NETBOTZ-DEVICE-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
35
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
35 total| Object Name |
|---|
IMPORTSNetbotz device's host name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5528.50.1 |
netBotz-dev-domainNetbotz device's default DNS domain.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5528.50.2 |
netBotz-dev-ipNetbotz device's IP address.rw IpAddress .1.3.6.1.4.1.5528.50.3 |
netBotz-dev-netmaskNetbotz device's netmask.rw IpAddress .1.3.6.1.4.1.5528.50.4 |
netBotz-dev-gatewayNetbotz device's default gateway/router. 0.0.0.0 if not defined.rw IpAddress .1.3.6.1.4.1.5528.50.5 |
netBotz-dev-primarydnsPrimary Domain Name Server. 0.0.0.0 if not defined.rw IpAddress .1.3.6.1.4.1.5528.50.6 |
netBotz-dev-secondarydnsSecondary Domain Name Server. 0.0.0.0 if not defined.rw IpAddress .1.3.6.1.4.1.5528.50.7 |
netBotz-dev-smtpSMTP server address. This is the mail server used for sending alert e-mails.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5528.50.8 |
netBotz-dev-smtpportSMTP port. Port number of SMTP server used for sending alert e-mails.rw INTEGER .1.3.6.1.4.1.5528.50.9 |
netBotz-dev-popportPOP port. Currently, not used.rw INTEGER .1.3.6.1.4.1.5528.50.10 |
netBotz-dev-loglevelThis field contains the log level of the Netbotz device.
Log messages will be filtered, so that only same or lower-level
messages will be passed. The default log level is 5, for warnings
and lower levels. The log levels are the following:
1 - emergency
2 - alert
3 - critical
4 - error
5 - warning
6 - notice
7 - info
8 - tracerw INTEGER .1.3.6.1.4.1.5528.50.11 |
netBotz-dev-logaddressThis field contains an IP address to receive log messages
from the Netbotz device. 0.0.0.0 for no external logging.rw IpAddress .1.3.6.1.4.1.5528.50.12 |
netBotz-dev-logportPort to use in conjunction with the log address,
for log messages from the Netbotz device to be sent to an
external IP address. 0 = no external logging.rw INTEGER .1.3.6.1.4.1.5528.50.13 |
netBotz-dev-primaryemailThe primary email addresses for alerts and messages (list separated by commas for multiple addresses).rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5528.50.14 |
netBotz-dev-secondaryemailThe secondary email address for alerts and messages (list separated by commas for multiple addresses).rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5528.50.15 |
netBotz-dev-pagerThe pager number for alerts and messages. Currently, not used.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5528.50.16 |
netBotz-dev-serialnoThe serial number of the Netbotz device.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5528.50.17 |
netBotz-dev-popPOP server name. Currently, not used.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5528.50.18 |
netBotz-dev-versionThe current NetBotz device firmware version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5528.50.19 |
netBotz-dev-registeredIndicates if the device has been registered with Netbotz, Inc. 1=registered, 0=not registered.ro INTEGER .1.3.6.1.4.1.5528.50.20 |
netBotz-default-appletSetting to control if default web page should launch applet by default(1) or the HTML status page(0).rw INTEGER .1.3.6.1.4.1.5528.50.21 |
netBotz-guibar-colorSetting for color of GUI bar (RGB). Value = 0xRRGGBB.rw INTEGER .1.3.6.1.4.1.5528.50.22 |
netBotz-localeThe locale ID of the NetBotz device. Format is ISO 639 language (lower case),
an underscore, and ISO 3166 country (upper case). Some locales are just the ISO 639 language code.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5528.50.23 |
netBotz-timezoneThe timezone ID of the NetBotz device.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5528.50.24 |
netBotz-24hourpreferredIndicates if 24-hour(1) versus 12-hour(0) time format is preferred.rw INTEGER .1.3.6.1.4.1.5528.50.25 |
netBotz-utc-clockCurrent time of clock on NetBotz device, in UTC seconds (seconds since 1/1/1970 12:00am GMT).rw INTEGER .1.3.6.1.4.1.5528.50.26 |
netBotz-ismetricUnits are metric (1) or U.S. (0). Applies to temperature and airflow rate.ro INTEGER .1.3.6.1.4.1.5528.50.27 |
netBotz-alert-urlThe URL, if defined, to which non-picture alerts are HTTP POSTedrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5528.50.28 |
netBotz-picture-alert-urlThe URL, if defined, to which picture alerts are HTTP POSTed, using multipart/form-data
encoding.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5528.50.29 |
netBotz-sensor-data-urlThe URL, if defined, to which sensor data is periodically HTTP POSTed.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5528.50.30 |
netBotz-alert-url-logonThe user ID and password, if defined, used for POSTing non-picture alerts.
Field is write-only, and formatted <username>/<password>rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5528.50.31 |
netBotz-picture-alert-url-logonThe user ID and password, if defined, used for POSTing picture alerts.
Field is write-only, and formatted <username>/<password>rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5528.50.32 |
netBotz-sensor-data-url-logonThe user ID and password, if defined, used for POSTing sensor data.
Field is write-only, and formatted <username>/<password>rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5528.50.33 |
netBotz-sensor-data-url-periodDefault number of minutes between periodic sensor data HTTP POSTs.rw INTEGER .1.3.6.1.4.1.5528.50.34 |
netBotz-sensor-data-url-flagsOption flags for data POSTs of sensor data. Bit 0=1 if current picture
should be included. Bits 1-31 are reserved.rw INTEGER .1.3.6.1.4.1.5528.50.35 |