NTWS-AP-UNCONFIGURED-MIB
The NTWS-AP-UNCONFIGURED-MIB enables Nortel Networks wireless switches to monitor and report the status of unconfigured or orphan Access Points detected by the local Access Controller. This module provides visibility into APs currently discovered by the controller but not yet associated with any active management domain, facilitating the identification of devices awaiting provisioning.
Imported Objects
Objects
15 total| Object Name |
|---|
ntwsApUnconfiguredMibUnconfigured/orphan APs info for Nortel Networks wireless switches. AP = Access Point; AC = Access Controller (wireless switch), the device that runs a SNMP Agent implementing this MIB. Orphan AP = an AP currently detected by this AC but not managed by any AC. Copyright 2008 Nortel Networks. All rights reserved. This Nortel Networks SNMP Management Information Base Specification (Specification) embodies Nortel Networks' confidential and proprietary intellectual property. This Specification is supplied 'AS IS' and Nortel Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. MODULE-IDENTITY .1.3.6.1.4.1.45.6.1.4.15 |
ntwsApUnconfMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.45.6.1.4.15.1 |
ntwsApUnconfOrphanTableA table describing all the APs currently detected by this AC but not managed by any AC. Such APs are reported as ''unconfigured'' or ''orphan'' in other management interfaces of the AC (CLI, Web etc). SEQUENCE OF NtwsApUnconfOrphanEntry .1.3.6.1.4.1.45.6.1.4.15.1.2 |
ntwsApUnconfOrphanEntryInformation about a particular orphan AP detected by this AC. NtwsApUnconfOrphanEntry .1.3.6.1.4.1.45.6.1.4.15.1.2.1 |
ntwsApUnconfOrphanApSerialNumThe Serial Number of this orphan AP. NtwsApSerialNum (NTWS-AP-TC) .1.3.6.1.4.1.45.6.1.4.15.1.2.1.1 |
ntwsApUnconfOrphanApModelNameThe Model name of this orphan AP.ro DisplayString .1.3.6.1.4.1.45.6.1.4.15.1.2.1.2 |
ntwsApUnconfOrphanIpAddressThe IPv4 Address of this orphan AP.ro IpAddress .1.3.6.1.4.1.45.6.1.4.15.1.2.1.5 |
ntwsApUnconfOrphanPhysPortNumThe Number of the Physical Port on which this orphan AP was detected by the AC (usually the uplink port going to other switches/routers connecting this AP to the network).ro NtwsPhysPortNumber (NTWS-BASIC-TC) .1.3.6.1.4.1.45.6.1.4.15.1.2.1.6 |
ntwsApUnconfOrphanVLANNameIdentifies the VLAN containing this orphan AP. This is the VLAN Name as configured on this AC (another AC might have a different name corresponding to same VLAN tag used in the network).ro DisplayString .1.3.6.1.4.1.45.6.1.4.15.1.2.1.7 |
ntwsApUnconfOrphanReasonThe reason why this AP is orphan.ro NtwsApUnconfiguredOrphanReason .1.3.6.1.4.1.45.6.1.4.15.1.2.1.8 |
ntwsApUnconfConformance OBJECT IDENTIFIER .1.3.6.1.4.1.45.6.1.4.15.2 |
ntwsApUnconfCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.45.6.1.4.15.2.1 |
ntwsApUnconfComplianceThe compliance statement for devices that implement AP Unconfigured MIB. Unknown .1.3.6.1.4.1.45.6.1.4.15.2.1.1 |
ntwsApUnconfGroups OBJECT IDENTIFIER .1.3.6.1.4.1.45.6.1.4.15.2.2 |
ntwsApUnconfOrphanBasicGroupMandatory group of objects implemented to provide info about Orphan APs. Unknown .1.3.6.1.4.1.45.6.1.4.15.2.2.1 |
More MIBs from Synoptics
Browse all SynopticsMIBs →SNMP MIB module
Standard SNMP MIB module defining data structures for SYNOPTICS-BASIC-ETHTOK-MIB.
Standard SNMP MIB module defining data structures for SYNOPTICS-ETHERNET-MIB.
The NTWS-AP-STATUS-MIB enables SNMP-based monitoring of Access Point operational states and connectivity metrics on Nortel Networks wireless switches (Access Controllers). It provides specific management objects for tracking the status, association, and performance indicators of wireless Access Points managed by the switch's agent.
The NTWS-AP-CONFIG-MIB enables SNMP-based configuration management of Access Point parameters on Nortel Networks wireless switches (Access Controllers), specifically exposing objects for SSID settings, radio channel assignments, transmit power levels, and security policy definitions. This module allows centralized controllers to retrieve and modify the operational state of associated lightweight access points without requiring direct agent interaction on the AP hardware.
The NTWS-TRAP-MIB module defines SNMP notification objects for Nortel Networks wireless switches (Access Controllers) to report critical operational events and fault conditions for associated Access Points. These notifications enable network management systems to detect and respond to specific wireless infrastructure anomalies, such as AP connectivity loss, controller failures, or configuration state changes.