NNCEXTE3-MIB
AI MIB Summary
The NNCEXTE3-MIB extends RFC 1407 to monitor and manage E3 line interface statistics, including error counts and signal status, on Newbridge (Nortel) networking hardware. This module provides vendor-specific object definitions for supervising the physical layer performance and fault conditions of E3 digital transmission links.
This module contains definitions for Newbridge extensions to E3 objects. It is used as a supplement to rfc1407.
Main OID:
nncExtE3.1.3.6.1.4.1.123.3.40
44
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
44 total| Object Name |
|---|
nncExtE3This module contains definitions for Newbridge extensions to E3 objects. It is used as a supplement to rfc1407. MODULE-IDENTITY .1.3.6.1.4.1.123.3.40 |
nncExtE3Objects OBJECT IDENTIFIER .1.3.6.1.4.1.123.3.40.1 |
nncExtE3Current15MinTableNNC Extension to dsx3CurrentTable. SEQUENCE OF NncExtE3Current15MinEntry .1.3.6.1.4.1.123.3.40.1.1 |
nncExtE3Current15MinEntryAn entry in nncExtE3Current15MinTable. NncExtE3Current15MinEntry .1.3.6.1.4.1.123.3.40.1.1.1 |
nncExtE3Current15MinESsThe counter associated with the number of Path Errored Seconds encountered by a E3 interface in the current 15 minute interval. This counts the seconds containing one or more BIP errors, one or more LOF defects, one or more LOS defects, or a detected incoming AIS. This counter is valid when an interface is configured for Direct cell mapping. When an interface is configured for PLCP cell mapping, the counter returns the last valid count when the port is in the Direct mode.ro Gauge32 .1.3.6.1.4.1.123.3.40.1.1.1.1 |
nncExtE3Current15MinSESsThe counter associated with the number of Path Severely Errored Seconds encountered by a E3 interface in the current 15 minute interval. This counts the seconds containing 34 or more BIP errors, one or more LOF defects, one or more LOS defects, or a detected incoming AIS. This counter is valid when an interface is configured for Direct cell mapping. When an interface is configured for PLCP cell mapping, the counter returns the last valid count when the port is in the Direct mode.ro Gauge32 .1.3.6.1.4.1.123.3.40.1.1.1.2 |
nncExtE3Current15MinSEFsThe counter associated with the number of Path Severely Errored Frames encountered by a E3 interface in the current 15 minute interval. This counts framing pattern errors. In Direct cell mapping mode, this is the count of frames with errored FA1/FA2 bytes in the G.832 overhead. In PLCP mode, this is the count of frames with an errored G.751 Frame Alignment byte.ro Gauge32 .1.3.6.1.4.1.123.3.40.1.1.1.3 |
nncExtE3Interval15MinTableNNC Extension to dsx3IntervalTable. SEQUENCE OF NncExtE3Interval15MinEntry .1.3.6.1.4.1.123.3.40.1.2 |
nncExtE3Interval15MinEntryAn entry in nncExtE3Interval15MinTable. NncExtE3Interval15MinEntry .1.3.6.1.4.1.123.3.40.1.2.1 |
nncExtE3Interval15MinNumberA number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that all 96 intervals are valid). Integer32 .1.3.6.1.4.1.123.3.40.1.2.1.1 |
nncExtE3Interval15MinESsThe counter associated with the number of Path Errored Seconds encountered by a E3 interface in one of the previous 15 minute intervals. This counts the seconds containing one or more BIP errors, one or more LOF defects, one or more LOS defects, or a detected incoming AIS. This counter is valid when an interface is configured for Direct cell mapping. When an interface is configured for PLCP cell mapping, the counter returns the last valid count when the port is in the Direct mode.ro Gauge32 .1.3.6.1.4.1.123.3.40.1.2.1.2 |
nncExtE3Interval15MinSESsThe counter associated with the number of Path Severely Errored Seconds encountered by a E3 interface in one of the previous 15 minute intervals. This counts the seconds containing 34 or more BIP errors, one or more LOF defects, one or more LOS defects, or a detected incoming AIS. This counter is valid when an interface is configured for Direct cell mapping. When an interface is configured for PLCP cell mapping, the counter returns the last valid count when the port is in the Direct mode.ro Gauge32 .1.3.6.1.4.1.123.3.40.1.2.1.3 |
nncExtE3Interval15MinSEFsThe counter associated with the number of Path Severely Errored Frames encountered by a E3 interface in one of the previous 15 minute intervals. This counts framing pattern errors. In Direct cell mapping mode, this is the count of frames with errored FA1/FA2 bytes in the G.832 overhead. In PLCP mode, this is the count of frames with an errored G.751 Frame Alignment byte.ro Gauge32 .1.3.6.1.4.1.123.3.40.1.2.1.4 |
nncExtE3Total24HrTableNNC Extension to dsx3TotalTable. SEQUENCE OF NncExtE3Total24HrEntry .1.3.6.1.4.1.123.3.40.1.3 |
nncExtE3Total24HrEntryAn entry in nncExtE3Total24HrTable. NncExtE3Total24HrEntry .1.3.6.1.4.1.123.3.40.1.3.1 |
nncExtE3Total24HrESsThe counter associated with the number of Path Errored Seconds encountered by a E3 interface in the previous 24 hours interval. This counts the seconds containing one or more BIP errors, one or more LOF defects, one or more LOS defects, or a detected incoming AIS. This counter is valid when an interface is configured for Direct cell mapping. When an interface is configured for PLCP cell mapping, the counter returns the last valid count when the port is in the Direct mode.ro Gauge32 .1.3.6.1.4.1.123.3.40.1.3.1.1 |
nncExtE3Total24HrSESsThe counter associated with the number of Path Severely Errored Seconds encountered by a E3 interface in the previous 24 hours interval. This counts the seconds containing 34 or more BIP errors, one or more LOF defects, one or more LOS defects, or a detected incoming AIS. This counter is valid when an interface is configured for Direct cell mapping. When an interface is configured for PLCP cell mapping, the counter returns the last valid count when the port is in the Direct mode.ro Gauge32 .1.3.6.1.4.1.123.3.40.1.3.1.2 |
nncExtE3Total24HrSEFsThe counter associated with the number of Path Severely Errored Frames encountered by a E3 interface in the previous 24 hours interval. This counts framing pattern errors. In Direct cell mapping mode, this is the count of frames with errored FA1/FA2 bytes in the G.832 overhead. In PLCP mode, this is the count of frames with an errored G.751 Frame Alignment byte.ro Gauge32 .1.3.6.1.4.1.123.3.40.1.3.1.3 |
nncExtE3FarEndCurrent15MinTableNNC Extension to dsx3FarEndCurrentTable. SEQUENCE OF NncExtE3FarEndCurrent15MinEntry .1.3.6.1.4.1.123.3.40.1.4 |
nncExtE3FarEndCurrent15MinEntryAn entry in nncExtE3FarEndCurrent15MinTable. NncExtE3FarEndCurrent15MinEntry .1.3.6.1.4.1.123.3.40.1.4.1 |
nncExtE3FarEndCurrent15MinFEBEsThe counter associated with the number of Far End Block Errors encountered by a E3 interface in the current 15 minute interval. This is the count of received FEBEs. This counter will not increment while failure defects are present. This counter is valid when an interface is configured for Direct cell mapping. When an interface is configured for PLCP cell mapping, the counter returns the last valid count when the port is in the Direct mode.ro Gauge32 .1.3.6.1.4.1.123.3.40.1.4.1.1 |
nncExtE3FarEndCurrent15MinESsThe counter associated with the number of Far End Path Errored Seconds encountered by a E3 interface in the current 15 minute interval. This counts the seconds containing one or more FEBEs. This counter is valid when an interface is configured for Direct cell mapping. When an interface is configured for PLCP cell mapping, the counter returns the last valid count when the port is in the Direct mode.ro Gauge32 .1.3.6.1.4.1.123.3.40.1.4.1.2 |
nncExtE3FarEndCurrent15MinSESsThe counter associated with the number of Far End Path Severely Errored Seconds encountered by a E3 interface in the current 15 minute interval. This counts the seconds containing 34 or more FEBEs. This counter is valid when an interface is configured for Direct cell mapping. When an interface is configured for PLCP cell mapping, the counter returns the last valid count when the port is in the Direct mode.ro Gauge32 .1.3.6.1.4.1.123.3.40.1.4.1.3 |
nncExtE3FarEndInterval15MinTableNNC Extension to dsx3FarEndIntervalTable. SEQUENCE OF NncExtE3FarEndInterval15MinEntry .1.3.6.1.4.1.123.3.40.1.5 |
nncExtE3FarEndInterval15MinEntryAn entry in nncExtE3FarEndInterval15MinTable. NncExtE3FarEndInterval15MinEntry .1.3.6.1.4.1.123.3.40.1.5.1 |
nncExtE3FarEndInterval15MinNumberA number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that all 96 intervals are valid). Integer32 .1.3.6.1.4.1.123.3.40.1.5.1.1 |
nncExtE3FarEndInterval15MinFEBEsThe counter associated with the number of Far End Block Errors encountered by a E3 interface in one of the previous 15 minute intervals. This is the count of received FEBEs. This counter will not increment while failure defects are present. This counter is valid when an interface is configured for Direct cell mapping. When an interface is configured for PLCP cell mapping, the counter returns the last valid count when the port is in the Direct mode.ro Gauge32 .1.3.6.1.4.1.123.3.40.1.5.1.2 |
nncExtE3FarEndInterval15MinESsThe counter associated with the number of Far End Path Errored Seconds encountered by a E3 interface in one of the previous 15 minute intervals. This counts the seconds containing one or more FEBEs. This counter is valid when an interface is configured for Direct cell mapping. When an interface is configured for PLCP cell mapping, the counter returns the last valid count when the port is in the Direct mode.ro Gauge32 .1.3.6.1.4.1.123.3.40.1.5.1.3 |
nncExtE3FarEndInterval15MinSESsThe counter associated with the number of Far End Path Severely Errored Seconds encountered by a E3 interface in one of the previous 15 minute intervals. This counts the seconds containing 34 or more FEBEs. This counter is valid when an interface is configured for Direct cell mapping. When an interface is configured for PLCP cell mapping, the counter returns the last valid count when the port is in the Direct mode.ro Gauge32 .1.3.6.1.4.1.123.3.40.1.5.1.4 |
nncExtE3FarEndTotal24HrTableNNC Extension to dsx3FarEndTotalTable. SEQUENCE OF NncExtE3FarEndTotal24HrEntry .1.3.6.1.4.1.123.3.40.1.6 |
nncExtE3FarEndTotal24HrEntryAn entry in nncExtE3FarEndTotal24HrTable. NncExtE3FarEndTotal24HrEntry .1.3.6.1.4.1.123.3.40.1.6.1 |
nncExtE3FarEndTotal24HrFEBEsThe counter associated with the number of Far End Block Errors encountered by a E3 interface in the previous 24 hours interval. This is the count of received FEBEs. This counter will not increment while failure defects are present. This counter is valid when an interface is configured for Direct cell mapping. When an interface is configured for PLCP cell mapping, the counter returns the last valid count when the port is in the Direct mode.ro Gauge32 .1.3.6.1.4.1.123.3.40.1.6.1.1 |
nncExtE3FarEndTotal24HrESsThe counter associated with the number of Far End Path Errored Seconds encountered by a E3 interface in the previous 24 hours interval. This counts the seconds containing one or more FEBEs. This counter is valid when an interface is configured for Direct cell mapping. When an interface is configured for PLCP cell mapping, the counter returns the last valid count when the port is in the Direct mode.ro Gauge32 .1.3.6.1.4.1.123.3.40.1.6.1.2 |
nncExtE3FarEndTotal24HrSESsThe counter associated with the number of Far End Path Severely Errored Seconds encountered by a E3 interface in the previous 24 hours interval. This counts the seconds containing 34 or more FEBEs. This counter is valid when an interface is configured for Direct cell mapping. When an interface is configured for PLCP cell mapping, the counter returns the last valid count when the port is in the Direct mode.ro Gauge32 .1.3.6.1.4.1.123.3.40.1.6.1.3 |
nncExtE3Traps OBJECT IDENTIFIER .1.3.6.1.4.1.123.3.40.2 |
nncExtE3Groups OBJECT IDENTIFIER .1.3.6.1.4.1.123.3.40.3 |
nncExtE3Current15MinGroupCollection of objects providing 15 minute current statistics for E3 interface. Unknown .1.3.6.1.4.1.123.3.40.3.1 |
nncExtE3Interval15MinGroupCollection of objects providing 15 minute interval statistics for E3 interface. Unknown .1.3.6.1.4.1.123.3.40.3.2 |
nncExtE3Total24HrGroupCollection of objects providing previous 24 hours statistics for E3 interface. Unknown .1.3.6.1.4.1.123.3.40.3.3 |
nncExtE3FarEndCurrent15MinGroupCollection of objects providing 15 minute current statistics for E3 interface. Unknown .1.3.6.1.4.1.123.3.40.3.4 |
nncExtE3FarEndInterval15MinGroupCollection of objects providing 15 minute interval statistics for E3 interface. Unknown .1.3.6.1.4.1.123.3.40.3.5 |
nncExtE3FarEndTotal24HrGroupCollection of objects providing previous 24 hours statistics for E3 interface. Unknown .1.3.6.1.4.1.123.3.40.3.6 |
nncExtE3Compliances OBJECT IDENTIFIER .1.3.6.1.4.1.123.3.40.4 |
nncExtE3ComplianceThe compliance statement for Newbridge E3 interfaces. Unknown .1.3.6.1.4.1.123.3.40.4.1 |