NNCGNI00X8-MIB
Standard SNMP MIB module defining data structures for NNCGNI00X8-MIB.
Imported Objects
Objects
18 total| Object Name |
|---|
RFC1155-SMIConfiguration information for the Rptr modules
in the system SEQUENCE OF NncExtRptrModuleEntry .1.3.6.1.4.1.123.3.11.1 |
nncExtRptrPortTableConfiguration information for the repeater ports
in the system SEQUENCE OF NncExtRptrPortEntry .1.3.6.1.4.1.123.3.11.2 |
nncExtRptrPortEntryConfiguration information for a repeater ports NncExtRptrPortEntry .1.3.6.1.4.1.123.3.11.2.1 |
nncExtRptrPortPositionIndexThe position index of the Port of interestro PositionIndex .1.3.6.1.4.1.123.3.11.2.1.1 |
nncExtRptrPortIndexThe port number on the position of the port
of interest.ro PortIndex .1.3.6.1.4.1.123.3.11.2.1.2 |
nncExtRptrPortAlarmEnableWhether or not an alarm should be generated on
a loss of link event.rw Enumeration .1.3.6.1.4.1.123.3.11.2.1.3 |
nncExtRptrPortLinkIntegrityLossesThe number of times link integrity has been lost.ro Counter .1.3.6.1.4.1.123.3.11.2.1.4 |
nncExtRptrPortAutoPartitionsThe number of times the port has been
auto-partitioned.ro Counter .1.3.6.1.4.1.123.3.11.2.1.5 |
nncExtRptrPortAdminDisablesThe number of times the port has been disabled
at the request of a management entity.ro Counter .1.3.6.1.4.1.123.3.11.2.1.6 |
nncExtRptrPortEventsThe number of times an event matching any of the
events described by ...ModuleStatisticsMask has
occurred on this portro Counter .1.3.6.1.4.1.123.3.11.2.1.7 |
nncExtRptrPortLastChangeThe last time rptrPortOperStatus changed for
this port.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.123.3.11.2.1.8 |
nncExtRptrPortOperStatusThe current state of this repeater portro Enumeration .1.3.6.1.4.1.123.3.11.2.1.9 |
nncExtRptrPortIsolationrw Enumeration .1.3.6.1.4.1.123.3.11.2.1.10 |
nncExtRptrModuleEntryConfiguration information for a Rptr module NncExtRptrModuleEntry .nncExtRptrModuleTable.1 |
nncExtRptrModulePositionIndexThe position index of the module of interestro PositionIndex .nncExtRptrModuleTable.1.1 |
nncExtRptrModuleAdminModeWhether the module should try to operate as a
repeater or cascade module. The actual mode,
which depends on the installed modules, is
reported in nncExtRptrModuleOperModerw Enumeration .nncExtRptrModuleTable.1.2 |
nncExtRptrModuleOperModeWhat mode the module is operating in.ro Enumeration .nncExtRptrModuleTable.1.3 |
nncExtRptrModuleStatisticsMaskThe statistics to be collected, represented as a sum.
The bit positions are defined as:
Bit Name Meaning
0 Jabber Protection
1 Elastic Buffer Error
2 Phase Lock Error
3 Non SFD Packet
4 Pygmy Packet Reception A runt packet
5 Packet Reception
6 Partition
7 Bad Link
8 ROR
9 FWF
10 Not Used
11 Transmit Collision
12 Receive Collision
13 Out of Window Collosion
14 Not Used
15 Not Usedrw INTEGER .nncExtRptrModuleTable.1.4 |
More MIBs from Newbridge
Browse all NewbridgeMIBs →The NNCEXTCALLROUTINGSTATS-MIB monitors performance and fault metrics for ATM PNNI and static routing on Nortel (now Avaya) NNCE (Network Node Control Element) hardware, specifically tracking call setup success rates, crankback events, DTL generation, and bandwidth allocation failures across non-border and border nodes. It provides granular, interval-based counters for routing table descriptors to distinguish between originating, transiting, and terminating call states, enabling the detection of routing loops, CAC failures, and re-routing efficiency within the PNNI domain.
The NNCFRINTSTATISTICS-MIB module enables performance monitoring of Frame Relay stream traffic on Cisco devices by exposing interface-level counters for data transmission, reception, and error statistics. This MIB facilitates the tracking of Frame Relay-specific metrics such as CIR, FECN, BECN, and discard counts to assess link health and throughput efficiency.
SNMP MIB module
SNMP MIB module
The NNCEXTSVCSIGSTATS-MIB module provides performance monitoring counters for Asynchronous Transfer Mode (ATM) Switched Virtual Circuit (SVC) signaling functions, specifically tracking the establishment, maintenance, and teardown of signaling sessions within Cisco's Network Control and Management Environment (NCME). It enables administrators to quantify signaling traffic volume, error rates, and session state transitions to diagnose connectivity issues and validate SVC provisioning on ATM-based network infrastructure.
The NNC-ATM-STATISTICS-MIB enables performance monitoring of Asynchronous Transfer Mode (ATM) Virtual Path Links (VPL), Virtual Channel Links (VCL), and Virtual Path Aggregations (VPA) by tracking cell counts, OAM cell statistics, and error metrics across 15-minute and 1-hour historical intervals. This module facilitates granular traffic analysis and fault detection on ATM hardware by providing current and interval-based counters for valid, admitted, and idle cells aligned to wall-clock time boundaries.