NNCAAL5-MIB
The NNCAAL5-MIB module enables monitoring and configuration of Asynchronous Transfer Mode (ATM) Adaptation Layer 5 (AAL5) parameters, including traffic counters and error statistics, on Newbridge Networks ATM interface cards.
Imported Objects
Objects
16 total| Object Name |
|---|
nncAAL5This module contains definitions for monitoring and
configuring AAL5 information on Newbridge ATM cards. MODULE-IDENTITY .1.3.6.1.4.1.123.3.71 |
nncAAL5Objects OBJECT IDENTIFIER .1.3.6.1.4.1.123.3.71.1 |
nncAAL5Configuration OBJECT IDENTIFIER .1.3.6.1.4.1.123.3.71.1.1 |
nncAAL5Statistics OBJECT IDENTIFIER .1.3.6.1.4.1.123.3.71.1.2 |
nncAAL5StatisticsTableThe nncAAL5StatisticsTable contains AAL5 Statistics on a per
connection basis. SEQUENCE OF NncAAL5StatisticsEntry .1.3.6.1.4.1.123.3.71.1.2.1 |
nncAAL5StatisticsEntryAn entry in the nncAAL5StatisticsTable. NncAAL5StatisticsEntry .1.3.6.1.4.1.123.3.71.1.2.1.1 |
nncAAL5RxPDUsThis count gives the number of AAL5 PDUs received.ro Counter32 .1.3.6.1.4.1.123.3.71.1.2.1.1.1 |
nncAAL5TxPDUsThis count gives the number of AAL5 PDUs transmitted.ro Counter32 .1.3.6.1.4.1.123.3.71.1.2.1.1.2 |
nncAAL5Crc32PDUErrorsThis count gives the number of AAL5 CRC-32 errors in the cell
payload.ro Counter32 .1.3.6.1.4.1.123.3.71.1.2.1.1.3 |
nncAAL5InvalidFormatPDUThis count gives the number of all AAL5 invalid format PDU errors.ro Counter32 .1.3.6.1.4.1.123.3.71.1.2.1.1.4 |
nncAAL5OversizedSDUThis count gives the number of reassembled SDUs which were larger
than the allowed size for the application.ro Counter32 .1.3.6.1.4.1.123.3.71.1.2.1.1.5 |
nncAAL5InvalidFieldsThis count gives the sum of three simple counts: Invalid Format PDU,
Oversized SDU, and Length Violation.ro Counter32 .1.3.6.1.4.1.123.3.71.1.2.1.1.6 |
nncAAL5ReassemblyTimerExpirationsThis count gives the number of reassembly timer expirations.ro Counter32 .1.3.6.1.4.1.123.3.71.1.2.1.1.7 |
nncAAL5Traps OBJECT IDENTIFIER .1.3.6.1.4.1.123.3.71.2 |
nncAAL5Groups OBJECT IDENTIFIER .1.3.6.1.4.1.123.3.71.3 |
nncAAL5Compliances OBJECT IDENTIFIER .1.3.6.1.4.1.123.3.71.4 |
More MIBs from Newbridge
Browse all NewbridgeMIBs →The NNCEXTCALLROUTINGSTATS-MIB monitors performance and fault metrics for ATM PNNI and static routing on Nortel (now Avaya) NNCE (Network Node Control Element) hardware, specifically tracking call setup success rates, crankback events, DTL generation, and bandwidth allocation failures across non-border and border nodes. It provides granular, interval-based counters for routing table descriptors to distinguish between originating, transiting, and terminating call states, enabling the detection of routing loops, CAC failures, and re-routing efficiency within the PNNI domain.
The NNCFRINTSTATISTICS-MIB module enables performance monitoring of Frame Relay stream traffic on Cisco devices by exposing interface-level counters for data transmission, reception, and error statistics. This MIB facilitates the tracking of Frame Relay-specific metrics such as CIR, FECN, BECN, and discard counts to assess link health and throughput efficiency.
SNMP MIB module
SNMP MIB module
The NNCEXTSVCSIGSTATS-MIB module provides performance monitoring counters for Asynchronous Transfer Mode (ATM) Switched Virtual Circuit (SVC) signaling functions, specifically tracking the establishment, maintenance, and teardown of signaling sessions within Cisco's Network Control and Management Environment (NCME). It enables administrators to quantify signaling traffic volume, error rates, and session state transitions to diagnose connectivity issues and validate SVC provisioning on ATM-based network infrastructure.
The NNC-ATM-STATISTICS-MIB enables performance monitoring of Asynchronous Transfer Mode (ATM) Virtual Path Links (VPL), Virtual Channel Links (VCL), and Virtual Path Aggregations (VPA) by tracking cell counts, OAM cell statistics, and error metrics across 15-minute and 1-hour historical intervals. This module facilitates granular traffic analysis and fault detection on ATM hardware by providing current and interval-based counters for valid, admitted, and idle cells aligned to wall-clock time boundaries.