MRV-IN-REACH-CHASSIS-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for MRV-IN-REACH-CHASSIS-MIB.
159
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
159 total| Object Name |
|---|
xChassis OBJECT IDENTIFIER .1.3.6.1.4.1.33.16 |
BRIDGE-MIB Unknown .1.3.6.1.4.1.33.16 |
xChassisBasic OBJECT IDENTIFIER .1.3.6.1.4.1.33.16.1 |
basicBase802AddressBase IEEE 802 global address for the chassis.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.33.16.1.1 |
basicSlotChassis slot number (slotIndex) of the system whose
agent is supplying this MIB.ro INTEGER .1.3.6.1.4.1.33.16.1.2 |
basicSlotNumberNumber of slots in the chassis.ro INTEGER .1.3.6.1.4.1.33.16.1.3 |
basicNewBase802AddressNew base IEEE 802 global address for the chassis.
Must be set in conjunction with featType
'changeEthernetAddress' and featKey from the MRV In-Reach
System MIB.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.33.16.1.4 |
xSegment OBJECT IDENTIFIER .1.3.6.1.4.1.33.16.2 |
segmentTableA list of segment entries, one for each segment of
each type on the chassis. SEQUENCE OF SegmentEntry .1.3.6.1.4.1.33.16.2.1 |
segmentEntryValues for a chassis segment. SegmentEntry .1.3.6.1.4.1.33.16.2.1.1 |
segmentTypeThe segment type.ro NetworkType .1.3.6.1.4.1.33.16.2.1.1.1 |
segmentIndexAn index value that uniquely identifies a
segment.ro Letter .1.3.6.1.4.1.33.16.2.1.1.2 |
xPort OBJECT IDENTIFIER .1.3.6.1.4.1.33.16.3 |
portIOCardTypeThe hardware type of the I/O card in this slot.ro IOType .1.3.6.1.4.1.33.16.3.1 |
portIOCardSerialNumberThe MRV In-Reach serial number of the I/O card in this
slot.ro SerialNumber .1.3.6.1.4.1.33.16.3.2 |
portIOCardOperStatusStatus of the I/O card relative to the function
card in this slot.ro Enumeration .1.3.6.1.4.1.33.16.3.3 |
portTableA list of port entries, one for each port of each
type on the slots I/O card. SEQUENCE OF PortEntry .1.3.6.1.4.1.33.16.3.4 |
portEntryValues for an I/O card port. PortEntry .1.3.6.1.4.1.33.16.3.4.1 |
portTypeThe port type.ro NetworkType .1.3.6.1.4.1.33.16.3.4.1.1 |
portIndexAn index value that uniquely identifies a port.ro INTEGER .1.3.6.1.4.1.33.16.3.4.1.2 |
xController OBJECT IDENTIFIER .1.3.6.1.4.1.33.16.4 |
controllerTableA list of controller entries, one for each
controller of each type on the local system. SEQUENCE OF ControllerEntry .1.3.6.1.4.1.33.16.4.1 |
controllerEntryValues for a controller. ControllerEntry .1.3.6.1.4.1.33.16.4.1.1 |
controllerTypeThe controller type.ro NetworkType .1.3.6.1.4.1.33.16.4.1.1.1 |
controllerIndexAn index value that uniquely identifies a
controller.ro INTEGER .1.3.6.1.4.1.33.16.4.1.1.2 |
controllerNetworkThe instance identifier of the first object in the
conceptual row entry for the segment, port, or
controller this controller is to use, that is,
segmentType, portType or controllerType.rw OBJECT IDENTIFIER .1.3.6.1.4.1.33.16.4.1.1.3 |
xInterface OBJECT IDENTIFIER .1.3.6.1.4.1.33.16.5 |
interfaceTableA list of interface entries, corresponding to the
MIB II Interface group. These are directly
equivalent to hardware network controllers, and must
be the lowest numbered interfaces on the system. SEQUENCE OF InterfaceEntry .1.3.6.1.4.1.33.16.5.1 |
interfaceEntryValues for an interface. InterfaceEntry .1.3.6.1.4.1.33.16.5.1.1 |
interfaceIndexAn index value that uniquely identifies an
interface. The interface identified by a particular
value of this index is the same interface as
identified by the same value of ifIndex.ro INTEGER .1.3.6.1.4.1.33.16.5.1.1.1 |
interfaceNetworkThe instance identifier of the first object in the
conceptual row entry for the segment, port, or
controller this interface is to use, that is,
segmentType, portType, or controllerType.rw OBJECT IDENTIFIER .1.3.6.1.4.1.33.16.5.1.1.2 |
xSlotBootControl OBJECT IDENTIFIER .1.3.6.1.4.1.33.16.6 |
slotBootControlTableA list of slot boot control entries. SEQUENCE OF SlotBootControlEntry .1.3.6.1.4.1.33.16.6.1 |
slotBootControlEntryValues for a chassis slot. SlotBootControlEntry .1.3.6.1.4.1.33.16.6.1.1 |
slotBootControlSlotAn index value that uniquely identifies a slot,
defined the same as slotIndex.ro INTEGER .1.3.6.1.4.1.33.16.6.1.1.1 |
slotBootControlIndexAn index value that uniquely identifies a boot
control entry, from 1 to the number of entries for
the slot.ro INTEGER .1.3.6.1.4.1.33.16.6.1.1.2 |
slotBootControlStatusThe status of the entry. Set to 'disabled' to
disable the entry.rw Enumeration .1.3.6.1.4.1.33.16.6.1.1.3 |
slotBootControlControllerThe instance identifier of the first object in the
conceptual row entry for the controller this entry
selects for bootstrap operation, that is,
controllerType. This entry must be compatible with
slotBootControlNetwork, including being of the same
network type. The value 0.0 indicates default
action.rw OBJECT IDENTIFIER .1.3.6.1.4.1.33.16.6.1.1.4 |
slotBootControlNetworkThe instance identifier of the first object in the
conceptual row entry for the segment or port this entry selects for bootstrap operation, that is,
segmentType or portType. This entry must be
compatible with slotBootControlController, including
being of the same network type. The value 0.0
indicates default action.rw OBJECT IDENTIFIER .1.3.6.1.4.1.33.16.6.1.1.5 |
slotBootControlMopFileThe software file name to request for down-line
load of the server via MOP or XMOP.rw DisplayString .1.3.6.1.4.1.33.16.6.1.1.6 |
slotBootControlInternetFileThe filename to request when loading an image via
TFTP.rw DisplayString .1.3.6.1.4.1.33.16.6.1.1.7 |
slotBootControlInternetAddressThe internet address of the system is to use for
itself when loading via TFTP. The value 0.0.0.0
indicates default action.rw IpAddress .1.3.6.1.4.1.33.16.6.1.1.8 |
slotBootControlInternetServerThe internet address of the server to use when
loading an image via TFTP. The value 0.0.0.0
indicates default action.rw IpAddress .1.3.6.1.4.1.33.16.6.1.1.9 |
slotBootControlInternetGatewayThe internet address of the gateway to use when
loading an image via TFTP. The value 0.0.0.0
indicates default action.rw IpAddress .1.3.6.1.4.1.33.16.6.1.1.10 |
slotBootControlInternetDelimiterThe character separating the load file directory name
from the file name.rw DisplayString .1.3.6.1.4.1.33.16.6.1.1.11 |
slotBootControlFlagTableA list of slot boot control source flag entries. SEQUENCE OF SlotBootControlFlagEntry .1.3.6.1.4.1.33.16.6.2 |
slotBootControlFlagEntryValues for a boot control flag. SlotBootControlFlagEntry .1.3.6.1.4.1.33.16.6.2.1 |
slotBootControlFlagLoadBootpTftpControl for performing load over BOOTP/TFTP.rw Enumeration .1.3.6.1.4.1.33.16.6.2.1.1 |
slotBootControlFlagParamBootpTftpControl for performing parameter load over
BOOTP/TFTP.rw Enumeration .1.3.6.1.4.1.33.16.6.2.1.2 |
slotBootControlFlagDumpBootpTftpControl for performing dump over BOOTP/TFTP.rw Enumeration .1.3.6.1.4.1.33.16.6.2.1.3 |
slotBootControlFlagLoadTftpDirectControl for performing load over direct TFTP.rw Enumeration .1.3.6.1.4.1.33.16.6.2.1.4 |
slotBootControlFlagParamTftpDirectControl for performing parameter load over direct
TFTP.rw Enumeration .1.3.6.1.4.1.33.16.6.2.1.5 |
slotBootControlFlagDumpTftpDirectControl for performing dump over direct TFTP.rw Enumeration .1.3.6.1.4.1.33.16.6.2.1.6 |
slotBootControlFlagLoadLocalControl for performing load from a local device.rw Enumeration .1.3.6.1.4.1.33.16.6.2.1.7 |
slotBootControlFlagParamLocalControl for performing parameter load from a local
device.rw Enumeration .1.3.6.1.4.1.33.16.6.2.1.8 |
slotBootControlFlagDumpLocalControl for performing dump from a local device.rw Enumeration .1.3.6.1.4.1.33.16.6.2.1.9 |
slotBootControlFlagLoadMopControl for performing load over Digital's MOP.rw Enumeration .1.3.6.1.4.1.33.16.6.2.1.10 |
slotBootControlFlagParamMopControl for performing parameter load over
Digital's MOP.rw Enumeration .1.3.6.1.4.1.33.16.6.2.1.11 |
slotBootControlFlagDumpMopControl for performing dump over Digital's MOP.rw Enumeration .1.3.6.1.4.1.33.16.6.2.1.12 |
slotBootControlFlagLoadXmopControl for performing load over MRV In-Reach extended
MOP.rw Enumeration .1.3.6.1.4.1.33.16.6.2.1.13 |
slotBootControlFlagParamXmopControl for performing parameter load over MRV In-Reach
extended MOP.rw Enumeration .1.3.6.1.4.1.33.16.6.2.1.14 |
slotBootControlFlagDumpXmopControl for performing dump over MRV In-Reach extended
MOP.rw Enumeration .1.3.6.1.4.1.33.16.6.2.1.15 |
slotBootControlFlagLoadRarpTftpControl for performing load over RARP/TFTP.rw Enumeration .1.3.6.1.4.1.33.16.6.2.1.16 |
slotBootControlFlagParamRarpTftpControl for performing parameter load over
RARP/TFTP.rw Enumeration .1.3.6.1.4.1.33.16.6.2.1.17 |
slotBootControlFlagDumpRarpTftpControl for performing dump over RARP/TFTP.rw Enumeration .1.3.6.1.4.1.33.16.6.2.1.18 |
slotBootControlStorageTableA list of slot boot control Storage entries. SEQUENCE OF SlotBootControlStorageEntry .1.3.6.1.4.1.33.16.6.3 |
slotBootControlStorageEntryValues for a chassis slot. SlotBootControlStorageEntry .1.3.6.1.4.1.33.16.6.3.1 |
slotBootControlStorageClientSlotAn index value that uniquely identifies a slot,
defined the same as slotIndex.ro INTEGER .1.3.6.1.4.1.33.16.6.3.1.1 |
slotBootControlStorageServerSlotAn index value that uniquely identifies the slot in
which the Storage record resides, with the same values
as slotIndex.ro INTEGER .1.3.6.1.4.1.33.16.6.3.1.2 |
slotBootControlStorageStatusThe status of the entry.ro Enumeration .1.3.6.1.4.1.33.16.6.3.1.3 |
slotBootControlStorageFailuresThe number of times a read from or write to a given
Storage location failedro Counter .1.3.6.1.4.1.33.16.6.3.1.4 |
xSlot OBJECT IDENTIFIER .1.3.6.1.4.1.33.16.7 |
slotTableA list of slot entries. SEQUENCE OF SlotEntry .1.3.6.1.4.1.33.16.7.1 |
slotEntryValues for a chassis slot. SlotEntry .1.3.6.1.4.1.33.16.7.1.1 |
slotIndexAn index value that uniquely identifies a slot, in
the range 0 to basicSlotNumber, where the value 0
indicates the same slot as basicSlot. As the
objects found at instance zero are duplicates, that
instance does not appear in responses a get-next,
that is, the lowest numbered slotIndex returned by
get-next is 1.ro INTEGER .1.3.6.1.4.1.33.16.7.1.1.1 |
slotAdminActionControl to cause reset of the system in a slot.
When read, the value is always 'ready'. Setting to
'reset' or 'resetHold' causes a single attempt to
take that action, but does not ensure transition to
any particular value of slotOperStatus.rw Enumeration .1.3.6.1.4.1.33.16.7.1.1.2 |
slotOperStatusRelative to the chassis, the current operating
status of the system in the slot.ro Enumeration .1.3.6.1.4.1.33.16.7.1.1.3 |
slotSecondsSinceResetThe number of seconds since the system in the slot
was last reset by hardware or software.ro Gauge .1.3.6.1.4.1.33.16.7.1.1.4 |
slotHardwareTypeThe type of hardware in the slot.ro HardwareType .1.3.6.1.4.1.33.16.7.1.1.5 |
slotHardwareSerialNumberThe MRV In-Reach serial number of the function card
hardware in this slot.ro SerialNumber .1.3.6.1.4.1.33.16.7.1.1.6 |
slotHardwareRevisionThis revision level of the function card hardware
in the slot.ro INTEGER .1.3.6.1.4.1.33.16.7.1.1.7 |
slotIOCardTypeThe hardware type of the I/O card in this slot.ro IOType .1.3.6.1.4.1.33.16.7.1.1.8 |
slotIOCardSerialNumberThe MRV In-Reach serial number of the I/O card in this
slot.ro SerialNumber .1.3.6.1.4.1.33.16.7.1.1.9 |
slotIOCardOperStatusStatus of the I/O card relative to the function
card in this slot.ro Enumeration .1.3.6.1.4.1.33.16.7.1.1.10 |
slotBootstrapFirmwareRevisionThe firmware revision level of the bootstrap ROM
installed in the system in the slot.ro INTEGER .1.3.6.1.4.1.33.16.7.1.1.11 |
slotElementalFirmwareRevisionThe firmware revision level of the minimal function
ROM (management bus microprocessor) installed in the
system in the slot.ro INTEGER .1.3.6.1.4.1.33.16.7.1.1.12 |
slotMemorySizeThe number of bytes of memory installed in the
system in the slot.ro INTEGER .1.3.6.1.4.1.33.16.7.1.1.13 |
slotLedNumberThe number of LEDs on the system in the slot. A
value of 0 indicates none, unknown, or status not
readable.ro Gauge .1.3.6.1.4.1.33.16.7.1.1.14 |
slotLedStatusThe status of the LEDs displayed on the front and
back of the system in the slot. The first bit is
the high-order bit of the first byte of the value,
proceeding to the low-order bit, then to then next
byte. On the system hardware, the first LED is at
the top, left, front, proceeding left to right, top
to bottom, and front to back.ro OCTET STRING .1.3.6.1.4.1.33.16.7.1.1.15 |
slotBase802AddressBase IEEE 802 global address for the slot.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.33.16.7.1.1.16 |
slotIpAddressAn internet address to which the system in this
slot might respond. May be one of many.ro IpAddress .1.3.6.1.4.1.33.16.7.1.1.17 |
slotPlus5StatusStatus of the +5 volt power to the slot.ro Enumeration .1.3.6.1.4.1.33.16.7.1.1.18 |
slotPlus12StatusStatus of the +12 volt power to the slot.ro Enumeration .1.3.6.1.4.1.33.16.7.1.1.19 |
slotMinus12StatusStatus of the -12 volt power to the slot.ro Enumeration .1.3.6.1.4.1.33.16.7.1.1.20 |
slotPlus5WattsTenths of watts of +5 volt power currently drawn by
the slot.ro Gauge .1.3.6.1.4.1.33.16.7.1.1.21 |
slotPlus12WattsTenths of watts of +12 volt power currently drawn
by the slot.ro Gauge .1.3.6.1.4.1.33.16.7.1.1.22 |
slotMinus12WattsTenths of watts of -12 volt power currently drawn
by the slot.ro Gauge .1.3.6.1.4.1.33.16.7.1.1.23 |
slotIOCardHardwareVersionVersion number of I/O card in the slot.ro INTEGER .1.3.6.1.4.1.33.16.7.1.1.24 |
slotRestoreNVSSetting to 'execute' causes the non-volatile
parameter storage to be restored from an installed
memory card. Setting to 'ready' has no effect.rw Enumeration .1.3.6.1.4.1.33.16.7.1.1.25 |
slotDefaultNVSSetting to 'execute' causes non-volatile stored
parameters to be reset to factory defaults. Setting
to 'ready' has no effect.rw Enumeration .1.3.6.1.4.1.33.16.7.1.1.26 |
slotBootTableA list of slot bootstrap status entries. A given
slot has an entry in this table only when
slotOperStatus is one of: loadRequested, loading,
dumpRequested, dumping, paramRequested,
paramLoading SEQUENCE OF SlotBootEntry .1.3.6.1.4.1.33.16.7.2 |
slotBootEntryBootstrap status values for a chassis slot. SlotBootEntry .1.3.6.1.4.1.33.16.7.2.1 |
slotBootIndexAn index value that uniquely identifies a slot,
defined the same as slotIndex.ro INTEGER .1.3.6.1.4.1.33.16.7.2.1.1 |
slotBootIfIndexAn index value that uniquely identifies the
interface in use for bootstrap functions. The
interface identified by a particular value of this
index is the same interface as identified by the
same value of ifIndex.ro INTEGER .1.3.6.1.4.1.33.16.7.2.1.2 |
slotBootNetworkThe instance identifier of the first object in the
conceptual row entry for the segment or port this
interface is using, that is, segmentType or
portType.ro OBJECT IDENTIFIER .1.3.6.1.4.1.33.16.7.2.1.3 |
slotBootProtocolThe protocol in use for bootstrap operation.ro Enumeration .1.3.6.1.4.1.33.16.7.2.1.4 |
slotBoot802AddressIEEE 802 global address in use for bootstrap
operation.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.33.16.7.2.1.5 |
slotBootAddressTypeThe type of network address contained in
slotBootAddress.ro AddressType .1.3.6.1.4.1.33.16.7.2.1.6 |
slotBootAddressThe network address the system in the slot is using
to identify itself for bootstrap operation.ro OCTET STRING .1.3.6.1.4.1.33.16.7.2.1.7 |
slotBootServerAddressTypeThe type of network address contained in
slotBootServerAddress.ro AddressType .1.3.6.1.4.1.33.16.7.2.1.8 |
slotBootServerAddressThe network address of the system supplying
bootstrap services to the system in the slot.ro OCTET STRING .1.3.6.1.4.1.33.16.7.2.1.9 |
slotBootGatewayAddressThe internet address of the router in use for
bootstrap operation.ro IpAddress .1.3.6.1.4.1.33.16.7.2.1.10 |
slotBootFileNameThe full name of the file in use for bootstrap
operation.ro DisplayString .1.3.6.1.4.1.33.16.7.2.1.11 |
slotBootBlockNumberThe current block number being transferred for
bootstrap operation, zero if unknown or not
applicable.ro Gauge .1.3.6.1.4.1.33.16.7.2.1.12 |
slotBootCrashCodeIf slotOperStatus is dumpRequested or dumping, a
code number to identify the crash reason; otherwise
zero length.ro OCTET STRING .1.3.6.1.4.1.33.16.7.2.1.13 |
slotControllerTableA list of controller entries, one for each
controller of each type in each slot. SEQUENCE OF SlotControllerEntry .1.3.6.1.4.1.33.16.7.3 |
slotControllerEntryValues for a controller. SlotControllerEntry .1.3.6.1.4.1.33.16.7.3.1 |
slotControllerTypeThe controller type.ro NetworkType .1.3.6.1.4.1.33.16.7.3.1.1 |
slotControllerIndexAn index value that uniquely identifies a
controller.ro INTEGER .1.3.6.1.4.1.33.16.7.3.1.2 |
slotControllerNetworkThe instance identifier of the first object in the
conceptual row entry for the segment or port this
controller is to use, that is, segmentType or
portType.ro OBJECT IDENTIFIER .1.3.6.1.4.1.33.16.7.3.1.3 |
xPowerSupply OBJECT IDENTIFIER .1.3.6.1.4.1.33.16.8 |
powerSupplyTableA list of power supply entries. SEQUENCE OF PowerSupplyEntry .1.3.6.1.4.1.33.16.8.1 |
powerSupplyEntryValues for a chassis power supply. PowerSupplyEntry .1.3.6.1.4.1.33.16.8.1.1 |
powerSupplyIndexAn index value that uniquely identifies a power
supply, in the range 1 to the number of power supply
slots in the chassis.ro INTEGER .1.3.6.1.4.1.33.16.8.1.1.1 |
powerSupplyAdminActionControl to cause reset of the power supply. When
read, the value is always 'ready'. Setting to
'reset' or 'resetHold' causes a single attempt to
take that action, but does not ensure transition to
any particular value of
powerSupplyRedundancyStatus.rw Enumeration .1.3.6.1.4.1.33.16.8.1.1.2 |
powerSupplyFirmwareVersionVersion number of power supply firmware.ro INTEGER .1.3.6.1.4.1.33.16.8.1.1.3 |
powerSupplyRedundancyStatusThe current redundancy status of the power
supply.ro Enumeration .1.3.6.1.4.1.33.16.8.1.1.4 |
powerSupplyPlus5StatusStatus of the +5 volt power from the power
supply.ro Enumeration .1.3.6.1.4.1.33.16.8.1.1.5 |
powerSupplyPlus12StatusStatus of the +12 volt power from the power
supply.ro Enumeration .1.3.6.1.4.1.33.16.8.1.1.6 |
powerSupplyMinus12StatusStatus of the -12 volt power from the power
supply.ro Enumeration .1.3.6.1.4.1.33.16.8.1.1.7 |
powerSupplyThermalWarningStatusThe current thermal warning status of the power
supply.ro Enumeration .1.3.6.1.4.1.33.16.8.1.1.8 |
powerSupplyThermalShutdownStatusThe current thermal shutdown status of the power
supply.ro Enumeration .1.3.6.1.4.1.33.16.8.1.1.9 |
powerSupplyFanStatusThe current status of the power supply's fan.ro Enumeration .1.3.6.1.4.1.33.16.8.1.1.10 |
powerSupplyHardwareInhibitStatusThe current status of the power supply's hardware
inhibit.ro Enumeration .1.3.6.1.4.1.33.16.8.1.1.11 |
powerSupplyPlus5HistoryHistory of the +5 volt power from the power
supply.ro Enumeration .1.3.6.1.4.1.33.16.8.1.1.12 |
powerSupplyPlus12HistoryHistory of the +12 volt power from the power
supply.ro Enumeration .1.3.6.1.4.1.33.16.8.1.1.13 |
powerSupplyMinus12HistoryHistory of the -12 volt power from the power
supply.ro Enumeration .1.3.6.1.4.1.33.16.8.1.1.14 |
powerSupplyThermalWarningHistoryThe thermal warning history of the power supply.ro Enumeration .1.3.6.1.4.1.33.16.8.1.1.15 |
powerSupplyThermalShutdownHistoryThe thermal shutdown history of the power supply.ro Enumeration .1.3.6.1.4.1.33.16.8.1.1.16 |
powerSupplyFanHistoryThe status history of the power supply's fan.ro Enumeration .1.3.6.1.4.1.33.16.8.1.1.17 |
powerSupplyHardwareInhibitHistoryThe status history of the power supply's hardware
inhibit.ro Enumeration .1.3.6.1.4.1.33.16.8.1.1.18 |
powerSupplyPlus5VoltsIn hundredths, volts of +5 volt power currently
provided by the power supply. A value of 0
indicates unknown.ro Gauge .1.3.6.1.4.1.33.16.8.1.1.19 |
powerSupplyPlus12VoltsIn hundredths, volts of +12 volt power currently
provided by the power supply. A value of 0
indicates unknown.ro Gauge .1.3.6.1.4.1.33.16.8.1.1.20 |
powerSupplyMinus12VoltsIn hundredths, volts of -12 volt power currently
provided by the power supply. A value of 0
indicates unknown.ro Gauge .1.3.6.1.4.1.33.16.8.1.1.21 |
powerSupplyWattsWatts of power currently drawn from this power
supply. A value of 0 indicates unknown.ro Gauge .1.3.6.1.4.1.33.16.8.1.1.22 |
powerSupplyWattsMaxMaximum watts of power available from this power
supply. A value of 0 indicates unknown.ro Gauge .1.3.6.1.4.1.33.16.8.1.1.23 |
powerSupplyChassisWattsTotal watts of power currently drawn by the entire
chassis. A value of 0 indicates unknown.ro Gauge .1.3.6.1.4.1.33.16.8.1.1.24 |
powerSupplyChassisWattsMaxTotal maximum watts of power available from all the
power supplies in the chassis. A value of 0
indicates unknown.ro Gauge .1.3.6.1.4.1.33.16.8.1.1.25 |
powerSupplyHardwareTypeThe type of power supply.ro Enumeration .1.3.6.1.4.1.33.16.8.1.1.26 |
xFirmwareUpdate OBJECT IDENTIFIER .1.3.6.1.4.1.33.16.9 |
firmwareUpdateTableTable of descriptive and status information concerning
the writing of firmware to a target I/O card. SEQUENCE OF FirmwareUpdateEntry .1.3.6.1.4.1.33.16.9.1 |
firmwareUpdateEntryAn entry in the table concerning the writing of
firmware to a target I/O card. FirmwareUpdateEntry .1.3.6.1.4.1.33.16.9.1.1 |
firmwareUpdateSlotIndexThis variable identifies the slot to which is to
be the target of the firmware update.ro INTEGER .1.3.6.1.4.1.33.16.9.1.1.1 |
firmwareUpdateDefaultFileNameThis variable when read will obtain the default
file name from the target.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.33.16.9.1.1.2 |
firmwareUpdateFileNameThis variable contains the name of the file to be
read from the flash memory card and written to the
target.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.33.16.9.1.1.3 |
firmwareUpdateStatusThis variable is used to start the update process.
The agent always 'ready' for this value. Setting this
value to 'execute' causes the agent to write the file
specified by firmwareUpdateFileName to be written to
the taget. Setting this value to 'execute' when
firmwareUpdateFileName has not been written or when
firmwareUpdateState is 'writing' causes bad value to be
returned.rw Enumeration .1.3.6.1.4.1.33.16.9.1.1.4 |
firmwareUpdateStateThis variable indicates the current state of firmware
update, 'idle' indicates that firmware update may be
initiated, and 'writing' indicates that an update is in
process.ro Enumeration .1.3.6.1.4.1.33.16.9.1.1.5 |
firmwareUpdateCompletionStatusThis variable indicates the completion status of the
the last firmware update attempt. 'none' indicates
that no firmware update has yet been attempted.ro Enumeration .1.3.6.1.4.1.33.16.9.1.1.6 |
firmwareUpdateMethodThis variable indicates the method of update of the
firmware update attempt.rw Enumeration .1.3.6.1.4.1.33.16.9.1.1.7 |