NMS-HAL-IF-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for NMS-HAL-IF-MIB.
48
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
48 total| Object Name |
|---|
physicalIfConfigTableA list of physical interface configuration entries. SEQUENCE OF PhysicalIfConfigEntry .1.3.6.1.4.1.3320.9.63.1.3 |
physicalIfConfigEntryAn interface configuration entry containing objects at the
subnetwork layer and below for a particular interface. PhysicalIfConfigEntry .1.3.6.1.4.1.3320.9.63.1.3.1 |
ifConfigIndexIndex of interface. The same value as ifIndex in ifTable of RFC1213.ro INTEGER .1.3.6.1.4.1.3320.9.63.1.3.1.1 |
keepaliveLoopback detect of interface. The range is 0-32767. 0 means disable. Default is 0(disable).rw INTEGER .1.3.6.1.4.1.3320.9.63.1.3.1.2 |
speedInterface speed. Only valid for non-PON interface. 1-auto, 2-10M, 3-100M, 4-1000M, 5-10000M. Default is auto.rw Enumeration .1.3.6.1.4.1.3320.9.63.1.3.1.3 |
duplexInterface duplex. Only valid for non-PON interface. 1-auto, 2-full, 3-half. Default is auto.rw Enumeration .1.3.6.1.4.1.3320.9.63.1.3.1.4 |
mediumInterface medium. Only valid for non-PON interface. 1-auto, 2-copper, 3-fiber. Default is auto.rw Enumeration .1.3.6.1.4.1.3320.9.63.1.3.1.5 |
fiberAutoConfigFiber port auto config mode, include speed and duplex. 1-enable, 2-disable. Default is disable.rw Enumeration .1.3.6.1.4.1.3320.9.63.1.3.1.6 |
flowControlInterface flow control config. 1-on, 2-off. Default is off.rw Enumeration .1.3.6.1.4.1.3320.9.63.1.3.1.7 |
errorFrameCheckError frame check config. 1-enable, 2-disable. Default is disable.rw Enumeration .1.3.6.1.4.1.3320.9.63.1.3.1.8 |
phyIfTypePort initial type. 1-copper, 2-fiber, 3-combo, 4-other.ro Enumeration .1.3.6.1.4.1.3320.9.63.1.3.1.9 |
physicalIfBlockTableA list of physical interface Block entries. SEQUENCE OF PhysicalIfBlockEntry .1.3.6.1.4.1.3320.9.63.1.4 |
physicalIfBlockEntryAn interface Block entry containing objects at the
subnetwork layer and below for a particular interface. PhysicalIfBlockEntry .1.3.6.1.4.1.3320.9.63.1.4.1 |
ifBlockIndexIndex of interface. The same value as ifIndex in ifTable of RFC1213.ro INTEGER .1.3.6.1.4.1.3320.9.63.1.4.1.1 |
broadcastBlockBroadcast block config. 1-enable, 2-disable. Default is disable.rw Enumeration .1.3.6.1.4.1.3320.9.63.1.4.1.2 |
multicastBlockMulticast block config. 1-enable, 2-disable. Default is disable.rw Enumeration .1.3.6.1.4.1.3320.9.63.1.4.1.3 |
unicastBlockUnknown unicast block config. 1-enable, 2-disable. Default is disable.rw Enumeration .1.3.6.1.4.1.3320.9.63.1.4.1.4 |
ifSecurity OBJECT IDENTIFIER .1.3.6.1.4.1.3320.9.63.1.5 |
portSecurityTableA list of interface security entries. SEQUENCE OF PortSecurityEntry .1.3.6.1.4.1.3320.9.63.1.5.1 |
portSecurityEntryAn interface security entry containing objects at the
subnetwork layer and below for a particular interface. PortSecurityEntry .1.3.6.1.4.1.3320.9.63.1.5.1.1 |
ifSecurityIndexIndex of interface. The same value as ifIndex in ifTable of RFC1213.ro INTEGER .1.3.6.1.4.1.3320.9.63.1.5.1.1.1 |
maxMacAddressNumMax mac address number that interface is allowed learning. Min num is 1.
Max num is different for different device. Default is 1.rw INTEGER .1.3.6.1.4.1.3320.9.63.1.5.1.1.3 |
maxMacAddressNumCapabilityCapability of mac address learning limitation.ro INTEGER .1.3.6.1.4.1.3320.9.63.1.5.1.1.4 |
portSecurityStaticMacAddressTableA list of interface security static MAC address entries. SEQUENCE OF PortSecurityStaticMacAddressEntry .1.3.6.1.4.1.3320.9.63.1.5.2 |
portSecurityStaticMacAddressEntryAn interface security static mac address entry containing objects at the
subnetwork layer and below for a particular interface. PortSecurityStaticMacAddressEntry .1.3.6.1.4.1.3320.9.63.1.5.2.1 |
ifSecurityStaticMacAddrIndexIndexs of interface. The same value as ifIndex in ifTable of RFC1213.ro INTEGER .1.3.6.1.4.1.3320.9.63.1.5.2.1.1 |
ifMacAddressIndexs of interface. Static mac address of port security.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.3320.9.63.1.5.2.1.2 |
operationThe operation of static mac address. 1-add, 2-delete.rw Enumeration .1.3.6.1.4.1.3320.9.63.1.5.2.1.3 |
portSecurityBindBlockTableA list of interface security binding block entries. SEQUENCE OF PortSecurityBindBlockEntry .1.3.6.1.4.1.3320.9.63.1.5.3 |
portSecurityBindBlockEntryAn interface security binding block entry containing objects at the
subnetwork layer and below for a particular interface. PortSecurityBindBlockEntry .1.3.6.1.4.1.3320.9.63.1.5.3.1 |
ifSecurityBindBlockIndexIndexs of interface. The same value as ifIndex in ifTable of RFC1213.ro INTEGER .1.3.6.1.4.1.3320.9.63.1.5.3.1.1 |
ifBindBlockMacAddressIndexs of interface. MAC address. If not care mac address, the value should be set to FFFFFF.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.3320.9.63.1.5.3.1.2 |
ifBindBlockIPAddressIndexs of interface. Ip address. If not care ip address, the value should be set to 255.255.255.255 .rw IpAddress .1.3.6.1.4.1.3320.9.63.1.5.3.1.3 |
ifBindBlockIPV6AddressIndexs of interface. Ipv6 address. If not care ipv6 address, all bit value should be set to 1.rw OCTET STRING .1.3.6.1.4.1.3320.9.63.1.5.3.1.4 |
modeThe config mode.0:del,1:bind mac,2:bind ip,3:bind arp,4:bind arp ip,5:bind ip mac,6:bind arp mac,
7:bind arp ip mac,8:bind ipv6,9:bind ipv6 mac,10:block mac,11:block ip ,12:block arp,13:block arp ip,
14:block ip mac,15:block arp mac,16:block arp ip mac,17:block ipv6,18:block ipv6 macrw Enumeration .1.3.6.1.4.1.3320.9.63.1.5.3.1.5 |
vlanSecurityTableA list of VLAN security entries. SEQUENCE OF VlanSecurityEntry .1.3.6.1.4.1.3320.9.63.1.5.4 |
vlanSecurityEntryAn interface VLAN security entry containing objects at the
subnetwork layer and below for a particular interface. VlanSecurityEntry .1.3.6.1.4.1.3320.9.63.1.5.4.1 |
securityVlanIDVlanID to config. The range is 1-4094ro INTEGER .1.3.6.1.4.1.3320.9.63.1.5.4.1.1 |
dynamicMacAddressThe max number of mac address to be learned. The range is 1-32768. 0 means disable. Default is disable.rw INTEGER .1.3.6.1.4.1.3320.9.63.1.5.4.1.2 |
ifProtect OBJECT IDENTIFIER .1.3.6.1.4.1.3320.9.63.1.6 |
portProtectGroupTableA list of port Protect Group entries. SEQUENCE OF PortProtectGroupEntry .1.3.6.1.4.1.3320.9.63.1.6.1 |
portProtectGroupEntryAn interface port Protect Group entry containing objects at the
subnetwork layer and below for a particular interface. PortProtectGroupEntry .1.3.6.1.4.1.3320.9.63.1.6.1.1 |
groupIDThe groupID of port protect. The range is 1-32.rw INTEGER .1.3.6.1.4.1.3320.9.63.1.6.1.1.1 |
ifProtectGroupOperationThe operation of group. 1-add, 2-delete.rw Enumeration .1.3.6.1.4.1.3320.9.63.1.6.1.1.2 |
portProtectAppTableA list of port Protect Application entries. SEQUENCE OF PortProtectAppEntry .1.3.6.1.4.1.3320.9.63.1.6.2 |
portProtectAppEntryAn interface port Protect Application entry containing objects at the
subnetwork layer and below for a particular interface. PortProtectAppEntry .1.3.6.1.4.1.3320.9.63.1.6.2.1 |
ifProtectAppIndexIndexs of interface. The same value as ifIndex in ifTable of RFC1213.ro INTEGER .1.3.6.1.4.1.3320.9.63.1.6.2.1.1 |
ifGroupIDAppThe groupID of port protect. The range is 1-32. The same value as groupID in portProtectGroupEntry.rw INTEGER .1.3.6.1.4.1.3320.9.63.1.6.2.1.2 |