MICOM-SYS-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
156
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
156 total| Object Name |
|---|
micom-system OBJECT IDENTIFIER .micom-oscar.1 |
RFC1155-SMI Unknown .micom-oscar.1 |
mcmSysMainPowerSupplyFailureNAME = ;
DESC = System TRAP message: indication of Power Supply \
failure.\
Severity Level: CRITICAL.;
HELP = Power Supply Jumper may not be set properly.\
Please contact the System Administrator, or\
field Personnel.; TRAP-TYPE .micom-oscar.1.0.1 |
mcmSysChassisFanFailureNAME = ;
DESC = System TRAP message: indication of a chassis \
FAN failure on the access device.\
Severity Level: MINOR.;
HELP = Fan is not running. Please contact the System\
administrator, or Filed Personnel.; TRAP-TYPE .micom-oscar.1.0.2 |
mcmSysSystemResetNAME = ;
DESC = System TRAP message: indication of system Reset \
(warm start).\
Severity Level: INFORMATIVE.;
HELP = A system reset has occured. If normal \
operation did not resume after the Reset, Please \
contact the System Administrator, or Field \
Personnel.; TRAP-TYPE .micom-oscar.1.0.3 |
mcmSysBatteryLowNAME = ;
DESC = System TRAP message: Indication of Battery Low.\
Severity Level: MINOR.;
HELP = The access device is experiencing a Battery \
Low condition. Please contact the System \
Administrator or Field Personnel.; TRAP-TYPE .micom-oscar.1.0.4 |
mcmSysConfigChangedNAME = ;
DESC = An indication of configuration change in \
the access device.\
Severity Level: MAJOR.;
HELP = Configuration has changed in access device. Please \
consult the System Administrator, or Field Personnel \
if the configuration has affected your applications.; TRAP-TYPE .micom-oscar.1.0.5 |
mcmSysCPUUtilExceededNAME = ;
DESC = System TRAP message: Indication of CPU Utilization \
exceeded for configured threshold.\
Severity Level: MAJOR.;
HELP = The access device has exceeded its configured threshold \
value for CPU Utilization.
This value can be changed using set sys traps cpu 1 - 100.\
Or Consult your system Administrator, or field Personnel if \
this value needs to be changed.; TRAP-TYPE .micom-oscar.1.0.6 |
mcmSysBandwidthUtilExceededNAME = ;
DESC = System TRAP message: Indication of Bandwidth \
Utilization exceeded for configured threshold.\
Severity Level: MAJOR.;
HELP = The access device has exceeded its Configured \
threshold value for its bandwidth utilization. \
This value can be changed using set sys traps \
bandwidth 1-100 or Consult your system \
Administrator, or Field Personnel if this value needs \
to be changed.; TRAP-TYPE .micom-oscar.1.0.7 |
mcmSysRAMUtilExceededNAME = ;
DESC = System TRAP message: Indication of RAM \
Utilization exceeded for configured threshold.\
Severity Level: MAJOR.;
HELP = It is an indication of surpassing the configured \
value for RAM utilization. This value can be changed
using set sys traps ram 1-100 or Consult your system \
administrator, or Field Personnel if this value needs \
to be changed.; TRAP-TYPE .micom-oscar.1.0.8 |
mcmSysRollbackEnabledNAME = ;
DESC = System TRAP message: Indication of System \
Rollback Feature enabled.\
Severity Level: INFORMATIVE.;
HELP = This is an indication of the Rollback feature \
being enabled. Please disable this feature if \
it is not desired, or consult your System Admin.\
or Field Personnel.; TRAP-TYPE .micom-oscar.1.0.9 |
mcmSysRollbackDisabledNAME = ;
DESC = System TRAP message: Indication of System \
Rollback Feature disabled.\
Severity Level: INFORMATIVE.;
HELP = This is an indication of the Rollback feature \
being disabled. Please enable this feature if \
it is required. Otherwise, consult your system \
admin. or Field Personnel.; TRAP-TYPE .micom-oscar.1.0.10 |
mcmSysRollbackArmedNAME = ;
DESC = System TRAP message: Indication of System \
Rollback Feature armed, resulting from User \
committing/activating Code/Config Bank for \
next reset.\
Severity Level: INFORMATIVE.;
HELP = This is an indication of user committing a new \
code bank/Config Bank after the access device \
is reset the next time around. If this \
condition is not needed, consult your System \
Admin. or Field personnel.; TRAP-TYPE .micom-oscar.1.0.11 |
mcmSysRollbackDisarmedNAME = ;
DESC = System TRAP message: Indication of System \
Rollback Feature confirmed for this session.\
Severity Level: INFORMATIVE.;
HELP = This is a condition of disarming previously \
committed Code Bank/config Bank that was going \
to occur after a reset. If it is not desirable, \
reverse the condition., ; TRAP-TYPE .micom-oscar.1.0.12 |
sys-configuration OBJECT IDENTIFIER .micom-oscar.1.1 |
mcmSysHWTypeGroup OBJECT IDENTIFIER .micom-oscar.1.1.1 |
mcmSysHWTypeModelTypeNAME = ;
DESC = **NOTE: THIS OBJECT HAS BEEN \
DEPRECATED. Its functionality \
has been replaced by the \
mcmSysHWTypeCPUType object \
located below in this group.**\
\
The model name/type of the \
access device.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;rodeprecated DisplayString .micom-oscar.1.1.1.1 |
mcmSysHWTypeRevisionLevelNAME = ;
DESC = The revision level of the \
access device.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;ro INTEGER .micom-oscar.1.1.1.2 |
mcmSysHWTypeManufRevDateNAME = ;
DESC = The manufacture/revision date \
of the access device .;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;ro DisplayString .micom-oscar.1.1.1.3 |
mcmSysHWTypeSerialNumberNAME = ;
DESC = The serial number of \
the access device..;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;ro DisplayString .micom-oscar.1.1.1.4 |
mcmSysHWTypeModuleIDNAME = ;
DESC = The module ID of the access \
device.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;ro INTEGER .micom-oscar.1.1.1.5 |
mcmSysHWTypeMACAddressNAME = ;
DESC = The base MAC address assigned \
to the access device.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;ro OCTET STRING .micom-oscar.1.1.1.6 |
mcmSysHWTypeCPUTypeNAME = ;
DESC = Indicates the CPU type for this \
access device;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;ro DisplayString .micom-oscar.1.1.1.7 |
mcmSysHWTypeGenCfgTypeNAME = ;
DESC = Indicates the model type for this \
access device.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;ro Enumeration .micom-oscar.1.1.1.8 |
mcmSysCfgGroup OBJECT IDENTIFIER .micom-oscar.1.1.2 |
mcmSysCfgCPUConfigurationNAME = ;
DESC = The CPU configuration for this
access device.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;ro Enumeration .micom-oscar.1.1.2.1 |
mcmSysCfgPrimaryWANPortNAME = ;
DESC = Indicates the presence of the \
Primary WAN port.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;ro Enumeration .micom-oscar.1.1.2.2 |
mcmSysCfgPrimaryWANPortPhyMediaNAME = ;
DESC = Indicates the physical media
of Primary WAN port.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;ro Enumeration .micom-oscar.1.1.2.3 |
mcmSysCfgDCESerialPortPhyMediaNAME = ;
DESC = Indicates the detected DCE \
serial port on the access \
device.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;ro Enumeration .micom-oscar.1.1.2.4 |
mcmSysCfgQUICCExpansionModule1NAME = ;
DESC = QUICC Expansion module detected.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;ro Enumeration .micom-oscar.1.1.2.5 |
mcmSysCfgQUICCExpansionModule2NAME = ;
DESC = QUICC Expansion module-2 is detected.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;ro Enumeration .micom-oscar.1.1.2.6 |
mcmSysCfgFeatureRTCBatteryStatusNAME = ;
DESC = TimeOfDay/SRAM module detected.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;ro Enumeration .micom-oscar.1.1.2.7 |
mcmSysCfgDRAMSizeNAME = ;
DESC = Total installed DRAM memory size in megabytes.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;ro Enumeration .micom-oscar.1.1.2.8 |
mcmSysCfgFlashMemorySizeNAME = ;
DESC = Total installed Flash memory size in megabytes.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;ro Enumeration .micom-oscar.1.1.2.9 |
mcmSysLimTableNAME = ;
DESC = Table to view an individual Logical \
Interface Modules(LIM) on the access \
device.;
HELP = Table to view the hardware \
CAPABILITIES = NET_CFG, VPN_DISP; SEQUENCE OF McmSysLimEntry .micom-oscar.1.1.3 |
mcmSysLimEntryNAME = ;
DESC = Entry pertaining to a specific logical module.;
HELP = This includes the Name, Part number, and rev. level.;
CAPABILITIES = ; McmSysLimEntry .micom-oscar.1.1.3.1 |
mcmSysLimModuleAddressNAME = ;
DESC = lim (logical interface module) identifies \
the address of the module within the unit;
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.1.1.3.1.1 |
mcmSysLimModuleNameNAME = ;
DESC = Displays the name of the module \
in the specific location;
NOTE : this object was previously named \
mcmSysCardModuleName.;
HELP = ;
CAPABILITIES = ;ro DisplayString .micom-oscar.1.1.3.1.2 |
mcmSysLimPcbPartNumberNAME = ;
DESC = Displays the part number of the module in \
the specific location;
HELP = ;
CAPABILITIES = ;ro DisplayString .micom-oscar.1.1.3.1.3 |
mcmSysLimPcbReleaseNAME = ;
DESC = Displays the release level of the module in \
the specific location.;
HELP = ;
CAPABILITIES = ;ro DisplayString .micom-oscar.1.1.3.1.4 |
mcmSysLimSerialNumberNAME = ;
DESC = Displays the serial number of the module in \
the specific location.;
HELP = ;
CAPABILITIES = ;ro DisplayString .micom-oscar.1.1.3.1.5 |
mcmSysLimMfgDateNAME = ;
DESC = Displays the manufacturing date of the module in \
the specific location.;
HELP = ;
CAPABILITIES = ;ro DisplayString .micom-oscar.1.1.3.1.6 |
mcmSysChassisGroup OBJECT IDENTIFIER .micom-oscar.1.1.4 |
mcmSysChassisNumberOfModulesNAME = ;
DESC = Chassis style: number of modules.;
NOTE : this object was previously named \
mcmSysChassisNumberOfSlots.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;ro Enumeration .micom-oscar.1.1.4.1 |
mcmSysChassisCoolingFanNAME = ;
DESC =Chassis cooling fan status.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;ro Enumeration .micom-oscar.1.1.4.2 |
mcmSysChassisPowerSupplyTypeNAME = ;
DESC = Specifies the type of power supply \
based on type of voltage;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;ro Enumeration .micom-oscar.1.1.4.3 |
mcmSysChassisPowerSupplyStatusNAME = ;
DESC = Fault indicates that at least one \
power supply module is down;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;ro Enumeration .micom-oscar.1.1.4.4 |
mcmSysChassisPowerSupplyModuleCountNAME = ;
DESC = Specifies the number of power \
supply modules installed;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;ro INTEGER .micom-oscar.1.1.4.5 |
mcmSysChassisPowerSupplyRedundantNAME = ;
DESC = Indicates whether there are \
redundant power supply modules;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;ro Enumeration .micom-oscar.1.1.4.6 |
mcmSysTimeOfDayGroup OBJECT IDENTIFIER .micom-oscar.1.1.5 |
mcmSysTimeOfDay OBJECT IDENTIFIER .micom-oscar.1.1.5.1 |
mcmSysTimeOfDaySecNAME = ;
DESC = System Time of day in seconds.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;rw INTEGER .micom-oscar.1.1.5.1.1 |
mcmSysTimeOfDayMinNAME = ;
DESC = System Time of day in minutes.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;rw INTEGER .micom-oscar.1.1.5.1.2 |
mcmSysTimeOfDayHourNAME = ;
DESC = System Time of day in hours.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;rw INTEGER .micom-oscar.1.1.5.1.3 |
mcmSysTimeOfDayDayNAME = ;
DESC = System Time of day, the Day.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;rw Enumeration .micom-oscar.1.1.5.1.4 |
mcmSysTimeOfDayDateNAME = ;
DESC = System Time of day. The date.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;rw INTEGER .micom-oscar.1.1.5.1.5 |
mcmSysTimeOfDayMonthNAME = ;
DESC = System Time of day. The Month.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;rw INTEGER .micom-oscar.1.1.5.1.6 |
mcmSysTimeOfDayYearNAME = ;
DESC = System Time of day. The Year.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;rw INTEGER .micom-oscar.1.1.5.1.7 |
mcmSysAsciiTimeOfDayNAME = ;
DESC = This object will give the ascii version of \
the time of day. This would be the same time \
as reflected by all the other objects of \
this group put togther;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;ro DisplayString .micom-oscar.1.1.5.2 |
mcmSysFirmwareGroup OBJECT IDENTIFIER .micom-oscar.1.1.6 |
mcmSysOperationalTypeNAME = ;
DESC = Network Operational mode of this \
access device.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;rw Enumeration .micom-oscar.1.1.6.1 |
mcmSysFirmwareConfigCommitBankNAME = ;
DESC = The Default Confi. Image (global).;
HELP = Committed Config. Image Bank.;
CAPABILITIES = NET_CFG, VPN_DISP;rw Enumeration .micom-oscar.1.1.6.2 |
mcmSysFirmwareConfigSaveBankNAME = ;
DESC = Default Software Image Bank.;
HELP = Committed Code Image (global).;
CAPABILITIES = NET_CFG, VPN_DISP;rw Enumeration .micom-oscar.1.1.6.3 |
mcmSysFirmwareConfigActiveBankNAME = ;
DESC = The active Configuration Image Bank.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;rw Enumeration .micom-oscar.1.1.6.4 |
mcmSysFirmwareConfigReadBankNAME = ;
DESC = The Bank that the Configuration Read from.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;ro Enumeration .micom-oscar.1.1.6.5 |
mcmSysFirmwareCodeReadBankNAME = ;
DESC =The Bank that the Code Read from.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;ro Enumeration .micom-oscar.1.1.6.6 |
mcmSysFirmwareCodeCommitBankNAME = ;
DESC =The Bank that the Code is committed from.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;rw Enumeration .micom-oscar.1.1.6.7 |
mcmSysFirmwareVersionNAME = ;
DESC = The Code Version that this access \
device is running on.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;ro DisplayString .micom-oscar.1.1.6.8 |
mcmSysFirmwareConfigVersionNAME = ;
DESC = The Configuration Version that this \
access device is running on.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;ro DisplayString .micom-oscar.1.1.6.9 |
mcmSysFirmwareImageTableNAME = ;
DESC = The Firmware Image Table contains \
information about the Code Image.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP; SEQUENCE OF McmSysFirmwareImageEntry .micom-oscar.1.1.7 |
mcmSysFirmwareImageEntryNAME = ;
DESC = The entry that pertains to Code Image.;
HELP = ;
CAPABILITIES = ; McmSysFirmwareImageEntry .micom-oscar.1.1.7.1 |
mcmSysFirmwareImageIndexNAME = ;
DESC = The Index value for a specific Image.;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.1.1.7.1.1 |
mcmSysFirmwareImageBankNAME = ;
DESC = The Specific ImageBank that holds the Code \
Image or Config Image.;
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.1.1.7.1.2 |
mcmSysFirmwareImageSoftwareNAME = ;
DESC = This indicates that the specific Software \
is a boot Code, Image Code or a Config Code.;
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.1.1.7.1.3 |
mcmSysFirmwareImageFilenameNAME = ;
DESC =This indicates the File name of the Firmware.;
HELP = ;
CAPABILITIES = ;ro DisplayString .micom-oscar.1.1.7.1.4 |
mcmSysFirmwareImageRevisionNAME = ;
DESC = This indicates the Revision level of the \
specific Firmware.;
HELP = ;
CAPABILITIES = ;ro DisplayString .micom-oscar.1.1.7.1.5 |
mcmSysFirmwareImageSizeNAME = ;
DESC = This indicates the size of the Firmware in bytes.;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.1.1.7.1.6 |
mcmSysFirmwareImageCommitStatusNAME = ;
DESC = This indicates the Firmware Image Commit Status.;
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.1.1.7.1.7 |
mcmSysFirmwareImageBurnCountNAME = ;
DESC = This indicates the global burn count.;
HELP = ;
CAPABILITIES = ;ro Counter .micom-oscar.1.1.7.1.8 |
mcmSysSmartCfgGroup OBJECT IDENTIFIER .micom-oscar.1.1.8 |
mcmSysSmartCfgActionNAME = ;
DESC = Directs system to update secondary (Flash) storage \
by saving present configuration. Or directs discard \
of present re-configures.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;rw Enumeration .micom-oscar.1.1.8.1 |
mcmSysSmartCfgStatusNAME = ;
DESC = Indicates if system is currently being \
re-configured.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;ro Enumeration .micom-oscar.1.1.8.2 |
mcmSysCommunityStringTableNAME = ;
DESC = The System Community String Table.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_NONE; SEQUENCE OF McmSysCommunityStringEntry .micom-oscar.1.1.9 |
mcmSysCommunityStringEntryNAME = ;
DESC = Entry that pertains to the Community \
string.;
HELP = ;
CAPABILITIES = ; McmSysCommunityStringEntry .micom-oscar.1.1.9.1 |
mcmSysCommunityStringIndexNAME = ;
DESC = The Index value for each Community Strings.;
HELP = ;
CAPABILITIES = ;rw Enumeration .micom-oscar.1.1.9.1.1 |
mcmSysCommunityStringCommunityNAME = ;
DESC = Community String used as access password.;
HELP = ;
CAPABILITIES = ;rw DisplayString .micom-oscar.1.1.9.1.2 |
mcmSysValidateCommunityGroup OBJECT IDENTIFIER .micom-oscar.1.1.10 |
mcmSysValidateCommunityNAME = ;
DESC = This parameter contains the password \
obtained by the command line user interface.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;rw DisplayString .micom-oscar.1.1.10.1 |
mcmSysLastCommunityPriviledgeLevelNAME = ;
DESC = This parameter contains the priviledge \
level from the last valid password.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;ro Enumeration .micom-oscar.1.1.10.2 |
mcmSysConsolePortGroup OBJECT IDENTIFIER .micom-oscar.1.1.11 |
mcmSysConsolePortBaudRateNAME = ;
DESC = Set Console (and Debugger) Speed;
HELP = Set Console Speed;
CAPABILITIES = NET_CFG, VPN_DISP;rw Enumeration .micom-oscar.1.1.11.1 |
mcmSysConsolePortStopBitsNAME = ;
DESC = Set Console number of stop bits;
HELP = Set Console number of stop bits;
CAPABILITIES = NET_CFG, VPN_DISP;rw INTEGER .micom-oscar.1.1.11.2 |
mcmSysConsolePortDataBitsNAME = ;
DESC = Set Console number of Data bits (excluding start, \
stop and parity bits);
HELP = Set Console number of Data bits (excluding start, \
stop and parity bits);
CAPABILITIES = NET_CFG, VPN_DISP;rw INTEGER .micom-oscar.1.1.11.3 |
mcmSysConsolePortParityNAME = ;
DESC = Set Console parity bit;
HELP = Set Console parity bit;
CAPABILITIES = NET_CFG, VPN_DISP;rw Enumeration .micom-oscar.1.1.11.4 |
mcmSysCommitTrackingGroup OBJECT IDENTIFIER .micom-oscar.1.1.12 |
mcmSysCommitTrackingCounterNAME = ;
DESC = The Counter that pertains to the Commit Tracking.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_NONE;ro Counter .micom-oscar.1.1.12.1 |
mcmSysCommitTrackingSrcIPAddressOfLastCommitNAME = ;
DESC = The IP address of the SNMP manager that issued \
the last successful SET operation.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_NONE;ro IpAddress .micom-oscar.1.1.12.2 |
mcmSysCommitTrackingCommunityOfLastCommitNAME = ;
DESC = The community of the last successful SET.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_NONE;ro DisplayString (SNMPv2-TC) .micom-oscar.1.1.12.3 |
mcmSysCommitTrackingTimeOfLastCommitNAME = ;
DESC = The system uptime in ticks when the last \
SET was serviced.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_NONE;ro TimeTicks (SNMPv2-SMI) .micom-oscar.1.1.12.4 |
mcmSysIfExtTableNAME = ;
DESC = The Interface table that contains \
information about IfExtension in this \
access device.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP; SEQUENCE OF McmSysIfExtEntry .micom-oscar.1.1.13 |
mcmSysIfExtEntryNAME = ;
DESC = The specific Entry that pertains to \
IfExt in this access device.;
HELP = ;
CAPABILITIES = ; McmSysIfExtEntry .micom-oscar.1.1.13.1 |
mcmSysIfExtIfIndexNAME = ;
DESC = The Index value of the specifc entry.;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.1.1.13.1.1 |
mcmSysIfExtNameNAME = ;
DESC = The Name of the specific IfExt entry.;
HELP = ;
CAPABILITIES = ;ro DisplayString .micom-oscar.1.1.13.1.2 |
mcmSysIfExtTypeNAME = ;
DESC = The values of this field are kept \
the same as the values for the \
ifExtType defined in \
the extension to MIB II (RFC1573);
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.1.1.13.1.3 |
mcmSysIfExtLinkUpDownTrapEnableNAME = ;
DESC = This indicates if the LinkUpDownTrap \
is enabled or not.;
HELP = ;
CAPABILITIES = ;rw Enumeration .micom-oscar.1.1.13.1.4 |
mcmSysIfExtConnectorPresentNAME = ;
DESC = This indicates if the IfExt entry \
has a phisical connector present.;
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.1.1.13.1.5 |
mcmSysIfExtPersistenceTypeNAME = ;
DESC = This indicates if the Persistence Type \
is volatile or non-volatile.;
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.1.1.13.1.6 |
mcmSysIfExtStateNAME = ;
DESC = This indicates that if the IfExt entry \
is configured or not.;
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.1.1.13.1.7 |
mcmSysIfExtPPANAME = ;
DESC = The PPA of the port;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.1.1.13.1.8 |
mcmSysIfExtModuleNAME = ;
DESC = The logical interface module address \
of this interface \
NOTE : this object was previously named \
mcmSysIfExtSlot.;
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.1.1.13.1.9 |
mcmSysIfExtChannelNAME = ;
DESC = The channel number of this interface... \
FR DCE: N/A, WAN Driver: SCC number, \
WAN Connector: corresponding SCC number;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.1.1.13.1.10 |
mcmSysIfExtPPADeviceTypeNAME = ;
DESC = The PPA device type of this interface.;
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.1.1.13.1.11 |
mcmSysRollbackGroup OBJECT IDENTIFIER .micom-oscar.1.1.14 |
mcmSysRollbackFeatureNAME = ;
DESC = This indicates if the RollBack feature is \
enabled or disabled.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;rw Enumeration .micom-oscar.1.1.14.1 |
mcmSysRollbackStatusNAME = ;
DESC = This indicates whether Confirm system \
Rollback is required or not. Or will \
Confirm at the next reset.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;ro Enumeration .micom-oscar.1.1.14.2 |
mcmSysRollbackConfirmNAME = ;
DESC = This confirms that previous System Configuration \
or Code bank changes are accepted and that the \
System is NOT to timeout, reset and go back to
previous Config or Code bank.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;rw Enumeration .micom-oscar.1.1.14.3 |
nvmSysIfExtTableNAME = ;
DESC = The Interface table that contains \
information about IfExtension in this \
access device.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP; SEQUENCE OF NvmSysIfExtEntry .micom-oscar.1.1.15 |
nvmSysIfExtEntryNAME = ;
DESC = The specific Entry that pertains to \
IfExt in this access device.;
HELP = ;
CAPABILITIES = ; NvmSysIfExtEntry .micom-oscar.1.1.15.1 |
nvmSysIfExtIfIndexNAME = ;
DESC = The Index value of the specifc entry.;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.1.1.15.1.1 |
nvmSysIfExtNameNAME = ;
DESC = The Name of the specific IfExt entry.;
HELP = ;
CAPABILITIES = ;ro DisplayString .micom-oscar.1.1.15.1.2 |
nvmSysIfExtTypeNAME = ;
DESC = The values of this field are kept \
the same as the values for the \
ifExtType defined in \
the extension to MIB II (RFC1573);
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.1.1.15.1.3 |
nvmSysIfExtLinkUpDownTrapEnableNAME = ;
DESC = This indicates if the LinkUpDownTrap \
is enabled or not.;
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.1.1.15.1.4 |
nvmSysIfExtConnectorPresentNAME = ;
DESC = This indicates if the IfExt entry \
has a phisical connector present.;
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.1.1.15.1.5 |
nvmSysIfExtPersistenceTypeNAME = ;
DESC = This indicates if the Persistence Type \
is volatile or non-volatile.;
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.1.1.15.1.6 |
nvmSysIfExtStateNAME = ;
DESC = This indicates that if the IfExt entry \
is configured or not.;
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.1.1.15.1.7 |
nvmSysIfExtPPANAME = ;
DESC = The PPA of the port;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.1.1.15.1.8 |
nvmSysIfExtModuleNAME = ;
DESC = The logical interface module address \
of this interface \
NOTE : this object was previously named \
nvmSysIfExtSlot.;
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.1.1.15.1.9 |
nvmSysIfExtChannelNAME = ;
DESC = The channel number of this interface... \
FR DCE: N/A, WAN Driver: SCC number, \
WAN Connector: corresponding SCC number;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.1.1.15.1.10 |
nvmSysIfExtPPADeviceTypeNAME = ;
DESC = The PPA device type of this interface.;
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.1.1.15.1.11 |
mcmSysPhysTableNAME = ;
DESC = Table to map physical cards to \
Logical Interface Modules (LIM) on \
the access device
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP; SEQUENCE OF McmSysPhysEntry .micom-oscar.1.1.16 |
mcmSysPhysEntryNAME = ;
DESC = Entry pertaining to a specific physical module.;
HELP = ;
CAPABILITIES = ; McmSysPhysEntry .micom-oscar.1.1.16.1 |
mcmSysPhysModuleAddressNAME = ;
DESC = The value of this object identifies \
the physical slot address of the module \
within the unit;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.1.1.16.1.1 |
mcmSysLogModuleAddressNAME = ;
DESC = The value of this object identifies \
the logical interface module (lim) address;
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.1.1.16.1.2 |
sys-control OBJECT IDENTIFIER .micom-oscar.1.2 |
mcmSysResetGroup OBJECT IDENTIFIER .micom-oscar.1.2.1 |
mcmSysResetActionNAME = ;
DESC = Reset Unit, restart the CPU only, warm start \
or factory default (cold start).;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;rw Enumeration .micom-oscar.1.2.1.1 |
mcmSysRestartReasonNAME = ;
DESC = Reset Restart Reason Codes;
HELP = Reason Code for last Reset;
CAPABILITIES = NET_CFG, VPN_DISP;ro Enumeration .micom-oscar.1.2.1.2 |
mcmSysTimeOfLastResetNAME = ;
DESC = This object will indicate the time of \
when the access device was last reset.
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;ro DisplayString .micom-oscar.1.2.1.3 |
mcmSysCfgLockGroup OBJECT IDENTIFIER .micom-oscar.1.2.2 |
mcmSysCfgLockNAME = ;
DESC = Indicates if system config is locked.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;rw DisplayString .micom-oscar.1.2.2.1 |
sys-statistics OBJECT IDENTIFIER .micom-oscar.1.3 |
mcmSysUtilGroup OBJECT IDENTIFIER .micom-oscar.1.3.1 |
mcmSysCpuUtilizationNAME = ;
DESC = Indicates the CPU utilization in percent.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;ro Gauge .micom-oscar.1.3.1.1 |
mcmSysLinkTransmitBandwidthUtilizationNAME = ;
DESC = Indicates the Bandwidth Utilization in percent.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;ro Gauge .micom-oscar.1.3.1.2 |
mcmSysInternalRAMUtilizationNAME = ;
DESC = Indicates internal RAM Utilization in percent.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;ro Gauge .micom-oscar.1.3.1.3 |
mcmSysLinkReceiveBandwidthUtilizationNAME = ;
DESC = Indicates the Link Receive Bandwidth utilization.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;ro Gauge .micom-oscar.1.3.1.4 |
sys-trap OBJECT IDENTIFIER .micom-oscar.1.4 |
mcmSysTrapSubscriptionTableNAME = ;
DESC = This Table displays the System Trap \
subscription information of this \
access device.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP; SEQUENCE OF McmSysTrapSubscriptionEntry .micom-oscar.1.4.1 |
mcmSysTrapSubscriptionEntryNAME = ;
DESC = Entry that pertains to a specific TRAP.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP; McmSysTrapSubscriptionEntry .micom-oscar.1.4.1.1 |
mcmSysTrapSubscriptionIPAddressNAME = ;
DESC = IP address of the SNMP Manager subscribing Traps.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;rw IpAddress .micom-oscar.1.4.1.1.1 |
mcmSysTrapSubscriptionCommunityStringNAME = ;
DESC = Community string for this subscriber.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;rw DisplayString (SNMPv2-TC) .micom-oscar.1.4.1.1.2 |
mcmSysTrapSubscriptionActionNAME = ;
DESC = Action to take: add or delete subscriber.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;rw Enumeration .micom-oscar.1.4.1.1.3 |
mcmSysTrapThresholdGroup OBJECT IDENTIFIER .micom-oscar.1.4.2 |
mcmSysTrapCPUUtilThresholdNAME = ;
DESC = Indicates the configured threshold for \
CPU Utilization.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;rw INTEGER .micom-oscar.1.4.2.1 |
mcmSysTrapBandwidthUtilThresholdNAME = ;
DESC = Indicates the configured threshold for \
bandwidth utilization.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;rw INTEGER .micom-oscar.1.4.2.2 |
mcmSysTrapRAMUtilThresholdNAME = ;
DESC = Indicates the configured threshold for \
RAM utilization.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;rw INTEGER .micom-oscar.1.4.2.3 |