MY-AAA-MIB
AI MIB Summary
The MY-AAA-MIB module enables monitoring and management of 802.1X authentication, authorization, and accounting (AAA) events, specifically tracking active session states, authentication failures, and accounting record counters for network access control devices.
This module defines my AAA(802.1x) mibs.
Main OID:
myAAAMIB.1.3.6.1.4.1.171.10.97.2.19
92
Objects
Active
Status
9
Dependencies
Imported Objects
Objects
92 total| Object Name |
|---|
myAAAMIBThis module defines my AAA(802.1x) mibs. MODULE-IDENTITY .1.3.6.1.4.1.171.10.97.2.19 |
myAAAMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.97.2.19.1 |
myDot1xAuthObjects OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.97.2.19.1.1 |
myDot1xAuthStatusThe enable(1)/disable(2) control used by the
802.1x global settings.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.171.10.97.2.19.1.1.1 |
myDot1xAuthObjectsQuietPeriodThe value, in seconds, of the quietPeriod constant
currently in use by the Authenticator PAE state
machine.rw Unsigned32 .1.3.6.1.4.1.171.10.97.2.19.1.1.2 |
myDot1xAuthObjectsTxPeriodThe value, in seconds, of the txPeriod constant
currently in use by the Authenticator PAE state
machine.rw Unsigned32 .1.3.6.1.4.1.171.10.97.2.19.1.1.3 |
myDot1xAuthObjectsSuppTimeoutThe value, in seconds, of the suppTimeout constant
currently in use by the Backend Authentication state
machine.rw Unsigned32 .1.3.6.1.4.1.171.10.97.2.19.1.1.4 |
myDot1xAuthObjectsServerTimeoutThe value, in seconds, of the serverTimeout constant
currently in use by the Backend Authentication state
machine.rw Unsigned32 .1.3.6.1.4.1.171.10.97.2.19.1.1.5 |
myDot1xAuthObjectsMaxReqThe value of the maxReq constant currently in use by
the Backend Authentication state machine.rw Unsigned32 .1.3.6.1.4.1.171.10.97.2.19.1.1.6 |
myDot1xAuthObjectsReAuthPeriodThe value, in seconds, of the reAuthPeriod constant
currently in use by the Reauthentication Timer state
machine.rw Unsigned32 .1.3.6.1.4.1.171.10.97.2.19.1.1.7 |
myDot1xAuthObjectsMaxReauthThe value of the reAuthMax constant currently in use by
the Authenticator PAE state machine.rw Unsigned32 .1.3.6.1.4.1.171.10.97.2.19.1.1.8 |
myDot1xAuthObjectsReAuthEnableThe enable(1)/disable(2) control used by the Reauthentication
Timer state machine.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.171.10.97.2.19.1.1.9 |
myDot1xAuthObjectsConfigTableA table that contains the configuration objects for the
Authenticator PAE associated with each MAC address.
An entry appears in this table for each MAC address that
may authenticate access to itself. SEQUENCE OF MyDot1xAuthConfigEntry .1.3.6.1.4.1.171.10.97.2.19.1.1.10 |
myDot1xAuthObjectsConfigEntryThe configuration information for an Authenticator
PAE. MyDot1xAuthConfigEntry .1.3.6.1.4.1.171.10.97.2.19.1.1.10.1 |
myDot1xAuthObjectsConfigFdbIdThe VID of vlan which the address blongs to.ro Unsigned32 .1.3.6.1.4.1.171.10.97.2.19.1.1.10.1.1 |
myDot1xAuthObjectsConfigAddrThe MAC address associated with this configurations.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.171.10.97.2.19.1.1.10.1.2 |
myDot1xAuthObjectsPaeStateThe current value of the Authenticator PAE state
machine.ro Enumeration .1.3.6.1.4.1.171.10.97.2.19.1.1.10.1.3 |
myDot1xAuthObjectsBackendAuthStateThe current state of the Backend Authentication
state machine.ro Enumeration .1.3.6.1.4.1.171.10.97.2.19.1.1.10.1.4 |
myDot1xAuthObjectsAuthControlledPortStatusThe current value of the controlled Port
status parameter for the Port.ro Enumeration .1.3.6.1.4.1.171.10.97.2.19.1.1.10.1.5 |
myDot1xAuthObjectsKeyTxEnabledThe value of the keyTransmissionEnabled constant
currently in use by the Authenticator PAE state
machine.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.97.2.19.1.1.10.1.6 |
myDot1xAuthObjectsIfIndexThe interface index associated with this configurationsro IfIndex (MY-TC) .1.3.6.1.4.1.171.10.97.2.19.1.1.10.1.7 |
myDot1xAuthObjectsStatsTableA table that contains the statistics objects for the
Authenticator PAE associated with each MAC address.
An entry appears in this table for each MAC address
that may authenticate access to itself. SEQUENCE OF MyDot1xAuthStatsEntry .1.3.6.1.4.1.171.10.97.2.19.1.1.11 |
myDot1xAuthStatsEntryThe statistics information for an Authenticator PAE. MyDot1xAuthStatsEntry .1.3.6.1.4.1.171.10.97.2.19.1.1.11.1 |
myDot1xAuthObjectsStatsFdbIdThe VID of vlan which the address blongs to.ro Unsigned32 .1.3.6.1.4.1.171.10.97.2.19.1.1.11.1.1 |
myDot1xAuthObjectsStatsAddrThe MAC address associated with this states.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.171.10.97.2.19.1.1.11.1.2 |
myDot1xAuthObjectsEapolFramesRxThe number of valid EAPOL frames of any type
that have been received by this Authenticator.ro Counter32 .1.3.6.1.4.1.171.10.97.2.19.1.1.11.1.3 |
myDot1xAuthObjectsEapolFramesTxThe number of EAPOL frames of any type
that have been transmitted by this Authenticator.ro Counter32 .1.3.6.1.4.1.171.10.97.2.19.1.1.11.1.4 |
myDot1xAuthObjectsEapolMyFramesRxThe number of EAPOL My frames that have
been received by this Authenticator.ro Counter32 .1.3.6.1.4.1.171.10.97.2.19.1.1.11.1.5 |
myDot1xAuthObjectsEapolLogoffFramesRxThe number of EAPOL Logoff frames that have
been received by this Authenticator.ro Counter32 .1.3.6.1.4.1.171.10.97.2.19.1.1.11.1.6 |
myDot1xAuthObjectsEapolRespIdFramesRxThe number of EAP Resp/Id frames that have
been received by this Authenticator.ro Counter32 .1.3.6.1.4.1.171.10.97.2.19.1.1.11.1.7 |
myDot1xAuthObjectsEapolRespFramesRxThe number of valid EAP Response frames
(other than Resp/Id frames) that have been
received by this Authenticator.ro Counter32 .1.3.6.1.4.1.171.10.97.2.19.1.1.11.1.8 |
myDot1xAuthObjectsEapolReqIdFramesTxThe number of EAP Req/Id frames that have been
transmitted by this Authenticator.ro Counter32 .1.3.6.1.4.1.171.10.97.2.19.1.1.11.1.9 |
myDot1xAuthObjectsEapolReqFramesTxThe number of EAP Request frames
(other than Rq/Id frames) that have been
transmitted by this Authenticator.ro Counter32 .1.3.6.1.4.1.171.10.97.2.19.1.1.11.1.10 |
myDot1xAuthObjectsInvalidEapolFramesRxThe number of EAPOL frames that have been
received by this Authenticator in which the
frame type is not recognized.ro Counter32 .1.3.6.1.4.1.171.10.97.2.19.1.1.11.1.11 |
myDot1xAuthObjectsEapLengthErrorFramesRxThe number of EAPOL frames that have been received
by this Authenticator in which the Packet Body
Length field is invalid.ro Counter32 .1.3.6.1.4.1.171.10.97.2.19.1.1.11.1.12 |
myDot1xAuthObjectsLastEapolFrameVersionThe protocol version number carried in the
most recently received EAPOL frame.ro Unsigned32 .1.3.6.1.4.1.171.10.97.2.19.1.1.11.1.13 |
myDot1xAuthObjectsLastEapolFrameSourceThe source MAC address carried in the
most recently received EAPOL frame.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.171.10.97.2.19.1.1.11.1.14 |
myDot1xCurrentUserNumberNumbers of users who attached to the system ,regardless of their state.ro Counter .1.3.6.1.4.1.171.10.97.2.19.1.1.12 |
myDot1xCurrentAuthenticatedUserNumberNumbers of user who attached to the system and their current state is
authorizedro Counter .1.3.6.1.4.1.171.10.97.2.19.1.1.13 |
myDot1xAccountStatusThe enable(1)/disable(2) control used by the
accounting function.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.171.10.97.2.19.1.1.14 |
myAuthIfTableThe table of the authenticated status of interface. SEQUENCE OF MyAuthIfEntry .1.3.6.1.4.1.171.10.97.2.19.1.1.15 |
myAuthIfEntryThe entry of MAC address which can be authenticated. MyAuthIfEntry .1.3.6.1.4.1.171.10.97.2.19.1.1.15.1 |
myAuthIfThe port number of the port/trunk to which frames received from a
specific port/trunk and destined for a specific MAC address.ro IfIndex (MY-TC) .1.3.6.1.4.1.171.10.97.2.19.1.1.15.1.1 |
myAuthIfStatusThe authentication status of a port, can be opened by setting its
value to Enabled(1), or closed by setting its value to Disabled(2).rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.171.10.97.2.19.1.1.15.1.2 |
myAuthenticationModeMode used for authenticationrw Enumeration .1.3.6.1.4.1.171.10.97.2.19.1.1.16 |
myDot1xAccountUpdateStatusAccount Update Statusrw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.171.10.97.2.19.1.1.17 |
myDot1xAcctInterimIntervalAccount Interim Intervalrw Unsigned32 .1.3.6.1.4.1.171.10.97.2.19.1.1.18 |
myDot1xEapolTagEnabledEapol Tag Enabledrw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.171.10.97.2.19.1.1.19 |
myDot1xIfUserMaxTableThe table of the max dot1x user number on authenticated interface. SEQUENCE OF MyDot1xIfUserMaxEntry .1.3.6.1.4.1.171.10.97.2.19.1.1.20 |
myDot1xIfUserMaxEntryThe entry of max dot1x user number on authenticated interface. MyDot1xIfUserMaxEntry .1.3.6.1.4.1.171.10.97.2.19.1.1.20.1 |
myDot1xIfUserMaxIndexThe interface index which dot1x authentication is enabled.ro IfIndex (MY-TC) .1.3.6.1.4.1.171.10.97.2.19.1.1.20.1.1 |
myDot1xIfUserMaxNumThe max dot1x user num on the interface, this is valid only
when dot1x authentication is enable on that interface.
Number 0 indicates no user number limits enabled on the interface.rw Unsigned32 .1.3.6.1.4.1.171.10.97.2.19.1.1.20.1.2 |
myAAAServerObjects OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.97.2.19.1.2 |
myAAAServerAuthPortUDP port used for authentication in the global
configuration.
For RADIUS only, default value is 1812.rw INTEGER .1.3.6.1.4.1.171.10.97.2.19.1.2.2 |
myAAAServerAcctPortUDP port used for accounting service in the global
configuration.
For RADIUS only, default value is 1813.rw INTEGER .1.3.6.1.4.1.171.10.97.2.19.1.2.3 |
myAAAServerRadiusKeyStrThe server key to be used with all RADIUS server.
Retrieving the value of this object via SNMP will
return an empty string for security reasons.rw DisplayString .1.3.6.1.4.1.171.10.97.2.19.1.2.4 |
myAAAServerTacplusKeyStrThe server key to be used with all TACACS+ server.
Retrieving the value of this object via SNMP will return
an empty string for security reasons.rw DisplayString .1.3.6.1.4.1.171.10.97.2.19.1.2.8 |
myAAAServerConfigTableThis table shows current configurations for each
AAA server, allows existing servers to be removed
and new ones to be created. SEQUENCE OF MyAAAServerConfigEntry .1.3.6.1.4.1.171.10.97.2.19.1.2.9 |
myAAAServerConfigEntryThe table of AAA server configuration identified by its
protocol and its index. MyAAAServerConfigEntry .1.3.6.1.4.1.171.10.97.2.19.1.2.9.1 |
myAAAServerConfigProtocolThe variable denotes the protocol used by the managed
device with the AAA server corresponding to this entry
in the table. Enumeration .1.3.6.1.4.1.171.10.97.2.19.1.2.9.1.1 |
myAAAServerConfigIndexA number uniquely identifying each server.
If the myAAAServerConfigIndex value for row creation is
already in use by an existing entry, snmp set to the
myAAAServerConfigIndex value will fail.
Upon reload, casIndex values may be changed. Unsigned32 .1.3.6.1.4.1.171.10.97.2.19.1.2.9.1.2 |
myAAAServerConfigAddressTypeThe type of address format used for the
myAAAServerConfigAddress object.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.97.2.19.1.2.9.1.3 |
myAAAServerConfigAddressThe IP address of the server.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.97.2.19.1.2.9.1.4 |
myAAAServerConfigAuthPortUDP/TCP port used for authentication in the server.
For RADIUS, default value is 1812.
For TACACS+, default value is 49.rw INTEGER .1.3.6.1.4.1.171.10.97.2.19.1.2.9.1.5 |
myAAAServerConfigAcctPortUDP/TCP port used for accounting service in the server.
For RADIUS, default value is 1813.
For TACACS+, the value of myAAAServerConfigAcctPort is
ignored, myAAAServerConfigAuthPort will be used instead.rw INTEGER .1.3.6.1.4.1.171.10.97.2.19.1.2.9.1.6 |
myAAAServerConfigKeyStrThe server key to be used with this server.
Retrieving the value of this object via SNMP will return an
empty string for security reasons.rw DisplayString .1.3.6.1.4.1.171.10.97.2.19.1.2.9.1.7 |
myAAAServerConfigRowStatusThe status of this table entry. Once the entry status is
set to active, the associated entry cannot be modified except
destroyed by setting this object to destroy(6).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.97.2.19.1.2.9.1.8 |
myAuthUserObjects OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.97.2.19.1.3 |
myAuthAddrTableThe table of MAC address which can be authenticated. SEQUENCE OF MyAuthAddrEntry .1.3.6.1.4.1.171.10.97.2.19.1.3.1 |
myAuthAddrEntryThe entry of MAC address which can be authenticated. MyAuthAddrEntry .1.3.6.1.4.1.171.10.97.2.19.1.3.1.1 |
myAuthPortThe port number of the port/trunk to which frames received from a
specific port/trunk and destined for a specific MAC address.ro IfIndex (MY-TC) .1.3.6.1.4.1.171.10.97.2.19.1.3.1.1.1 |
myAuthMacAddressThe MAC address which can be authenticated.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.171.10.97.2.19.1.3.1.1.2 |
myAuthAddrStatusvalid(1) - this entry is currently in use .
invalid(2) - writing this value to the object
removes the corresponding entry.rw Enumeration .1.3.6.1.4.1.171.10.97.2.19.1.3.1.1.3 |
myAuthUserTableThe table of authentication User Info. SEQUENCE OF MyAuthUserEntry .1.3.6.1.4.1.171.10.97.2.19.1.3.2 |
myAuthUserEntryThe entry of authentication User Info table. MyAuthUserEntry .1.3.6.1.4.1.171.10.97.2.19.1.3.2.1 |
myAuthUserFdbIdThe VID of vlan which the address blongs to.ro Unsigned32 .1.3.6.1.4.1.171.10.97.2.19.1.3.2.1.1 |
myAuthUserMacAddressThe MAC Address of authentication User .ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.171.10.97.2.19.1.3.2.1.2 |
myAuthUserNameThe Name of authentication User.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.171.10.97.2.19.1.3.2.1.3 |
myAuthUserSessionIdThe Session Id of authentication User .ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.171.10.97.2.19.1.3.2.1.4 |
myAuthUserIpAddrThe IP Address of authentication User .ro IpAddress .1.3.6.1.4.1.171.10.97.2.19.1.3.2.1.5 |
myAuthUserPortThe interface of authentication User .ro INTEGER .1.3.6.1.4.1.171.10.97.2.19.1.3.2.1.6 |
myAuthUserStatusSetting this object to 'invalid' will close a authenticated user,
set its value to valid will cause no action of agent,
when query always return value valid.rw ConfigStatus (MY-TC) .1.3.6.1.4.1.171.10.97.2.19.1.3.2.1.7 |
myAuthUserForVPNDelVPN user's name. Setting this object will delete a authenticated user and this user is unauthenticated.
The set string is the username.
Reading this object always return null string.rw DisplayString .1.3.6.1.4.1.171.10.97.2.19.1.3.3 |
myAuthModeObjects OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.97.2.19.1.4 |
myIpAuthorizationModedisable(1) - don't limit ip address of user
dhcpServer(2) - limit ip address of user, only ip address assigned by the dhcp
server is legit.
radiusServer(3) - limit ip address of user, only ip address assigned by the radius
server is legit.
supplicant(4) - mac+ip+port indicates different users (get the IP adress through supplicant)rw Enumeration .1.3.6.1.4.1.171.10.97.2.19.1.4.1 |
myClientProbeObjects OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.97.2.19.1.5 |
myClientProbeEnabledStatusThe status of client probe function.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.171.10.97.2.19.1.5.1 |
myClientProbeHelloIntervalThe interval that client send hello packets.rw Unsigned32 .1.3.6.1.4.1.171.10.97.2.19.1.5.2 |
myClientProbeAliveIntevalWhen switch does not receive any legal hello packets from client
in this interval,it will send RADIUS-Account-Stop to RADIUS server
to stop this connection.The value of the objects must be more than
myClientProbeHelloIntervalrw Unsigned32 .1.3.6.1.4.1.171.10.97.2.19.1.5.3 |
myAAAMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.97.2.19.2 |
myAAAMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.97.2.19.2.1 |
myAAAMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.97.2.19.2.2 |