MSSSERVER8260-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
19
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
19 total| Object Name |
|---|
ibm OBJECT IDENTIFIER .1.3.6.1.4.1.2 |
IMPORTS Unknown .1.3.6.1.4.1.2 |
ibmProd OBJECT IDENTIFIER .1.3.6.1.4.1.2.6 |
nwaysMSS OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.118 |
mssServer8260 OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.118.3 |
mssServer8260ELSTrapV2The trap announces an Event Logging System (ELS) event
occurred. The variable proElsSubSysEventMsg provides a textual
description of the event. The variable is in one of two
formats. If ELS timestamping is enabled, the format is
hr:min:sec subsys_name.event_num: message_text. An example
would be 09:32:56 IP.008: no rte 9.7.1.8 -> 9.7.4.3 dsc.
If ELS timestamping is disabled, the format is
subsys_name.event_num: message_text. An example would be
IP.008: no rte 9.7.1.8 -> 9.7.4.3 dsc. TRAP-TYPE .1.3.6.1.4.1.2.6.118.3.0.2 |
mss8260PCAdapTypeChgThe trap announces a change in the type of PC card. It shall be
sent if the value of the mss8260PCAdapType changes and
mss8260NotifyStatus has a value of enabled(1). TRAP-TYPE .1.3.6.1.4.1.2.6.118.3.0.3 |
mss8260TempThresholdChgThe trap announces a change in the temperature of the blade.
It shall be sent if the value of the mss8260TempThreshold changes
and mss8260NotifyStatus has a value of enabled(1). TRAP-TYPE .1.3.6.1.4.1.2.6.118.3.0.4 |
mss8260Prod OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.118.3.1 |
mss8260ResetFlagThe flag that controls the reset process in this blade.
This variable shall assume a value of noreset(1) in
the absence of a request for a reset from the management
application. This variable shall assume a value of reboot(2) if the
management application requests that this blade execute
a complete hardware reboot which reloads the code load from
storage.rw Enumeration .1.3.6.1.4.1.2.6.118.3.1.1 |
mss8260DRAMinstalledThe total amount of dynamic RAM installed on this blade.
The amount is in units of megabytes.ro INTEGER .1.3.6.1.4.1.2.6.118.3.1.2 |
mss8260NotifyStatusThe status of the trap reporting service in this blade. This
variable shall assume a value of enabled(1) if this blade is
permitted to send traps. This variable shall assume a value of
disabled(2) if this blade is prohibited from sending traps.rw Enumeration .1.3.6.1.4.1.2.6.118.3.1.3 |
mss8260TempThresholdStatusThe status of the temperature in this blade. This variable
shall assume a value of normal(1) if the temperature is within
proper operating range for this blade. This variable shall
assume a value of warning(2) if the temperature becomes elevated
but this blade can still operate. This variable shall assume
a value of shutdown(3) if the temperature is beyond the operating
limits of this blade.ro Enumeration .1.3.6.1.4.1.2.6.118.3.1.4 |
mss8260PCAdapter OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.118.3.2 |
mss8260PCAdapNumSlotThe number of PC adapter slots available for this blade.ro INTEGER .1.3.6.1.4.1.2.6.118.3.2.1 |
mss8260PCAdapTableA table of PC adapters entries. The number of entries is
given by the value of mss8260PCAdapNumSlot. SEQUENCE OF Mss8260PCAdapEntry .1.3.6.1.4.1.2.6.118.3.2.2 |
mss8260PCAdapEntryA PC adapter entry containing objects to describe the
operational aspects of the PC adapter on this blade. Mss8260PCAdapEntry .1.3.6.1.4.1.2.6.118.3.2.2.1 |
mss8260PCAdapSlotNumThe relative slot location at which the adapter is attached to
this blade. Slots are numbered from 1 to 2 (bottom to top)
when facing this blade. This variable serves as the index
for the mss8260PCAdapTable.ro INTEGER .1.3.6.1.4.1.2.6.118.3.2.2.1.1 |
mss8260PCAdapTypeThe type of PC adapter that is inserted into this slot.
The variable shall assume a value of unknown(1) if the adapter
in the slot is not supported by this blade. The variable
shall assume a value of harddrive(2) if the slot contains a PC disk
drive. The variable shall assume a value of modem(3) if the
slot contains a PC data/fax/voice modem. The variable shall
assume a value of flashcard(5) if the slot contains a PC flash card.
This variable shall assume a value of notPresent(4), when a
PC card is not plugged into the corrisponding slot.ro Enumeration .1.3.6.1.4.1.2.6.118.3.2.2.1.2 |