MICOM-FRAMERELAY-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for MICOM-FRAMERELAY-MIB.
445
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
445 total| Object Name |
|---|
micom-frame-relay OBJECT IDENTIFIER .micom-oscar.7 |
RFC1155-SMI Unknown .micom-oscar.7 |
mcmFrWanLinkUpNAME = ;
DESC = FR TRAP message: indication of WAN link \
up.\
Severity Level: INFORMATIVE.;
HELP = The Frame Relay WAN LINK is up. \
Normal status Indicator.; TRAP-TYPE .micom-oscar.7.0.1 |
mcmFrWanLinkDownNAME = ;
DESC = FR TRAP message: indication of WAN link \
down.\
Severity Level: CRITICAL.;
HELP = Loss of Physical connection, or LMI is dropped.\
Please check the physical connection; the MPANL \
LMI status, and provisioning on Passport. If \
no change, contact Sys Admin., or Field \
Personnel.; TRAP-TYPE .micom-oscar.7.0.2 |
fr-configuration OBJECT IDENTIFIER .micom-oscar.7.1 |
mcmFrGlobalGroup OBJECT IDENTIFIER .micom-oscar.7.1.1 |
mcmFrMaxDLCINAME = ;
DESC = The maximum number of DLCIs that \
may be configured for the entire \
box;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;ro INTEGER .micom-oscar.7.1.1.1 |
mcmFrMaxVirtualPortsNAME = ;
DESC = The maximum number of Virtual Ports that \
may be configured for the entire \
box;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;ro INTEGER .micom-oscar.7.1.1.2 |
mcmFrMaxDlciPerLineNAME = ;
DESC = The maximum number of DLCIs that may \
be configured for a Frame Relay line;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;ro INTEGER .micom-oscar.7.1.1.3 |
mcmFrConnectTimeNAME = ;
DESC = The sysUpTime when the FR Driver was \
initialized;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;ro TimeTicks (SNMPv2-SMI) .micom-oscar.7.1.1.4 |
mcmFrOctetsSentNAME = ;
DESC = Total number of Frame Relay Information \
field octets that were sent out all FR \
ports;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;ro Counter .micom-oscar.7.1.1.5 |
mcmFrOctetsReceivedNAME = ;
DESC = Total number of Frame Relay Information \
Field octets that were received across all \
FR ports;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;ro Counter .micom-oscar.7.1.1.6 |
mcmFrFramesSentNAME = ;
DESC = Total number of Frame Relay Frames \
sent out all FR ports;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;ro Counter .micom-oscar.7.1.1.7 |
mcmFrFramesReceivedNAME = ;
DESC = Total number of Frame Relay Frames \
received in on all FR ports;
HELP =
CAPABILITIES = NET_CFG, VPN_DISP;ro Counter .micom-oscar.7.1.1.8 |
mcmFrGlobalGroupCntrActionNAME = ;
DESC = This object has been OBSOLETED for software \
releases beginning with Release 3.0. \
Setting this object to reset will reset \
counters in this group;
HELP = All objects will be reset in this group \
except mcmFrMaxDLCI, mcmFrMaxVirtualPorts, \
mcmFrMaxDlciPerLine and mcmFrConnectTime \
which are not counters;
CAPABILITIES = NET_CFG, VPN_CFG;rwobsolete Enumeration .micom-oscar.7.1.1.9 |
mcmFrDNANumberingPlanNAME = ;
DESC = The value of this object designates the \
numbering plan of the DNA;
HELP = The number plan is used in conjunction \
with a DNA. This object identifies the \
type of call as E.164 or X.121 ;
CAPABILITIES = NET_CFG, VPN_DISP;ro Enumeration .micom-oscar.7.1.1.10 |
mcmFrActivePanlDlciSVCsNAME = ;
DESC = The number of active PANL DLCI SVCs \
for all FR ports.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;ro Counter .micom-oscar.7.1.1.11 |
mcmFrTotalTunnelingPVCsNAME = ;
DESC = The total number of tunneling PVCs configured.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;ro Counter .micom-oscar.7.1.1.12 |
mcmFrActiveTunnelingPVCsNAME = ;
DESC = The number of active tunneling PVCs configured.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;ro Counter .micom-oscar.7.1.1.13 |
mcmFrPanlLmiTrapEnableNAME = ;
DESC = This object indicates whether the generation of \
Trap messages are enabled/disabled for the FR \
PANL LMI module.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;ro Enumeration .micom-oscar.7.1.1.14 |
mcmFrMsmTrapEnableNAME = ;
DESC = This object indicates whether the generation of \
Trap messages are enabled/disabled for the FR \
MSM module.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;ro Enumeration .micom-oscar.7.1.1.15 |
mcmFrCoreTrapEnableNAME = ;
DESC = This object indicates whether the generation of \
Trap messages are enabled/disabled for the FR \
Core module.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;ro Enumeration .micom-oscar.7.1.1.16 |
mcmFrPlmTrapEnableNAME = ;
DESC = This object indicates whether the generation of \
Trap messages are enabled/disabled for the FR \
Plm module.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;ro Enumeration .micom-oscar.7.1.1.17 |
mcmFrPhyPortTableNAME = ;
DESC = Table of physical port entries \
containing flow control info \
and statistics;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP; SEQUENCE OF McmFrPhyPortEntry .micom-oscar.7.1.2 |
mcmFrPhyPortEntryNAME = ;
DESC = Entry for a Frame Relay physical \
port;
HELP = Entry for a Frame Relay physical \
port, containing flow control \
information and statistics NOT \
included in the RFC 1315 mib;
CAPABILITIES = ; McmFrPhyPortEntry .micom-oscar.7.1.2.1 |
mcmFrPhyPortExtIfIndexNAME = ;
DESC = The ifIndex of the physical port;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.2.1.1 |
mcmFrPhyPortFlowControlNAME = ;
DESC = Determines whether or not rate enforcement \
based on congestion should be enforced;
HELP = Enabling this feature will allow packets \
exceeding the current allowable rate \
to be dropped if congestion has been \
detected on the network.;
CAPABILITIES = ;ro Enumeration .micom-oscar.7.1.2.1.2 |
mcmFrPhyPortThroughputNAME = Frame Relay DLCI Throughput;
DESC = This object has been DEPRECATED for software \
releases beginning with Release 3.0, and replaced with \
new objects TxThroughput, RxThroughput. \
Default throughput for a PVC;
HELP = Defalut throughput used for all \
PVCs on the same frame relay \
physical interface. Will be \
assigned to a PVC when the PVC \
is created. valid if flow cntl \
is enabled. ;
CAPABILITIES = ;rodeprecated INTEGER .micom-oscar.7.1.2.1.3 |
mcmFrPhyPortDeltaNAME = Frame Relay Delta;
DESC = Delta time interval to increase or \
decrease the transmit rate by monitoring \
the number of frames rcvd or txd with the \
FECN bit cleared or set;
HELP = Default used for adding PVCs. The \
delta time interval to increase or \
decrease the current transmit rate \
based on then number of frames \
received with the FECN bit cleared \
or set. Typically 4 types end-to-end \
transit delay. Used only if flow \
control is enabled. (In 1 second \
units.). Valid if flow cntl is enabled;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.2.1.4 |
mcmFrPhyPortConsectiveFramesNAME = ;
DESC = Number of consecutive frames received \
with the BECN bit set before reducing \
the transmit rate;
HELP = Number of consecutive frames that must \
have BECN bit set before reducing \
transmit rate. Transmit rate is \
increased when S/2 consecutive frames \
are received with teh BECN bit cleared. \
Valid only when flow control is enabled.\
See CCITT Q.922 Appendix I, for the \
method to compute parameter S.\
Valid if flow cntl is enabled;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.2.1.5 |
mcmFrPhyPortMtuSizeNAME = ;
DESC = This object has been DEPRECATED for software \
releases beginning with Release 3.0, and replaced with \
new objects TxMaxFrameSize, RxMaxFrameSize. \
Maximum Transmission Unit Size;
HELP = Maximum Packet size that can be \
passed to Frame Relay and will \
be sent across the Frame Relay \
network.;
CAPABILITIES = ;rodeprecated INTEGER .micom-oscar.7.1.2.1.6 |
mcmFrPhyPortConnectTimeNAME = ;
DESC = sysUpTime when the port was created;
HELP = ;
CAPABILITIES = ;ro TimeTicks (SNMPv2-SMI) .micom-oscar.7.1.2.1.7 |
mcmFrPhyPortLMISentNAME = ;
DESC = Number of PVC LMI frames sent on \
physical port (DLCI 0);
HELP = ;
CAPABILITIES = ;ro Counter .micom-oscar.7.1.2.1.8 |
mcmFrPhyPortLMIReceivedNAME = ;
DESC = Number of PVC LMI frames received \
on this port (DLCI 0);
HELP = ;
CAPABILITIES = ;ro Counter .micom-oscar.7.1.2.1.9 |
mcmFrPhyPortXIDSentNAME = ;
DESC = Number of XID frames sent on \
this interface;
HELP = Valid only if packet negotiation is enabled. \
Network must support XID frames;
CAPABILITIES = ;ro Counter .micom-oscar.7.1.2.1.10 |
mcmFrPhyPortXIDReceivedNAME = ;
DESC = Number of XID frames received on \
this interface;
HELP = Valid only if packet negotiation is enabled. \
Network must support XID frames;
CAPABILITIES = ;ro Counter .micom-oscar.7.1.2.1.11 |
mcmFrPhyPortCLLMSentNAME = ;
DESC = Number of CLLM frames sent on \
this interface;
HELP = Network must support CLLM before \
this feature is enabled;
CAPABILITIES = ;ro Counter .micom-oscar.7.1.2.1.12 |
mcmFrPhyPortCLLMReceivedNAME = ;
DESC = Number of CLLM frames received on \
this interface;
HELP = Network must support CLLM before \
this feature is enabled;
CAPABILITIES = ;ro Counter .micom-oscar.7.1.2.1.13 |
mcmFrPhyPortHeaderErrorsNAME = ;
DESC = Number of frames received with \
incomplete or missing address \
field;
HELP = ;
CAPABILITIES = ;ro Counter .micom-oscar.7.1.2.1.14 |
mcmFrPhyPortInvalidDLCINAME = ;
DESC = Number of frames on an unassigned \
or invalid number;
HELP = ;
CAPABILITIES = ;ro Counter .micom-oscar.7.1.2.1.15 |
mcmFrPhyPortShortFramesNAME = ;
DESC = Number of short frames received;
HELP = ;
CAPABILITIES = ;ro Counter .micom-oscar.7.1.2.1.16 |
mcmFrPhyPortLongFramesNAME = ;
DESC = Number of long frames received that \
were too long (larger than MTU);
HELP = ;
CAPABILITIES = ;ro Counter .micom-oscar.7.1.2.1.17 |
mcmFrPhyPortIgnoredFramesNAME = ;
DESC = Number of frames received that were \
ignored (no errors);
HELP = ;
CAPABILITIES = ;ro Counter .micom-oscar.7.1.2.1.18 |
mcmFrPhyPortXIDExpirationsNAME = ;
DESC = Number of XID TM21 timer expirations;
HELP = Valid only if MTU negotiation is \
enabled;
CAPABILITIES = ;ro Counter .micom-oscar.7.1.2.1.19 |
mcmFrPhyPortTxExpirationsNAME = ;
DESC = Number of flow control (CLLM) timer \
expirations;
HELP = Valid only if flow control negotiation is configured;
CAPABILITIES = ;ro Counter .micom-oscar.7.1.2.1.20 |
mcmFrPhyPortPVCLMIStatusNAME = ;
DESC = The status of the PVC LMI (up or down). ;
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.7.1.2.1.21 |
mcmFrPhyPortSVCLMIStatusNAME = ;
DESC = This object has been OBSOLETED for software \
releases beginning with Release 3.0. \
The status of the SVC LMI (up or down). ;
HELP = ;
CAPABILITIES = ;roobsolete Enumeration .micom-oscar.7.1.2.1.22 |
mcmFrPhyPortActivePanlDlciSVCsNAME = ;
DESC = Number of active PANL DLCI SVCs on \
this interface.;
HELP =;
CAPABILITIES = ;ro Counter .micom-oscar.7.1.2.1.23 |
mcmFrPhyPortRxDataFramesNAME = ;
DESC = This object has been DEPRECATED for software \
releases beginning with Release 3.0, and replaced \
with the new object mcmFrPhyPortDataFrames. \
Number of data frames received on all assigned \
DLCIs.;
HELP =;
CAPABILITIES = ;rodeprecated Counter .micom-oscar.7.1.2.1.24 |
mcmFrPhyPortTxDataFramesNAME = ;
DESC = This object has been DEPRECATED for software \
releases beginning with Release 3.0, and replaced \
with the new object mcmFrPhyPortDataFrames. \
Number of data frames sent on all assigned \
DLCIs.;
HELP =;
CAPABILITIES = ;rodeprecated Counter .micom-oscar.7.1.2.1.25 |
mcmFrPhyPortRxActivationsNAME = ;
DESC = Number of activations received on this interface.;
HELP =;
CAPABILITIES = ;ro Counter .micom-oscar.7.1.2.1.26 |
mcmFrPhyPortRxDeactivationsNAME = ;
DESC = Number of deactivations received on this interface.;
HELP =;
CAPABILITIES = ;ro Counter .micom-oscar.7.1.2.1.27 |
mcmFrPhyPortRxOkAcksNAME = ;
DESC = Number of OK ACK messages received on this \
interface.;
HELP =;
CAPABILITIES = ;ro Counter .micom-oscar.7.1.2.1.28 |
mcmFrPhyPortRxErrAcksNAME = ;
DESC = Number of Error ACK messages received on this \
interface.;
HELP =;
CAPABILITIES = ;ro Counter .micom-oscar.7.1.2.1.29 |
mcmFrPhyPortRxUnknownsNAME = ;
DESC = Number of Unknown messages received on this \
interface.;
HELP =;
CAPABILITIES = ;ro Counter .micom-oscar.7.1.2.1.30 |
mcmFrPhyPortRxErrorsNAME = ;
DESC = Number of Error messages received on this \
interface.;
HELP =;
CAPABILITIES = ;ro Counter .micom-oscar.7.1.2.1.31 |
mcmFrPhyPortRxOctetsNAME = ;
DESC = Number of data bytes received.;
HELP =;
CAPABILITIES = ;ro Counter .micom-oscar.7.1.2.1.32 |
mcmFrPhyPortTxOctetsNAME = ;
DESC = Number of data bytes sent.;
HELP =;
CAPABILITIES = ;ro Counter .micom-oscar.7.1.2.1.33 |
mcmFrPhyPortTxThroughputNAME = Frame Relay DLCI Tx Throughput;
DESC = The transmission CIR expressed in bits/sec.;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.2.1.34 |
mcmFrPhyPortRxThroughputNAME = Frame Relay DLCI Rx Throughput;
DESC = The receive CIR expressed in bits/sec.;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.2.1.35 |
mcmFrPhyPortTxMaxFrameSizeNAME = ;
DESC = The maximum transmission FR packet size \
expressed in bytes.;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.2.1.36 |
mcmFrPhyPortRxMaxFrameSizeNAME = ;
DESC = The maximum receive FR packet size \
expressed in bytes.;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.2.1.37 |
mcmFrPhyPortRateEnfNAME = ;
DESC = The rate enforcement enabled or disabled \
parameter for FR congestion management \
processing.;
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.7.1.2.1.38 |
mcmFrPhyPortTxBcNAME = ;
DESC = The transmission committed burst size \
expressed in bits.;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.2.1.39 |
mcmFrPhyPortRxBcNAME = ;
DESC = The receive committed burst size \
expressed in bits.;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.2.1.40 |
mcmFrPhyPortTxBeNAME = ;
DESC = The transmission excess burst size \
expressed in bits.;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.2.1.41 |
mcmFrPhyPortRxBeNAME = ;
DESC = The receive excess burst size \
expressed in bits.;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.2.1.42 |
mcmFrPhyPortDataFramesNAME = ;
DESC = Total number of data frames on all assigned \
DLCIs.;
HELP =;
CAPABILITIES = ;ro Counter .micom-oscar.7.1.2.1.43 |
mcmFrPVCPhyTableNAME = ;
DESC = Table that extends the RFC 1315 \
DLCMI table contianing info \
about the PVC LMI;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP; SEQUENCE OF McmFrPVCPhyEntry .micom-oscar.7.1.3 |
mcmFrPVCPhyEntryNAME = ;
DESC = Entry into the micom PVC LMI \
configuration extensions;
HELP = Entry in the PVC Phys Table. \
Additional information required \
(not in RFC 1315 DLCI table);
CAPABILITIES = ; McmFrPVCPhyEntry .micom-oscar.7.1.3.1 |
mcmFrPVCPhyIfIndexNAME = ;
DESC = IfIndex of the physical port;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.3.1.1 |
mcmFrPVCLMIModeNAME = ;
DESC = Indicates whether the local PVC \
LMI is operating in the DTE or \
DCE mode;
HELP = In DTE mode the Status Enquiry messages \
will be sent. In DCE mode, Status \
Reports will be sent in response \
to Status Enquiry mesages.;
CAPABILITIES = ;ro Enumeration .micom-oscar.7.1.3.1.2 |
mcmFrPVCBiDirNAME = ;
DESC = Indicates whether the PVC LMI \
should perform both the sending \
of status enquiries and sending \
of status reports;
HELP = Must be with bilateral agreement \
with the switch enabled. Switch \
may send status enquiry messages \
as defined for the DTEs and allows\
the DTE to respond with a status \
messages in the same way as switch \
does (in this mode Status Enquiries \
will still be transmitted normally;
CAPABILITIES = ;ro Enumeration .micom-oscar.7.1.3.1.3 |
mcmFrSVCPhyTableNAME = ;
DESC = Table containing the SVC default \
parameters ;
HELP = Table containing default SVC \
parameters to be used if none \
are specified when configuring \
an SVC;
CAPABILITIES = NET_CFG, VPN_DISP; SEQUENCE OF McmFrSVCPhyEntry .micom-oscar.7.1.4 |
mcmFrSVCPhyEntryNAME = ;
DESC = Entry into the SVC Default\
parameter table;
HELP = Each entry contains the default \
SVC parameters for the specified \
interface;
CAPABILITIES = ; McmFrSVCPhyEntry .micom-oscar.7.1.4.1 |
mcmFrSVCPhyIfIndexNAME = ;
DESC = IfIndex of the physical port \
the SVC information is \
associated with;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.4.1.1 |
mcmFrSVCStateNAME = ;
DESC = SVC LMI Protocol to be used;
HELP = All SVC connection setup must \
use the same LMI protocol;
CAPABILITIES = ;ro Enumeration .micom-oscar.7.1.4.1.2 |
mcmFrSVCT303NAME = ;
DESC = The duration, in seconds, \
of the setup timer for SVCs.;
HELP = Causes at most one Setup retransmission.\
How long the SVC LMI will wait \
for a response from the network \
(e.g. call proceeding, connect) \
before the setup message will be \
retransmitted. In 1 second unit. \
Q.931 recommends 4 seconds;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.4.1.3 |
mcmFrSVCT305NAME = ;
DESC = The duration of the Disconnect \
timer (in seconds) for SVCs.;
HELP = Causes at most one release \
transmission. How long the SVC LMI will wait \
for a release message from the \
network before it will transmit \
a release message. (The SVC LMI \
will then wait for a release \
message from the network.) In 1 second \
unit. Q.931 recommends 30 seconds;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.4.1.4 |
mcmFrSVCT308NAME = ;
DESC = The duration of Release timer (in \
seconds) for SVCs.;
HELP = Causes at most one release transmission. \
How long the SVC LMI will wait \
for a response from the network \
before the release message will \
be retransmitted. (When the \
second release is transmitted, \
the local SVC LMI considers \
the corresponding SVC to have \
been released by the network \
as well - even if no response \
is received.) In 1 second units. \
Q.931 recommends 4 seconds;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.4.1.5 |
mcmFrSVCT310NAME = ;
DESC = The duration of Connect Timer (in seconds) \
for SVCs.;
HELP = Causes connection disconnection. \
How long the SVC LMI will wait \
(in seconds) for a Connect message \
(after receiving the Call Proceeding \
message) before sending a Release \
message. In 1 second units. Q.931 \
recommends a duration between 30\
to 120 seconds on the DTE side and \
10 seconds on the DC#E side;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.4.1.6 |
mcmFrSVCMaxCallsNAME = ;
DESC = Maximum number of SVC Connections;
HELP = The sum of both the incoming and outgoing
SVCs;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.4.1.7 |
mcmFrSVCMaxTxSizeNAME = ;
DESC = Default Maximum transmit frame size, \
in bytes, to negotiate with the remote;
HELP = This value will be used only if a \
specific value is not included in the \
Connect Request primitive. A value of \
0 indicates the network default values \
are to be used (unless it is passed down \
at connect time). Expressed in bytes.
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.4.1.8 |
mcmFrSVCMaxRxSizeNAME = ;
DESC = Maximum receive frame size in bytes;
HELP = Default value for the maximum receive \
frame size to negotiate with the remote. \
This value will be used only if a \
specific value is not included in the \
Connect Request primitive. A value of \
0 indicates the network default values \
are to be used (unless it is passed down \
at connect time). Expressed in bytes.
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.4.1.9 |
mcmFrSVCMinDLCINAME = ;
DESC = Lowest DLCI value for SVCs on \
this network link;
HELP = This value applies only to SVC connections. \
PVC DLCI connections may be established \
above or below this value.;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.4.1.10 |
mcmFrSVCMaxDLCINAME = ;
DESC = Highest DLCI value for SVCs on \
the this network;
HELP = This value applies only to SVC connections. \
PVC DLCI connections may be established \
above or below this value.;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.4.1.11 |
mcmFrSVCMinTxThroughputNAME = ;
DESC = Minimum transmit throughput in \
bits per seconds;
HELP = To negotiate with the remote when used with the \
maximum transmit throughput \
unless overwritten at connect time. \
A value of 0 indicates the network \
default values are to be used;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.4.1.12 |
mcmFrSVCMinRxThroughputNAME = ;
DESC = Minimum receive throughput in \
bits per seconds;
HELP = To negotiate with the remote when used with the \
maximum receive throughput \
unless overwritten at connect time. \
A value of 0 indicates the network \
default values are to be used;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.4.1.13 |
mcmFrSVCMaxTxThroughputNAME = ;
DESC = Maximum transmit throughput in \
bits per seconds;
HELP = To negotiate with the remote when used with the \
minimum transmit throughput \
unless overwritten at connect time. \
A value of 0 indicates the network \
default values are to be used;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.4.1.14 |
mcmFrSVCMaxRxThroughputNAME = ;
DESC = Maximum receive throughput in \
bits per seconds;
HELP = To negotiate with the remote when used with the \
minimum receive throughput \
unless overwritten at connect time. \
A value of 0 indicates the network \
default values are to be used;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.4.1.15 |
mcmFrSVCTxBurstSizeNAME = ;
DESC = Transmit burst size in bytes;
HELP = Default Committed Transmit burst \
size, in bytes, to negotiate with \
the remote unless overwritten at \
connect time. A value of 0 \
indicates the network default \
values are to be used;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.4.1.16 |
mcmFrSVCRxBurstSizeNAME = ;
DESC = Receive burst size in bytes;
HELP = Default Committed Receive burst \
size, in bytes, to negotiate with \
the remote unless overwritten at \
connect time. A value of 0 \
indicates the network default \
values are to be used;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.4.1.17 |
mcmFrSVCExcessTxBurstSizeNAME = ;
DESC = Excess transmit burst size in bytes;
HELP = Default Uncommitted Transmit burst \
size, in bytes, to negotiate with \
the remote unless overwritten at \
connect time. A value of 0 \
indicates the network default \
values are to be used;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.4.1.18 |
mcmFrSVCExcessRxBurstSizeNAME = ;
DESC = Excess receive burst size in bytes;
HELP = Default Uncommitted Receive burst \
size, in bytes, to negotiate with \
the remote unless overwritten at \
connect time. A value of 0 \
indicates the network default \
values are to be used;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.4.1.19 |
mcmFrVirtualPortTableNAME = ;
DESC = Table to define the virtual port;
HELP = Table to provide the mapping between \
virtual ports and physical ports \
and to define the virtual port \
parameters;
CAPABILITIES = NET_CFG, VPN_DISP; SEQUENCE OF McmFrVirtualPortEntry .micom-oscar.7.1.5 |
mcmFrVirtualPortEntryNAME = ;
DESC = Entry into the Virtual port table;
HELP = Each entry in this table contains \
information to define a virtual \
port;
CAPABILITIES = ; McmFrVirtualPortEntry .micom-oscar.7.1.5.1 |
mcmFrVirtualPortIfIndexNAME = Virtual Port Interface Number;
DESC = IfIndex associated with this Virtual Port;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.5.1.1 |
mcmFrVirtualPortPhyPortIfIndexNAME = ;
DESC = *******NOTE: THIS OBJECT IS OBSOLETE*******
This information is no longer useful for \
virtual ports. The virtual ports no longer \
have an underlying network. Only SVC DNAs \
and PVC DLCIs are associated with VPs now. \
The underlying MPANL will take care of which \
link the SVC is to be made on and a Physical \
Line IfIndex has been added to the PVCs. VP \
are no longer required to provide the backup \
link support (MPANL now does that).\
IfIndex of the Frame Relay physical \
port for which the virtual port is \
(or will be) linked to;
HELP = ;
CAPABILITIES = ;roobsolete INTEGER .micom-oscar.7.1.5.1.2 |
mcmFrVirtualPortPPANAME = This object has been OBSOLETED for software \
releases beginning with Release 3.0. \
Virtual Port PPA Number ;
DESC = Point of Physical attachment for \
this Virtual Port;
HELP = ;
CAPABILITIES = ;roobsolete INTEGER .micom-oscar.7.1.5.1.3 |
mcmFrVirtualPortModeNAME = Virtual Port Mode;
HELP = Mode of the virtual port;
DESC = Easy Routing requires that data \
will be switched between the \
Virtual Circuits on the this \
virutal port. Basic mode turns \
off the switching mode;
CAPABILITIES = ;ro Enumeration .micom-oscar.7.1.5.1.4 |
mcmFrVirtualPortStateNAME = Virtual Port State;
DESC = State of the virtual port;
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.7.1.5.1.5 |
mcmFrVirtualPortEntryStatusNAME = ;
DESC = Virtual port row status;
HELP = Indicates whether or not this \
entry is valid;
CAPABILITIES = ;ro Enumeration .micom-oscar.7.1.5.1.6 |
mcmFrVirtualPortProtocolBindingNAME = ;
DESC = Bitmap that contains the protocols bound \
to this Virtual Port.;
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.7.1.5.1.7 |
mcmFrVirtualPortNumberNAME = ;
DESC = This object indicates the Virtual \
Port Number used as an identifier \
for a Virtual Port. (Operational);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.5.1.8 |
mcmFrSVCMapTableNAME = ;
DESC = Table for SVC to VP bindings;
HELP = This table will give the SVC \
DNA address to be bound to the \
specified Virtual Port;
CAPABILITIES = NET_CFG, VPN_DISP; SEQUENCE OF McmFrSVCMapEntry .micom-oscar.7.1.6 |
mcmFrSVCMapEntryNAME = ;
DESC = Entry in the SVC to VP binding \
table;
HELP = SVC/VP binding entry in the SVC \
binding table. Multiple SVCS \
(DNAs) may be bound to a single \
VP (ifindex);
CAPABILITIES = ; McmFrSVCMapEntry .micom-oscar.7.1.6.1 |
mcmFrSVCMapVirtualPortIfIndexNAME = ;
DESC = Virtual Port ifIndex associated \
with this DNA;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.6.1.1 |
mcmFrSVCMapDNANAME = ;
DESC = Remote DNA to associate SVC with \
the corresponding virtual port;
HELP = DNA to be mapped to the \
corresponding virtual port. \
This will be used to create \
an SVC to the corresponding \
remote DNA;
CAPABILITIES = ;ro OCTET STRING .micom-oscar.7.1.6.1.2 |
mcmFrSVCMapDLCINAME = ;
DESC = DLCI for the connected SVC;
HELP = Valid only when the SVC is up;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.6.1.3 |
mcmFrSVCMapMaxTxSizeNAME = ;
DESC = Maximum transmit frame size to \
negotiate with the remote (in \
bytes);
HELP = This value will override the default values for \
the physical interface. A value \
of 0 indicates the networks default \
values are to be used. Experessed in \
bytes;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.6.1.4 |
mcmFrSVCMapMaxRxSizeNAME = ;
DESC = Maximum receive frame size to \
negotiate with the remote (in \
bytes);
HELP = This value will override the default values for \
the physical interface. A value \
of 0 indicates the networks default \
values are to be used. Experessed in \
bytes;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.6.1.5 |
mcmFrSVCMapMinTxThroughputNAME = ;
DESC = Minimum transmit throughput in \
bits per second to negotiate with \
the remote;
HELP = Used with the maximum transmit throughput. \
This value will override default \
values given for this physical \
interface. A value of 0 indicates \
the network default values are to \
be used;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.6.1.6 |
mcmFrSVCMapMinRxThroughputNAME = ;
DESC = Minimum receive throughput in \
bits per second to negotiate with \
the remote;
HELP = Used with the maximum receive throughput. \
This value will override default \
values given for this physical \
interface. A value of 0 indicates \
the network default values are to \
be used;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.6.1.7 |
mcmFrSVCMapMaxTxThroughputNAME = ;
DESC = Maximum transmit throughput in \
bits per second to negotiate with \
the remote;
HELP = Used with the minimum transmit throughput. \
This value will override default \
values given for this physical \
interface. A value of 0 indicates \
the network default values are to \
be used;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.6.1.8 |
mcmFrSVCMapMaxRxThroughputNAME = ;
DESC = Maximum receive throughput in \
bits per second to negotiate with \
the remote;
HELP = Used with the minimum receive throughput. \
This value will override default \
values given for this physical \
interface. A value of 0 indicates \
the network default values are to \
be used;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.6.1.9 |
mcmFrSVCMapTxBurstSizeNAME = ;
DESC = Transmit burst size in bytes;
HELP = Committed transmit burst size, \
in bytes, to negotiate with the \
remote. This value will override \
default values entered for the \
network. A value of 0 indicates \
the network default values are to \
be used;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.6.1.10 |
mcmFrSVCMapRxBurstSizeNAME = ;
DESC = Receive burst size in bytes;
HELP = Committed receive burst size, \
in bytes, to negotiate with the \
remote. This value will override \
default values entered for the \
network. A value of 0 indicates \
the network default values are to \
be used;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.6.1.11 |
mcmFrSVCMapExcessTxBurstSizeNAME = ;
DESC = Excess transmit burst size in bytes;
HELP = Uncommitted transmit burst size, \
in bytes, to negotiate with the \
remote. This value will override \
default values entered for the \
network. A value of 0 indicates \
the network default values are to \
be used;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.6.1.12 |
mcmFrSVCMapExcessRxBurstSizeNAME = ;
DESC = Excess receive burst size in bytes;
HELP = Uncommitted transmit burst size, \
in bytes, to negotiate with the \
remote. This value will override \
default values entered for the \
network. A value of 0 indicates \
the network default values are to \
be used;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.6.1.13 |
mcmFrSVCMapPriorityNAME = ;
DESC = Transfer priority level for data on \
this SVC;
HELP = All data on this SVC will be sent \
through the switches at \
the requested transfer priority level;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.6.1.14 |
mcmFrSVCMapEntryStatusNAME = ;
DESC = Indicates whether or not this entry is \
enabled;
HELP = Enabled indicates this entry will be used \
to establish an SVC connection. Disabled \
indicates this entry is to be ignored when \
establishing SVC connections. This allows \
these SVCs entries to be disabled/enabled \
without having to reenter the entire entry;
CAPABILITIES = ;ro Enumeration .micom-oscar.7.1.6.1.15 |
mcmFrSVCMapTransferPriorityNAME = ;
DESC = The transfer priority for the corresponding \
pass-through network connection.;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.6.1.16 |
mcmFrSVCMapDisableCauseNAME = ;
DESC = The cause code describing the reason that \
the SVC was not established.; \
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.7.1.6.1.17 |
mcmFrSvcMapSvcIfIndexNAME = ;
DESC = For Software releases beginning with R3.0, \
this object indicates the ifIndex of the tunneling \
PVC in which the SVC is established. Prior to \
R3.0, this object indicates the physical Interface \
this SVC DLCI is associated with.;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.6.1.18 |
mcmFrSVCMapDiscardPriorityNAME = ;
DESC = The discard priority used for connection \
setup of this SVC map.;
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.7.1.6.1.19 |
mcmFrSVCMapSetupPriorityNAME = ;
DESC = This object indicates the priority of a path at \
call-establishment time, and also determines \
the potential for bumping established paths \
to acquire their bandwidth. A value of 1 is \
the highest priority, and 5 is the lowest.;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.6.1.20 |
mcmFrSVCMapHoldingPriorityNAME = ;
DESC = This object indicates the priority that a path \
maintains once the path is established, and \
also determines the likelihood of being bumped \
by a new path, thus losing the bandwidth. A value \
of 1 is the highest priority, and 5 is the lowest.;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.6.1.21 |
mcmFrPVCMapTableNAME = ;
DESC = This table has been OBSOLETED for software \
releases beginning with Release 3.0. \
Table for PVC to VP bindings;
HELP = This table will give the PVC \
DLCI address to be bound to the \
specified Virtual Port;
CAPABILITIES = NET_CFG, VPN_DISP;obsolete SEQUENCE OF McmFrPVCMapEntry .micom-oscar.7.1.7 |
mcmFrPVCMapEntryNAME = ;
DESC = Entry in the PVC to VP binding \
table;
HELP = PVC/VP binding entry in the PVC \
binding table. Multiple PVCs \
(DLCIs) may be bound to a single \
VP (ifindex).;
CAPABILITIES = ;obsolete McmFrPVCMapEntry .micom-oscar.7.1.7.1 |
mcmFrPVCMapVirtualPortIfIndexNAME = ;
DESC = Virtual port ifIndex associated \
with this PVC DLCI;
HELP = ;
CAPABILITIES = ;roobsolete INTEGER .micom-oscar.7.1.7.1.1 |
mcmFrPVCMapDLCINAME = ;
DESC = Local DLCI to the remote that is \
associated with the corresponding \
virtual port;
HELP = A DLCI for any given interface \
may be bound to only one virtual \
port;
CAPABILITIES = ;roobsolete INTEGER .micom-oscar.7.1.7.1.2 |
mcmFrPVCMapStateNAME = ;
DESC = Indicates the current state of \
the PVC DLCI;
HELP = States may be invalid, active or \
inactive;
CAPABILITIES = ;roobsolete Enumeration .micom-oscar.7.1.7.1.3 |
mcmFrPVCMapEntryStatusNAME = ;
DESC = Indicates whether or not this entry is \
enabled;
HELP = Enabled indicates this entry will be used \
to associate a PVC DLCI with a virtual \
port. Disable indicates this entry is to \
be ignored when mapping PVC dlcis to \
virtual ports. This allows the PVC map \
entries to be disabled/enabled without \
having to reenter the entire entry;
CAPABILITIES = ;roobsolete Enumeration .micom-oscar.7.1.7.1.4 |
mcmFrPVCMapPhysIfIndexNAME = ;
DESC = Physical interface this PVC \
is associated with.;
HELP = ;
CAPABILITIES = ;roobsolete INTEGER .micom-oscar.7.1.7.1.5 |
mcmFrSVCCircuitTableNAME = ;
DESC = Table of entries for SVCs on this \
access device;
HELP = A table containing information \
about specific SVC Data Link \
Connection Identifiers;
CAPABILITIES = NET_CFG, VPN_DISP; SEQUENCE OF McmFrCircuitEntry .micom-oscar.7.1.8 |
mcmFrSVCCircuitEntryNAME = ;
DESC = The information regarding a \
single SVC DLCI circuit;
HELP = An entry into the SVC circuit \
table;
CAPABILITIES = ; McmFrCircuitEntry .micom-oscar.7.1.8.1 |
mcmFrSVCCircuitIfIndexNAME = ;
DESC = The ifIndex Value of the ifEntry \
this SVC virtual circuit is
linked with;
HELP = The ifIndex for the interface on \
which this PVC belongs;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.8.1.1 |
mcmFrSVCCircuitDNANAME = ;
DESC = The destination DNA for the SVC;
HELP = ;
CAPABILITIES = ;ro OCTET STRING .micom-oscar.7.1.8.1.2 |
mcmFrSVCCircuitDlciNAME = ;
DESC = The Data Link Connection Identifier \
for this virtual circuit;
HELP = The local DLCI for this SVC, valid \
only when the connection has been \
established;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.8.1.3 |
mcmFrSVCCircuitStateNAME = ;
DESC = Indication for the state of this SVC (active \
or inactive).
HELP = Only the configured SVCs can be in \
the inactive state (all learned \
SVCs will be deleted when the connection \
has been released);
CAPABILITIES = ;ro Enumeration .micom-oscar.7.1.8.1.4 |
mcmFrSVCCircuitReceivedFECNsNAME = ;
DESC = Number of frames received from \
the network indicating forward \
congestion.;
HELP = Number of Frame Relay Packets \
received on the corresponding \
DLCI with the Forward congestion \
bit set since this SVC was created;
CAPABILITIES = ;ro Counter .micom-oscar.7.1.8.1.5 |
mcmFrSVCCircuitReceivedBECNsNAME = ;
DESC = Number of frames received from \
the network indicating backward \
congestion;
HELP = Number of Frame Relay Packets received \
on the corresponding interface with the \
backwards congestion bit set since this \
SVC was created.;
CAPABILITIES = ;ro Counter .micom-oscar.7.1.8.1.6 |
mcmFrSVCCircuitSentFramesNAME = ;
DESC = The number of frames sent from \
this switched virtual circuit \
since this was counter was last \
reset;
HELP = Number of Frame Relay Packets sent \
on the corresponding SVC since this \
counter was last reset (either by \
reboot of access device or a counter reset \
initiated by a user...Note that user initiated \
counter resets have been OBSOLETED for \
software releases beginning with Release 3.0.);
CAPABILITIES = ;ro Counter .micom-oscar.7.1.8.1.7 |
mcmFrSVCCircuitSentOctetsNAME = ;
DESC = The number of octets sent from \
this switched virtual circuit since \
it was last created or reset;
HELP = Number of bytes sent on the \
corresponding SVC since this counter \
was last reset (either by reboot of access device \
or a counter reset initiated by a user...Note that \
user initiated counter resets have been OBSOLETED \
for software releases beginning with Release 3.0.);
CAPABILITIES = ;ro Counter .micom-oscar.7.1.8.1.8 |
mcmFrSVCCircuitReceivedFramesNAME = ;
DESC = Number of frames received over \
this virtual circuit since it \
was created or the counter was \
last reset;
HELP = Number of Frame Relay Packets received \
on the corresponding SVC since this \
counter was last reset (either by reboot \
or a counter reset initiated by a user...Note that \
user initiated counter resets have been OBSOLETED \
for software releases beginning with Release 3.0.);
CAPABILITIES = ;ro Counter .micom-oscar.7.1.8.1.9 |
mcmFrSVCCircuitReceivedOctetsNAME = ;
DESC = Number of octets received over \
this virtual circuit since it \
was created or the counter was \
last reset;
HELP = Number of octets received \
on the corresponding SVC since this \
counter was last reset (either by reboot \
or a counter reset initiated by a user...Note that \
user initiated counter resets have been OBSOLETED \
for software releases beginning with Release 3.0.);
CAPABILITIES = ;ro Counter .micom-oscar.7.1.8.1.10 |
mcmFrSVCCircuitCreationTimeNAME = ;
DESC = The value of sysUpTime when the \
switched virtual circuit was \
created.;;
HELP = The sysUpTime when the SVC was created \
either at bootup time or when the SVC \
was set up through Q.933, whether by the \
Data Link Connection Management Interface or \
by a SetRequest;
CAPABILITIES = ;ro TimeTicks (SNMPv2-SMI) .micom-oscar.7.1.8.1.11 |
mcmFrSVCCircuitCallOriginatorNAME = ;
DESC = DNA of the SVC call originator.;
HELP = DNA of the node that originated \
the call that resulted in \
the establishment of the SVC;
CAPABILITIES = ;ro OCTET STRING .micom-oscar.7.1.8.1.12 |
mcmFrSVCCircuitLastTimeChangeNAME = ;
DESC = The value of sysUpTime when the state \
of the SVC last changed.;
HELP = The sysUpTime of the last status change \
in the SVC. (For SVCs established by the \
remote, the last time change should be \
equal to the SVC creation time);
CAPABILITIES = ;ro TimeTicks (SNMPv2-SMI) .micom-oscar.7.1.8.1.13 |
mcmFrSVCCircuitCommittedBurstNAME = ;
DESC = *******NOTE: THIS OBJECT IS DEPRECATED******* \
This information is redundant. It has been
replaced by mcmFrSVCCircuitNedTxThroughput and
mcmFrCircuitNexRxThroughput which are objects \
from this same table(mcmFrSVCCircuitTable).;\
Maximum amount of data that the network agrees \
transfer under normal conditions over a set \
measurement interval.;
HELP = The maximum rate at which the network \
agrees to transfer under normal (non- \
congested) conditions (expressed in bits \
per second).;
CAPABILITIES = ;rodeprecated INTEGER .micom-oscar.7.1.8.1.14 |
mcmFrSVCCircuitExcessBurstNAME = ;
DESC = *******NOTE: THIS OBJECT IS DEPRECATED*******\
This information is redundant. It has been
replaced by mcmFrSVCCircuitNegTxExceess and \
and mcmFrSVCCircuitNegRxExceess which are objects \
from this same table.(mcmFrSVCCircuitTable);\
The maximum number of uncommited bits \
that the frame relay network will attempt \
to deliver (expressed in bits per second).; \
HELP = This variable indicates the maximum \
amount of uncommitted data bits \
that the network will attempt to \
deliver over the measurement interval. \
By default, if not configured when \
creating the entry, the Excess \
information Burst Size is set \
to the value of ifSpeed;
CAPABILITIES = ;rodeprecated INTEGER .micom-oscar.7.1.8.1.15 |
mcmFrSVCCircuitThroughputNAME = ;
DESC = The average number of 'Frame Relay \
Information Field' bits transferred \
per second across a physical frame relay \
interface.;
HELP = Throughput is the average number of \
'Frame Relay Information Field' \
bits transferred per second across a \
user network interface in one \
direction, measured over the \
measurement interval. If the configured \
commited burst rate and throughput \
are both non-zero, the measurement interval \
T=mcmFrSVCCircuitCommittedBurst/mcmFrSVC- \
CircuitThroughput. If the configured \
committed burst rate and throughput are \
both zero, the measurement interval\
T=mcmFrSVCCircuitExcessBurst/ifSpeed;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.8.1.16 |
mcmFrSVCCircuitNegMaxTxSizeNAME = ;
DESC = The negotiated maximum Tx size to \
be sent on this interface (in bytes).;
HELP =;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.8.1.17 |
mcmFrSVCCircuitNegMaxRxSizeNAME = ;
DESC = The negotiated maximum Rx size to \
be received on this interface (in bytes).;
HELP =;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.8.1.18 |
mcmFrSVCCircuitNegTxThroughputNAME = ;
DESC = The negotiated Tx throughput to \
be sent on this interface (in bits/sec).;
HELP =;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.8.1.19 |
mcmFrSVCCircuitNegRxThroughputNAME = ;
DESC = The negotiated Rx throughput to \
be received on this interface (in bits/sec).;
HELP =;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.8.1.20 |
mcmFrSVCCircuitNegTxBurstNAME = ;
DESC = The negotiated Tx committed burst to \
be sent on this interface (in bits/sec).;
HELP =;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.8.1.21 |
mcmFrSVCCircuitNegRxBurstNAME = ;
DESC = The negotiated Rx committed burst to \
be received on this interface (in bits/sec).;
HELP =;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.8.1.22 |
mcmFrSVCCircuitNegTxExcessNAME = ;
DESC = The negotiated Tx excess burst to \
be sent on this interface (in bits/sec).;
HELP =;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.8.1.23 |
mcmFrSVCCircuitNegRxExcessNAME = ;
DESC = The negotiated Rx excess burst to \
be received on this interface (in bits/sec).;
HELP =;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.8.1.24 |
mcmFrSVCCircuitTxDiscardCIRPoliceNAME = ;
DESC = The number of packets that have been discarded \
due to policing of the CIR.;
HELP =;
CAPABILITIES = ;ro Counter .micom-oscar.7.1.8.1.25 |
mcmFrSVCCircuitPriorityNAME = ;
DESC = The transfer priority used for connection \
setup of this SVC.;
HELP =;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.8.1.26 |
mcmFrSVCCircuitSvcIfIndexNAME = ;
DESC = For Software releases beginning with R3.0, \
this object indicates the ifIndex of the tunneling \
PVC in which the SVC is established. Prior to \
R3.0, this object indicates the physical interface \
this SVC DLCI is assoiciated with.;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.8.1.27 |
mcmFrSVCCircuitDiscardPriorityNAME = ;
DESC = The discard priority used for SVC circuit \
connection setup of this SVC map.;
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.7.1.8.1.28 |
mcmFrSVCCircuitSetupPriorityNAME = ;
DESC = This object indicates the priority of a path at \
call-establishment time, and also determines \
the potential for bumping established paths \
to acquire their bandwidth. A value of 1 is \
the highest priority, and 5 is the lowest.;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.8.1.29 |
mcmFrSVCCircuitHoldingPriorityNAME = ;
DESC = This object indicates the priority that a path \
maintains once the path is established, and \
also determines the likelihood of being bumped \
by a new path, thus losing the bandwidth. A value \
of 1 is the highest priority, and 5 is the lowest.;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.8.1.30 |
nvmFrGlobalGroup OBJECT IDENTIFIER .micom-oscar.7.1.9 |
nvmFrMaxDLCINAME = ;
DESC = The maximum number of DLCI that \
may be configured for the entire \
access device;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;rw INTEGER .micom-oscar.7.1.9.1 |
nvmFrMaxVirtualPortsNAME = ;
DESC = The maximum number of ports that \
may be configured for the entire \
access device;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;rw INTEGER .micom-oscar.7.1.9.2 |
nvmFrMaxDlciPerLineNAME = ;
DESC = The maximum number of DLCIs that may \
be configured for a Frame Relay line;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;rw INTEGER .micom-oscar.7.1.9.3 |
nvmFrDNANumberingPlanNAME = ;
DESC = The value of this object designates the \
numbering plan of the DNA;
HELP = The number plan is used in conjunction \
with a DNA. This object identifies the \
type of call as E.164 or X.121;
CAPABILITIES = NET_CFG, VPN_DISP;rw Enumeration .micom-oscar.7.1.9.4 |
nvmFrPanlLmiTrapEnableNAME = ;
DESC = This object specifies whether the generation of \
Trap messages are enabled/disabled for the FR \
PANL LMI module.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;rw Enumeration .micom-oscar.7.1.9.5 |
nvmFrMsmTrapEnableNAME = ;
DESC = This object specifies whether the generation of \
Trap messages are enabled/disabled for the FR \
MSM module.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;rw Enumeration .micom-oscar.7.1.9.6 |
nvmFrCoreTrapEnableNAME = ;
DESC = This object specifies whether the generation of \
Trap messages are enabled/disabled for the FR \
Core module.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;rw Enumeration .micom-oscar.7.1.9.7 |
nvmFrPlmTrapEnableNAME = ;
DESC = This object specifies whether the generation of \
Trap messages are enabled/disabled for the FR \
Plm module.;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;rw Enumeration .micom-oscar.7.1.9.8 |
nvmFrPhyPortTableNAME = ;
DESC = Table of physical port entries \
contianing flow control info and \
statistics;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP; SEQUENCE OF NvmFrPhyPortEntry .micom-oscar.7.1.10 |
nvmFrPhyPortEntryNAME = ;
DESC = Entry for a Frame Relay physical \
port;
HELP = Entry for a Frame Relay physical \
port, containing flow control \
information and statistics NOT \
included in the RFC 1315 mib;
CAPABILITIES = ; NvmFrPhyPortEntry .micom-oscar.7.1.10.1 |
nvmFrPhyPortExtIfIndexNAME = ;
DESC = IfIndex of the physical port the \
extention information (this entry) \
is associated with;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.10.1.1 |
nvmFrPhyPortFlowControlNAME = Frame Relay Flow Control;
DESC = Whether or not policing, based on \
congestion should be enforced;
HELP = Enabling this feature will allow packets \
exceeding the current allowable rate \
to be dropped if congestion has been \
detected on the network.;
CAPABILITIES = ;rw Enumeration .micom-oscar.7.1.10.1.2 |
nvmFrPhyPortThroughputNAME = Frame Relay DLCI Throughput;
DESC = This object has been DEPRECATED for software \
releases beginning with Release 3.0, and replaced with \
new objects TxThroughput, RxThroughput. \
Default throughput for a PVC;
HELP = Defalut throughput used for all \
PVCs on the same frame relay \
physical interface. Will be \
assigned to a PVC when the PVC \
is created. valid if flow cntl \
is enabled ;
CAPABILITIES = ;rwdeprecated INTEGER .micom-oscar.7.1.10.1.3 |
nvmFrPhyPortDeltaNAME = Frame Relay Delta;
DESC = Delta time interval to increase or \
decrease the transmit rate by \
monitoring the number of frames \
received with the FECN bit cleared \
or set. Note that for software releases \
beginning with R3.0, the range has been \
expanded from (1..100) to (1..255).;
HELP = Typically 4 types end-to-end \
transit delay. Used only if flow \
control is enabled. (In 1 second \
units.) Valid if flow cntl is enabled;
CAPABILITIES =;rw INTEGER .micom-oscar.7.1.10.1.4 |
nvmFrPhyPortConsectiveFramesNAME = ;
DESC = Number of consecutive frames received \
with the BECN bit set before reducing \
the transmit rate;
HELP = Transmit rate is increased \
when S/2 consecutive frames \
are received with teh BECN bit cleared. \
Valid only when flow control is enabled.\
See CCITT Q.922 Appendix I, for the \
method to compute parameter S.;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.10.1.5 |
nvmFrPhyPortMtuSizeNAME = ;
DESC = This object has been DEPRECATED for software \
releases beginning with Release 3.0, and replaced with \
new objects TxMaxFrameSize, RxMaxFrameSize. \
Maximum Transmission Unit Size;
HELP = Maximum Packet size that can be \
passed to frame Relay and will \
be sent across the Frame Relay \
network.;
CAPABILITIES = ;rwdeprecated INTEGER .micom-oscar.7.1.10.1.6 |
nvmFrPhyPortTxThroughputNAME = Frame Relay DLCI Tx Throughput;
DESC = The transmission CIR expressed in bits/sec.;
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.10.1.7 |
nvmFrPhyPortRxThroughputNAME = Frame Relay DLCI Rx Throughput;
DESC = The receive CIR expressed in bits/sec.;
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.10.1.8 |
nvmFrPhyPortTxMaxFrameSizeNAME = ;
DESC = The maximum transmission FR packet size \
expressed in bytes.;
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.10.1.9 |
nvmFrPhyPortRxMaxFrameSizeNAME = ;
DESC = The maximum receive FR packet size \
expressed in bytes.;
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.10.1.10 |
nvmFrPhyPortRateEnfNAME = ;
DESC = The rate enforcement enabled or disabled \
parameter for FR congestion management \
processing.;
HELP = ;
CAPABILITIES = ;rw Enumeration .micom-oscar.7.1.10.1.11 |
nvmFrPhyPortTxBcNAME = ;
DESC = The transmission committed burst size \
expressed in bits.;
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.10.1.12 |
nvmFrPhyPortRxBcNAME = ;
DESC = The receive committed burst size \
expressed in bits.;
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.10.1.13 |
nvmFrPhyPortTxBeNAME = ;
DESC = The transmission excess burst size \
expressed in bits.;
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.10.1.14 |
nvmFrPhyPortRxBeNAME = ;
DESC = The receive excess burst size \
expressed in bits.;
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.10.1.15 |
nvmFrPVCPhyTableNAME = ;
DESC = Table that extends the RFC 1315 \
DLCMI table contianing info \
about the PVC LMI;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP; SEQUENCE OF NvmFrPVCPhyEntry .micom-oscar.7.1.11 |
nvmFrPVCPhyEntryNAME = ;
DESC = Entry into the micom PVC LMI \
configuration extensions;
HELP = Entry in the PVC Phys Table. \
Additional information required \
(not in RFC 1315 DLCI table);
CAPABILITIES = ; NvmFrPVCPhyEntry .micom-oscar.7.1.11.1 |
nvmFrPVCPhyIfIndexNAME = ;
DESC = IfIndex of the physical port \
the extension information \
is associated with;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.11.1.1 |
nvmFrPVCLMIModeNAME = ;
DESC = Indicates whether the local PVC \
LMI is performing in the DTE or \
DCE mode;
HELP = DTE or DCE mode of operation for \
the Frame Relay PVC LMI. (In DTE \
mode the Status Enquiry messages \
will be sent. In DCE mode, Status \
Reports will be sent in response \
to Status Enquiry mesages.;
CAPABILITIES = ;rw Enumeration .micom-oscar.7.1.11.1.2 |
nvmFrPVCBiDirNAME = ;
DESC = Indicates whether the PVC LMI \
should perform both sending \
status enquiries and sending \
status reports;
HELP = Must be with bilateral agreement \
with the switch enabled. Switch \
may send status enquiry messages \
as defined for the DTEs and allows \
the DTE to respond with a status \
messages in the same way as switch \
does (in this mode Status Enquiries \
will still be transmitted normally;
CAPABILITIES = ;rw Enumeration .micom-oscar.7.1.11.1.3 |
nvmFrSVCPhyTableNAME = ;
DESC = Table containing the SVC default \
parameters ;
HELP = Table containing default SVC \
parameters to be used if none \
are specified when configuring \
an SVC;
CAPABILITIES = NET_CFG, VPN_DISP; SEQUENCE OF NvmFrSVCPhyEntry .micom-oscar.7.1.12 |
nvmFrSVCPhyEntryNAME = ;
DESC = Entry into the SVC Default\
parameter table;
HELP = Each entry contains the default \
SVC parameters for the specified \
interface;
CAPABILITIES = ; NvmFrSVCPhyEntry .micom-oscar.7.1.12.1 |
nvmFrSVCPhyIfIndexNAME = ;
DESC = IfIndex of the physical port \
the SVC information is \
associated with;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.12.1.1 |
nvmFrSVCStateNAME = ;
DESC = SVC LMI Protocol to be used;
HELP = SVC LMI Protocol to be used \
on this interface. (All \
SVC connection setup must \
use the same protocol);
CAPABILITIES = ;rw Enumeration .micom-oscar.7.1.12.1.2 |
nvmFrSVCT303NAME = ;
DESC = The duration, in seconds, \
of the setup timer for SVCs. \
;
HELP = How long the SVC LMI will wait \
for a response from the network \
(e.g. call proceeding, connect) \
before the setup message will be \
retransmitted. In 1 second unit. \
Q.931 recommends 4 seconds. Causes at \
most one Setup retransmission;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.12.1.3 |
nvmFrSVCT305NAME = ;
DESC = The duration of the Disconnect \
timer (in seconds) for SVCs.;
HELP = How long the SVC LMI will wait \
for a release message from the \
network before it will transmit \
a release message. (The SVC LMI \
will then wait for a release \
message from the network.) In 1 second \
unit. Q.931 recommends 30 seconds.\
Causes at most one release \
transmit;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.12.1.4 |
nvmFrSVCT308NAME = ;
DESC = The duration of Release timer. ;
HELP = How long the SVC LMI will wait \
for a response from the network \
before the release message will \
be retransmitted. (When the \
second release is transmitted, \
the local SVC LMI considers \
the corresponding SVC to have \
been released by the network \
as well - even if no response \
is received.) In 1 second unit. \
Q.931 recommends 4 seconds. \
Causes at most one release transmit;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.12.1.5 |
nvmFrSVCT310NAME = ;
DESC = The duration of Connect Timer.;
HELP = How long the SVC LMI will wait \
(in seconds) for a Connect message \
(after receiving the Call Proceeding \
message) before sending a Release \
message. In 1 second units. Q.931 \
recommends a duration between 30\
to 120 seconds on the DTE side and \
10 seconds on the DCE side
Causes connection disconnection;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.12.1.6 |
nvmFrSVCMaxCallsNAME = ;
DESC = Maximum number of SVC Connections;
HELP = For all SVCs, including both \
incoming and outgoing;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.12.1.7 |
nvmFrSVCMaxTxSizeNAME = ;
DESC = Default Maximum transmit frame size, \
in bytes, to negotiate with the remote;
HELP = This value will be used only if a \
specific value is not included in the \
Connect Request primitive. A value of \
0 indicates the network default values \
are to be used (unless it is passed down \
at connect time). Expressed in bytes.
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.12.1.8 |
nvmFrSVCMaxRxSizeNAME = ;
DESC = Maximum receive frame size in bytes;
HELP = Default value for the maximum receive \
frame size to negotiate with the remote \
This value will be used only if a \
specific value is not included in the \
Connect Request primitive. A value of \
0 indicates the network default values \
are to be used (unless it is passed down \
at connect time). Expressed in bytes.
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.12.1.9 |
nvmFrSVCMinDLCINAME = ;
DESC = Lowest DLCI value for SVCs on \
this network;
HELP = This value applies only to SVC connections. \
PVC DLCI connections may be established \
above or below this value.;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.12.1.10 |
nvmFrSVCMaxDLCINAME = ;
DESC = Highest DLCI value for SVCs on \
the this network;
HELP = This value applies only to SVC connections. \
PVC DLCI connections may be established \
above or below this value.;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.12.1.11 |
nvmFrSVCMinTxThroughputNAME = ;
DESC = Minimum transmit throughput in \
bits per seconds;
HELP = Minimum transmit throughput in \
bits per second, to negotiate with \
the remote (used along with the \
maximum transmit throughput) \
unless overwritten at connect time. \
A value of 0 indicates the network \
default values are to be used;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.12.1.12 |
nvmFrSVCMinRxThroughputNAME = ;
DESC = Minimum receive throughput in \
bits per seconds;
HELP = To negotiate with the remote when used with the \
maximum receive throughput \
unless overwritten at connect time. \
A value of 0 indicates the network \
default values are to be used;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.12.1.13 |
nvmFrSVCMaxTxThroughputNAME = ;
DESC = Maximum transmit throughput in \
bits per seconds;
HELP = To negotiate with the remote when used with the \
minimum transmit throughput \
unless overwritten at connect time. \
A value of 0 indicates the network \
default values are to be use;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.12.1.14 |
nvmFrSVCMaxRxThroughputNAME = ;
DESC = Maximum receive throughput in \
bits per seconds;
HELP = To negotiate with the remote when used with the \
minimum receive throughput \
unless overwritten at connect time. \
A value of 0 indicates the network \
default values are to be used;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.12.1.15 |
nvmFrSVCTxBurstSizeNAME = ;
DESC = Transmit burst size in bytes;
HELP = Default Committed Transmit burst \
size, in bytes, to negotiate with \
the remote unless overwritten at \
connect time. A value of 0 \
indicates the network default \
values are to be used;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.12.1.16 |
nvmFrSVCRxBurstSizeNAME = ;
DESC = Receive burst size in bytes;
HELP = Default Committed Receive burst \
size, in bytes, to negotiate with \
the remote unless overwritten at \
connect time. A value of 0 \
indicates the network default \
values are to be used;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.12.1.17 |
nvmFrSVCExcessTxBurstSizeNAME = ;
DESC = Excess transmit burst size in bytes;
HELP = Default Uncommitted Transmit burst \
size, in bytes, to negotiate with \
the remote unless overwritten at \
connect time. A value of 0 \
indicates the network default \
values are to be used;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.12.1.18 |
nvmFrSVCExcessRxBurstSizeNAME = ;
DESC = Excess receive burst size in bytes;
HELP = Default Uncommitted Receive burst \
size, in bytes, to negotiate with \
the remote unless overwritten at \
connect time. A value of 0 \
indicates the network default \
values are to be used;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.12.1.19 |
nvmFrVirtualPortTableNAME = ;
DESC = Table to provide the mapping between \
virtual ports and physical ports \
and to define the virtual port \
parameters;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP; SEQUENCE OF NvmFrVirtualPortEntry .micom-oscar.7.1.13 |
nvmFrVirtualPortEntryNAME = ;
DESC = Each entry in this table contains \
information to define a virtual \
port;
HELP = ;
CAPABILITIES = ; NvmFrVirtualPortEntry .micom-oscar.7.1.13.1 |
nvmFrVirtualPortIfIndexNAME = Virtual Port Interface Number;
DESC = IfIndex associated with this port;
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.13.1.1 |
nvmFrVirtualPortPhyPortIfIndexNAME = ;
DESC = *******NOTE: THIS OBJECT IS OBSOLETE*******
This information is no longer useful for \
virtual ports. The virtual ports no longer \
have an underlying network. Only SVC DNAs \
and PVC DLCIs are associated with VPs now. \
The underlying MPANL will take care of which \
link the SVC is to be made on and a Physical \
Line IfIndex has been added to the PVCs. VP \
are no longer required to provide the backup \
link support (MPANL now does that).\
IfIndex of the Frame Relay physical \
port for which the virtual port is \
(or will be) linked to;
HELP = ;
CAPABILITIES = ;rwobsolete INTEGER .micom-oscar.7.1.13.1.2 |
nvmFrVirtualPortPPANAME = This object has been OBSOLETED for software \
releases beginning with Release 3.0. \
Virtual Port PPA Number;
DESC = Point of Physical attachment for \
this port;
HELP = ;
CAPABILITIES = ;rwobsolete INTEGER .micom-oscar.7.1.13.1.3 |
nvmFrVirtualPortModeNAME = Virtual Port Mode;
HELP = Mode of the virtual port;
DESC = Easy Routing requires that data \
will be switched between the \
Virtual Circuits on the this \
virutal port. Basic mode turns \
off the switching mode;
CAPABILITIES = ;rw Enumeration .micom-oscar.7.1.13.1.4 |
nvmFrVirtualPortEntryStatusNAME = Virtual Port Mode;
DESC = Virtual port row status;
HELP = Indicates whether or not this \
entry is valid;
CAPABILITIES = ;rw Enumeration .micom-oscar.7.1.13.1.5 |
nvmFrVirtualPortProtocolBindingNAME = ;
DESC = Bitmap that contains the protocols bound. \
to this Virtual Port;
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.7.1.13.1.6 |
nvmFrVirtualPortNumberNAME = ;
DESC = This object specifies the Virtual \
Port Number used as an identifier \
for a Virtual Port. (Configuration);
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.13.1.7 |
nvmFrSVCMapTableNAME = ;
DESC = Table for SVC to VP bindings;
HELP = This table will give the SVC \
DNA address to be bound to the \
specified Virtual Port;
CAPABILITIES = NET_CFG, VPN_DISP; SEQUENCE OF NvmFrSVCMapEntry .micom-oscar.7.1.14 |
nvmFrSVCMapEntryNAME = ;
DESC = Entry in the SVC to VP binding \
table;
HELP = SVC/VP binding entry in the SVC \
binding table. Multiple SVCS \
(DNAs) may be bound to a single \
VP (ifindex);
CAPABILITIES = ; NvmFrSVCMapEntry .micom-oscar.7.1.14.1 |
nvmFrSVCMapVirtualPortIfIndexNAME = ;
DESC = Virtual Port ifIndex associated \
with this DNA;
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.14.1.1 |
nvmFrSVCMapDNANAME = ;
DESC = Remote DNA to associate with \
the corresponding virtual port;
HELP = DNA to be mapped to the \
corresponding virtual port. \
This will be used to create \
an SVC to the corresponding \
remote DNA;
CAPABILITIES = ;rw OCTET STRING .micom-oscar.7.1.14.1.2 |
nvmFrSVCMapMaxTxSizeNAME = ;
DESC = Maximum transmit frame size to \
negotiate with the remote (in \
bytes);
HELP = This value will override the default values for \
the physical interface. A value \
of 0 indicates the networks default \
values are to be used. Experessed in \
bytes;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.14.1.3 |
nvmFrSVCMapMaxRxSizeNAME = ;
DESC = Maximum receive frame size to \
negotiate with the remote (in \
bytes);
HELP = This value will override the default values for \
the physical interface. A value \
of 0 indicates the networks default \
values are to be used. Experessed in \
bytes;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.14.1.4 |
nvmFrSVCMapMinTxThroughputNAME = ;
DESC = Minimum transmit throughput in \
bits per second;
HELP = Used with the maximum transmit throughput. \
This value will override default \
values given for this physical \
interface. A value of 0 indicates \
the network default values are to \
be used;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.14.1.5 |
nvmFrSVCMapMinRxThroughputNAME = ;
DESC = Minimum receive throughput in \
bits per second;
HELP = Used with the maximum receive throughput. \
This value will override default \
values given for this physical \
interface. A value of 0 indicates \
the network default values are to \
be used;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.14.1.6 |
nvmFrSVCMapMaxTxThroughputNAME = ;
DESC = Maximum transmit throughput in \
bits per second;
HELP = Used with the minimum transmit throughput. \
This value will override default \
values given for this physical \
interface. A value of 0 indicates \
the network default values are to \
be used;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.14.1.7 |
nvmFrSVCMapMaxRxThroughputNAME = ;
DESC = Maximum receive throughput in \
bits per second;
HELP = Used with the minimum receive throughput. \
This value will override default \
values given for this physical \
interface. A value of 0 indicates \
the network default values are to \
be used;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.14.1.8 |
nvmFrSVCMapTxBurstSizeNAME = ;
DESC = Transmit burst size in bytes;
HELP = Committed transmit busrt size, \
in bytes, to negotiate with the \
remote. This value will override \
default values entered for the \
network. A value of 0 indicates \
the network default values are to \
be used;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.14.1.9 |
nvmFrSVCMapRxBurstSizeNAME = ;
DESC = Receive burst size in bytes;
HELP = Committed receive busrt size, \
in bytes, to negotiate with the \
remote. This value will override \
default values entered for the \
network. A value of 0 indicates \
the network default values are to \
be used;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.14.1.10 |
nvmFrSVCMapExcessTxBurstSizeNAME = ;
DESC = Excess transmit burst size in bytes;
HELP = Uncommitted transmit busrt size, \
in bytes, to negotiate with the \
remote. This value will override \
default values entered for the \
network. A value of 0 indicates \
the network default values are to \
be used;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.14.1.11 |
nvmFrSVCMapExcessRxBurstSizeNAME = ;
DESC = Excess receive burst size in bytes;
HELP = Uncommitted transmit busrt size, \
in bytes, to negotiate with the \
remote. This value will override \
default values entered for the \
network. A value of 0 indicates \
the network default values are to \
be used;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.14.1.12 |
nvmFrSVCMapPriorityNAME = ;
DESC = Transfer priority level for data on \
this SVC;
HELP = All data on this SVC will be sent \
through the switches at \
the requested transfer priority level;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.14.1.13 |
nvmFrSVCMapEntryStatusNAME = ;
DESC = Indicates whether or not this entry is \
enabled;
HELP = Enabled indicates this entry will be used \
to establish an SVC connection. Disabled \
indicates this entry is to be ignored when \
establishing SVC connections. This allows \
these SVCs entries to be disabled/enabled \
without having to reenter the entire entry;
CAPABILITIES = ;rw Enumeration .micom-oscar.7.1.14.1.14 |
nvmFrSVCMapTransferPriorityNAME = ;
DESC = The transfer priority for the corresponding \
pass-through connection. (Configuration);
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.14.1.15 |
nvmFrSVCMapRowStatusNAME = ;
DESC = This object is used to add new rows \
in the SVC to VP bindings table, modify existing \
rows,and to delete existing rows (Configuration);
HELP = To add a new row, createAndGo (4) is used. \
To modify an existing row, active (1) is \
used. To delete an existing row, \
destroy (6) is used. ;
CAPABILITIES = ;rw Enumeration .micom-oscar.7.1.14.1.16 |
nvmFrSVCMapDiscardPriorityNAME = ;
DESC = The discard priority used for connection \
setup of this SVC map.;
HELP = ;
CAPABILITIES = ;rw Enumeration .micom-oscar.7.1.14.1.17 |
nvmFrSVCMapSetupPriorityNAME = ;
DESC = This object specifies the priority of a path at \
call-establishment time, and also determines \
the potential for bumping established paths \
to acquire their bandwidth. A value of 1 is \
the highest priority, and 5 is the lowest.;
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.14.1.18 |
nvmFrSVCMapHoldingPriorityNAME = ;
DESC = This object specifies the priority that a path \
maintains once the path is established, and \
also determines the likelihood of being bumped \
by a new path, thus losing the bandwidth. A value \
of 1 is the highest priority, and 5 is the lowest.;
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.14.1.19 |
nvmFrPVCMapTableNAME = ;
DESC = This table has been OBSOLETED for software \
releases beginning with Release 3.0. \
Table for PVC to VP bindings;
HELP = This table will give the PVC \
DLCI address to be bound to the \
specified Virtual Port;
CAPABILITIES = NET_CFG, VPN_DISP;obsolete SEQUENCE OF NvmFrPVCMapEntry .micom-oscar.7.1.15 |
nvmFrPVCMapEntryNAME = ;
DESC = Entry in the PVC to VP binding \
table;
HELP = PVC/VP binding entry in the PVC \
binding table. Multiple PVCs \
(DLCIs) may be bound to a single \
VP (ifindex).;
CAPABILITIES = ;obsolete NvmFrPVCMapEntry .micom-oscar.7.1.15.1 |
nvmFrPVCMapVirtualPortIfIndexNAME = ;
DESC = Virtual port ifIndex associated \
with this PVC DLCI;
HELP = ;
CAPABILITIES = ;rwobsolete INTEGER .micom-oscar.7.1.15.1.1 |
nvmFrPVCMapDLCINAME = ;
DESC = Local DLCI to the remote that is \
to be associated with the \
corresponding virtual port;
HELP = A DLCI for any given interface \
may be bound to only one virtual \
port;
CAPABILITIES = ;rwobsolete INTEGER .micom-oscar.7.1.15.1.2 |
nvmFrPVCMapEntryStatusNAME = ;
DESC = Indicates whether or not this entry is \
enabled;
HELP = Enabled indicates this entry will be used \
to associate a PVC DLCI with a virtual \
port. Disable indicates this entry is to \
be ignored when mapping PVC dlcis to \
virtual ports. This allows the PVC map \
entries to be disabled/enabled without \
having to reenter the entire entry;
CAPABILITIES = ;rwobsolete Enumeration .micom-oscar.7.1.15.1.3 |
nvmFrPVCMapPhysIfIndexNAME = ;
DESC = Physical interface this PVC \
is associated with.;
HELP = ;
CAPABILITIES = ;rwobsolete INTEGER .micom-oscar.7.1.15.1.4 |
nvmFrDlcmiTableNAME = ;
DESC = The Parameters for the Data Link Connection \
Management Interface for the frame \
relay service on this interface.;
HELP = Table of standard RFC 1315 PVC LMI \
Parameters per interface (physical \
port);
CAPABILITIES = NET_CFG, VPN_DISP; SEQUENCE OF NvmFrDlcmiEntry .micom-oscar.7.1.16 |
nvmFrDlcmiEntryNAME = ;
DESC = The Parameters for a particular Data \
Link Connection Management Interface.;
HELP = Entry for the standard RFC 1315 PVC \
LMI parameters for an interface \
(physical port);
CAPABILITIES = ; NvmFrDlcmiEntry .micom-oscar.7.1.16.1 |
nvmFrDlcmiIfIndexNAME = ;
DESC = The ifIndex of the physical interface \
for the corresponding PVC LMI \
parameters to be updated;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.16.1.1 |
nvmFrDlcmiStateNAME = ;
DESC = This variable states which Data Link \
Connection Management scheme is \
active (and by implication, what \
DLCI it uses) on the Frame Relay \
interface.;
HELP = The type of PVC LMI active on this \
interface. The PVC LMI selected \
must be compatable with the network \
PVC LMI running. (If no PVCs are to \
be used, the 'noLmiConfigured' option \
may be selected.);
CAPABILITIES = ;rw Enumeration .micom-oscar.7.1.16.1.2 |
nvmFrDlcmiAddressNAME = ;
DESC = This variable states which address \
format is in use on the Frame Relay \
interface.;
HELP = Must match the address format used by the \
network;
CAPABILITIES = ;rw Enumeration .micom-oscar.7.1.16.1.3 |
nvmFrDlcmiAddressLenNAME = ;
DESC = This variable states which address \
length in octets.;
HELP = In the case of \
Q922 format, the length indicates the \
entire length of the address including \
the control portion. Used with \
the address type to identify \
a PVC. This value must match the \
address length used by the network;
CAPABILITIES = ;rw Enumeration .micom-oscar.7.1.16.1.4 |
nvmFrDlcmiPollingIntervalNAME = ;
DESC = This is the number of seconds between \
successive status enquiry messages.;
HELP = How often the PVC LMI status enquiry \
messages will be sent on the \
corresponding interface (measured \
in seconds);
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.16.1.5 |
nvmFrDlcmiFullEnquiryIntervalNAME = ;
DESC = Number of status enquiry intervals \
that pass before issuance of a full \
status enquiry message.;
HELP = How often a full status enquiry message \
will be sent. Measured in units of \
status enquiry interval. (Every nth \
status enquiry will be a full status \
enquiry.);
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.16.1.6 |
nvmFrDlcmiErrorThresholdNAME = ;
DESC = This is the maximum number of \
unanswered Status Enquiries the equipment \
shall accept before declaring the LMI \
down.;
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.16.1.7 |
nvmFrDlcmiMonitoredEventsNAME = ;
DESC = This is the number of status polling \
intervals over which the error threshold \
is counted.;
HELP = If within \
'MonitoredEvents' number of events \
the station receives 'ErrorThreshold' \
number of errors, the interface is \
marked as down.;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.16.1.8 |
nvmFrDlcmiMaxSupportedVCsNAME = ;
DESC = The maximum number of Virtual Circuits \
allowed for this interface.;
HELP = Dictated by the Frame Relay network. In \
response to a SET, if a value less \
than zero or higher than the agent's \
maximal capability is configured, the \
agent should respond bad- Value;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.16.1.9 |
nvmFrDlcmiMulticastNAME = ;
DESC = This indicates whether the Frame Relay \
interface is using a multicast service.;
HELP = The network \
must support a multicast service;
CAPABILITIES = ;rw Enumeration .micom-oscar.7.1.16.1.10 |
mcmFrAllSVCCircuitTableNAME = ;
DESC = Table of entries for all SVCs on this \
access device.;
HELP = A table containing information \
about specific SVC DLCIs;
CAPABILITIES = NET_CFG, VPN_DISP; SEQUENCE OF McmFrAllCircuitEntry .micom-oscar.7.1.17 |
mcmFrAllSVCCircuitEntryNAME = ;
DESC = The information regarding a \
single, established SVC DLCI;
HELP = ;
CAPABILITIES = ; McmFrAllCircuitEntry .micom-oscar.7.1.17.1 |
mcmFrAllSVCCircuitIfIndexNAME = ;
DESC = The ifIndex Value of the ifEntry \
this SVC virtual circuit is
associated with;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.17.1.1 |
mcmFrAllSVCCircuitDlciNAME = ;
DESC = The local DLCI for this SVC, valid \
only when the connection has been \
established;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.17.1.2 |
mcmFrAllSVCCircuitTypeNAME = ;
DESC = The type of this SVC.;
HELP = Valid types include voice, switched or \
rfc1490;
CAPABILITIES = ;ro Enumeration .micom-oscar.7.1.17.1.3 |
mcmFrAllSVCCircuitDNANAME = ;
DESC = DNA of the destination node associated \
with the SVC;
HELP = ;
CAPABILITIES = ;ro OCTET STRING .micom-oscar.7.1.17.1.4 |
mcmFrAllSVCCircuitStateNAME = ;
DESC = Indication for the state of this SVC (active \
or inactive).;
HELP = Only the configured SVCs \
can be in the inactive state (all learned \
SVCs will be deleted when the connection \
has been released);
CAPABILITIES = ;ro Enumeration .micom-oscar.7.1.17.1.5 |
mcmFrAllSVCCircuitReceivedFECNsNAME = ;
DESC = Number of frames received from \
the network indicating forward \
congestion since this switched \
virtual circuit was created;
HELP = Number of Frame Relay Packets \
received on the corresponding \
DLCI with the Forward congestion \
bit set;
CAPABILITIES = ;ro Counter .micom-oscar.7.1.17.1.6 |
mcmFrAllSVCCircuitReceivedBECNsNAME = ;
DESC = Number of frames received from \
the network indicating backward \
congestion since this switched \
virtual circuit was created;
HELP = Number of Frame Relay Packets received \
on the corresponding interface with the \
backward congestion bit set.;
CAPABILITIES = ;ro Counter .micom-oscar.7.1.17.1.7 |
mcmFrAllSVCCircuitSentFramesNAME = ;
DESC = The number of frames sent from \
this switched virtual circuit \
since this counter was last \
reset;
HELP = Number of Frame Relay Packets sent \
on the corresponding SVC since this \
counter was last reset (either by \
reboot of access device or a counter reset \
initiated by a user...Note that \
user initiated counter resets have been OBSOLETED \
for software releases beginning with Release 3.0.);
CAPABILITIES = ;ro Counter .micom-oscar.7.1.17.1.8 |
mcmFrAllSVCCircuitSentOctetsNAME = ;
DESC = The number of octets sent from \
this switched virtual circuit since \
it was last created or reset;
HELP = Number of bytes sent on the \
corresponding SVC since this counter \
was last reset (either by reboot of access device \
or a counter reset initiated by a user...Note that \
user initiated counter resets have been OBSOLETED \
for software releases beginning with Release 3.0.);
CAPABILITIES = ;ro Counter .micom-oscar.7.1.17.1.9 |
mcmFrAllSVCCircuitReceivedFramesNAME = ;
DESC = Number of frames received over \
this virtual circuit since it \
was created or the counter was \
last reset;
HELP = Reset may occur either by reboot \
or a counter reset initiated by a user...Note that \
user initiated counter resets have been OBSOLETED \
for software releases beginning with Release 3.0.;
CAPABILITIES = ;ro Counter .micom-oscar.7.1.17.1.10 |
mcmFrAllSVCCircuitReceivedOctetsNAME = ;
DESC = Number of octets received over \
this virtual circuit since it \
was created or the counter was \
last reset;
HELP = Reset may occur either by reboot \
or a counter reset initiated by a user...Note that \
user initiated counter resets have been OBSOLETED \
for software releases beginning with Release 3.0.;
CAPABILITIES = ;ro Counter .micom-oscar.7.1.17.1.11 |
mcmFrAllSVCCircuitCreationTimeNAME = ;
DESC = The value of sysUpTime when the \
switched virtual circuit was \
created;
HELP = The sysUpTime when the SVC was created \
either at bootup time or when the SVC \
was set up through Q.933, whether by the Data \
Link Connection Management Interface or \
by a SetRequest;
CAPABILITIES = ;ro TimeTicks (SNMPv2-SMI) .micom-oscar.7.1.17.1.12 |
mcmFrAllSVCCircuitCallOriginatorNAME = ;
DESC = DNA of the node that originated \
the call that resulted in \
the establishment of the SVC;
HELP = ;
CAPABILITIES = ;ro OCTET STRING .micom-oscar.7.1.17.1.13 |
mcmFrAllSVCCircuitLastTimeChangeNAME = ;
DESC = The value of sysUpTime when last
there was a change in the SVC;
HELP = SVCs established by the remote will set \
the last time change to the creation time;
CAPABILITIES = ;ro TimeTicks (SNMPv2-SMI) .micom-oscar.7.1.17.1.14 |
mcmFrAllSVCCircuitCommittedBurstNAME = ;
DESC = *******NOTE: THIS OBJECT IS DEPRECATED******* \
This information is redundant. This object has been \
replaced by mcmFrAllSVCCircuitNedTxThroughput and \
mcmAllFrCircuitNexRxThroughput which are objects \
from this same table(mcmFrAllSVCCircuitTable).;\
Maximum amount of data that the network agrees \
transfer under normal conditions over a set \
measurement interval.;
HELP = The maximum rate at which the network \
agrees to transfer under normal (non- \
congested) conditions (expressed in bits \
per second).;
CAPABILITIES = ;rodeprecated INTEGER .micom-oscar.7.1.17.1.15 |
mcmFrAllSVCCircuitExcessBurstNAME = ;
DESC = *******NOTE: THIS OBJECT IS DEPRECATED******* \
This information is redundant. This object has been \
replaced by mcmFrAllSVCCircuitNedTxThroughput and \
mcmAllFrCircuitNexRxThroughput which are objects \
from this same table(mcmFrAllSVCCircuitTable).;\
The maximum number of uncommited bits \
that the frame relay network will attempt \
to deliver (expressed in bits per second).; \
HELP = By default, if not configured when \
creating the entry, the Excess \
information Burst Size is set \
to the value of ifSpeed;
CAPABILITIES = ;rodeprecated INTEGER .micom-oscar.7.1.17.1.16 |
mcmFrAllSVCCircuitThroughputNAME = ;
DESC = The average number of 'Frame Relay \
Information Field' bits transferred \
per second across a physical frame relay \
interface.;
HELP = Throughput is the average number of \
'Frame Relay Information Field' \
bits transferred per second across a \
user network interface in one \
direction, measured over the set \
measurement interval. If the configured \
commited burst rate and throughput \
are both non-zero, the measurement interval \
T=mcmFrAllSVCCircuitCommittedBurst/mcmFrSVC- \
CircuitThroughput. If the configured \
committed burst rate and throughput are \
both zero, the measurement interval\
T=mcmFrAllSVCCircuitExcessBurst/ifSpeed;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.17.1.17 |
mcmFrAllSVCCircuitNegMaxTxSizeNAME = ;
DESC = The negotiated maximum Tx size to \
be sent on this interface (in bytes).;
HELP =;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.17.1.18 |
mcmFrAllSVCCircuitNegMaxRxSizeNAME = ;
DESC = The negotiated maximum Rx size to \
be received on this interface (in bytes).;
HELP =;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.17.1.19 |
mcmFrAllSVCCircuitNegTxThroughputNAME = ;
DESC = The negotiated Tx throughput to \
be sent on this interface (in bits/sec).;
HELP =;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.17.1.20 |
mcmFrAllSVCCircuitNegRxThroughputNAME = ;
DESC = The negotiated Rx throughput to \
be received on this interface (in bits/sec).;
HELP =;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.17.1.21 |
mcmFrAllSVCCircuitNegTxBurstNAME = ;
DESC = The negotiated Tx committed burst to \
be sent on this interface (in bits/sec).;
HELP =;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.17.1.22 |
mcmFrAllSVCCircuitNegRxBurstNAME = ;
DESC = The negotiated Rx committed burst to \
be received on this interface (in bits/sec).;
HELP =;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.17.1.23 |
mcmFrAllSVCCircuitNegTxExcessNAME = ;
DESC = The negotiated Tx excess burst to \
be sent on this interface (in bits/sec).;
HELP =;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.17.1.24 |
mcmFrAllSVCCircuitNegRxExcessNAME = ;
DESC = The negotiated Rx excess burst to \
be received on this interface (in bits/sec).;
HELP =;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.17.1.25 |
mcmFrAllSVCCircuitTxDiscardCIRPoliceNAME = ;
DESC = The number of packets that have been discarded \
due to policing of the CIR.;
HELP =;
CAPABILITIES = ;ro Counter .micom-oscar.7.1.17.1.26 |
mcmFrAllSVCCircuitPriorityNAME = ;
DESC = The transfer priority used for connection \
setup of this SVC.;
HELP = Valid priorities are 0 (LAN), 6 (NMSNAS) \
and 11 (voice);
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.17.1.27 |
mcmFrAllSVCCircuitSvcIfIndexNAME = ;
DESC = For Software releases beginning with R3.0, \
this object indicates the ifIndex of the tunneling \
PVC in which the SVC is established. Prior to \
R3.0, this object indicates the physical interface \
this SVC DLCI is assoiciated with.;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.17.1.28 |
mcmFrAllSVCCircuitDiscardPriorityNAME = ;
DESC = The discard priority used in \
setting the SVC circuit.;
HELP = ;
CAPABILITIES = ;rw Enumeration .micom-oscar.7.1.17.1.29 |
mcmFrAllSVCCircuitSetupPriorityNAME = ;
DESC = This object indicates the priority of a path at \
call-establishment time, and also determines \
the potential for bumping established paths \
to acquire their bandwidth. A value of 1 is \
the highest priority, and 5 is the lowest.;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.17.1.30 |
mcmFrAllSVCCircuitHoldingPriorityNAME = ;
DESC = This object indicates the priority that a path \
maintains once the path is established, and \
also determines the likelihood of being bumped \
by a new path, thus losing the bandwidth. A value \
of 1 is the highest priority, and 5 is the lowest.;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.17.1.31 |
mcmFrLANSpvcTableNAME = ;
DESC = The Frame Relay LAN SPVC Connections \
table(Operational);
HELP = ;
CAPABILITIES =NET_CFG, VPN_CFG; SEQUENCE OF McmFrLANSpvcEntry .micom-oscar.7.1.18 |
mcmFrLANSpvcEntryNAME = ;
DESC = An entry in the Frame Relay LAN SPVC \
Connections table. (Operational);
HELP = ;
CAPABILITIES = ; McmFrLANSpvcEntry .micom-oscar.7.1.18.1 |
mcmFrLANSpvcVirtualPortIfIndexNAME = ;
DESC = The ifIndex of the local Virtual Port \
(Analogous to the ifIndex pointer in the \
MIB II Interfaces Group, but specific to \
the FR End-to-End Connections table.)
(Operationsl);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.18.1.1 |
mcmFrLANSpvcRemoteDLCINAME = ;
DESC = The DLCI value on the remote DCE interface.
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.18.1.2 |
mcmFrLANSpvcConnectIdNAME = ;
DESC = The connect ID of this SPVC mapping.\
Used to associate SVCs and Connect \
mappings.(Operational)
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.18.1.3 |
mcmFrLANSpvcRemoteDNANAME = ;
DESC = The DNA of the remote node with which \
the SVC will be established. (Operational);
HELP = ;
CAPABILITIES = ;ro DisplayString .micom-oscar.7.1.18.1.4 |
mcmFrLANSpvcDLCINAME = ;
DESC = The DLCI value of the SVC once \
the SVC has been established.
(Operational);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.18.1.5 |
mcmFrLANSpvcIfIndexNAME = ;
DESC = For Software releases beginning with R3.0, \
this object indicates the ifIndex of the tunneling \
PVC in which the SVC is established. Prior to \
R3.0, this object indicates the ifIndex used for the \
SVC connection. (Operational)
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.18.1.6 |
mcmFrLANSpvcVPStateNAME = ;
DESC = The value of this object indicates \
whether the local Virtual Port with \
this mapping is active or inactive. \
(Operational);
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.7.1.18.1.7 |
mcmFrLANSpvcSVCStateNAME = ;
DESC = The value of this object indicates \
whether the local DCE considers the \
SVC associated with this mapping \
active or inactive.(Operational);
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.7.1.18.1.8 |
mcmFrLANSpvcConnTypeNAME = ;
DESC = The value of this object indicates \
whether this end of the SPVC segment \
initiated the SVC call.;
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.7.1.18.1.9 |
mcmFrLANSpvcLastChangeNAME = ;
DESC = The value of MIB II's sysUpTime at \
the time this SVC mapping entered \
its current operations state the \
high to low direction;
HELP = ;
CAPABILITIES = ;ro TimeTicks (SNMPv2-SMI) .micom-oscar.7.1.18.1.10 |
mcmFrLANSpvcDisconnectReasonNAME = ;
DESC = The value of this object indicates \
the reason why the SPVC is not \
active. (Operational);
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.7.1.18.1.11 |
mcmFrLANSpvcSVCTableNAME = ;
DESC = The Frame Relay SVC Connect (Switched) \
Segment Configuration table.
HELP = ;
CAPABILITIES =NET_CFG, VPN_CFG; SEQUENCE OF McmFrLANSpvcSVCEntry .micom-oscar.7.1.19 |
mcmFrLANSpvcSVCEntryNAME = ;
DESC = An entry in the Frame Relay LAN SPVC \
Connections table.;
HELP = ;
CAPABILITIES = ; McmFrLANSpvcSVCEntry .micom-oscar.7.1.19.1 |
mcmFrLANSpvcSVCConnectIdNAME = ;
DESC = The Connect Id of the Connection \
group entry to which this SVC \
belongs.
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.19.1.1 |
mcmFrLANSpvcSVCIfIndexNAME = ;
DESC = For Software releases beginning with R3.0, \
this object indicates the ifIndex of the tunneling \
PVC in which the SVC is established. Prior to \
R3.0, this object indicates the ifIndex of the local \
frame relay physical line interface.
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.19.1.2 |
mcmFrLANSpvcSVCDNANAME = ;
DESC = The DNA for the destination of \
the virtual circuit.;
HELP = ;
CAPABILITIES = ;ro DisplayString .micom-oscar.7.1.19.1.3 |
mcmFrLANSpvcSVCDLCINAME = ;
DESC = The local DLCI for this SVC. \
Valid only when the SVC is \
established. ;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.19.1.4 |
mcmFrLANSpvcSVCMaxTxSizeNAME = ;
DESC = The maximum transmission frame size. \
This should be equal to (or greater \
than) the Rx size for the corresponding \
PVC. Expressed in bytes.;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.19.1.5 |
mcmFrLANSpvcSVCMaxRxSizeNAME = ;
DESC = The maximum receivable frame size. \
This should be equal to (or less than) \
the Tx size for the corresponding PVC. \
Expressed in bytes.;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.19.1.6 |
mcmFrLANSpvcSVCMinTxThroughputNAME = ;
DESC = The minimum transmission throughput. \
This should be equal to (or greater than) \
the Rx CIR for the corresponding PVC. \
Expressed in bits/sec.;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.19.1.7 |
mcmFrLANSpvcSVCMinRxThroughputNAME = ;
DESC = The minimum receive throughput.\
This should be equal to (or less \
than) the Tx CIR for the corresponding \
PVC. Expressed in bits/sec.
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.19.1.8 |
mcmFrLANSpvcSVCMaxTxThroughputNAME = ;
DESC = The maximum transmission throughput.\
Always set to the value of \
mcmFrLANSpvcSVCMinTxThroughput.;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.19.1.9 |
mcmFrLANSpvcSVCMaxRxThroughputNAME = ;
DESC = The maximum receive throughput. \
Always set to the value of \
mcmFrLANSpvcSVCMinRxThroughput.;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.19.1.10 |
mcmFrLANSpvcSVCMaxTxBurstSizeNAME = ;
DESC = The maximum transmission burst size \
Computation based on throughput and \
Excess Burst. Expressed in bits/sec.;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.19.1.11 |
mcmFrLANSpvcSVCMaxRxBurstSizeNAME = ;
DESC = The maximum receive burst size. \
Computation based on throughput and \
Excess Burst. Expressed in bits/sec.;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.19.1.12 |
mcmFrLANSpvcSVCExcessTxBurstSizeNAME = ;
DESC = The maximum number of uncommitted \
bits that the network will attempt \
to accept. This should be equal to \
(or greater than) the Rx Be configured for
the corresponding PVC. Expressed in \
bits/sec.;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.19.1.13 |
mcmFrLANSpvcSVCExcessRxBurstSizeNAME = ;
DESC = The maximum number of uncommitted bits \
that the network will attempt to deliver. \
This should be equal to (or less than) the \
Tx Be configured for the corresponding PVC \
Expressed in bits/sec.;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.19.1.14 |
mcmFrLANSpvcSVCTransferPriorityNAME = ;
DESC = The transfer priority for the corresponding \
pass-through connection.
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.19.1.15 |
mcmFrLANSpvcSVCReasonForDisconnectNAME = ;
DESC = The reason for the SVC Disconnect.;
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.7.1.19.1.16 |
mcmFrLANSpvcSVCDiscardPriorityNAME = ;
DESC = The discard priority setup for \
the LAN SPVC SVC.;
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.7.1.19.1.17 |
mcmFrLANSpvcSVCSetupPriorityNAME = ;
DESC = This object indicates the priority of a path at \
call-establishment time, and also determines \
the potential for bumping established paths \
to acquire their bandwidth. A value of 1 is \
the highest priority, and 5 is the lowest.;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.19.1.18 |
mcmFrLANSpvcSVCHoldingPriorityNAME = ;
DESC = This object indicates the priority that a path \
maintains once the path is established, and \
also determines the likelihood of being bumped \
by a new path, thus losing the bandwidth. A value \
of 1 is the highest priority, and 5 is the lowest.;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.19.1.19 |
nvmFrLANSpvcTableNAME = ;
DESC = The Frame Relay LAN SPVC Connections \
table(Configurational);
HELP = ;
CAPABILITIES =NET_CFG, VPN_CFG; SEQUENCE OF NvmFrLANSpvcEntry .micom-oscar.7.1.20 |
nvmFrLANSpvcEntryNAME = ;
DESC = An entry in the Frame Relay LAN SPVC \
Connections table. (Configurational);
HELP = ;
CAPABILITIES = ; NvmFrLANSpvcEntry .micom-oscar.7.1.20.1 |
nvmFrLANSpvcVirtualPortIfIndexNAME = ;
DESC = The ifIndex of the local Virtual Port \
(Analogous to the ifIndex pointer in the \
MIB II Interfaces Group, but specific to \
the FR End-to-End Connections table.);
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.20.1.1 |
nvmFrLANSpvcRemoteDLCINAME = ;
DESC = The DLCI value on the remote DCE interface.
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.20.1.2 |
nvmFrLANSpvcConnectIdNAME = ;
DESC = The connect ID of this SPVC mapping.\
Used to associate SVCs and Connect \
mappings.;
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.20.1.3 |
nvmFrLANSpvcRemoteDNANAME = ;
DESC = The DNA of the remote node with which \
the SVC will be established.;
HELP = ;
CAPABILITIES = ;rw DisplayString .micom-oscar.7.1.20.1.4 |
nvmFrLANSpvcConnTypeNAME = ;
DESC = The value of this object indicates \
whether this end of the SPVC segment \
initiated the SVC call.;
HELP = ;
CAPABILITIES = ;rw Enumeration .micom-oscar.7.1.20.1.5 |
nvmFrLANSpvcRowStatusNAME = ;
DESC = This object is used to add new rows \
in the connection table, modify \
existing rows and to delete existing \
rows.;
HELP = ;
CAPABILITIES = ;rw Enumeration .micom-oscar.7.1.20.1.6 |
nvmFrLANSpvcSVCTableNAME = ;
DESC = The Frame Relay SVC Connect (Switched) \
Segment Configuration table.
HELP = ;
CAPABILITIES =NET_CFG, VPN_CFG; SEQUENCE OF NvmFrLANSpvcSVCEntry .micom-oscar.7.1.21 |
nvmFrLANSpvcSVCEntryNAME = ;
DESC = An entry in the Frame Relay LAN SPVC \
Connections table.;
HELP = ;
CAPABILITIES = ; NvmFrLANSpvcSVCEntry .micom-oscar.7.1.21.1 |
nvmFrLANSpvcSVCConnectIdNAME = ;
DESC = The Connect Id of the Connection \
group entry to which this SVC \
belongs.
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.21.1.1 |
nvmFrLANSpvcSVCDNANAME = ;
DESC = The DNA for the destination of \
the virtual circuit.;
HELP = ;
CAPABILITIES = ;rw DisplayString .micom-oscar.7.1.21.1.2 |
nvmFrLANSpvcSVCMaxTxSizeNAME = ;
DESC = The maximum transmission frame size. \
This should be equal to (or greater \
than) the Rx size for the corresponding \
PVC. Expressed in bytes.;
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.21.1.3 |
nvmFrLANSpvcSVCMaxRxSizeNAME = ;
DESC = The maximum receivable frame size. \
This should be equal to (or less than) \
the Tx size for the corresponding PVC. \
Expressed in bytes.;
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.21.1.4 |
nvmFrLANSpvcSVCMinTxThroughputNAME = ;
DESC = The minimum transmission throughput. \
This should be equal to (or greater than) \
the Rx CIR for the corresponding PVC. \
Expressed in bits/sec.;
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.21.1.5 |
nvmFrLANSpvcSVCMinRxThroughputNAME = ;
DESC = The minimum receive throughput.\
This should be equal to (or less \
than) the Tx CIR for the corresponding \
PVC. Expressed in bits/sec.
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.21.1.6 |
nvmFrLANSpvcSVCMaxTxThroughputNAME = ;
DESC = The maximum transmission throughput.\
Always set to the value of \
nvmFrLANSpvcSVCMinTxThroughput.;
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.21.1.7 |
nvmFrLANSpvcSVCMaxRxThroughputNAME = ;
DESC = The maximum receive throughput. \
Always set to the value of \
nvmFrLANSpvcSVCMinRxThroughput.;
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.21.1.8 |
nvmFrLANSpvcSVCMaxTxBurstSizeNAME = ;
DESC = The maximum transmission burst size \
Computation based on throughput and \
Excess Burst. Expressed in bits/sec.;
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.21.1.9 |
nvmFrLANSpvcSVCMaxRxBurstSizeNAME = ;
DESC = The maximum receive burst size. \
Computation based on throughput and \
Excess Burst. Expressed in bits/sec.;
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.21.1.10 |
nvmFrLANSpvcSVCExcessTxBurstSizeNAME = ;
DESC = The maximum number of uncommitted \
bits that the network will attempt \
to accept. This should be equal to \
(or greater than) the Rx Be configured for
the corresponding PVC. Expressed in \
bits/sec.;
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.21.1.11 |
nvmFrLANSpvcSVCExcessRxBurstSizeNAME = ;
DESC = The maximum number of uncommitted bits \
that the network will attempt to deliver. \
This should be equal to (or less than) the \
Tx Be configured for the corresponding PVC \
Expressed in bits/sec.;
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.21.1.12 |
nvmFrLANSpvcSVCTransferPriorityNAME = ;
DESC = The transfer priority for the corresponding \
pass-through connection.
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.21.1.13 |
nvmFrLANSpvcSVCDiscardPriorityNAME = ;
DESC = The discard priority setup for \
the LAN SPVC SVC.;
HELP = ;
CAPABILITIES = ;rw Enumeration .micom-oscar.7.1.21.1.14 |
nvmFrLANSpvcSVCSetupPriorityNAME = ;
DESC = This object specifies the priority of a path at \
call-establishment time, and also determines \
the potential for bumping established paths \
to acquire their bandwidth. A value of 1 is \
the highest priority, and 5 is the lowest.;
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.21.1.15 |
nvmFrLANSpvcSVCHoldingPriorityNAME = ;
DESC = This object specifies the priority that a path \
maintains once the path is established, and \
also determines the likelihood of being bumped \
by a new path, thus losing the bandwidth. A value \
of 1 is the highest priority, and 5 is the lowest.;
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.21.1.16 |
mcmFrDlcmiSVCStatusTableNAME = ;
DESC = Table of entries for Frame Relay Dlcmi SVC \
status for this access device. (Operational);
HELP =;
CAPABILITIES = NET_CFG, VPN_DISP; SEQUENCE OF McmFrDlcmiSVCStatusEntry .micom-oscar.7.1.22 |
mcmFrDlcmiSVCStatusEntryNAME = ;
DESC = A row or entry in the Frame Relay Dlcmi SVC \
status Table. (Operational);
HELP = ;
CAPABILITIES = ; McmFrDlcmiSVCStatusEntry .micom-oscar.7.1.22.1 |
mcmFrDlcmiSVCStatusIfIndexNAME = ;
DESC = The ifIndex Value associated with the \
netlink. (Operational);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.22.1.1 |
mcmFrDlcmiSVCStatusDlciNAME = ;
DESC = The SVC DLCI number associated with the \
netlink. (Operational);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.22.1.2 |
mcmFrDlcmiSVCStatusCardNumberNAME = ;
DESC = The card number linked to this \
netlink. (Operational);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.22.1.3 |
mcmFrDlcmiSVCStatusPortNumberNAME = ;
DESC = The physical port number linked to this \
netlink. (Operational);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.22.1.4 |
mcmFrDlcmiSVCStatusTunnelPvcDlciNAME = ;
DESC = The tunneling PVC DLCI number linked to \
this netlink. (Operational);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.22.1.5 |
mcmFrDlcmiSVCStatusPeerCardNumberNAME = ;
DESC = The card number linked to this netlink \
at the other side of the connection. (Operational);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.22.1.6 |
mcmFrDlcmiSVCStatusPeerPortNumberNAME = ;
DESC = The physical port number linked to this netlink \
at the other side of the connection. (Operational);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.22.1.7 |
mcmFrDlcmiSVCStatusPeerTunPvcDlciNAME = ;
DESC = The tunneling PVC DLCI number linked to this \
netlink at the other side of the connection. (Operational);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.22.1.8 |
mcmFrDlcmiSVCStatusPeerSvcDlciNAME = ;
DESC = The SVC DLCI number linked to this netlink \
at the other side of the connection. (Operational);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.22.1.9 |
mcmFrTunnelPvcTableNAME = ;
DESC = Table of entries for Frame Relay Tunnel PVCs \
for this access device. (Operational);
HELP =;
CAPABILITIES = NET_CFG, VPN_DISP; SEQUENCE OF McmFrTunnelPvcEntry .micom-oscar.7.1.23 |
mcmFrTunnelPvcEntryNAME = ;
DESC = A row or entry in the Frame Relay Tunnel PVC \
Table. (Operational);
HELP = ;
CAPABILITIES = ; McmFrTunnelPvcEntry .micom-oscar.7.1.23.1 |
mcmFrTunnelPvcIfIndexNAME = ;
DESC = The ifIndex of the tunnel PVC itself. \
(Operational);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.23.1.1 |
mcmFrTunnelPvcDlciNumberNAME = ;
DESC = The DLCI number for this PVC tunnel. \
(Operational);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.23.1.2 |
mcmFrTunnelPvcPhysicalCardNAME = ;
DESC = The Card (Logical Interface Module - LIM) \
of the WAN port (physical FR link). \
(Operational);
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.7.1.23.1.3 |
mcmFrTunnelPvcPhysicalPortNAME = ;
DESC = The channel number of this WAN port. \
(Operational);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.23.1.4 |
mcmFrTunnelPvcTypeNAME = ;
DESC = The FR tunnel PVC type. (Operational);
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.7.1.23.1.5 |
mcmFrTunnelPvcPhysPortIfIndexNAME = ;
DESC = The ifIndex of the FR physical port. \
(Operational);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.23.1.6 |
mcmFrTunnelPvcMaxRxFrameSizeNAME = ;
DESC = The maximum receive frame size in \
octets for this PVC tunnel data (sent into \
this unit). (Operational);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.23.1.7 |
mcmFrTunnelPvcRxBcNAME = ;
DESC = The receive committed burst size (Bc) in bits \
for this PVC tunnel data (sent into this unit). \
(Operational);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.23.1.8 |
mcmFrTunnelPvcRxBeNAME = ;
DESC = The receive excess burst size (Be) in bits \
for this PVC tunnel data (sent into this unit). \
(Operational);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.23.1.9 |
mcmFrTunnelPvcMaxRxCIRNAME = ;
DESC = The maximum received throughput in \
bits per second. Used for FECN/BECN \
management. (Operation);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.23.1.10 |
mcmFrTunnelPvcMaxTxFrameSizeNAME = ;
DESC = The maximum transmission frame size in \
octets for this PVC tunnel data (sent out of \
this unit). (Operational);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.23.1.11 |
mcmFrTunnelPvcTxBcNAME = ;
DESC = The transmission committed burst size (Bc) in bits \
for this PVC tunnel data (sent out of this unit). \
(Operational);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.23.1.12 |
mcmFrTunnelPvcTxBeNAME = ;
DESC = The transmission excess burst size (Be) in bits \
for this PVC tunnel data (sent out of this unit). \
(Operational);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.23.1.13 |
mcmFrTunnelPvcMaxTxCIRNAME = ;
DESC = The maximum transmit throughput in \
bits per second. Used for FECN/BECN \
management. (Operation);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.23.1.14 |
mcmFrTunnelPvcStateNAME = ;
DESC = This object indicates the current state \
of the PVC DLCI. (Operational);
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.7.1.23.1.15 |
mcmFrTunnelPvcRxFramesNAME = ;
DESC = The number of frames received for this \
PVC tunnel. (Operational);
HELP = ;
CAPABILITIES = ;ro Counter .micom-oscar.7.1.23.1.16 |
mcmFrTunnelPvcTxFramesNAME = ;
DESC = The number of frames transmitted in this \
PVC tunnel (regardless whether they are Bc \
or Be frames). (Operational);
HELP = ;
CAPABILITIES = ;ro Counter .micom-oscar.7.1.23.1.17 |
mcmFrTunnelPvcRxDeFramesNAME = ;
DESC = The number of frames received for this \
PVC tunnel (ingress) with the DE bit set \
to one. (Operational);
HELP = ;
CAPABILITIES = ;ro Counter .micom-oscar.7.1.23.1.18 |
mcmFrTunnelPvcRxExcessFramesNAME = ;
DESC = The number of frames received for this \
PVC tunnel (ingress) which were treated as \
excess traffic. (Operational);
HELP = ;
CAPABILITIES = ;ro Counter .micom-oscar.7.1.23.1.19 |
mcmFrTunnelPvcTxExcessFramesNAME = ;
DESC = The number of frames transmitted in this \
PVC tunnel (egress) which were treated as \
excess traffic. The DE bit may be set to one.\
(Operational);
HELP = ;
CAPABILITIES = ;ro Counter .micom-oscar.7.1.23.1.20 |
mcmFrTunnelPvcRxDiscardsNAME = ;
DESC = The number of frames received for this \
PVC tunnel (ingress) that were discarded due \
to traffic enforcement. (Operational);
HELP = ;
CAPABILITIES = ;ro Counter .micom-oscar.7.1.23.1.21 |
mcmFrTunnelPvcRxOctetsNAME = ;
DESC = The number of octets received for this \
PVC tunnel (ingress). (Operational);
HELP = ;
CAPABILITIES = ;ro Counter .micom-oscar.7.1.23.1.22 |
mcmFrTunnelPvcTxOctetsNAME = ;
DESC = The number of octets transmitted in this \
PVC tunnel (egress). (Operational);
HELP = ;
CAPABILITIES = ;ro Counter .micom-oscar.7.1.23.1.23 |
mcmFrTunnelPvcConsecFramesNAME = ;
DESC = The number of consecutive frames received\
with the BECN bit set before reducing \
the transmit rate. Used for FECN/BECN \
management. (Operation);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.23.1.24 |
mcmFrTunnelPvcMinTxCIRNAME = ;
DESC = The minimum transmit throughput in \
bits per second. Used for FECN/BECN \
management. (Operation);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.23.1.25 |
nvmFrTunnelPvcTableNAME = ;
DESC = Table of entries for Frame Relay Tunnel PVCs \
for this access device. (Configuration);
HELP =;
CAPABILITIES = NET_CFG, VPN_DISP; SEQUENCE OF NvmFrTunnelPvcEntry .micom-oscar.7.1.24 |
nvmFrTunnelPvcEntryNAME = ;
DESC = A row or entry in the Frame Relay Tunnel PVC \
Table. (Configuration);
HELP = ;
CAPABILITIES = ; NvmFrTunnelPvcEntry .micom-oscar.7.1.24.1 |
nvmFrTunnelPvcIfIndexNAME = ;
DESC = The ifIndex of the tunnel PVC itself. \
(Configuration);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.24.1.1 |
nvmFrTunnelPvcDlciNumberNAME = ;
DESC = The DLCI number for this PVC tunnel. \
Note that this object may only be configured \
during row creation. (Configuration);
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.24.1.2 |
nvmFrTunnelPvcPhysicalCardNAME = ;
DESC = The Card (Logical Interface Module - LIM) \
of the WAN port (physical FR link). \
Note that this object may only be configured \
during row creation. (Configuration);
HELP = ;
CAPABILITIES = ;rw Enumeration .micom-oscar.7.1.24.1.3 |
nvmFrTunnelPvcPhysicalPortNAME = ;
DESC = The channel number of this WAN port. \
Note that this object may only be configured \
during row creation. (Configuration);
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.24.1.4 |
nvmFrTunnelPvcTypeNAME = ;
DESC = The FR tunnel PVC type. \
Note that this object may only be configured \
during row creation. (Configuration);
HELP = ;
CAPABILITIES = ;rw Enumeration .micom-oscar.7.1.24.1.5 |
nvmFrTunnelPvcPhysPortIfIndexNAME = ;
DESC = The ifIndex of the FR physical port. \
(Configuration);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.24.1.6 |
nvmFrTunnelPvcMaxRxFrameSizeNAME = ;
DESC = The maximum receive frame size in \
octets for this PVC tunnel data (sent into \
this unit). (Configuration);
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.24.1.7 |
nvmFrTunnelPvcRxBcNAME = ;
DESC = The receive committed burst size (Bc) in bits \
for this PVC tunnel data (sent into this unit). \
(Configuration);
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.24.1.8 |
nvmFrTunnelPvcRxBeNAME = ;
DESC = The receive excess burst size (Be) in bits \
for this PVC tunnel data (sent into this unit). \
(Configuration);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.24.1.9 |
nvmFrTunnelPvcMaxRxCIRNAME = ;
DESC = The maximum received throughput in \
bits per second. Used for FECN/BECN \
management. (Configuration);
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.24.1.10 |
nvmFrTunnelPvcMaxTxFrameSizeNAME = ;
DESC = The maximum transmission frame size in \
octets for this PVC tunnel data (sent out of \
this unit). (Configuration);
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.24.1.11 |
nvmFrTunnelPvcTxBcNAME = ;
DESC = The transmission committed burst size (Bc) in bits \
for this PVC tunnel data (sent out of this unit). \
(Configuration);
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.24.1.12 |
nvmFrTunnelPvcTxBeNAME = ;
DESC = The transmission excess burst size (Be) in bits \
for this PVC tunnel data (sent out of this unit). \
(Configuration);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.24.1.13 |
nvmFrTunnelPvcMaxTxCIRNAME = ;
DESC = The maximum transmit throughput in \
bits per second. Used for FECN/BECN \
management. (Configuration);
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.24.1.14 |
nvmFrTunnelPvcRowStatusNAME = ;
DESC = This object is used to add new rows or delete \
existing rows in this FR Tunneling PVC \
table. (Configuration);
HELP = ;
CAPABILITIES = ;rw Enumeration .micom-oscar.7.1.24.1.15 |
nvmFrTunnelPvcConsecFramesNAME = ;
DESC = The number of consecutive frames received\
with the BECN bit set before reducing \
the transmit rate. Used for FECN/BECN \
management. (Configuration);
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.24.1.16 |
nvmFrTunnelPvcMinTxCIRNAME = ;
DESC = The minimum transmit throughput in \
bits per second. Used for FECN/BECN \
management. (Configuration);
HELP = ;
CAPABILITIES = ;rw INTEGER .micom-oscar.7.1.24.1.17 |
mcmFrNetlinkMapTableNAME = ;
DESC = Table for mapping Netlinks (Tunnel PVC ifIndex \
values) to Virtual Ports. (Operational);
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP; SEQUENCE OF McmFrNetlinkMapEntry .micom-oscar.7.1.25 |
mcmFrNetlinkMapEntryNAME = ;
DESC = Entry in the table for mapping Netlinks \
(Tunnel PVC ifIndex values) to Virtual \
Ports. (Operational);
HELP = ;
CAPABILITIES = ; McmFrNetlinkMapEntry .micom-oscar.7.1.25.1 |
mcmFrNetlinkMapVPIfIndexNAME = ;
DESC = Virtual port ifIndex associated \
with this Netlink (Tunnel PVC). \
(Operational);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.25.1.1 |
mcmFrNetlinkMapNetlinkIfIndexNAME = ;
DESC = Netlink (Tunnel PVC) ifIndex associated \
with the specified Virtual Port. \
(Operational);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.25.1.2 |
mcmFrNetlinkMapOperStatusNAME = ;
DESC = This object is used to indicate the operational \
status of the Tunnel PVC. (Operational);
HELP = ;
CAPABILITIES = ;ro Enumeration .micom-oscar.7.1.25.1.3 |
nvmFrNetlinkMapTableNAME = ;
DESC = Table for mapping Netlinks (Tunnel PVC ifIndex \
values) to Virtual Ports. (Configuration);
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP; SEQUENCE OF NvmFrNetlinkMapEntry .micom-oscar.7.1.26 |
nvmFrNetlinkMapEntryNAME = ;
DESC = Entry in the table for mapping Netlinks \
(Tunnel PVC ifIndex values) to Virtual \
Ports. (Configuration);
HELP = ;
CAPABILITIES = ; NvmFrNetlinkMapEntry .micom-oscar.7.1.26.1 |
nvmFrNetlinkMapVPIfIndexNAME = ;
DESC = Virtual port ifIndex associated \
with this Netlink (Tunnel PVC). \
(Configuration);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.26.1.1 |
nvmFrNetlinkMapNetlinkIfIndexNAME = ;
DESC = Netlink (Tunnel PVC) ifIndex associated \
with the specified Virtual Port. \
(Configuration);
HELP = ;
CAPABILITIES = ;ro INTEGER .micom-oscar.7.1.26.1.2 |
nvmFrNetlinkMapRowStatusNAME = ;
DESC = This object is used to add new rows or delete \
existing rows in this Virtual Port to Netlink \
Mapping table. (Configuration) ;
HELP = ;
CAPABILITIES = ;rw Enumeration .micom-oscar.7.1.26.1.3 |
fr-control OBJECT IDENTIFIER .micom-oscar.7.2 |
mcmFrPhyPortCntrTableNAME = ;
DESC = This table has been OBSOLETED for software \
releases beginning with Release 3.0. \
Table to reset Frame Relay physical \
port counters;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;obsolete SEQUENCE OF McmFrPhyPortCntrEntry .micom-oscar.7.2.1 |
mcmFrPhyPortCntrEntryNAME = ;
DESC = Entry in the Frame Relay Physical \
port counters table;
HELP = ;
CAPABILITIES = ;obsolete McmFrPhyPortCntrEntry .micom-oscar.7.2.1.1 |
mcmFrPhyPortCntrIfIndexNAME = ;
DESC = The ifIndex of the physical port whose \
counters are to be reset;
HELP = ;
CAPABILITIES = ;rwobsolete INTEGER .micom-oscar.7.2.1.1.1 |
mcmFrPhyPortCntrActionNAME = ;
DESC = Action to be taken on counters (reset);
HELP = When set to reset, the physical port \
counters should be zeroed out for the \
specified ifIndex;
CAPABILITIES = ;rwobsolete Enumeration .micom-oscar.7.2.1.1.2 |
mcmFrVirtualPortCntrTableNAME = ;
DESC = This table has been OBSOLETED for software \
releases beginning with Release 3.0. \
Table to reset the Frame Relay \
virtual port counters;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;obsolete SEQUENCE OF McmFrVirtualPortCntrEntry .micom-oscar.7.2.2 |
mcmFrVirtualPortCntrEntryNAME = ;
DESC = Entry in the virtual port counter \
table;
HELP = ;
CAPABILITIES = ;obsolete McmFrVirtualPortCntrEntry .micom-oscar.7.2.2.1 |
mcmFrVirtualPortCntrIfIndexNAME = ;
DESC = The ifIndex of the virtual port whose \
counters are to be reset;
HELP = ;
CAPABILITIES = ;rwobsolete INTEGER .micom-oscar.7.2.2.1.1 |
mcmFrVirtualPortCntrActionNAME = ;
DESC = Action to be taken on the counters (reset);
HELP = When set to reset, the virtual port \
counters should be zeroed out for the \
specified ifIndex;
CAPABILITIES = ;rwobsolete Enumeration .micom-oscar.7.2.2.1.2 |
mcmFrPVCCntrTableNAME = ;
DESC = This table has been OBSOLETED for software \
releases beginning with Release 3.0. \
Table used to reset counters \
associated with the PVC;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;obsolete SEQUENCE OF McmFrPVCCntrEntry .micom-oscar.7.2.3 |
mcmFrPVCCntrEntryNAME = ;
DESC = Entry in the PVC counter reset \
table;
HELP = ;
CAPABILITIES = ;obsolete McmFrPVCCntrEntry .micom-oscar.7.2.3.1 |
mcmFrPVCCntrIfIndexNAME = ;
DESC = Ifindex associated with the pvc.;
HELP = The ifIndex of the physical port \
associated with the PVC whose \
counters are to be reset;
CAPABILITIES = ;rwobsolete INTEGER .micom-oscar.7.2.3.1.1 |
mcmFrPVCCntrDLCINAME = ;
DESC = The DLCI number of the PVC whose \
counters are to be reset;
HELP = ;
CAPABILITIES = ;rwobsolete INTEGER .micom-oscar.7.2.3.1.2 |
mcmFrPVCCntrActionNAME = ;
DESC = Action to be taken on the PVC \
counter (reset);
HELP = When set to reset, the PVC Counters \
get reset;
CAPABILITIES = ;rwobsolete Enumeration .micom-oscar.7.2.3.1.3 |
mcmFrSVCCntrTableNAME = ;
DESC = This table has been OBSOLETED for software \
releases beginning with Release 3.0. \
Table used to reset counters \
associated with the SVC;
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP;obsolete SEQUENCE OF McmFrSVCCntrEntry .micom-oscar.7.2.4 |
mcmFrSVCCntrEntryNAME = ;
DESC = Entry int the SVC Counter table;
HELP = ;
CAPABILITIES = ;obsolete McmFrSVCCntrEntry .micom-oscar.7.2.4.1 |
mcmFrSVCCntrIfIndexNAME = ;
DESC = Ifindex associated with the SVC \
for which the counters are to be\
reset;
HELP = ;
CAPABILITIES = ;rwobsolete INTEGER .micom-oscar.7.2.4.1.1 |
mcmFrSVCCntrDNANAME = ;
DESC = The DNA associated with the SVC \
whose counters are to be reset;
HELP = ;
CAPABILITIES = ;rwobsolete OCTET STRING .micom-oscar.7.2.4.1.2 |
mcmFrSVCCntrActionNAME = ;
DESC = Action to take on the SVC \
counters (reset);
HELP = When set to reset, the SVC \
counters should be reset;
CAPABILITIES = ;rwobsolete Enumeration .micom-oscar.7.2.4.1.3 |