NNC-EXT-PM-STATISTICS-MIB
AI MIB Summary
The NNC-EXT-PM-STATISTICS-MIB module enables SNMP-based monitoring of OAM Performance Monitoring statistics on Newbridge (Nortel) ATM/VPL/VCL interfaces, specifically tracking Cell Loss Ratio and error demarcation values (M errored, M lost, M misinserted). It provides access to historical performance data via 15-minute and 24-hour interval tables to assess link quality and detect degradation in accordance with GR-1248-CORE standards.
This module contains the definitions for statistics collected for OAM Performance Monitoring. The definition and requirement for these statistics are found in GR-1248-CORE. In addition, Cell Loss Ratio has been added as part of the Newbridge extension.
This MIB module contains the following tables: OAM PM 15 Minute Current Table OAM PM 15 Minute Interval Table OAM PM 24 Hour Current Table OAM PM 24 Hour Interval Table
These tables are heavily influenced by the definition of VPL/VCL described in rfc1695. The number of intervals supported is dependent upon resource availibility on any given product, but should nominally be 32 for 15 Minute intervals and 2 for 24 Hour intervals. To avoid building in massive amounts of storage, some products may adopt a bulk collection scheme.
Intervals:
Statistics on the performance of VPL/VCLs are collected over a historical stratum of up to a maximum of M intervals. The value of M is a function of a product's storage capability. For example, on the 36170 product, M = 32 for 15 Minute interval.
The 15 Minute intervals are aligned to the quarter of one hour of a wall clock. The current interval spans back to the last 15 minute tick on the wall clock. Continuing along the timeline from that point is the most recently completed interval and has an index of 1. The previous interval has an index of 2 and so on. Note that the oldest interval may be incomplete since the statistic collection may have been enabled offset to the quarter or one hour tick.
t 0 -1i -2i -3i ===========|===========|===========|===========|=========== current N = 1 N = 2 N = 3 N = 4 ... N = M interval
Performance Monitoring Demarcation Values: As defined in GR-1248-CORE, three demarcation values are defined to evaluate the condition of a PM cell block. These are M errored, M lost and M misinserted. These values are configurable on a system-wide basis. Where applicable, the definition of a statistics object in this module will refer to one or more of these values.
Main OID:
nncExtPmStatistics.1.3.6.1.4.1.123.3.65
85
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
85 total| Object Name |
|---|
nncExtPmStatisticsThis module contains the definitions for statistics collected for
OAM Performance Monitoring. The definition and requirement for
these statistics are found in GR-1248-CORE. In addition, Cell
Loss Ratio has been added as part of the Newbridge extension.
This MIB module contains the following tables:
OAM PM 15 Minute Current Table
OAM PM 15 Minute Interval Table
OAM PM 24 Hour Current Table
OAM PM 24 Hour Interval Table
These tables are heavily influenced by the definition of VPL/VCL
described in rfc1695. The number of intervals supported is dependent upon
resource availibility on any given product, but should nominally be 32
for 15 Minute intervals and 2 for 24 Hour intervals. To avoid building
in massive amounts of storage, some products may adopt a bulk
collection scheme.
Intervals:
Statistics on the performance of VPL/VCLs are collected over a
historical stratum of up to a maximum of M intervals. The value of M
is a function of a product's storage capability. For example, on the
36170 product, M = 32 for 15 Minute interval.
The 15 Minute intervals are aligned to the quarter of one hour of a
wall clock. The current interval spans back to the last 15 minute
tick on the wall clock. Continuing along the timeline from that point
is the most recently completed interval and has an index of 1. The
previous interval has an index of 2 and so on. Note that the oldest
interval may be incomplete since the statistic collection may have
been enabled offset to the quarter or one hour tick.
t
0 -1i -2i -3i
===========|===========|===========|===========|===========
current N = 1 N = 2 N = 3 N = 4 ... N = M
interval
Performance Monitoring Demarcation Values:
As defined in GR-1248-CORE, three demarcation values are defined to
evaluate the condition of a PM cell block. These are M errored, M lost
and M misinserted. These values are configurable on a system-wide basis.
Where applicable, the definition of a statistics object in this module
will refer to one or more of these values. MODULE-IDENTITY .1.3.6.1.4.1.123.3.65 |
nncExtPmStatisticsObjects OBJECT IDENTIFIER .1.3.6.1.4.1.123.3.65.1 |
nncExtPm15MinCurrentTableThis table contains objects for OAM Performance
Monitoring of an endpoint (VP or VC) during the
current 15 minute interval. SEQUENCE OF NncExtPm15MinCurrentEntry .1.3.6.1.4.1.123.3.65.1.1 |
nncExtPm15MinCurrentEntryAn entry in the 15 minute current statistics
table. Each row contains current statistics for
an endpoint collecting PM statistics. Note that
for a VP endpoint, the VCI value is 0. NncExtPm15MinCurrentEntry .1.3.6.1.4.1.123.3.65.1.1.1 |
nncExtPm15MinCurrentCellFlowLink or matrix cell flow NncExtPmCellFlowDirType .1.3.6.1.4.1.123.3.65.1.1.1.1 |
nncExtPm15MinCurrentTestSegment or end-to-end test NncExtPmTestType .1.3.6.1.4.1.123.3.65.1.1.1.2 |
nncExtPm15MinCurrentStateThe state of the current interval. The object
provides a status for those entries which have
been reset by the user, or have been subject
to a wall clock time change.ro NncExtIntvlStateType (NNC-INTERVAL-STATISTICS-TC-MIB) .1.3.6.1.4.1.123.3.65.1.1.1.3 |
nncExtPm15MinCurrentAbsoluteIntervalNumberThe absolute interval number of this interval.ro NncExtAbsIntvlNumberType (NNC-INTERVAL-STATISTICS-TC-MIB) .1.3.6.1.4.1.123.3.65.1.1.1.4 |
nncExtPm15MinCurrentSECBsSeverely Errored Cell Blocks. This counter is
incremented by one for each PM cell block when
M errored, M lost or M misinserted is exceeded.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.65.1.1.1.5 |
nncExtPm15MinCurrentLostCellsClp0And1Lost 0+1 User Information Cells. For each PM
cell block, if the number of Lost 0+1 User
Information Cells does not exceed M lost,
then this number is added to this counter.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.65.1.1.1.6 |
nncExtPm15MinCurrentLostCellsClp0Lost 0 User Information Cells. For each PM
cell block, if the inferred number of Lost 0
User Information Cells (the smaller value of
Lost 0 or 0+1 cells) does not exceed M lost,
then this number is added to this counter.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.65.1.1.1.7 |
nncExtPm15MinCurrentMisinsertedCellsMisinserted User Information Cells. For each
PM cell block, if the number of excess User
Information Cells does not exceed M misinserted,
then this number is added to this counter.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.65.1.1.1.8 |
nncExtPm15MinCurrentCellsClp0And1Number of Transmitted 0+1 User Information
Cells. For each PM cell block, the number of
0+1 User Information Cells is added to this
counter.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.65.1.1.1.9 |
nncExtPm15MinCurrentCellsClp0Number of Transmitted 0 User Information
Cells. For each PM cell block, the number of
0 User Information Cells is added to this
counter.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.65.1.1.1.10 |
nncExtPm15MinCurrentImpairedBlocksImpaired Blocks. This counter is incremented
by one when a PM cell block has at least one
impairment of any type.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.65.1.1.1.11 |
nncExtPm15MinCurrentTotalLostCellsClp0And1Total Lost 0+1 User Information Cells. For
each PM cell block, the number of Lost 0+1 User
Information Cells is added to this counter.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.65.1.1.1.12 |
nncExtPm15MinCurrentTotalLostCellsClp0Total Lost 0 User Information Cells. For
each PM cell block, the inferred number of Lost
0 User Information Cells (the smaller value of
Lost 0 or 0+1 cells) is added to this counter.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.65.1.1.1.13 |
nncExtPm15MinCurrentIBWithCellLossMisinsertNumber of Impaired Blocks with Cell Loss/
Misinsertion. For each PM cell block, the
number of lost or misinserted cells is added
to this counter.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.65.1.1.1.14 |
nncExtPm15MinCurrentCellLossRatioClp0And1Cell Loss Ratio 0+1. Ratio of cell loss
calculated by ((Total Lost 0+1 User Information
Cells) / (Number of Transmitted 0+1 User
Information Cells)) * 1000000000. No
consideration is made for cells discarded or
tagged by UPC.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.65.1.1.1.15 |
nncExtPm15MinCurrentCellLossRatioClp0Cell Loss Ratio 0. Ratio of cell loss
calculated by ((Total Lost 0 User Information
Cells) / (Number of Transmitted 0 User
Information Cells)) * 1000000000. No
consideration is made for cells discarded or
tagged by UPC.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.65.1.1.1.16 |
nncExtPm15MinIntervalTableThis table contains objects for OAM Performance
Monitoring of an endpoint (VP or VC) over a
historical stratum of M 15 minute intervals. SEQUENCE OF NncExtPm15MinIntervalEntry .1.3.6.1.4.1.123.3.65.1.2 |
nncExtPm15MinIntervalEntryAn entry in the 15 minute interval statistics
table. Each row contains interval statistics for
an endpoint collecting PM statistics. Note that
for a VP endpoint, the VCI value is 0. NncExtPm15MinIntervalEntry .1.3.6.1.4.1.123.3.65.1.2.1 |
nncExtPm15MinIntervalCellFlowLink or matrix cell flow NncExtPmCellFlowDirType .1.3.6.1.4.1.123.3.65.1.2.1.1 |
nncExtPm15MinIntervalTestSegment or end-to-end test NncExtPmTestType .1.3.6.1.4.1.123.3.65.1.2.1.2 |
nncExtPm15MinIntervalNumberThe interval number (N) of the statistics in
this row. NncExtRelIntvlNumberType (NNC-INTERVAL-STATISTICS-TC-MIB) .1.3.6.1.4.1.123.3.65.1.2.1.3 |
nncExtPm15MinIntervalStateThe state of the interval represented by this
row. The object provides a status for those
entries which have been reset by the user, or
have been subject to a wall clock time change.ro NncExtIntvlStateType (NNC-INTERVAL-STATISTICS-TC-MIB) .1.3.6.1.4.1.123.3.65.1.2.1.4 |
nncExtPm15MinIntervalAbsoluteIntervalNumberThe absolute interval number of this interval.ro NncExtAbsIntvlNumberType (NNC-INTERVAL-STATISTICS-TC-MIB) .1.3.6.1.4.1.123.3.65.1.2.1.5 |
nncExtPm15MinIntervalSECBsSeverely Errored Cell Blocks. This counter is
incremented by one for each PM cell block when
M errored, M lost or M misinserted is exceeded.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.65.1.2.1.6 |
nncExtPm15MinIntervalLostCellsClp0And1Lost 0+1 User Information Cells. For each PM
cell block, if the number of Lost 0+1 User
Information Cells does not exceed M lost,
then this number is added to this counter.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.65.1.2.1.7 |
nncExtPm15MinIntervalLostCellsClp0Lost 0 User Information Cells. For each PM
cell block, if the inferred number of Lost 0
User Information Cells (the smaller value of
Lost 0 or 0+1 cells) does not exceed M lost,
then this number is added to this counter.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.65.1.2.1.8 |
nncExtPm15MinIntervalMisinsertedCellsMisinserted User Information Cells. For each
PM cell block, if the number of excess User
Information Cells does not exceed M misinserted,
then this number is added to this counter.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.65.1.2.1.9 |
nncExtPm15MinIntervalCellsClp0And1Number of Transmitted 0+1 User Information
Cells. For each PM cell block, the number of
0+1 User Information Cells is added to this
counter.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.65.1.2.1.10 |
nncExtPm15MinIntervalCellsClp0Number of Transmitted 0 User Information
Cells. For each PM cell block, the number of
0 User Information Cells is added to this
counter.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.65.1.2.1.11 |
nncExtPm15MinIntervalImpairedBlocksImpaired Blocks. This counter is incremented
by one when a PM cell block has at least one
impairment of any type.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.65.1.2.1.12 |
nncExtPm15MinIntervalTotalLostCellsClp0And1Total Lost 0+1 User Information Cells. For
each PM cell block, the number of Lost 0+1 User
Information Cells is added to this counter.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.65.1.2.1.13 |
nncExtPm15MinIntervalTotalLostCellsClp0Total Lost 0 User Information Cells. For
each PM cell block, the inferred number of Lost
0 User Information Cells (the smaller value of
Lost 0 or 0+1 cells) is added to this counter.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.65.1.2.1.14 |
nncExtPm15MinIntervalIBWithCellLossMisinsertNumber of Impaired Blocks with Cell Loss/
Misinsertion. For each PM cell block, the
number of lost or misinserted cells is added
to this counter.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.65.1.2.1.15 |
nncExtPm15MinIntervalCellLossRatioClp0And1Cell Loss Ratio 0+1. Ratio of cell loss
calculated by ((Total Lost 0+1 User Information
Cells) / (Number of Transmitted 0+1 User
Information Cells)) * 1000000000. No
consideration is made for cells discarded or
tagged by UPC.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.65.1.2.1.16 |
nncExtPm15MinIntervalCellLossRatioClp0Cell Loss Ratio 0. Ratio of cell loss
calculated by ((Total Lost 0 User Information
Cells) / (Number of Transmitted 0 User
Information Cells)) * 1000000000. No
consideration is made for cells discarded or
tagged by UPC.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.65.1.2.1.17 |
nncExtPm24HrCurrentTableThis table contains objects for OAM Performance
Monitoring of an endpoint (VP or VC) during the
current 24 hour interval. SEQUENCE OF NncExtPm24HrCurrentEntry .1.3.6.1.4.1.123.3.65.1.3 |
nncExtPm24HrCurrentEntryAn entry in the 24 hour current statistics
table. Each row contains current statistics for
an endpoint collecting PM statistics. Note that
for a VP endpoint, the VCI value is 0. NncExtPm24HrCurrentEntry .1.3.6.1.4.1.123.3.65.1.3.1 |
nncExtPm24HrCurrentCellFlowLink or matrix cell flow NncExtPmCellFlowDirType .1.3.6.1.4.1.123.3.65.1.3.1.1 |
nncExtPm24HrCurrentTestSegment or end-to-end test NncExtPmTestType .1.3.6.1.4.1.123.3.65.1.3.1.2 |
nncExtPm24HrCurrentStateThe state of the current interval. The object
provides a status for those entries which have
been reset by the user, or have been subject
to a wall clock time change.ro NncExtIntvlStateType (NNC-INTERVAL-STATISTICS-TC-MIB) .1.3.6.1.4.1.123.3.65.1.3.1.3 |
nncExtPm24HrCurrentAbsoluteIntervalNumberThe absolute interval number of this interval.ro NncExtAbsIntvlNumberType (NNC-INTERVAL-STATISTICS-TC-MIB) .1.3.6.1.4.1.123.3.65.1.3.1.4 |
nncExtPm24HrCurrentSECBsSeverely Errored Cell Blocks. This counter is
incremented by one for each PM cell block when
M errored, M lost or M misinserted is exceeded.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.65.1.3.1.5 |
nncExtPm24HrCurrentErroredCellsErrored Cells. For each PM cell block, if the
number of errored cells does not exceed M
errored, then this number is added to this
counter.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.65.1.3.1.6 |
nncExtPm24HrCurrentLostCellsClp0And1Lost 0+1 User Information Cells. For each PM
cell block, if the number of Lost 0+1 User
Information Cells does not exceed M lost,
then this number is added to this counter.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.65.1.3.1.7 |
nncExtPm24HrCurrentLostCellsClp0Lost 0 User Information Cells. For each PM
cell block, if the inferred number of Lost 0
User Information Cells (the smaller value of
Lost 0 or 0+1 cells) does not exceed M lost,
then this number is added to this counter.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.65.1.3.1.8 |
nncExtPm24HrCurrentMisinsertedCellsMisinserted User Information Cells. For each
PM cell block, if the number of excess User
Information Cells does not exceed M misinserted,
then this number is added to this counter.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.65.1.3.1.9 |
nncExtPm24HrCurrentCellsClp0And1Number of Transmitted 0+1 User Information
Cells. For each PM cell block, the number of
0+1 User Information Cells is added to this
counter.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.65.1.3.1.10 |
nncExtPm24HrCurrentCellsClp0Number of Transmitted 0 User Information
Cells. For each PM cell block, the number of
0 User Information Cells is added to this
counter.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.65.1.3.1.11 |
nncExtPm24HrCurrentImpairedBlocksImpaired Blocks. This counter is incremented
by one when a PM cell block has at least one
impairment of any type.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.65.1.3.1.12 |
nncExtPm24HrCurrentTotalLostCellsClp0And1Total Lost 0+1 User Information Cells. For
each PM cell block, the number of Lost 0+1 User
Information Cells is added to this counter.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.65.1.3.1.13 |
nncExtPm24HrCurrentTotalLostCellsClp0Total Lost 0 User Information Cells. For
each PM cell block, the inferred number of Lost
0 User Information Cells (the smaller value of
Lost 0 or 0+1 cells) is added to this counter.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.65.1.3.1.14 |
nncExtPm24HrCurrentSECBErroredSECB Errored (i.e. SECB due to bit errors).
This counter is incremented by one for each
PM cell block when M errored is exceeded.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.65.1.3.1.15 |
nncExtPm24HrCurrentSECBMisinsertedSECB Misinserted (i.e. SECB due to misinserted
cells). This counter is incremented by one for
each PM cell block when M misinserted is
exceeded.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.65.1.3.1.16 |
nncExtPm24HrCurrentIBWithCellLossMisinsertNumber of Impaired Blocks with Cell Loss/
Misinsertion. For each PM cell block, the
number of lost or misinserted cells is added
to this counter.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.65.1.3.1.17 |
nncExtPm24HrCurrentCellLossRatioClp0And1Cell Loss Ratio 0+1. Ratio of cell loss
calculated by ((Total Lost 0+1 User Information
Cells) / (Number of Transmitted 0+1 User
Information Cells)) * 1000000000. No
consideration is made for cells discarded or
tagged by UPC.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.65.1.3.1.18 |
nncExtPm24HrCurrentCellLossRatioClp0Cell Loss Ratio 0. Ratio of cell loss
calculated by ((Total Lost 0 User Information
Cells) / (Number of Transmitted 0 User
Information Cells)) * 1000000000. No
consideration is made for cells discarded or
tagged by UPC.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.65.1.3.1.19 |
nncExtPm24HrIntervalTableThis table contains objects for OAM Performance
Monitoring of an endpoint (VP or VC) over a
historical stratum of N 24 hour intervals. SEQUENCE OF NncExtPm24HrIntervalEntry .1.3.6.1.4.1.123.3.65.1.4 |
nncExtPm24HrIntervalEntryAn entry in the 24 hour interval statistics
table. Each row contains interval statistics for
an endpoint collecting PM statistics. Note that
for a VP endpoint, the VCI value is 0. NncExtPm24HrIntervalEntry .1.3.6.1.4.1.123.3.65.1.4.1 |
nncExtPm24HrIntervalCellFlowLink or matrix cell flow NncExtPmCellFlowDirType .1.3.6.1.4.1.123.3.65.1.4.1.1 |
nncExtPm24HrIntervalTestSegment or end-to-end test NncExtPmTestType .1.3.6.1.4.1.123.3.65.1.4.1.2 |
nncExtPm24HrIntervalNumberThe interval number (N) of the statistics in
this row. NncExtRelIntvlNumberType (NNC-INTERVAL-STATISTICS-TC-MIB) .1.3.6.1.4.1.123.3.65.1.4.1.3 |
nncExtPm24HrIntervalStateThe state of the interval represented by this
row. The object provides a status for those
entries which have been reset by the user, or
have been subject to a wall clock time change.ro NncExtIntvlStateType (NNC-INTERVAL-STATISTICS-TC-MIB) .1.3.6.1.4.1.123.3.65.1.4.1.4 |
nncExtPm24HrIntervalAbsoluteIntervalNumberThe absolute interval number of this interval.ro NncExtAbsIntvlNumberType (NNC-INTERVAL-STATISTICS-TC-MIB) .1.3.6.1.4.1.123.3.65.1.4.1.5 |
nncExtPm24HrIntervalSECBsSeverely Errored Cell Blocks. This counter is
incremented by one for each PM cell block when
M errored, M lost or M misinserted is exceeded.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.65.1.4.1.6 |
nncExtPm24HrIntervalErroredCellsErrored Cells. For each PM cell block, if the
number of errored cells does not exceed M
errored, then this number is added to this
counter.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.65.1.4.1.7 |
nncExtPm24HrIntervalLostCellsClp0And1Lost 0+1 User Information Cells. For each PM
cell block, if the number of Lost 0+1 User
Information Cells does not exceed M lost,
then this number is added to this counter.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.65.1.4.1.8 |
nncExtPm24HrIntervalLostCellsClp0Lost 0 User Information Cells. For each PM
cell block, if the inferred number of Lost 0
User Information Cells (the smaller value of
Lost 0 or 0+1 cells) does not exceed M lost,
then this number is added to this counter.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.65.1.4.1.9 |
nncExtPm24HrIntervalMisinsertedCellsMisinserted User Information Cells. For each
PM cell block, if the number of excess User
Information Cells does not exceed M misinserted,
then this number is added to this counter.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.65.1.4.1.10 |
nncExtPm24HrIntervalCellsClp0And1Number of Transmitted 0+1 User Information
Cells. For each PM cell block, the number of
0+1 User Information Cells is added to this
counter.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.65.1.4.1.11 |
nncExtPm24HrIntervalCellsClp0Number of Transmitted 0 User Information
Cells. For each PM cell block, the number of
0 User Information Cells is added to this
counter.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.65.1.4.1.12 |
nncExtPm24HrIntervalImpairedBlocksImpaired Blocks. This counter is incremented
by one when a PM cell block has at least one
impairment of any type.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.65.1.4.1.13 |
nncExtPm24HrIntervalTotalLostCellsClp0And1Total Lost 0+1 User Information Cells. For
each PM cell block, the number of Lost 0+1 User
Information Cells is added to this counter.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.65.1.4.1.14 |
nncExtPm24HrIntervalTotalLostCellsClp0Total Lost 0 User Information Cells. For
each PM cell block, the inferred number of Lost
0 User Information Cells (the smaller value of
Lost 0 or 0+1 cells) is added to this counter.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.65.1.4.1.15 |
nncExtPm24HrIntervalSECBErroredSECB Errored (i.e. SECB due to bit errors).
This counter is incremented by one for each
PM cell block when M errored is exceeded.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.65.1.4.1.16 |
nncExtPm24HrIntervalSECBMisinsertedSECB Misinserted (i.e. SECB due to misinserted
cells). This counter is incremented by one for
each PM cell block when M misinserted is
exceeded.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.65.1.4.1.17 |
nncExtPm24HrIntervalIBWithCellLossMisinsertNumber of Impaired Blocks with Cell Loss/
Misinsertion. For each PM cell block, the
number of lost or misinserted cells is added
to this counter.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.65.1.4.1.18 |
nncExtPm24HrIntervalCellLossRatioClp0And1Cell Loss Ratio 0+1. Ratio of cell loss
calculated by ((Total Lost 0+1 User Information
Cells) / (Number of Transmitted 0+1 User
Information Cells)) * 1000000000. No
consideration is made for cells discarded or
tagged by UPC.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.65.1.4.1.19 |
nncExtPm24HrIntervalCellLossRatioClp0Cell Loss Ratio 0. Ratio of cell loss
calculated by ((Total Lost 0 User Information
Cells) / (Number of Transmitted 0 User
Information Cells)) * 1000000000. No
consideration is made for cells discarded or
tagged by UPC.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.65.1.4.1.20 |
nncExtPmStatisticsTraps OBJECT IDENTIFIER .1.3.6.1.4.1.123.3.65.2 |
nncExtPmStatisticsGroups OBJECT IDENTIFIER .1.3.6.1.4.1.123.3.65.3 |
nncExtPmStatisticsCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.123.3.65.4 |