MICOM-MPANL-SIGNALING-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for MICOM-MPANL-SIGNALING-MIB.
83
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
83 total| Object Name |
|---|
micom-msm OBJECT IDENTIFIER .micom-oscar.19 |
RFC1155-SMI Unknown .micom-oscar.19 |
mcmMSMProfileReceivedFromPassportNAME = ;
DESC = PANL Signaling Protocol established. \
Severity Level: INFORMATIVE.;
HELP = Profile is received from Passport. This is a Normal\
condition.; TRAP-TYPE .micom-oscar.19.0.1 |
mcmMpanlInterfaceLinkUpNAME = ;
DESC = This trap will be generated when the LAPF link \
connection for the PANL signaling comes up. \
Severity Level: INFORMATIVE.;
HELP = The MSM LAPF link connection Is up. Normal MSM LAPF \
Link establishment.; TRAP-TYPE .micom-oscar.19.0.2 |
mcmMpanlInterfaceLinkDownNAME = ;
DESC = This trap will be generated when the LAPF link \
connection for the PANL signaling goes down. \
Severity Level: CRITICAL.;
HELP = Please check device configuration, and connection.\
If problem persist, You may need field \
personnel's assistance.; TRAP-TYPE .micom-oscar.19.0.3 |
mcmMpanlPrefixDNAhasNotBeenConfiguredNAME = ;
DESC = This trap will be generated from the MPANL \
signaling module. It will trigger if the \
DNA has not been configured. \
Severity Level: CRITICAL.;
HELP = Please provision(configure) the DNA address \
of the access device. This may imply the DNA address \
is missing.; TRAP-TYPE .micom-oscar.19.0.4 |
mcmMpanlPrefixDNAChangedWithoutDeassociationNAME = ;
DESC = This trap will be generated from the PANL \
signaling module. It will trigger if the \
latest association will displace the earlier \
assoiciation with a different netlink. \
Severity Level: INFORMATIVE.;
HELP = Please verify the DNA association number.; TRAP-TYPE .micom-oscar.19.0.5 |
mcmMpanlIncompatibleTypeNAME = ;
DESC = This trap will be generated from the PANL \
signaling module. It will trigger if a micom \
access device tries to attempt to communicate \
with a nortel access device, which is prohibited. \
Severity Level: CRITICAL.;
HELP = It is noted that micom access device does not \
communicate with the nortel access device.; TRAP-TYPE .micom-oscar.19.0.6 |
configuration OBJECT IDENTIFIER .micom-oscar.19.1 |
mcmMSMProfileCfgGroup OBJECT IDENTIFIER .micom-oscar.19.1.1 |
mcmMSMProfileCfgGroupNodeIDNAME = ;
DESC = The value of this object represents a unique \
identifier for an access device. (Operational);
HELP = ;
CAPABILITIES = NET_DISP, VPN_DISP;ro INTEGER .micom-oscar.19.1.1.1 |
mcmMSMProfileCfgGroupCustomerIDNAME = ;
DESC = The value of this object uniquely identifies \
a customer to which a given access device belongs. \
(Operational);
HELP = ;
CAPABILITIES = NET_DISP, VPN_DISP;ro INTEGER .micom-oscar.19.1.1.2 |
mcmMSMProfileCfgGroupDNAPrefixNAME = ;
DESC = The value of this object specifies the prefix of the \
Directory Network Address which uniquely identifies \
the unit within the network topology. (Operational);
HELP = ;
CAPABILITIES = NET_DISP, VPN_DISP;ro DisplayString .micom-oscar.19.1.1.3 |
nvmMSMProfileCfgGroup OBJECT IDENTIFIER .micom-oscar.19.1.2 |
nvmMSMProfileCfgGroupNodeIDNAME = ;
DESC = The value of this object represents a unique \
identifier for an access device. (Configuration);
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;rw INTEGER .micom-oscar.19.1.2.1 |
nvmMSMProfileCfgGroupCustomerIDNAME = ;
DESC = The value of this object uniquely identifies \
a customer to which a given access device belongs. \
Also, this is used by the NAC in registering the \
Egress table. (Configuration);
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;rw INTEGER .micom-oscar.19.1.2.2 |
nvmMSMProfileCfgGroupDNAPrefixNAME = ;
DESC = The value of this object specifies the prefix of the \
Directory Network Address which uniquely identifies \
the unit within the network topology. (Configuration);
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;rw DisplayString .micom-oscar.19.1.2.3 |
mcmMSMDTELinkCfgTableNAME = ;
DESC = The MPANL DTE Signaling Line Parameters \
table. (Operational);
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP; SEQUENCE OF McmMSMDTELinkCfgEntry .micom-oscar.19.1.3 |
mcmMSMDTELinkCfgEntryNAME = ;
DESC = An entry in the MPANL DTE Signaling Line Parameters \
table. (Operational);
HELP = ;
CAPABILITIES = ; McmMSMDTELinkCfgEntry .micom-oscar.19.1.3.1 |
mcmMSMDTELinkCfgIfIndexNAME = ;
DESC = Ifindex associated with the MPANL DTE line \
parameters.;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.19.1.3.1.1 |
mcmMSMDTELinkCfgMaxSubChannelRangeNAME = ;
DESC = The value of this object represents the highest \
DLCI value to be used for sub-channel (CID) allocation. \
(Note that the current default value, 63, may change \
depending on the VoFR agreements.) Note that user \
DLCIs on the MPANL start at DLCI-17. This \
information is signaled from the DTE to the DCE. \
(Operational);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.19.1.3.1.2 |
mcmMSMDTELinkCfgDTEReceiverBWNAME = ;
DESC = The value of this object represents the maximum \
throughput (in bits/sec) that the MPANL DCE is \
capable of transmitting(not less than 16Kbs \
and not exceeding the Access Link bandwidth). \
Several SVCs inside the netlink may use this \
bandwidth. Each SVC will consume a part of \
this bandwidth.\
(Operational);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.19.1.3.1.3 |
mcmMSMDTELinkCfgDCEReceiverBWNAME = ;
DESC = The value of this object represents the maximum \
throughput (in bits/sec) that the MPANL DTE is \
capable of transmitting(not less than 16Kbs \
and not exceeding the Access Link bandwidth). \
Several SVCs inside the netlink may use this \
bandwidth. Each SVC will consume a part of this \
bandwidth.\
(Operational);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.19.1.3.1.4 |
mcmMSMDTELinkCfgDTEMaxFrameSizeNAME = ;
DESC = The value of this object represents the maximum \
frame size (in bytes) that the MPANL DCE is capable \
of transmitting. This value is signaled from the \
DTE to the DCE where it is used by the VoFR procedure \
in the wan driver to manage frame delay by fragmenting \
VoFR frames. Multiple VoFR frames can constitute a frame \
relay frame.\
(Operational);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.19.1.3.1.5 |
mcmMSMDTELinkCfgDCEMaxFrameSizeNAME = ;
DESC = The value of this object represents the maximum \
frame size (in bytes) that the MPANL DTE is capable \
of transmitting. This value is signaled from the \
DTE to the DCE where it is used by the VoFR procedure \
in the wan driver to manage frame delay by fragmenting \
VoFR frames. Multiple VoFR frames can constitute a frame \
relay frame.\
(Operational);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.19.1.3.1.6 |
nvmMSMDTELinkCfgTableNAME = ;
DESC = The MPANL DTE Signaling Line Parameters \
table. (Configuration);
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP; SEQUENCE OF NvmMSMDTELinkCfgEntry .micom-oscar.19.1.4 |
nvmMSMDTELinkCfgEntryNAME = ;
DESC = An entry in the MPANL DTE Signaling Line Parameters \
table. (Configuration);
HELP = ;
CAPABILITIES = ; NvmMSMDTELinkCfgEntry .micom-oscar.19.1.4.1 |
nvmMSMDTELinkCfgIfIndexNAME = ;
DESC = Ifindex associated with the MPANL DTE line \
parameters.;
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.19.1.4.1.1 |
nvmMSMDTELinkCfgMaxSubChannelRangeNAME = ;
DESC = The value of this object represents the highest \
DLCI value to be used for sub-channel allocation. \
(Note that the current default value, 63, may change \
depending on the VoFR agreements.) Note that user \
DLCIs on the MPANL start at DLCI-17. This \
information is signaled from the DTE to the DCE. \
(Configuration);
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.19.1.4.1.2 |
nvmMSMDTELinkCfgDTEReceiverBWNAME = ;
DESC = The value of this object represents the maximum \
throughput (in bits/sec) that the MPANL DCE is \
capable of transmitting(not less than 16Kbs \
and not exceeding the Access Link bandwidth). \
Several SVCs inside the netlink may use this \
bandwidth. Each SVC will consume a part of \
this bandwidth.\
(Configuration);
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.19.1.4.1.3 |
nvmMSMDTELinkCfgDCEReceiverBWNAME = ;
DESC = The value of this object represents the maximum \
throughput (in bits/sec) that the MPANL DTE is \
capable of transmitting(not less than 16Kbs \
and not exceeding the Access Link bandwidth). \
Several SVCs inside the netlink may use this \
bandwidth. Each SVC will consume a part of this \
bandwidth.\
(Configuration);
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.19.1.4.1.4 |
nvmMSMDTELinkCfgDTEMaxFrameSizeNAME = ;
DESC = The value of this object represents the maximum \
frame size (in bytes) that the MPANL DCE is capable \
of transmitting. This value is signaled from the \
DTE to the DCE where it is used by the VoFR procedure \
in the wan driver to manage frame delay by fragmenting \
VoFR frames. Multiple VoFR frames can constitute a frame \
relay frame.\
(Configuration);
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.19.1.4.1.5 |
nvmMSMDTELinkCfgDCEMaxFrameSizeNAME = ;
DESC = The value of this object represents the maximum \
frame size (in bytes) that the MPANL DTE is capable \
of transmitting. This value is signaled from the \
DTE to the DCE where it is used by the VoFR procedure \
in the wan driver to manage frame delay by fragmenting \
VoFR frames. Multiple VoFR frames can constitute a frame \
relay frame.\
(Configuration);
CAPABILITIES = ;rw INTEGER .micom-oscar.19.1.4.1.6 |
nvmMSMDTELinkCfgEntryStatusNAME = ;
DESC = This object was obsoleted as of release \
3.0; and is included here only to support \
backwards compatibility for software \
versions prior to release 3.0. \
This object is used in the MSM profile table \
to add new rows, modify existing rows, \
and delete existing rows. (Configuration);
HELP = ;
CAPABILITIES = ;rwobsolete Enumeration .micom-oscar.19.1.4.1.7 |
control OBJECT IDENTIFIER .micom-oscar.19.2 |
mcmMSMLAPFConnectionsCntrTableNAME = ;
DESC = This table was obsoleted as of release \
3.0; and is included here only to support \
backwards compatibility for software \
versions prior to release 3.0. \
The MSM LAP-F connections counter reset table.;
HELP = ;
CAPABILITIES = NET_OPER, VPN_OPER;obsolete SEQUENCE OF McmMSMLAPFConnectionsCntrEntry .micom-oscar.19.2.1 |
mcmMSMLAPFConnectionsCntrEntryNAME = ;
DESC = An entry in the MSM LAP-F connections counter \
reset table.;
HELP = ;
CAPABILITIES = ;obsolete McmMSMLAPFConnectionsCntrEntry .micom-oscar.19.2.1.1 |
mcmMSMLAPFConnectionsCntrIndexNAME = ;
DESC = The value of this object corresponds to a value \
of IfIndex, and is used as the index into the \
MSM LAP-F connections counter reset table. \
This index specifies the particular row of counter \
objects to be reset, and has the identical value as \
mcmMSMStatsLAPFConnIfIndex.;
HELP = ;
CAPABILITIES = ;roobsolete INTEGER .micom-oscar.19.2.1.1.1 |
mcmMSMLAPFConnectionsCntrActionNAME = ;
DESC = Setting this object to reset(1) will zero \
the values of a specific row of counters in \
the MPANL Signaling Statistics for LAP-F \
connections table.;
HELP = When set to reset(1), a row containing \
the following counter objects are reset: \
mcmMSMStatsLAPFConnReestablished \
mcmMSMStatsLAPFConnEstablished \
mcmMSMStatsLAPFConnDisconnects;
CAPABILITIES = ;rwobsolete Enumeration .micom-oscar.19.2.1.1.2 |
statistics OBJECT IDENTIFIER .micom-oscar.19.3 |
mcmMSMStatsLAPFConnTableNAME = ;
DESC = The MPANL Signaling Statistics for LAP-F connections \
table.; \
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP; SEQUENCE OF McmMSMStatsLAPFConnEntry .micom-oscar.19.3.1 |
mcmMSMStatsLAPFConnEntryNAME = ;
DESC = An entry in the MPANL Signaling Statistics for LAP-F \
connections table.; \
HELP = ;
CAPABILITIES = ; McmMSMStatsLAPFConnEntry .micom-oscar.19.3.1.1 |
mcmMSMStatsLAPFConnIfIndexNAME = ;
DESC = The value of this object corresponds to a value \
of IfIndex, and is used as the index into the \
MSM Statistics for LAP-F connections table.;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.19.3.1.1.1 |
mcmMSMStatsLAPFConnReestablishedNAME = ;
DESC = This object was obsoleted as of release \
3.0; and is included here only to support \
backwards compatibility for software \
versions prior to release 3.0. \
Counter representing the number of times the LAP-F \
connection was attempted to be re-established. This counter \
indicates the number of CONNECT_REQ messages \
sent to the LAP-F module.;
HELP = ;
CAPABILITIES = ;roobsolete Counter .micom-oscar.19.3.1.1.2 |
mcmMSMStatsLAPFConnEstablishedNAME = ;
DESC = Counter representing the number of times the LAP-F \
connection was established. This counter indicates \
the number of CONNECT_IND messages sent by \
the LAP-F module.;
HELP = ;
CAPABILITIES = ;ro Counter .micom-oscar.19.3.1.1.3 |
mcmMSMStatsLAPFConnDisconnectsNAME = ;
DESC = Counter representing the number of times a LAP-F \
connection was broken. This counter indicates \
the number of DISCONNECT_IND messages sent by \
the LAP-F module.;
HELP = ;
CAPABILITIES = ;ro Counter .micom-oscar.19.3.1.1.4 |
mcmMSMStatsProfileTxCntNAME = ;
DESC = Counter represents the number of profiles \
sent without the occurrence of a restart request.;
HELP = ;
CAPABILITIES = ;ro Counter .micom-oscar.19.3.1.1.5 |
mcmMSMStatsProfileRxCntNAME = ;
DESC = Counter represents the number of profiles \
received without the occurrence of a restart request.;
HELP = ;
CAPABILITIES = ;ro Counter .micom-oscar.19.3.1.1.6 |
mcmMSMStatsRestartReqTxCntNAME = ;
DESC = Counter representing the number \
of restart requests sent.;
HELP = ;
CAPABILITIES = ;ro Counter .micom-oscar.19.3.1.1.7 |
mcmMSMStatsRestartReqRxCntNAME = ;
DESC = Counter representing the number \
of restart requests received.;
HELP = ;
CAPABILITIES = ;ro Counter .micom-oscar.19.3.1.1.8 |
mcmMSMStatsDnaAssociationCntNAME = ;
DESC = Counter representing the number \
of DNA prefix associations.;
HELP = ;
CAPABILITIES = ;ro Counter .micom-oscar.19.3.1.1.9 |
mcmMSMStatsDnaDeassociationCntNAME = ;
DESC = Counter representing the number \
of DNA prefix de-associations.;
HELP = ;
CAPABILITIES = ;ro Counter .micom-oscar.19.3.1.1.10 |
mcmMSMStatsPANLInfoElementsTxCntNAME = ;
DESC = Counter representing the number \
of PANL information elements sent.;
HELP = ;
CAPABILITIES = ;ro Counter .micom-oscar.19.3.1.1.11 |
mcmMSMStatsPANLInfoElementsRxCntNAME = ;
DESC = Counter representing the number \
of PANL information elements received.;
HELP = ;
CAPABILITIES = ;ro Counter .micom-oscar.19.3.1.1.12 |
mcmMSMDTELinkStatsTableNAME = ;
DESC = This table was deprecated as of release \
3.0; and is included here only to support \
backwards compatibility for software \
versions prior to release 3.0. \
The MPANL DTE Signaling Line Parameters \
table. (Operational);
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;deprecated SEQUENCE OF McmMSMDTELinkStatsEntry .micom-oscar.19.3.2 |
mcmMSMDTELinkStatsEntryNAME = ;
DESC = An entry in the MPANL DTE Signaling Line Parameters \
table. (Operational);
HELP = ;
CAPABILITIES = ;deprecated McmMSMDTELinkStatsEntry .micom-oscar.19.3.2.1 |
mcmMSMDTELinkStatsIfIndexNAME = ;
DESC = Ifindex associated with the MPANL DTE line \
parameter statistics and status.;
HELP = ;
CAPABILITIES = ;rodeprecated INTEGER .micom-oscar.19.3.2.1.1 |
mcmMSMDTELinkStatsStatusNAME = ;
DESC = MPANL Signaling protocol status of the DTE Line.;
HELP = ;
CAPABILITIES = ;rodeprecated Enumeration .micom-oscar.19.3.2.1.2 |
mcmMSMDTELinkStatsLocalCompNameNAME = ;
DESC = Local sites Component name;
HELP = ;
CAPABILITIES = ;rodeprecated DisplayString .micom-oscar.19.3.2.1.3 |
mcmMSMDTELinkStatsRemoteCompNameNAME = ;
DESC = Remote sites Component name;
HELP = ;
CAPABILITIES = ;rodeprecated DisplayString .micom-oscar.19.3.2.1.4 |
status OBJECT IDENTIFIER .micom-oscar.19.4 |
mcmMSMLinkStatusTableNAME = ;
DESC = The PANL Link Status Parameters \
table.;
HELP = ;
CAPABILITIES = NET_DISP, VPN_DISP; SEQUENCE OF McmMSMLinkStatusEntry .micom-oscar.19.4.1 |
mcmMSMLinkStatusEntryNAME = ;
DESC = An entry in the PANL Link Status Parameters \
table.;
HELP = ;
CAPABILITIES = ; McmMSMLinkStatusEntry .micom-oscar.19.4.1.1 |
mcmMSMLinkStatusIfIndexNAME = ;
DESC = Ifindex associated with the PANL link \
parameter status table.;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.19.4.1.1.1 |
mcmMSMLinkStatusInterfaceTypeNAME = ;
DESC = Indicates the link status interface type.;
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.19.4.1.1.2 |
mcmMSMLinkStatusLAPFStatusNAME = ;
DESC = The status of the LAPF link connection \
for the PANL signaling protocol.;
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.19.4.1.1.3 |
mcmMSMLinkStatusLocalCompNameNAME = ;
DESC = Local site's Component name. \
This is a function of the MIB II \
sysName and a unique PANL ifindex;
HELP = ;
CAPABILITIES = ;ro DisplayString .micom-oscar.19.4.1.1.4 |
mcmMSMLinkStatusRemoteCompNameNAME = ;
DESC = Remote site's Component name;
HELP = ;
CAPABILITIES = ;ro DisplayString .micom-oscar.19.4.1.1.5 |
mcmMSMLinkStatusRemoteGenCfgTypeNAME = ;
DESC = Indicates the device type of the remote unit. \
(i.e. The type of the unit directly connected \
to this particular netlink DTE/DCE interface.;
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.19.4.1.1.6 |
mcmMSMLinkStatusPANLStatusNAME = ;
DESC = Indicates the current PANL status.;
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.19.4.1.1.7 |
mcmMSMDCELinkStatusTableNAME = ;
DESC = The PANL DCE Link Status Parameters \
table.;
HELP = ;
CAPABILITIES = NET_DISP, VPN_DISP; SEQUENCE OF McmMSMDCELinkStatusEntry .micom-oscar.19.4.2 |
mcmMSMDCELinkStatusEntryNAME = ;
DESC = An entry in the PANL DCE Link Status Parameters \
table.;
HELP = ;
CAPABILITIES = ; McmMSMDCELinkStatusEntry .micom-oscar.19.4.2.1 |
mcmMSMDCELinkStatusIfIndexNAME = ;
DESC = Ifindex associated with the PANL DCE link \
parameter status.;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.19.4.2.1.1 |
mcmMSMDCELinkStatusRemoteNodeIdNAME = ;
DESC = DCE Remote Node Id.;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.19.4.2.1.2 |
mcmMSMDCELinkStatusRemoteCustIdNAME = ;
DESC = DCE Remote Customer Id.;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.19.4.2.1.3 |
mcmMSMDCELinkStatusRemoteRxBwNAME = ;
DESC = DCE Remote Receiving Bandwidth.;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.19.4.2.1.4 |
mcmMSMDCELinkStatusRemoteMaxFrameSizeNAME = ;
DESC = DCE Remote Maximum Frame Size.;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.19.4.2.1.5 |
mcmMSMDCELinkStatusRemoteDLCIRangeNAME = ;
DESC = The highest DLCI value to be used for the \
remote side.;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.19.4.2.1.6 |
mcmMSMDNAStatusTableNAME = ;
DESC = The Associated DNA Status Parameters \
table.;
HELP = ;
CAPABILITIES = NET_DISP, VPN_DISP; SEQUENCE OF McmMSMDNAStatusEntry .micom-oscar.19.4.3 |
mcmMSMDNAStatusEntryNAME = ;
DESC = An entry in the associated DNA status \
table.;
HELP = ;
CAPABILITIES = ; McmMSMDNAStatusEntry .micom-oscar.19.4.3.1 |
mcmMSMDNAStatusPrefixNumberNAME = ;
DESC = DNA Prefix number of the attached device \
(directly or cascaded).;
HELP = ;
CAPABILITIES = ;ro DisplayString .micom-oscar.19.4.3.1.1 |
mcmMSMDNAStatusIfIndexNAME = ;
DESC = Ifindex value showing the appropriate DCE \
PANL interface corresponding to the specified \
DNA prefix.;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.19.4.3.1.2 |
mcmMSMDNAStatusAssociationNAME = ;
DESC = DNA Association Status corresponding to \
the specified DNA Prefix.;
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.19.4.3.1.3 |