MICOM-GCM-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for MICOM-GCM-MIB.
134
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
134 total| Object Name |
|---|
micom-gcm OBJECT IDENTIFIER .micom-oscar.25 |
IMPORTS Unknown .micom-oscar.25 |
mcmGCMPriLinkDownCausedByPhysicalConnectionNAME = ;
DESC = This trap will be generated from the GCM,\
if a GCM Link changes the state from UP to \
DOWN. The GCM Link is configured as primary \
link. The disconnection is caused by the loss\
of the physical connection.\
Severity Level: CRITICAL ;
HELP = Loss of primary link Physical conenction. Check \
the cabling. Possible signalling problem with ISDN \
D-channel, or Frame Relay protocol error.\
If problem persists, please contact Sys Admin., or \
Field Personnel.; TRAP-TYPE .micom-oscar.25.0.1 |
mcmGCMPriLinkDownCausedByProtocolFailureNAME = ;
DESC = This trap will be generated from the GCM,\
if a GCM Link changes the state from UP to \
DOWN. The GCM Link is configured as primary \
link. The disconnection is caused by the loss\
of the protocol connection.\
Severity Level: CRITICAL ;
HELP = Possible Frame Relay Protocol error. If problem \
persist, contact System admin. or Field Personnel.; TRAP-TYPE .micom-oscar.25.0.2 |
mcmGcmPriLinkDownCausedByGcmTimerEventNAME = ;
DESC = This trap will be generated from the GCM,\
if a GCM Link changes the state from UP to \
DOWN. The GCM Link is configured as primary \
link. The disconnection is caused by a \
GCM Timer event.\
Severity Level: CRITICAL ;
HELP = GCM Timer event (user activated) caused the Link \
to go down.
Please wait until the timer kicks in. If it \
stays down, contact your Field Personnel.; TRAP-TYPE .micom-oscar.25.0.3 |
mcmGcmPriLinkDownCausedByUnknownSourceNAME = ;
DESC = This trap will be generated from the GCM,\
if a GCM Link changes the state from UP to \
DOWN. The GCM Link is configured as primary \
link. The disconnection is caused by the loss\
of an unkown event.\
Severity Level: CRITICAL ;
HELP = Caused by unknown event . If Link does not come \
back up, Please consult Field Personnel.; TRAP-TYPE .micom-oscar.25.0.4 |
mcmGCMBakLinkDownCausedByPhysicalConnectionNAME = ;
DESC = This trap will be generated from the GCM,\
if a GCM Link changes the state from UP to \
DOWN. The GCM Link is configured as backup \
link. The disconnection is caused by the loss\
of the physical connection.\
Severity Level: CRITICAL ;
HELP = Loss of Backup link Physical conenction. Check \
the cabling. Possible signalling problem with ISDN \
D-channel, or Frame Relay protocol error.\
If problem persists, please contact Sys Admin., or \
Field Personnel.; TRAP-TYPE .micom-oscar.25.0.5 |
mcmGCMBakLinkDownCausedByProtocolFailureNAME = ;
DESC = This trap will be generated from the GCM,\
if a GCM Link changes the state from UP to \
DOWN. The GCM Link is configured as backup \
link. The disconnection is caused by the loss\
of the protocol connection.\
Severity Level: CRITICAL ;
HELP = Possible Frame Relay Protocol error. If problem \
persist, contact System admin. or Field Personnel.; TRAP-TYPE .micom-oscar.25.0.6 |
mcmGcmBakLinkDownCausedByGcmTimerEventNAME = ;
DESC = This trap will be generated from the GCM,\
if a GCM Link changes the state from UP to \
DOWN. The GCM Link is configured as backup \
link. The disconnection is caused by GCM \
timer event. \
Severity Level: CRITICAL ;
HELP = GCM Timer event (user activated) caused the Link \
to go down.
Please wait until the timer kicks in. If it \
stays down, contact your Field Personnel.; TRAP-TYPE .micom-oscar.25.0.7 |
mcmGcmBakLinkDownCausedByUnknownSourceNAME = ;
DESC = This trap will be generated from the GCM,\
if a GCM Link changes the state from UP to \
DOWN. The GCM Link is configured as backup \
link. The disconnection is caused by the loss\
of an unkown event. \
Severity Level: CRITICAL ;
HELP = Caused by unknown event . If Link does not come \
back up, Please contact Field Personnel.; TRAP-TYPE .micom-oscar.25.0.8 |
mcmGcmPriLinkEstNAME = ServerUnreachable;
DESC = The connection between the access device and the PP is \
established. The connection is is build on physical \
and protocol level. Voice and Lan transfer is disabled \
for the primary link.\
Severity Level: INFORMATIVE ;
HELP = Normal physical and protocol level connection. But, \
Server is unreachable. Please check Server's status.; TRAP-TYPE .micom-oscar.25.0.9 |
mcmGcmBakLinkEstNAME = ServerUnreachable;
DESC = The connection between the access device and the PP is \
established. The connection is is build on physical \
and protocol level. Voice and Lan transferis disabled \
for the backup link.;\
Severity Level: INFORMATIVE ;
HELP = Normal physical and protocol level connection. But, \
Server is unreachable. Please check Server's status.; TRAP-TYPE .micom-oscar.25.0.10 |
mcmGcmPriLinkUpNAME = ;
DESC = This trap indicates that the connection is established \
and voice and LAN transfer is now actviated for the \
primary link.\
Severity Level: INFORMATIVE ;
HELP = Normal Status Indicator!.; TRAP-TYPE .micom-oscar.25.0.11 |
mcmGcmBakLinkUpNAME = ;
DESC = This trap indicates that the connection is established \
and voice and LAN transfer is now actviated for the \
backup link.\
Severity Level: INFORMATIVE ;
HELP = Normal Status Indicator!.; TRAP-TYPE .micom-oscar.25.0.12 |
mcmGcmRegionalLinkEstNAME = ;
DESC = This trap indicates that the connection is established \
for the regional GCM link. \
Severity Level: INFORMATIVE ;
HELP = Normal Status Indicator!.; TRAP-TYPE .micom-oscar.25.0.13 |
mcmGcmRegionalLinkDownNAME = ;
DESC = This trap indicates that the connection is deactivated \
for the regional GCM link because of a primary link \
failure or the disconnection by the remote peer. \
Severity Level: INFORMATIVE ;
HELP = Normal Status Indicator!.; TRAP-TYPE .micom-oscar.25.0.14 |
configuration OBJECT IDENTIFIER .micom-oscar.25.1 |
mcmGcmGlobalCfgGroup OBJECT IDENTIFIER .micom-oscar.25.1.1 |
mcmGcmGlobalCfgAdminStatusNAME = ;
DESC = The GCM admin status: \
1 - GCM is enabled. \
2 - GCM is disabled. \
(Operational);
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP ;ro Enumeration .micom-oscar.25.1.1.1 |
mcmGcmGlobalCfgTrapsNAME = ;
DESC = This object indicates whether GCM traps will \
be generated or not. (Operational);
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP ;ro Enumeration .micom-oscar.25.1.1.2 |
mcmGcmGlobalCfgAutoActSelModeNAME = ;
DESC = This object is used to set the mode of the unit \
activation after reading the configuration file. \
disabled (2): The GCM does not change the objects \
mcmGcmUnitAdminStatus in the GCM Unit \
table after reading the configuration file. \
hwCfgAutoSelect (1): After reading the configuration \
file, the GCM activates only one of the three GCM \
Units depending on the hardware configuration. \
The stored configuration for the object \
mcmGcmUnitAdminStatus will be ignored. \
The following association between the GCM Unit \
rows and hardware configuration exists: \
Row 1: Port 2 and (optional) 3 with Serial WAN \
card; Port 2 is the Primary port. \
Row 2: Port 2 with Serial WAN card, Port 3 with \
ISDN card, Port 2 is the Primary port. \
Row 3: Port 2 and (optional) 3 with ISDN, Port 2 \
is the Primary port. \
(Operational);
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP ;ro Enumeration .micom-oscar.25.1.1.3 |
mcmGcmLinkTableNAME = ;
DESC = The GCM Link Table. (Operational) ;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP ; SEQUENCE OF McmGcmLinkEntry .micom-oscar.25.1.2 |
mcmGcmLinkEntryNAME = ;
DESC = An entry in the GCM Link Table. \
(Operational) ;
HELP = ;
CAPABILITIES = ; McmGcmLinkEntry .micom-oscar.25.1.2.1 |
mcmGcmLinkIndexNAME = ;
DESC = The index value which uniquely identifies an \
entry in the GCM Link Table. (Operational);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.25.1.2.1.1 |
mcmGcmLinkUnitIndexNAME = ;
DESC = The index value that uniquely identifies an \
entry in the GCM Unit Table. (Operational);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.25.1.2.1.2 |
mcmGcmLinkNameNAME = ;
DESC = The name of the GCM Link. Default value is \
'gcmLink<mcmGcmLinkIndex>'. (Operational);
HELP = ;
CAPABILITIES = ;ro DisplayString .micom-oscar.25.1.2.1.3 |
mcmGcmLinkSigTypeNAME = ;
DESC = The type of the signaling channel, if a signaling \
protocol is used. (Operational);
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.25.1.2.1.4 |
mcmGcmLinkSigPcmIndexNAME = ;
DESC = The index value that uniquely identifies an entry \
for the PCM. In the case of the ICM, this entry \
represents an index for the dialCtlPeerCfgTable. \
(Operational);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.25.1.2.1.5 |
mcmGcmLinkSigOperStatusNAME = ;
DESC = The status of the Signaling Link: \
cfg-error (1): Configuration error. The signaling \
link is not configured or activated from the \
Signaling CM. \
info-wait (2): the GCM has sent an information \
request message to the Signaling CM to request \
the status of this link. If the GCM receives an error \
message, the status will be set to cfg-error (1). \
inactive (3): the link is inactive. \
enable-wait (4): the GCM is trying to enable the \
hardware interface and is waiting for the response \
from the Signaling CM. \
deferred(5):the activation of link is being deferred \
for 1 minute.
protocol-down(6):this indicates PLM or MSM is down.\
activating (7): the activation of this link is in \
progress. \
active (8): the Signaling link is established. \
disconnecting (9): the Signaling CM deactivates \
this link. \
up (10): this link is up forever.;
(Operational);
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.25.1.2.1.6 |
mcmGcmLinkProtoTypeNAME = ;
DESC = The type of the protocol. (Operational);
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.25.1.2.1.7 |
mcmGcmLinkProtoPcmIndexNAME = ;
DESC = The index value that uniquely identifies an entry \
for the PCM. In the case of the FRCM, this entry \
represents an index for the port. \
(Operational);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.25.1.2.1.8 |
mcmGcmLinkProtoStatusNAME = ;
DESC = The status of the Protocol Link: \
cfg-error (1): Configuration error. The protocol \
link is not configured or activated from the CM. \
info-wait (2): the GCM has sent an information \
request message to the CM to request the status \
of this link. If the GCM receives an error message, \
the status will be set to cfg-error (1). \
inactive (3): the link is inactive. \
enable-wait (4): the GCM is trying to enable the \
hardware interface and is waiting for the response \
from the CM. \
deferred(5):the activation of link is being deferred for 1 \
minute. \
protocol-down(6):this indicates PLM or MSM is down.\
activating (7): the activation of this link is in progress. \
wait-switch (8): the switching from the backup link \
to the primary is delayed by the configuration. \
switching (9): the switching of the link is in progress. \
active (10): the link is established. \
disconnecting (11): the CM deactivates this link. \
up (12): this link is up forever. \
(Operational);
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.25.1.2.1.9 |
mcmGcmLinkVoiceCallsNAME = ;
DESC = The number of active voice calls. (Operational);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.25.1.2.1.10 |
mcmGcmUnitTableNAME = ;
DESC = The GCM Unit Table. (Operational) ;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP ; SEQUENCE OF McmGcmUnitEntry .micom-oscar.25.1.3 |
mcmGcmUnitEntryNAME = ;
DESC = An entry in the GCM Unit Table. \
(Operational) ;
HELP = ;
CAPABILITIES = ; McmGcmUnitEntry .micom-oscar.25.1.3.1 |
mcmGcmUnitIndexNAME = ;
DESC = The index value which uniquely identifies an \
entry in the GCM Unit Table. (Operational);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.25.1.3.1.1 |
mcmGcmUnitNameNAME = ;
DESC = The name of the GCM Unit. Default value is \
'gcmUnit <mcmGcmUnitIndex>'. (Operational);
HELP = ;
CAPABILITIES = ;ro DisplayString .micom-oscar.25.1.3.1.2 |
mcmGcmUnitAdminStatusNAME = ;
DESC = The value shows the administration status of \
the GCM Unit. If the status is set to down (1), \
the administration is disabled for this unit and \
all associated links. Only when the status is \
up (2), the GCM controls and administrates this \
unit. (Operational);
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.25.1.3.1.3 |
mcmGcmUnitTimerAdminStatusNAME = ;
DESC = The GCM Unit timer status. When set to enabled (1), \
the GCM checks the configured timer entries. \
(Operational);
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.25.1.3.1.4 |
mcmGcmUnitSwitchTypeNAME = ;
DESC = The type of the switching algorithm. \
fast-switch (1): the GCM deactivates the backup \
link after the primary link is re-established \
regardless of the backup transmission activity. \
voice-switch (2): the backup link will be deactivated \
after the primary link is re-established and all voice \
calls over the backup link are disconnected. \
manual-switch-backup(3): the GCM switches to the \
backup in case of the primary failure. The switching \
back to the primary port mst be done manually.\
manual-switch(4): the GCM could be manually switch \
only.\
(Operational);
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.25.1.3.1.5 |
mcmGcmUnitSwitchDelayNAME = ;
DESC = NOTE THAT THIS OBJECT IS DEPRECATED. It's \
functionality has been replaced by \
mcmGcmUnitBackupSwitchDelay object. \
The number of minutes that the switching from \
the active backup link to the active primary link \
has to be delayed. (Operational);
HELP = ;
CAPABILITIES = ;rodeprecated INTEGER .micom-oscar.25.1.3.1.6 |
mcmGcmUnitPrimaryLinkIndexNAME = ;
DESC = The index value that uniquely identifies an entry \
in the GCM Link Table as the primary link. \
(Operational);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.25.1.3.1.7 |
mcmGcmUnitBackupRemainTimeNAME = ;
DESC = The maximum number of minutes that the backup link \
remains active after the switching from the backup \
to the primary. This object will be used if the \
object mcmGcmUnitSwitchType is set to \
voice-switch (2). (Operational);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.25.1.3.1.8 |
mcmGcmUnitBackupSwitchDelayNAME = ;
DESC = The number of minutes the switching \
has to be delayed before switching \
to the primary link.(Operational);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.25.1.3.1.9 |
mcmGcmUnitPrimarySwitchDelayNAME = ;
DESC = The number of minutes the switching has \
to be delayed before switching to the \
backup link. (Operational);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.25.1.3.1.10 |
mcmGcmUnitRegionalLinkIndexNAME = ;
DESC = The index value that uniquely identifies an entry \
in the GCM Link Table as the regional link index. \
This GCM link is activated only during the down \
time of the backup link.
(Operational);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.25.1.3.1.11 |
mcmGcmUnitModeCfgNAME = ;
DESC = branch-node(1): The GCM will try to \
to activate at first the primary \
link. In the case of a failure, \
the GCM will activate one of the \
the backup links. During the time \
the primary link is active, the \
backup port is deactivated.
regional-node(2): This mode is \
identical to the branch-mode(1) \
except the backup link is not used.\
When the primary link is active, the \
GCM will not deactivate the backup \
port. If the backup port is an \
ISDN card, the GCM can be configured \
to allow incoming calls by using the \
link specified by the object \
<gcmUnitRegionalLinkIndex>. When the
primary link fails, the activated \
link <gcmUnitRegionalLinkIndex> \
(eg. configured for incoming connection \
ISDN) will be disconnected and the \
backup link will be activated. \
Note that there is no deactivation \
of the backup port and ISDN incomming \
calls can be accepted when the backup \
is not used for backing up the primary \
connection.\
central-site-node(3):Will not have a
MPANL DTE connection. There is no \
need to have the backup functionality. \
The GCM will enable both ports. \
In the case of ISDN, it is possible \
to accept incomming calls. Primary link \
and backup link will have the same \
priority, there is no correlation \
between them. The GCM will activate \
all GCM links configured for this unit.
(Operational);
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.25.1.3.1.12 |
mcmGcmUnitPriLinkFailMonStatusNAME = ;
DESC = The GCM link failure monitor \
status. \
(Operational);
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.25.1.3.1.13 |
mcmGcmUnitPriLinkFailMonDurMinNAME = ;
DESC = The number of minutes to monitor \
gcmLinkFailureMonitorThreshold(below)\
activity. The duration timer \
starts when first link failure \
occured while the \
gcmLinkFailureMonStatus(above) is \
enabled(1). \
(Operational);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.25.1.3.1.14 |
mcmGcmUnitPriLinkFailMonThrshldNAME = ;
DESC = The maximum number of \
gcmLinkFailureMonCount(below) \
within gcmLinkFailureMonDurMin \
(above)before switching from primary \
to backup.\
(Operational);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.25.1.3.1.15 |
mcmGcmUnitPriLinkFailMonCountNAME = ;
DESC = The number of link failures within \
gcmLinkFailureMonitorDurMin(above). \
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.25.1.3.1.16 |
mcmGcmUnitCmdNAME = ;
DESC = Switches the units link from primary to \
backup (1) or backup to primary (2) \
HELP = ;
CAPABILITIES = ;rw Enumeration .micom-oscar.25.1.3.1.17 |
mcmGcmBackupCfgTableNAME = ;
DESC = The GCM Backup Configuration Table. \
(Operational) ;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP ; SEQUENCE OF McmGcmBackupCfgEntry .micom-oscar.25.1.4 |
mcmGcmBackupCfgEntryNAME = ;
DESC = An entry in the GCM Backup Configuration \
Table. (Operational) ;
HELP = ;
CAPABILITIES = ; McmGcmBackupCfgEntry .micom-oscar.25.1.4.1 |
mcmGcmBackupCfgIndexNAME = ;
DESC = The index value which uniquely identifies an \
entry in the GCM Backup Configuration Table. \
(Operational);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.25.1.4.1.1 |
mcmGcmBackupCfgUnitIndexNAME = ;
DESC = The index value that uniquely identifies an \
entry in the GCM Unit Table. (Operational);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.25.1.4.1.2 |
mcmGcmBackupCfgLinkIndexNAME = ;
DESC = The index value that uniquely identifies an \
entry in the GCM Link Table. This GCM Link \
will be used for Backup Link activation. \
(Operational);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.25.1.4.1.3 |
mcmGcmTimerTableNAME = ;
DESC = The GCM Timer Table. (Operational) ;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP ; SEQUENCE OF McmGcmTimerEntry .micom-oscar.25.1.5 |
mcmGcmTimerEntryNAME = ;
DESC = An entry in the GCM Timer Table. \
(Operational) ;
HELP = ;
CAPABILITIES = ; McmGcmTimerEntry .micom-oscar.25.1.5.1 |
mcmGcmTimerIndexNAME = ;
DESC = The index value which uniquely identifies an \
entry in the GCM Timer Table. (Operational);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.25.1.5.1.1 |
mcmGcmTimerUnitIndexNAME = ;
DESC = The index value that uniquely identifies an \
entry into the GCM Unit Table. (Operational);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.25.1.5.1.2 |
mcmGcmTimerInactStartHrNAME = ;
DESC = The hours designation to start inactivity. The \
connection will be automatically disconnected \
if the system time is equal to the \
mcmGcmTimerInactStartHr/Min. \
Similarly, if the Inactivity Timer is configured \
as a periodic timer (mcmGcmTimerInactPeriodic), \
this object designates the hour to start inactivity.\
(Operational);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.25.1.5.1.3 |
mcmGcmTimerInactStartMinNAME = ;
DESC = The minutes designation to start inactivity. The \
connection will be automatically disconnected \
if the system time is equal to the \
mcmGcmTimerInactStartHr/Min. \
If the Inactivity Timer is configured as a periodic \
timer (mcmGcmTimerInactPeriodic), this object \
designates the minute to start inactivity. \
(Operational);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.25.1.5.1.4 |
mcmGcmTimerInactDurationHrNAME = ;
DESC = The hours designation for inactivity duration. \
The inactivity time duration of the GCM Unit is \
defined by mcmGcmTimerInactDurationHr/Min. \
Similarly, if the Inactivity Timer is configured as \
a periodic timer (mcmGcmTimerInactPeriodic), \
this object designates the inactive connection \
duration (hours) period. (Operational);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.25.1.5.1.5 |
mcmGcmTimerInactDurationMinNAME = ;
DESC = The minutes designation for inactivity duration. \
The inactivity time duration of the GCM Unit is \
defined by mcmGcmTimerInactDurationHr/Min. \
Similarly, if the Inactivity Timer is configured as \
a periodic timer (mcmGcmTimerInactPeriodic), \
this object designates the inactive connection \
duration (minutes) period. (Operational);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.25.1.5.1.6 |
mcmGcmTimerInactMondayNAME = ;
DESC = Enables (1) or disables (2) the timer inactivity \
administration for the day Monday. \
(Operational);
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.25.1.5.1.7 |
mcmGcmTimerInactTuesdayNAME = ;
DESC = Enables (1) or disables (2) the timer inactivity \
administration for the day Tuesday. \
(Operational);
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.25.1.5.1.8 |
mcmGcmTimerInactWednesdayNAME = ;
DESC = Enables (1) or disables (2) the timer inactivity \
administration for the day Wednesday. \
(Operational);
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.25.1.5.1.9 |
mcmGcmTimerInactThursdayNAME = ;
DESC = Enables (1) or disables (2) the timer inactivity \
administration for the day Thursday. \
(Operational);
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.25.1.5.1.10 |
mcmGcmTimerInactFridayNAME = ;
DESC = Enables (1) or disables (2) the timer inactivity \
administration for the day Friday. \
(Operational);
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.25.1.5.1.11 |
mcmGcmTimerInactSaturdayNAME = ;
DESC = Enables (1) or disables (2) the timer inactivity \
administration for the day Saturday. \
(Operational);
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.25.1.5.1.12 |
mcmGcmTimerInactSundayNAME = ;
DESC = Enables (1) or disables (2) the timer inactivity \
administration for the day Sunday. \
(Operational);
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.25.1.5.1.13 |
mcmGcmTimerInactPeriodicNAME = ;
DESC = Enables (1) or disables (2) the Periodic Timer \
inactivity administration functionality. \
(Operational);
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.25.1.5.1.14 |
nvmGcmGlobalCfgGroup OBJECT IDENTIFIER .micom-oscar.25.1.6 |
nvmGcmGlobalCfgAdminStatusNAME = ;
DESC = The GCM admin status: \
1 - GCM is enabled. \
2 - GCM is disabled. \
(Configuration);
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP ;rw Enumeration .micom-oscar.25.1.6.1 |
nvmGcmGlobalCfgTrapsNAME = ;
DESC = This object indicates whether GCM traps will \
be generated or not. (Configuration);
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP ;rw Enumeration .micom-oscar.25.1.6.2 |
nvmGcmGlobalCfgAutoActSelModeNAME = ;
DESC = This object is used to set the mode of the unit \
activation after reading the configuration file. \
disabled (2): The GCM does not change the objects \
nvmGcmUnitAdminStatus in the GCM Unit \
table after reading the configuration file. \
hwCfgAutoSelect (1): After reading the configuration \
file, the GCM activates only one of the three GCM \
Units depending on the hardware configuration. \
The stored configuration for the object \
nvmGcmUnitAdminStatus will be ignored. \
The following association between the GCM Unit \
rows and hardware configuration exists: \
Row 1: Port 2 and (optional) 3 with Serial WAN \
card; Port 2 is the Primary port. \
Row 2: Port 2 with Serial WAN card, Port 3 with \
ISDN card, Port 2 is the Primary port. \
Row 3: Port 2 and (optional) 3 with ISDN, Port 2 \
is the Primary port. \
(Configuration);
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP ;rw Enumeration .micom-oscar.25.1.6.3 |
nvmGcmLinkTableNAME = ;
DESC = The GCM Link Table. (Configuration) ;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP ; SEQUENCE OF NvmGcmLinkEntry .micom-oscar.25.1.7 |
nvmGcmLinkEntryNAME = ;
DESC = An entry in the GCM Link Table. \
(Configuration) ;
HELP = ;
CAPABILITIES = ; NvmGcmLinkEntry .micom-oscar.25.1.7.1 |
nvmGcmLinkIndexNAME = ;
DESC = The index value which uniquely identifies an \
entry in the GCM Link Table. (Configuration);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.25.1.7.1.1 |
nvmGcmLinkUnitIndexNAME = ;
DESC = The index value that uniquely identifies an \
entry in the GCM Unit Table. (Configuration);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.25.1.7.1.2 |
nvmGcmLinkNameNAME = ;
DESC = The name of the GCM Link. Default value is \
'gcmLink<nvmGcmLinkIndex>'. (Configuration);
HELP = ;
CAPABILITIES = ;rw DisplayString .micom-oscar.25.1.7.1.3 |
nvmGcmLinkSigTypeNAME = ;
DESC = The type of the signaling channel, if a signaling \
protocol is used. (Configuration);
HELP = ;
CAPABILITIES = ;rw Enumeration .micom-oscar.25.1.7.1.4 |
nvmGcmLinkSigPcmIndexNAME = ;
DESC = The index value that uniquely identifies an entry \
for the PCM. In the case of the ICM, this entry \
represents an index for the dialCtlPeerCfgTable. \
(Configuration);
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.25.1.7.1.5 |
nvmGcmLinkProtoTypeNAME = ;
DESC = The type of the protocol. (Configuration);
HELP = ;
CAPABILITIES = ;rw Enumeration .micom-oscar.25.1.7.1.6 |
nvmGcmLinkProtoPcmIndexNAME = ;
DESC = The index value that uniquely identifies an entry \
for the PCM. In the case of the FRCM, this entry \
represents an index for a port. \
(Configuration);
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.25.1.7.1.7 |
nvmGcmLinkRowStatusNAME = ;
DESC = This object is used to create and delete rows in the \
GCM Link Table. (Configuration);
HELP = ;
CAPABILITIES = ;rw Enumeration .micom-oscar.25.1.7.1.8 |
nvmGcmUnitTableNAME = ;
DESC = The GCM Unit Table. (Configuration) ;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP ; SEQUENCE OF NvmGcmUnitEntry .micom-oscar.25.1.8 |
nvmGcmUnitEntryNAME = ;
DESC = An entry in the GCM Unit Table. \
(Configuration) ;
HELP = ;
CAPABILITIES = ; NvmGcmUnitEntry .micom-oscar.25.1.8.1 |
nvmGcmUnitIndexNAME = ;
DESC = The index value which uniquely identifies an \
entry in the GCM Unit Table. (Configuration);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.25.1.8.1.1 |
nvmGcmUnitNameNAME = ;
DESC = The name of the GCM Unit. Default value is \
'gcmUnit <nvmGcmUnitIndex>'. (Configuration);
HELP = ;
CAPABILITIES = ;rw DisplayString .micom-oscar.25.1.8.1.2 |
nvmGcmUnitAdminStatusNAME = ;
DESC = The value shows the administration status of \
the GCM Unit. If the status is set to down (1), \
the administration is disabled for this unit and \
all associated links. Only when the status is \
up (2), the GCM controls and administrates this \
unit. (Configuration);
HELP = ;
CAPABILITIES = ;rw Enumeration .micom-oscar.25.1.8.1.3 |
nvmGcmUnitTimerAdminStatusNAME = ;
DESC = The GCM Unit timer status. When set to enabled (1), \
the GCM checks the configured timer entries. \
(Configuration);
HELP = ;
CAPABILITIES = ;rw Enumeration .micom-oscar.25.1.8.1.4 |
nvmGcmUnitSwitchTypeNAME = ;
DESC = The type of the switching algorithm. \
fast-switch (1): the GCM deactivates the backup \
link after the primary link is re-established \
regardless of the backup transmission activity. \
voice-switch (2): the backup link will be deactivated \
after the primary link is re-established and all voice \
calls over the backup link are disconnected. \
calls over the backup link are disconnected. \
manual-switch-backup(3): the GCM switches to the \
backup in case of the primary failure. The switching \
back to the primary port mst be done manually.\
manual-switch(4): the GCM could be manually switch \
only.\
(Configuration);
HELP = ;
CAPABILITIES = ;rw Enumeration .micom-oscar.25.1.8.1.5 |
nvmGcmUnitSwitchDelayNAME = ;
DESC = NOTE THAT THIS OBJECT IS DEPRECATED. It's \
functionality has been replaced by \
nmvGcmUnitBackupSwitchDelay object. \
The number of minutes that the switching from \
the active backup link to the active primary link \
has to be delayed. (Operational);
HELP = ;
CAPABILITIES = ;rwdeprecated INTEGER .micom-oscar.25.1.8.1.6 |
nvmGcmUnitPrimaryLinkIndexNAME = ;
DESC = The index value that uniquely identifies an entry \
in the GCM Link Table as the primary link. \
(Configuration);
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.25.1.8.1.7 |
nvmGcmUnitBackupRemainTimeNAME = ;
DESC = The maximum number of minutes that the backup link \
remains active after the switching from the backup \
to the primary. This object will be used if the \
object mcmGcmUnitSwitchType is set to \
voice-switch (2). (Configuration);
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.25.1.8.1.8 |
nvmGcmUnitBackupSwitchDelayNAME = ;
DESC = The number of minutes the switching \
has to be delayed before switching \
to the primary link.(Configuration);
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.25.1.8.1.9 |
nvmGcmUnitPrimarySwitchDelayNAME = ;
DESC = The number of minutes the switching has \
to be delayed before switching to the \
backup link. (Configuration);
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.25.1.8.1.10 |
nvmGcmUnitRegionalLinkIndexNAME = ;
DESC = The index value that uniquely identifies an entry \
in the GCM Link Table as the regional link index. \
This GCM link is activated only during the down \
time of the backup link.\
(Configuration);
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.25.1.8.1.11 |
nvmGcmUnitModeCfgNAME = ;
DESC = branch-node(1): The GCM will try to \
to activate at first the primary \
link. In the case of a failure, \
the GCM will activate one of the \
the backup links. During the time \
the primary link is active, the \
backup port is deactivated.
regional-node(2): This mode is \
identical to the branch-mode(1) \
except the backup link is not used.\
When the primary link is active, the \
GCM will not deactivate the backup \
port. If the backup port is an \
ISDN card, the GCM can be configured \
to allow incoming calls by using the \
link specified by the object \
<gcmUnitRegionalLinkIndex>. When the
primary link fails, the activated \
link <gcmUnitRegionalLinkIndex> \
(eg. configured for incoming connection \
ISDN) will be disconnected and the \
backup link will be activated. \
Note that there is no deactivation \
of the backup port and ISDN incomming \
calls can be accepted when the backup \
is not used for backing up the primary \
connection.\
central-site-node(3):Will not have a
MPANL DTE connection. There is no \
need to have the backup functionality. \
The GCM will enable both ports. \
In the case of ISDN, it is possible \
to accept incomming calls. Primary link \
and backup link will have the same \
priority, there is no correlation \
between them. The GCM will activate \
all GCM links configured for this unit.
(Configuration);
HELP = ;
CAPABILITIES = ;rw Enumeration .micom-oscar.25.1.8.1.12 |
nvmGcmUnitPriLinkFailMonStatusNAME = ;
DESC = The GCM link failure monitor \
status. \
(Configuration);
HELP = ;
CAPABILITIES = ;rw Enumeration .micom-oscar.25.1.8.1.13 |
nvmGcmUnitPriLinkFailMonDurMinNAME = ;
DESC = The number of minutes to monitor \
gcmLinkFailureMonThreshold \
activity. The duration timer \
starts when first link failure \
occured while the \
gcmLinkFailureMonStatus is \
enabled(1). \
(Configuration);
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.25.1.8.1.14 |
nvmGcmUnitPriLinkFailMonThrshldNAME = ;
DESC = The maximum number of \
gcmLinkFailureMonCount(below) \
within gcmLinkFailureMonDurMin \
(above)before switching from primary \
to backup.\
(Configuration);
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.25.1.8.1.15 |
nvmGcmBackupCfgTableNAME = ;
DESC = The GCM Backup Configuration Table. \
(Configuration) ;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP ; SEQUENCE OF NvmGcmBackupCfgEntry .micom-oscar.25.1.9 |
nvmGcmBackupCfgEntryNAME = ;
DESC = An entry in the GCM Backup Configuration \
Table. (Configuration) ;
HELP = ;
CAPABILITIES = ; NvmGcmBackupCfgEntry .micom-oscar.25.1.9.1 |
nvmGcmBackupCfgIndexNAME = ;
DESC = The index value which uniquely identifies an \
entry in the GCM Backup Configuration Table. \
(Configuration);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.25.1.9.1.1 |
nvmGcmBackupCfgUnitIndexNAME = ;
DESC = The index value that uniquely identifies an \
entry in the GCM Unit Table. (Configuration);
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.25.1.9.1.2 |
nvmGcmBackupCfgLinkIndexNAME = ;
DESC = The index value that uniquely identifies an \
entry in the GCM Link Table. This GCM Link \
will be used for Backup Link activation. \
(Configuration);
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.25.1.9.1.3 |
nvmGcmBackupCfgLinkRowStatusNAME = ;
DESC = This object is used to create and delete rows \
in the GCM Backup Configuration Table. \
(Configuration);
HELP = ;
CAPABILITIES = ;rw Enumeration .micom-oscar.25.1.9.1.4 |
nvmGcmTimerTableNAME = ;
DESC = The GCM Timer Table. (Configuration) ;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP ; SEQUENCE OF NvmGcmTimerEntry .micom-oscar.25.1.10 |
nvmGcmTimerEntryNAME = ;
DESC = An entry in the GCM Timer Table. \
(Configuration) ;
HELP = ;
CAPABILITIES = ; NvmGcmTimerEntry .micom-oscar.25.1.10.1 |
nvmGcmTimerIndexNAME = ;
DESC = The index value which uniquely identifies an \
entry in the GCM Timer Table. (Configuration);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.25.1.10.1.1 |
nvmGcmTimerUnitIndexNAME = ;
DESC = The index value that uniquely identifies an \
entry into the GCM Unit Table. (Configuration);
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.25.1.10.1.2 |
nvmGcmTimerInactStartHrNAME = ;
DESC = The hours designation to start inactivity. The \
connection will be automatically disconnected \
if the system time is equal to the \
nvmGcmTimerInactStartHr/Min. \
Similarly, if the Inactivity Timer is configured \
as a periodic timer (nvmGcmTimerInactPeriodic), \
this object designates the hour to start inactivity. \
(Configuration);
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.25.1.10.1.3 |
nvmGcmTimerInactStartMinNAME = ;
DESC = The minutes designation to start inactivity. The \
connection will be automatically disconnected \
if the system time is equal to the \
nvmGcmTimerInactStartHr/Min. \
Similarly, if the Inactivity Timer is configured \
as a periodic timer (nvmGcmTimerInactPeriodic), \
this object designates the minute to start inactivity.\
(Configuration);
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.25.1.10.1.4 |
nvmGcmTimerInactDurationHrNAME = ;
DESC = The hours designation for inactivity duration. \
The inactivity time duration of the GCM Unit is \
defined by nvmGcmTimerInactDurationHr/Min. \
Similarly, if the Inactivity Timer is configured as \
a periodic timer (nvmGcmTimerInactPeriodic), \
this object designates the inactive connection \
duration (hours) period. (Configuration);
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.25.1.10.1.5 |
nvmGcmTimerInactDurationMinNAME = ;
DESC = The minutes designation for inactivity duration. \
The inactivity time duration of the GCM Unit is \
defined by nvmGcmTimerInactDurationHr/Min. \
Similarly, if the Inactivity Timer is configured as \
a periodic timer (nvmGcmTimerInactPeriodic), \
this object designates the inactive connection \
duration (minutes) period. (Configuration);
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.25.1.10.1.6 |
nvmGcmTimerInactMondayNAME = ;
DESC = Enables (1) or disables (2) the timer inactivity \
administration for the day Monday. \
(Configuration);
HELP = ;
CAPABILITIES = ;rw Enumeration .micom-oscar.25.1.10.1.7 |
nvmGcmTimerInactTuesdayNAME = ;
DESC = Enables (1) or disables (2) the timer inactivity \
administration for the day Tuesday. \
(Configuration);
HELP = ;
CAPABILITIES = ;rw Enumeration .micom-oscar.25.1.10.1.8 |
nvmGcmTimerInactWednesdayNAME = ;
DESC = Enables (1) or disables (2) the timer inactivity \
administration for the day Wednesday. \
(Configuration);
HELP = ;
CAPABILITIES = ;rw Enumeration .micom-oscar.25.1.10.1.9 |
nvmGcmTimerInactThursdayNAME = ;
DESC = Enables (1) or disables (2) the timer inactivity \
administration for the day Thursday. \
(Configuration);
HELP = ;
CAPABILITIES = ;rw Enumeration .micom-oscar.25.1.10.1.10 |
nvmGcmTimerInactFridayNAME = ;
DESC = Enables (1) or disables (2) the timer inactivity \
administration for the day Friday. \
(Configuration);
HELP = ;
CAPABILITIES = ;rw Enumeration .micom-oscar.25.1.10.1.11 |
nvmGcmTimerInactSaturdayNAME = ;
DESC = Enables (1) or disables (2) the timer inactivity \
administration for the day Saturday. \
(Configuration);
HELP = ;
CAPABILITIES = ;rw Enumeration .micom-oscar.25.1.10.1.12 |
nvmGcmTimerInactSundayNAME = ;
DESC = Enables (1) or disables (2) the timer inactivity \
administration for the day Sunday. \
(Configuration);
HELP = ;
CAPABILITIES = ;rw Enumeration .micom-oscar.25.1.10.1.13 |
nvmGcmTimerInactPeriodicNAME = ;
DESC = Enables (1) or disables (2) the Periodic Timer \
inactivity administration functionality. \
(Configuration);
HELP = ;
CAPABILITIES = ;rw Enumeration .micom-oscar.25.1.10.1.14 |
nvmGcmTimerRowStatusNAME = ;
DESC = This object is used to create and delete rows \
in the GCM Timer Table. (Configuration);
HELP = ;
CAPABILITIES = ;rw Enumeration .micom-oscar.25.1.10.1.15 |
status OBJECT IDENTIFIER .micom-oscar.25.2 |
mcmGcmHwStatusTableNAME = ;
DESC = The GCM Hardware Status Table.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP ; SEQUENCE OF McmGcmHwStatusEntry .micom-oscar.25.2.1 |
mcmGcmHwStatusEntryNAME = ;
DESC = An entry in the GCM Hardware Status \
Table.;
HELP = ;
CAPABILITIES = ; McmGcmHwStatusEntry .micom-oscar.25.2.1.1 |
mcmGcmHwStatusIndexNAME = ;
DESC = The index value that uniquely identifies an entry \
in the GCM Hardware Status table. The first two \
entries are internal ports. Entry 1 describes a port \
that is ever down. The second entry is an ever-up \
port. The GCM will not change the status of these \
two ports. They are not connected to any physical \
interface. To change the status of the other entries, \
the GCM communicates with associated PCM.;
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.25.2.1.1.1 |
mcmGcmHwStatusDescNAME = ;
DESC = The name of the GCM Hardware Interface.;
HELP = ;
CAPABILITIES = ;ro DisplayString .micom-oscar.25.2.1.1.2 |
mcmGcmHwStatusOperStatusNAME = ;
DESC = The status of the Hardware interface. After \
reset the normal status of an entry is down (4). \
To activate the hardware port, the GCM sends \
a message to the PCM and changes the status to \
enable-req(5). A positive activation changes the \
status to up(2). If the activation fails (e.g., no \
cable is plugged in), the status will be set to \
link-error(7). Only in this state, the PCM monitors \
the status of the port. In the state down(4), the \
PCM does not monitor the port status.;
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.25.2.1.1.3 |
mcmGcmHwStatusActiveLinkNAME = ;
DESC = The number of active GCM links on this Hardware \
port.;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.25.2.1.1.4 |