NTWS-EXTERNAL-SERVER-MIB
The NTWS-EXTERNAL-SERVER-MIB provides SNMP management capabilities for configuring and monitoring external server parameters within Nortel Networks enterprise networking equipment. It exposes specific configuration objects and status metrics required to define and maintain connections to external server infrastructure, such as authentication or proxy servers, integrated into the device's operational logic.
Imported Objects
Objects
14 total| Object Name |
|---|
ntwsExternalServerMibExternal Server configuration MIB. Copyright 2008 Nortel Networks. All rights reserved. This Nortel Networks SNMP Management Information Base Specification (Specification) embodies Nortel Networks' confidential and proprietary intellectual property. This Specification is supplied 'AS IS' and Nortel Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. MODULE-IDENTITY .1.3.6.1.4.1.45.6.1.4.7 |
ntwsExternalServerObjects OBJECT IDENTIFIER .1.3.6.1.4.1.45.6.1.4.7.1 |
ntwsExternalServerDataObjects OBJECT IDENTIFIER .1.3.6.1.4.1.45.6.1.4.7.1.1 |
ntwsExtServerSyslogTableConfigured Syslog server table. SEQUENCE OF NtwsExtServerSyslogEntry .1.3.6.1.4.1.45.6.1.4.7.1.1.1 |
ntwsExtServerSyslogEntryEntry for Syslog server table. NtwsExtServerSyslogEntry .1.3.6.1.4.1.45.6.1.4.7.1.1.1.1 |
ntwsExtServerSyslogIndexIndex of the Syslog sever Unsigned32 .1.3.6.1.4.1.45.6.1.4.7.1.1.1.1.1 |
ntwsExtServerSyslogAddressIP Address of the Syslog server.ro IpAddress .1.3.6.1.4.1.45.6.1.4.7.1.1.1.1.2 |
ntwsExtServerSyslogPortThe Syslog server Port number.ro NtwsIpPort (NTWS-BASIC-TC) .1.3.6.1.4.1.45.6.1.4.7.1.1.1.1.3 |
ntwsExtServerSyslogEnableThe administrative status of the Syslog server (enabled/disabled)ro NtwsSyslogServerEnable .1.3.6.1.4.1.45.6.1.4.7.1.1.1.1.4 |
ntwsExternalServerConformance OBJECT IDENTIFIER .1.3.6.1.4.1.45.6.1.4.7.1.2 |
ntwsExternalServerCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.45.6.1.4.7.1.2.1 |
ntwsExternalServerComplianceThe compliance statement for devices that implement the External Server MIB. Unknown .1.3.6.1.4.1.45.6.1.4.7.1.2.1.1 |
ntwsExternalServerGroups OBJECT IDENTIFIER .1.3.6.1.4.1.45.6.1.4.7.1.2.2 |
ntwsExternalServerConfigGroupMandatory group of objects implemented to provide External Server configuration info. Unknown .1.3.6.1.4.1.45.6.1.4.7.1.2.2.1 |
More MIBs from Synoptics
Browse all SynopticsMIBs →SNMP MIB module
Standard SNMP MIB module defining data structures for SYNOPTICS-BASIC-ETHTOK-MIB.
Standard SNMP MIB module defining data structures for SYNOPTICS-ETHERNET-MIB.
The NTWS-AP-STATUS-MIB enables SNMP-based monitoring of Access Point operational states and connectivity metrics on Nortel Networks wireless switches (Access Controllers). It provides specific management objects for tracking the status, association, and performance indicators of wireless Access Points managed by the switch's agent.
The NTWS-AP-CONFIG-MIB enables SNMP-based configuration management of Access Point parameters on Nortel Networks wireless switches (Access Controllers), specifically exposing objects for SSID settings, radio channel assignments, transmit power levels, and security policy definitions. This module allows centralized controllers to retrieve and modify the operational state of associated lightweight access points without requiring direct agent interaction on the AP hardware.
The NTWS-TRAP-MIB module defines SNMP notification objects for Nortel Networks wireless switches (Access Controllers) to report critical operational events and fault conditions for associated Access Points. These notifications enable network management systems to detect and respond to specific wireless infrastructure anomalies, such as AP connectivity loss, controller failures, or configuration state changes.