tap on both of the system's secondary
control buses. This indicates the state of each processor card's bus
tap onto the secondary control bus for which clocking is supplied by
this fabric card. Possible values are:
ok - The SCB is operational.
hardwareFailure - The bus failed due to an HSCX hardware error.
parityOrCrcErrors - The bus failed due to a CRC error or a parity
error.
timeOutError - The bus failed due to an SSC message time-out.
txOrRxError - The bus failed due to Tx or Rx problems.
pollError - The bus failed an SCB poll.
none - The processor card is not available. SEQUENCE OF MscShelfFabricCardSecondaryControlBusCardBustapsEntry .1.3.6.1.4.1.562.36.2.1.13.5.443 |
mscShelfFabricCardSecondaryControlBusCardBustapsEntryAn entry in the mscShelfFabricCardSecondaryControlBusCardBustapsTable. MscShelfFabricCardSecondaryControlBusCardBustapsEntry .1.3.6.1.4.1.562.36.2.1.13.5.443.1 |
mscShelfFabricCardSecondaryControlBusCardBustapsIndexThis variable represents the mscShelfFabricCardSecondaryControlBusCardBustapsTable
specific index for the mscShelfFabricCardSecondaryControlBusCardBustapsTable. Integer32 .1.3.6.1.4.1.562.36.2.1.13.5.443.1.1 |
mscShelfFabricCardSecondaryControlBusCardBustapsValueThis variable represents an individual value for the
mscShelfFabricCardSecondaryControlBusCardBustapsTable.ro Enumeration .1.3.6.1.4.1.562.36.2.1.13.5.443.1.2 |
mscShelfFabricCardSecondaryControlBusFabricBustapsTableEach fabric card has a bus tap on both of the system's secondary
control buses. This indicates the state of each fabric card's bus tap
onto the secondary control bus for which clocking is supplied by
this fabric card. The enumerated values describe the state of the
each bus tap.
Possible values are:
ok - The SCB is operational.
txOrRxError - The bus failed due to Tx or Rx problems.
pollError - The bus failed an SCB poll.
testMessageError - The bus failed a fabric card test.
none - The processor card is not available.
unknown - The state cannot be determined due to faulty bustap on
CP. SEQUENCE OF MscShelfFabricCardSecondaryControlBusFabricBustapsEntry .1.3.6.1.4.1.562.36.2.1.13.5.445 |
mscShelfFabricCardSecondaryControlBusFabricBustapsEntryAn entry in the mscShelfFabricCardSecondaryControlBusFabricBustapsTable. MscShelfFabricCardSecondaryControlBusFabricBustapsEntry .1.3.6.1.4.1.562.36.2.1.13.5.445.1 |
mscShelfFabricCardSecondaryControlBusFabricBustapsIndexThis variable represents the mscShelfFabricCardSecondaryControlBusFabricBustapsTable
specific index for the mscShelfFabricCardSecondaryControlBusFabricBustapsTable. Enumeration .1.3.6.1.4.1.562.36.2.1.13.5.445.1.1 |
mscShelfFabricCardSecondaryControlBusFabricBustapsValueThis variable represents an individual value for the
mscShelfFabricCardSecondaryControlBusFabricBustapsTable.ro Enumeration .1.3.6.1.4.1.562.36.2.1.13.5.445.1.2 |
fabricMIB OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.145 |
IMPORTS Unknown .1.3.6.1.4.1.562.36.2.2.145 |
fabricGroup OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.145.1 |
fabricGroupCA OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.145.1.1 |
fabricGroupCA02 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.145.1.1.3 |
fabricGroupCA02A OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.145.1.1.3.2 |
fabricCapabilities OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.145.3 |
fabricCapabilitiesCA OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.145.3.1 |
fabricCapabilitiesCA02 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.145.3.1.3 |
fabricCapabilitiesCA02A OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.145.3.1.3.2 |