Nortel-Magellan-Passport-VirtualRouterMIB
AI MIB Summary
Standard SNMP MIB module defining data structures for Nortel-Magellan-Passport-VirtualRouterMIB.
134
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
134 total| Object Name |
|---|
virtualRouterMIB OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.26 |
IMPORTS Unknown .1.3.6.1.4.1.562.2.4.2.26 |
virtualRouterGroup OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.26.1 |
virtualRouterGroupBE OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.26.1.5 |
virtualRouterGroupBE01 OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.26.1.5.2 |
virtualRouterGroupBE01A OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.26.1.5.2.2 |
virtualRouterCapabilities OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.26.3 |
virtualRouterCapabilitiesBE OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.26.3.5 |
virtualRouterCapabilitiesBE01 OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.26.3.5.2 |
virtualRouterCapabilitiesBE01A OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.26.3.5.2.2 |
vr OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.100 |
vrRowStatusTableThis entry controls the addition and deletion of
vr components. SEQUENCE OF VrRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.100.1 |
vrRowStatusEntryA single entry in the table represents a single
vr component. VrRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.100.1.1 |
vrRowStatusThis variable is used as the basis for SNMP naming of
vr components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.100.1.1.1 |
vrComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.100.1.1.2 |
vrStorageTypeThis variable represents the storage type value for the
vr tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.100.1.1.4 |
vrIndexThis variable represents the index for the vr tables. AsciiStringIndex .1.3.6.1.4.1.3764.1.1.30.100.1.1.10 |
vrMm OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.100.2 |
vrMmRowStatusTableThis entry controls the addition and deletion of
vrMm components. SEQUENCE OF VrMmRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.100.2.1 |
vrMmRowStatusEntryA single entry in the table represents a single
vrMm component. VrMmRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.100.2.1.1 |
vrMmRowStatusThis variable is used as the basis for SNMP naming of
vrMm components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.100.2.1.1.1 |
vrMmComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.100.2.1.1.2 |
vrMmStorageTypeThis variable represents the storage type value for the
vrMm tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.100.2.1.1.4 |
vrMmIndexThis variable represents the index for the vrMm tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.100.2.1.1.10 |
vrMmProvTableThe group includes all provisioned attributes for the
MemoryManagement component. SEQUENCE OF VrMmProvEntry .1.3.6.1.4.1.3764.1.1.30.100.2.10 |
vrMmProvEntryAn entry in the vrMmProvTable. VrMmProvEntry .1.3.6.1.4.1.3764.1.1.30.100.2.10.1 |
vrMmVrMaxHeapSpaceThe maximum percentage of the total system heap space that is
allowed for use by this Virtual Router. Memory allocation for this
VR which attempts to exceed this limit will fail causing a shut down
of the requesting process.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.100.2.10.1.1 |
vrMmIpMaxHeapSpaceThe maximum percentage of this VR's dynamic memory which can be
allocated to this VR's IP. An attempt to allocate memory in excess of
this limit forces IP to shut down.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.100.2.10.1.2 |
vrMmIpxMaxHeapSpaceThe maximum percentage of this VR's dynamic memory which can be
allocated to this VR's IPX. An attempt to allocate memory in excess of
this limit forces IPX to shut down.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.100.2.10.1.3 |
vrMmBridgingMaxHeapSpaceThe maximum percentage of this VR's dynamic memory which can be
allocated to this VR's Bridging. An attempt to allocate memory in
excess of this limit forces Bridging to shut down.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.100.2.10.1.6 |
vrMmNetSentryMaxHeapSpaceThe maximum percentage of this VR's dynamic memory which can be
allocated to this VR's NetSentry. An attempt to allocate memory in
excess of this limit forces NetSentry to shut down.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.100.2.10.1.7 |
vrMmSresMaxHeapSpaceThe maximum percentage of this VR's dynamic memory which can
be allocated to this VR's SourceRouteEndStation. An attempt to
allocate memory in excess of this limit forces
SourceRouteEndStation to shut down.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.100.2.10.1.8 |
vrMmSnaMaxHeapSpaceThe maximum percentage of this VR's dynamic memory which can
be allocated to this VR's SNA. An attempt to allocate memory in
excess of this limit forces SNA to shut down.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.100.2.10.1.9 |
vrMmOperTableThe group includes all operational attributes for the
MemoryManagement component. SEQUENCE OF VrMmOperEntry .1.3.6.1.4.1.3764.1.1.30.100.2.11 |
vrMmOperEntryAn entry in the vrMmOperTable. VrMmOperEntry .1.3.6.1.4.1.3764.1.1.30.100.2.11.1 |
vrMmVrHeapSpaceBytesAllocatedThe number of bytes of system dynamic memory which has been
allocated by this Virtual Router.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.100.2.11.1.1 |
vrMmVrHeapSpaceAllocatedThe percentage of system dynamic memory which is currently allocated
to this Virtual Router.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.100.2.11.1.2 |
vrMmIpHeapSpaceAllocatedThe percentage of this Virtual Router's dynamic memory which is
currently allocated to this Virtual Router's IP.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.100.2.11.1.3 |
vrMmIpxHeapSpaceAllocatedThe percentage of this Virtual Router's dynamic memory which is
currently allocated to this Virtual Router's IPX.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.100.2.11.1.4 |
vrMmBridgingHeapSpaceAllocatedThe percentage of this Virtual Router's dynamic memory which is
currently allocated to this Virtual Router's Bridging.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.100.2.11.1.7 |
vrMmNetSentryHeapSpaceAllocatedThe percentage of this Virtual Router's dynamic memory which is
currently allocated to this Virtual Router's NetSentry.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.100.2.11.1.8 |
vrMmSresHeapSpaceAllocatedThe percentage of this Virtual Router's dynamic memory which is
currently allocated to this Virtual Router's Source Route End Station.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.100.2.11.1.9 |
vrMmSnaHeapSpaceAllocatedThe percentage of this Virtual Router's dynamic memory which is
currently allocated to this Virtual Router's SNA.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.100.2.11.1.10 |
vrPp OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.100.3 |
vrPpRowStatusTableThis entry controls the addition and deletion of
vrPp components. SEQUENCE OF VrPpRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.100.3.1 |
vrPpRowStatusEntryA single entry in the table represents a single
vrPp component. VrPpRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.100.3.1.1 |
vrPpRowStatusThis variable is used as the basis for SNMP naming of
vrPp components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.100.3.1.1.1 |
vrPpComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.100.3.1.1.2 |
vrPpStorageTypeThis variable represents the storage type value for the
vrPp tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.100.3.1.1.4 |
vrPpIndexThis variable represents the index for the vrPp tables. AsciiStringIndex .1.3.6.1.4.1.3764.1.1.30.100.3.1.1.10 |
vrPpAdminControlTableThis group includes the Administrative Control attribute. This
attribute defines the current administrative state of this component. SEQUENCE OF VrPpAdminControlEntry .1.3.6.1.4.1.3764.1.1.30.100.3.100 |
vrPpAdminControlEntryAn entry in the vrPpAdminControlTable. VrPpAdminControlEntry .1.3.6.1.4.1.3764.1.1.30.100.3.100.1 |
vrPpSnmpAdminStatusThe desired state of the interface. The up state indicates the
interface is operational and packet forwarding is allowed. The down
state indicates the interface is not operational and packet forwarding
is unavailable. The testing state indicates that no operational
packets can be passed.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.100.3.100.1.1 |
vrPpProvTableThis group includes provisioned attributes specific to the ProtocolPort
component. SEQUENCE OF VrPpProvEntry .1.3.6.1.4.1.3764.1.1.30.100.3.101 |
vrPpProvEntryAn entry in the vrPpProvTable. VrPpProvEntry .1.3.6.1.4.1.3764.1.1.30.100.3.101.1 |
vrPpLinkToMediaThis attribute defines the Media Application which this Protocol Port is
using as an interface to the network.rw Link .1.3.6.1.4.1.3764.1.1.30.100.3.101.1.1 |
vrPpOperStatusTableThis group includes the Operational Status attribute. This attribute
defines the current operational state of this component. SEQUENCE OF VrPpOperStatusEntry .1.3.6.1.4.1.3764.1.1.30.100.3.102 |
vrPpOperStatusEntryAn entry in the vrPpOperStatusTable. VrPpOperStatusEntry .1.3.6.1.4.1.3764.1.1.30.100.3.102.1 |
vrPpSnmpOperStatusThe current state of the interface. The up state indicates the
interface is operational and capable of forwarding packets. The
down state indicates the interface is not operational, thus unable to
forward packets. testing state indicates that no operational packets
can be passed.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.100.3.102.1.1 |
vrPpStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF VrPpStateEntry .1.3.6.1.4.1.3764.1.1.30.100.3.103 |
vrPpStateEntryAn entry in the vrPpStateTable. VrPpStateEntry .1.3.6.1.4.1.3764.1.1.30.100.3.103.1 |
vrPpAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.100.3.103.1.1 |
vrPpOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.100.3.103.1.2 |
vrPpUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.100.3.103.1.3 |
vrPpOperTableThis group includes operational attributes specific to the ProtocolPort
component. SEQUENCE OF VrPpOperEntry .1.3.6.1.4.1.3764.1.1.30.100.3.104 |
vrPpOperEntryAn entry in the vrPpOperTable. VrPpOperEntry .1.3.6.1.4.1.3764.1.1.30.100.3.104.1 |
vrPpIfIndexThis represents the SNMP ifIndex which is associated with this PP. This
ifIndex can be used to extract detailed information about the PP from
the ifTable.ro InterfaceIndex .1.3.6.1.4.1.3764.1.1.30.100.3.104.1.1 |
vrPpNbmaAddressTableThis group contains the operational attributes of the ProtocolPort
component specific to NHRP. SEQUENCE OF VrPpNbmaAddressEntry .1.3.6.1.4.1.3764.1.1.30.100.3.105 |
vrPpNbmaAddressEntryAn entry in the vrPpNbmaAddressTable. VrPpNbmaAddressEntry .1.3.6.1.4.1.3764.1.1.30.100.3.105.1 |
vrPpAtmAddressThis attribute indicates the ATM address which is associated with
this protocol port. NHRP uses this address to establish shortcut
connections. This attribute is not displayed if NHRP is not
provisioned on this protocol port.ro HexString .1.3.6.1.4.1.3764.1.1.30.100.3.105.1.1 |
vrIfTableEntry OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.100.10 |
vrIfTableEntryRowStatusTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
vrIfTableEntry components. SEQUENCE OF VrIfTableEntryRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.100.10.1 |
vrIfTableEntryRowStatusEntryA single entry in the table represents a single
vrIfTableEntry component. VrIfTableEntryRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.100.10.1.1 |
vrIfTableEntryRowStatusThis variable is used as the basis for SNMP naming of
vrIfTableEntry components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.100.10.1.1.1 |
vrIfTableEntryComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.100.10.1.1.2 |
vrIfTableEntryStorageTypeThis variable represents the storage type value for the
vrIfTableEntry tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.100.10.1.1.4 |
vrIfTableEntryIndexThis variable represents the index for the vrIfTableEntry tables. Integer32 .1.3.6.1.4.1.3764.1.1.30.100.10.1.1.10 |
vrIfTableEntryIftTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group represents the SNMP interface table entry. SEQUENCE OF VrIfTableEntryIftEntry .1.3.6.1.4.1.3764.1.1.30.100.10.10 |
vrIfTableEntryIftEntryAn entry in the vrIfTableEntryIftTable. VrIfTableEntryIftEntry .1.3.6.1.4.1.3764.1.1.30.100.10.10.1 |
vrIfTableEntryIfAdminStatusThe down state indicates the interface is not operational. The testing
state indicates that no operational packets can be passed.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.100.10.10.1.2 |
vrIfTableEntryIfOperStatusThis attribute provides the current operational status of the
interface. The testing state indicates that no operational packets can
be passed.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.100.10.10.1.3 |
vrIfTableEntryIfLastChangeThe value of sysUpTime at the time the interface entered its current
operational state. If the current state was entered prior to the last re-
initialization of the local network management subsystem, then this
object contains a zero value.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.100.10.10.1.4 |
vrIfTableEntryIfInOctetsThe total number of octets received on the interface, including
framing characters.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.100.10.10.1.5 |
vrIfTableEntryIfOutOctetsThe total number of octets transmitted out the interface, including
framing charactersro Counter32 .1.3.6.1.4.1.3764.1.1.30.100.10.10.1.6 |
vrIfTableEntryIfInDiscardsThe number of inbound packets which were chosen to be discarded
even though no errors had been detected to prevent their being
deliverable to a higher layer protocol. One possible reason for
discarding such a packet could be to free up buffer space.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.100.10.10.1.7 |
vrIfTableEntryIfOutDiscardsThe number of outbound packets which were chosen to be
discarded even though no errors had been detected to prevent their
being transmitted. One possible reason for discarding such a packet
could be to free up buffer space.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.100.10.10.1.8 |
vrIfTableEntryIfInErrorsThe number of inbound packet that contained errors preventing
them from being deliverable to a higher layer protocol.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.100.10.10.1.9 |
vrIfTableEntryIfOutErrorsThe number of outbound packets that could not be transmitted because
of errors.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.100.10.10.1.10 |
vrIfTableEntryIfInUcastPktsThe number of subnetwork-unicast packets delivered to a higher-layer
protocol.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.100.10.10.1.11 |
vrIfTableEntryIfOutUcastPktsThe total number of packets that higher level protocols requested be
transmitted to a subnetwork-unicast address, including those that
were discarded or not sent.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.100.10.10.1.12 |
vrIfTableEntryIfInNuCastPktsThe number of non-unicast (i.e., subnetwork- broadcast or
subnetwork-multicast) packets delivered to a higher-layer protocol.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.100.10.10.1.13 |
vrIfTableEntryIfOutNuCastPktsThe total number of packets that higher level protocols request be
transmitted to a non-unicast address, including those that were
discarded or not sent.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.100.10.10.1.14 |
vrIfTableEntryIfInUnknownProtosThe number of packets received via the interface which were
discarded because of an unknown or unsupported protocol.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.100.10.10.1.15 |
vrIfTableEntryIfOutQlengthThe length of the output packet queue (in packets)ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.100.10.10.1.16 |
vrIfTableEntryIfDescriptionA textual string containing information about the interface. This
string includes the name of the manufacturer, the product name and
the version of the hardware interface.ro AsciiString .1.3.6.1.4.1.3764.1.1.30.100.10.10.1.17 |
vrIfTableEntryIfTypeThe type of interface, distinguished according to the physical/link
protocol(s) immediately below the network layer in the protocol
stackro Enumeration .1.3.6.1.4.1.3764.1.1.30.100.10.10.1.18 |
vrIfTableEntryIfMtuThe size of the largest datagram which can be sent/received on the
interface, specified in octets. For interfaces that are used for
transmitting network datagrams, this is the size of the largest
network datagram that can be sent on the interface.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.100.10.10.1.19 |
vrIfTableEntryIfSpeedAn estimate of the interface's current bandwidth in bits per second.
For interfaces which do not vary in bandwidth or for those where no
accurate estimation can be made, this object should contain the
nominal bandwidth.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.100.10.10.1.20 |
vrIfTableEntryIfPhysicalAddressThe interface's address at the protocol layer immediately `below' the
network layer in the protocol stack. For interfaces which do not
have such an address (e.g., a serial line), this object should be an
octet string of zero length.ro AsciiString .1.3.6.1.4.1.3764.1.1.30.100.10.10.1.21 |
vrIfTableEntryIfSpecificA reference to MIB definitions specific to the particular media
being used to realize the interface. For example, if the interface is
realized by an ethernet, then the value of this object refers to a
document defining objects specific to ethernet. If this information is
not present, its value should be set to the OBJECT IDENTIFIER
0.0, which is a syntactically valid object identifier, and any
conformant implementation of ASN.1 and BER must be able to
generate and recognize this value.ro IntegerSequence .1.3.6.1.4.1.3764.1.1.30.100.10.10.1.22 |
vrIfTableEntryAdditionalInfoTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group contains additional information associated with this
ifEntry. SEQUENCE OF VrIfTableEntryAdditionalInfoEntry .1.3.6.1.4.1.3764.1.1.30.100.10.11 |
vrIfTableEntryAdditionalInfoEntryAn entry in the vrIfTableEntryAdditionalInfoTable. VrIfTableEntryAdditionalInfoEntry .1.3.6.1.4.1.3764.1.1.30.100.10.11.1 |
vrIfTableEntryStdComponentNameThis attribute provides a component name associated with this
ifEntry. This component is the source of the data stored in this
entry. More data may be determined about this entry by looking at
the component associated with this component name.ro RowPointer .1.3.6.1.4.1.3764.1.1.30.100.10.11.1.1 |
vrQosP OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.100.15 |
vrQosPRowStatusTableThis entry controls the addition and deletion of
vrQosP components. SEQUENCE OF VrQosPRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.100.15.1 |
vrQosPRowStatusEntryA single entry in the table represents a single
vrQosP component. VrQosPRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.100.15.1.1 |
vrQosPRowStatusThis variable is used as the basis for SNMP naming of
vrQosP components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.100.15.1.1.1 |
vrQosPComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.100.15.1.1.2 |
vrQosPStorageTypeThis variable represents the storage type value for the
vrQosP tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.100.15.1.1.4 |
vrQosPIndexThis variable represents the index for the vrQosP tables. Integer32 .1.3.6.1.4.1.3764.1.1.30.100.15.1.1.10 |
vrQosPProvTableThis group includes all attributes that can be provisioned to define an
InwQualityofServiceProfile instance. SEQUENCE OF VrQosPProvEntry .1.3.6.1.4.1.3764.1.1.30.100.15.10 |
vrQosPProvEntryAn entry in the vrQosPProvTable. VrQosPProvEntry .1.3.6.1.4.1.3764.1.1.30.100.15.10.1 |
vrQosPVnsDiscardPriorityThis attribute specifies the throughput importance of the packets when
forwarded over VNS connections. In times of congestion the discard
priority of a packet is used to determine whether the packet should be
discarded to reduce the heavy traffic load. Packets with lower discard
priority (numerically higher vdp) are more likely to be discarded than
packets with higher discard priority (numerically lower vdp). Discard
priority one (vdp 1) should be used for the most important traffic,
whereas discard priority three (vdp 3) should be used for the least
important traffic.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.100.15.10.1.1 |
vrQosPVnsEmissionPriorityThis attribute specifies the delay importance of the packets when
forwarded over VNS connections. Packets with higher emission
priority (vep 1) are transmitted before packets with lower emission
priority (vep 2). Delay sensitive packets should be sent with
emission priority one (vep 1).rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.100.15.10.1.2 |
vrQosPWanEmissionPriorityThis attribute specifies the delay importance of the packets when
forwarded over WAN connections. Packets with higher emission
priority (wep 1) are transmitted before packets with lower emission
priority (wep 2). Delay sensitive packets should be sent with
emission priority one (wep 1). This attribute has been obsoleted and
is replaced by emissionPriority attribute under Vr/n Ip Pg/n
CosTreatment/n component.rwobsolete Unsigned32 .1.3.6.1.4.1.3764.1.1.30.100.15.10.1.3 |
vrAdminContorlTableThis group includes the Administrative Control attribute. This
attribute defines the current administrative state of this component. SEQUENCE OF VrAdminContorlEntry .1.3.6.1.4.1.3764.1.1.30.100.100 |
vrAdminContorlEntryAn entry in the vrAdminContorlTable. VrAdminContorlEntry .1.3.6.1.4.1.3764.1.1.30.100.100.1 |
vrSnmpAdminStatusThis sets the desired state of this VirtualRouter. The up state
indicates the Vr is operational. The down state indicates the Vr is
not operational.
The down state is only valid when the managementAccess attribute
is disabled. Testing is an invalid state for the Vr.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.100.100.1.1 |
vrManagementAccessThis attributes defines the routing capabilities of this Virtual Router
and controls the tcp access into that Vr.
External access is only permitted through the Vr that has this
attribute enabled.
The attribute allows the following subcomponents to be
provisioned: Ipx, Bridging, Sna, Sres, NetSentry, and Snmp.
Exactly one Vr must have this attribute enabled.
The first provisioned Vr will have the attribute enabled by default.
Subsequent Vrs will have the attribute disabled.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.100.100.1.2 |
vrVirtualPrivateIntranetIdentifierIdentifies the Virtual Private Intranet (VPI) associated with this
Virtual Router. The vpiId must be unique for each VR on a
Passport and ach interconnected VR must have the same vpiId.rw INTEGER .1.3.6.1.4.1.3764.1.1.30.100.100.1.3 |
vrCidDataTableThis group contains the attribute for a component's Customer
Identifier (CID). Refer to the attribute description for a detailed
explanation of CIDs. SEQUENCE OF VrCidDataEntry .1.3.6.1.4.1.3764.1.1.30.100.101 |
vrCidDataEntryAn entry in the vrCidDataTable. VrCidDataEntry .1.3.6.1.4.1.3764.1.1.30.100.101.1 |
vrCustomerIdentifierThis attribute holds the Customer Identifier (CID).
Every component has a CID. If a component has a cid attribute, the
component's CID is the provisioned value of that attribute;
otherwise the component inherits the CID of its parent. The top-
level component has a CID of 0.
Every operator session also has a CID, which is the CID
provisioned for the operator's user ID. An operator will see only the
stream data for components having a matching CID. Also, the
operator will be allowed to issue commands for only those
components which have a matching CID.
An operator CID of 0 is used to identify the Network Manager
(referred to as 'NetMan' in DPN). This CID matches the CID of
any component. Values 1 to 8191 inclusive (equivalent to 'basic
CIDs' in DPN) may be assigned to specific customers.rw Unsigned32 (0 | 1..8191) .1.3.6.1.4.1.3764.1.1.30.100.101.1.1 |
vrOperStatusTableThis group includes the Operational Status attribute. This attribute
defines the current operational state of this component. SEQUENCE OF VrOperStatusEntry .1.3.6.1.4.1.3764.1.1.30.100.103 |
vrOperStatusEntryAn entry in the vrOperStatusTable. VrOperStatusEntry .1.3.6.1.4.1.3764.1.1.30.100.103.1 |
vrSnmpOperStatusThe current state of the interface. The up state indicates the
interface is operational and capable of forwarding packets. The
down state indicates the interface is not operational, thus unable to
forward packets. testing state indicates that no operational packets
can be passed.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.100.103.1.1 |
vrStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF VrStateEntry .1.3.6.1.4.1.3764.1.1.30.100.104 |
vrStateEntryAn entry in the vrStateTable. VrStateEntry .1.3.6.1.4.1.3764.1.1.30.100.104.1 |
vrAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.100.104.1.1 |
vrOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.100.104.1.2 |
vrUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.100.104.1.3 |
vrIfNumberOperTableThis group contains the ifNumber attribute. SEQUENCE OF VrIfNumberOperEntry .1.3.6.1.4.1.3764.1.1.30.100.105 |
vrIfNumberOperEntryAn entry in the vrIfNumberOperTable. VrIfNumberOperEntry .1.3.6.1.4.1.3764.1.1.30.100.105.1 |
vrIfNumberThis attribute defines the number of IfEntries in the IfTable.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.100.105.1.1 |