NTWS-AP-IF-MIB
The NTWS-AP-IF-MIB enables SNMP-based monitoring and management of Access Point network interface statistics and operational states on Nortel Networks wireless switches (Access Controllers). This module provides specific metrics for tracking AP interface status, traffic counters, and link performance to facilitate centralized wireless infrastructure administration.
Imported Objects
Objects
16 total| Object Name |
|---|
ntwsApIfMibAP network Interface objects for Nortel Networks wireless switches. AP = Access Point; AC = Access Controller (wireless switch), the device that runs a SNMP Agent implementing this MIB. Copyright 2009 Nortel Networks. All rights reserved. This Nortel Networks SNMP Management Information Base Specification (Specification) embodies Nortel Networks' confidential and proprietary intellectual property. This Specification is supplied 'AS IS' and Nortel Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. MODULE-IDENTITY .1.3.6.1.4.1.45.6.1.4.16 |
ntwsApIfMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.45.6.1.4.16.1 |
ntwsApIfTableA table describing the network interfaces on all the APs currently present and managed by this AC (APs in ''ALIVE'' state). SEQUENCE OF NtwsApIfEntry .1.3.6.1.4.1.45.6.1.4.16.1.1 |
ntwsApIfEntryInformation about a particular network interface on an AP attached to the AC. NtwsApIfEntry .1.3.6.1.4.1.45.6.1.4.16.1.1.1 |
ntwsApIfApSerialNumThe Serial Number of the AP containing this network interface. NtwsApSerialNum (NTWS-AP-TC) .1.3.6.1.4.1.45.6.1.4.16.1.1.1.1 |
ntwsApIfIndexA unique value, greater than zero, for each AP network interface. NtwsApInterfaceIndex .1.3.6.1.4.1.45.6.1.4.16.1.1.1.2 |
ntwsApIfNameThe textual name of the interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.45.6.1.4.16.1.1.1.3 |
ntwsApIfTypeThe type of AP network interfaces.ro IANAifType (IANAifType-MIB) .1.3.6.1.4.1.45.6.1.4.16.1.1.1.4 |
ntwsApIfMtuThe size of the largest packet which can be sent/received on the interface, specified in octets.ro Unsigned32 .1.3.6.1.4.1.45.6.1.4.16.1.1.1.5 |
ntwsApIfHighSpeedThe nominal bandwidth of AP network interfaces in units of 1,000,000 bits per second.ro Gauge32 .1.3.6.1.4.1.45.6.1.4.16.1.1.1.6 |
ntwsApIfMacThe MAC address of this network interface.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.45.6.1.4.16.1.1.1.7 |
ntwsApIfConformance OBJECT IDENTIFIER .1.3.6.1.4.1.45.6.1.4.16.2 |
ntwsApIfCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.45.6.1.4.16.2.1 |
ntwsApIfComplianceThe compliance statement for devices that implement AP If MIB. This compliance statement is for releases 7.1 and greater of AC (wireless switch) software. Unknown .1.3.6.1.4.1.45.6.1.4.16.2.1.1 |
ntwsApIfGroups OBJECT IDENTIFIER .1.3.6.1.4.1.45.6.1.4.16.2.2 |
ntwsApIfBasicGroupGroup of columnar objects implemented to provide basic Interface info in releases 7.1 and greater. Unknown .1.3.6.1.4.1.45.6.1.4.16.2.2.1 |
More MIBs from Synoptics
Browse all SynopticsMIBs →SNMP MIB module
Standard SNMP MIB module defining data structures for SYNOPTICS-BASIC-ETHTOK-MIB.
Standard SNMP MIB module defining data structures for SYNOPTICS-ETHERNET-MIB.
The NTWS-AP-STATUS-MIB enables SNMP-based monitoring of Access Point operational states and connectivity metrics on Nortel Networks wireless switches (Access Controllers). It provides specific management objects for tracking the status, association, and performance indicators of wireless Access Points managed by the switch's agent.
The NTWS-AP-CONFIG-MIB enables SNMP-based configuration management of Access Point parameters on Nortel Networks wireless switches (Access Controllers), specifically exposing objects for SSID settings, radio channel assignments, transmit power levels, and security policy definitions. This module allows centralized controllers to retrieve and modify the operational state of associated lightweight access points without requiring direct agent interaction on the AP hardware.
The NTWS-TRAP-MIB module defines SNMP notification objects for Nortel Networks wireless switches (Access Controllers) to report critical operational events and fault conditions for associated Access Points. These notifications enable network management systems to detect and respond to specific wireless infrastructure anomalies, such as AP connectivity loss, controller failures, or configuration state changes.