Nortel-Magellan-Passport-ShelfMIB
AI MIB Summary
Standard SNMP MIB module defining data structures for Nortel-Magellan-Passport-ShelfMIB.
348
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
348 total| Object Name |
|---|
shelfMIB OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.12 |
IMPORTS Unknown .1.3.6.1.4.1.562.2.4.2.12 |
shelfGroup OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.12.1 |
shelfGroupBE OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.12.1.5 |
shelfGroupBE01 OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.12.1.5.2 |
shelfGroupBE01A OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.12.1.5.2.2 |
shelfCapabilities OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.12.3 |
shelfCapabilitiesBE OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.12.3.5 |
shelfCapabilitiesBE01 OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.12.3.5.2 |
shelfCapabilitiesBE01A OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.12.3.5.2.2 |
shelf OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.13 |
shelfRowStatusTableThis entry controls the addition and deletion of
shelf components. SEQUENCE OF ShelfRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.13.1 |
shelfRowStatusEntryA single entry in the table represents a single
shelf component. ShelfRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.13.1.1 |
shelfRowStatusThis variable is used as the basis for SNMP naming of
shelf components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.13.1.1.1 |
shelfComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.13.1.1.2 |
shelfStorageTypeThis variable represents the storage type value for the
shelf tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.13.1.1.4 |
shelfIndexThis variable represents the index for the shelf tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.13.1.1.10 |
shelfCard OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.13.2 |
shelfCardRowStatusTableThis entry controls the addition and deletion of
shelfCard components. SEQUENCE OF ShelfCardRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.13.2.1 |
shelfCardRowStatusEntryA single entry in the table represents a single
shelfCard component. ShelfCardRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.13.2.1.1 |
shelfCardRowStatusThis variable is used as the basis for SNMP naming of
shelfCard components.
These components can be added.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.13.2.1.1.1 |
shelfCardComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.13.2.1.1.2 |
shelfCardStorageTypeThis variable represents the storage type value for the
shelfCard tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.13.2.1.1.4 |
shelfCardIndexThis variable represents the index for the shelfCard tables. Integer32 .1.3.6.1.4.1.3764.1.1.30.13.2.1.1.10 |
shelfCardBusTap OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.13.2.2 |
shelfCardBusTapRowStatusTableThis entry controls the addition and deletion of
shelfCardBusTap components. SEQUENCE OF ShelfCardBusTapRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.13.2.2.1 |
shelfCardBusTapRowStatusEntryA single entry in the table represents a single
shelfCardBusTap component. ShelfCardBusTapRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.13.2.2.1.1 |
shelfCardBusTapRowStatusThis variable is used as the basis for SNMP naming of
shelfCardBusTap components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.13.2.2.1.1.1 |
shelfCardBusTapComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.13.2.2.1.1.2 |
shelfCardBusTapStorageTypeThis variable represents the storage type value for the
shelfCardBusTap tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.13.2.2.1.1.4 |
shelfCardBusTapIndexThis variable represents the index for the shelfCardBusTap tables. Enumeration .1.3.6.1.4.1.3764.1.1.30.13.2.2.1.1.10 |
shelfCardBusTapStateTableThis group contains the three OSI State attributes and the six OSI
Status attributes. The descriptions generically indicate what each
attribute implies about the component. Note that not all the values
and state combinations described here are supported by every
component which uses this group. For component-specific
information and the valid state combinations, refer to NTP 241-
7001-150, Passport Operations and Maintenance Guide. SEQUENCE OF ShelfCardBusTapStateEntry .1.3.6.1.4.1.3764.1.1.30.13.2.2.10 |
shelfCardBusTapStateEntryAn entry in the shelfCardBusTapStateTable. ShelfCardBusTapStateEntry .1.3.6.1.4.1.3764.1.1.30.13.2.2.10.1 |
shelfCardBusTapAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.13.2.2.10.1.1 |
shelfCardBusTapOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.13.2.2.10.1.2 |
shelfCardBusTapUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.13.2.2.10.1.3 |
shelfCardBusTapAvailabilityStatusIf supported by the component, this attribute indicates the OSI
Availability status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value inTest indicates that the resource is undergoing a test
procedure. If adminState is locked or shuttingDown, the normal
users are precluded from using the resource and controlStatus is
reservedForTest. Tests that do not exclude additional users can be
present in any operational or administrative state but the
reservedForTest condition should not be present.
The value failed indicates that the component has an internal fault
that prevents it from operating. The operationalState is disabled.
The value dependency indicates that the component cannot operate
because some other resource on which it depends is unavailable.
The operationalState is disabled.
The value powerOff indicates the resource requires power to be
applied and it is not powered on. The operationalState is disabled.
The value offLine indicates the resource requires a routine
operation (either manual, automatic, or both) to be performed to
place it on-line and make it available for use. The operationalState
is disabled.
The value offDuty indicates the resource is inactive in accordance
with a predetermined time schedule. In the absence of other
disabling conditions, the operationalState is enabled or disabled.
The value degraded indicates the service provided by the
component is degraded in some way, such as in speed or operating
capacity. However, the resource remains available for service. The
operationalState is enabled.
The value notInstalled indicates the resource is not present. The
operationalState is disabled.
The value logFull is not used.
Description of bits:
inTest(0)
failed(1)
powerOff(2)
offLine(3)
offDuty(4)
dependency(5)
degraded(6)
notInstalled(7)
logFull(8)ro OCTET STRING .1.3.6.1.4.1.3764.1.1.30.13.2.2.10.1.4 |
shelfCardBusTapProceduralStatusIf supported by the component, this attribute indicates the OSI
Procedural status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value initializationRequired indicates (for a resource which
doesn't initialize autonomously) that initialization is required before
it can perform its normal functions, and this procedure has not been
initiated. The operationalState is disabled.
The value notInitialized indicates (for a resource which does
initialize autonomously) that initialization is required before it can
perform its normal functions, and this procedure has not been
initiated. The operationalState may be enabled or disabled.
The value initializing indicates that initialization has been initiated
but is not yet complete. The operationalState may be enabled or
disabled.
The value reporting indicates the resource has completed some
processing operation and is notifying the results. The
operationalState is enabled.
The value terminating indicates the component is in a termination
phase. If the resource doesn't reinitialize autonomously,
operationalState is disabled; otherwise it is enabled or disabled.
Description of bits:
initializationRequired(0)
notInitialized(1)
initializing(2)
reporting(3)
terminating(4)ro OCTET STRING .1.3.6.1.4.1.3764.1.1.30.13.2.2.10.1.5 |
shelfCardBusTapControlStatusIf supported by the component, this attribute indicates the OSI
Control status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value subjectToTest indicates the resource is available but tests
may be conducted simultaneously at unpredictable times, which
may cause it to exhibit unusual characteristics.
The value partOfServicesLocked indicates that part of the service is
restricted from users of a resource. The adminState is unlocked.
The value reservedForTest indicates that the component is
administratively unavailable because it is undergoing a test
procedure. The adminState is locked.
The value suspended indicates that the service has been
administratively suspended.
Description of bits:
subjectToTest(0)
partOfServicesLocked(1)
reservedForTest(2)
suspended(3)ro OCTET STRING .1.3.6.1.4.1.3764.1.1.30.13.2.2.10.1.6 |
shelfCardBusTapAlarmStatusIf supported by the component, this attribute indicates the OSI
Alarm status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value underRepair indicates the component is currently being
repaired. The operationalState is enabled or disabled.
The value critical indicates one or more critical alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value major indicates one or more major alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value minor indicates one or more minor alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value alarmOutstanding generically indicates that an alarm of
some severity is outstanding against the component.
Description of bits:
underRepair(0)
critical(1)
major(2)
minor(3)
alarmOutstanding(4)ro OCTET STRING .1.3.6.1.4.1.3764.1.1.30.13.2.2.10.1.7 |
shelfCardBusTapStandbyStatusIf supported by the component, this attribute indicates the OSI
Standby status of the component.
The value notSet indicates that either the attribute is not supported
or that none of the status conditions described below are present.
Note that this is a non-standard value, used because the original
specification indicated this attribute was set-valued and thus, did not
provide a value to indicate that none of the other three are
applicable.
The value hotStandby indicates that the resource is not providing
service but will be immediately able to take over the role of the
resource to be backed up, without initialization activity, and
containing the same information as the resource to be backed up.
The value coldStandby indicates the resource is a backup for
another resource but will not be immediately able to take over the
role of the backed up resource and will require some initialization
activity.
The value providingService indicates that this component, as a
backup resource, is currently backing up another resource.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.13.2.2.10.1.8 |
shelfCardBusTapUnknownStatusThis attribute indicates the OSI Unknown status of the component.
The value false indicates that all of the other OSI State and Status
attribute values can be considered accurate.
The value true indicates that the actual state of the component is not
known for sure.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.13.2.2.10.1.9 |
shelfCardBusTapOperTableThis attribute group contains operational attributes of a bus tap. This
information outlines what the bus tap is doing and why it is doing it,
and is primarily intended for use in diagnosing the cause of a bus-
related problem reported by the module. SEQUENCE OF ShelfCardBusTapOperEntry .1.3.6.1.4.1.3764.1.1.30.13.2.2.11 |
shelfCardBusTapOperEntryAn entry in the shelfCardBusTapOperTable. ShelfCardBusTapOperEntry .1.3.6.1.4.1.3764.1.1.30.13.2.2.11.1 |
shelfCardBusTapFailuresInEffectThis attribute records the hardware problems that prevent the bus
tap from using the associated bus. It may contain any combination
of the following values.
selfTest: the bus tap has failed its self-test
clockSignal: the bus tap is not receiving clock signals from the bus
parityError: the bus tap has detected too many parity errors on the
bus
Description of bits:
selfTest(0)
clockSignal(1)
parityError(2)ro OCTET STRING .1.3.6.1.4.1.3764.1.1.30.13.2.2.11.1.1 |
shelfCardBusTapDependenciesInEffectThis attribute records the non-hardware problems that prevent the
bus tap from using the associated bus. It may contain any
combination of the following values.
busLocked: the bus is locked
busDisabled: the bus is disabled
Description of bits:
busLocked(0)
busDisabled(1)ro OCTET STRING .1.3.6.1.4.1.3764.1.1.30.13.2.2.11.1.2 |
shelfCardBusTapCardsAvailableThis attribute records the slot numbers of the cards that the bus tap
considers available on the busthat is, the cards that have an
operational bus tap connected to the bus. The value of this attribute
is determined automatically by the bus tap by monitoring signals
generated by each bus tap on the bus; it cannot be changed by the
operator. Normally, every card in the module signals its availability
on both buses; if a card does not signal its availability on a bus this
indicates that the card is not present or that its bus tap has failed. By
examining this attribute for both of a card's BusTap components, it
is possible to determine which cards are present in the module and
which buses each can use.
Note: If failuresInEffect contains either selfTest or clockSignal the
bus tap is unable to monitor the availability of the bus taps on the
bus; cardsAvailable will indicate that no bus taps are available on
the bus.
Description of bits:
n0(0)
n1(1)
n2(2)
n3(3)
n4(4)
n5(5)
n6(6)
n7(7)
n8(8)
n9(9)
n10(10)
n11(11)
n12(12)
n13(13)
n14(14)
n15(15)ro OCTET STRING .1.3.6.1.4.1.3764.1.1.30.13.2.2.11.1.3 |
shelfCardBusTapCardsTxToThis attribute records the slot numbers of the cards which the bus
tap is currently configured to transmit cells to. This configuration is
managed automatically, and cannot be changed by the operator. By
examining this attribute for both of a card's BusTap components, it
is possible to determine which bus (if any) the card uses when it
needs to transmits cells to a specific card in the module.
Description of bits:
n0(0)
n1(1)
n2(2)
n3(3)
n4(4)
n5(5)
n6(6)
n7(7)
n8(8)
n9(9)
n10(10)
n11(11)
n12(12)
n13(13)
n14(14)
n15(15)ro OCTET STRING .1.3.6.1.4.1.3764.1.1.30.13.2.2.11.1.4 |
shelfCardBusTapErrorsTableThis attribute group records errors that the bus tap has detected
since the card was last rebooted. This information is intended for
use in detecting and diagnosing bus-related problems within a
module. SEQUENCE OF ShelfCardBusTapErrorsEntry .1.3.6.1.4.1.3764.1.1.30.13.2.2.12 |
shelfCardBusTapErrorsEntryAn entry in the shelfCardBusTapErrorsTable. ShelfCardBusTapErrorsEntry .1.3.6.1.4.1.3764.1.1.30.13.2.2.12.1 |
shelfCardBusTapSelfTestErrorCodeThis attribute records the error code generated by the most recent
self-test of the bus tap. The value zero indicates that the self-test
was successful. A non-zero value indicates that the self-test failed,
and is used by the service technician when a defective card is
returned for repair.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.13.2.2.12.1.1 |
shelfCardBusTapClockErrorsThis attribute records the number of times that the bus tap has
detected a loss of the fundamental clock signal used by the bus.
Each occurrence may result in the loss of one or more cells or
frames. This type of event may occur during normal operation of
the module, for example when switching from one of the bus's
clock sources to the other; it may also be caused by a hardware
fault.
The attribute's value wraps around to zero when it exceeds the
maximum permitted value.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.13.2.2.12.1.2 |
shelfCardBusTapEndOfCellErrorsThis attribute records the number of times that the bus tap has
detected a loss of the end-of-cell timing signal used by the bus.
Each occurrence may result in the loss of one or more cells or
frames. This type of event may occur during normal operation of
the module, for example switching the bus's clock source from one
card to another; it may also be caused by a hardware fault.
The attribute's value wraps around to zero when it exceeds the
maximum permitted value.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.13.2.2.12.1.3 |
shelfCardBusTapParityErrorsThis attribute records the number of times that the bus tap has
detected a cell with invalid parity on the bus. Each occurrence may
result in the loss of one or more cells or frames. This type of event
may occur during normal operation of the module, for example
when a card is inserted, removed, or reboots; it may also be caused
by a hardware fault.
The attribute's value wraps around to zero when it exceeds the
maximum permitted value.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.13.2.2.12.1.4 |
shelfCardBusTapFrmCongestionErrorsThis attribute records the number of times that the bus tap was
unable to receive a frame from the bus because all of its bus receive
channels were in use. Each occurrence results in the loss of the
frame. This type of event may occur during normal operation of the
module, for example when the module is operating in single bus
mode; it may also be caused by a hardware fault.
The attribute's value wraps around to zero when it exceeds the
maximum permitted value.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.13.2.2.12.1.5 |
shelfCardBusTapFrmCollisionErrorsThis attribute records the number of times that the bus tap was
unable to receive a frame from the bus because it did not receive the
last cell of the frame before the first cell of the following frame
from the same source. Each occurrence results in the loss of both
frames. This type of event may occur during normal operation of
the module, for example when a card reboots; it may also be caused
by a hardware fault.
The attribute's value wraps around to zero when it exceeds the
maximum permitted value.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.13.2.2.12.1.6 |
shelfCardBusTapFrmTimeoutErrorsThis attribute records the number of times that the bus tap was
unable to receive a frame from the bus because the delay between
two successive cells in that frame exceeded the maximum allowable
duration. Each occurrence results in the loss of the frame. This type
of event may occur during normal operation of the module, for
example when the module changes bus mode; it may also be caused
by a hardware fault.
The attribute's value wraps around to zero when it exceeds the
maximum permitted value.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.13.2.2.12.1.7 |
shelfCardBusTapFrmDeliveryErrorsThis attribute records the number of times that the bus tap was
unable to receive a frame from the bus because it was destined for a
bus transmit queue; that is, the frame would have been immediately
retransmitted over a bus. Each occurrence results in the loss of the
frame. This type of event should never occur during normal
operation of the module and indicates the occurrence of a hardware
or software fault.
The attribute's value wraps around to zero when it exceeds the
maximum permitted value.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.13.2.2.12.1.8 |
shelfCardBusTapFrmSizeErrorsThis attribute records the number of times that the bus tap was
unable to receive a frame from the bus because it required more
than 255 blocks of shared memory. Each occurrence results in the
loss of the frame. This type of event should never occur during
normal operation of the module and indicates improper
configuration of the card or the occurrence of a hardware or
software fault.
The attribute's value wraps around to zero when it exceeds the
maximum permitted value.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.13.2.2.12.1.9 |
shelfCardTest OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.13.2.3 |
shelfCardTestRowStatusTableThis entry controls the addition and deletion of
shelfCardTest components. SEQUENCE OF ShelfCardTestRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.13.2.3.1 |
shelfCardTestRowStatusEntryA single entry in the table represents a single
shelfCardTest component. ShelfCardTestRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.13.2.3.1.1 |
shelfCardTestRowStatusThis variable is used as the basis for SNMP naming of
shelfCardTest components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.13.2.3.1.1.1 |
shelfCardTestComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.13.2.3.1.1.2 |
shelfCardTestStorageTypeThis variable represents the storage type value for the
shelfCardTest tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.13.2.3.1.1.4 |
shelfCardTestIndexThis variable represents the index for the shelfCardTest tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.13.2.3.1.1.10 |
shelfCardTestStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF ShelfCardTestStateEntry .1.3.6.1.4.1.3764.1.1.30.13.2.3.10 |
shelfCardTestStateEntryAn entry in the shelfCardTestStateTable. ShelfCardTestStateEntry .1.3.6.1.4.1.3764.1.1.30.13.2.3.10.1 |
shelfCardTestAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.13.2.3.10.1.1 |
shelfCardTestOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.13.2.3.10.1.2 |
shelfCardTestUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.13.2.3.10.1.3 |
shelfCardTestSetupTableThis attribute group contains the attributes that govern the operation
of a card test. These attributes cannot be changed while a card test
is running. SEQUENCE OF ShelfCardTestSetupEntry .1.3.6.1.4.1.3764.1.1.30.13.2.3.11 |
shelfCardTestSetupEntryAn entry in the shelfCardTestSetupTable. ShelfCardTestSetupEntry .1.3.6.1.4.1.3764.1.1.30.13.2.3.11.1 |
shelfCardTestTargetCardThis attribute specifies the slot number of the card to which frames
are sent during the card test. There is no single default value for this
attributeit defaults to the slot number of the Test component's
own card and must be changed to a different value before the test
can be started.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.13.2.3.11.1.1 |
shelfCardTestFrmTypesThis attribute specifies the types of frames that are sent during the
card test. It must contain at least one of the following values.
loading: A set of 'loading frames' is circulated between the Test
component and the Test component on the target card as rapidly as
possible. This frame type should be selected when the test is
intended to verify the operation of the cards and the backplane
buses under a specified load.
verification: A single 'verification frame' is transmitted to the Test
component on the target card; when the frame is returned, its
contents are verified and the next verification frame in the series is
transmitted. This frame type should be selected when the test is
intended to verify that frames are not being corrupted as they pass
from card to card.
Description of bits:
loading(0)
verification(1)rw OCTET STRING .1.3.6.1.4.1.3764.1.1.30.13.2.3.11.1.2 |
shelfCardTestFrmPrioritiesThis attribute specifies the priorities of the frames that are sent
during the card test. It must contain at least one of the following
values.
low: Low priority frames are sent.
high: High priority frames are sent.
Description of bits:
lowPriority(0)
highPriority(1)rw OCTET STRING .1.3.6.1.4.1.3764.1.1.30.13.2.3.11.1.3 |
shelfCardTestFrmPatternTypeThis attribute specifies the bit sequence used to fill the frames used
in the card test. It must contain one of the following values.
ccitt32kBitPattern: a pseudo-random sequence of 32 Kbit is used
ccitt8MBitPattern: a pseudo-random sequence of 8 Mbit is used
customizedPattern: the pattern defined by the customizedPattern
attribute is usedrw Enumeration .1.3.6.1.4.1.3764.1.1.30.13.2.3.11.1.4 |
shelfCardTestCustomizedPatternThis attribute specifies a 32 bit sequence used to fill frames when
the framePatternType attribute has value customizedPattern. The
default value gives a pattern of alternating 0 and 1 bits.rw Hex .1.3.6.1.4.1.3764.1.1.30.13.2.3.11.1.5 |
shelfCardTestDurationThis attribute specifies the maximum length of time that the card
test is allowed to run. The value is expressed in minutes. The
maximum allowed value permits the card test to be run for up to 30
days.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.13.2.3.11.1.6 |
shelfCardTestResultsTableThis attribute group contains the results of the card test that is
currently running; if no test is running, the attribute group contains
the results of the most recently completed card test. The attributes
of the Results group are reset to their inital values whenever a card
test is started or any attribute of the Setup group is set. SEQUENCE OF ShelfCardTestResultsEntry .1.3.6.1.4.1.3764.1.1.30.13.2.3.12 |
shelfCardTestResultsEntryAn entry in the shelfCardTestResultsTable. ShelfCardTestResultsEntry .1.3.6.1.4.1.3764.1.1.30.13.2.3.12.1 |
shelfCardTestElapsedTimeThis attribute records the length of time (in minutes) that the card
test has been running.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.13.2.3.12.1.1 |
shelfCardTestTimeRemainingThis attribute records the maximum length of time (in minutes) that
the card test will continue to run before stopping.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.13.2.3.12.1.2 |
shelfCardTestCauseOfTerminationThis attribute records the reason the card test ended. It contains one
of the following values.
neverStarted: the card test has not been started
testRunning: the card test is currently running
testTimeExpired: the card test ran for the specified duration
stoppedByOperator: a STOP command was issued
targetFailed: the target card became non-operational
becameActive: the source card became the active card for some LPro Enumeration .1.3.6.1.4.1.3764.1.1.30.13.2.3.12.1.3 |
shelfCardTestSizeTableThis attribute specifies for each priority level the number of data
bytes in each frame sent during the card test. (The value specified
does not include the 4-byte header that is automatically added to a
frame when it is transmitted over the backplane.) SEQUENCE OF ShelfCardTestSizeEntry .1.3.6.1.4.1.3764.1.1.30.13.2.3.253 |
shelfCardTestSizeEntryAn entry in the shelfCardTestSizeTable. ShelfCardTestSizeEntry .1.3.6.1.4.1.3764.1.1.30.13.2.3.253.1 |
shelfCardTestSizeIndexThis variable represents the shelfCardTestSizeTable
specific index for the shelfCardTestSizeTable. Enumeration .1.3.6.1.4.1.3764.1.1.30.13.2.3.253.1.1 |
shelfCardTestSizeValueThis variable represents an individual value for the
shelfCardTestSizeTable.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.13.2.3.253.1.2 |
shelfCardTestLoadingFrmDataTableThis attribute records information about the loading frames that
have been transmitted to the Test component on the target card. The
following data is shown for each priority level:
the number of frames that have been transmitted,
the number of frames that were not returned successfully.
The attribute's values wrap around to zero when they exceed the
maximum permitted value.
Note: A loading frame is considered to have been successfully
returned even if it contains bit errors. Frame error statistics are
recorded in the verificationFrmData attribute. SEQUENCE OF ShelfCardTestLoadingFrmDataEntry .1.3.6.1.4.1.3764.1.1.30.13.2.3.254 |
shelfCardTestLoadingFrmDataEntryAn entry in the shelfCardTestLoadingFrmDataTable. ShelfCardTestLoadingFrmDataEntry .1.3.6.1.4.1.3764.1.1.30.13.2.3.254.1 |
shelfCardTestLoadingFrmDataResultsIndexThis variable represents the next to last index for the
shelfCardTestLoadingFrmDataTable. Enumeration .1.3.6.1.4.1.3764.1.1.30.13.2.3.254.1.1 |
shelfCardTestLoadingFrmDataPriorityIndexThis variable represents the final index for the
shelfCardTestLoadingFrmDataTable. Enumeration .1.3.6.1.4.1.3764.1.1.30.13.2.3.254.1.2 |
shelfCardTestLoadingFrmDataValueThis variable represents an individual value for the
shelfCardTestLoadingFrmDataTable.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.13.2.3.254.1.3 |
shelfCardTestVerificationFrmDataTableThis attribute records information about the verification frames that
have been transmitted to the Test component on the target card. The
following data is shown for each priority level:
the number of frames that have been tested,
the number of frames that had incorrect bits when returned.
The attribute's values wrap around to zero when they exceed the
maximum permitted value.
Note: Verification frames that are not returned at all, or are returned
too late, are considered 'lost' and are not counted in either of the
above values. Frame loss statistics are recorded in the
loadingFrmData attribute. SEQUENCE OF ShelfCardTestVerificationFrmDataEntry .1.3.6.1.4.1.3764.1.1.30.13.2.3.255 |
shelfCardTestVerificationFrmDataEntryAn entry in the shelfCardTestVerificationFrmDataTable. ShelfCardTestVerificationFrmDataEntry .1.3.6.1.4.1.3764.1.1.30.13.2.3.255.1 |
shelfCardTestVerificationFrmDataResultsIndexThis variable represents the next to last index for the
shelfCardTestVerificationFrmDataTable. Enumeration .1.3.6.1.4.1.3764.1.1.30.13.2.3.255.1.1 |
shelfCardTestVerificationFrmDataPriorityIndexThis variable represents the final index for the
shelfCardTestVerificationFrmDataTable. Enumeration .1.3.6.1.4.1.3764.1.1.30.13.2.3.255.1.2 |
shelfCardTestVerificationFrmDataValueThis variable represents an individual value for the
shelfCardTestVerificationFrmDataTable.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.13.2.3.255.1.3 |
shelfCardDiag OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.13.2.4 |
shelfCardDiagRowStatusTableThis entry controls the addition and deletion of
shelfCardDiag components. SEQUENCE OF ShelfCardDiagRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.13.2.4.1 |
shelfCardDiagRowStatusEntryA single entry in the table represents a single
shelfCardDiag component. ShelfCardDiagRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.13.2.4.1.1 |
shelfCardDiagRowStatusThis variable is used as the basis for SNMP naming of
shelfCardDiag components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.13.2.4.1.1.1 |
shelfCardDiagComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.13.2.4.1.1.2 |
shelfCardDiagStorageTypeThis variable represents the storage type value for the
shelfCardDiag tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.13.2.4.1.1.4 |
shelfCardDiagIndexThis variable represents the index for the shelfCardDiag tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.13.2.4.1.1.10 |
shelfCardDiagTrapData OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.13.2.4.2 |
shelfCardDiagTrapDataRowStatusTableThis entry controls the addition and deletion of
shelfCardDiagTrapData components. SEQUENCE OF ShelfCardDiagTrapDataRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.13.2.4.2.1 |
shelfCardDiagTrapDataRowStatusEntryA single entry in the table represents a single
shelfCardDiagTrapData component. ShelfCardDiagTrapDataRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.13.2.4.2.1.1 |
shelfCardDiagTrapDataRowStatusThis variable is used as the basis for SNMP naming of
shelfCardDiagTrapData components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.13.2.4.2.1.1.1 |
shelfCardDiagTrapDataComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.13.2.4.2.1.1.2 |
shelfCardDiagTrapDataStorageTypeThis variable represents the storage type value for the
shelfCardDiagTrapData tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.13.2.4.2.1.1.4 |
shelfCardDiagTrapDataIndexThis variable represents the index for the shelfCardDiagTrapData tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.13.2.4.2.1.1.10 |
shelfCardDiagTrapDataLine OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.13.2.4.2.2 |
shelfCardDiagTrapDataLineRowStatusTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
shelfCardDiagTrapDataLine components. SEQUENCE OF ShelfCardDiagTrapDataLineRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.13.2.4.2.2.1 |
shelfCardDiagTrapDataLineRowStatusEntryA single entry in the table represents a single
shelfCardDiagTrapDataLine component. ShelfCardDiagTrapDataLineRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.13.2.4.2.2.1.1 |
shelfCardDiagTrapDataLineRowStatusThis variable is used as the basis for SNMP naming of
shelfCardDiagTrapDataLine components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.13.2.4.2.2.1.1.1 |
shelfCardDiagTrapDataLineComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.13.2.4.2.2.1.1.2 |
shelfCardDiagTrapDataLineStorageTypeThis variable represents the storage type value for the
shelfCardDiagTrapDataLine tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.13.2.4.2.2.1.1.4 |
shelfCardDiagTrapDataLineIndexThis variable represents the index for the shelfCardDiagTrapDataLine tables. Integer32 .1.3.6.1.4.1.3764.1.1.30.13.2.4.2.2.1.1.10 |
shelfCardDiagTrapDataLineOperTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This attribute group contains operational attributes for one line of
trap data or recoverable error report. SEQUENCE OF ShelfCardDiagTrapDataLineOperEntry .1.3.6.1.4.1.3764.1.1.30.13.2.4.2.2.10 |
shelfCardDiagTrapDataLineOperEntryAn entry in the shelfCardDiagTrapDataLineOperTable. ShelfCardDiagTrapDataLineOperEntry .1.3.6.1.4.1.3764.1.1.30.13.2.4.2.2.10.1 |
shelfCardDiagTrapDataLineDataThis attribute contains one line of trap data or recoverable error
report.ro ExtendedAsciiString .1.3.6.1.4.1.3764.1.1.30.13.2.4.2.2.10.1.1 |
shelfCardDiagRecErr OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.13.2.4.3 |
shelfCardDiagRecErrRowStatusTableThis entry controls the addition and deletion of
shelfCardDiagRecErr components. SEQUENCE OF ShelfCardDiagRecErrRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.13.2.4.3.1 |
shelfCardDiagRecErrRowStatusEntryA single entry in the table represents a single
shelfCardDiagRecErr component. ShelfCardDiagRecErrRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.13.2.4.3.1.1 |
shelfCardDiagRecErrRowStatusThis variable is used as the basis for SNMP naming of
shelfCardDiagRecErr components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.13.2.4.3.1.1.1 |
shelfCardDiagRecErrComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.13.2.4.3.1.1.2 |
shelfCardDiagRecErrStorageTypeThis variable represents the storage type value for the
shelfCardDiagRecErr tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.13.2.4.3.1.1.4 |
shelfCardDiagRecErrIndexThis variable represents the index for the shelfCardDiagRecErr tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.13.2.4.3.1.1.10 |
shelfCardDiagRecErrLine OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.13.2.4.3.2 |
shelfCardDiagRecErrLineRowStatusTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
shelfCardDiagRecErrLine components. SEQUENCE OF ShelfCardDiagRecErrLineRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.13.2.4.3.2.1 |
shelfCardDiagRecErrLineRowStatusEntryA single entry in the table represents a single
shelfCardDiagRecErrLine component. ShelfCardDiagRecErrLineRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.13.2.4.3.2.1.1 |
shelfCardDiagRecErrLineRowStatusThis variable is used as the basis for SNMP naming of
shelfCardDiagRecErrLine components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.13.2.4.3.2.1.1.1 |
shelfCardDiagRecErrLineComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.13.2.4.3.2.1.1.2 |
shelfCardDiagRecErrLineStorageTypeThis variable represents the storage type value for the
shelfCardDiagRecErrLine tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.13.2.4.3.2.1.1.4 |
shelfCardDiagRecErrLineIndexThis variable represents the index for the shelfCardDiagRecErrLine tables. Integer32 .1.3.6.1.4.1.3764.1.1.30.13.2.4.3.2.1.1.10 |
shelfCardDiagRecErrLineOperTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This attribute group contains operational attributes for one line of
trap data or recoverable error report. SEQUENCE OF ShelfCardDiagRecErrLineOperEntry .1.3.6.1.4.1.3764.1.1.30.13.2.4.3.2.10 |
shelfCardDiagRecErrLineOperEntryAn entry in the shelfCardDiagRecErrLineOperTable. ShelfCardDiagRecErrLineOperEntry .1.3.6.1.4.1.3764.1.1.30.13.2.4.3.2.10.1 |
shelfCardDiagRecErrLineDataThis attribute contains one line of trap data or recoverable error
report.ro ExtendedAsciiString .1.3.6.1.4.1.3764.1.1.30.13.2.4.3.2.10.1.1 |
shelfCardProvTableThis group contains the provisionable attributes for the Card
component. SEQUENCE OF ShelfCardProvEntry .1.3.6.1.4.1.3764.1.1.30.13.2.10 |
shelfCardProvEntryAn entry in the shelfCardProvTable. ShelfCardProvEntry .1.3.6.1.4.1.3764.1.1.30.13.2.10.1 |
shelfCardCardTypeThis is the type of card expected in this slot. Specifying a card type
here has the effect of configuring a card to run in this slot. A value
of none means that no card is configured to run in this slot.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.13.2.10.1.1 |
shelfCardSparingConnectionThis attribute contains the identification of the 1 for N sparing panel
group of connectors to which the card is connected. This
identification should coincide with the label located on the sparing
panel.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.13.2.10.1.2 |
shelfCardCommentTextThis is an arbitrary string that can be used to specify the location of
the sparing panel.rw AsciiString .1.3.6.1.4.1.3764.1.1.30.13.2.10.1.4 |
shelfCardStateTableThis group contains the three OSI State attributes and the six OSI
Status attributes. The descriptions generically indicate what each
attribute implies about the component. Note that not all the values
and state combinations described here are supported by every
component which uses this group. For component-specific
information and the valid state combinations, refer to NTP 241-
7001-150, Passport Operations and Maintenance Guide. SEQUENCE OF ShelfCardStateEntry .1.3.6.1.4.1.3764.1.1.30.13.2.11 |
shelfCardStateEntryAn entry in the shelfCardStateTable. ShelfCardStateEntry .1.3.6.1.4.1.3764.1.1.30.13.2.11.1 |
shelfCardAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.13.2.11.1.1 |
shelfCardOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.13.2.11.1.2 |
shelfCardUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.13.2.11.1.3 |
shelfCardAvailabilityStatusIf supported by the component, this attribute indicates the OSI
Availability status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value inTest indicates that the resource is undergoing a test
procedure. If adminState is locked or shuttingDown, the normal
users are precluded from using the resource and controlStatus is
reservedForTest. Tests that do not exclude additional users can be
present in any operational or administrative state but the
reservedForTest condition should not be present.
The value failed indicates that the component has an internal fault
that prevents it from operating. The operationalState is disabled.
The value dependency indicates that the component cannot operate
because some other resource on which it depends is unavailable.
The operationalState is disabled.
The value powerOff indicates the resource requires power to be
applied and it is not powered on. The operationalState is disabled.
The value offLine indicates the resource requires a routine
operation (either manual, automatic, or both) to be performed to
place it on-line and make it available for use. The operationalState
is disabled.
The value offDuty indicates the resource is inactive in accordance
with a predetermined time schedule. In the absence of other
disabling conditions, the operationalState is enabled or disabled.
The value degraded indicates the service provided by the
component is degraded in some way, such as in speed or operating
capacity. However, the resource remains available for service. The
operationalState is enabled.
The value notInstalled indicates the resource is not present. The
operationalState is disabled.
The value logFull is not used.
Description of bits:
inTest(0)
failed(1)
powerOff(2)
offLine(3)
offDuty(4)
dependency(5)
degraded(6)
notInstalled(7)
logFull(8)ro OCTET STRING .1.3.6.1.4.1.3764.1.1.30.13.2.11.1.4 |
shelfCardProceduralStatusIf supported by the component, this attribute indicates the OSI
Procedural status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value initializationRequired indicates (for a resource which
doesn't initialize autonomously) that initialization is required before
it can perform its normal functions, and this procedure has not been
initiated. The operationalState is disabled.
The value notInitialized indicates (for a resource which does
initialize autonomously) that initialization is required before it can
perform its normal functions, and this procedure has not been
initiated. The operationalState may be enabled or disabled.
The value initializing indicates that initialization has been initiated
but is not yet complete. The operationalState may be enabled or
disabled.
The value reporting indicates the resource has completed some
processing operation and is notifying the results. The
operationalState is enabled.
The value terminating indicates the component is in a termination
phase. If the resource doesn't reinitialize autonomously,
operationalState is disabled; otherwise it is enabled or disabled.
Description of bits:
initializationRequired(0)
notInitialized(1)
initializing(2)
reporting(3)
terminating(4)ro OCTET STRING .1.3.6.1.4.1.3764.1.1.30.13.2.11.1.5 |
shelfCardControlStatusIf supported by the component, this attribute indicates the OSI
Control status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value subjectToTest indicates the resource is available but tests
may be conducted simultaneously at unpredictable times, which
may cause it to exhibit unusual characteristics.
The value partOfServicesLocked indicates that part of the service is
restricted from users of a resource. The adminState is unlocked.
The value reservedForTest indicates that the component is
administratively unavailable because it is undergoing a test
procedure. The adminState is locked.
The value suspended indicates that the service has been
administratively suspended.
Description of bits:
subjectToTest(0)
partOfServicesLocked(1)
reservedForTest(2)
suspended(3)ro OCTET STRING .1.3.6.1.4.1.3764.1.1.30.13.2.11.1.6 |
shelfCardAlarmStatusIf supported by the component, this attribute indicates the OSI
Alarm status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value underRepair indicates the component is currently being
repaired. The operationalState is enabled or disabled.
The value critical indicates one or more critical alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value major indicates one or more major alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value minor indicates one or more minor alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value alarmOutstanding generically indicates that an alarm of
some severity is outstanding against the component.
Description of bits:
underRepair(0)
critical(1)
major(2)
minor(3)
alarmOutstanding(4)ro OCTET STRING .1.3.6.1.4.1.3764.1.1.30.13.2.11.1.7 |
shelfCardStandbyStatusIf supported by the component, this attribute indicates the OSI
Standby status of the component.
The value notSet indicates that either the attribute is not supported
or that none of the status conditions described below are present.
Note that this is a non-standard value, used because the original
specification indicated this attribute was set-valued and thus, did not
provide a value to indicate that none of the other three are
applicable.
The value hotStandby indicates that the resource is not providing
service but will be immediately able to take over the role of the
resource to be backed up, without initialization activity, and
containing the same information as the resource to be backed up.
The value coldStandby indicates the resource is a backup for
another resource but will not be immediately able to take over the
role of the backed up resource and will require some initialization
activity.
The value providingService indicates that this component, as a
backup resource, is currently backing up another resource.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.13.2.11.1.8 |
shelfCardUnknownStatusThis attribute indicates the OSI Unknown status of the component.
The value false indicates that all of the other OSI State and Status
attribute values can be considered accurate.
The value true indicates that the actual state of the component is not
known for sure.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.13.2.11.1.9 |
shelfCardOperTableThis group contains the operational attributes that reflect the current
status of the card. SEQUENCE OF ShelfCardOperEntry .1.3.6.1.4.1.3764.1.1.30.13.2.12 |
shelfCardOperEntryAn entry in the shelfCardOperTable. ShelfCardOperEntry .1.3.6.1.4.1.3764.1.1.30.13.2.12.1 |
shelfCardCurrentLPThis is the component name of the LP currently running on this
card.roobsolete RowPointer .1.3.6.1.4.1.3764.1.1.30.13.2.12.1.1 |
shelfCardFailureCauseThis attribute specifies why the card has failed. This attribute is
meaningful when the OSI AvailabilityStatus attribute is set to
failed.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.13.2.12.1.2 |
shelfCardSelfTestFaultThis attribute indicates the result of the processor card's self-tests
that were performed when it initially came up.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.13.2.12.1.3 |
shelfCardSparingConnectionStatusThis attribute indicates if the control signal received from a 1forN
sparing panel or a 1for1 sparing panel is properly terminated.
notApplicable - The card is not provisioned as part of a
sparing configuration, and is not connected to any sparing panel.
1for1Ok -The card is provisioned correctly for 1for1 sparing and is
connected to the active relay of a 1for1 sparing panel.
1forNOk -The card is provisioned correctly for either 1for1 or
1forN sparing and is connected to either the standby or active relay
of a 1forN sparing panel.
unconfirmed -The card is provisioned as part of a sparing
configuration, but its connection status cannot be determined.
To determine if the card is connected to a sparing panel, perform a
switchover of the LP to see if the card will grab a relay when it is
active. If the card has grabbed the relay, the sparing connection
status should change from, unconfirmed, to 1for1Ok and the LED
on the sparing panel corresponfing to that relay should be
illuminated.
Please note: Performing the switchover will disrupt traffic on the
other card and this test should be conducted when no traffic is
running on the active card.
notConnected - The card is provisioned as part of a sparing
configuration, but is not connected to a sparing panel.
Remedial Action: Check the cable connectivity between the card
and the sparing panel.
incorrectlyConnected - The card is provisioned as part of a sparing
configuration, but is connected to the wrong port on a 1forN panel,
or is connected to a 1for1 sparing panel while configured for 1forN.
Remedial Action: Connect the cable to the port that was specified
by the sparingConnection attribute.
inconsistentlyConnected - The card is provisioned as part of a
1forN sparing configuration, but is connected to a sparing panel
which is not the same as the other cards sharing the same spare
card.
Remedial Action: Ensure all cards that share the same spare card
are connected to the same sparing panel.
This value is also used to indicate that two sparing panels with the
same sparing panel IDs are being used by cards on the same shelf.
Remedial Action: Replace one of the sparing panels with another
panel that has a different sparing panel ID. Sparing panel IDs are
assigned at the time of manufacture and cannot be changed by the
user.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.13.2.12.1.4 |
shelfCardPropTableThis group contains the operational attributes that specify the fixed
characteristics of the card. SEQUENCE OF ShelfCardPropEntry .1.3.6.1.4.1.3764.1.1.30.13.2.13 |
shelfCardPropEntryAn entry in the shelfCardPropTable. ShelfCardPropEntry .1.3.6.1.4.1.3764.1.1.30.13.2.13.1 |
shelfCardInsertedCardTypeThis attribute indicates the type of card that is currently inserted in
this slot.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.13.2.13.1.1 |
shelfCardPmRevisionCodeThis attribute indicates the hardware revision level of the Processor
Module (PM).ro AsciiString .1.3.6.1.4.1.3764.1.1.30.13.2.13.1.2 |
shelfCardImRevisionCodeThis attribute indicates the hardware revision level of the Interface
Module (IM).ro AsciiString .1.3.6.1.4.1.3764.1.1.30.13.2.13.1.3 |
shelfCardSerialNumberThis attribute indicates the processor card's serial number.ro AsciiString .1.3.6.1.4.1.3764.1.1.30.13.2.13.1.4 |
shelfCardActiveFirmwareVersionThis attribute indicates the firmware version of the currently active
flash memory bank.ro AsciiString .1.3.6.1.4.1.3764.1.1.30.13.2.13.1.5 |
shelfCardInactiveFirmwareVersionThis attribute indicates the firmware version of the currently
inactive flash memory bank.ro AsciiString .1.3.6.1.4.1.3764.1.1.30.13.2.13.1.6 |
shelfCardProductCodeThis attribute indicates the product ordering code and release of the
card.ro AsciiString .1.3.6.1.4.1.3764.1.1.30.13.2.13.1.7 |
shelfCardUtilTableThis group contains the operational attributes that specify the
processor's utilization levels. When this group exists for an LP
component, the attributes are representative of the active card. SEQUENCE OF ShelfCardUtilEntry .1.3.6.1.4.1.3764.1.1.30.13.2.14 |
shelfCardUtilEntryAn entry in the shelfCardUtilTable. ShelfCardUtilEntry .1.3.6.1.4.1.3764.1.1.30.13.2.14.1 |
shelfCardTimeIntervalThis attribute indicates the time period (in minutes) for which the
average, minimum and maximum utilization values are calculated.
This attribute is reset to 0 every 15 minutes.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.13.2.14.1.1 |
shelfCardCpuUtilThis attribute indicates an approximation of the current processor
utilization level (expressed as a percentage).ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.13.2.14.1.2 |
shelfCardCpuUtilAvgThis attribute indicates an average processor utilization level over
the specified time period, timeInterval. This average is calculated
based on one minute CPU utilization averages.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.13.2.14.1.3 |
shelfCardCpuUtilAvgMinThis attribute indicates the minimum processor utilization level over
a specified time period, timeInterval. This is based on one minute
CPU utilization averages.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.13.2.14.1.4 |
shelfCardCpuUtilAvgMaxThis attribute indicates the maximum processor utilization level
over a specified time period, timeInterval. This is based on one
minute CPU utilization averages.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.13.2.14.1.5 |
shelfCardMsgBlockUsageThis attribute indicates the processor's current shared message
block memory utilization (in kilobytes).
If there is no shared memory on the card, this attribute indicates 0.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.13.2.14.1.6 |
shelfCardMsgBlockUsageAvgThis attribute indicates the processor's average memory utilization
(in kilobytes) of shared message blocks, calculated over a specified
time period, timeInterval. This utilization value is calculated using
15 second samples. At the start of each timeInterval, this average
memory utilization is reset to the current usage,
sharedMsgBlockUsage.
If there is no shared memory on the card, this attribute indicates 0.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.13.2.14.1.7 |
shelfCardMsgBlockUsageAvgMinThis attribute indicates the processor's minimum memory
utilization (in kilobytes) of shared message blocks, calculated over a
specified time period, timeInterval. This utilization value is
calculated using 15 second samples. At the start of each
timeInterval, this minimum memory utilization is reset to the
current usage, sharedMsgBlockUsage.
If there is no shared memory on the card, this attribute indicates 0.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.13.2.14.1.8 |
shelfCardMsgBlockUsageAvgMaxThis attribute indicates the processor's maximum memory
utilization (in kilobytes) of shared message blocks, calculated over a
specified time period, timeInterval. This utilization value is
calculated using 15 second samples. At the start of each
timeInterval, this maximum memory utilization is reset to the
current usage, sharedMsgBlockUsage.
If there is no shared memory on the card, this attribute indicates 0.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.13.2.14.1.9 |
shelfCardLocalMsgBlockUsageThis attribute indicates the processor's current memory utilization
(in kilobytes) of message blocks which are used for local messaging
on the card.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.13.2.14.1.10 |
shelfCardLocalMsgBlockUsageAvgThis attribute indicates the processor's average memory utilization
(in kilobytes) of message blocks used for local messaging on the
card, calculated over a specified time period, timeInterval. This
utilization value is calculated using 15 second samples. At the start
of each timeInterval, this average memory utilization is reset to the
current usage, localMsgBlockUsage.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.13.2.14.1.11 |
shelfCardLocalMsgBlockUsageMinThis attribute indicates the processor's minimum memory
utilization (in kilobytes) of message blocks used for local
messaging on the card, calculated over a specified time period,
timeInterval. This utilization value is updated at 15 second
intervals. At the start of each timeInterval, this minimum memory
utilization is reset to the current usage, localMsgBlockUsage.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.13.2.14.1.12 |
shelfCardLocalMsgBlockUsageMaxThis attribute indicates the processor's maximum memory
utilization (in kilobytes) of message blocks used for local
messaging on the card, calculated over a specified time period,
timeInterval. This utilization value is updated at 15 second
intervals. At the start of each timeInterval, this maximum memory
utilization is reset to the current usage, localMsgBlockUsage.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.13.2.14.1.13 |
shelfCardCapTableThis group contains the operational attributes that specify the
processor's capacity levels. When this group exists for an LP
component, the attributes are representative of the active Card. SEQUENCE OF ShelfCardCapEntry .1.3.6.1.4.1.3764.1.1.30.13.2.15 |
shelfCardCapEntryAn entry in the shelfCardCapTable. ShelfCardCapEntry .1.3.6.1.4.1.3764.1.1.30.13.2.15.1 |
shelfCardMsgBlockCapacityThis attribute indicates the processor card's shared message block
memory capacity (in kilobytes).ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.13.2.15.1.1 |
shelfCardLocalMsgBlockCapacityThis attribute indicates the processor card's local message block
memory capacity (in kilobytes). These message blocks are used for
local messaging on the card.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.13.2.15.1.2 |
shelfCardDcard OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.13.2.16 |
shelfCardDcardRowStatusTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
shelfCardDcard components. SEQUENCE OF ShelfCardDcardRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.13.2.16.1 |
shelfCardDcardRowStatusEntryA single entry in the table represents a single
shelfCardDcard component. ShelfCardDcardRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.13.2.16.1.1 |
shelfCardDcardRowStatusThis variable is used as the basis for SNMP naming of
shelfCardDcard components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.13.2.16.1.1.1 |
shelfCardDcardComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.13.2.16.1.1.2 |
shelfCardDcardStorageTypeThis variable represents the storage type value for the
shelfCardDcard tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.13.2.16.1.1.4 |
shelfCardDcardIndexThis variable represents the index for the shelfCardDcard tables. Integer32 .1.3.6.1.4.1.3764.1.1.30.13.2.16.1.1.10 |
shelfCardDcardDcardOperTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group contains the operational attributes of the DaughterCard
component. SEQUENCE OF ShelfCardDcardDcardOperEntry .1.3.6.1.4.1.3764.1.1.30.13.2.16.17 |
shelfCardDcardDcardOperEntryAn entry in the shelfCardDcardDcardOperTable. ShelfCardDcardDcardOperEntry .1.3.6.1.4.1.3764.1.1.30.13.2.16.17.1 |
shelfCardDcardTypeThis attributes indicates the type of a daugher card.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.13.2.16.17.1.1 |
shelfCardDcardMemorySizeThis attribute indicates the memory size in megabytes of the
daughter card.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.13.2.16.17.1.2 |
shelfCardDcardProductCodeThis attribute indicates the product equipment code of the daughter
card.ro AsciiString .1.3.6.1.4.1.3764.1.1.30.13.2.16.17.1.3 |
shelfCardConfiguredLPsTableThis is a read-only attribute that shows which LPs are currently
configured to run on this card (it is the opposite side of the LP
component's mainCard and spareCard link attributes). Note that
there is only one case where more than one LP can be configured to
run on a card. This is when the card is configured as an N+1 spare.
If this is not the case, the card is configured as a main card or as a
1for1 spare, only one LP can appear in this list. SEQUENCE OF ShelfCardConfiguredLPsEntry .1.3.6.1.4.1.3764.1.1.30.13.2.243 |
shelfCardConfiguredLPsEntryAn entry in the shelfCardConfiguredLPsTable. ShelfCardConfiguredLPsEntry .1.3.6.1.4.1.3764.1.1.30.13.2.243.1 |
shelfCardConfiguredLPsValueThis variable represents both the value and the index for the
shelfCardConfiguredLPsTable.ro Link .1.3.6.1.4.1.3764.1.1.30.13.2.243.1.1 |
shelfCardMemoryCapacityTableThis attribute indicates the processor card's memory capacity (in
kilobytes) for each type of memory. SEQUENCE OF ShelfCardMemoryCapacityEntry .1.3.6.1.4.1.3764.1.1.30.13.2.244 |
shelfCardMemoryCapacityEntryAn entry in the shelfCardMemoryCapacityTable. ShelfCardMemoryCapacityEntry .1.3.6.1.4.1.3764.1.1.30.13.2.244.1 |
shelfCardMemoryCapacityIndexThis variable represents the shelfCardMemoryCapacityTable
specific index for the shelfCardMemoryCapacityTable. Enumeration .1.3.6.1.4.1.3764.1.1.30.13.2.244.1.1 |
shelfCardMemoryCapacityValueThis variable represents an individual value for the
shelfCardMemoryCapacityTable.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.13.2.244.1.2 |
shelfCardMemoryUsageTableThis attribute indicates the processor's current memory utilization
(in kilobytes) for each type of memory. SEQUENCE OF ShelfCardMemoryUsageEntry .1.3.6.1.4.1.3764.1.1.30.13.2.245 |
shelfCardMemoryUsageEntryAn entry in the shelfCardMemoryUsageTable. ShelfCardMemoryUsageEntry .1.3.6.1.4.1.3764.1.1.30.13.2.245.1 |
shelfCardMemoryUsageIndexThis variable represents the shelfCardMemoryUsageTable
specific index for the shelfCardMemoryUsageTable. Enumeration .1.3.6.1.4.1.3764.1.1.30.13.2.245.1.1 |
shelfCardMemoryUsageValueThis variable represents an individual value for the
shelfCardMemoryUsageTable.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.13.2.245.1.2 |
shelfCardMemoryUsageAvgTableThis attribute indicates the processor's average memory utilization
(in kilobytes) for each type of memory in the specified time period,
timeInterval. This value is calculated using 15 second samples. SEQUENCE OF ShelfCardMemoryUsageAvgEntry .1.3.6.1.4.1.3764.1.1.30.13.2.276 |
shelfCardMemoryUsageAvgEntryAn entry in the shelfCardMemoryUsageAvgTable. ShelfCardMemoryUsageAvgEntry .1.3.6.1.4.1.3764.1.1.30.13.2.276.1 |
shelfCardMemoryUsageAvgIndexThis variable represents the shelfCardMemoryUsageAvgTable
specific index for the shelfCardMemoryUsageAvgTable. Enumeration .1.3.6.1.4.1.3764.1.1.30.13.2.276.1.1 |
shelfCardMemoryUsageAvgValueThis variable represents an individual value for the
shelfCardMemoryUsageAvgTable.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.13.2.276.1.2 |
shelfCardMemoryUsageAvgMinTableThis attribute indicates the processor's minimum memory
utilization (in kilobytes) for each type of memory in the specified
time period, timeInterval. This value is calculated using 15 second
samples. SEQUENCE OF ShelfCardMemoryUsageAvgMinEntry .1.3.6.1.4.1.3764.1.1.30.13.2.277 |
shelfCardMemoryUsageAvgMinEntryAn entry in the shelfCardMemoryUsageAvgMinTable. ShelfCardMemoryUsageAvgMinEntry .1.3.6.1.4.1.3764.1.1.30.13.2.277.1 |
shelfCardMemoryUsageAvgMinIndexThis variable represents the shelfCardMemoryUsageAvgMinTable
specific index for the shelfCardMemoryUsageAvgMinTable. Enumeration .1.3.6.1.4.1.3764.1.1.30.13.2.277.1.1 |
shelfCardMemoryUsageAvgMinValueThis variable represents an individual value for the
shelfCardMemoryUsageAvgMinTable.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.13.2.277.1.2 |
shelfCardMemoryUsageAvgMaxTableThis attribute indicates the processor's maximum memory
utilization (in kilobytes) for each type of memory in the specified
time period, timeInterval. This value is calculated using 15 second
samples. SEQUENCE OF ShelfCardMemoryUsageAvgMaxEntry .1.3.6.1.4.1.3764.1.1.30.13.2.278 |
shelfCardMemoryUsageAvgMaxEntryAn entry in the shelfCardMemoryUsageAvgMaxTable. ShelfCardMemoryUsageAvgMaxEntry .1.3.6.1.4.1.3764.1.1.30.13.2.278.1 |
shelfCardMemoryUsageAvgMaxIndexThis variable represents the shelfCardMemoryUsageAvgMaxTable
specific index for the shelfCardMemoryUsageAvgMaxTable. Enumeration .1.3.6.1.4.1.3764.1.1.30.13.2.278.1.1 |
shelfCardMemoryUsageAvgMaxValueThis variable represents an individual value for the
shelfCardMemoryUsageAvgMaxTable.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.13.2.278.1.2 |
shelfCardCurrentLpTableThis attribute indicates which LPs are currently associated with this
card. A card configured as a 1forN spare may be associated with
more than one LP. SEQUENCE OF ShelfCardCurrentLpEntry .1.3.6.1.4.1.3764.1.1.30.13.2.406 |
shelfCardCurrentLpEntryAn entry in the shelfCardCurrentLpTable. ShelfCardCurrentLpEntry .1.3.6.1.4.1.3764.1.1.30.13.2.406.1 |
shelfCardCurrentLpValueThis variable represents both the value and the index for the
shelfCardCurrentLpTable.ro RowPointer .1.3.6.1.4.1.3764.1.1.30.13.2.406.1.1 |
shelfBus OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.13.3 |
shelfBusRowStatusTableThis entry controls the addition and deletion of
shelfBus components. SEQUENCE OF ShelfBusRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.13.3.1 |
shelfBusRowStatusEntryA single entry in the table represents a single
shelfBus component. ShelfBusRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.13.3.1.1 |
shelfBusRowStatusThis variable is used as the basis for SNMP naming of
shelfBus components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.13.3.1.1.1 |
shelfBusComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.13.3.1.1.2 |
shelfBusStorageTypeThis variable represents the storage type value for the
shelfBus tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.13.3.1.1.4 |
shelfBusIndexThis variable represents the index for the shelfBus tables. Enumeration .1.3.6.1.4.1.3764.1.1.30.13.3.1.1.10 |
shelfBusTest OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.13.3.2 |
shelfBusTestRowStatusTableThis entry controls the addition and deletion of
shelfBusTest components. SEQUENCE OF ShelfBusTestRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.13.3.2.1 |
shelfBusTestRowStatusEntryA single entry in the table represents a single
shelfBusTest component. ShelfBusTestRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.13.3.2.1.1 |
shelfBusTestRowStatusThis variable is used as the basis for SNMP naming of
shelfBusTest components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.13.3.2.1.1.1 |
shelfBusTestComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.13.3.2.1.1.2 |
shelfBusTestStorageTypeThis variable represents the storage type value for the
shelfBusTest tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.13.3.2.1.1.4 |
shelfBusTestIndexThis variable represents the index for the shelfBusTest tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.13.3.2.1.1.10 |
shelfBusTestStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF ShelfBusTestStateEntry .1.3.6.1.4.1.3764.1.1.30.13.3.2.10 |
shelfBusTestStateEntryAn entry in the shelfBusTestStateTable. ShelfBusTestStateEntry .1.3.6.1.4.1.3764.1.1.30.13.3.2.10.1 |
shelfBusTestAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.13.3.2.10.1.1 |
shelfBusTestOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.13.3.2.10.1.2 |
shelfBusTestUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.13.3.2.10.1.3 |
shelfBusTestSetupTableThis attribute group contains the attributes that govern the operation
of a bus test. These attributes cannot be changed while the bus test
is running. SEQUENCE OF ShelfBusTestSetupEntry .1.3.6.1.4.1.3764.1.1.30.13.3.2.11 |
shelfBusTestSetupEntryAn entry in the shelfBusTestSetupTable. ShelfBusTestSetupEntry .1.3.6.1.4.1.3764.1.1.30.13.3.2.11.1 |
shelfBusTestDurationThis attribute specifies the maximum length of time that the bus test
is allowed to run. The value is expressed in minutes. The maximum
allowed value permits the bus test to be run for up to 30 days.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.13.3.2.11.1.1 |
shelfBusTestResultsTableThis attribute group contains the results of the bus test that is
currently running; if no bus test is running, the attribute group
contains the results of the most recently completed bus test. The
attributes of the Results group are reset to their initial values
whenever a bus test is started or any attribute in the Setup group is
set. SEQUENCE OF ShelfBusTestResultsEntry .1.3.6.1.4.1.3764.1.1.30.13.3.2.12 |
shelfBusTestResultsEntryAn entry in the shelfBusTestResultsTable. ShelfBusTestResultsEntry .1.3.6.1.4.1.3764.1.1.30.13.3.2.12.1 |
shelfBusTestElapsedTimeThis attribute records the length of time (in minutes) that the bus
test has been running.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.13.3.2.12.1.1 |
shelfBusTestTimeRemainingThis attribute records the maximum length of time (in minutes) that
the bus test will continue to run before stopping.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.13.3.2.12.1.2 |
shelfBusTestCauseOfTerminationThis attribute records the reason the bus test ended. It contains one
of the following values.
neverStarted: the bus test has not been started
testRunning: the bus test is currently running
testTimeExpired: the bus test ran for the specified duration
stoppedByOperator: a STOP command was issued
selfTestFailure: a failure was detected during the bus tap self-test
clockSourceFailure: a failure was detected during the test of the
active control processor (CP) clock source
broadcastFailure: a failure was detected during the broadcast testro Enumeration .1.3.6.1.4.1.3764.1.1.30.13.3.2.12.1.3 |
shelfBusTestTestsDoneThis attribute records the tests that have been performed during the
bus test. It may contain zero or more of the following values.
selfTest: the bus tap self-test has been performed
clockSourceTest: the clock source test has been performed
broadcastTest: the broadcast test has been performed
pingTest: at least one ping test has been performed
Description of bits:
selfTest(0)
clockSourceTest(1)
broadcastTest(2)
pingTest(3)ro OCTET STRING .1.3.6.1.4.1.3764.1.1.30.13.3.2.12.1.4 |
shelfBusTestSelfTestResultsTableThis attribute records the results of the bus tap self-test, indexed by
the slot number of the card containing the bus tap tested. Each entry
contains one of the following values.
+: the bus tap passed its self-test
X: the bus tap failed its self-test
.: the bus tap was not tested
The bus test terminates automatically if a failure is detected. SEQUENCE OF ShelfBusTestSelfTestResultsEntry .1.3.6.1.4.1.3764.1.1.30.13.3.2.248 |
shelfBusTestSelfTestResultsEntryAn entry in the shelfBusTestSelfTestResultsTable. ShelfBusTestSelfTestResultsEntry .1.3.6.1.4.1.3764.1.1.30.13.3.2.248.1 |
shelfBusTestSelfTestResultsIndexThis variable represents the shelfBusTestSelfTestResultsTable
specific index for the shelfBusTestSelfTestResultsTable. Integer32 .1.3.6.1.4.1.3764.1.1.30.13.3.2.248.1.1 |
shelfBusTestSelfTestResultsValueThis variable represents an individual value for the
shelfBusTestSelfTestResultsTable.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.13.3.2.248.1.2 |
shelfBusTestClockSourceTestResultsTableThis attribute records the results of the clock source test, indexed by
the clock source and the slot number of the card containing the bus
tap tested. Each entry contains one of the following values.
+: the bus tap was able to receive clock signals from the clock
source
X: the bus tap was unable to receive clock signals from the clock
source
.: the bus tap was not tested against the clock source
The bus test terminates automatically if a failure is detected
involving the active control processor (CP) clock source. SEQUENCE OF ShelfBusTestClockSourceTestResultsEntry .1.3.6.1.4.1.3764.1.1.30.13.3.2.249 |
shelfBusTestClockSourceTestResultsEntryAn entry in the shelfBusTestClockSourceTestResultsTable. ShelfBusTestClockSourceTestResultsEntry .1.3.6.1.4.1.3764.1.1.30.13.3.2.249.1 |
shelfBusTestClockSourceTestResultsSourceIndexThis variable represents the next to last index for the
shelfBusTestClockSourceTestResultsTable. Enumeration .1.3.6.1.4.1.3764.1.1.30.13.3.2.249.1.1 |
shelfBusTestClockSourceTestResultsCardIndexThis variable represents the final index for the
shelfBusTestClockSourceTestResultsTable. Integer32 .1.3.6.1.4.1.3764.1.1.30.13.3.2.249.1.2 |
shelfBusTestClockSourceTestResultsValueThis variable represents an individual value for the
shelfBusTestClockSourceTestResultsTable.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.13.3.2.249.1.3 |
shelfBusTestBroadcastTestResultsTableThis attribute records the results of the broadcast test, indexed by
the slot numbers of the cards containing the bus taps tested. Each
entry contains one of the following values.
+: a broadcast message was successfully sent from the transmitting
bus tap to the receiving bus tap
X: a broadcast message was not successfully sent from the
transmitting bus tap to the receiving bus tap
.: the associated pair of bus taps was not tested
The bus test terminates automatically if a failure is detected. SEQUENCE OF ShelfBusTestBroadcastTestResultsEntry .1.3.6.1.4.1.3764.1.1.30.13.3.2.250 |
shelfBusTestBroadcastTestResultsEntryAn entry in the shelfBusTestBroadcastTestResultsTable. ShelfBusTestBroadcastTestResultsEntry .1.3.6.1.4.1.3764.1.1.30.13.3.2.250.1 |
shelfBusTestBroadcastTestResultsTxCardIndexThis variable represents the next to last index for the
shelfBusTestBroadcastTestResultsTable. Integer32 .1.3.6.1.4.1.3764.1.1.30.13.3.2.250.1.1 |
shelfBusTestBroadcastTestResultsRxCardIndexThis variable represents the final index for the
shelfBusTestBroadcastTestResultsTable. Integer32 .1.3.6.1.4.1.3764.1.1.30.13.3.2.250.1.2 |
shelfBusTestBroadcastTestResultsValueThis variable represents an individual value for the
shelfBusTestBroadcastTestResultsTable.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.13.3.2.250.1.3 |
shelfBusTestPingTestsTableThis attribute records the number of ping tests performed, indexed
by the slot numbers of the cards containing the bus taps involved.
Each test attempts to transmit a single low-priority frame from the
transmitting bus tap to the receiving bus tap. SEQUENCE OF ShelfBusTestPingTestsEntry .1.3.6.1.4.1.3764.1.1.30.13.3.2.251 |
shelfBusTestPingTestsEntryAn entry in the shelfBusTestPingTestsTable. ShelfBusTestPingTestsEntry .1.3.6.1.4.1.3764.1.1.30.13.3.2.251.1 |
shelfBusTestPingTestsTxCardIndexThis variable represents the next to last index for the
shelfBusTestPingTestsTable. Integer32 .1.3.6.1.4.1.3764.1.1.30.13.3.2.251.1.1 |
shelfBusTestPingTestsRxCardIndexThis variable represents the final index for the
shelfBusTestPingTestsTable. Integer32 .1.3.6.1.4.1.3764.1.1.30.13.3.2.251.1.2 |
shelfBusTestPingTestsValueThis variable represents an individual value for the
shelfBusTestPingTestsTable.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.13.3.2.251.1.3 |
shelfBusTestPingFailuresTableThis attribute records the number of ping test failures detected,
indexed by the slot numbers of the cards containing the bus taps
involved. Each failure represents a single low-priority frame that
was not successfully transmitted from the transmitting bus tap to the
receiving bus tap. The bus test does not terminate automatically if a
failure is detected. SEQUENCE OF ShelfBusTestPingFailuresEntry .1.3.6.1.4.1.3764.1.1.30.13.3.2.252 |
shelfBusTestPingFailuresEntryAn entry in the shelfBusTestPingFailuresTable. ShelfBusTestPingFailuresEntry .1.3.6.1.4.1.3764.1.1.30.13.3.2.252.1 |
shelfBusTestPingFailuresTxCardIndexThis variable represents the next to last index for the
shelfBusTestPingFailuresTable. Integer32 .1.3.6.1.4.1.3764.1.1.30.13.3.2.252.1.1 |
shelfBusTestPingFailuresRxCardIndexThis variable represents the final index for the
shelfBusTestPingFailuresTable. Integer32 .1.3.6.1.4.1.3764.1.1.30.13.3.2.252.1.2 |
shelfBusTestPingFailuresValueThis variable represents an individual value for the
shelfBusTestPingFailuresTable.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.13.3.2.252.1.3 |
shelfBusStateTableThis group contains the three OSI State attributes and the six OSI
Status attributes. The descriptions generically indicate what each
attribute implies about the component. Note that not all the values
and state combinations described here are supported by every
component which uses this group. For component-specific
information and the valid state combinations, refer to NTP 241-
7001-150, Passport Operations and Maintenance Guide. SEQUENCE OF ShelfBusStateEntry .1.3.6.1.4.1.3764.1.1.30.13.3.10 |
shelfBusStateEntryAn entry in the shelfBusStateTable. ShelfBusStateEntry .1.3.6.1.4.1.3764.1.1.30.13.3.10.1 |
shelfBusAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.13.3.10.1.1 |
shelfBusOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.13.3.10.1.2 |
shelfBusUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.13.3.10.1.3 |
shelfBusAvailabilityStatusIf supported by the component, this attribute indicates the OSI
Availability status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value inTest indicates that the resource is undergoing a test
procedure. If adminState is locked or shuttingDown, the normal
users are precluded from using the resource and controlStatus is
reservedForTest. Tests that do not exclude additional users can be
present in any operational or administrative state but the
reservedForTest condition should not be present.
The value failed indicates that the component has an internal fault
that prevents it from operating. The operationalState is disabled.
The value dependency indicates that the component cannot operate
because some other resource on which it depends is unavailable.
The operationalState is disabled.
The value powerOff indicates the resource requires power to be
applied and it is not powered on. The operationalState is disabled.
The value offLine indicates the resource requires a routine
operation (either manual, automatic, or both) to be performed to
place it on-line and make it available for use. The operationalState
is disabled.
The value offDuty indicates the resource is inactive in accordance
with a predetermined time schedule. In the absence of other
disabling conditions, the operationalState is enabled or disabled.
The value degraded indicates the service provided by the
component is degraded in some way, such as in speed or operating
capacity. However, the resource remains available for service. The
operationalState is enabled.
The value notInstalled indicates the resource is not present. The
operationalState is disabled.
The value logFull is not used.
Description of bits:
inTest(0)
failed(1)
powerOff(2)
offLine(3)
offDuty(4)
dependency(5)
degraded(6)
notInstalled(7)
logFull(8)ro OCTET STRING .1.3.6.1.4.1.3764.1.1.30.13.3.10.1.4 |
shelfBusProceduralStatusIf supported by the component, this attribute indicates the OSI
Procedural status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value initializationRequired indicates (for a resource which
doesn't initialize autonomously) that initialization is required before
it can perform its normal functions, and this procedure has not been
initiated. The operationalState is disabled.
The value notInitialized indicates (for a resource which does
initialize autonomously) that initialization is required before it can
perform its normal functions, and this procedure has not been
initiated. The operationalState may be enabled or disabled.
The value initializing indicates that initialization has been initiated
but is not yet complete. The operationalState may be enabled or
disabled.
The value reporting indicates the resource has completed some
processing operation and is notifying the results. The
operationalState is enabled.
The value terminating indicates the component is in a termination
phase. If the resource doesn't reinitialize autonomously,
operationalState is disabled; otherwise it is enabled or disabled.
Description of bits:
initializationRequired(0)
notInitialized(1)
initializing(2)
reporting(3)
terminating(4)ro OCTET STRING .1.3.6.1.4.1.3764.1.1.30.13.3.10.1.5 |
shelfBusControlStatusIf supported by the component, this attribute indicates the OSI
Control status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value subjectToTest indicates the resource is available but tests
may be conducted simultaneously at unpredictable times, which
may cause it to exhibit unusual characteristics.
The value partOfServicesLocked indicates that part of the service is
restricted from users of a resource. The adminState is unlocked.
The value reservedForTest indicates that the component is
administratively unavailable because it is undergoing a test
procedure. The adminState is locked.
The value suspended indicates that the service has been
administratively suspended.
Description of bits:
subjectToTest(0)
partOfServicesLocked(1)
reservedForTest(2)
suspended(3)ro OCTET STRING .1.3.6.1.4.1.3764.1.1.30.13.3.10.1.6 |
shelfBusAlarmStatusIf supported by the component, this attribute indicates the OSI
Alarm status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value underRepair indicates the component is currently being
repaired. The operationalState is enabled or disabled.
The value critical indicates one or more critical alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value major indicates one or more major alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value minor indicates one or more minor alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value alarmOutstanding generically indicates that an alarm of
some severity is outstanding against the component.
Description of bits:
underRepair(0)
critical(1)
major(2)
minor(3)
alarmOutstanding(4)ro OCTET STRING .1.3.6.1.4.1.3764.1.1.30.13.3.10.1.7 |
shelfBusStandbyStatusIf supported by the component, this attribute indicates the OSI
Standby status of the component.
The value notSet indicates that either the attribute is not supported
or that none of the status conditions described below are present.
Note that this is a non-standard value, used because the original
specification indicated this attribute was set-valued and thus, did not
provide a value to indicate that none of the other three are
applicable.
The value hotStandby indicates that the resource is not providing
service but will be immediately able to take over the role of the
resource to be backed up, without initialization activity, and
containing the same information as the resource to be backed up.
The value coldStandby indicates the resource is a backup for
another resource but will not be immediately able to take over the
role of the backed up resource and will require some initialization
activity.
The value providingService indicates that this component, as a
backup resource, is currently backing up another resource.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.13.3.10.1.8 |
shelfBusUnknownStatusThis attribute indicates the OSI Unknown status of the component.
The value false indicates that all of the other OSI State and Status
attribute values can be considered accurate.
The value true indicates that the actual state of the component is not
known for sure.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.13.3.10.1.9 |
shelfBusOperTableThis attribute group contains operational attributes of a bus. SEQUENCE OF ShelfBusOperEntry .1.3.6.1.4.1.3764.1.1.30.13.3.11 |
shelfBusOperEntryAn entry in the shelfBusOperTable. ShelfBusOperEntry .1.3.6.1.4.1.3764.1.1.30.13.3.11.1 |
shelfBusClockSourceThis attribute records the source of the fundamental clock signal
and end-of-cell synchronization signal used by the bus. It contains
one of the following values.
activeCP: the card which is the active control processor (CP) is
providing clock signals
alternate: the card at the opposite end of the module from the active
CP is providing clock signalsro Enumeration .1.3.6.1.4.1.3764.1.1.30.13.3.11.1.1 |
shelfBusUtilizationThis attribute records how much of the available bus bandwidth was
actually used during the most recently sampled 1 second interval.
The value is expressed as a percentage.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.13.3.11.1.2 |
shelfBusBusTapStatusTableThis attribute records the operability of each bus tap on the bus, as
reported by the associated BusTap component; the entries are
indexed by slot number of the card. Each entry contains one of the
following values.
ok: the bus tap is operational
failed: the bus tap has failed
none: the bus tap status is not availablethe associated BusTap
component does not currently exist SEQUENCE OF ShelfBusBusTapStatusEntry .1.3.6.1.4.1.3764.1.1.30.13.3.246 |
shelfBusBusTapStatusEntryAn entry in the shelfBusBusTapStatusTable. ShelfBusBusTapStatusEntry .1.3.6.1.4.1.3764.1.1.30.13.3.246.1 |
shelfBusBusTapStatusIndexThis variable represents the shelfBusBusTapStatusTable
specific index for the shelfBusBusTapStatusTable. Integer32 .1.3.6.1.4.1.3764.1.1.30.13.3.246.1.1 |
shelfBusBusTapStatusValueThis variable represents an individual value for the
shelfBusBusTapStatusTable.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.13.3.246.1.2 |
shelfBusClockSourceStatusTableThis vector attribute, indexed with activeCP or alternate, represents
the state of the bus clock sources. It can be set to one of the
following values:
ok: all operational cards can receive signals from the clock source.
failed: at least one operational card is unable to receive signals from
the clock source.
unknown: status of a clock source is unknown. To determine the
status of the clock source, a test must be run.
testInProgress: the clock source is currently being tested.
notApplicable: the LP state of the clock source's card is down or
not provisioned. SEQUENCE OF ShelfBusClockSourceStatusEntry .1.3.6.1.4.1.3764.1.1.30.13.3.247 |
shelfBusClockSourceStatusEntryAn entry in the shelfBusClockSourceStatusTable. ShelfBusClockSourceStatusEntry .1.3.6.1.4.1.3764.1.1.30.13.3.247.1 |
shelfBusClockSourceStatusIndexThis variable represents the shelfBusClockSourceStatusTable
specific index for the shelfBusClockSourceStatusTable. Enumeration .1.3.6.1.4.1.3764.1.1.30.13.3.247.1.1 |
shelfBusClockSourceStatusValueThis variable represents an individual value for the
shelfBusClockSourceStatusTable.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.13.3.247.1.2 |
shelfTest OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.13.4 |
shelfTestRowStatusTableThis entry controls the addition and deletion of
shelfTest components. SEQUENCE OF ShelfTestRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.13.4.1 |
shelfTestRowStatusEntryA single entry in the table represents a single
shelfTest component. ShelfTestRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.13.4.1.1 |
shelfTestRowStatusThis variable is used as the basis for SNMP naming of
shelfTest components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.13.4.1.1.1 |
shelfTestComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.13.4.1.1.2 |
shelfTestStorageTypeThis variable represents the storage type value for the
shelfTest tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.13.4.1.1.4 |
shelfTestIndexThis variable represents the index for the shelfTest tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.13.4.1.1.10 |
shelfTestProvTableThis group contains provisionable attributes of the Test component. SEQUENCE OF ShelfTestProvEntry .1.3.6.1.4.1.3764.1.1.30.13.4.10 |
shelfTestProvEntryAn entry in the shelfTestProvTable. ShelfTestProvEntry .1.3.6.1.4.1.3764.1.1.30.13.4.10.1 |
shelfTestAutomaticBusClockTestThis attribute specifies whether or not a bus clock source test is
automatically executed after a clock source's LP state changes, and
after failure or recovery of the active CP bus clock source. Since
tests of an alternate bus clock source may cause a minor loss of
traffic, the attribute is set to disabled by default.
If set to enabled, a bus clock source test is automatically executed.
If the status of the corresponding Shelf Bus clockSourceStatus is
changed after the test, an alarm is issued if the status is one of the
following: ok, failed, or unknown.
If set to disabled, no bus clock source test is automatically
executed. However, a test can be executed by the RUN command. If
the status is changed after the test, an alarm is issued if the status is
one of the following: ok, or failed.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.13.4.10.1.1 |
shelfTestSetupTableThis attribute group contains the attributes that govern the operation
of a shelf test. SEQUENCE OF ShelfTestSetupEntry .1.3.6.1.4.1.3764.1.1.30.13.4.11 |
shelfTestSetupEntryAn entry in the shelfTestSetupTable. ShelfTestSetupEntry .1.3.6.1.4.1.3764.1.1.30.13.4.11.1 |
shelfTestTypetype
The attribute determines the test to be executed when the RUN
command is applied to the component. Note that running a
busClock test may cause a minor loss of traffic.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.13.4.11.1.1 |
shelfTestResultsTableThis attribute group contains the results of the Shelf Test that is
currently running; if no test is running, the attribute group contains
the results of the most recently completed Shelf Test. The attributes
of the Results group are reset to their initial values whenever a
corresponding Shelf Test is run or the corresponding attribute of the
Setup group is set. SEQUENCE OF ShelfTestResultsEntry .1.3.6.1.4.1.3764.1.1.30.13.4.12 |
shelfTestResultsEntryAn entry in the shelfTestResultsTable. ShelfTestResultsEntry .1.3.6.1.4.1.3764.1.1.30.13.4.12.1 |
shelfTestBusClockTestResultbusClockTestResult
This attribute records the result of the bus clock manual test. The
result can be one of the following values.
pass : the test passed
fail : the test failed
noTest : the test was not executed when RUN command is issued,
because the shelf was in single bus mode.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.13.4.12.1.1 |
shelfProvTableThis group contains the provisionable attributes for the Shelf
component. SEQUENCE OF ShelfProvEntry .1.3.6.1.4.1.3764.1.1.30.13.10 |
shelfProvEntryAn entry in the shelfProvTable. ShelfProvEntry .1.3.6.1.4.1.3764.1.1.30.13.10.1 |
shelfCommentTextThis is an arbitrary string that can be used to specify the location of
the module. It is not used by the system.rw AsciiString .1.3.6.1.4.1.3764.1.1.30.13.10.1.1 |
shelfOperTableThis group contains the operational attributes for the Shelf
component. SEQUENCE OF ShelfOperEntry .1.3.6.1.4.1.3764.1.1.30.13.11 |
shelfOperEntryAn entry in the shelfOperTable. ShelfOperEntry .1.3.6.1.4.1.3764.1.1.30.13.11.1 |
shelfBusOperatingModeThis attribute indicates the current backplane bus operating mode:
noBus No bus is in service now.
singleBusX The shelf is running on bus X only.
singleBusY The shelf is running on bus Y only.
dualBus The shelf is running on bus X and bus Y.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.13.11.1.1 |
shelfHardwareFailuresThe hardware's fault detection system can report four kinds of
component failures: card, power converter, cooling unit or
terminator card failures. This attribute is a set that specifies which
type of components have failed.
Description of bits:
card(0)
powerConverter(1)
coolingUnit(2)
terminatorCard(3)ro OCTET STRING .1.3.6.1.4.1.3764.1.1.30.13.11.1.2 |
shelfNumberOfSlotsThis attribute specifies the number of slots for this shelf.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.13.11.1.3 |
mod OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.16 |
modRowStatusTableThis entry controls the addition and deletion of
mod components. SEQUENCE OF ModRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.16.1 |
modRowStatusEntryA single entry in the table represents a single
mod component. ModRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.16.1.1 |
modRowStatusThis variable is used as the basis for SNMP naming of
mod components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.16.1.1.1 |
modComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.16.1.1.2 |
modStorageTypeThis variable represents the storage type value for the
mod tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.16.1.1.4 |
modIndexThis variable represents the index for the mod tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.16.1.1.10 |
modProvTableMod Provisionable
This group provides attributes that are used by internal and external
systems to identify the module. SEQUENCE OF ModProvEntry .1.3.6.1.4.1.3764.1.1.30.16.10 |
modProvEntryAn entry in the modProvTable. ModProvEntry .1.3.6.1.4.1.3764.1.1.30.16.10.1 |
modNodeIdThe nodeId is a number that uniquely identifies a Magellan Passport
module in a Passport network.
Changing the value of the nodeId will cause the node to restart.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.16.10.1.1 |
modNodeNameThe nodeName is a 12 character ASCII string that is unique to every
Passport module in a Passport network. This name is the component
instance value of EM - the root of the Passport component
hierarchy. It has, therefore, the same restriction and behaviour as
any ascii string instance value, e.g., it is converted to upper case.
Note that the EM component is typically suppressed on output.
Changing the value of the nodeName will cause the node to restart.rw AsciiString .1.3.6.1.4.1.3764.1.1.30.16.10.1.2 |
modNamsIdThis attribute stores the Network Administration (Nams) Identifier
associated with the Passport node. It must be unique across the
entire network of Passport nodes supporting the transport of DPN
traffic as well as all RMs and AMs in the network.
The namsId must be set when a DpnAddressPlan component is
configured on an Passport node.
The namsId is used in the accounting record, statistics record and in
time change accounting record and identifies nodes in these records.
The Nams Id is to be assigned by the network administrator.
Value 49151 indicates that no Nams Id was assigned to the module.
Changing the value of the namsId will cause the node to restart.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.16.10.1.3 |
modRegionIdThis attribute identifies the Topology Region to which the node
belongs. Nodes will only exchange topological information with
connected nodes in the same region.
The default value of 0 indicates that no regionId has been assigned
to the module. A module using the default regionId belongs to the
same region as the first neighbour which stages with it using a non-
zero regionId. If another neighbour tries to stage using a different
non-zero regionId, the trunk will not be allowed to come up.
Changing the value of the regionId will cause the node to restart.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.16.10.1.4 |
modNodePrefixThis attribute specifies an NSAP prefix which is distributed to all
other Passport nodes within a Topology region and by which this
node can be identified. This prefix is used by PORS, PNNI routing,
and Data Shunts.
PORS calls that use NSAP addressing (for example, CES) will look
for the node with the longest NSAP prefix that matches the called
party address. The NSAP prefixes that PORS matches against are
the nodePrefix and the alternatePorsPrefixes.
PNNI forms the default value of the nodeAddressPrefix under the
AtmPnni component with this NSAP prefix followed by a unique
MAC address.
Data Shunts uses the nodePrefix to form an NSAP address that is
registered with the Networking API. This NSAP address is used to
identify this node when establishing a Data Shunt.
The value entered must be 26 characters long. All characters must
be hexadecimal with the following restrictions:
- the first two characters must be either '39', '45', or '47'
- if the first two characters are '45', the 18th character must be an
'f' or an 'F'rw AsciiString .1.3.6.1.4.1.3764.1.1.30.16.10.1.5 |
modNodePrefixesTableThis attribute specifies five different NSAP prefixes which are
distributed to all other Passport nodes within a Topology region and
by which this node can be identified. PORS calls that use NSAP
addressing (for example, CES) will look for the node with the
longest NSAP prefix that matches the called party address. The
default value of the nodeAddressPrefix under the AtmPnni
component is formed by the first NSAP prefix followed by a unique
MAC address. Each NSAP prefix may contain 40 hexadecimal
characters with the exception of the first prefix which has a
maximum length of 26 chracacters.
This attribute was never deployed and will be removed prior to Gate
2..obsolete SEQUENCE OF ModNodePrefixesEntry .1.3.6.1.4.1.3764.1.1.30.16.338 |
modNodePrefixesEntryAn entry in the modNodePrefixesTable.obsolete ModNodePrefixesEntry .1.3.6.1.4.1.3764.1.1.30.16.338.1 |
modNodePrefixesIndexThis variable represents the modNodePrefixesTable
specific index for the modNodePrefixesTable.obsolete Integer32 .1.3.6.1.4.1.3764.1.1.30.16.338.1.1 |
modNodePrefixesValueThis variable represents an individual value for the
modNodePrefixesTable.rwobsolete AsciiString .1.3.6.1.4.1.3764.1.1.30.16.338.1.2 |
modAlternatePorsPrefixesTableThis attribute specifies four NSAP prefixes which are distributed to
all other Passport nodes within a Topology region and by which this
node can be identified. These prefixes are used by PORS.
PORS calls that use NSAP addressing (for example, CES) will look
for the node with the longest NSAP prefix that matches the called
party address. The NSAP prefixes that PORS matches against are
the alternatePorsPrefixes and the nodePrefix.
These prefixes may contain up to 40 hexadecimal characters. SEQUENCE OF ModAlternatePorsPrefixesEntry .1.3.6.1.4.1.3764.1.1.30.16.405 |
modAlternatePorsPrefixesEntryAn entry in the modAlternatePorsPrefixesTable. ModAlternatePorsPrefixesEntry .1.3.6.1.4.1.3764.1.1.30.16.405.1 |
modAlternatePorsPrefixesIndexThis variable represents the modAlternatePorsPrefixesTable
specific index for the modAlternatePorsPrefixesTable. Integer32 .1.3.6.1.4.1.3764.1.1.30.16.405.1.1 |
modAlternatePorsPrefixesValueThis variable represents an individual value for the
modAlternatePorsPrefixesTable.rw AsciiString .1.3.6.1.4.1.3764.1.1.30.16.405.1.2 |