NNCCEFILLLEVELSTATISTICS-MIB
The NNCCEFILLLEVELSTATISTICS-MIB monitors AAL1 (ATM Adaptation Layer 1) buffer fill levels and associated traffic statistics on Cisco IOS devices to detect congestion or underflow conditions in constant bit-rate ATM circuits. This module provides critical counter metrics for diagnosing cell loss and synchronization issues within legacy ATM networks.
Imported Objects
Objects
10 total| Object Name |
|---|
nncCEFillLevelStatisticsThis module contains definitions for monitoring aal1 fill level statistics. MODULE-IDENTITY .1.3.6.1.4.1.123.3.47 |
nncCEFillLevelStatisticsObjects OBJECT IDENTIFIER .1.3.6.1.4.1.123.3.47.1 |
nncCEFillLevelStatisticsTableThe nncCEFillLevelStatisticsTable contains objects for monitoring the maximum and minimum fill levels reached by the playout buffer SEQUENCE OF NncCEFillLevelStatisticsEntry .1.3.6.1.4.1.123.3.47.1.1 |
nncCEFillLevelStatisticsEntryAn entry in the nncCEFillLevelStatisticsTable. NncCEFillLevelStatisticsEntry .1.3.6.1.4.1.123.3.47.1.1.1 |
nncCEMinFillLevelThis value represents the minimum fill level reached by the playout buffer measured in micro seconds.ro INTEGER .1.3.6.1.4.1.123.3.47.1.1.1.1 |
nncCEMaxFillLevelThis value represents the maximum fill level reached by the playout buffer measured in micro seconds.ro INTEGER .1.3.6.1.4.1.123.3.47.1.1.1.2 |
nncCEFillLevelStatisticsGroups OBJECT IDENTIFIER .1.3.6.1.4.1.123.3.47.2 |
nncCERawFillLevelStatisticsGroupsCollection of objects providing raw fill stats. Unknown .1.3.6.1.4.1.123.3.47.2.1 |
nncCEFillLevelStatisticsCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.123.3.47.3 |
nncCEFillLevelStatisticsComplianceThe compliance statement for Newbridge SNMP. Unknown .1.3.6.1.4.1.123.3.47.3.1 |
More MIBs from Newbridge
Browse all NewbridgeMIBs →The NNCEXTCALLROUTINGSTATS-MIB monitors performance and fault metrics for ATM PNNI and static routing on Nortel (now Avaya) NNCE (Network Node Control Element) hardware, specifically tracking call setup success rates, crankback events, DTL generation, and bandwidth allocation failures across non-border and border nodes. It provides granular, interval-based counters for routing table descriptors to distinguish between originating, transiting, and terminating call states, enabling the detection of routing loops, CAC failures, and re-routing efficiency within the PNNI domain.
The NNCFRINTSTATISTICS-MIB module enables performance monitoring of Frame Relay stream traffic on Cisco devices by exposing interface-level counters for data transmission, reception, and error statistics. This MIB facilitates the tracking of Frame Relay-specific metrics such as CIR, FECN, BECN, and discard counts to assess link health and throughput efficiency.
SNMP MIB module
SNMP MIB module
The NNCEXTSVCSIGSTATS-MIB module provides performance monitoring counters for Asynchronous Transfer Mode (ATM) Switched Virtual Circuit (SVC) signaling functions, specifically tracking the establishment, maintenance, and teardown of signaling sessions within Cisco's Network Control and Management Environment (NCME). It enables administrators to quantify signaling traffic volume, error rates, and session state transitions to diagnose connectivity issues and validate SVC provisioning on ATM-based network infrastructure.
The NNC-ATM-STATISTICS-MIB enables performance monitoring of Asynchronous Transfer Mode (ATM) Virtual Path Links (VPL), Virtual Channel Links (VCL), and Virtual Path Aggregations (VPA) by tracking cell counts, OAM cell statistics, and error metrics across 15-minute and 1-hour historical intervals. This module facilitates granular traffic analysis and fault detection on ATM hardware by providing current and interval-based counters for valid, admitted, and idle cells aligned to wall-clock time boundaries.