NMS-IF-MIB
Analog Voice Interface MIB module. This MIB manages the E&M, FXO, FXS Interfaces in the router.
Main OID:
nmsIfMIB.1.3.6.1.4.1.3320.9.63
32
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
32 total| Object Name |
|---|
nmsIfMIBAnalog Voice Interface MIB module.
This MIB manages the E&M, FXO, FXS
Interfaces in the router. MODULE-IDENTITY .1.3.6.1.4.1.3320.9.63 |
nmsIfObjects OBJECT IDENTIFIER .1.3.6.1.4.1.3320.9.63.1 |
vifTableA list of voice interface entries. The number of
entries is given by the value of ifNumber. SEQUENCE OF VIfEntry .1.3.6.1.4.1.3320.9.63.1.1 |
vifEntryAn interface entry containing objects at the
subnetwork layer and below for a particular
interface. VIfEntry .1.3.6.1.4.1.3320.9.63.1.1.1 |
vifIndexA unique value for each voice interface. Its value
ranges between 1 and the value of vifNumber. The
value for each voice interface must remain constant at
least from one re-initialization of the entity's
network management system to the next re-
initialization.ro INTEGER .1.3.6.1.4.1.3320.9.63.1.1.1.1 |
vifDescrA textual string containing information about the
voice interface. This string should include the name of
the manufacturer, the product name and the version
of the hardware interface.ro DisplayString .1.3.6.1.4.1.3320.9.63.1.1.1.2 |
vifTypeThe type of Voice interface, distinguished according to
the physical/link protocol(s) immediately `below'
the network layer in the protocol stack.ro Enumeration .1.3.6.1.4.1.3320.9.63.1.1.1.3 |
vifMtuThe size of the largest datagram which can be
sent/received on the voice interface, specified in
octets. in fact,for voice interface,this value should be 0ro INTEGER .1.3.6.1.4.1.3320.9.63.1.1.1.4 |
vifSpeedcontains a zero value.ro Gauge .1.3.6.1.4.1.3320.9.63.1.1.1.5 |
vifPhysAddresscontains an octet string of zero length.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.3320.9.63.1.1.1.6 |
vifAdminStatusThe desired administrative status of the
Analog Telephony interface port.rw Enumeration .1.3.6.1.4.1.3320.9.63.1.1.1.7 |
vifOperStatusThe current operational state of the interface.
The testing(3) state indicates that no operational
packets can be passed.ro Enumeration .1.3.6.1.4.1.3320.9.63.1.1.1.8 |
vifLastChangeThe value of sysUpTime at the time the interface
entered its current operational state. If the
current state was entered prior to the last re-
initialization of the local network management
subsystem, then this object contains a zero
value.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.3320.9.63.1.1.1.9 |
ifStormControlTableA list of interface entries. The number of
entries is given by the value of ifNumber. SEQUENCE OF IfStormControlEntry .1.3.6.1.4.1.3320.9.63.1.2 |
ifStormControlEntryAn interface entry containing objects at the
subnetwork layer and below for a particular
interface. IfStormControlEntry .1.3.6.1.4.1.3320.9.63.1.2.1 |
ifStormControlBroadcastInterface Storm Control Broadcast, range is 10-1000000kbpsrw INTEGER .1.3.6.1.4.1.3320.9.63.1.2.1.2 |
ifStormControlMulticastInterface Storm Control Multicast, range is 10-1000000kbpsrw INTEGER .1.3.6.1.4.1.3320.9.63.1.2.1.3 |
ifStormControlUnicastInterface Storm Control Unicast, range is 10-1000000kbpsrw INTEGER .1.3.6.1.4.1.3320.9.63.1.2.1.4 |
ifSfpParameterTableA list of sfp property table entries. SEQUENCE OF IfSfpParameterEntry .1.3.6.1.4.1.3320.9.63.1.7 |
ifSfpParameterEntryA collection of additional objects in the
sfp property table. IfSfpParameterEntry .1.3.6.1.4.1.3320.9.63.1.7.1 |
txPowerThe tx power of optical module. The unit is 1DBm.ro INTEGER .1.3.6.1.4.1.3320.9.63.1.7.1.2 |
rxPowerThe rx power of optical module. The unit is 1DBm.ro INTEGER .1.3.6.1.4.1.3320.9.63.1.7.1.3 |
temperatureSfp module temperature. The unit is 1/256 degree.ro INTEGER .1.3.6.1.4.1.3320.9.63.1.7.1.4 |
vlotageSfp module volt. The unit is 0.1mV.ro INTEGER .1.3.6.1.4.1.3320.9.63.1.7.1.5 |
currSfp module bias current. The unit is 2uA.ro INTEGER .1.3.6.1.4.1.3320.9.63.1.7.1.6 |
vendnameSfp module vend name.ro OCTET STRING .1.3.6.1.4.1.3320.9.63.1.7.1.7 |
cableDiagnoseTableA interface list of cable diagnose table entries. SEQUENCE OF CableDiagnoseEntry .1.3.6.1.4.1.3320.9.63.1.8 |
cableDiagnoseEntryA collection of cable diagnose objects in the
interface table. CableDiagnoseEntry .1.3.6.1.4.1.3320.9.63.1.8.1 |
ifIndexThe only diid of port in System.ro INTEGER .1.3.6.1.4.1.3320.9.63.1.8.1.1 |
enableenable=1,disable=2.rw Enumeration .1.3.6.1.4.1.3320.9.63.1.8.1.2 |
periodperiod=0 means manual scanning, the range of auto scanning period is 1-32767.rw INTEGER .1.3.6.1.4.1.3320.9.63.1.8.1.3 |
descriptioncable diagnoisis descpription.ro INTEGER .1.3.6.1.4.1.3320.9.63.1.8.1.4 |