MPLS-LC-ATM-MIB-DRAFT-01
AI MIB Summary
The MPLS-LC-ATM-MIB-DRAFT-01 module provides managed object definitions for monitoring and configuring MPLS Label Controlled ATM interfaces, specifically tracking label binding states, virtual circuit (VCC) status, and traffic statistics for ATM-based MPLS networks as standardized in RFC 3035.
This MIB contains managed object definitions for MPLS Label Controlled ATM interfaces as defined in RFC3035.
Main OID:
mplsLcAtmMIB.1.3.6.1.2.1.10.166.1
17
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
17 total| Object Name |
|---|
mplsLcAtmMIBThis MIB contains managed object definitions for MPLS Label Controlled ATM interfaces as defined in RFC3035. MODULE-IDENTITY .1.3.6.1.2.1.10.166.1 |
mplsLcAtmNotifications OBJECT IDENTIFIER .1.3.6.1.2.1.10.166.1.0 |
mplsLcAtmObjects OBJECT IDENTIFIER .1.3.6.1.2.1.10.166.1.1 |
mplsLcAtmIfConfTableThis table specifies per-interface MPLS LC-ATM capability and associated information. In particular, this table extends the MPLS-LSR MIB's mplsInterfaceConfTable. SEQUENCE OF MplsLcAtmIfConfEntry .1.3.6.1.2.1.10.166.1.1.1 |
mplsLcAtmIfConfEntryAn entry in this table is created by an LSR for every interface capable of supporting MPLS LC-ATM. Each entry in this table will exist only if a corresponding entry in ifTable and mplsInterfaceConfTable exist. If the associated entries in ifTable and mplsInterfaceConfTable are deleted, the corresponding entry in this table must also be deleted shortly thereafter. MplsLcAtmIfConfEntry .1.3.6.1.2.1.10.166.1.1.1.1 |
mplsLcAtmCtrlVpiThis is the VPI value over which this LSR is willing to accept control traffic on this interface.rw AtmVpIdentifier (ATM-TC-MIB) .1.3.6.1.2.1.10.166.1.1.1.1.1 |
mplsLcAtmCtrlVciThis is the VCI value over which this LSR is willing to accept control traffic on this interface.rw MplsAtmVcIdentifier (MPLS-TC-STD-MIB) .1.3.6.1.2.1.10.166.1.1.1.1.2 |
mplsLcAtmUnlabTrafVpiThis is the max VPI value over which this LSR is willing to accept unlabeled traffic on this interface.rw AtmVpIdentifier (ATM-TC-MIB) .1.3.6.1.2.1.10.166.1.1.1.1.3 |
mplsLcAtmUnlabTrafVciThis is the VCI value over which this LSR is willing to accept unlabled traffic on this interface.rw MplsAtmVcIdentifier (MPLS-TC-STD-MIB) .1.3.6.1.2.1.10.166.1.1.1.1.4 |
mplsLcAtmVcMergeIf set to true(0), indicates that this interface is capabile of ATM VC merge, otherwise it MUST be set to false(1).rw TruthValue (SNMPv2-TC) .1.3.6.1.2.1.10.166.1.1.1.1.5 |
mplsLcAtmIfConfRowStatusThis is object is used to create and delete entries in this table. When configuring entries in this table, the corresponding corresponding ifEntry and mplsInterfaceConfEntry MUST exist before hand. If an entry is attempted to be created by a manager for a corresponding mplsInterfaceConfEntry that does not support LC-ATM, the agent MUST return an inconsistentValue error. If this table is implemented read-only, then the agent must set this object to active(1) when this row is made active. If this table is implemented writable, then an agent MUST not allow modification to its objects once this value is set to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.2.1.10.166.1.1.1.1.6 |
mplsLcAtmIfConfStoreTypeThis SNMP storage type for this entry. All objects are writable for permanent objects.rw StorageType (SNMPv2-TC) .1.3.6.1.2.1.10.166.1.1.1.1.7 |
mplsLcAtmConformance OBJECT IDENTIFIER .1.3.6.1.2.1.10.166.1.2 |
mplsLcAtmCompliances OBJECT IDENTIFIER .1.3.6.1.2.1.10.166.1.2.1 |
mplsLcAtmModuleComplianceCompliance statement for agents that support MPLS LC-ATM Interfaces. Unknown .1.3.6.1.2.1.10.166.1.2.1.1 |
mplsLcAtmGroups OBJECT IDENTIFIER .1.3.6.1.2.1.10.166.1.2.2 |
mplsLcAtmIfGroupCollection of objects needed for MPLS LC-ATM interface configuration. Unknown .1.3.6.1.2.1.10.166.1.2.2.1 |