NMS-IEEE8023-LAG-MIB
AI MIB Summary
The NMS-IEEE8023-LAG-MIB enables monitoring and configuration of IEEE 802.3ad Link Aggregation Control Protocol (LACP) parameters, including aggregate interface status, member port states, and traffic distribution counters on network switches and routers.
The Link Aggregation module for managing IEEE Std
802.3ad.
Main OID:
lagMIB.1.3.6.1.4.1.3320.2.232
82
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
82 total| Object Name |
|---|
lagMIBThe Link Aggregation module for managing IEEE Std
802.3ad. MODULE-IDENTITY .1.3.6.1.4.1.3320.2.232 |
lagMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.3320.2.232.1 |
dot3adAgg OBJECT IDENTIFIER .1.3.6.1.4.1.3320.2.232.1.1 |
dot3adAggTableA table that contains information about every
Aggregator that is associated with this System. SEQUENCE OF Dot3adAggEntry .1.3.6.1.4.1.3320.2.232.1.1.1 |
dot3adAggEntryA list of the Aggregator parameters. This is indexed
by the ifIndex of the Aggregator. Dot3adAggEntry .1.3.6.1.4.1.3320.2.232.1.1.1.1 |
dot3adAggIndexThe unique identifier allocated to this Aggregator by
the local System. This attribute identifies an
Aggregator instance among the subordinate managed
objects of the containing object.
This value is read-only. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.3320.2.232.1.1.1.1.1 |
dot3adAggMACAddressA 6-octet read-only value carrying the individual
MAC address assigned to the Aggregator.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.3320.2.232.1.1.1.1.2 |
dot3adAggActorSystemPriorityA 2-octet read-write value indicating the priority
value associated with the Actor's System ID.rw INTEGER .1.3.6.1.4.1.3320.2.232.1.1.1.1.3 |
dot3adAggActorSystemIDA 6-octet read-write MAC address value used as a unique
identifier for the System that contains this Aggregator.
NOTE-From the perspective of the Link Aggregation
mechanisms described in Clause 43, only a single
combination of Actor's System ID and System Priority are
considered, and no distinction is made between the
values of these parameters for an Aggregator and the
port(s) that are associated with it; i.e., the protocol
is described in terms of the operation of aggregation
within a single System. However, the managed objects
provided for the Aggregator and the port both allow
management of these parameters. The result of this is to
permit a single piece of equipment to be configured by
management to contain more than one System from the
point of view of the operation of Link Aggregation. This
may be of particular use in the configuration of
equipment that has limited aggregation capability (see
43.6).ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.3320.2.232.1.1.1.1.4 |
dot3adAggAggregateOrIndividualA read-only Boolean value indicating whether the
Aggregator represents an Aggregate (`TRUE') or
an Individual link (`FALSE').ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3320.2.232.1.1.1.1.5 |
dot3adAggActorAdminKeyThe current administrative value of the Key for the
Aggregator. The administrative Key value may differ from
the operational Key value for the reasons discussed in
43.6.2. This is a 16-bit, read-only value. The meaning
of particular Key values is of local significance.ro LacpKey .1.3.6.1.4.1.3320.2.232.1.1.1.1.6 |
dot3adAggActorOperKeyThe current operational value of the Key for the
Aggregator. The administrative Key value may differ from
the operational Key value for the reasons discussed in
43.6.2. This is a 16-bit read-only value. The meaning
of particular Key values is of local significance.ro LacpKey .1.3.6.1.4.1.3320.2.232.1.1.1.1.7 |
dot3adAggPartnerSystemIDA 6-octet read-only MAC address value consisting of the
unique identifier for the current protocol Partner of
this Aggregator. A value of zero indicates that there is
no known Partner. If the aggregation is manually
configured, this System ID value will be a value
assigned by the local System.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.3320.2.232.1.1.1.1.8 |
dot3adAggPartnerSystemPriorityA 2-octet read-only value that indicates the priority
value associated with the Partner's System ID. If the
aggregation is manually configured, this System Priority
value will be a value assigned by the local System.ro INTEGER .1.3.6.1.4.1.3320.2.232.1.1.1.1.9 |
dot3adAggPartnerOperKeyThe current operational value of the Key for the
Aggregator's current protocol Partner. This is a 16-bit
read-only value. If the aggregation is manually
configured, this Key value will be a value assigned by
the local System.ro LacpKey .1.3.6.1.4.1.3320.2.232.1.1.1.1.10 |
dot3adAggCollectorMaxDelayThe value of this 16-bit read-write attribute defines
the maximum delay, in tens of microseconds, that may be
imposed by the Frame Collector between receiving a frame
from an Aggregator Parser, and either delivering the
frame to its MAC Client or discarding the frame (see
43.2.3.1.1).rw INTEGER .1.3.6.1.4.1.3320.2.232.1.1.1.1.11 |
dot3adAggIfIndexThe interface index of this Aggregator.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.3320.2.232.1.1.1.1.12 |
dot3adAggAdminModeThe default aggregation control mode of this Aggregator.rw LagMode .1.3.6.1.4.1.3320.2.232.1.1.1.1.13 |
dot3adAggOperModeThe running aggregation control mode of this Aggregator.ro LagMode .1.3.6.1.4.1.3320.2.232.1.1.1.1.14 |
dot3adAggRowStatusThis object indicates the status of this entry.
Set this value to 'createAndGo' to create a new aggregator.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3320.2.232.1.1.1.1.15 |
dot3adAggPortListTableA table that contains a list of all the ports
associated with each Aggregator. SEQUENCE OF Dot3adAggPortListEntry .1.3.6.1.4.1.3320.2.232.1.1.2 |
dot3adAggPortListEntryA list of the ports associated with a given Aggregator.
This is indexed by the ifIndex of the Aggregator. Dot3adAggPortListEntry .1.3.6.1.4.1.3320.2.232.1.1.2.1 |
dot3adAggPortListPortsThe complete set of ports currently associated with
this Aggregator. Each bit set in this list represents
an Actor Port member of this Link Aggregation.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.3320.2.232.1.1.2.1.1 |
dot3adAggPortListAggregatedPortsThe complete set of ports currently aggregated in
this Aggregator.ro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.3320.2.232.1.1.2.1.2 |
dot3adAggPort OBJECT IDENTIFIER .1.3.6.1.4.1.3320.2.232.1.2 |
dot3adAggPortTableA table that contains Link Aggregation Control
configuration information about every
Aggregation Port associated with this device.
A row appears in this table for each physical port. SEQUENCE OF Dot3adAggPortEntry .1.3.6.1.4.1.3320.2.232.1.2.1 |
dot3adAggPortEntryA list of Link Aggregation Control configuration
parameters for each Aggregation Port on this device. Dot3adAggPortEntry .1.3.6.1.4.1.3320.2.232.1.2.1.1 |
dot3adAggPortIndexThe ifIndex of the port InterfaceIndex (IF-MIB) .1.3.6.1.4.1.3320.2.232.1.2.1.1.1 |
dot3adAggPortActorSystemPriorityA 2-octet read-write value used to define the priority
value associated with the Actor's System ID.ro INTEGER .1.3.6.1.4.1.3320.2.232.1.2.1.1.2 |
dot3adAggPortActorSystemIDA 6-octet read-only MAC address value that defines the
value of the System ID for the System that contains this
Aggregation Port.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.3320.2.232.1.2.1.1.3 |
dot3adAggPortActorAdminKeyThe current administrative value of the Key for the
Aggregation Port. This is a 16-bit read-only value.
The meaning of particular Key values is of local
significance.ro LacpKey .1.3.6.1.4.1.3320.2.232.1.2.1.1.4 |
dot3adAggPortActorOperKeyThe current operational value of the Key for the
Aggregation Port. This is a 16-bit read-only value.
The meaning of particular Key values is of local
significance.ro LacpKey .1.3.6.1.4.1.3320.2.232.1.2.1.1.5 |
dot3adAggPortPartnerAdminSystemPriorityA 2-octet read-only value used to define the
administrative value of priority associated with the
Partner's System ID. The assigned value is used, along
with the value of aAggPortPartnerAdminSystemID,
aAggPortPartnerAdminKey, aAggPortPartnerAdminPort, and
aAggPortPartnerAdminPortPriority, in order to achieve
manually configured aggregation.ro INTEGER .1.3.6.1.4.1.3320.2.232.1.2.1.1.6 |
dot3adAggPortPartnerOperSystemPriorityA 2-octet read-only value indicating the operational
value of priority associated with the Partner's System
ID. The value of this attribute may contain the manually
configured value carried in
aAggPortPartnerAdminSystemPriority if there is no
protocol Partner.ro INTEGER .1.3.6.1.4.1.3320.2.232.1.2.1.1.7 |
dot3adAggPortPartnerAdminSystemIDA 6-octet read-only MACAddress value representing the
administrative value of the Aggregation Port's protocol
Partner's System ID. The assigned value is used, along
with the value of aAggPortPartnerAdminSystemPriority,
aAggPortPartnerAdminKey, aAggPortPartnerAdminPort, and
aAggPortPartnerAdminPortPriority, in order to achieve
manually configured aggregation.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.3320.2.232.1.2.1.1.8 |
dot3adAggPortPartnerOperSystemIDA 6-octet read-only MACAddress value representing the
current value of the Aggregation Port's protocol
Partner's System ID. A value of zero indicates that
there is no known protocol Partner. The value of this
attribute may contain the manually configured value
carried in aAggPortPartnerAdminSystemID if there is no
protocol Partner.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.3320.2.232.1.2.1.1.9 |
dot3adAggPortPartnerAdminKeyThe current administrative value of the Key for the
protocol Partner. This is a 16-bit read-only value.
The assigned value is used, along with the value of
aAggPortPartnerAdminSystemPriority,
aAggPortPartnerAdminSystemID, aAggPortPartnerAdminPort,
and aAggPortPartnerAdminPortPriority, in order to
achieve manually configured aggregation.ro LacpKey .1.3.6.1.4.1.3320.2.232.1.2.1.1.10 |
dot3adAggPortPartnerOperKeyThe current operational value of the Key for the
protocol Partner. The value of this attribute may
contain the manually configured value carried in
aAggPortPartnerAdminKey if there is no protocol Partner.
This is a 16-bit read-only value.ro LacpKey .1.3.6.1.4.1.3320.2.232.1.2.1.1.11 |
dot3adAggPortSelectedAggIDThe identifier value of the Aggregator that this
Aggregation Port has currently selected. Zero indicates
that the Aggregation Port has not selected an
Aggregator, either because it is in the process of
detaching from an Aggregator or because there is no
suitable Aggregator available for it to select.
This value is read-only.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.3320.2.232.1.2.1.1.12 |
dot3adAggPortAttachedAggIDThe identifier value of the Aggregator that this
Aggregation Port is currently attached to. Zero
indicates that the Aggregation Port is not currently
attached to an Aggregator. This value is read-only.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.3320.2.232.1.2.1.1.13 |
dot3adAggPortActorPortThe port number locally assigned to the Aggregation
Port. The port number is communicated in LACPDUs as the
Actor_Port. This value is read-only.ro INTEGER .1.3.6.1.4.1.3320.2.232.1.2.1.1.14 |
dot3adAggPortActorPortPriorityThe priority value assigned to this Aggregation Port.
This 16-bit value is read-only.ro INTEGER .1.3.6.1.4.1.3320.2.232.1.2.1.1.15 |
dot3adAggPortPartnerAdminPortThe current administrative value of the port number for
the protocol Partner. This is a 16-bit read-only value.
The assigned value is used, along with the value of
aAggPortPartnerAdminSystemPriority,
aAggPortPartnerAdminSystemID, aAggPortPartnerAdminKey,
and aAggPortPartnerAdminPortPriority, in order to
achieve manually configured aggregation.ro INTEGER .1.3.6.1.4.1.3320.2.232.1.2.1.1.16 |
dot3adAggPortPartnerOperPortThe operational port number assigned to this
Aggregation Port by the Aggregation Port's protocol
Partner. The value of this attribute may contain the
manually configured value carried in
aAggPortPartnerAdminPort if there is no protocol
Partner. This 16-bit value is read-only.ro INTEGER .1.3.6.1.4.1.3320.2.232.1.2.1.1.17 |
dot3adAggPortPartnerAdminPortPriorityThe current administrative value of the port priority
for the protocol Partner. This is a 16-bit read-only
value. The assigned value is used, along with the value
of aAggPortPartnerAdminSystemPriority,
aAggPortPartnerAdminSystemID, aAggPortPartnerAdminKey,
and aAggPortPartnerAdminPort, in order to achieve
manually configured aggregation.ro INTEGER .1.3.6.1.4.1.3320.2.232.1.2.1.1.18 |
dot3adAggPortPartnerOperPortPriorityThe priority value assigned to this Aggregation Port by
the Partner. The value of this attribute may contain the
manually configured value carried in
aAggPortPartnerAdminPortPriority if there is no protocol
Partner. This 16-bit value is read-only.ro INTEGER .1.3.6.1.4.1.3320.2.232.1.2.1.1.19 |
dot3adAggPortActorAdminStateA string of 8 bits, corresponding to the administrative
values of Actor_State (43.4.2) as transmitted by the
Actor in LACPDUs. The first bit corresponds to bit 0 of
Actor_State (LACP_Activity),
the second bit corresponds to bit 1 (LACP_Timeout),
the third bit corresponds to bit 2 (Aggregation),
the fourth bit corresponds to bit 3 (Synchronization),
the fifth bit corresponds to bit 4 (Collecting),
the sixth bit corresponds to bit 5 (Distributing),
the seventh bit corresponds to bit 6 (Defaulted),
and the eighth bit corresponds to bit 7 (Expired).
These values allow administrative control over the
values of LACP_Activity, LACP_Timeout and Aggregation.
This attribute value is read-only.ro LacpState .1.3.6.1.4.1.3320.2.232.1.2.1.1.20 |
dot3adAggPortActorOperStateA string of 8 bits, corresponding to the current
operational values of Actor_State as transmitted by the
Actor in LACPDUs. The bit allocations are as defined in
30.7.2.1.20. This attribute value is read-only.ro LacpState .1.3.6.1.4.1.3320.2.232.1.2.1.1.21 |
dot3adAggPortPartnerAdminStateA string of 8 bits, corresponding to the current
administrative value of Actor_State for the protocol
Partner. The bit allocations are as defined in
30.7.2.1.20. This attribute value is read-only. The
assigned value is used in order to achieve manually
configured aggregation.ro LacpState .1.3.6.1.4.1.3320.2.232.1.2.1.1.22 |
dot3adAggPortPartnerOperStateA string of 8 bits, corresponding to the current values
of Actor_State in the most recently received LACPDU
transmitted by the protocol Partner. The bit allocations
are as defined in 30.7.2.1.20. In the absence of an
active protocol Partner, this value may reflect the
manually configured value aAggPortPartnerAdminState.
This attribute value is read-only.ro LacpState .1.3.6.1.4.1.3320.2.232.1.2.1.1.23 |
dot3adAggPortAggregateOrIndividualA read-only Boolean value indicating whether the
Aggregation Port is able to Aggregate (`TRUE') or is
only able to operate as an Individual link (`FALSE').ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3320.2.232.1.2.1.1.24 |
dot3adAggPortOperModeThe running link aggregation control mode.ro LagMode .1.3.6.1.4.1.3320.2.232.1.2.1.1.25 |
dot3adAggPortStatsTableA table that contains Link Aggregation information
about every port that is associated with this device.
A row appears in this table for each physical port. SEQUENCE OF Dot3adAggPortStatsEntry .1.3.6.1.4.1.3320.2.232.1.2.2 |
dot3adAggPortStatsEntryA list of Link Aggregation Control Protocol statistics
for each port on this device. Dot3adAggPortStatsEntry .1.3.6.1.4.1.3320.2.232.1.2.2.1 |
dot3adAggPortStatsLACPDUsRxThe number of valid LACPDUs received on this
Aggregation Port. This value is read-only.ro Counter32 .1.3.6.1.4.1.3320.2.232.1.2.2.1.1 |
dot3adAggPortStatsMarkerPDUsRxThe number of valid Marker PDUs received on this
Aggregation Port. This value is read-only.ro Counter32 .1.3.6.1.4.1.3320.2.232.1.2.2.1.2 |
dot3adAggPortStatsMarkerResponsePDUsRxThe number of valid Marker Response PDUs received on
this Aggregation Port. This value is read-only.ro Counter32 .1.3.6.1.4.1.3320.2.232.1.2.2.1.3 |
dot3adAggPortStatsUnknownRxThe number of frames received that either:
- carry the Slow Protocols Ethernet Type value (43B.4),
but contain an unknown PDU, or:
- are addressed to the Slow Protocols group MAC
Address (43B.3), but do not carry the Slow Protocols
Ethernet Type.
This value is read-only.ro Counter32 .1.3.6.1.4.1.3320.2.232.1.2.2.1.4 |
dot3adAggPortStatsIllegalRxThe number of frames received that carry the Slow
Protocols Ethernet Type value (43B.4), but contain a
badly formed PDU or an illegal value of Protocol Subtype
(43B.4). This value is read-only.ro Counter32 .1.3.6.1.4.1.3320.2.232.1.2.2.1.5 |
dot3adAggPortStatsLACPDUsTxThe number of LACPDUs transmitted on this
Aggregation Port. This value is read-only.ro Counter32 .1.3.6.1.4.1.3320.2.232.1.2.2.1.6 |
dot3adAggPortStatsMarkerPDUsTxThe number of Marker PDUs transmitted on this
Aggregation Port. This value is read-only.ro Counter32 .1.3.6.1.4.1.3320.2.232.1.2.2.1.7 |
dot3adAggPortStatsMarkerResponsePDUsTxThe number of Marker Response PDUs transmitted
on this Aggregation Port. This value is read-only.ro Counter32 .1.3.6.1.4.1.3320.2.232.1.2.2.1.8 |
dot3adAggPortDebugTableA table that contains Link Aggregation debug
information about every port that is associated with
this device. A row appears in this table for each
physical port. SEQUENCE OF Dot3adAggPortDebugEntry .1.3.6.1.4.1.3320.2.232.1.2.3 |
dot3adAggPortDebugEntryA list of the debug parameters for a port. Dot3adAggPortDebugEntry .1.3.6.1.4.1.3320.2.232.1.2.3.1 |
dot3adAggPortDebugRxStateThis attribute holds the value `currentRx' if the
Receive state machine for the Aggregation Port is in the
CURRENT state, `expired' if the Receive state machine is
in the EXPIRED state, `defaulted' if the Receive state
machine is in the DEFAULTED state, `initialize' if the
Receive state machine is in the INITIALIZE state,
`lacpDisabled' if the Receive state machine is in the
LACP_DISABLED state, or `portDisabled' if the Receive
state machine is in the PORT_DISABLED state.
This value is read-only.ro Enumeration .1.3.6.1.4.1.3320.2.232.1.2.3.1.1 |
dot3adAggPortDebugLastRxTimeThe value of aTimeSinceSystemReset (F.2.1) when
the last LACPDU was received by this Aggregation Port.
This value is read-only.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.3320.2.232.1.2.3.1.2 |
dot3adAggPortDebugMuxStateThis attribute holds the value `detached' if the Mux
state machine (43.4.14) for the Aggregation Port is in
the DETACHED state, `waiting' if the Mux state machine
is in the WAITING state, `attached' if the Mux state
machine for the Aggregation Port is in the ATTACHED
state, `collecting' if the Mux state machine for the
Aggregation Port is in the COLLECTING state,
`distributing' if the Mux state machine for the
Aggregation Port is in the DISTRIBUTING state, and
`collectingDistributing' if the Mux state machine for
the Aggregation Port is in the COLLECTING_DISTRIBUTING
state. This value is read-only.ro Enumeration .1.3.6.1.4.1.3320.2.232.1.2.3.1.3 |
dot3adAggPortDebugMuxReasonA human-readable text string indicating the reason
for the most recent change of Mux machine state.
This value is read-only.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3320.2.232.1.2.3.1.4 |
dot3adAggPortDebugActorChurnStateThe state of the Actor Churn Detection machine
(43.4.17) for the Aggregation Port. A value of `noChurn'
indicates that the state machine is in either the
NO_ACTOR_CHURN or the ACTOR_CHURN_MONITOR state, and
`churn' indicates that the state machine is in the
ACTOR_CHURN state. This value is read-only.ro ChurnState .1.3.6.1.4.1.3320.2.232.1.2.3.1.5 |
dot3adAggPortDebugPartnerChurnStateThe state of the Partner Churn Detection machine
(43.4.17) for the Aggregation Port. A value of `noChurn'
indicates that the state machine is in either the
NO_PARTNER_CHURN or the PARTNER_CHURN_MONITOR state, and
`churn' indicates that the state machine is in the
PARTNER_CHURN state. This value is read-only.ro ChurnState .1.3.6.1.4.1.3320.2.232.1.2.3.1.6 |
dot3adAggPortDebugActorChurnCountCount of the number of times the Actor Churn state
machine has entered the ACTOR_CHURN state.
This value is read-only.ro Counter32 .1.3.6.1.4.1.3320.2.232.1.2.3.1.7 |
dot3adAggPortDebugPartnerChurnCountCount of the number of times the Partner Churn
state machine has entered the PARTNER_CHURN state.
This value is read-only.ro Counter32 .1.3.6.1.4.1.3320.2.232.1.2.3.1.8 |
dot3adAggPortDebugActorSyncTransitionCountCount of the number of times the Actor's Mux state
machine (43.4.15) has entered the IN_SYNC state.
This value is read-only.ro Counter32 .1.3.6.1.4.1.3320.2.232.1.2.3.1.9 |
dot3adAggPortDebugPartnerSyncTransitionCountCount of the number of times the Partner's Mux
state machine (43.4.15) has entered the IN_SYNC state.
This value is read-only.ro Counter32 .1.3.6.1.4.1.3320.2.232.1.2.3.1.10 |
dot3adAggPortDebugActorChangeCountCount of the number of times the Actor's perception of
the LAG ID for this Aggregation Port has changed.
This value is read-only.ro Counter32 .1.3.6.1.4.1.3320.2.232.1.2.3.1.11 |
dot3adAggPortDebugPartnerChangeCountCount of the number of times the Partner's perception
of the LAG ID (see 43.3.6.1) for this Aggregation Port
has changed. This value is read-only.ro Counter32 .1.3.6.1.4.1.3320.2.232.1.2.3.1.12 |
dot3adTablesLastChangedThis object indicates the time of the most recent
change to the dot3adAggTable, dot3adAggPortListTable, or
dot3adAggPortTable.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.3320.2.232.1.3 |
dot3adAggMaxNumA value indicates the max number of Aggregators
supported in the system.ro INTEGER .1.3.6.1.4.1.3320.2.232.1.4 |
dot3adAggPortsMaxNumA value indicates the max number of aggregated ports
in one Aggregator.ro INTEGER .1.3.6.1.4.1.3320.2.232.1.5 |
dot3adAggConformance OBJECT IDENTIFIER .1.3.6.1.4.1.3320.2.232.2 |
dot3adAggGroups OBJECT IDENTIFIER .1.3.6.1.4.1.3320.2.232.2.1 |
dot3adAggCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.3320.2.232.2.2 |