Nortel-Magellan-Passport-ModAtmQosMIB
AI MIB Summary
Standard SNMP MIB module defining data structures for Nortel-Magellan-Passport-ModAtmQosMIB.
34
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
34 total| Object Name |
|---|
modAtmQosMIB OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.75 |
IMPORTS Unknown .1.3.6.1.4.1.562.2.4.2.75 |
modAtmQosGroup OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.75.1 |
modAtmQosGroupBE OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.75.1.5 |
modAtmQosGroupBE01 OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.75.1.5.2 |
modAtmQosGroupBE01A OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.75.1.5.2.2 |
modAtmQosCapabilities OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.75.3 |
modAtmQosCapabilitiesBE OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.75.3.5 |
modAtmQosCapabilitiesBE01 OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.75.3.5.2 |
modAtmQosCapabilitiesBE01A OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.75.3.5.2.2 |
modFrsAtmNet OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.16.3.2 |
modFrsAtmNetRowStatusTableThis entry controls the addition and deletion of
modFrsAtmNet components. SEQUENCE OF ModFrsAtmNetRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.16.3.2.1 |
modFrsAtmNetRowStatusEntryA single entry in the table represents a single
modFrsAtmNet component. ModFrsAtmNetRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.16.3.2.1.1 |
modFrsAtmNetRowStatusThis variable is used as the basis for SNMP naming of
modFrsAtmNet components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.16.3.2.1.1.1 |
modFrsAtmNetComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.16.3.2.1.1.2 |
modFrsAtmNetStorageTypeThis variable represents the storage type value for the
modFrsAtmNet tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.16.3.2.1.1.4 |
modFrsAtmNetIndexThis variable represents the index for the modFrsAtmNet tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.16.3.2.1.1.10 |
modFrsAtmNetTpm OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.16.3.2.2 |
modFrsAtmNetTpmRowStatusTableThis entry controls the addition and deletion of
modFrsAtmNetTpm components. SEQUENCE OF ModFrsAtmNetTpmRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.16.3.2.2.1 |
modFrsAtmNetTpmRowStatusEntryA single entry in the table represents a single
modFrsAtmNetTpm component. ModFrsAtmNetTpmRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.16.3.2.2.1.1 |
modFrsAtmNetTpmRowStatusThis variable is used as the basis for SNMP naming of
modFrsAtmNetTpm components.
These components can be added.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.16.3.2.2.1.1.1 |
modFrsAtmNetTpmComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.16.3.2.2.1.1.2 |
modFrsAtmNetTpmStorageTypeThis variable represents the storage type value for the
modFrsAtmNetTpm tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.16.3.2.2.1.1.4 |
modFrsAtmNetTpmIndexThis variable represents the index for the modFrsAtmNetTpm tables. Integer32 .1.3.6.1.4.1.3764.1.1.30.16.3.2.2.1.1.10 |
modFrsAtmNetTpmProvTableThis group specifies the mapping from Frame Relay parameters to
ATM parameters for a Frame Relay using the defined transfer
priority. SEQUENCE OF ModFrsAtmNetTpmProvEntry .1.3.6.1.4.1.3764.1.1.30.16.3.2.2.2 |
modFrsAtmNetTpmProvEntryAn entry in the modFrsAtmNetTpmProvTable. ModFrsAtmNetTpmProvEntry .1.3.6.1.4.1.3764.1.1.30.16.3.2.2.2.1 |
modFrsAtmNetTpmEmissionPriorityThis attribute specifies the egress emission priority at the FR to
ATM interface. A value of 3 specifies the highest priority, whereas a
value of 0 specifies the lowest priority.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.16.3.2.2.2.1.1 |
modFrsAtmNetTpmAtmServiceCategoryThis attribute specifies the ATM class of service value to be used on
a transport connection.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.16.3.2.2.2.1.2 |
modFrsAtmNetTpmAvgFrameSizeThis attribute specifies the average frame size that is used in the
traffic parameter conversion policy calculations for this transfer
priority to determine the overhead factor for FR to ATM
interworking. The overhead factor affects the granularity of the
bandwidth requirements. The values should be identical across the
network. Otherwise, there may result in bandwidth conversion
inconsistencies.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.16.3.2.2.2.1.3 |
modFrsAtmNetTpmTrafficParmConversionPolicyThis attribute specifies the traffic parameter conversion policy to use
for this transfer priority to specify the equivalent bandwidth rate at
the FrAtm interface.
Policy 3 characterizes the traffic in the following way:
- ATM traffic descriptor type 6 is selected
- PCR0+1 is based on the AR
- SCR0+1 is based on the CIR and EIR
- MBS0+1 is based on Bc,Be,CIR,EIR and AR
- Takes into account that the instananeous rate of the frame relay
stream can burst above CIR and up tp the AR.
Policy 4 characterizes the traffic in the following way:
- ATM traffic descriptor type 7 or 8 is selected. Type 7 is chosen
when non-conforming cells are to be discarded and type 8 when
non-conforming cells are tagged by UPC traffic policer.
- PCR0+1 is based on the AR
- SCR0 is based on the CIR
- MBS0 is based on Bc,CIR and AR
- There is no direct characterization of EIR. The allowed EIR can be
derived using the difference between the AR and CIR.
Policy 5 characterizes the traffic in the following way:
- ATM traffic descriptor type 7 or 8 is selected . Type 7 is chosen
when non-conforming cells are to be discarded and type 8 when
non-conforming cells are tagged by UPC traffic policer
- PCR0+1 is based on CIR and EIR
- SCR0 is based on the CIR
- MBS0 is based on the Bc,CIR and AR
- The maximum PCR is no longer based on AR but based on the
CIR and EIR.
Policy 6 characterizes the traffic in the following way:
- ATM traffic descriptor type 3 is selected
- PCR0+1 is based only on CIR.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.16.3.2.2.2.1.4 |
modFrsAtmNetTpmAssignedBandwidthPoolThis attribute specifies the bandwidth pool which is used to support
this transfer priority. The bandwidth pool is defined in the frAtm Ca
component.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.16.3.2.2.2.1.5 |
modFrsAtmNetProvTableThis group contains information related to the Frame Relay to ATM
interworking. SEQUENCE OF ModFrsAtmNetProvEntry .1.3.6.1.4.1.3764.1.1.30.16.3.2.10 |
modFrsAtmNetProvEntryAn entry in the modFrsAtmNetProvTable. ModFrsAtmNetProvEntry .1.3.6.1.4.1.3764.1.1.30.16.3.2.10.1 |
modFrsAtmNetRetryTimerPeriodThis attribute specifies the module wide retry timer interval for
failed SPVC calls using Frame Relay to ATM Networking. Changes
to this attribute will take effect on subsequent call setups.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.16.3.2.10.1.1 |