MSSSERVER8210-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
31
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
31 total| Object Name |
|---|
ibm OBJECT IDENTIFIER .1.3.6.1.4.1.2 |
IMPORTS Unknown .1.3.6.1.4.1.2 |
ibmProd OBJECT IDENTIFIER .1.3.6.1.4.1.2.6 |
nwaysMSS OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.118 |
mssServer8210 OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.118.2 |
mssServer8210ELSTrapV2The trap announces that an Event Logging System (ELS) event
occurred. The variable proElsSubSysEventMsg provides a textual
description of the event. The variable is in one of two
formats. If ELS timestamping is enabled, the format is
hr:min:sec subsys_name.event_num: message_text. An example
would be 09:32:56 IP.008: no rte 9.7.1.8 -> 9.7.4.3 dsc.
If ELS timestamping is disabled, the format is
subsys_name.event_num: message_text. An example would be
IP.008: no rte 9.7.1.8 -> 9.7.4.3 dsc. TRAP-TYPE .1.3.6.1.4.1.2.6.118.2.0.2 |
mss8210PCAdapTypeChgThe trap announces a change in the type of PC card. It shall be
sent if the value of the mss8210PCAdapType changes and
mss8210NotifyStatus has a value of enabled(1). TRAP-TYPE .1.3.6.1.4.1.2.6.118.2.0.3 |
mss8210TempThresholdChgThe trap announces a change in the temperature of the stand-alone.
It shall be sent if the value of the mss8210TempThreshold changes
and mss8210NotifyStatus has a value of enabled(1). TRAP-TYPE .1.3.6.1.4.1.2.6.118.2.0.4 |
mss8210PCIAdapStatusChgThe trap announces a change in the status of the PCI adapter.
It shall be sent if the value of either mss8210PCIAdapConfigType,
mss8210PCIAdapOperStatus, mss8210PCIAdapDiagStatus,
mss8210PCIAdapNetworkStatus or mss8210PCIAdapFaultStatus changes
and mss8210NotifyStatus has a value of enabled(1). TRAP-TYPE .1.3.6.1.4.1.2.6.118.2.0.5 |
mss8210Prod OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.118.2.1 |
mss8210ResetFlagThe flag that controls the reset process in this stand-alone.
This variable shall assume a value of noreset(1) in
the absence of a request for a reset from the management
application. This variable shall assume a value of reboot(2) if
the management application requests that this stand-alone execute
a complete hardware reboot which reloads the code load from
storage.rw Enumeration .1.3.6.1.4.1.2.6.118.2.1.1 |
mss8210DRAMinstalledThe total amount of dynamic RAM installed on this stand-alone.
The amount is in units of megabytes.ro INTEGER .1.3.6.1.4.1.2.6.118.2.1.2 |
mss8210NotifyStatusThe status of the trap reporting service in this stand-alone. This
variable shall assume a value of enabled(1) if this stand-alone is
permitted to send traps. This variable shall assume a value of
disabled(2) if this stand-alone is prohibited from sending traps.rw Enumeration .1.3.6.1.4.1.2.6.118.2.1.3 |
mss8210TempThresholdStatusThe status of the temperature in this stand-alone. This variable
shall assume a value of normal(1) if the temperature is within
proper operating range for this stand-alone. This variable shall
assume a value of warning(2) if the temperature becomes elevated
but this stand-alone can still operate. This variable shall assume
a value of shutdown(3) if the temperature is beyond the operating
limits of this stand-alone.ro Enumeration .1.3.6.1.4.1.2.6.118.2.1.4 |
mss8210PCAdapter OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.118.2.2 |
mss8210PCAdapNumSlotThe number of PC adapter slots available for this stand-alone.ro INTEGER .1.3.6.1.4.1.2.6.118.2.2.1 |
mss8210PCAdapTableA table of PC adapters entries. The number of entries is
given by the value of mss8210PCAdapNumSlot. SEQUENCE OF Mss8210PCAdapEntry .1.3.6.1.4.1.2.6.118.2.2.2 |
mss8210PCAdapEntryA PC adapter entry containing objects to describe the
operational aspects of the PC adapter on this stand-alone. Mss8210PCAdapEntry .1.3.6.1.4.1.2.6.118.2.2.2.1 |
mss8210PCAdapSlotNumThe relative slot location at which the adapter is attached to
this stand-alone. The slots are numbered from 1 to 2 (left to right)
when facing this stand-alone. This variable serves as the index
for the mss8210PCAdapTable.ro INTEGER .1.3.6.1.4.1.2.6.118.2.2.2.1.1 |
mss8210PCAdapTypeThe type of PC adapter that is inserted into this slot.
The variable shall assume a value of unknown(1) if the adapter
in the slot is not supported by this stand-alone. The variable
shall assume a value of harddrive(2) if the slot contains a PC disk
drive. The variable shall assume a value of modem(3) if the
slot contains a PC data/fax/voice modem. The variable shall
assume a value of flashcard(5) if the slot contains a PC flash card.
This variable shall assume a value of notPresent(4), when a
PC card is not plugged into the corrisponding slot.ro Enumeration .1.3.6.1.4.1.2.6.118.2.2.2.1.2 |
mss8210PCIAdapter OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.118.2.3 |
mss8210PCIAdapNumSlotThe number of PCI adapter slots available for this stand-alone.ro INTEGER .1.3.6.1.4.1.2.6.118.2.3.1 |
mss8210PCIAdapTableA table of PCI adapters entries. The number of entries is
given by the value of mss8210PCIAdapNumSlot. SEQUENCE OF Mss8210PCIAdapEntry .1.3.6.1.4.1.2.6.118.2.3.2 |
mss8210PCIAdapEntryA PCI adapter entry containing objects to describe the
operational aspects of the PCI adapter on this stand-alone. Mss8210PCIAdapEntry .1.3.6.1.4.1.2.6.118.2.3.2.1 |
mss8210PCIAdapSlotNumThe relative slot location at which the adapter is attached to
this stand-alone. Slots are numbered from 1 to 2 (top to
bottom) when facing this stand-alone. This variable serves as the
index for the mss8210PCIAdapTable.ro INTEGER .1.3.6.1.4.1.2.6.118.2.3.2.1.1 |
mss8210PCIAdapTypeThe type of PCI adapter that is inserted into this slot.
This variable shall assume a value of unknown(1) if the
mss8210PCIAdapConfigType is not-configured(1) or if the
mss8210PCIAdapConfigType is atm(2) and the mss8210PCIAdapOperStatus
has a value of unknown(1), not-configured(2), not-present(3),
unavailable(4), does-not_apply(5) or miss-configured(10).
The variable shall assume a value of atm(2) if the
mss8210PCIAdapConfigType has a value of atm(2) and the
mss8210PCIAdapOperStatus has a value of enabled-pending(6),
enabled(7), disabled-pending(8) or disabled(9).
The variable shall assume a value of fddi(3) if the
mss8210PCIAdapConfigType has a value of fddi(3) and the
mss8210PCIAdapOperStatus has a value of enabled-pending(6),
enabled(7), disabled-pending(8) or disabled(9).
This variable shall assue a value of notPresent(4), when a
PCI card is not plugged into the corrisponding slot.ro Enumeration .1.3.6.1.4.1.2.6.118.2.3.2.1.2 |
mss8210PCIAdapConfigTypeThe router configuration type for this slot. The configuration
type originates from the configuration tool used for this
stand-alone. The variable shall assume a value of
not-configured(1) if no configuration exist for this slot. The
variable shall assume a value of atm(2) if the slot is
configured for an ATM adapter. The variable shall assume a value
of fddi(3) if the slot is configured for an FDDI adapter.ro Enumeration .1.3.6.1.4.1.2.6.118.2.3.2.1.3 |
mss8210PCIAdapOperStatusThe operational status of this PCI adapter on this stand-alone.
The variable shall assume a value of unknown(1) if the adapter
inserted in the slot can not be recognized. The variable shall
assume a value of not-configured(2) if the adapter inserted in
the slot is recognized but no router configuration exists. The
variable shall assume a value of not-present(3) if the adapter
is not inserted in the slot but the router configuration exists.
The variable shall assume a value of unavailable(4) if adapter
inserted in the slot can not be used nor made ready to be used;
for example, a hardware error. The variable shall assume a value
of does-not-apply(5) if this adapter does not contain an
operational state. The variable shall assume a value of
enable-pending(6) if commands have been issued to enable the
adapter but have not been completed. The variable shall assume
a value of enabled(7) if commands have been successfully issued
to enable the adapter. The variable shall assume a value of
disable-pending(8) if commands have been issued to disable the
adapter but have not been completed. The variable shall assume
a value of disabled(9) if commands have been successfully issued
to disable the adapter. The variable shall assume a value of
miss-configured(10) if the adapter is inserted in the slot
but the router configuration is of a different type.ro Enumeration .1.3.6.1.4.1.2.6.118.2.3.2.1.4 |
mss8210PCIAdapDiagStatusThe diagnostic status of this PCI adapter on this stand-alone.
The variable shall assume a value of auto(1) if commands have
been issued by the system to determine the status of the
adapter; for example, at initialization. The variable shall
assume a value of inactive(2) if the adapter is not currently
running any diagnostics. The variable shall assume a value
of idle(3) if the adapter is in the disabled operational state
ready to run the diagnostics. The variable shall assume a value
of active(4) if commands have been issued by the user to
run the diagnostics.ro Enumeration .1.3.6.1.4.1.2.6.118.2.3.2.1.5 |
mss8210PCIAdapNetworkStatusThe network status of this PCI adapter on this stand-alone.
The variable shall assume a value of up(1) if the adapter
is connected to the network. The variable shall assume a value
of down(3) if the adapter can not verify a network connection.
The variable shall assume a value of testing(4) if the
adapter is running tests for the network connection. The
variable shall assume a value of unknown(1) if network status
can not be determined. The variable shall assume a value of
does-not-apply(5) if the adapter does not contain a network
state.ro Enumeration .1.3.6.1.4.1.2.6.118.2.3.2.1.6 |
mss8210PCIAdapFaultStatusThe fault status of this PCI adapter on this stand-alone.
The variable shall assume a value of no-fault(2)
if no fault that is associated with this adapter has been
detected. The variable shall assume a value of isolated(3) if this
fault that can be isolated on the adapter itself. The variable
shall assume a value of non-isolated(4) if the fault
can not isolated on the adapter or in the network.
The variable shall assume a value of unknown(1) if the
fault status has not been determined; for example, at
initialization.ro Enumeration .1.3.6.1.4.1.2.6.118.2.3.2.1.7 |