Nortel-Magellan-Passport-SourceRouteEndStationMIB
AI MIB Summary
Standard SNMP MIB module defining data structures for Nortel-Magellan-Passport-SourceRouteEndStationMIB.
52
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
52 total| Object Name |
|---|
sourceRouteEndStationMIB OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.54 |
IMPORTS Unknown .1.3.6.1.4.1.562.2.4.2.54 |
sourceRouteEndStationGroup OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.54.1 |
sourceRouteEndStationGroupBD OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.54.1.4 |
sourceRouteEndStationGroupBD01 OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.54.1.4.2 |
sourceRouteEndStationGroupBD01A OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.54.1.4.2.2 |
sourceRouteEndStationCapabilities OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.54.3 |
sourceRouteEndStationCapabilitiesBD OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.54.3.4 |
sourceRouteEndStationCapabilitiesBD01 OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.54.3.4.2 |
sourceRouteEndStationCapabilitiesBD01A OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.54.3.4.2.2 |
vrSres OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.100.13 |
vrSresRowStatusTableThis entry controls the addition and deletion of
vrSres components. SEQUENCE OF VrSresRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.100.13.1 |
vrSresRowStatusEntryA single entry in the table represents a single
vrSres component. VrSresRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.100.13.1.1 |
vrSresRowStatusThis variable is used as the basis for SNMP naming of
vrSres components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.100.13.1.1.1 |
vrSresComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.100.13.1.1.2 |
vrSresStorageTypeThis variable represents the storage type value for the
vrSres tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.100.13.1.1.4 |
vrSresIndexThis variable represents the index for the vrSres tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.100.13.1.1.10 |
vrSresRe OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.100.13.2 |
vrSresReRowStatusTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
vrSresRe components. SEQUENCE OF VrSresReRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.100.13.2.1 |
vrSresReRowStatusEntryA single entry in the table represents a single
vrSresRe component. VrSresReRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.100.13.2.1.1 |
vrSresReRowStatusThis variable is used as the basis for SNMP naming of
vrSresRe components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.100.13.2.1.1.1 |
vrSresReComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.100.13.2.1.1.2 |
vrSresReStorageTypeThis variable represents the storage type value for the
vrSresRe tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.100.13.2.1.1.4 |
vrSresReDestMacAddressIndexThis variable represents an index for the vrSresRe tables. DashedHexString .1.3.6.1.4.1.3764.1.1.30.100.13.2.1.1.10 |
vrSresReProtocolPortNameIndexThis variable represents an index for the vrSresRe tables. AsciiStringIndex .1.3.6.1.4.1.3764.1.1.30.100.13.2.1.1.11 |
vrSresReOperTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group contains information relating to a source routing destination
address. SEQUENCE OF VrSresReOperEntry .1.3.6.1.4.1.3764.1.1.30.100.13.2.10 |
vrSresReOperEntryAn entry in the vrSresReOperTable. VrSresReOperEntry .1.3.6.1.4.1.3764.1.1.30.100.13.2.10.1 |
vrSresReRouteControlThis is the value of the routing control field for this route.ro HexString .1.3.6.1.4.1.3764.1.1.30.100.13.2.10.1.1 |
vrSresReRifLengthThis attribute is used to display the length of the routing information
field in the routing control field.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.100.13.2.10.1.2 |
vrSresReRdDirectionThis attribute indicates the direction to use routing descriptors (RDs). If
set to leftToRight the routing descriptors, displayed in routeDescr, will
be interpreted from left to right. If set to rightToLeft they will be
interpreted from right to left. If rifLength is zero, this attribute will be
set to noRif to indicate that there are no routing descriptors to be read.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.100.13.2.10.1.3 |
vrSresReRouteDescrThis is the embedded sequence of bridge and ring IDs for this route. For
destinations on the local ring, the value of this attribute is the zero-
length string. Refer to rdDirection for the direction in which to read the
route descriptors. The format of the hexadecimal data displayed is as
follows:
12 bit Ring Number - 4 bit Bridge Number...
XXX-X XXX-X XXX-X...ro AsciiString .1.3.6.1.4.1.3764.1.1.30.100.13.2.10.1.4 |
vrSresAdminControlTableThis group includes the Administrative Control attribute. This attribute
defines the current administrative state of this component. SEQUENCE OF VrSresAdminControlEntry .1.3.6.1.4.1.3764.1.1.30.100.13.10 |
vrSresAdminControlEntryAn entry in the vrSresAdminControlTable. VrSresAdminControlEntry .1.3.6.1.4.1.3764.1.1.30.100.13.10.1 |
vrSresSnmpAdminStatusThis attribute is used to set the desired state of the interface. The up state
indicates the interface is operational and packet forwarding is allowed.
The down state indicates the interface is not operational and packet
forwarding is unavailable. The testing state indicates that no operational
packets can be passed. Changing this attribute from its default value of
up is not allowed at this time.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.100.13.10.1.1 |
vrSresProvTableThis group contains the provisioned attributes for the
SourceRouteEndStation component. SEQUENCE OF VrSresProvEntry .1.3.6.1.4.1.3764.1.1.30.100.13.11 |
vrSresProvEntryAn entry in the vrSresProvTable. VrSresProvEntry .1.3.6.1.4.1.3764.1.1.30.100.13.11.1 |
vrSresRouteTableNumEntriesThis attribute identifies the maximum number of entries in the
SourceRouteEndStation routing table. Before you change it, check the
network configuration to see how many protocol ports, such as IpPort or
IpxPort, under Vr Pp have endStationSupport set to enable. The value of
routeTableNumEntries also depends on the VirtualRouter attribute
sresMaxHeapSpace.
Consider the following attributes of the SourceRouteEndStation
component when adjusting this number:
- rtEntriesUsed
- rtEntriesFree
- rtEntriesDeniedrw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.100.13.11.1.1 |
vrSresAgingTimeThis attribute specifies the time period used in seconds, to age out
learned entries in the routing table.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.100.13.11.1.2 |
vrSresRouteDescriptorLengthThis attribute indicates the maximum number of route descriptors
supported by this implementation. The maximum number of hops will
be one less because one route descriptor is always required for the
destination. This attribute affects the amount of memory used by the
route entry table. The larger this attribute is, the more memory the route
entry table will use.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.100.13.11.1.3 |
vrSresOperStatusTableThis group includes the Operational Status attribute. This attribute
defines the current operational state of this component. SEQUENCE OF VrSresOperStatusEntry .1.3.6.1.4.1.3764.1.1.30.100.13.12 |
vrSresOperStatusEntryAn entry in the vrSresOperStatusTable. VrSresOperStatusEntry .1.3.6.1.4.1.3764.1.1.30.100.13.12.1 |
vrSresSnmpOperStatusThe current state of the interface. The up state indicates the
interface is operational and capable of forwarding packets. The
down state indicates the interface is not operational, thus unable to
forward packets. testing state indicates that no operational packets
can be passed.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.100.13.12.1.1 |
vrSresStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF VrSresStateEntry .1.3.6.1.4.1.3764.1.1.30.100.13.13 |
vrSresStateEntryAn entry in the vrSresStateTable. VrSresStateEntry .1.3.6.1.4.1.3764.1.1.30.100.13.13.1 |
vrSresAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.100.13.13.1.1 |
vrSresOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.100.13.13.1.2 |
vrSresUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.100.13.13.1.3 |
vrSresOperTableThis group contains the operational attributes for the
SourceRouteEndStation component. SEQUENCE OF VrSresOperEntry .1.3.6.1.4.1.3764.1.1.30.100.13.14 |
vrSresOperEntryAn entry in the vrSresOperTable. VrSresOperEntry .1.3.6.1.4.1.3764.1.1.30.100.13.14.1 |
vrSresRtEntriesUsedThis attribute specifies the total number of SourceRouteEndStation
routing table entries. The value is limited by the attribute
routeTableNumEntries, which is a provisionable attribute. If the value is
consistently approaching the value of routeTableNumEntries, it is
advisable to increase the value provisioned for routeTableNumEntries. It
indicates a potential shortage of routing table entries in the future.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.100.13.14.1.1 |
vrSresRtEntriesFreeThis attribute is indicative of the number of Sres routing table entries
free. A consistently high value for this attribute indicates that there is a
resource surplus here, in terms of the memory requirements of the
routing table. This surplus could be utilized elsewhere if need be. The
value of this attribute is directly influenced by the value of the attribute
routeTableNumEntries.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.100.13.14.1.2 |
vrSresRtEntriesDeniedThis attribute counts the number of times a SourceRouteEndStation
routing table entry was unavailable. Each count indicates an instance of
a new route which could not be learned because of a lack of routing
table entries. A rapid increase indicates a shortage of routing table
entries. To rectify this, increase the number of routing table entries
through the provisioned attribute routeTableNumEntries under the
SourceRouteEndStation component. This counter wraps around its
maximum value of 4294967295.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.100.13.14.1.3 |