NTWS-PORT-MIB
Imported Objects
Objects
14 total| Object Name |
|---|
ntwsPortMibPort information MIB. Copyright 2008 Nortel Networks. All rights reserved. This Nortel Networks SNMP Management Information Base Specification (Specification) embodies Nortel Networks' confidential and proprietary intellectual property. This Specification is supplied 'AS IS' and Nortel Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. MODULE-IDENTITY .1.3.6.1.4.1.45.6.1.4.6 |
ntwsPortObjects OBJECT IDENTIFIER .1.3.6.1.4.1.45.6.1.4.6.1 |
ntwsPortDataObjects OBJECT IDENTIFIER .1.3.6.1.4.1.45.6.1.4.6.1.1 |
ntwsPortConfigTablePort configuration table SEQUENCE OF NtwsPortConfigEntry .1.3.6.1.4.1.45.6.1.4.6.1.1.1 |
ntwsPortConfigEntryPort configuration entry NtwsPortConfigEntry .1.3.6.1.4.1.45.6.1.4.6.1.1.1.1 |
ntwsPortConfigPortNumberPhysical Port Number NtwsPhysPortNumber (NTWS-BASIC-TC) .1.3.6.1.4.1.45.6.1.4.6.1.1.1.1.1 |
ntwsPortConfigPortModeIndicates whether this port is configured for directly attached AP, as network port, or for wired auth.ro NtwsPortMode .1.3.6.1.4.1.45.6.1.4.6.1.1.1.1.2 |
ntwsPortConfigPoeModeIndicates whether this port is configured to supply PoE (Power over Ethernet).ro NtwsPortPoeMode .1.3.6.1.4.1.45.6.1.4.6.1.1.1.1.3 |
ntwsPortConfigTrunkMasterThe master port of the group this port belongs to (identified by the physical port number). A zero value means information is not available (usually if this port is not part of any port group).ro NtwsPhysPortNumberOrZero (NTWS-BASIC-TC) .1.3.6.1.4.1.45.6.1.4.6.1.1.1.1.4 |
ntwsPortConformance OBJECT IDENTIFIER .1.3.6.1.4.1.45.6.1.4.6.1.2 |
ntwsPortCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.45.6.1.4.6.1.2.1 |
ntwsPortComplianceThe compliance statement for devices that implement the Port MIB. Unknown .1.3.6.1.4.1.45.6.1.4.6.1.2.1.1 |
ntwsPortGroups OBJECT IDENTIFIER .1.3.6.1.4.1.45.6.1.4.6.1.2.2 |
ntwsPortConfigGroupMandatory group of objects implemented to provide Port configuration info. Unknown .1.3.6.1.4.1.45.6.1.4.6.1.2.2.1 |
More MIBs from Synoptics
Browse all SynopticsMIBs →SNMP MIB module
Standard SNMP MIB module defining data structures for SYNOPTICS-BASIC-ETHTOK-MIB.
Standard SNMP MIB module defining data structures for SYNOPTICS-ETHERNET-MIB.
The NTWS-AP-STATUS-MIB enables SNMP-based monitoring of Access Point operational states and connectivity metrics on Nortel Networks wireless switches (Access Controllers). It provides specific management objects for tracking the status, association, and performance indicators of wireless Access Points managed by the switch's agent.
The NTWS-AP-CONFIG-MIB enables SNMP-based configuration management of Access Point parameters on Nortel Networks wireless switches (Access Controllers), specifically exposing objects for SSID settings, radio channel assignments, transmit power levels, and security policy definitions. This module allows centralized controllers to retrieve and modify the operational state of associated lightweight access points without requiring direct agent interaction on the AP hardware.
The NTWS-TRAP-MIB module defines SNMP notification objects for Nortel Networks wireless switches (Access Controllers) to report critical operational events and fault conditions for associated Access Points. These notifications enable network management systems to detect and respond to specific wireless infrastructure anomalies, such as AP connectivity loss, controller failures, or configuration state changes.